MIB Viewer

OPTIX-SEP-MIB

99 objects
This MIB describes SEP information, including SEP configurations, SEP port information, and SEP topology information.
Imported Objects
OPTIX-OID-MIBoptixProvisionPtn
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIInteger32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCRowStatus
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.4.50.36IdentityoptixSEPModThis MIB describes SEP information, including SEP configurations, SEP port information, and SEP topology information.
1.3.6.1.2.1.10.4.50.36.1NodeoptixSEPObject
1.3.6.1.2.1.10.4.50.36.1.1TableoptixSEPConfigInfoTablenot-accessiblecurrentThis table contains configuration information of SEP.
1.3.6.1.2.1.10.4.50.36.1.1.1RowoptixSEPConfigInfoEntrynot-accessiblecurrentThis entry contains configuration information of SEP.
1.3.6.1.2.1.10.4.50.36.1.1.1.1ColumnoptixSEPIDnot-accessiblecurrentThis node indicates the SEP protection ID.
1.3.6.1.2.1.10.4.50.36.1.1.1.2ColumnoptixSEPCtrVlanread-writecurrentThis node indicates the SEP control VLAN ID, which ranges from 1 to 4094 and must be different from service VLAN IDs.
1.3.6.1.2.1.10.4.50.36.1.1.1.3ColumnoptixSEPSrvVlanNumread-writecurrentThis node indicates the SEP service VLAN quantity, which ranges from 0 to 253. Value 0 indicates that all services on the port are protected.
1.3.6.1.2.1.10.4.50.36.1.1.1.4ColumnoptixSEPSrvVlanListread-writecurrentThis node indicates the SEP service VLAN ID list.
1.3.6.1.2.1.10.4.50.36.1.1.1.5ColumnoptixSEPPreemtModeread-writecurrentThis node indicates the SEP preemption mode. Value 1 indicates the non-preemption mode; value 2 indicates the manual preemption mode; value 3 indicates the del…
1.3.6.1.2.1.10.4.50.36.1.1.1.6ColumnoptixSEPDelayTimeread-writecurrentThis node indicates the SEP preemption hold-off time, in seconds. The value ranges from 15 to 600, and the step is 1. The default value is 15.
1.3.6.1.2.1.10.4.50.36.1.1.1.7ColumnoptixSEPTCIntervalread-writecurrentThis node indicates the SEP TC hold-off time, in seconds. The value ranges from 1 to 10. The default value is 2.
1.3.6.1.2.1.10.4.50.36.1.1.1.8ColumnoptixSEPTCNotifyNumread-writecurrentThis node indicates the number of SEP nodes to be notified of the SEP TC. The value ranges from 0 to 8. Value 0 indicates that the SEP nodes are not notified.
1.3.6.1.2.1.10.4.50.36.1.1.1.9ColumnoptixSEPTCNotifyListread-writecurrentThis node indicates the list of SEP nodes to be notified of the SEP TC.
1.3.6.1.2.1.10.4.50.36.1.1.1.10ColumnoptixSEPAuthenTyperead-writecurrentThis node indicates the SEP authentication mode. Value 0 indicates that no authentication is performed; value 1 indicates that the authentication password is e…
1.3.6.1.2.1.10.4.50.36.1.1.1.11ColumnoptixSEPAuthenPwdread-writecurrentThis node indicates the SEP authentication password. It is set to a null character string if no authentication is performed and to a character string of 1 to 6…
1.3.6.1.2.1.10.4.50.36.1.1.1.12ColumnoptixSEPBlockModeread-writecurrentThis node indicates the SEP port blocking mode. Value 1 indicates that the port with the highest priority is the blocked port; value 2 indicates that an interm…
1.3.6.1.2.1.10.4.50.36.1.1.1.13ColumnoptixSEPBlockPortHopread-writecurrentThis node indicates the number of hops of the blocked port when the SEP port blocking mode is hop. This node is valid only when the block mode is hop and is se…
1.3.6.1.2.1.10.4.50.36.1.1.1.14ColumnoptixSEPBlockPortSysNameread-writecurrentThis node indicates the system name of the blocking port when the SEP port block mode is name. This node is valid only when the block mode is name and is not p…
1.3.6.1.2.1.10.4.50.36.1.1.1.15ColumnoptixSEPBlockPortNameread-writecurrentThis node indicates the name of the blocking port when the SEP port block mode is name. This node is valid only when the block mode is name and is not processe…
1.3.6.1.2.1.10.4.50.36.1.1.1.16ColumnoptixSEPNameread-writecurrentThis node describes the SEP name.
1.3.6.1.2.1.10.4.50.36.1.1.1.17ColumnoptixSEPClearPKTCountread-writecurrentThis node indicates whether to clear packet statistics on an SEP port. Value 0 indicates that the packet statistics are cleared.
1.3.6.1.2.1.10.4.50.36.1.1.1.18ColumnoptixSEPAddVlanListread-writecurrentThis node indicates the SEP service VLAN ID list to add.
1.3.6.1.2.1.10.4.50.36.1.1.1.19ColumnoptixSEPDelVlanListread-writecurrentThis node indicates the SEP service VLAN ID list to be deleted.
1.3.6.1.2.1.10.4.50.36.1.1.1.20ColumnoptixSEPSetSysNameTyperead-writecurrentSet a name type for the sep system.
1.3.6.1.2.1.10.4.50.36.1.2TableoptixSEPPortInfoTablenot-accessiblecurrentThis table contains information of SEP ports.
1.3.6.1.2.1.10.4.50.36.1.2.1RowoptixSEPPortInfoEntrynot-accessiblecurrentThis entry contains information of SEP ports.
1.3.6.1.2.1.10.4.50.36.1.2.1.1ColumnoptixSEPBoardIDnot-accessiblecurrentThis node indicates the slot ID of an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.2ColumnoptixSEPSubcardnot-accessiblecurrentThis node indicates the subboard ID of an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.3ColumnoptixSEPPortIDnot-accessiblecurrentThis node indicates the SEP port number.
1.3.6.1.2.1.10.4.50.36.1.2.1.4ColumnoptixSEPPortCfgRoleread-onlycurrentThis node indicates the configuration role of an SEP port. Value 0x10 indicates a common port; value 0x22 indicates the primary edge port; value 0x21 indicates…
1.3.6.1.2.1.10.4.50.36.1.2.1.5ColumnoptixSEPPortWorkRoleread-onlycurrentThis node indicates the running role of an SEP port. Value 0x10 indicates a common port; value 0x22 indicates the primary edge port; value 0x21 indicates the s…
1.3.6.1.2.1.10.4.50.36.1.2.1.6ColumnoptixSEPPortPriorityread-writecurrentThis node indicates the priority of an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.7ColumnoptixSEPPortStateread-onlycurrentThis node indicates the SEP port status. Value 0 indicates discarding; value 1 indicates forwarding.
1.3.6.1.2.1.10.4.50.36.1.2.1.8ColumnoptixSEPNeiPortSysNameread-onlycurrentThis node indicates the system name of the SEP neighbor port. The NE ID is used as the system name.
1.3.6.1.2.1.10.4.50.36.1.2.1.9ColumnoptixSEPNeiPortNameread-onlycurrentThis node indicates the SEP neighbor port name, which is a string in the format of Slot ID/Subboard ID/Port number.
1.3.6.1.2.1.10.4.50.36.1.2.1.10ColumnoptixSEPNeiPortMacread-onlycurrentThis node indicates the physical address of the SEP neighbor port.
1.3.6.1.2.1.10.4.50.36.1.2.1.11ColumnoptixSEPNeiPortIDread-onlycurrentThis node indicates the SEP neighbor port number.
1.3.6.1.2.1.10.4.50.36.1.2.1.12ColumnoptixSEPNeiPortStateread-onlycurrentThis node indicates the SEP neighbor port status. Value 0 indicates down; value 1 indicates initialized; value 2 indicates preup; value 3 indicates up; value 4…
1.3.6.1.2.1.10.4.50.36.1.2.1.13ColumnoptixSEPPortSendNBRTLVread-onlycurrentThis node indicates the statistics on the NBR TLV sent from an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.14ColumnoptixSEPPortSendLSPINFOTLVread-onlycurrentThis node indicates the statistics on the LSP INFO TLV sent from an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.15ColumnoptixSEPPortSendLSPACKTLVread-onlycurrentThis node indicates the statistics on the LSP ACK TLV sent from an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.16ColumnoptixSEPPortSendPREEMPTREGTLVread-onlycurrentThis node indicates the statistics on the PREEMPT REQ TLV sent from an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.17ColumnoptixSEPPortSendPREEMPTACKTLVread-onlycurrentThis node indicates the statistics on the PREEMPT ACK TLV sent from an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.18ColumnoptixSEPPortSendTCNotifyread-onlycurrentThis node indicates the statistics on the TC Notify sent from an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.19ColumnoptixSEPPortSendEPAread-onlycurrentThis node indicates the statistics on the EPA sent from an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.20ColumnoptixSEPPortRecvNBRTLVread-onlycurrentThis node indicates the statistics on the NBR TLV received by an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.21ColumnoptixSEPPortRecvLSPINFOTLVread-onlycurrentThis node indicates the statistics on the LSP INFO TLV received by an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.22ColumnoptixSEPPortRecvLSPACKTLVread-onlycurrentThis node indicates the statistics on the LSP ACK TLV received by an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.23ColumnoptixSEPPortRecvPREEMPTREGTLVread-onlycurrentThis node indicates the statistics on the PREEMPT REQ TLV received by an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.24ColumnoptixSEPPortRecvPREEMPTACKTLVread-onlycurrentThis node indicates the statistics on the PREEMPT ACK TLV received by an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.25ColumnoptixSEPPortRecvTCNotifyread-onlycurrentThis node indicates the statistics on the TC Notify received by an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.26ColumnoptixSEPPortRecvEPAread-onlycurrentThis node indicates the statistics on the EPA received by an SEP port.
1.3.6.1.2.1.10.4.50.36.1.2.1.27ColumnoptixSEPPortErrPkgread-onlycurrentThis node indicates the statistics on the error packets received by an SEP port.
1.3.6.1.2.1.10.4.50.36.1.3TableoptixSEPTopoTablenot-accessiblecurrentThis table contains topology information of SEP.
1.3.6.1.2.1.10.4.50.36.1.3.1RowoptixSEPTopoEntrynot-accessiblecurrentThis entry contains topology information of SEP.
1.3.6.1.2.1.10.4.50.36.1.3.1.1ColumnoptixSEPTopoIndexnot-accessiblecurrentThis node describes the SEP topology information record index.
1.3.6.1.2.1.10.4.50.36.1.3.1.2ColumnoptixSEPTopoSysNameread-onlycurrentThis node indicates the system name in the SEP topology information. The NE ID is used as the system name.
1.3.6.1.2.1.10.4.50.36.1.3.1.3ColumnoptixSEPTopoPortNameread-onlycurrentThis node indicates the port name in the SEP topology information, which is a string in the format of Slot ID/Subboard ID/Port number.
1.3.6.1.2.1.10.4.50.36.1.3.1.4ColumnoptixSEPTopoPortCfgRoleread-onlycurrentThis node indicates the port configuration role in the SEP topology information. Value 0x10 indicates a common port; value 0x22 indicates the primary edge port…
1.3.6.1.2.1.10.4.50.36.1.3.1.5ColumnoptixSEPTopoPortWorkRoleread-onlycurrentThis node indicates the port working role in the SEP topology information. Value 0x10 indicates a common port; value 0x22 indicates the primary edge port; valu…
1.3.6.1.2.1.10.4.50.36.1.3.1.6ColumnoptixSEPTopoPortMacread-onlycurrentThis node indicates the port physical address in the SEP topology information.
1.3.6.1.2.1.10.4.50.36.1.3.1.7ColumnoptixSEPTopoPortIDread-onlycurrentThis node indicates the port number in the SEP topology information.
1.3.6.1.2.1.10.4.50.36.1.3.1.8ColumnoptixSEPTopoPortPriorityread-onlycurrentThis node indicates the port priority in the SEP topology information.
1.3.6.1.2.1.10.4.50.36.1.3.1.9ColumnoptixSEPTopoPortStateread-onlycurrentThis node indicates the port status in the SEP topology information. Value 0 indicates discarding; value 1 indicates forwarding.
1.3.6.1.2.1.10.4.50.36.1.3.1.10ColumnoptixSEPTopoHopread-onlycurrentThis node indicates the number of hops in the SEP topology information.
1.3.6.1.2.1.10.4.50.36.1.3.1.11ColumnoptixSEPTopoLinkStateread-onlycurrentThis node indicates the link status in the SEP topology information. Value 0 indicates down; value 1 indicates up.
1.3.6.1.2.1.10.4.50.36.1.3.1.12ColumnoptixSEPTopoBroPortNameread-onlycurrentThis node indicates the brother port name in the SEP topology information, which is a string in the format of Slot ID/Subboard ID/Port number.
1.3.6.1.2.1.10.4.50.36.1.3.1.13ColumnoptixSEPTopoBroPortIDread-onlycurrentThis node indicates the brother port number in the SEP topology information.
1.3.6.1.2.1.10.4.50.36.1.3.1.14ColumnoptixSEPTopoNeiSysNameread-onlycurrentThis node indicates the neighbor system name in the SEP topology information. The NE ID is used as the system name.
1.3.6.1.2.1.10.4.50.36.1.3.1.15ColumnoptixSEPTopoNeiPortNameread-onlycurrentThis node indicates the neighbor system port name in the SEP topology information.
1.3.6.1.2.1.10.4.50.36.1.3.1.16ColumnoptixSEPTopoNeiSysMacread-onlycurrentThis node indicates the physical address of the neighbor system in the SEP topology information.
1.3.6.1.2.1.10.4.50.36.1.3.1.17ColumnoptixSEPTopoNeiPortIDread-onlycurrentThis node indicates the neighbor port number in the SEP topology information.
1.3.6.1.2.1.10.4.50.36.1.3.1.18ColumnoptixSEPTopoNeiStateread-onlycurrentThis node indicates the neighbor status in the SEP topology information. Value 0 indicates down; value 1 indicates init; value 2 indicates preup; value 3 indic…
1.3.6.1.2.1.10.4.50.36.1.3.1.19ColumnoptixSEPTopoAgeingTimeread-onlycurrentThis node indicates the aging time in the SEP topology information.
1.3.6.1.2.1.10.4.50.36.1.3.1.20ColumnoptixSEPTopoSerializationNumread-onlycurrentThis node indicates the serial number in the SEP topology information.
1.3.6.1.2.1.10.4.50.36.1.4TableoptixSEPCrtTablenot-accessiblecurrentThis table describes the information about SEP creation.
1.3.6.1.2.1.10.4.50.36.1.4.1RowoptixSEPCrtEntrynot-accessiblecurrentThis entry contains creating information of SEP.
1.3.6.1.2.1.10.4.50.36.1.4.1.1ColumnoptixSEPAddCtrVlanread-createcurrentThis node indicates the SEP control VLAN ID, which ranges from 1 to 4094 and must be different from service VLAN IDs.
1.3.6.1.2.1.10.4.50.36.1.4.1.2ColumnoptixSEPEastBoardIDread-createcurrentThis node indicates the slot ID of the SEP east port. Value 0xffff indicates that no east port is available.
1.3.6.1.2.1.10.4.50.36.1.4.1.3ColumnoptixSEPEastSubcardread-createcurrentThis node indicates the subboard ID of the SEP east port. Value 0xff indicates that no subboard is available.
1.3.6.1.2.1.10.4.50.36.1.4.1.4ColumnoptixSEPEastPortIDread-createcurrentThis node indicates the SEP east port number. Value 0xffff indicates that no east port is available.
1.3.6.1.2.1.10.4.50.36.1.4.1.5ColumnoptixSEPEastPortRoleread-createcurrentThis node indicates the role of the SEP east port. Value 0x10 indicates a common port; value 0x22 indicates the primary edge port; value 0x21 indicates the sec…
1.3.6.1.2.1.10.4.50.36.1.4.1.6ColumnoptixSEPWestBoardIDread-createcurrentThis node indicates the slot ID of the SEP west port. Value 0xffff indicates that no west port is available.
1.3.6.1.2.1.10.4.50.36.1.4.1.7ColumnoptixSEPWestSubcardread-createcurrentThis node indicates the subboard ID of the SEP west port. Value 0xff indicates that no subboard is available.
1.3.6.1.2.1.10.4.50.36.1.4.1.8ColumnoptixSEPWestPortIDread-createcurrentThis node indicates the SEP west port number. Value 0xffff indicates that no west port is available.
1.3.6.1.2.1.10.4.50.36.1.4.1.9ColumnoptixSEPWestPortRoleread-createcurrentThis node indicates the role of the SEP west port. Value 0x10 indicates a common port; value 0x22 indicates the primary edge port; value 0x21 indicates the sec…
1.3.6.1.2.1.10.4.50.36.1.4.1.10ColumnoptixSEPAddSrvVlanNumread-createcurrentThis node indicates the SEP service VLAN quantity, which ranges from 0 to 253. Value 0 indicates that all services on the port are protected.
1.3.6.1.2.1.10.4.50.36.1.4.1.11ColumnoptixSEPAddSrvVlanListread-createcurrentThis node indicates the SEP service VLAN ID list.
1.3.6.1.2.1.10.4.50.36.1.4.1.255ColumnoptixSEPRowStatusread-createcurrentThis node indicates the row status of the SEP creating information table.
1.3.6.1.2.1.10.4.50.36.1.5NodeoptixSEPTrap
1.3.6.1.2.1.10.4.50.36.1.5.1NotificationoptixSEPNBRStateChangeEvtTrapcurrentThis node is used to report the neighbor status change event of SEP.
1.3.6.1.2.1.10.4.50.36.1.5.2NotificationoptixSEPFWDStateChangeEvtTrapcurrentThis node is used to report the forwarding status change event of an SEP port.
1.3.6.1.2.1.10.4.50.36.1.6NodeoptixSEPEvtTrapMember
1.3.6.1.2.1.10.4.50.36.1.6.1ScalaroptixSEPEvtTrapSepIDaccessible-for-notifycurrentThis node indicates the ID of an SEP protected instance.
1.3.6.1.2.1.10.4.50.36.1.6.2ScalaroptixSEPEvtTrapBoardaccessible-for-notifycurrentThis node indicates the slot ID of an SEP port.
1.3.6.1.2.1.10.4.50.36.1.6.3ScalaroptixSEPEvtTrapSubCardaccessible-for-notifycurrentThis node indicates the subboard ID of an SEP port.
1.3.6.1.2.1.10.4.50.36.1.6.4ScalaroptixSEPEvtTrapPortaccessible-for-notifycurrentThis node indicates the SEP port number.
1.3.6.1.2.1.10.4.50.36.1.6.5ScalaroptixSEPEvtTrapNBRStateaccessible-for-notifycurrentThis object indicates the SEP neighbor port status. Value 0 indicates down; value 1 indicates initialized; value 2 indicates preup; value 3 indicates up; value…
1.3.6.1.2.1.10.4.50.36.1.6.6ScalaroptixSEPEvtTrapFWDStateaccessible-for-notifycurrentThis node indicates the SEP port status. Value 0 indicates discarding; value 1 indicates forwarding.