OPTIX-PKT-SYS-SYN-MIB
34 objects
This MIB describes configurations ofsystem clock source management.
Imported Objects
| OPTIX-BOARD-MANAGE-MIB | optixLogBoardId |
| OPTIX-OID-MIB | optixProvisionPtn |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.50.35 | IdentityoptixpktSYSsyn | This MIB describes configurations ofsystem clock source management. | ||
| 1.3.6.1.2.1.10.4.50.35.1 | NodeoptixpktSYSsynGroup | |||
| 1.3.6.1.2.1.10.4.50.35.1.1 | TableoptixpktSYSsynTable | not-accessible | current | This table contains configuration information of system clock sources. |
| 1.3.6.1.2.1.10.4.50.35.1.1.1 | RowoptixpktSYSsynEntry | not-accessible | current | This table contains configuration information of system clock sources. |
| 1.3.6.1.2.1.10.4.50.35.1.1.1.1 | ColumnoptixpktSYSsynCurSyn | read-only | current | This parameter specifies current SDH clock source. Value range: 0x01ff0001 to 0x06ff0006 with 0x00f00001, 0x00f00002, and 0x00f10001. |
| 1.3.6.1.2.1.10.4.50.35.1.1.1.2 | ColumnoptixpktSYSCurSynS1Value | read-only | current | This parameter specifies the s1 value of the current clock source. 0: qlUnknown, 2: qlPrc, 4: qlSsua, 8: qlSsub, 11: qlSec, 15: qlDnu |
| 1.3.6.1.2.1.10.4.50.35.1.1.1.3 | ColumnoptixpktSYSsynPriTableCLkList | read-write | current | This parameter specifies the list of clock source priorities. |
| 1.3.6.1.2.1.10.4.50.35.1.1.1.4 | ColumnoptixpktSYSsyn24HourKeepMode | read-write | current | This parameter specifies the 24 hour keep mode of SDH clock sources. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.50.35.1.1.1.5 | ColumnoptixpktSYSsynSwState | read-only | current | This parameter specifies the switching state. 0: synAuto, 1: synMan, 2: synForce |
| 1.3.6.1.2.1.10.4.50.35.1.1.1.6 | ColumnoptixpktsynProtectSynWtrTime | read-write | current | This parameter specifies the clock source WTR time. Value range: 0 to 12 (unit: minute). |
| 1.3.6.1.2.1.10.4.50.35.1.1.1.7 | ColumnoptixpktSYSclkpllLockstate | read-only | current | This parameter specifies the system clock PLL lock state. |
| 1.3.6.1.2.1.10.4.50.35.1.1.1.8 | ColumnoptixpktSysSynWorkMode | read-only | current | This parameter specifies working mode. 1: trace, 2: keep, 3: free |
| 1.3.6.1.2.1.10.4.50.35.1.2 | TableoptixpktSYSsynClassTable | not-accessible | current | This table contains configuration information of system clock lists. |
| 1.3.6.1.2.1.10.4.50.35.1.2.1 | RowoptixpktSYSsynClassEntry | not-accessible | current | This entry containing configuration information of system clock lists. |
| 1.3.6.1.2.1.10.4.50.35.1.2.1.1 | ColumnoptixpktSSMExQulity | read-write | current | This parameter specifies the SSM protocol configuration of the clock source. Value range: 0x00, 0x02, 0x04, 0x08, 0x0b, 0x0f, and 0xff. |
| 1.3.6.1.2.1.10.4.50.35.1.2.1.2 | ColumnoptixpktsysSSMEnableFlag | read-write | current | This object indicates the enable status of the SSM protocol. 1: permit, 0: forbid |
| 1.3.6.1.2.1.10.4.50.35.1.2.1.3 | ColumnoptixpktSSMsynClkIdMode | read-write | current | This object indicates the enable status of forbidding the output of SSM protocol clock ID. 1: permit, 0: forbid |
| 1.3.6.1.2.1.10.4.50.35.1.2.1.4 | ColumnoptixpktSYSsynStatus | read-only | current | This parameter specifies the clock source status. 0: invalid, 1: valid |
| 1.3.6.1.2.1.10.4.50.35.1.2.1.5 | ColumnoptixpktsynProtectEnable | read-write | current | This parameter specifies the clock source protection enable status. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.50.35.1.2.1.6 | ColumnoptixpktsysSynSubNet | read-write | current | This parameter specifies the subnet ID. Value range: 0 to 255. |
| 1.3.6.1.2.1.10.4.50.35.1.2.1.7 | ColumnoptixpktsysSynNodeID | read-write | current | This parameter specifies the node ID. Value range: 0x00 to 0x0f. |
| 1.3.6.1.2.1.10.4.50.35.1.2.1.8 | ColumnoptixpktsysSynS1Mode | read-only | current | This node represents the clock source's S1 byte value: qlUnknown(0), qlPrc(2), qlSsua(4), qlSsub(8), qlSec(11), or qlDnu(15). |
| 1.3.6.1.2.1.10.4.50.35.1.2.1.9 | ColumnoptixpktsysSynSw | read-write | current | This node indicates switching or clearing the clock source: 0-clea, 1-manual, 2-force. |
| 1.3.6.1.2.1.10.4.50.35.1.3 | TableoptixpktSynGroupTable | not-accessible | current | Configuration information of the system clock source group |
| 1.3.6.1.2.1.10.4.50.35.1.3.1 | RowoptixpktSynGroupEntry | not-accessible | current | Entry to the configuration information of the system clock source group |
| 1.3.6.1.2.1.10.4.50.35.1.3.1.1 | ColumnoptixpktSynBoardID | not-accessible | current | System control board ID in a clock source group |
| 1.3.6.1.2.1.10.4.50.35.1.3.1.2 | ColumnoptixpktSynGroupid | not-accessible | current | Clock source group ID |
| 1.3.6.1.2.1.10.4.50.35.1.3.1.3 | ColumnoptixpktSynGroupSysNum | read-create | current | Number of clock sources in a clock source group |
| 1.3.6.1.2.1.10.4.50.35.1.3.1.4 | ColumnoptixpktSynGroupSysList | read-create | current | Clock source list |
| 1.3.6.1.2.1.10.4.50.35.1.3.1.255 | ColumnoptixpktSynGroupRowStatus | read-create | current | Row status of the clock source group |
| 1.3.6.1.2.1.10.4.50.35.2 | NodeoptixpktSYSsynNeGroup | |||
| 1.3.6.1.2.1.10.4.50.35.2.1 | ScalaroptixpktSYSsynCnorvt | read-write | current | This node describes whether the clock switching by the descending order of priorities is enabled. |
| 1.3.6.1.2.1.10.4.50.35.2.2 | ScalaroptixpktSYSsynQlunknowValue1 | read-write | current | The node describes the QL_UNKNOW-represented quality level 1. |
| 1.3.6.1.2.1.10.4.50.35.2.3 | ScalaroptixpktSYSsynQlunknowValue2 | read-write | current | The node describes the QL_UNKNOW-represented quality level 2. |