OPTIX-TUNNEL-MIB
94 objects
This module is used to configure and manage MPLS tunnels. The MPLS tunnel is defined in the MPLS protocol, which just provides a channel from the local end to the remote end and has no requirements on the type of encapsulated services carried through the PW.In other words, the data packets are encapsulated to the PW and tagged with MPLS labels for transmission in the MPLS tunnel. The data packets are de-encapsulated at the sink end. The input and output nodes of the MPLS tunnelare called ingress and egressnodes respectively and the intermediate nodesare called transit nodes.As the carrier of the PWs on the network, the MPLS tunnel transparently transmits data packets through the service channel. Multiple types of services can be carried through the MPLS tunnel, such as CES, ATM/IMA, ETH services, and protocol packets. This module describes the configurations of the MPLS tunnel, query of cross-connections, and status reporting.
Imported Objects
| OPTIX-OID-MIB | optixProvisionPtn |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.50.9 | IdentityoptixTunnelMod | This module is used to configure and manage MPLS tunnels. The MPLS tunnel is defined in the MPLS protocol, which just provides a channel from the local end to … | ||
| 1.3.6.1.2.1.10.4.50.9.1 | NodeoptixTunnelObject | |||
| 1.3.6.1.2.1.10.4.50.9.1.1 | ScalaroptixStartLabel | read-write | current | This object indicates the initial value of the space for MPLS global labels on the device. |
| 1.3.6.1.2.1.10.4.50.9.1.2 | ScalaroptixLabelSize | read-write | current | This object indicates the size of the space for MPLS global labels on the device. |
| 1.3.6.1.2.1.10.4.50.9.1.3 | ScalaroptixMultiStartLabel | read-write | current | This object indicates the initial value of the space for MPLS multicast labels on the device. |
| 1.3.6.1.2.1.10.4.50.9.1.4 | ScalaroptixMultiLabelSize | read-write | current | This object indicates the size of the space for MPLS global labels on the device. |
| 1.3.6.1.2.1.10.4.50.9.1.5 | ScalaroptixAvailLabelNum | read-only | current | This object indicates the number of available MPLS labels on the deivce that is queried at one time. The value is always 128. |
| 1.3.6.1.2.1.10.4.50.9.1.6 | ScalaroptixAvailLabelList | read-only | current | This object indicates thelist of available MPLS labels on the deivce that is queried at one time. Each label occupies 4 bytes. |
| 1.3.6.1.2.1.10.4.50.9.1.7 | TableoptixStaticUcTunnelTable | not-accessible | current | This table is used to configure and manage the static unicast MPLS tunnels. The tunnel must be configured on each node along the tunnel. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1 | RowoptixStaticUcTunnelEntry | not-accessible | current | This entry indicates the parameter table for static unicast tunnels. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.1 | ColumnoptixStcUcTnlIndex | not-accessible | current | This object indicates the tunnel index, ranging from 1 to 0x00ffffff,0 means auto. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.2 | ColumnoptixStcUcTnlPosition | read-create | current | This object indicates the tunnel node location. 1: ingress 2: transit 3: egress |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.3 | ColumnoptixStcUcTnldirection | read-create | current | This object indicates the tunnel direction. 0: uni 1: bi |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.4 | ColumnoptixStcUcTnlIngressId | read-create | current | This object indicates the source node ID, which is an unicast address but not a multicast/broadcast/network address/ NE address/loopback address/reserved addre… |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.5 | ColumnoptixStcUcTnlEgressId | read-create | current | This object indicates the sink node ID, which is an unicast address but not a multicast/broadcast/network address/ NE address/loopback address/reserved address… |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.6 | ColumnoptixStcUcTnlTunnelId | read-create | current | This object indicates the tunnel ID, ranging from 1 to 0xffff. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.7 | ColumnoptixStcUcTnlInBid | read-create | current | This object indicates the input slot ID. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.8 | ColumnoptixStcUcTnlInSubBid | read-create | current | This object indicates the input subboard ID. If no subboard is available, the value is 255. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.9 | ColumnoptixStcUcTnlInPortId | read-create | current | This object indicates the input port number. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.10 | ColumnoptixStcUcTnlInLabel | read-create | current | This object indicates the forward ingress label. The corresponding spacecannot exceed that of the unicast label. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.11 | ColumnoptixStcUcTnlOutBid | read-create | current | This object indicates the output slot ID. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.12 | ColumnoptixStcUcTnlOutSubBid | read-create | current | This object indicates the output subboard ID. If no subboard is available, the value is 255. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.13 | ColumnoptixStcUcTnlOutPortId | read-create | current | This object indicates the output port number. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.14 | ColumnoptixStcUcTnlOutLabel | read-create | current | This object indicates the forward egress label. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.15 | ColumnoptixStcUcTnlNextHop | read-create | current | This object indicates the forward next hop address, which is an unicast address, but not a multicast/broadcast/0.0.0.0 address/loopback address/reserved addres… |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.16 | ColumnoptixStcUcTnlRsvInLabel | read-create | current | This object indicates the backward ingress label. The corresponding space cannot exceed that of the unicast label. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.17 | ColumnoptixStcUcTnlRsvOutLabel | read-create | current | This object indicates the backward egress label. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.18 | ColumnoptixStcUcTnlRsvNextHop | read-create | current | This object indicates the backward next hop address, which is an unicast address, but not a multicast/broadcast/0.0.0.0 address/loopback address/reserved addre… |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.19 | ColumnoptixStcUcTnlName | read-create | current | This object indicates the tunnel name. The tunnel name can be null, space, or chinese characters of a maximum of 64 bytes. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.20 | ColumnoptixStcUcTnlBandwidthCIR | read-create | current | Indicates the CIR. 0: The bandwidth is not restricted. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.21 | ColumnoptixStcUcTnlBandwidthCBS | read-create | current | Indicates the CBS. 0: The bandwidth is not restricted. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.22 | ColumnoptixStcUcTnlBandwidthPIR | read-create | current | Indicates the PIR. 0: The bandwidth is not restricted. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.23 | ColumnoptixStcUcTnlBandwidthPBS | read-create | current | Indicates the PBS. 0: The bandwidth is not restricted. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.24 | ColumnoptixStcUcTnlDsType | read-create | current | This object indicates the tunnel schedualing type. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.25 | ColumnoptixStcUcTnlDsCos | read-create | current | This object indicates the tunnel COS value:1:be 2:af1 3:af2 4:af3 5:af4 6:ef 7:cs6 8:cs7 255:null |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.26 | ColumnoptixStcUcTnlExp | read-create | current | This object indicates the tunnel EXP value. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.27 | ColumnoptixStcUcTnlLspMode | read-create | current | This object indicates the LSP mode. 1: uniform 2: pipe |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.28 | ColumnoptixStcUcTnlEnable | read-create | current | Indicates whether an LSP is enabled. 1: enable 0: disable |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.29 | ColumnoptixStcUcTnlVlanId | read-create | current | This object indicates the VLAN ID. Valid values: 1-4094, 0xffff. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.30 | ColumnoptixStcUcTnlVlanpri | read-create | current | This object indicates the VLAN priority. Valid values: 0xff |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.31 | ColumnoptixStcUcTnlState | read-only | current | This object indicates the tunnel status. 0: up 1: down 2: fail (The tunnel cannot be created.) |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.32 | ColumnoptixStcUcTnlBwLimit | read-create | current | This object indicates the tunnel bandwidth limit state. 0:disabel 1:enable |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.33 | ColumnoptixStcUcTnlCheckRet | read-only | current | This object indicates the check result of tunnels. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.34 | ColumnoptixStcUcTnlCT | read-only | current | This object indicates the CT of tunnels. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.35 | ColumnoptixStcUcTnlSetupPri | read-only | current | This object indicates the setup priority of tunnels. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.36 | ColumnoptixStcUcTnlHoldPri | read-only | current | This object indicates the hold priority of tunnels. |
| 1.3.6.1.2.1.10.4.50.9.1.7.1.255 | ColumnoptixStcUcTnlRowStatus | read-create | current | This object indicates the row status. 1: active 4: createAndGo 6: destroy |
| 1.3.6.1.2.1.10.4.50.9.1.8 | TableoptixTunnelCrossTable | not-accessible | current | This table is used to query the actual tunnel forwarding and cross-connect paths. For bidirectional tunnels, there are forward and backward cross-connections. … |
| 1.3.6.1.2.1.10.4.50.9.1.8.1 | RowoptixTunnelCrossEntry | not-accessible | current | This entry is used to query the parameter table for actualtunnel cross-connections. |
| 1.3.6.1.2.1.10.4.50.9.1.8.1.1 | ColumnoptixTunnelIndex | not-accessible | current | This object indicates the tunnel index, ranging from 1 to 0x00ffffff. |
| 1.3.6.1.2.1.10.4.50.9.1.8.1.2 | ColumnoptixTunneldirection | not-accessible | current | This object indicates the cross-connect direction. 1: forward 2: backward |
| 1.3.6.1.2.1.10.4.50.9.1.8.1.3 | ColumnoptixTnlInBid | read-only | current | This object indicates the input slot ID. |
| 1.3.6.1.2.1.10.4.50.9.1.8.1.4 | ColumnoptixTnlInSubBid | read-only | current | This object indicates the input subboard ID. If no subboard is available, the value is 255. |
| 1.3.6.1.2.1.10.4.50.9.1.8.1.5 | ColumnoptixTnlInPortId | read-only | current | This object indicates the input port number. |
| 1.3.6.1.2.1.10.4.50.9.1.8.1.6 | ColumnoptixTnlInLabel | read-only | current | This object indicates the forward ingress label. The corresponding space cannot exceed that of the unicast label. |
| 1.3.6.1.2.1.10.4.50.9.1.8.1.7 | ColumnoptixTnlOutBid | read-only | current | This object indicates the output slot ID. |
| 1.3.6.1.2.1.10.4.50.9.1.8.1.8 | ColumnoptixTnlOutSubBid | read-only | current | This object indicates the output subboard ID. If no subboard is available, the value is 255. |
| 1.3.6.1.2.1.10.4.50.9.1.8.1.9 | ColumnoptixTnlOutPortId | read-only | current | This object indicates the output port number. |
| 1.3.6.1.2.1.10.4.50.9.1.8.1.10 | ColumnoptixTnlOutLabel | read-only | current | This object indicates the forward egress label. |
| 1.3.6.1.2.1.10.4.50.9.1.8.1.11 | ColumnoptixTnlNextHop | read-only | current | This object indicates the forward next hop address, which is an unicast address, but not a multicast/broadcast/0.0.0.0 address/loopback address/reserved addres… |
| 1.3.6.1.2.1.10.4.50.9.1.8.1.12 | ColumnoptixTnlIngressId | read-only | current | This object indicates the source node ID, which is an unicast address, but not a multicast/broadcast/network address/ NE address/loopback address/reserved addr… |
| 1.3.6.1.2.1.10.4.50.9.1.8.1.13 | ColumnoptixTnlEgressId | read-only | current | This object indicates the sink node ID, which is an unicast address, but not a multicast/broadcast/network address/ NE address/loopback address/reserved addres… |
| 1.3.6.1.2.1.10.4.50.9.1.8.1.14 | ColumnoptixTnlTunnelId | read-only | current | This object indicates the tunnel ID, ranging from 1 to 0xffff. |
| 1.3.6.1.2.1.10.4.50.9.1.8.1.15 | ColumnoptixTnlInstance | read-only | current | This object indicates the tunnel channel instance. |
| 1.3.6.1.2.1.10.4.50.9.1.9 | TableoptixTunnelCarryCESNumberTable | not-accessible | current | This table is used to query the number of CES services that can be configured on the free bandwidth. |
| 1.3.6.1.2.1.10.4.50.9.1.9.1 | RowoptixTunnelCarryCESNumberEntry | not-accessible | current | This entry is used to query theinformation table for PWs carried on the tunnel. |
| 1.3.6.1.2.1.10.4.50.9.1.9.1.1 | ColumnoptixCarryCESTunnelIndex | not-accessible | current | This object indicates the tunnel index, ranging from 1 to 0x00ffffff. |
| 1.3.6.1.2.1.10.4.50.9.1.9.1.2 | ColumnoptixCarryCESType | not-accessible | current | This object indcates the PW type. 0x0010: SONET/SDH Circuit Emulation over Packet 0x0011: Structure-agnostic E1 over Packet 0x0015: CESoPSN basic mode |
| 1.3.6.1.2.1.10.4.50.9.1.9.1.3 | ColumnoptixCarryCESLevel | not-accessible | current | This object indicates the service emulation level. 1: VC12 2: VC3 3: VC11 4: VC4 5: VC4 (3 x VC3) |
| 1.3.6.1.2.1.10.4.50.9.1.9.1.4 | ColumnoptixCarryCESPathNumber | not-accessible | current | This object indicates the number of timeslots/channels. |
| 1.3.6.1.2.1.10.4.50.9.1.9.1.5 | ColumnoptixCarryCESRTPEnable | not-accessible | current | This object indicates the enable status of the RTP header encapsulation. 0: disable 1: enablehwrtp 2: enablestdrtp |
| 1.3.6.1.2.1.10.4.50.9.1.9.1.6 | ColumnoptixCarryCESLoadtime | not-accessible | current | This object indicates the packet loading time. Valid values: 125-5000 us; step: 125.For VC4/VC4 (3VC3) CES packets, the loading time is not supported. The valu… |
| 1.3.6.1.2.1.10.4.50.9.1.9.1.7 | ColumnoptixCarryCESIsmspw | not-accessible | current | This object is used to check whether the PW is an MS-PW. 0: no 1: yes |
| 1.3.6.1.2.1.10.4.50.9.1.9.1.8 | ColumnoptixCarryCESSohThorough | not-accessible | current | This object indicates the enabled status of the transmission of section overheads. 0: disable 1: enable (Only for VC4 CES services) |
| 1.3.6.1.2.1.10.4.50.9.1.9.1.9 | ColumnoptixCarryCESLoadbytes | not-accessible | current | This object indicates the number of load bytes. For VC4/VC4 (3 x VC3) CES packets, the loading time is not supported. The value is 0xffff. |
| 1.3.6.1.2.1.10.4.50.9.1.9.1.10 | ColumnoptixCarryCESNumber | read-only | current | This object indicates the number of CES services that can be configured on the free bandwidth of the tunnel/port. |
| 1.3.6.1.2.1.10.4.50.9.2 | NodeoptixTunnelTrap | |||
| 1.3.6.1.2.1.10.4.50.9.2.1 | NodeoptixTunnelTrapMember | |||
| 1.3.6.1.2.1.10.4.50.9.2.1.1 | ScalaroptixStaticUcTunnelStatus | accessible-for-notify | current | This object indicates the changed status of the static tunnel. 0: up, 1: down |
| 1.3.6.1.2.1.10.4.50.9.2.1.2 | ScalaroptixStaticUcTunnelStatusNumber | accessible-for-notify | current | This object indicates the number of tunnels that change their states. Value range: 1 to 200. |
| 1.3.6.1.2.1.10.4.50.9.2.1.3 | ScalaroptixStaticUcTunnelStatusList | accessible-for-notify | current | This object indicates the indexlist of static tunnels that change their states. Each tunnel index occupies four bytes. |
| 1.3.6.1.2.1.10.4.50.9.2.2 | NodeoptixTunnelTrapReport | |||
| 1.3.6.1.2.1.10.4.50.9.2.2.1 | NotificationoptixTunnelStatusTrap | current | This object is used to report the status change events of the static tunnels. When the tunnelsare up/down, the status change events are reported, indicating wh… | |
| 1.3.6.1.2.1.10.4.50.9.3 | NodeoptixTunnelGroup | |||
| 1.3.6.1.2.1.10.4.50.9.3.1 | ScalaroptixTunnelTotalNum | read-only | current | This object indicates the total number of tunnels. One bidirectional tunnel is considered as two tunnels. |
| 1.3.6.1.2.1.10.4.50.9.3.2 | ScalaroptixTunnelInRsvTunl | read-only | current | This object indicates the number of ingress RSVP tunnels. |
| 1.3.6.1.2.1.10.4.50.9.3.3 | ScalaroptixTunnelTrstRsvTunl | read-only | current | This object indicates the number of transit RSVP tunnels. |
| 1.3.6.1.2.1.10.4.50.9.3.4 | ScalaroptixTunnelEgRsvTunl | read-only | current | This object indicates the number of egress RSVP tunnels. |
| 1.3.6.1.2.1.10.4.50.9.3.5 | ScalaroptixTunnelUniInStcTunl | read-only | current | This object indicates the number of unidirectional ingress static tunnels. |
| 1.3.6.1.2.1.10.4.50.9.3.6 | ScalaroptixTunnelUniTrstStcTunl | read-only | current | This object indicates the number of unidirectional transit static tunnels. |
| 1.3.6.1.2.1.10.4.50.9.3.7 | ScalaroptixTunnelUniEgStcTunl | read-only | current | This object indicates the number of unidirectional egress static tunnels. |
| 1.3.6.1.2.1.10.4.50.9.3.8 | ScalaroptixTunnelBiInStcTunl | read-only | current | This object indicates the number of bidirectional ingress static tunnels. |
| 1.3.6.1.2.1.10.4.50.9.3.9 | ScalaroptixTunnelBiTrstTunl | read-only | current | This object indicates the number of bidirectional transit static tunnels. |
| 1.3.6.1.2.1.10.4.50.9.3.10 | ScalaroptixTunnelBiEgStcTunl | read-only | current | This object indicates the number of bidirectional egress static tunnels. |