OPTIX-TUNNEL-OAM-MIB
23 objects
This module is used to configure and manage the MPLStunnel OAM. Thetunnel OAM provides complete fault detection and identification mechanism and network performance monitoringat thetunnel layer. Based on the OAM check result, the equipment determines whether to trigger protection switching.The tunnel OAM enables quick fault detection and identification and service protection.
Imported Objects
| OPTIX-OID-MIB | optixProvisionPtn |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.4.50.10 | IdentityoptixTunnelOamMod | This module is used to configure and manage the MPLStunnel OAM. Thetunnel OAM provides complete fault detection and identification mechanism and network perfor… | ||
| 1.3.6.1.2.1.10.4.50.10.1 | NodeoptixTunnelOamObject | |||
| 1.3.6.1.2.1.10.4.50.10.1.1 | ScalaroptixTunnelOamFdiEnable | read-write | current | This object indicates the enable status of the FDI function on the device. 0: disable 1: enable |
| 1.3.6.1.2.1.10.4.50.10.1.2 | TableoptixTunnelOamTable | not-accessible | current | This table is used to configuretunnel OAM attributes, includingthe tunnel OAM enable status, detection mode, CC detection mode, SD/SF thresholds, and query the… |
| 1.3.6.1.2.1.10.4.50.10.1.2.1 | RowoptixTunnelOamEntry | not-accessible | current | This entry is used to manage tunnel OAM attributes and status. |
| 1.3.6.1.2.1.10.4.50.10.1.2.1.1 | ColumnoptixTunnelOamIndex | not-accessible | current | This object indicates the tunnel OAM index, ranging from 1 to 0x00ffffff. |
| 1.3.6.1.2.1.10.4.50.10.1.2.1.2 | ColumnoptixTunnelOamEnable | read-write | current | This object indicates whether the OAM is enabled. 1: enable 0: disable |
| 1.3.6.1.2.1.10.4.50.10.1.2.1.3 | ColumnoptixTunnelOamCheckWay | read-write | current | This object indicates the OAM detection mode. 1: self 2: manu 255: invalid detection mode This parameter is unconfigurable when the tunnel is a unidirectional … |
| 1.3.6.1.2.1.10.4.50.10.1.2.1.4 | ColumnoptixTunnelOamCcType | read-write | current | This object indicates the CC detection packet type. 1: cv (default value) 2: ffd |
| 1.3.6.1.2.1.10.4.50.10.1.2.1.5 | ColumnoptixTunnelOamCcTime | read-write | current | This object indicates the CC detection packet frequency. When the packet type is cv, the frequency is an invalid value, 0xff. When the packet type is ffd, the … |
| 1.3.6.1.2.1.10.4.50.10.1.2.1.6 | ColumnoptixTunnelOamCcSend | read-write | current | This object indicates the CC start/stop status. 0: disable1: enable 255: invalid This parameter is unconfigurable when the tunnel is a unidirectional egress no… |
| 1.3.6.1.2.1.10.4.50.10.1.2.1.7 | ColumnoptixTunnelOamSf | read-write | current | This object indicates the SF threshold (packet loss rate). Valid values range from 0 to 100. |
| 1.3.6.1.2.1.10.4.50.10.1.2.1.8 | ColumnoptixTunnelOamSd | read-write | current | This object indicates the SD threshold (packet loss rate). Valid values range from 0 to 100. |
| 1.3.6.1.2.1.10.4.50.10.1.2.1.9 | ColumnoptixTunnelOamRevTunnelindex | read-write | current | This object indicates the reverse tunnel index. This parameter is applicable to only when the tunnel serves as an egress node. When the value is 0xffffffff, th… |
| 1.3.6.1.2.1.10.4.50.10.1.2.1.10 | ColumnoptixTunnelOamStandard | read-write | current | This object indicates the OAM protocol standard  1: 1711 2: 1731 |
| 1.3.6.1.2.1.10.4.50.10.1.2.1.255 | ColumnoptixTunnelOamRowStatus | read-write | current | This object indicates the row status. 1: active 6: destroy,destroy indicates clearing the instance's configure.createAndGo is not supported |
| 1.3.6.1.2.1.10.4.50.10.1.3 | TableoptixTunnelOamStateTable | not-accessible | current | This table is used to query thetunnel OAM status. |
| 1.3.6.1.2.1.10.4.50.10.1.3.1 | RowoptixTunnelOamStateEntry | not-accessible | current | This entry is used tomanage the tunnel OAM status. |
| 1.3.6.1.2.1.10.4.50.10.1.3.1.1 | ColumnoptixTunnelOamDirection | not-accessible | current | For bidirectional tunnels, the status query is performaned in two directions, local and remote ends. This object indicates the direction of thetunnel OAM, loca… |
| 1.3.6.1.2.1.10.4.50.10.1.3.1.2 | ColumnoptixTunnelOamState | read-only | current | This object indicates the tunnel OAM status. 0: initialstate, 1: nearendavailable, 2: nearenddefectavailable, 3: nearenddefectunavailable, 4: nearendunavailabl… |
| 1.3.6.1.2.1.10.4.50.10.1.3.1.3 | ColumnoptixTunnelOamDefectType | read-only | current | This object indicates the defect type of the tunnel OAM. 1: dserver, 2: dpeerme, 3: dlocv, 4: dttsimismatch, 5: dttsimismerge, 6: dexcess, 7: dunknown, 255: in… |
| 1.3.6.1.2.1.10.4.50.10.1.3.1.4 | ColumnoptixTunnelOamUnavailableTime | read-only | current | This object indicates the unavailable time of the tunnel. The time ranges from 0 to 300,000 ms. 4294967295: invalid |
| 1.3.6.1.2.1.10.4.50.10.1.3.1.5 | ColumnoptixTunnelOamDefectPosition | read-only | current | This object indicates the position of the tunnel defect: a node identified by IP address. |