OPTIX-TUNNEL-APS-MIB
32 objects
This module is used to configure and manage theMPLStunnel APS. The MPLS tunnel is protected so the services carried through the tunnel are protected. When the working MPLS tunnel is faulty, services are switched to the protection MPLS tunnel. The PTN equipment supports the 1+1 MPLS tunnel APS and 1:1 MPLS tunnel APS.
Imported Objects
| OPTIX-OID-MIB | optixProvisionPtn |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.50.8 | IdentityoptixTunnelApsMod | This module is used to configure and manage theMPLStunnel APS. The MPLS tunnel is protected so the services carried through the tunnel are protected. When the … | ||
| 1.3.6.1.2.1.10.4.50.8.1 | NodeoptixTunnelApsObject | |||
| 1.3.6.1.2.1.10.4.50.8.1.1 | TableoptixTunnelApsTable | not-accessible | current | This table implements the configurations and status management ofthe tunnel APS. These configurations include APS protection members, the enable status, revert… |
| 1.3.6.1.2.1.10.4.50.8.1.1.1 | RowoptixTunnelApsEntry | not-accessible | current | This entry indicates the PW APSconfiguration table. |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.1 | ColumnoptixTunnelApsId | not-accessible | current | This object indicates the APS protection group ID. |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.2 | ColumnoptixTunnelApsTnlType | read-create | current | This object indicates the APS protectiontunnel type. 1: p2p 2: p2mp |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.3 | ColumnoptixTunnelApsType | read-create | current | This object indicates the APS protection group type. 0: 1 + 1 1: 1:1 |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.4 | ColumnoptixTunnelApsSwitchMode | read-create | current | This object indicates the switching mode of the APS protection group. 0: uni 1: bi |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.5 | ColumnoptixTunnelApsRevertiveMode | read-create | current | This object indicates the revertive mode of the APS protection group. 0: no-revertive 1: revertive |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.6 | ColumnoptixTunnelApsRevertiveTime | read-create | current | This object indicates the recovery time of the APS protection group. Unit: min |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.7 | ColumnoptixTunnelApsHoldoffTime | read-create | current | This object indicates the switching delay time of the APS protection group. Unit: 100 ms |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.8 | ColumnoptixTunnelApsWorkOutTnlIndex | read-create | current | This object indicates the working output APS tunnel index. |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.9 | ColumnoptixTunnelApsWorkInTnlIndex | read-create | current | This object indicates the working input APS tunnel index. |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.10 | ColumnoptixTunnelApsProtectOutTnlIndex | read-create | current | This object indicates the protection output APS tunnel index. |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.11 | ColumnoptixTunnelApsProtectInTnlIndex | read-create | current | This object indicates the protection input APS tunnel index. |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.12 | ColumnoptixTunnelApsEnable | read-create | current | This object indicates the enable status of the APS protection protocol. 1: enable 0: disable |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.13 | ColumnoptixTunnelApsBdiEnable | read-create | current | This object indicates the enable status of the APS protection group BDI. 1: enable 0: disable |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.14 | ColumnoptixTunnelApsGroupState | read-only | current | This object indicates the switching mode of the APS protection group. 1: in-work 0: in-protect |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.15 | ColumnoptixTunnelApsProtoolState | read-only | current | This object indicates the status of the APS protection protocol. |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.16 | ColumnoptixTunnelApsWorkState | read-only | current | This object indicates the working channel status of the APS protection group. 1: valid 0: invalid |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.17 | ColumnoptixTunnelApsProtectState | read-only | current | This object indicates the protection channel status of the APS protection group. 1: valid 0: invalid |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.18 | ColumnoptixTunnelApsExcSwitch | read-create | current | This object indicates that the tunnel APS protection switching is to be triggered. |
| 1.3.6.1.2.1.10.4.50.8.1.1.1.255 | ColumnoptixTunnelApsRowStatus | read-create | current | This object indicates the row status. 1: active4: createAndGo6: destroy |
| 1.3.6.1.2.1.10.4.50.8.2 | NodeoptixTunnelApsTrap | |||
| 1.3.6.1.2.1.10.4.50.8.2.1 | NodeoptixTunnelApsTrapMember | |||
| 1.3.6.1.2.1.10.4.50.8.2.1.1 | ScalaroptixTunnelApsTrapGrouppId | accessible-for-notify | current | This object indicates the APS protection group ID. |
| 1.3.6.1.2.1.10.4.50.8.2.1.2 | ScalaroptixTunnelApsTrapGroupState | accessible-for-notify | current | This object indicates the switching status of the APS protection group. 1: in-work 0: in-protect |
| 1.3.6.1.2.1.10.4.50.8.2.1.3 | ScalaroptixTunnelApsTrapProtoolState | accessible-for-notify | current | This object indicates the status of the APS protection protocol. 0: nrw, 1: nrp, 2: lo, 3: fs, 4: sfw, 5: sfp, 6: sdp, 7: sdw, 8: msw, 9: msp, 10: wtr, 22: dnr… |
| 1.3.6.1.2.1.10.4.50.8.2.1.4 | ScalaroptixTunnelApsTrapWorkState | accessible-for-notify | current | This object indicates the working channel status of the APS protection group. 1: valid 0: invalid |
| 1.3.6.1.2.1.10.4.50.8.2.1.5 | ScalaroptixTunnelApsTrapProtectState | accessible-for-notify | current | This object indicates the protection channel status of the APS protection group. 1: valid 0: invalid |
| 1.3.6.1.2.1.10.4.50.8.2.2 | NodeoptixTunnelApsTrapReport | |||
| 1.3.6.1.2.1.10.4.50.8.2.2.1 | NotificationoptixTunnelApsSwitchTrap | current | This object is used to reporttunnel APS status change events. When the APS protection switching occurs, the status change event must be reported. |