MIB Viewer

OPTIX-RTN-ODU-MGR-MIB

328 objects
This module is used to configure and query RF unit parameters for a radio link, including the RF unit frequency, power, and working status.
Imported Objects
OPTIX-OID-MIBoptixProvisionRtn
OPTIX-RTN-GENNERAL-MIBoptixRtnIFPortlist
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIInteger32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCTEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.4.40.4IdentityoptixRtnOduMgrThis module is used to configure and query RF unit parameters for a radio link, including the RF unit frequency, power, and working status.
1.3.6.1.2.1.10.4.40.4.10NodeoptixODU
1.3.6.1.2.1.10.4.40.4.10.10TableoptixRtnOduIndexTablenot-accessiblecurrentServes as the public index table for attribute tables related to an RF unit.
1.3.6.1.2.1.10.4.40.4.10.10.1RowoptixRtnOduIndexEntrynot-accessiblecurrentIndicates the index entry for an RF unit.
1.3.6.1.2.1.10.4.40.4.10.10.1.1ColumnoptixRtnOduIndex1not-accessiblecurrentIndicates the RF unit board ID.
1.3.6.1.2.1.10.4.40.4.10.10.1.2ColumnoptixRtnOduIndex2read-onlycurrentIndicates the subboard ID.
1.3.6.1.2.1.10.4.40.4.10.10.1.3ColumnoptixRtnOduIndex3read-onlycurrentIndicates the Port ID.
1.3.6.1.2.1.10.4.40.4.10.10.1.4ColumnoptixRtnOduIndex4not-accessiblecurrentIndicates the freqency point.
1.3.6.1.2.1.10.4.40.4.10.13TableoptixRtnOduFactoryInfoTablenot-accessiblecurrentQuery ODU manufacturers information.
1.3.6.1.2.1.10.4.40.4.10.13.1RowoptixRtnOduFactoryInfoEntrynot-accessiblecurrentQuery ODU manufacturers information.
1.3.6.1.2.1.10.4.40.4.10.13.1.1ColumnoptixRtnOduFactoryInforead-onlycurrentIndicates the information of ODU manufacturers.
1.3.6.1.2.1.10.4.40.4.10.16TableoptixRtnOduPowerSwitchTablenot-accessiblecurrentDescribes the RF unit transmit and receive frequencies.
1.3.6.1.2.1.10.4.40.4.10.16.1RowoptixRtnOduPowerSwitchEntrynot-accessiblecurrentIndicates the parameter entry for power switch.
1.3.6.1.2.1.10.4.40.4.10.16.1.1ColumnoptixOduPowerSwitchread-writecurrentIndicates the transmit power switch
1.3.6.1.2.1.10.4.40.4.10.17TableoptixRtnOduGeneralAttrExtTablenot-accessiblecurrentIndicates the table of general attributes of an ODU.
1.3.6.1.2.1.10.4.40.4.10.17.1RowoptixRtnOduGeneralAttrExtEntrynot-accessiblecurrentIndicates an entry of general attributes of an ODU.
1.3.6.1.2.1.10.4.40.4.10.17.1.1ColumnoptixRtnOduFademarginAlmThExtread-writecurrentIndicates the alarming threshold in the unit of 0.1 dB.
1.3.6.1.2.1.10.4.40.4.10.17.1.2ColumnoptixRtnOduCurrentFilterExtread-writecurrentIndicates the filter, expressed in KHz.
1.3.6.1.2.1.10.4.40.4.10.17.1.3ColumnoptixRtnOduAllFilterListInfoExtread-onlycurrentIndicates the supported filter list. Every 4 bytes represent a filter, expressed in KHz.
1.3.6.1.2.1.10.4.40.4.10.17.1.4ColumnoptixRtnOduLoopModeExtread-writecurrentIndicates the loop mode(360 or 380 or 380H or 380hn or 380a or 380ax not support this node): 0:no loop 1:in loop 3:masterinloop 4:slaveinloop
1.3.6.1.2.1.10.4.40.4.10.18TableoptixRtnOduPortGeneralAttrTablenot-accessiblecurrentIndicates the table of general attributes of an ODU(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.18.1RowoptixRtnOduPortGeneralAttrEntrynot-accessiblecurrentIndicates an entry of general attributes of an ODU(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.18.1.1ColumnoptixRtnOduPortFademarginAlmThread-writecurrentIndicates the alarming threshold in the unit of 0.1 dB(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.18.1.2ColumnoptixRtnOduPortCurrentFilterread-writecurrentIndicates the filter, expressed in KHz(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.18.1.3ColumnoptixRtnOduPortAllFilterListInforead-onlycurrentIndicates the supported filter list. Every 4 bytes represent a filter, expressed in KHz(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.18.1.4ColumnoptixRtnOduPortLoopModeread-writecurrentIndicates the loop mode(this node used only to 320 or 3202f): 0:no loop 1:in loop 2:out loop
1.3.6.1.2.1.10.4.40.4.10.23TableoptixRtnOduAmTxpowerTablenot-accessiblecurrentDescribes parameters of the txpower range.
1.3.6.1.2.1.10.4.40.4.10.23.1RowoptixRtnOduAmTxpowerEntrynot-accessiblecurrentIndicates the parameter entry for the txpower range.
1.3.6.1.2.1.10.4.40.4.10.23.1.1ColumnoptixRtnOduAcmread-onlycurrentthis leaf sis AM modle.
1.3.6.1.2.1.10.4.40.4.10.24TableoptixRtnRegOduRslTablenot-accessiblecurrentDEscribes parameters of Min rsl.
1.3.6.1.2.1.10.4.40.4.10.24.1RowoptixRtnRegOduRslEntrynot-accessiblecurrentIndicates the parameter entry for the RF unit transmit and receive powers.
1.3.6.1.2.1.10.4.40.4.10.24.1.4ColumnoptixRtnOduIndexRsl4not-accessiblecurrentindex board id.
1.3.6.1.2.1.10.4.40.4.10.24.1.5ColumnoptixRtnOduRslread-onlycurrentDescribes parameters of the RF unit transmit and receive power.
1.3.6.1.2.1.10.4.40.4.10.27TableoptixRtnOduFrequencyExtTablenot-accessiblecurrentDescribes the RF unit transmit and receive frequencies.
1.3.6.1.2.1.10.4.40.4.10.27.1RowoptixRtnOduFrequencyExtEntrynot-accessiblecurrentIndicates the parameter entry for the RF unit transmit and receive frequencies.
1.3.6.1.2.1.10.4.40.4.10.27.1.1ColumnoptixRtnOduCfgTxFreqExtread-writecurrentIndicates the transmit frequency of an RF unit. When frequencies of the transmitter/receiver at both ends match, signals can be transmitted and received succes…
1.3.6.1.2.1.10.4.40.4.10.27.1.2ColumnoptixRtnOduCfgTRSpacingExtread-writecurrentIndicates the TR spacing of an RF unit board to avoid interference. Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.27.1.3ColumnoptixRtnOduActualTxFreqExtread-onlycurrentIndicates the actual transmit frequency of an RF unit. Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.27.1.4ColumnoptixRtnOduActualRxFreqExtread-onlycurrentIndicates the actual receive frequency of an RF unit. Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.27.1.5ColumnoptixRtnOduMinTxFreqExtread-onlycurrentIndicates the minimum range of an RF unit frequency point. Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.27.1.6ColumnoptixRtnOduMaxTxFreqExtread-onlycurrentIndicates the maximum range of an RF unit frequency point. Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.27.1.7ColumnoptixRtnOduRealRTRSpacingExtread-onlycurrentIndicates the real TR spacing of an RF unit. Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.27.1.8ColumnoptixRtnOduTRSpacingInfoExtread-onlycurrentIndicates the TR spacing of an RF unit(Use only 360/380/380H/380hn/380a/380ax). Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.28TableoptixRtnOduPortFrequencyTablenot-accessiblecurrentDescribes the RF unit transmit and receive frequencies(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.28.1RowoptixRtnOduPortFrequencyEntrynot-accessiblecurrentIndicates the parameter entry for the RF unit transmit and receive frequencies(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.28.1.1ColumnoptixRtnOduPortCfgTxFreqread-writecurrentIndicates the transmit frequency of an RF unit. When frequencies of the transmitter/receiver at both ends match, signals can be transmitted and received succes…
1.3.6.1.2.1.10.4.40.4.10.28.1.2ColumnoptixRtnOduPortCfgTRSpacingread-writecurrentIndicates the TR spacing of an RF unit board to avoid interference(this node used only to 320 or 3202f). Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.28.1.3ColumnoptixRtnOduPortActualTxFreqread-onlycurrentIndicates the actual transmit frequency of an RF unit(this node used only to 320 or 3202f). Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.28.1.4ColumnoptixRtnOduPortActualRxFreqread-onlycurrentIndicates the actual receive frequency of an RF unit(this node used only to 320 or 3202f). Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.28.1.5ColumnoptixRtnOduPortMinTxFreqread-onlycurrentIndicates the minimum range of an RF unit frequency point(this node used only to 320 or 3202f). Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.28.1.6ColumnoptixRtnOduPortMaxTxFreqread-onlycurrentIndicates the maximum range of an RF unit frequency point(this node used only to 320 or 3202f). Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.28.1.7ColumnoptixRtnOduPortRealRTRSpacingread-onlycurrentIndicates the real TR spacing of an RF unit(this node used only to 320 or 3202f). Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.31TableoptixRtnOduPowerExtTablenot-accessiblecurrentDescribes parameters of the RF unit transmit and receive power.
1.3.6.1.2.1.10.4.40.4.10.31.1RowoptixRtnOduPowerExtEntrynot-accessiblecurrentIndicates the parameter entry for the RF unit transmit and receive powers.
1.3.6.1.2.1.10.4.40.4.10.31.1.1ColumnoptixRtnOduCfgTxPowerExtread-writecurrentIndicates the transmit power of an RF port. Signed type Value range: -100 to +350 Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.31.1.2ColumnoptixRtnOduCfgToBeRxPowerExtread-writecurrentIndicates the power expected to receive by an RF port. Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.31.1.3ColumnoptixRtnOduTxPowerHighThExtread-writecurrentIndicates the upper threshold of the transmit power. Signed type The value range: -100 to +350 Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.31.1.4ColumnoptixRtnOduTxPowerLowTHExtread-writecurrentIndicates the lower threshold of the transmit power. Signed type The value range: -100 to +350 Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.31.1.5ColumnoptixRtnOduRxPowerHighThExtread-writecurrentIndicates the upper threshold of the receive power. Signed type Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.31.1.6ColumnoptixRtnOduRxPowerLowTHExtread-writecurrentIndicates the lower threshold of the receive power. Signed type Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.31.1.7ColumnoptixRtnOduCfgMaxTxpowerExtread-writecurrentIndicates the maximum transmit power of an RF unit board. When the ACM function is disabled, the maximum transmit power in the current mode is returned. When t…
1.3.6.1.2.1.10.4.40.4.10.31.1.8ColumnoptixRtnOduActualTxPowerExtread-onlycurrentIndicates the actual transmit power of an RF port. Signed type Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.31.1.9ColumnoptixRtnOduActualRxPowerExtread-onlycurrentIndicates the actual receive power of an RF port. Signed type Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.31.1.10ColumnoptixRtnOduMaxTxpowerExtread-onlycurrentIndicates the maximum value of the transmit power. Signed type Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.31.1.11ColumnoptixRtnOduMinTxpowerExtread-onlycurrentIndicates the minimum value of the transmit power. Signed type Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.32TableoptixRtnOduPortPowerTablenot-accessiblecurrentDescribes parameters of the RF unit transmit and receive power(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.32.1RowoptixRtnOduPortPowerEntrynot-accessiblecurrentIndicates the parameter entry for the RF unit transmit and receive powers(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.32.1.1ColumnoptixRtnOduPortCfgTxPowerread-writecurrentIndicates the transmit power of an RF port. Signed type Value range: -100 to +350 Unit: 0.1 dBm(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.32.1.2ColumnoptixRtnOduPortCfgToBeRxPowerread-writecurrentIndicates the power expected to receive by an RF port. Unit: 0.1 dBm(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.32.1.3ColumnoptixRtnOduPortTxPowerHighThread-writecurrentIndicates the upper threshold of the transmit power. Signed type The value range: -100 to +350 Unit: 0.1 dBm(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.32.1.4ColumnoptixRtnOduPortTxPowerLowTHread-writecurrentIndicates the lower threshold of the transmit power. Signed type The value range: -100 to +350 Unit: 0.1 dBm(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.32.1.5ColumnoptixRtnOduPortRxPowerHighThread-writecurrentIndicates the upper threshold of the receive power. Signed type Unit: 0.1 dBm(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.32.1.6ColumnoptixRtnOduPortRxPowerLowTHread-writecurrentIndicates the lower threshold of the receive power. Signed type Unit: 0.1 dBm(this node used only to 320 or 3202f)
1.3.6.1.2.1.10.4.40.4.10.32.1.7ColumnoptixRtnOduPortCfgMaxTxpowerread-writecurrentIndicates the maximum transmit power of an RF unit board. When the ACM function is disabled, the maximum transmit power in the current mode is returned. When t…
1.3.6.1.2.1.10.4.40.4.10.32.1.8ColumnoptixRtnOduPortActualTxPowerread-onlycurrentIndicates the actual transmit power of an RF port. Signed type Unit: 0.1 dBm(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.32.1.9ColumnoptixRtnOduPortActualRxPowerread-onlycurrentIndicates the actual receive power of an RF port. Signed type Unit: 0.1 dBm(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.32.1.10ColumnoptixRtnOduPortMaxTxpowerread-onlycurrentIndicates the maximum value of the actual transmit power. Signed type Unit: 0.1 dBm(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.32.1.11ColumnoptixRtnOduPortMinTxpowerread-onlycurrentIndicates the minimum value of the actual transmit power. Signed type Unit: 0.1 dBm(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.41TableoptixRtnOduWorkStateExtTablenot-accessiblecurrentIndicates the current emission status of an RF unit board.
1.3.6.1.2.1.10.4.40.4.10.41.1RowoptixRtnOduWorkStateExtEntrynot-accessiblecurrentIndicates the transmission status entry for an RF unit.
1.3.6.1.2.1.10.4.40.4.10.41.1.1ColumnoptixRtnOduConfigWorkStateExtread-writecurrentIndicates the transmission status of an RF transmitter. Values: 0: muted 1: unmuted
1.3.6.1.2.1.10.4.40.4.10.41.1.2ColumnoptixRtnOduActualWorkStateExtread-onlycurrentIndicates the transmission actual status of an RF transmitter. Values: 0: muted 1: unmuted
1.3.6.1.2.1.10.4.40.4.10.42TableoptixRtnOduPortWorkStateTablenot-accessiblecurrentIndicates the current emission status of an RF unit board(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.42.1RowoptixRtnOduPortWorkStateEntrynot-accessiblecurrentIndicates the transmission status entry for an RF unit(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.42.1.1ColumnoptixRtnOduPortConfigWorkStateread-writecurrentIndicates the transmission status of an RF transmitter(this node used only to 320 or 3202f). Values: 0: muted 1: unmuted
1.3.6.1.2.1.10.4.40.4.10.42.1.2ColumnoptixRtnOduPortActualWorkStateread-onlycurrentIndicates the transmission actual status of an RF transmitter(this node used only to 320 or 3202f). Values: 0: muted 1: unmuted
1.3.6.1.2.1.10.4.40.4.10.43TableoptixRtnRegOduLHFreqScanTablenot-accessiblecurrentDescribes the information about RF unit, frequency scanning , and obtaining of interfering frequency.
1.3.6.1.2.1.10.4.40.4.10.43.1RowoptixRtnRegOduLHFreqScanEntrynot-accessiblecurrentIndicates the parameter entry for RF unit frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.43.1.4ColumnoptixRtnOduLHScanFreqInterferenceread-onlycurrentIndicates the information of Interference.
1.3.6.1.2.1.10.4.40.4.10.43.1.5ColumnoptixRtnOduLHScanFreqLeakageread-onlycurrentIndicates the information of Leakage.
1.3.6.1.2.1.10.4.40.4.10.43.1.6ColumnoptixRtnOduLHScanFreqIntermodulationread-onlycurrentIndicates the information of Intermodulation.
1.3.6.1.2.1.10.4.40.4.10.43.1.7ColumnoptixRtnOduLHScanFreqStaFreqread-writecurrentIndicates the frequence of starting scanning .
1.3.6.1.2.1.10.4.40.4.10.43.1.8ColumnoptixRtnOduLHScanFreqEndFreqread-writecurrentIndicates the frequence of ending scanning.
1.3.6.1.2.1.10.4.40.4.10.43.1.9ColumnoptixRtnOduLHScanFreqStepread-writecurrentIndicates the step of scanning frequence.
1.3.6.1.2.1.10.4.40.4.10.43.1.10ColumnoptixRtnOduLHScanFreqBandWidthread-writecurrentIndicates the bandwidth of scanning frequence.
1.3.6.1.2.1.10.4.40.4.10.43.1.11ColumnoptixRtnOduLHScanFreqNumberread-writecurrentIndicates the number of scanning frequence.
1.3.6.1.2.1.10.4.40.4.10.43.1.12ColumnoptixRtnOduLHScanFreqBidsread-writecurrentIndicates the board IDs of scanning frequence. format:number,bid1,bid2,...,
1.3.6.1.2.1.10.4.40.4.10.44TableoptixRtnRegOduLHFreqScanResultTablenot-accessiblecurrentDescribes the information about RF unit, frequency scanning , and obtaining of interfering frequency.
1.3.6.1.2.1.10.4.40.4.10.44.1RowoptixRtnRegOduLHFreqScanResultEntrynot-accessiblecurrentIndicates the parameter entry for RF unit frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.44.1.5ColumnoptixRtnOduLHScanResultRxFreqread-onlycurrentIndicates the Rx frequency of frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.44.1.6ColumnoptixRtnOduLHScanResultMainRslread-onlycurrentIndicates the main Rsl of frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.44.1.7ColumnoptixRtnOduLHScanResultSlaveRslread-onlycurrentIndicates the slave Rsl of frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.51TableoptixRtnOduFreqScanExtTablenot-accessiblecurrentDescribes the information about RF unit start, frequency scanning stop, and obtaining of interfering frequency.
1.3.6.1.2.1.10.4.40.4.10.51.1RowoptixRtnOduFreqScanExtEntrynot-accessiblecurrentIndicates the parameter entry for RF unit frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.51.1.1ColumnoptixRtnOduStartScanStartFreqExtread-writecurrentIndicates the start frequency of frequency scanning. Unit:KHz
1.3.6.1.2.1.10.4.40.4.10.51.1.2ColumnoptixRtnOduStartScanEndFreqExtread-writecurrentIndicates the end freqency of frequency scanning. Unit:KHz
1.3.6.1.2.1.10.4.40.4.10.51.1.3ColumnoptixRtnOduStartScanStepExtread-writecurrentIndicates the step of frequency scanning. Values for RTN300:1-15M,2-31M,3- 62M. Values for RTN900:11-1P5M,12-1P75M,13-3P5M,14-7M,15-14M
1.3.6.1.2.1.10.4.40.4.10.51.1.4ColumnoptixRtnOduStartScanBWidExtread-writecurrentIndicates the bandwidth of frequency scanning,for calculating available frequencies.
1.3.6.1.2.1.10.4.40.4.10.51.1.5ColumnoptixRtnOduStopFreqScanExtread-writecurrentIndicates the stop of frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.51.1.6ColumnoptixRtnOduInterferenceFreqBwidExtread-onlycurrentIndicates the configuration bandwidth.
1.3.6.1.2.1.10.4.40.4.10.51.1.7ColumnoptixRtnOduInterferenceFreqLeftChannelExtread-onlycurrentIndicates the left channel state of configuration frequency
1.3.6.1.2.1.10.4.40.4.10.51.1.8ColumnoptixRtnOduInterferenceFreqCfgChannelExtread-onlycurrentIndicates the current channel state of configuration frequency.
1.3.6.1.2.1.10.4.40.4.10.51.1.9ColumnoptixRtnOduInterferenceFreqRightChannelExtread-onlycurrentIndicates the right channel state of configuration frequency.
1.3.6.1.2.1.10.4.40.4.10.52TableoptixRtnOduPortFreqScanTablenot-accessiblecurrentDescribes the information about RF unit start, frequency scanning stop, and obtaining of interfering frequency(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.52.1RowoptixRtnOduPortFreqScanEntrynot-accessiblecurrentIndicates the parameter entry for RF unit frequency scanning(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.52.1.1ColumnoptixRtnOduPortStartScanStartFreqread-writecurrentIndicates the start frequency of frequency scanning(this node used only to 320 or 3202f). Unit:KHz
1.3.6.1.2.1.10.4.40.4.10.52.1.2ColumnoptixRtnOduPortStartScanEndFreqread-writecurrentIndicates the end freqency of frequency scanning(this node used only to 320 or 3202f). Unit:KHz
1.3.6.1.2.1.10.4.40.4.10.52.1.3ColumnoptixRtnOduPortStartScanStepread-writecurrentIndicates the step of frequency scanning(this node used only to 320 or 3202f). Values for RTN300:1-15M,2-31M,3- 62M. Values for RTN900:11-1P5M,12-1P75M,13-3P5M…
1.3.6.1.2.1.10.4.40.4.10.52.1.4ColumnoptixRtnOduPortStartScanBWidread-writecurrentIndicates the bandwidth of frequency scanning,for calculating available frequencies(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.52.1.5ColumnoptixRtnOduPortStopFreqScanread-writecurrentIndicates the stop of frequency scanning(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.52.1.6ColumnoptixRtnOduPortInterferenceFreqBwidread-onlycurrentIndicates the configuration bandwidth(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.52.1.7ColumnoptixRtnOduPortInterferenceFreqLeftChannelread-onlycurrentIndicates the left channel state of configuration frequency(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.52.1.8ColumnoptixRtnOduPortInterferenceFreqCfgChannelread-onlycurrentIndicates the current channel state of configuration frequency(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.52.1.9ColumnoptixRtnOduPortInterferenceFreqRightChannelread-onlycurrentIndicates the right channel state of configuration frequency(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.61TableoptixRtnOduFreqScanAvailFreqExtTablenot-accessiblecurrentDescribes Available frequencies of the RF unit frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.61.1RowoptixRtnOduFreqScanAvailFreqExtEntrynot-accessiblecurrentIndicates the parameter entry for the RF unit frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.61.1.1ColumnoptixRtnOduAvailFreqListExtnot-accessiblecurrentIndicates the list number of available frequencies.
1.3.6.1.2.1.10.4.40.4.10.61.1.2ColumnoptixRtnOduGetAvailableBwidExtread-onlycurrentIndicates the bandwidth that inputted when starting the frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.61.1.3ColumnoptixRtnOduGetAvailableTxfreqsExtread-onlycurrentIndicates the available freqencies of frequency scanning. Unit:KHz
1.3.6.1.2.1.10.4.40.4.10.62TableoptixRtnOduPortFreqScanAvailFreqTablenot-accessiblecurrentDescribes Available frequencies of the RF unit frequency scanning(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.62.1RowoptixRtnOduPortFreqScanAvailFreqEntrynot-accessiblecurrentIndicates the parameter entry for the RF unit frequency scanning(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.62.1.1ColumnoptixRtnOduPortAvailFreqListnot-accessiblecurrentIndicates the list number of available frequencies(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.62.1.2ColumnoptixRtnOduPortGetAvailableBwidread-onlycurrentIndicates the bandwidth that inputted when starting the frequency scanning(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.62.1.3ColumnoptixRtnOduPortGetAvailableTxfreqsread-onlycurrentIndicates the available freqencies of frequency scanning(this node used only to 320 or 3202f). Unit:KHz
1.3.6.1.2.1.10.4.40.4.10.71TableoptixRtnOduFreqScanResultExtTablenot-accessiblecurrentDescribes result of the RF unit frequency scanning
1.3.6.1.2.1.10.4.40.4.10.71.1RowoptixRtnOduFreqScanResultExtEntrynot-accessiblecurrentIndicates the parameter entry for the RF unit frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.71.1.1ColumnoptixRtnOduScanResultListExtnot-accessiblecurrentIndicates the list of RF scanning results.
1.3.6.1.2.1.10.4.40.4.10.71.1.2ColumnoptixRtnOduScanResultRxFreqExtread-onlycurrentIndicates the receive freqencies of frequency scanning. Unit:KHz
1.3.6.1.2.1.10.4.40.4.10.71.1.3ColumnoptixRtnOduScanResultRxRslExtread-onlycurrentIndicates the receive power of frequency scanning. Unit:0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.72TableoptixRtnOduPortFreqScanResultTablenot-accessiblecurrentDescribes result of the RF unit frequency scanning(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.72.1RowoptixRtnOduPortFreqScanResultEntrynot-accessiblecurrentIndicates the parameter entry for the RF unit frequency scanning(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.72.1.1ColumnoptixRtnOduPortScanResultListnot-accessiblecurrentIndicates the list of RF scanning results(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.72.1.2ColumnoptixRtnOduPortScanResultRxFreqread-onlycurrentIndicates the receive freqencies of frequency scanning. Unit:KHz
1.3.6.1.2.1.10.4.40.4.10.72.1.3ColumnoptixRtnOduPortScanResultRxRslread-onlycurrentIndicates the receive power of frequency scanning(this node used only to 320 or 3202f). Unit:0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.80NodeoptixRtnScanFreqTrapCommon
1.3.6.1.2.1.10.4.40.4.10.80.5NodeoptixRptRtnFreqScanEndEvent
1.3.6.1.2.1.10.4.40.4.10.80.5.1ScalaroptixRtnOduFreqScanEndIndexBidaccessible-for-notifycurrentIndicates the RF unit board ID.
1.3.6.1.2.1.10.4.40.4.10.80.5.2ScalaroptixRtnOduFreqScanEndIndexSubIDaccessible-for-notifycurrentIndicates the subboard ID.
1.3.6.1.2.1.10.4.40.4.10.80.5.3ScalaroptixRptRtnFreqScanEndStateaccessible-for-notifycurrentIndicates the stop type of frequency scanning. RTN900: 0-stopScanFreqStateNormal 1-stopScanFreqStateManual 2-stopScanFreqStateAbnormal 310/360/380/380H/380HN/3…
1.3.6.1.2.1.10.4.40.4.10.80.6NodeoptixRptRtnFreqScanEndExtEvent
1.3.6.1.2.1.10.4.40.4.10.80.6.1ScalaroptixRtnOduFreqScanEndExtIndexBidaccessible-for-notifycurrentIndicates the RF unit board ID(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.80.6.2ScalaroptixRtnOduFreqScanEndExtIndexSubIDaccessible-for-notifycurrentIndicates the subboard ID(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.80.6.3ScalaroptixRtnOduFreqScanEndExtIndexPidaccessible-for-notifycurrentIndicates the port ID(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.80.6.4ScalaroptixRptRtnFreqScanEndExtStateaccessible-for-notifycurrentIndicates the stop type of frequency scanning(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.90NodeoptixRtnScanTrap
1.3.6.1.2.1.10.4.40.4.10.90.3NotificationoptixRtnModuScanFreqFinishTrapcurrentIndicates the finish event of frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.90.4NotificationoptixRtnFreqScanEndTrapcurrentIndicates the finish event of frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.90.5NotificationoptixRtnFreqScanEndExtTrapcurrentIndicates the finish event of frequency scanning(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.100TableoptixRtnOduTemplateTablenot-accessiblecurrentDescribes parameters of the ODU template.
1.3.6.1.2.1.10.4.40.4.10.100.1RowoptixRtnOduTemplateEntrynot-accessiblecurrentIndicates the parameter entry for the ODU template
1.3.6.1.2.1.10.4.40.4.10.100.1.1ColumnoptixRtnOduTemplateread-writecurrentIndicates the template of an RF port.
1.3.6.1.2.1.10.4.40.4.10.102TableoptixRtnIFModuTablenot-accessiblecurrentIndicates the table of general attributes of an MODU.
1.3.6.1.2.1.10.4.40.4.10.102.1RowoptixRtnIFModuEntrynot-accessiblecurrentIndicates an entry of general attributes of an MODU.
1.3.6.1.2.1.10.4.40.4.10.102.1.4ColumnoptixRtnModuLoopread-writecurrentIndicates the loop mode: 0:no loop 1:in loop
1.3.6.1.2.1.10.4.40.4.10.102.1.5ColumnoptixRtnModuFreqBandread-onlycurrentIndicates the frequency band, expressed in GHz.
1.3.6.1.2.1.10.4.40.4.10.102.1.6ColumnoptixRtnModuDeviceTyperead-onlycurrentIndicates the MODU device type: 10-Low Capacity 5-High Capacity 11-RFU 12-RFU-SD 13-XMC-3 14-XMC-3W 15-XMC-3H 16-XMC-5D
1.3.6.1.2.1.10.4.40.4.10.102.1.7ColumnoptixRtnModuInfoTRSpacingread-onlycurrentIndicates the T/R spacing, expressed in kHz.
1.3.6.1.2.1.10.4.40.4.10.102.1.8ColumnoptixRtnModuBandWidthread-onlycurrentIndicates the supported IF bandwidth. If the value is between 0 and 149, it indicates the actual bandwidth in the unit of MHz. If the value is between 150 and …
1.3.6.1.2.1.10.4.40.4.10.102.1.9ColumnoptixRtnModuBandWidthTyperead-onlycurrentIndicates whether the supported IF bandwidth is variable. The values are as follows: 0: fixed 1: variable
1.3.6.1.2.1.10.4.40.4.10.102.1.10ColumnoptixRtnModuHLStationread-onlycurrentIndicates whether a station is high or low station. 5: Tx-Low (low station) 10: Tx-High (high station) 0: undifferentiated
1.3.6.1.2.1.10.4.40.4.10.102.1.11ColumnoptixRtnModuPowerTyperead-onlycurrentIndicates the transmit power type of the MODU. 5: standard output power 10: high output power
1.3.6.1.2.1.10.4.40.4.10.102.1.12ColumnoptixRtnModuFactoryCoderead-onlycurrentIndicates the vendor code.
1.3.6.1.2.1.10.4.40.4.10.102.1.13ColumnoptixRtnModuProducedYearread-onlycurrentIndicates the manufacture year.
1.3.6.1.2.1.10.4.40.4.10.102.1.14ColumnoptixRtnModuProducedMonthread-onlycurrentIndicates the manufacture month.
1.3.6.1.2.1.10.4.40.4.10.102.1.15ColumnoptixRtnModuSNCoderead-onlycurrentIndicates the production sequence number.
1.3.6.1.2.1.10.4.40.4.10.103TableoptixRtnModuTablenot-accessiblecurrentDescribes parameters of the MODU.
1.3.6.1.2.1.10.4.40.4.10.103.1RowoptixRtnModuEntrynot-accessiblecurrentIndicates the parameter entry for the MODU.
1.3.6.1.2.1.10.4.40.4.10.103.1.5ColumnoptixRtnModuSrPowerread-writecurrentIndicates the transmit power of an RF port. Signed type Value range: -100 to +350 Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.103.1.6ColumnoptixRtnModuMaxPowerread-writecurrentIndicates the transmit power of an RF port. Signed type Value range: -100 to +350 Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.103.1.7ColumnoptixRtnModuTxPowerread-writecurrentIndicates the transmit power of an RF port. Signed type Value range: -100 to +350 Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.103.1.8ColumnoptixRtnModuWorkStateread-writecurrentIndicates the transmission actual status of an RF transmitter. Values: 0: muted 1: unmuted
1.3.6.1.2.1.10.4.40.4.10.103.1.9ColumnoptixRtnModuTRSpacingread-writecurrentIndicates the TR spacing of an RF unit board to avoid interference. Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.103.1.10ColumnoptixRtnModuTxFreqread-writecurrentIndicates the actual transmit frequency of an RF unit. Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.103.1.11ColumnoptixRtnModuRxPowerHighThread-writecurrentIndicates the upper threshold of the receive power. Signed type The value range: -900 to -200 Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.103.1.12ColumnoptixRtnModuRxPowerLowTHread-writecurrentIndicates the lower threshold of the receive power. Signed type The value range: -900 to -200 Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.103.1.13ColumnoptixRtnModuTxPowerHighThread-writecurrentIndicates the upper threshold of the transmit power. Signed type Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.103.1.14ColumnoptixRtnModuTxPowerLowTHread-writecurrentIndicates the upper threshold of the transmit power. Signed type Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.103.1.15ColumnoptixRtnModuMinTxPowerread-onlycurrentIndicates the Lower threshold of the transmit power. Signed type The value range: -100 to +350 Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.103.1.16ColumnoptixRtnModuMaxTxPowerread-onlycurrentIndicates the upper threshold of the transmit power. Signed type The value range: -100 to +350 Unit: 0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.103.1.17ColumnoptixRtnModuMinTxFreqread-onlycurrentIndicates the minimum transmit frequency of a RF unit. Unit: KHz
1.3.6.1.2.1.10.4.40.4.10.103.1.18ColumnoptixRtnModuMaxTxFreqread-onlycurrentIndicates the maximum transmit frequency of a RF unit. Unit: KHz
1.3.6.1.2.1.10.4.40.4.10.103.1.19ColumnoptixRtnModuMuteread-onlycurrentIndicates the working status of RF unit. Values: 0: muted 1: unmuted
1.3.6.1.2.1.10.4.40.4.10.103.1.20ColumnoptixRtnModuRealTxFreqread-onlycurrentIndicates the actual real transmit frequency of an RF unit. Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.103.1.21ColumnoptixRtnModuRealRxFreqread-onlycurrentIndicates the actual receive frequency of an RF unit. Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.103.1.22ColumnoptixRtnModuRealCfgPowerread-onlycurrentIndicates the real configure power of the RF unit.The unit is 0.1 dBm (signed number).
1.3.6.1.2.1.10.4.40.4.10.103.1.23ColumnoptixRtnModuRealTxPowerread-onlycurrentIndicates the real transmit power of the RF unit.The unit is 0.1 dBm (signed number).
1.3.6.1.2.1.10.4.40.4.10.103.1.24ColumnoptixRtnModuRealRxPowerread-onlycurrentIndicates the real receive power of the RF unit.The unit is 0.1 dBm (signed number).
1.3.6.1.2.1.10.4.40.4.10.103.1.25ColumnoptixRtnModuRealTRSpacingread-onlycurrentIndicates the real TR spacing of an RF unit. Unit: kHz
1.3.6.1.2.1.10.4.40.4.10.103.1.26ColumnoptixRtnModuFmTxPowerread-writecurrentIndicates the transmit power of an FM.The unit is 0.1 dBm (signed number).
1.3.6.1.2.1.10.4.40.4.10.103.1.27ColumnoptixRtnModuWorkWithFmread-writecurrentIndicates the MODU work status.
1.3.6.1.2.1.10.4.40.4.10.103.1.28ColumnoptixRtnModuAMTslRangeread-onlycurrentIndicates the MODU AM transmit power range.
1.3.6.1.2.1.10.4.40.4.10.103.1.29ColumnoptixRtnModuFadeMarginread-writecurrentIndicates the MODU FadeMargin.
1.3.6.1.2.1.10.4.40.4.10.105TableoptixRtnOduTypeInfoTablenot-accessiblecurrentIndicates the type of ODU.
1.3.6.1.2.1.10.4.40.4.10.105.1RowoptixRtnOduTypeInfoEntrynot-accessiblecurrentIndicates the type of ODU.
1.3.6.1.2.1.10.4.40.4.10.105.1.1ColumnoptixRtnLinkReportOduTyperead-onlycurrentIndicates the type of LinkReportODU.
1.3.6.1.2.1.10.4.40.4.10.105.1.2ColumnoptixRtnEquipOduTyperead-onlycurrentIndicates the type of EquipODU.
1.3.6.1.2.1.10.4.40.4.10.107TableoptixRtnOduResetTablenot-accessiblecurrentIndicates the table for setting the ODU reset mode(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.107.1RowoptixRtnOduResetEntrynot-accessiblecurrentIndicates an entry for setting the ODU reset mode(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.107.1.2ColumnoptixRtnOduResetTyperead-writecurrentIndicates the ODU reset mode(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.108TableoptixRtnOduInfoExtTablenot-accessiblecurrentDescribes ODU information.
1.3.6.1.2.1.10.4.40.4.10.108.1RowoptixRtnOduInfoExtEntrynot-accessiblecurrentIndicates an ODU information entry.
1.3.6.1.2.1.10.4.40.4.10.108.1.1ColumnoptixRtnOduFreqBandExtread-onlycurrentIndicates the frequency band, expressed in GHz.
1.3.6.1.2.1.10.4.40.4.10.108.1.2ColumnoptixRtnOduDeviceTypeExtread-onlycurrentIndicates the ODU device type: sdh(Use only 360 or 380 or 380H or 380hn or 380a or 380ax) highCapacity pdh(Use only 360 or 380 or 380H or 380hn or 380a or 380a…
1.3.6.1.2.1.10.4.40.4.10.108.1.3ColumnoptixRtnOduTRSpacingExtread-onlycurrentIndicates the T/R spacing, expressed in kHz.
1.3.6.1.2.1.10.4.40.4.10.108.1.4ColumnoptixRtnOduIFBandWidthExtread-onlycurrentIndicates the supported IF bandwidth. If the value is between 0 and 149, it indicates the actual bandwidth in the unit of MHz. If the value is between 150 and …
1.3.6.1.2.1.10.4.40.4.10.108.1.5ColumnoptixRtnOduIFBandWidthTypeExtread-onlycurrentIndicates whether the supported IF bandwidth is variable. The values are as follows: 0: fixed 1: variable
1.3.6.1.2.1.10.4.40.4.10.108.1.6ColumnoptixRtnOduHighorLowStationExtread-onlycurrentIndicates whether a station is high or low station. 5: Tx-Low (low station) 10: Tx-High (high station) 0: undifferentiated
1.3.6.1.2.1.10.4.40.4.10.108.1.7ColumnoptixRtnOduPowerTypeExtread-onlycurrentIndicates the transmit power type of an ODU. 5: standard output power 10: high output power
1.3.6.1.2.1.10.4.40.4.10.108.1.8ColumnoptixRtnOduFactoryCodeExtread-onlycurrentIndicates the vendor code.
1.3.6.1.2.1.10.4.40.4.10.108.1.9ColumnoptixRtnOduProducedYearExtread-onlycurrentIndicates the manufacture year.
1.3.6.1.2.1.10.4.40.4.10.108.1.10ColumnoptixRtnOduProducedMonthExtread-onlycurrentIndicates the manufacture month.
1.3.6.1.2.1.10.4.40.4.10.108.1.11ColumnoptixRtnOduSNCodeExtread-onlycurrentIndicates the production sequence number.
1.3.6.1.2.1.10.4.40.4.10.109TableoptixRtnOduPortInfoTablenot-accessiblecurrentDescribes ODU information(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.109.1RowoptixRtnOduPortInfoEntrynot-accessiblecurrentIndicates an ODU information entry(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.109.1.1ColumnoptixRtnOduPortFreqBandread-onlycurrentIndicates the frequency band, expressed in GHz(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.109.1.2ColumnoptixRtnOduPortDeviceTyperead-onlycurrentIndicates the ODU device type(this node used only to 320 or 3202f): 5-High Capacity 10-Low Capacity 13-XMC-3 14-XMC-3W 15-XMC-3H 16-XMC-5D 17-XMC-3E
1.3.6.1.2.1.10.4.40.4.10.109.1.3ColumnoptixRtnOduPortTRSpacingread-onlycurrentIndicates the T/R spacing, expressed in kHz(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.109.1.4ColumnoptixRtnOduPortIFBandWidthread-onlycurrentIndicates the supported IF bandwidth(this node used only to 320 or 3202f). If the value is between 0 and 149, it indicates the actual bandwidth in the unit of …
1.3.6.1.2.1.10.4.40.4.10.109.1.5ColumnoptixRtnOduPortIFBandWidthTyperead-onlycurrentIndicates whether the supported IF bandwidth is variable(this node used only to 320 or 3202f). The values are as follows: 0: fixed 1: variable
1.3.6.1.2.1.10.4.40.4.10.109.1.6ColumnoptixRtnOduPortHighorLowStationread-onlycurrentIndicates whether a station is high or low station(this node used only to 320 or 3202f). 5: Tx-Low (low station) 10: Tx-High (high station) 0: undifferentiated
1.3.6.1.2.1.10.4.40.4.10.109.1.7ColumnoptixRtnOduPortPowerTyperead-onlycurrentIndicates the transmit power type of an ODU(this node used only to 320 or 3202f). 5: standard output power 10: high output power
1.3.6.1.2.1.10.4.40.4.10.109.1.8ColumnoptixRtnOduPortFactoryCoderead-onlycurrentIndicates the vendor code(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.109.1.9ColumnoptixRtnOduPortProducedYearread-onlycurrentIndicates the manufacture year(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.109.1.10ColumnoptixRtnOduPortProducedMonthread-onlycurrentIndicates the manufacture month(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.109.1.11ColumnoptixRtnOduPortSNCoderead-onlycurrentIndicates the production sequence number(this node used only to 320 or 3202f).
1.3.6.1.2.1.10.4.40.4.10.110TableoptixRtnCombineTablenot-accessiblecurrentIndicates the parameters of the RFU-SD combination mode.
1.3.6.1.2.1.10.4.40.4.10.110.1RowoptixRtnCombineEntrynot-accessiblecurrentIndicates the parameter entry for the RFU-SD combine mode.
1.3.6.1.2.1.10.4.40.4.10.110.1.1ColumnoptixRtnCombineModeread-writecurrentIndicates the RFU-SD combination mode.
1.3.6.1.2.1.10.4.40.4.10.110.1.2ColumnoptixRtnCombineActualModeread-onlycurrentIndicates the RFU-SD actual combination mode.
1.3.6.1.2.1.10.4.40.4.10.111TableoptixRtnModuFreqScanTablenot-accessiblecurrentDescribes the information about RF unit start, frequency scanning stop, and obtaining of interfering frequency.
1.3.6.1.2.1.10.4.40.4.10.111.1RowoptixRtnModuFreqScanEntrynot-accessiblecurrentIndicates the parameter entry for RF unit frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.111.1.1ColumnoptixRtnModuStartScanStartFreqread-writecurrentIndicates the start frequency of frequency scanning. Unit:KHz
1.3.6.1.2.1.10.4.40.4.10.111.1.2ColumnoptixRtnModuStartScanEndFreqread-writecurrentIndicates the end freqency of frequency scanning. Unit:KHz
1.3.6.1.2.1.10.4.40.4.10.111.1.3ColumnoptixRtnModuStartScanStepread-writecurrentIndicates the step of frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.111.1.4ColumnoptixRtnModuStartScanBWidread-writecurrentIndicates the bandwidth of frequency scanning,for calculating available frequencies.
1.3.6.1.2.1.10.4.40.4.10.111.1.5ColumnoptixRtnModuStopFreqScanread-writecurrentIndicates the stop of frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.111.1.6ColumnoptixRtnModuInterferenceFreqBwidread-onlycurrentIndicates the configuration bandwidth.
1.3.6.1.2.1.10.4.40.4.10.111.1.7ColumnoptixRtnModuInterferenceFreqLeftChannelread-onlycurrentIndicates the left channel state of configuration frequency
1.3.6.1.2.1.10.4.40.4.10.111.1.8ColumnoptixRtnModuInterferenceFreqCfgChannelread-onlycurrentIndicates the current channel state of configuration frequency.
1.3.6.1.2.1.10.4.40.4.10.111.1.9ColumnoptixRtnModuInterferenceFreqRightChannelread-onlycurrentIndicates the right channel state of configuration frequency.
1.3.6.1.2.1.10.4.40.4.10.112TableoptixRtnModuFreqScanAvailFreqTablenot-accessiblecurrentDescribes Available frequencies of the RF unit frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.112.1RowoptixRtnModuFreqScanAvailFreqEntrynot-accessiblecurrentIndicates the parameter entry for the RF unit frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.112.1.2ColumnoptixRtnModuGetAvailableBwidread-onlycurrentIndicates the bandwidth that inputted when starting the frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.112.1.3ColumnoptixRtnModuGetAvailableTxfreqsread-onlycurrentIndicates the available freqencies of frequency scanning. Unit:KHz
1.3.6.1.2.1.10.4.40.4.10.113TableoptixRtnModuFreqScanResultTablenot-accessiblecurrentDescribes result of the RF unit frequency scanning
1.3.6.1.2.1.10.4.40.4.10.113.1RowoptixRtnModuFreqScanResultEntrynot-accessiblecurrentIndicates the parameter entry for the RF unit frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.113.1.2ColumnoptixRtnModuScanResultRxFreqread-onlycurrentIndicates the receive freqencies of frequency scanning. Unit:KHz
1.3.6.1.2.1.10.4.40.4.10.113.1.3ColumnoptixRtnModuScanResultRxRslread-onlycurrentIndicates the receive power of frequency scanning. Unit:0.1 dBm
1.3.6.1.2.1.10.4.40.4.10.114NodeoptixRtnModuScanFreqTrapCommon
1.3.6.1.2.1.10.4.40.4.10.114.1NodeoptixRtnModuFreqScanFinishEvent
1.3.6.1.2.1.10.4.40.4.10.114.1.1ScalaroptixRtnModuBoardIDaccessible-for-notifycurrentIndicates the RF unit board ID.
1.3.6.1.2.1.10.4.40.4.10.114.1.2ScalaroptixRtnModuSubCardIDaccessible-for-notifycurrentIndicates the subboard ID.
1.3.6.1.2.1.10.4.40.4.10.114.1.3ScalaroptixRtnModuPortIDaccessible-for-notifycurrentIndicates the port number of the main port.
1.3.6.1.2.1.10.4.40.4.10.114.1.4ScalaroptixRtnModuCarrierIDaccessible-for-notifycurrentIndicates the carrier ID.
1.3.6.1.2.1.10.4.40.4.10.114.1.5ScalaroptixRtnModuFreqScanStopStateaccessible-for-notifycurrentIndicates the stop type of frequency scanning.
1.3.6.1.2.1.10.4.40.4.10.115TableoptixRtnModuRFUFreqTablenot-accessiblecurrentIndecates the parameters related to the RFU receive frequency of the MODU.
1.3.6.1.2.1.10.4.40.4.10.115.1RowoptixRtnModuRFUFreqEntrynot-accessiblecurrentIndicates the entry of the RFU receive frequency parameter of the MODU.
1.3.6.1.2.1.10.4.40.4.10.115.1.5ColumnoptixRtnModuRFURxFreqread-writecurrentIndicates the RFU receive frequence of the MODU. The unit is kHz.
1.3.6.1.2.1.10.4.40.4.10.115.1.6ColumnoptixRtnModuRFUMinRxFreqread-onlycurrentIndicates the minimun value of the working range of the RFU receive freqencies. The unit is kHz.
1.3.6.1.2.1.10.4.40.4.10.115.1.7ColumnoptixRtnModuRFUMaxRxFreqread-onlycurrentIndicates the maximum value of the working range of the RFU receive freqencies. The unit is kHz.
1.3.6.1.2.1.10.4.40.4.10.120TableoptixRtnSlavePowerTablenot-accessiblecurrentIndicates the parameters related to the receive power of the RFU-SD slave port.
1.3.6.1.2.1.10.4.40.4.10.120.1RowoptixRtnSlavePowerEntrynot-accessiblecurrentIndicates the entry of the power parameters of the RFU-SD slave port.
1.3.6.1.2.1.10.4.40.4.10.120.1.1ColumnoptixRtnSlaveCfgToBeRxPowerread-writecurrentIndicates the power expected to be received of the RFU-SD slave port. The unit is 0.1 dBm.
1.3.6.1.2.1.10.4.40.4.10.120.1.2ColumnoptixRtnSlaveRxPowerHighThread-writecurrentIndicates the upper threshold of the receive power of the RFU-SD slave port.The unit is 0.1 dBm (signed number).
1.3.6.1.2.1.10.4.40.4.10.120.1.3ColumnoptixRtnSlaveRxPowerLowThread-writecurrentIndicates the lower threshold of the receive power of the RFU-SD slave port.The unit is 0.1 dBm (signed number).
1.3.6.1.2.1.10.4.40.4.10.120.1.4ColumnoptixRtnSlaveActualRxPowerread-onlycurrentIndicates the actual receive power of the RFU-SD slave port.The unit is 0.1 dBm (signed number).
1.3.6.1.2.1.10.4.40.4.10.120.1.5ColumnoptixRtnMainActualRxPowerread-onlycurrentIndicates the actual receive power of the RFU-SD main port.The unit is 0.1 dBm (signed number).
1.3.6.1.2.1.10.4.40.4.10.120.1.6ColumnoptixRtnRealRxPowerread-onlycurrentIndicates the real receive power of the RFU-SD slave port.The unit is 0.1 dBm (signed number).
1.3.6.1.2.1.10.4.40.4.10.130TableoptixRtnFiberEqualTablenot-accessiblecurrentIndicates the parameters of the RFU-SD delay compensation.
1.3.6.1.2.1.10.4.40.4.10.130.1RowoptixRtnFiberEqualEntrynot-accessiblecurrentIndicates the entry of the RFU-SD delay compensation parameter.
1.3.6.1.2.1.10.4.40.4.10.130.1.1ColumnoptixRtnFiberEqualStateread-writecurrentIndicates the status of the RFU-SD delay compensation.
1.3.6.1.2.1.10.4.40.4.10.130.1.2ColumnoptixRtnFiberEqualValueread-onlycurrentIndicates the value of the RFU-SD delay compensation.
1.3.6.1.2.1.10.4.40.4.10.140TableoptixRtnRFUFrequencyTablenot-accessiblecurrentIndicates the parameters related to the RFU receive frequency.
1.3.6.1.2.1.10.4.40.4.10.140.1RowoptixRtnRFUFrequencyEntrynot-accessiblecurrentIndicates the entry of the RFU receive frequency parameter.
1.3.6.1.2.1.10.4.40.4.10.140.1.1ColumnoptixRtnRFURxFreqread-writecurrentIndicates the receive frequency of the RFU. The unit is KHz.
1.3.6.1.2.1.10.4.40.4.10.140.1.2ColumnoptixRtnRFUMinRxFreqread-onlycurrentIndicates the minimum value of the working range of the RFU receive frequencies. The unit is KHz.
1.3.6.1.2.1.10.4.40.4.10.140.1.3ColumnoptixRtnRFUMaxRxFreqread-onlycurrentIndicates the maximum value of the working range of the RFU receive frequencies. The unit is KHz.
1.3.6.1.2.1.10.4.40.4.10.150NodeoptixRFUTrapCommon
1.3.6.1.2.1.10.4.40.4.10.150.1NodeoptixRFUTrapEvent
1.3.6.1.2.1.10.4.40.4.10.150.1.1ScalaroptixRptRtnRFUBidaccessible-for-notifycurrentIndicates the slot ID of the RFU board.
1.3.6.1.2.1.10.4.40.4.10.150.1.2ScalaroptixRptRtnRFUSubCardIdaccessible-for-notifycurrentIndicates the slot ID of the RFU subboard.
1.3.6.1.2.1.10.4.40.4.10.150.1.3ScalaroptixRptRtnFiberEqualResultaccessible-for-notifycurrentIndicates the result of the delay compensation.
1.3.6.1.2.1.10.4.40.4.10.150.1.4ScalaroptixRptRtnFiberEqualValueaccessible-for-notifycurrentIndicates the value of the delay compensation.
1.3.6.1.2.1.10.4.40.4.10.160NodeoptixRtnFiberEqualTrap
1.3.6.1.2.1.10.4.40.4.10.160.1NotificationoptixRtnFiberEqualResultTrapcurrentIndicates the result of the delay compensation.
1.3.6.1.2.1.10.4.40.4.10.170TableoptixRtnRfuIndexTablenot-accessiblecurrentServes as the public index table for attribute tables related to an RFU.
1.3.6.1.2.1.10.4.40.4.10.170.1RowoptixRtnRfuIndexEntrynot-accessiblecurrentIndicates the index entry for an RFU.
1.3.6.1.2.1.10.4.40.4.10.170.1.1ColumnoptixRtnRFUBidnot-accessiblecurrentIndicates the RFU board ID.
1.3.6.1.2.1.10.4.40.4.10.170.1.2ColumnoptixRtnRFUSubCardIdnot-accessiblecurrentIndicates the subboard ID.
1.3.6.1.2.1.10.4.40.4.10.180TableoptixRtnOduDuplexInfoTablenot-accessiblecurrentIndicates the information of an ODU's duplexer entry
1.3.6.1.2.1.10.4.40.4.10.180.1RowoptixRtnOduDuplexInfoEntrynot-accessiblecurrentIndicates the information of an ODU's duplexer entry
1.3.6.1.2.1.10.4.40.4.10.180.1.1ColumnoptixRtnOduDuplexSubFrequenceread-onlycurrentIndicates the frequency sub-band of an ODU's duplexer.
1.3.6.1.2.1.10.4.40.4.10.180.1.2ColumnoptixRtnOduDuplexTRSpacingread-onlycurrentIndicates the T/R spacing of an ODU's duplexer, expressed in kHz.
1.3.6.1.2.1.10.4.40.4.10.180.1.3ColumnoptixRtnOduDuplexFreqMinread-onlycurrentIndicates the minimum frequency of an ODU's duplexer, expressed in kHz.
1.3.6.1.2.1.10.4.40.4.10.180.1.4ColumnoptixRtnOduDuplexFreqMaxread-onlycurrentIndicates the maximum frequency of an ODU's duplexer, expressed in kHz.
1.3.6.1.2.1.10.4.40.4.10.190TableoptixRtnFlapLinkDownTablenot-accessiblecurrentIndicates the flapping-linkdown state.
1.3.6.1.2.1.10.4.40.4.10.190.1RowoptixRtnFlapLinkDownEntrynot-accessiblecurrentIndicates the flapping-linkdown state.
1.3.6.1.2.1.10.4.40.4.10.190.1.1ColumnoptixRtnOduFlapLinkDownStatusread-writecurrentIndicates the flapping-linkdown status,it has two mode type:disable(0),enable(1).
1.3.6.1.2.1.10.4.40.4.10.190.1.2ColumnoptixRtnOduFlapLinkDownChecktimeread-writecurrentIndicates the check time of flapping-linkdown,enable:30~180,disable:0.Unit:second.
1.3.6.1.2.1.10.4.40.4.10.190.1.3ColumnoptixRtnOduFlapLinkDownFrequencyread-writecurrentIndicates the freqency of turnning off threshold, enable:3~30,disable:0.
1.3.6.1.2.1.10.4.40.4.10.190.1.4ColumnoptixRtnOduFlapLinkRecoveryTimeread-writecurrentIndicates the recoveryTime of flapping-linkdown, enable:0~30,0 represents not automatically recovery,disable:0.Unit:minute.
1.3.6.1.2.1.10.4.40.4.10.260TableoptixRtnModuRfModeTablenot-accessiblecurrentIndicates the parameter table for the RF mode.
1.3.6.1.2.1.10.4.40.4.10.260.1RowoptixRtnModuRfModeEntrynot-accessiblecurrentIndicates the parameter entry for the RF mode.
1.3.6.1.2.1.10.4.40.4.10.260.1.1ColumnoptixRtnModuRfModeread-writecurrentIndicates the mode of RF.
1.3.6.1.2.1.10.4.40.4.10.261TableoptixRtnOduPortCrossTablenot-accessiblecurrentDescribes the cross status of odu port.
1.3.6.1.2.1.10.4.40.4.10.261.1RowoptixRtnOduPortCrossEntrynot-accessiblecurrentDescribes the cross status of odu port.
1.3.6.1.2.1.10.4.40.4.10.261.1.1ColumnoptixRtnOduPortCrossStatusread-writecurrentDescribes the cross status of odu port. Cross-state only for modu
1.3.6.1.2.1.10.4.40.4.10.262TableoptixRtnOduBoosterEnTablenot-accessiblecurrentDescribes the booster-type enable state of odu.
1.3.6.1.2.1.10.4.40.4.10.262.1RowoptixRtnOduBoosterEnEntrynot-accessiblecurrentDescribes the booster-type enable state of odu.
1.3.6.1.2.1.10.4.40.4.10.262.1.1ColumnoptixRtnOduBidnot-accessiblecurrentIndicates the board id of odu.
1.3.6.1.2.1.10.4.40.4.10.262.1.2ColumnoptixRtnOduSidnot-accessiblecurrentIndicates the sub-board id of odu.
1.3.6.1.2.1.10.4.40.4.10.262.1.3ColumnoptixRtnOduBoosterTypenot-accessiblecurrentIndicates the booster-type of odu. 0:BASE-TSL.
1.3.6.1.2.1.10.4.40.4.10.262.1.4ColumnoptixRtnOduEnableStateread-writecurrentIndicates the enable state of booster-type of odu. Enable-state only for modu.
Type Definitions
NameSyntaxStatusDescription
OPTIXRtnCombineModeINTEGER { main(0), slave(1), combine(2) }currentIndicates the combine mode of a RFU-SD board.
OPTIXRtnFiberEqualStateINTEGER { start(1) }currentIndicates RFU-SD fiber equal state.
OPTIXRtnOduBandWidthTypeINTEGER { bw3P5M(1), bw7M(2), bw14M(3), bw28M(4), bw40M(5), bw56M(6), bwFCC30M(7), bwFCC40M(8), bwFCC50M(9), bw250M(10), bw500M(11), bw750M(12), bw62P5M(16), bw125M(17), bw1000M(18), bw200M(22), bwFCC10M(24), bwFCC20M(25), bw1500M(26), bw2000M(27), bwFCC60M(28) }currentDescribes the channel spacing supported by an IF board. Values: 10: 250M; 11: 500M; 12:750M; 18:1000M; 26:1500M; 27:2000M
OPTIXRtnOduPortBandWidthTypeINTEGER { bw7M(2), bw14M(3), bw28M(4), bw40M(5), bw56M(6), bwFCC30M(7), bwFCC40M(8), bwFCC50M(9), bw112M(23), bw80M(34) }currentDescribes the channel spacing supported by an IF board. Values: 10: 250M; 11: 500M; 12:750M; 18:1000M; 26:1500M; 27:2000M
OPTIXRtnOduWorkStateTypeINTEGER { mute(0), unmute(1) }currentIndicates the working status of RF unit. Values: 0: muted 1: unmuted