OPTIX-PMU-BOARD-MIB
48 objects
This MIB describes thePMU boardconfigurations.
Imported Objects
| OPTIX-BOARD-MANAGE-MIB | optixLogBoardId optixLogSubCardId |
| OPTIX-OID-MIB | optixProvisionEqpt |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.30.35 | IdentityoptixPMUBoard | This MIB describes thePMU boardconfigurations. | ||
| 1.3.6.1.2.1.10.4.30.35.1 | NodeoptixPMU | |||
| 1.3.6.1.2.1.10.4.30.35.1.1 | TableoptixPMUTable | not-accessible | current | This table describes the PMU board configurations. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1 | RowoptixPMUEntry | not-accessible | current | Thisentry describes the PMU board configurations. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.1 | ColumnoptixPMUAcHighthr | read-write | current | This object indicates the upper thresholdfor the PMU AC voltage alarms. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.2 | ColumnoptixPMUAcLowthr | read-write | current | This object indicates the lower threshold for the PMU AC voltage alarms. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.3 | ColumnoptixPMUDCHighthr | read-write | current | This object indicates the upper threshold for the PMU DC voltage alarms. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.4 | ColumnoptixPMUDCLowthr | read-write | current | This object indicates the lower threshold for the PMU DC voltage alarms. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.5 | ColumnoptixPMUEvolt | read-write | current | This object indicates the even charging PMU voltage. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.6 | ColumnoptixPMUFvolt | read-write | current | This object indicates the floating charging PMU voltage. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.7 | ColumnoptixPMULoadDownState | read-write | current | This object indicates the enable status of the load power-off function. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.8 | ColumnoptixPMULoadDownVolt | read-write | current | This object indicates the threshold of PMU load power-off voltage. 0: disable, 1: enable |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.9 | ColumnoptixPMUBtDownState | read-write | current | This object indicates the enable status of the load power-off PMU battery group. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.10 | ColumnoptixPMUBtDownVolt | read-write | current | This object indicates the threshold of PMUbattery group power-off voltage. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.11 | ColumnoptixPMUTempEnvHighThr | read-write | current | This object indicates the upper threshold of the PMU ambient temperature. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.12 | ColumnoptixPMUTempEnvLowThr | read-write | current | This object indicates the lower threshold of the PMU ambient temperature. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.13 | ColumnoptixPMUHumEnvHighThr | read-write | current | This object indicates the upper threshold of the PMU ambient humidity. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.14 | ColumnoptixPMUHumEnvLowThr | read-write | current | This object indicates thelower threshold of the PMU ambient humidity. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.15 | ColumnoptixPMUParasPSUNum | read-write | current | This object indicates the PMU number of power module. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.16 | ColumnoptixPMULimitFactor | read-write | current | This object indicates the limit factor of battary. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.17 | ColumnoptixPMUChargeTime | read-write | current | This object indicates the time of charge battary. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.18 | ColumnoptixPMUCompensateFactor | read-write | current | This parameter specifies the battary temp compensatefactor |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.19 | ColumnoptixPMUCtrlState | read-write | current | This parameter specifies ctrl state of PMU |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.20 | ColumnoptixPMUChargeState | read-write | current | This parameter specifies charge state of PMU |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.21 | ColumnoptixPMUCurrentLimit | read-only | current | This object indicates the stat of limit current of charge battery |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.22 | ColumnoptixPMUCtrlModeODC | read-only | current | This object indicates the ctrl state of charged battery |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.23 | ColumnoptixPMUChargeMode | read-only | current | This object indicates the state of PMU charge mode |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.24 | ColumnoptixPMUPowerDownState | read-only | current | This object indicates the state of power down |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.25 | ColumnoptixPMUPsuNum | read-only | current | This object indicates the number of PSU |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.26 | ColumnoptixPMUEnvironHumidity | read-only | current | This object indicates the environmental Humidity |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.27 | ColumnoptixPMUDcVolt | read-only | current | This object indicates the DC voltage. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.28 | ColumnoptixPMULoadCurrent | read-only | current | This object indicates the load current. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.29 | ColumnoptixPMUBatteryCurrent1 | read-only | current | This object indicates the current of battery1. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.30 | ColumnoptixPMUBatteryCurrent2 | read-only | current | This object indicates the current of battery2. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.31 | ColumnoptixPMUAcVolt | read-only | current | This object indicates the AC voltage. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.32 | ColumnoptixPMUHtempDownEnable | read-write | current | This object indicates the enable status of temp down para. |
| 1.3.6.1.2.1.10.4.30.35.1.1.1.33 | ColumnoptixPMUHighTempthre | read-write | current | This object indicates the para of temp down. |
| 1.3.6.1.2.1.10.4.30.35.1.2 | TableoptixPMUBatteryTable | not-accessible | current | This table contains basic battery information of PMU |
| 1.3.6.1.2.1.10.4.30.35.1.2.1 | RowoptixPMUBatteryEntry | not-accessible | current | This Entry containins basic battery information of PMU |
| 1.3.6.1.2.1.10.4.30.35.1.2.1.1 | ColumnoptixPMUBatteryNum | not-accessible | current | This parameter specifies the PMU index |
| 1.3.6.1.2.1.10.4.30.35.1.2.1.2 | ColumnoptixPMUBatteryCapacity | read-write | current | This parameter specifies the capacity of battery |
| 1.3.6.1.2.1.10.4.30.35.1.2.1.3 | ColumnoptixPMUBatteryTemp | read-only | current | This object indicates the temperature of battery |
| 1.3.6.1.2.1.10.4.30.35.1.2.1.4 | ColumnoptixPMUBatteryHighTh | read-write | current | This parameter specifies the high tempth of bid sbid |
| 1.3.6.1.2.1.10.4.30.35.1.2.1.5 | ColumnoptixPMUBatteryLowTh | read-write | current | This parameter specifies the low tempth of bid sbid |
| 1.3.6.1.2.1.10.4.30.35.1.3 | TableoptixPMUEnTempTable | not-accessible | current | this tabel indicates the environmental temperature |
| 1.3.6.1.2.1.10.4.30.35.1.3.1 | RowoptixPMUEnTempEntry | not-accessible | current | This Entry indicates environmental temperature |
| 1.3.6.1.2.1.10.4.30.35.1.3.1.1 | ColumnoptixPMUEnTempEnvNum | not-accessible | current | This object indicates the index of optixPMUEnTempTable. |
| 1.3.6.1.2.1.10.4.30.35.1.3.1.2 | ColumnoptixPMUEnvironTem | read-only | current | This object indicates the environmental temperature. |