OPTIX-PW-OAM-MIB
21 objects
This module is used to configure and manage the MPLS PW OAM. The PW OAM provides complete fault detection and identification mechanism and network performance monitoringat the PW layer. Based on the OAM check result, the equipment determines whether to trigger protection switching. The PW OAM enables quick faultdetection and identificationand service protection.
Imported Objects
| OPTIX-OID-MIB | optixProvisionPtn |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.50.7 | IdentityoptixPWOamMod | This module is used to configure and manage the MPLS PW OAM. The PW OAM provides complete fault detection and identification mechanism and network performance … | ||
| 1.3.6.1.2.1.10.4.50.7.1 | NodeoptixPWOamObject | |||
| 1.3.6.1.2.1.10.4.50.7.1.1 | TableoptixPWOamTable | not-accessible | current | Thistable is used to configure PW OAM attributes, including the PW OAM enable status, detection mode, CC detection mode, and SD/SF thresholds. |
| 1.3.6.1.2.1.10.4.50.7.1.1.1 | RowoptixPWOamEntry | not-accessible | current | Thisentry is used to manage PW OAM attributes. |
| 1.3.6.1.2.1.10.4.50.7.1.1.1.1 | ColumnoptixPWOamIndex | not-accessible | current | This object indicates the PW OAM index, ranging from 1 to 0x00ffffff. |
| 1.3.6.1.2.1.10.4.50.7.1.1.1.2 | ColumnoptixPWOamEnable | read-write | current | This object indicates whether the OAM is enabled. 1: enable 0: disable |
| 1.3.6.1.2.1.10.4.50.7.1.1.1.3 | ColumnoptixPWOamCheckWay | read-write | current | This object indicates the OAM detection mode. 1: auto 2: manual |
| 1.3.6.1.2.1.10.4.50.7.1.1.1.4 | ColumnoptixPWOamCcType | read-write | current | This object indicates the CC detection packet type. 1: cv (default value) 2: ffd |
| 1.3.6.1.2.1.10.4.50.7.1.1.1.5 | ColumnoptixPWOamCcTime | read-write | current | This object indicates the CC detection packet frequency. When the packet type is cv, the frequency is an invalid value, 0xff. When the packet type is ffd, the … |
| 1.3.6.1.2.1.10.4.50.7.1.1.1.6 | ColumnoptixPWOamSf | read-write | current | This object indicates the SF threshold (packet loss rate). Valid values range from 0 to 100. |
| 1.3.6.1.2.1.10.4.50.7.1.1.1.7 | ColumnoptixPWOamSd | read-write | current | This object indicates the SD threshold (packet loss rate). Valid values range from 0 to 100. |
| 1.3.6.1.2.1.10.4.50.7.1.1.1.8 | ColumnoptixPWOamPeerLsrId | read-write | current | This object indicates the LSR ID to receive, which is the LSR ID of the valid MPLS device. 0.0.0.0: indicates that the peer IP address of the local PW is autom… |
| 1.3.6.1.2.1.10.4.50.7.1.1.1.9 | ColumnoptixPWOamPeerPwId | read-write | current | This object indicates the remote PW ID, which is a valid MPLS PW ID. 0: indicates that the ID of the local PW is automatically obtained. |
| 1.3.6.1.2.1.10.4.50.7.1.1.1.10 | ColumnoptixPWOamStandard | read-write | current | This object indicates the OAM protocol standard  1: 1711 2: 1731 |
| 1.3.6.1.2.1.10.4.50.7.1.2 | TableoptixPWOamStateTable | not-accessible | current | Thistable is used to query the PW OAM status. |
| 1.3.6.1.2.1.10.4.50.7.1.2.1 | RowoptixPWOamStateEntry | not-accessible | current | Thisentry is used to manage the PW OAM status. |
| 1.3.6.1.2.1.10.4.50.7.1.2.1.1 | ColumnoptixPWOamDirection | not-accessible | current | For bidirectional MPLS PWs, the status query is performed in two directions, local and remote ends. This object indicates the direction of the PW OAM. The stat… |
| 1.3.6.1.2.1.10.4.50.7.1.2.1.2 | ColumnoptixPWOamState | read-only | current | This object indicates the PW OAM status. 0: initialstate, 1: nearendavailable, 2: nearenddefectavailable, 3: nearenddefectunavailable, 4: nearendunavailable, 5… |
| 1.3.6.1.2.1.10.4.50.7.1.2.1.3 | ColumnoptixPWOamDefectType | read-only | current | This object indicates the defect type of the PW OAM. 1: dserver, 2: dpeerme, 3: dlocv, 4: dttsimismatch, 5: dttsimismerge, 6: dexcess, 7: dunknown, 255: invalid |
| 1.3.6.1.2.1.10.4.50.7.1.2.1.4 | ColumnoptixPWOamUnavailableTime | read-only | current | This object indicates the unavailable time of the PW OAM. The time ranges from 0 to 300,000 ms. 4294967295: invalid |
| 1.3.6.1.2.1.10.4.50.7.1.2.1.5 | ColumnoptixPWOamDefectPosition | read-only | current | This object indicates the position of the PW OAM defect: a node identified by IP address. |