OPTIX-PW-MIB
254 objects
This module is used to configure and manage MPLS PWs. The PWE3 is a Layer 2 service bearer technology that emulates the basic behaviors and characteristics of services such as ATM/IMA, Ethernet, and TDM on a packet switched network (PSN).Aided by the PWE3 technology, conventional networks can be connectedto a PSN. Therefore, resource sharing and network scaling can be achieved.
Imported Objects
| OPTIX-OID-MIB | optixProvisionPtn |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.50.6 | IdentityoptixPWMod | This module is used to configure and manage MPLS PWs. The PWE3 is a Layer 2 service bearer technology that emulates the basic behaviors and characteristics of … | ||
| 1.3.6.1.2.1.10.4.50.6.1 | NodeoptixPWObject | |||
| 1.3.6.1.2.1.10.4.50.6.1.1 | ScalaroptixNeTPId | read-write | current | When ETH services are carried through Ethernet tagged PWs, service VLAN must be added before the service payloads. This object is used tospecify theTP ID of th… |
| 1.3.6.1.2.1.10.4.50.6.1.2 | TableoptixStaticUcEthPWTable | not-accessible | current | This table implements the configurations of static unicast ETH PWs, including the PW type, label, tunnels carried on the PW, CW, VCCV, and applied VLAN. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1 | RowoptixStaticUcEthPWEntry | not-accessible | current | This entry indicates the parameter table of the static unicast ETH PWs. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.1 | ColumnoptixEthPWIndex | not-accessible | current | This object indicates the PW index, ranging from 1 to 0x00ffffff,0 means auto. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.2 | ColumnoptixEthPWtype | read-create | current | This object indcates the PW type. 0x0004: eth-tag 0x0005: eth-raw |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.3 | ColumnoptixEthPWId | read-create | current | This object indicates the PW ID. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.4 | ColumnoptixEthPWDirection | read-create | current | This object indicates the PW direction. 1: bi 2: uni |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.5 | ColumnoptixEthPWPosition | read-create | current | This object indicates the node location. 0: null 1: ingress 2: egress |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.6 | ColumnoptixEthPWInLabel | read-create | current | This object indicates the ingress label. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.7 | ColumnoptixEthPWOutLabel | read-create | current | This object indicates the egress label. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.8 | ColumnoptixEthPWPeerIp | read-create | current | This object indicates the peer IP address. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.9 | ColumnoptixEthPWTunnelIndex | read-create | current | This object indicates the index to the tunnel carried through the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.10 | ColumnoptixEthPWVccvctrlChnlType | read-create | current | This object indicates the control channel type. 0: none 1: cw 2: alertlabel 3: cwaltlb 4: ttl |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.11 | ColumnoptixEthPWVccvCheckType | read-create | current | This object indicates the verification mode. 0: none 1: ping 2: bfd 3 :pingbfd |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.12 | ColumnoptixEthPWCtrlWord | read-create | current | This object indicates the usage policy of the control word. 1: not-use 2: frt-use 3: mst-use |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.13 | ColumnoptixEthPWExp | read-create | current | This object indicates the EXP value. (Only upstream EXPs are supported.) Valid values:0-7. 0xff: The EXP value is invalid. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.14 | ColumnoptixEthPWLspMode | read-create | current | This object indicates the LSP mode.(Only the downstreamLSP is supported.) 1: uniform 2: pipe 255: none (The LSP mode is invalid upstream.) |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.15 | ColumnoptixEthPWEnable | read-create | current | This object indicates the enable status of the PW. 0: disable 1: enable |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.16 | ColumnoptixEthPWIngressIdBoundEgrTnl | read-create | current | This object indicates the source node ID of the bound egress tunnel. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.17 | ColumnoptixEthPWEgressIdBoundEgrTnl | read-create | current | This object indicates the sink node ID of the bound egress tunnel. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.18 | ColumnoptixEthPWTunnelIdBoundEgrTnl | read-create | current | This object idnicates the bound egress tunnel ID. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.19 | ColumnoptixEthPWEncapsulateVlanId | read-create | current | When ETH services are carried through Ethernet tagged PWs, service VLAN must be added before the service payloads. This object is used to specify the VLAN ID.V… |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.20 | ColumnoptixEthPWCheckRet | read-only | current | This object indicates the PW check result. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.21 | ColumnoptixEthPWSrvType | read-only | current | This object indicates the type of the service carried by the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.22 | ColumnoptixEthPWSrvIndex | read-only | current | This object indicates the index to the service carried by the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.23 | ColumnoptixEthPWSrvID | read-only | current | This object indicates the ID of the service carried by the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.24 | ColumnoptixEthPWLocalState | read-only | current | This object indicates the local state of the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.25 | ColumnoptixEthPWRemoteState | read-only | current | This object indicates the remote state of the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.26 | ColumnoptixEthPWState | read-only | current | This object indicates the PW state. |
| 1.3.6.1.2.1.10.4.50.6.1.2.1.255 | ColumnoptixEthPWRowStatus | read-create | current | This object indicates the row status. 1: active 4: createAndGo 6: destroy |
| 1.3.6.1.2.1.10.4.50.6.1.3 | TableoptixStaticUcAtmPWTable | not-accessible | current | This table implements the configurations of static unicastATM PWs, including PW type, label, tunnels carried on the PW, CW, VCCV, and ATM concatenation. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1 | RowoptixStaticUcAtmPWEntry | not-accessible | current | This entry indicates the parameter table of the static unicastATM PWs. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.1 | ColumnoptixAtmPWIndex | not-accessible | current | This object indicates the PW index, ranging from 1 to 0x00ffffff. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.2 | ColumnoptixAtmPWtype | read-create | current | This object indcates the PW type. 0x0003: atm-trans 0x0009: atm-nto1-vcc 0x000A: atm-nto1-vpc 0x000C: atm-1to1-vcc 0x000D: atm-1to1-vpc |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.3 | ColumnoptixAtmPWId | read-create | current | This object indicates the PW ID. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.4 | ColumnoptixAtmPWDirection | read-create | current | This object indicates the PW direction. 1: bi 2: uni |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.5 | ColumnoptixAtmPWPosition | read-create | current | This object indicates the node location. 0: null 1: ingress 2: egress |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.6 | ColumnoptixAtmPWInLabel | read-create | current | This object indicates the ingress label. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.7 | ColumnoptixAtmPWOutLabel | read-create | current | This object indicates the egress label. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.8 | ColumnoptixAtmPWPeerIp | read-create | current | This object indicates the peer IP address. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.9 | ColumnoptixAtmPWTunnelIndex | read-create | current | This object indicates the index to the tunnel carried through the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.10 | ColumnoptixAtmPWVccvctrlChnlType | read-create | current | This object indicates the control channel type. 0: none 1: cw 2: alertlabel 4: ttl |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.11 | ColumnoptixAtmPWVccvCheckType | read-create | current | This object indicates the verification mode. 0: none 1: ping 2: bfd |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.12 | ColumnoptixAtmPWCtrlWord | read-create | current | This object indicates the usage policy of the control word. 1: not-use 2: frt-use 3: mst-use |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.13 | ColumnoptixAtmPWExp | read-create | current | This object indicates the EXP value. (Only upstream EXPs are supported.) Valid values:0-7. 0xff: none |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.14 | ColumnoptixAtmPWLspMode | read-create | current | This object indicates the LSP mode.(Only the downstream LSPis supported.) 1: uniform 2: pipe 255: none (The LSP mode is invalid upstream.) |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.15 | ColumnoptixAtmPWEnable | read-create | current | This object indicates the enable status of the PW. 0: disable 1: enable |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.16 | ColumnoptixAtmPWIngressIdBoundEgrTnl | read-create | current | This object indicates the source node ID of the bound egress tunnel. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.17 | ColumnoptixAtmPWEgressIdBoundEgrTnl | read-create | current | This object indicates the sink node ID of the bound egress tunnel. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.18 | ColumnoptixAtmPWTunnelIdBoundEgrTnl | read-create | current | Thisobject indicates the bound egress tunnel ID. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.19 | ColumnoptixAtmPWMaxCellNum | read-create | current | This object indicates the maximum number of concatenate ATM cells. Valid values range from 1 to 31. 1: The ATM concatenation is disabled. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.20 | ColumnoptixAtmPWMaxLoadTime | read-create | current | This object indicates the longest waiting time for ATM concatenation. Valid values:100-50000. 0: The ATM concatenation is disabled. Unit:us; step: 100. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.21 | ColumnoptixAtmPWCheckRet | read-only | current | This object indicates the PW check result. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.22 | ColumnoptixAtmPWSrvType | read-only | current | This object indicates the type of the service carried by the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.23 | ColumnoptixAtmPWSrvIndex | read-only | current | This object indicates the index to the service carried by the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.24 | ColumnoptixAtmPWSrvID | read-only | current | This object indicates the ID of the service carried by the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.25 | ColumnoptixAtmPWLocalState | read-only | current | This object indicates the local state of the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.26 | ColumnoptixAtmPWRemoteState | read-only | current | This object indicates the remote state of the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.27 | ColumnoptixAtmPWState | read-only | current | This object indicates the PW state. |
| 1.3.6.1.2.1.10.4.50.6.1.3.1.255 | ColumnoptixAtmPWRowStatus | read-create | current | This object indicates the row status. 1: active 4: createAndGo 6: destroy |
| 1.3.6.1.2.1.10.4.50.6.1.4 | TableoptixStaticUcCesPWTable | not-accessible | current | This table implements the PW configurations of the static unicast CES service. These configurations include thePW type, label, tunnels carried by the PW, CW, V… |
| 1.3.6.1.2.1.10.4.50.6.1.4.1 | RowoptixStaticUcCesPWEntry | not-accessible | current | This entry indicates the parameter table of the static unicast CES PWs. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.1 | ColumnoptixCesPWIndex | not-accessible | current | This object indicates the PW index, ranging from 1 to 0x00ffffff. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.2 | ColumnoptixPCesPWtype | read-create | current | This object indcates the PW type. 0x0011: satop-e1 0x0015: cesopsn 0x0010: cep |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.3 | ColumnoptixCesPWId | read-create | current | This object indicates the PW ID. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.4 | ColumnoptixCesPWDirection | read-create | current | This object indicates the PW direction. 1: bi 2: uni} |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.5 | ColumnoptixCesPWPosition | read-create | current | This object indicates the node location. 0: null 1: ingress 2: egress |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.6 | ColumnoptixCesPWInLabel | read-create | current | This object indicates the ingress label. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.7 | ColumnoptixCesPWOutLabel | read-create | current | This object indicates the egress label. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.8 | ColumnoptixCesPWPeerIp | read-create | current | This object indicates the peer IP address. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.9 | ColumnoptixCesPWTunnelIndex | read-create | current | This object indicates the index to the tunnel carried through the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.10 | ColumnoptixCesPWVccvctrlChnlType | read-create | current | This object indicates the control channel type. 0: none 1: cw 2: alertlabel 3: cwaltlb 4: ttl |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.11 | ColumnoptixCesPWVccvCheckType | read-create | current | This object indicates the verification mode. 0: none 1: ping 2: bfd 3 :pingbfd |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.12 | ColumnoptixCesPWCtrlWord | read-create | current | This object indicates the usage policy of the control word. 1: not-use 2: frt-use 3: mst-use |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.13 | ColumnoptixCesPWExp | read-create | current | This object indicates the EXP value. (Only upstream EXPs are supported.) Valid values:0-7. 0xff: none |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.14 | ColumnoptixCesPWLspMode | read-create | current | This object indicates the LSP mode.(Only the downstream LSP is supported.) 1: uniform 2: pipe 255: none (the LSP mode is invalid upstream.) |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.15 | ColumnoptixCesPWEnable | read-create | current | This object indicates the enable status of the PW. 0: disable 1: enable |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.16 | ColumnoptixCesPWIngressIdBoundEgrTnl | read-create | current | This object indicates the source node ID of the bound egress tunnel. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.17 | ColumnoptixCesPWEgressIdBoundEgrTnl | read-create | current | This object indicates the sink node ID of the bound egress tunnel. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.18 | ColumnoptixCesPWTunnelIdBoundEgrTnl | read-create | current | This object indicates the bound egress tunnel ID. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.19 | ColumnoptixCesPWRtpHead | read-create | current | This object indicates the enable status of the RTP header encapsulation. 0: disable 1: enablehwrtp 2: enablestdrtp |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.20 | ColumnoptixCesPWLoadTime | read-create | current | This object indicates the packet loading time. Valid values: 125-5000 us; step: 125 |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.21 | ColumnoptixCesPWJitterTime | read-create | current | This object indicates the jitter buffer time. Valid values: 125-64000 us; step: 125 |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.22 | ColumnoptixCesPWEmulLevel | read-create | current | This object indicates the CES emulation level. 1: vc12 2: vc11 3: vc4 4: vc4 (3 x vc3) |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.23 | ColumnoptixCesPWPathNum | read-create | current | This object indicates the number of valid timeslots/channels. E1: 1-32; T1: 1-24; VC4: 1; VC4 (3 x VC3):3 |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.24 | ColumnoptixCesPWSNMode | read-create | current | This object indicates the serial-number mode. 0: stdmode; valid values range from 0 to 65535 and restart from 0. 1: hwmode; valid values range form 0 to 65535 … |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.25 | ColumnoptixCesPWLMREnable | read-create | current | This object indicates the processing status of the L, M, and R bits. 0: disable 1: enable |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.26 | ColumnoptixCesPWInRbit | read-create | current | This object indicates the threshold for entering the R bit insertion status. Valid values: 1-65535. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.27 | ColumnoptixCesPWOutRbit | read-create | current | Thisobject indicates the threshold forexiting the R bit insertion status. Valid values: 1-65535. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.28 | ColumnoptixCesPWCheckRet | read-only | current | This object indicates the PW check result. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.29 | ColumnoptixCesPWSrvType | read-only | current | This object indicates the type of the service carried by the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.30 | ColumnoptixCesPWSrvIndex | read-only | current | This object indicates the index to the service carried by the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.31 | ColumnoptixCesPWSrvID | read-only | current | This object indicates the ID of the service carried by the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.32 | ColumnoptixCesPWLocalState | read-only | current | This object indicates the local state of the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.33 | ColumnoptixCesPWRemoteState | read-only | current | This object indicates the remote state of the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.34 | ColumnoptixCesPWState | read-only | current | This object indicates the PW state. |
| 1.3.6.1.2.1.10.4.50.6.1.4.1.255 | ColumnoptixCesPWRowStatus | read-create | current | This object indicates the row status. 1: active 4: createAndGo 6: destroy |
| 1.3.6.1.2.1.10.4.50.6.1.5 | TableoptixPWCrossTable | not-accessible | current | This table is used to query the actual PW cross-connect and forwarding paths. One PW has two cross-connections, forward and backward. |
| 1.3.6.1.2.1.10.4.50.6.1.5.1 | RowoptixPWCrossEntry | not-accessible | current | This entry is used to query the parameter table for actual PW cross-connections. |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.1 | ColumnoptixPWIndex | not-accessible | current | This object indicates the PW index, ranging from 1 to 0x00ffffff. |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.2 | ColumnoptixPWCrossdirection | not-accessible | current | This object indicates the cross-connect direction. 1: forward 2: backward |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.4 | ColumnoptixPWCrossType | read-only | current | This object indcates the PW type. 0x0003: atm-trans 0x0004: eth-tag 0x0005: eth-raw 0x0009: atm-nto1-vcc 0x000A: atm-nto1-vpc 0x000C: atm-1to1-vcc 0x000D: atm-… |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.5 | ColumnoptixPWCrossPWId | read-only | current | This object indicates the PW ID. |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.6 | ColumnoptixPWCrossPWGroupId | read-only | current | This object indicates the group ID. |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.7 | ColumnoptixPWCrossPeerIp | read-only | current | This object indicates the peer IP address. |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.8 | ColumnoptixPWCrossSingalType | read-only | current | This object indicates the signaling type. 1: static; 2: dynamic LDP |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.9 | ColumnoptixPWCrossPosition | read-only | current | This object indicates the node location. 0: null, 1: ingress, 2: egress |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.10 | ColumnoptixPWCrossCtrlWord | read-only | current | This object indicates the control word type. 1: notuse, 2: fstuse, 3: mstuse |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.11 | ColumnoptixPWCrossVccvctrlChnlType | read-only | current | This object indicates the VCCV control channel type. 0: none, 1: cw, 2: alertlabel, 3: ttl |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.12 | ColumnoptixPWCrossVccvCheckType | read-only | current | This object indicates the VCCV verification mode. 0: none, 1: ping, 2: bfd |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.13 | ColumnoptixPWCrossInLabel | read-only | current | This object indicates the ingress label. The forward cross-connection value is 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.14 | ColumnoptixPWCrossOutLabel | read-only | current | This object indicates the ingress label. The backward cross-connection value is 0xffffffff. |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.15 | ColumnoptixPWCrossTunnelIngressId | read-only | current | This object indicates the ingress tunnel ID to which the PW belongs. |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.16 | ColumnoptixPWCrossTunnelEgressId | read-only | current | This object indicates the egress tunnel ID to which the PW belongs. |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.17 | ColumnoptixPWCrossTunnelId | read-only | current | This object indicates the tunnel ID to which the PW belongs. |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.18 | ColumnoptixPWCrossTunnelType | read-only | current | This object indicates the type of the tunnel to which the PW belongs. 0: mpls 1: pbt 2: ip 3: gre |
| 1.3.6.1.2.1.10.4.50.6.1.5.1.19 | ColumnoptixPWCrossActiveStaus | read-only | current | This object indicates the activation status of the PW cross-connection. 0: deactive 1: active |
| 1.3.6.1.2.1.10.4.50.6.1.6 | TableoptixDynLdpPWTable | not-accessible | current | This table implements the configurations of a dynamic PW. |
| 1.3.6.1.2.1.10.4.50.6.1.6.1 | RowoptixDynLdpPWEntry | not-accessible | current | This node describes an entity of the dynamic PW parameter table. |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.1 | ColumnoptixDynLdpPWIndex | not-accessible | current | This object describes the index of a dynamic PW. |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.2 | ColumnoptixDynLdpPWtype | read-create | current | This object describes the type of a dynamic PW. |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.3 | ColumnoptixDynLdpPWId | read-create | current | This object describes the ID of a dynamic PW. |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.4 | ColumnoptixDynLdpPWDirection | read-create | current | This object describes the direction of a dynamic PW. |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.5 | ColumnoptixDynLdpPWPosition | read-create | current | This object describes the node location of a dynamic PW. 0: null 1: ingress 2: egress |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.6 | ColumnoptixDynLdpPWInLabel | read-only | current | This object describes the ingress label of a dynamic PW. |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.7 | ColumnoptixDynLdpPWOutLabel | read-only | current | This object describes the egress label of a dynamic PW. |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.8 | ColumnoptixDynLdpPWPeerIp | read-create | current | This object describes the peer IP address of a dynamic PW. |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.9 | ColumnoptixDynLdpPWTunnelIndex | read-create | current | This object describes the index to the tunnel carried over the PW. |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.10 | ColumnoptixDynLdpPWCWEn | read-only | current | This object describes whether to enable the control word of the VCCV. |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.11 | ColumnoptixDynLdpPWCCType | read-only | current | This object describes the control channel type of the VCCV. |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.12 | ColumnoptixDynLdpPWCVType | read-only | current | This object describes the check mode of the VCCV. |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.13 | ColumnoptixDynLdpPWATMCellNum | read-only | current | This object describes the actual number of cascaded ATM cells of a dynamic PW. |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.14 | ColumnoptixDynLdpPWCESRTP | read-only | current | This object describes whether the RTP header encapsulation is enabled on a dynamic PW. |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.15 | ColumnoptixDynLdpPWErrCode | read-only | current | This object describes the error code of a dynamic pw. 57385:MTU negotiation failure between local end and remote end, 57386:Control word mode negotiation failu… |
| 1.3.6.1.2.1.10.4.50.6.1.6.1.255 | ColumnoptixDynLdpPWRowStatus | read-create | current | This object describes the row status. 1: active 4: createAndGo 6: destroy. |
| 1.3.6.1.2.1.10.4.50.6.1.7 | TableoptixDynPWBFDTable | not-accessible | current | This table implements the configurations of a BFD session for dynamic PWs. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1 | RowoptixDynPWBFDEntry | not-accessible | current | This entry describes an entity of the BFD session parameter table. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1.1 | ColumnoptixDynPWBFDSessionName | read-create | current | This object describes the name of a BFD session. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1.2 | ColumnoptixDynPWBFDLocalMark | read-create | current | This object describes the local label of a BFD session. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1.3 | ColumnoptixDynPWBFDRemoteMark | read-create | current | This object describes the remote label of a BFD session. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1.4 | ColumnoptixDynPWBFDPeerIP | read-create | current | This object describes the sink IP address of a BFD session. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1.5 | ColumnoptixDynPWBFDAutoCalc | read-create | current | This object describes whether the auto calculation of the number of PW hops is enabled. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1.6 | ColumnoptixDynPWBFDTTL | read-create | current | This object describes the number of PW hops detected in a BFD session. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1.7 | ColumnoptixDynPWBFDSessionType | read-only | current | This object describes the type of a BFD session. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1.8 | ColumnoptixDynPWBFDMinRxInterval | read-create | current | This object describes the minimum interval expected by the NE to receive BFD packets. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1.9 | ColumnoptixDynPWBFDMinTxInterval | read-create | current | This object describes the minimum interval expected by the NE to transmit BFD packets. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1.10 | ColumnoptixDynPWBFDMultiplier | read-create | current | This object describes the local detection multiplier for the BFD session. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1.11 | ColumnoptixDynPWBFDTosExp | read-create | current | This object describes the priority of a BFD packet. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1.12 | ColumnoptixDynPWBFDWtr | read-create | current | This object describes the wait-to-recovery time for the BFD session. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1.13 | ColumnoptixDynPWBFDShutdown | read-create | current | This object describes the BFD session testing status. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1.14 | ColumnoptixDynPWBFDState | read-only | current | This object describes the status of a BFD session. |
| 1.3.6.1.2.1.10.4.50.6.1.7.1.255 | ColumnoptixDynPWBFDRowStatus | read-create | current | This object describes the row status. 1: active 4: createAndGo 6: destroy |
| 1.3.6.1.2.1.10.4.50.6.1.8 | TableoptixDynPWREDDYTable | not-accessible | current | This table implements the configurations of a redundancy group for dynamic PWs. |
| 1.3.6.1.2.1.10.4.50.6.1.8.1 | RowoptixDynPWREDDYEntry | not-accessible | current | This entry describes the parameter table of a redundancy group. |
| 1.3.6.1.2.1.10.4.50.6.1.8.1.1 | ColumnoptixDynPWREDDYIndex | not-accessible | current | This object describes the index of a PW redundancy group. |
| 1.3.6.1.2.1.10.4.50.6.1.8.1.2 | ColumnoptixDynPWREDDYProtectType | read-create | current | This object describes the protection type of a PW redundancy group. |
| 1.3.6.1.2.1.10.4.50.6.1.8.1.3 | ColumnoptixDynPWREDDYMem1PW | read-create | current | This object describes the PW1, a member of the PW redundancy group. |
| 1.3.6.1.2.1.10.4.50.6.1.8.1.4 | ColumnoptixDynPWREDDYPW1State | read-only | current | This node describes the forwarding status of PW1, a member of the PW redundancy group. |
| 1.3.6.1.2.1.10.4.50.6.1.8.1.5 | ColumnoptixDynPWREDDYMem2PW | read-create | current | This object describes PW2, another member of the PW redundancy group. |
| 1.3.6.1.2.1.10.4.50.6.1.8.1.6 | ColumnoptixDynPWREDDYPW2State | read-only | current | This node describes the forwarding status of PW2, another member of the PW redundancy protection group. |
| 1.3.6.1.2.1.10.4.50.6.1.8.1.7 | ColumnoptixDynPWREDDYMode | read-create | current | This object describes the mode of a PW redundancy group. |
| 1.3.6.1.2.1.10.4.50.6.1.8.1.8 | ColumnoptixDynPWREDDYDualRecv | read-create | current | This object describes the dual receiving mode of a PW redundancy group. |
| 1.3.6.1.2.1.10.4.50.6.1.8.1.9 | ColumnoptixDynPWREDDYReroute | read-create | current | This object describes the PW switchback policy mode. |
| 1.3.6.1.2.1.10.4.50.6.1.8.1.10 | ColumnoptixDynPWREDDYDelayTime | read-create | current | This object describes switchback delay time of a PW redundancy group. |
| 1.3.6.1.2.1.10.4.50.6.1.8.1.255 | ColumnoptixDynPWREDDYRowStatus | read-create | current | This object describes the row status. 1: active 4: createAndGo 6: destroy |
| 1.3.6.1.2.1.10.4.50.6.2 | NodeoptixMsPWObject | |||
| 1.3.6.1.2.1.10.4.50.6.2.1 | TableoptixMsPWTable | not-accessible | current | This table implements the configurations of MS-PWs, including the last/next segment PW index, name, MTU, types of services carried on the PW. |
| 1.3.6.1.2.1.10.4.50.6.2.1.1 | RowoptixMsPWEntry | not-accessible | current | This entry indicates the MS PW parameter table. |
| 1.3.6.1.2.1.10.4.50.6.2.1.1.1 | ColumnoptixMsPWIndex | not-accessible | current | This object indicates the MS-PW index. |
| 1.3.6.1.2.1.10.4.50.6.2.1.1.2 | ColumnoptixMsPWid | read-create | current | This object indicates the MS-PW ID. |
| 1.3.6.1.2.1.10.4.50.6.2.1.1.3 | ColumnoptixMsPWForePwIndex | read-create | current | This object indicates the last segment PW index. |
| 1.3.6.1.2.1.10.4.50.6.2.1.1.4 | ColumnoptixMsPWBackPwIndex | read-create | current | This object indicates thenext segment PW index. |
| 1.3.6.1.2.1.10.4.50.6.2.1.1.5 | ColumnoptixMsPWMtu | read-create | current | This object indicates the MTU. If the last and next segment PWs are of ETH service type, the value ranges from 46-9000. Default value: 1500. If the last and ne… |
| 1.3.6.1.2.1.10.4.50.6.2.1.1.6 | ColumnoptixMsPWName | read-create | current | This object indicates the MS-PW name, which is a character string, supporting a maximum of 64 bytes. No default value is configured. The name could be null, sp… |
| 1.3.6.1.2.1.10.4.50.6.2.1.1.7 | ColumnoptixMsPWServiceType | read-create | current | This object indicates the service type. 1: ces 2: atm 3: eth 4: ptp 5: top 6: ip 7: soh-cep 8: nosoh-cep |
| 1.3.6.1.2.1.10.4.50.6.2.1.1.8 | ColumnoptixMsPWForePwLocalState | read-only | current | This object indicates the local state of fore pw. |
| 1.3.6.1.2.1.10.4.50.6.2.1.1.9 | ColumnoptixMsPWForePwRemoteState | read-only | current | This object indicates the remote state of fore pw. |
| 1.3.6.1.2.1.10.4.50.6.2.1.1.10 | ColumnoptixMsPWForePwState | read-only | current | This object indicates the state of fore PW. |
| 1.3.6.1.2.1.10.4.50.6.2.1.1.11 | ColumnoptixMsPWBackPwLocalState | read-only | current | This object indicates the local state of back PW |
| 1.3.6.1.2.1.10.4.50.6.2.1.1.12 | ColumnoptixMsPWBackPwRemoteState | read-only | current | This object indicates the remote state of back pw. |
| 1.3.6.1.2.1.10.4.50.6.2.1.1.13 | ColumnoptixMsPWBackPwState | read-only | current | This object indicates the state of back pw. |
| 1.3.6.1.2.1.10.4.50.6.2.1.1.255 | ColumnoptixMsPWRowStatus | read-create | current | This object indicates the row status. 1: active 4: createAndGo 6: destroy |
| 1.3.6.1.2.1.10.4.50.6.2.2 | TableoptixMsPWCrossTable | not-accessible | current | This table is used to query the actual MS-PW cross-connect and forwarding paths and the cross-connection information of the last and next segment PWs are retur… |
| 1.3.6.1.2.1.10.4.50.6.2.2.1 | RowoptixMsPWCrossEntry | not-accessible | current | This entry is used to query the parameter table for actual MS-PW cross-connections. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.1 | ColumnoptixMsPWCrossIndex | not-accessible | current | This object indicates the MS-PW index, ranging from 1 to 0x00ffffff. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.2 | ColumnoptixMsPWCrossForePWXCId | read-only | current | This object indicates the ID of the cross-connection between the last segment and the next segment PWs. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.3 | ColumnoptixMsPWCrossForePWType | read-only | current | This object indicates the last segment PW type. 4: ethtag, 5: ethraw, 3: atmtrans, 9: atmnto1vcc, 10: atmnto1vpc, 12: atm1to1vcc, 13: atm1to1vpc, 17: satop, 21… |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.4 | ColumnoptixMsPWCrossForePWId | read-only | current | This object indicates the last segment PW ID. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.5 | ColumnoptixMsPWCrossForePWInlabel | read-only | current | This object indicates the ingress label of the last segment PW. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.6 | ColumnoptixMsPWCrossBackPWOutlabel | read-only | current | This object indicates the egress label of the last segment PW. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.7 | ColumnoptixMsPWCrossBackPWTnlIngressId | read-only | current | This object indicates the ingress tunnel ID of the last segment PW. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.8 | ColumnoptixMsPWCrossBackPWTnlEgressId | read-only | current | This object indicates the egress tunnel ID of the last segment PW. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.9 | ColumnoptixMsPWCrossBackPWTnlId | read-only | current | This object indicates the tunnel ID of the last segment PW. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.10 | ColumnoptixMsPWCrossBackPWTunnelType | read-only | current | This object indicates the tunnel type of the last segment PW. 0: mpls, 1: pbt, 2: ip, 3: gre |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.11 | ColumnoptixMsPWCrossForePWActiveStaus | read-only | current | This object indicates the activation status of the cross-connection between the last segment and the next segment PWs. 0: noactive, 1: active |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.12 | ColumnoptixMsPWCrossBackPWXCId | read-only | current | This object indicates the ID of the cross-connection between the next segment and thelast segment PWs. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.13 | ColumnoptixMsPWCrossBackPWType | read-only | current | This object indicates thenext segment PW type. 4: ethtag, 5: ethraw, 3: atmtrans, 9: atmnto1vcc, 10: atmnto1vpc, 12: atm1to1vcc, 13: atm1to1vpc, 17: satop, 21:… |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.14 | ColumnoptixMsPWCrossBackPWId | read-only | current | This object indicates the next segment PW ID. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.15 | ColumnoptixMsPWCrossBackPWInlabel | read-only | current | This object indicates the ingress label of thenext segment PW. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.16 | ColumnoptixMsPWCrossForePWOutlabel | read-only | current | This object indicates the egress label of the last segment PW. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.17 | ColumnoptixMsPWCrossForePWTnlIngressId | read-only | current | This object indicates the ingress tunnel ID of the last segment PW. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.18 | ColumnoptixMsPWCrossForePWTnlEgressId | read-only | current | This object indicates the egress tunnel ID of the last segment PW. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.19 | ColumnoptixMsPWCrossForePWTnlId | read-only | current | This object indicates the tunnel ID of the last segment PW. |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.20 | ColumnoptixMsPWCrossForePWTunnelType | read-only | current | This object indicates the tunnel type of the last segment PW. 0: mpls, 1: pbt, 2: ip, 3: gre |
| 1.3.6.1.2.1.10.4.50.6.2.2.1.21 | ColumnoptixMsPWCrossBackPWActiveStaus | read-only | current | This object indicates the activation status of the cross-connection between thenext segment and the last segment PWs. 0: noactive, 1: active |
| 1.3.6.1.2.1.10.4.50.6.5 | NodeoptixPWTrapGroup | |||
| 1.3.6.1.2.1.10.4.50.6.5.1 | NodeoptixPWTrapMember | |||
| 1.3.6.1.2.1.10.4.50.6.5.1.1 | ScalaroptixPWTrapPWPingIndex | accessible-for-notify | current | This object indicates the index to the PW initiating PW ping. |
| 1.3.6.1.2.1.10.4.50.6.5.1.2 | ScalaroptixPWTrapRspLSRIP | accessible-for-notify | current | This object indicates the IP address of the response LSR. |
| 1.3.6.1.2.1.10.4.50.6.5.1.3 | ScalaroptixPWTrapPKTLen | accessible-for-notify | current | This object indicates the number of bytes in the sent packet. |
| 1.3.6.1.2.1.10.4.50.6.5.1.4 | ScalaroptixPWTrapSEQNumber | accessible-for-notify | current | This object indicates the sequence number of the response packet. |
| 1.3.6.1.2.1.10.4.50.6.5.1.5 | ScalaroptixPWTrapDelay | accessible-for-notify | current | This object indicates the delay. (unit: us) |
| 1.3.6.1.2.1.10.4.50.6.5.1.6 | ScalaroptixPWTrapTTL | accessible-for-notify | current | This object indicates the TTL of the sent packet. |
| 1.3.6.1.2.1.10.4.50.6.5.1.7 | ScalaroptixPWTrapRetCode | accessible-for-notify | current | This object indicates the return code. (0: No return code; 1: An error request is received; 2: Unknown TLVs are received; 3: An egress for an LSP is available;… |
| 1.3.6.1.2.1.10.4.50.6.5.1.8 | ScalaroptixPWTrapSubCode | accessible-for-notify | current | This object indicates the return subcode. |
| 1.3.6.1.2.1.10.4.50.6.5.1.9 | ScalaroptixPWTrapListId | accessible-for-notify | current | This object indicates the sequence number. |
| 1.3.6.1.2.1.10.4.50.6.5.1.10 | ScalaroptixPWTrapTXNumber | accessible-for-notify | current | This object indicates the number of sent packets. |
| 1.3.6.1.2.1.10.4.50.6.5.1.11 | ScalaroptixPWTrapRXNumber | accessible-for-notify | current | This object indicates the number of received packets. |
| 1.3.6.1.2.1.10.4.50.6.5.1.12 | ScalaroptixPWTrapLoseRate | accessible-for-notify | current | This object indicates the packet loss rate. |
| 1.3.6.1.2.1.10.4.50.6.5.1.13 | ScalaroptixPWTrapMinDelay | accessible-for-notify | current | This object indicates the minimum delay. (unit: us) |
| 1.3.6.1.2.1.10.4.50.6.5.1.14 | ScalaroptixPWTrapMaxDelay | accessible-for-notify | current | This object indicates the maximum delay. (unit: us) |
| 1.3.6.1.2.1.10.4.50.6.5.1.15 | ScalaroptixPWTrapAverDelay | accessible-for-notify | current | This object indicates the average delay. (unit: us) |
| 1.3.6.1.2.1.10.4.50.6.5.1.16 | ScalaroptixPWTrapTraceRoutePWIndex | accessible-for-notify | current | This object indicates the index to the PW initiating TraceRoute. |
| 1.3.6.1.2.1.10.4.50.6.5.1.17 | ScalaroptixPWTrapReplierIP | accessible-for-notify | current | This object indicates the IP address of the response node. |
| 1.3.6.1.2.1.10.4.50.6.5.1.18 | ScalaroptixPWTrapMPLSTraceType | accessible-for-notify | current | This object indicates the type of response node. |
| 1.3.6.1.2.1.10.4.50.6.5.1.19 | ScalaroptixPWTrapDownStreamIP | accessible-for-notify | current | This object indicates the IP address of the downstream node. |
| 1.3.6.1.2.1.10.4.50.6.5.1.20 | ScalaroptixPWTrapDownStreamLabel | accessible-for-notify | current | This object indicates the label of the downstream node. |
| 1.3.6.1.2.1.10.4.50.6.5.1.21 | ScalaroptixPWTrapSourceIP | accessible-for-notify | current | This object indicates the source IP address. |
| 1.3.6.1.2.1.10.4.50.6.5.1.22 | ScalaroptixTrapDynLdpPWIndex | accessible-for-notify | current | This object describes the index of a dynamic PW. |
| 1.3.6.1.2.1.10.4.50.6.5.1.23 | ScalaroptixTrapDynLdpPWLocalState | accessible-for-notify | current | This object describes the local state of a dynamic PW. |
| 1.3.6.1.2.1.10.4.50.6.5.1.24 | ScalaroptixTrapDynLdpPWRemoteState | accessible-for-notify | current | This object describes the remote state of a dynamic PW. |
| 1.3.6.1.2.1.10.4.50.6.5.1.25 | ScalaroptixTrapDynLdpPWState | accessible-for-notify | current | This object describes the state of a dynamic PW. |
| 1.3.6.1.2.1.10.4.50.6.5.1.26 | ScalaroptixTrapDynPWRdyIndex | accessible-for-notify | current | This object describes the index of a PW redundancy group. |
| 1.3.6.1.2.1.10.4.50.6.5.1.27 | ScalaroptixTrapDynPWRdyPW1Id | accessible-for-notify | current | This object describes PW1, a member of the PW redundant group. |
| 1.3.6.1.2.1.10.4.50.6.5.1.28 | ScalaroptixTrapDynPWRdyPW1Fwd | accessible-for-notify | current | This node describes the forwarding status of PW1, a member of the PW redundancy group. |
| 1.3.6.1.2.1.10.4.50.6.5.1.29 | ScalaroptixTrapDynPWRdyPW2Id | accessible-for-notify | current | This object describes the PW2, another member of the PW redundancy group. |
| 1.3.6.1.2.1.10.4.50.6.5.1.30 | ScalaroptixTrapDynPWRdyPW2Fwd | accessible-for-notify | current | This node describes the forwarding status of PW2, another member of the PW redundancy group. |
| 1.3.6.1.2.1.10.4.50.6.5.1.31 | ScalaroptixPWTrapSaltusNum | accessible-for-notify | current | This object indicates the number of payload bit changes. |
| 1.3.6.1.2.1.10.4.50.6.5.1.32 | ScalaroptixPWTrapSaltusBit | accessible-for-notify | current | This object indicates the payload change bit. |
| 1.3.6.1.2.1.10.4.50.6.5.1.33 | ScalaroptixPWTrapChangeNum | accessible-for-notify | current | This object indicates the total number of payload change packets. |
| 1.3.6.1.2.1.10.4.50.6.5.1.34 | ScalaroptixPWTrapPWPingType | accessible-for-notify | current | This object indicates the ping type. |
| 1.3.6.1.2.1.10.4.50.6.5.2 | NodeoptixPWTrap | |||
| 1.3.6.1.2.1.10.4.50.6.5.2.1 | NotificationoptixPWPingRSPTrap | current | This object is used to report the PW ping response event. | |
| 1.3.6.1.2.1.10.4.50.6.5.2.2 | NotificationoptixPWPingOverTimeTrap | current | This objectis used to report the PW ping response timeout event. | |
| 1.3.6.1.2.1.10.4.50.6.5.2.3 | NotificationoptixPWPingStatisticTrap | current | This object is used to report the PW ping statistics result event. | |
| 1.3.6.1.2.1.10.4.50.6.5.2.4 | NotificationoptixPWTraceRouteResponseTrap | current | This object is used to report the PW traceroute response event. | |
| 1.3.6.1.2.1.10.4.50.6.5.2.5 | NotificationoptixPWTraceRouteEndTrap | current | This object is used to report the PW traceroute end event. | |
| 1.3.6.1.2.1.10.4.50.6.5.2.6 | NotificationoptixPWTraceRouteOverTimeTrap | current | This object is used to report the PW traceroute response timeout event. | |
| 1.3.6.1.2.1.10.4.50.6.5.2.7 | NotificationoptixPWNoReplyPingRSPTrap | current | This object is used to report the PW ping event in no-reply mode. | |
| 1.3.6.1.2.1.10.4.50.6.5.2.8 | NotificationoptixPWNoReplyTrcrtRSPTrap | current | This object is used to report the PW TRACEROUTE event in no-reply mode. | |
| 1.3.6.1.2.1.10.4.50.6.5.2.9 | NotificationoptixDynLdpPWStateTrap | current | This object is used to report the PW TRACEROUTE event in no-reply mode. | |
| 1.3.6.1.2.1.10.4.50.6.5.2.10 | NotificationoptixDynPWREDDYSWTrap | current | This object is used to report the PW TRACEROUTE event in no-reply mode. |