Olicom-MIB
266 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.285 | Nodeolicom | |||
| 1.3.6.1.4.1.285.1 | Nodeinfo | |||
| 1.3.6.1.4.1.285.1 | NodeobmCallback | This trap is sent when the device tries to place a OBM callback phonecall to phone number obmCallbackPhoneNumber. Even though the call might be repeated severa… | ||
| 1.3.6.1.4.1.285.1.1 | ScalarinfoHardwareProductId | read-only | mandatory | A string containing the hardware product id. |
| 1.3.6.1.4.1.285.1.2 | ScalarinfoHardwareVersion | read-only | mandatory | A string containing the hardware version. |
| 1.3.6.1.4.1.285.1.3 | ScalarinfoHardwareECOLevel | read-only | mandatory | A string containing the ECO update level. |
| 1.3.6.1.4.1.285.1.4 | ScalarinfoHardwareSerialNumber | read-only | mandatory | A string containing the hardware serial number. |
| 1.3.6.1.4.1.285.1.5 | TableinfoHardwareOptionTable | not-accessible | mandatory | A sequence of hardware options, each a string describing the appropriate option present. |
| 1.3.6.1.4.1.285.1.5.1 | RowinfoHardwareOptionTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.285.1.5.1.1 | ColumninfoHardwareOptionNo | read-only | mandatory | The option number for this option. |
| 1.3.6.1.4.1.285.1.5.1.2 | ColumninfoHardwareOption | read-only | mandatory | A string describing this option. |
| 1.3.6.1.4.1.285.1.6 | ScalarinfoSoftwareProductId | read-only | mandatory | A string containing the software product id. Recommended format is as follows: the string consists of fixed and optional part. Fixed part contains device's sym… |
| 1.3.6.1.4.1.285.1.7 | ScalarinfoSoftwareVersion | read-only | mandatory | A string containing the software version. Recommended format is as follows: the string consists of fixed and optional part. Fixed part contains software versio… |
| 1.3.6.1.4.1.285.1.8 | ScalarinfoSoftwareECOLevel | read-only | mandatory | A string containing the ECO update level. |
| 1.3.6.1.4.1.285.1.9 | TableinfoSoftwareOptionTable | not-accessible | mandatory | A sequence of software options, each a string describing the appropriate option present. |
| 1.3.6.1.4.1.285.1.9.1 | RowinfoSoftwareOptionTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.285.1.9.1.1 | ColumninfoSoftwareOptionNo | read-only | mandatory | The option number for this option. |
| 1.3.6.1.4.1.285.1.9.1.2 | ColumninfoSoftwareOption | read-only | mandatory | A string describing this option. |
| 1.3.6.1.4.1.285.1.10 | TableinfoSoftwareMIBsTable | not-accessible | mandatory | A sequence of MIBs supported by this device. |
| 1.3.6.1.4.1.285.1.10.1 | RowinfoSoftwareMIBsTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.285.1.10.1.1 | ColumninfoSoftwareMIBsNo | read-only | mandatory | The number for this MIB description entry. |
| 1.3.6.1.4.1.285.1.10.1.2 | ColumninfoSoftwareMIBsObjectID | read-only | mandatory | The unique OBJECT IDENTIFIER for this MIB description entry. Olicom specific MIBs have OBJECT IDENTIFIERs that are defined as { ocmibs N }. (See ocmibs section… |
| 1.3.6.1.4.1.285.1.10.1.3 | ColumninfoSoftwareMIBsDescription | read-only | mandatory | A string describing this MIB description entry. |
| 1.3.6.1.4.1.285.1.11 | TableinfoXtraSwTable | not-accessible | optional | This table contains the product IDs and addtional information for the additional files included in a multichunk file. |
| 1.3.6.1.4.1.285.1.11.1 | RowinfoXtraSwEntry | not-accessible | optional | An entry in the infoXtraSwTable. |
| 1.3.6.1.4.1.285.1.11.1.1 | ColumninfoXtraSwIndex | read-only | optional | The entry number in the infoXtraSwTable. |
| 1.3.6.1.4.1.285.1.11.1.2 | ColumninfoXtraSwFileUse | read-only | optional | From the file header: The target for the SW image. |
| 1.3.6.1.4.1.285.1.11.1.3 | ColumninfoXtraSwProductId | read-only | optional | From the file header: The SW product ID. |
| 1.3.6.1.4.1.285.1.11.1.4 | ColumninfoXtraSwVersion | read-only | optional | From the file header: The SW version. |
| 1.3.6.1.4.1.285.1.11.1.5 | ColumninfoXtraSwEcoLevel | read-only | optional | From the file header: The SW ECO level. |
| 1.3.6.1.4.1.285.1.11.1.6 | ColumninfoXtraSwSerialNumber | read-only | optional | From the file header: The SW serial number. |
| 1.3.6.1.4.1.285.1.11.1.7 | ColumninfoXtraSwOptions | read-only | optional | From the file header: A bitmask of SW options. |
| 1.3.6.1.4.1.285.1.12 | TableinfoModuleTable | not-accessible | mandatory | This table describes all the HW modules in a system with multiple modules. |
| 1.3.6.1.4.1.285.1.12.1 | RowinfoModuleEntry | not-accessible | mandatory | A list of information objects for a HW module. |
| 1.3.6.1.4.1.285.1.12.1.1 | ColumninfoModuleIndex | read-only | mandatory | The module index of this module. This is a unique index identifying a hardware module in the switching system. The planar board of a switch box is considered a… |
| 1.3.6.1.4.1.285.1.12.1.2 | ColumninfoModuleHwProductId | read-only | mandatory | A string containing the modules product id (eg. from EEPROM) |
| 1.3.6.1.4.1.285.1.12.1.3 | ColumninfoModuleHwVersion | read-only | mandatory | A string containing the modules version (eg. from EEPROM) |
| 1.3.6.1.4.1.285.1.12.1.4 | ColumninfoModuleHwSerialNumber | read-only | mandatory | A string containing the modules serial no (eg. from EEPROM) |
| 1.3.6.1.4.1.285.1.12.1.5 | ColumninfoModuleBootpromVersion | read-only | mandatory | A string containing the modules bootprom version. An empty string, if no bootprom is present on this module. |
| 1.3.6.1.4.1.285.1.13 | TableinfoSwImageTable | not-accessible | mandatory | This table describes all the SW images in the system. |
| 1.3.6.1.4.1.285.1.13.1 | RowinfoSwImageEntry | not-accessible | mandatory | A list of information objects for SW image. |
| 1.3.6.1.4.1.285.1.13.1.1 | ColumninfoSwImageModuleIndex | read-only | mandatory | The module index of the module on which the SW image reside. |
| 1.3.6.1.4.1.285.1.13.1.2 | ColumninfoSwImageNo | read-only | mandatory | The SW image number, relative to the HW module. |
| 1.3.6.1.4.1.285.1.13.1.3 | ColumninfoSwImageProductId | read-only | mandatory | A string containing the SW images product id. An empty string, if this image is not present or corrupted. |
| 1.3.6.1.4.1.285.1.13.1.4 | ColumninfoSwImageVersion | read-only | mandatory | A string containing the SW images version. An empty string, if this image is not present or corrupted. |
| 1.3.6.1.4.1.285.1.13.1.5 | ColumninfoSwImageDownloadTime | read-only | mandatory | The time when the software image was downloaded to the device. This is measured in seconds since 00:00:00 on 1 January 1970 (i.e. UNIX standard time). |
| 1.3.6.1.4.1.285.2 | NodeobmCallout | This trap is sent when the device tries to place a OBM callout phonecall to phone number obmCalloutPhoneNumber because it was triggered by the event(s) obmCall… | ||
| 1.3.6.1.4.1.285.2 | Nodeocmibs | |||
| 1.3.6.1.4.1.285.2.1 | NodeocmibsBridgeMIB | |||
| 1.3.6.1.4.1.285.2.2 | NodeocmibsCauMIB | |||
| 1.3.6.1.4.1.285.2.3 | NodeocmibsCamMIB | |||
| 1.3.6.1.4.1.285.2.4 | NodeocmibsEhubMIB | |||
| 1.3.6.1.4.1.285.2.5 | NodeocmibsOc8100MIB | |||
| 1.3.6.1.4.1.285.2.6 | NodeocmibsCrossfireAtmMIB | |||
| 1.3.6.1.4.1.285.2.7 | NodeocmibsOc8200MIB | |||
| 1.3.6.1.4.1.285.2.8 | NodeocmibsOc8600MIB | |||
| 1.3.6.1.4.1.285.2.9 | NodeocmibsOc84x0MIB | |||
| 1.3.6.1.4.1.285.2.10 | NodeocmibsLanSwitchMIB | |||
| 1.3.6.1.4.1.285.2.11 | NodeocmibsVlanMIB | |||
| 1.3.6.1.4.1.285.2.12 | NodeocmibsSmartStatusMIB | |||
| 1.3.6.1.4.1.285.2.13 | NodeocmibsCf871xMIB | |||
| 1.3.6.1.4.1.285.2.14 | NodeatmUplinkMIB | |||
| 1.3.6.1.4.1.285.3 | Nodetemporary | |||
| 1.3.6.1.4.1.285.3.1 | NodelmpMib | |||
| 1.3.6.1.4.1.285.4 | Nodeinet | |||
| 1.3.6.1.4.1.285.4.1 | ScalarinetMacAddrForm | read-write | mandatory | This variable controls in which form MAC addresses will be represented. The default is canonical form for ethernet products and non-cannonical for tokenring pr… |
| 1.3.6.1.4.1.285.4.2 | ScalarinetEnableRwho | read-write | mandatory | This variable controls whether the device will send rhwo packets on UDP port 513. The packets include information about pseudo-users logged in. For the Olicom … |
| 1.3.6.1.4.1.285.4.3 | ScalarinetEnableRIP | read-write | mandatory | This variable control whether the device will process RIP (Routing Information Protocol) packets on UDP port 520 to update the IP routing table. The device wil… |
| 1.3.6.1.4.1.285.4.4 | ScalarinetCommunityMaxEntries | read-only | mandatory | The maximum number of community entries allowed in inetCommunityTable. |
| 1.3.6.1.4.1.285.4.5 | TableinetCommunityTable | not-accessible | mandatory | A list of entries for each community which is authorized to access the agent. The maximum number of entries is given by inetCommunityMaxEntries. |
| 1.3.6.1.4.1.285.4.5.1 | RowinetCommunityTableEntry | not-accessible | mandatory | A community entry containing objects pertaining to a network manager which is authorized to access the agent. |
| 1.3.6.1.4.1.285.4.5.1.1 | ColumninetCommunityNo | read-only | mandatory | The entry number in the community table for this community. |
| 1.3.6.1.4.1.285.4.5.1.2 | ColumninetCommunityName | write-only | mandatory | The community name used by the management station to access the agent. An empty community name means that any request regardless of it's community name will be… |
| 1.3.6.1.4.1.285.4.5.1.3 | ColumninetCommunityIPAddress | write-only | mandatory | The IP address of the management station authorized to access the agent. A value of 0.0.0.0 allows every IP node to use the community name. |
| 1.3.6.1.4.1.285.4.5.1.4 | ColumninetCommunityAccess | write-only | mandatory | Controls the access rights of the management station. |
| 1.3.6.1.4.1.285.4.5.1.5 | ColumninetCommunityDelete | write-only | mandatory | Setting this object to a non zero value, deletes the entry for this community entry. |
| 1.3.6.1.4.1.285.4.5.1.6 | ColumninetCommunityIPXAddress | write-only | mandatory | The IPX address of the management station authorized to access the agent. A value of all zeroes allows every IPX node to use the community name. |
| 1.3.6.1.4.1.285.4.5.1.7 | ColumninetCommunityTransportProtocols | write-only | mandatory | This variable defines which transport protocols should be expected to deliver requests for this community. If the bit-value 0x01 is set, UDP/IP is used and the… |
| 1.3.6.1.4.1.285.4.5.1.8 | ColumninetCommunityMACAddress | write-only | mandatory | The MAC address of the management station authorized to access the agent. A value of 000000000000 allows every MAC node to use the community name. |
| 1.3.6.1.4.1.285.4.6 | ScalarinetTrapMaxEntries | read-only | mandatory | The maximum number of network manager entries allowed in inetTrapTable. |
| 1.3.6.1.4.1.285.4.7 | TableinetTrapTable | not-accessible | mandatory | A list of trap entries for each network manager which receives traps from the agent. The maximum number of entries is given by trapMaxEntries. |
| 1.3.6.1.4.1.285.4.7.1 | RowinetTrapTableEntry | not-accessible | mandatory | A trap entry containing objects pertaining to a network manager which receives traps from the agent. |
| 1.3.6.1.4.1.285.4.7.1.1 | ColumninetTrapCommunity | read-write | mandatory | The community name used in traps sent to the management station. |
| 1.3.6.1.4.1.285.4.7.1.2 | ColumninetTrapDestIPAddress | read-write | mandatory | The IP address of the management station to receive traps. Note a value of zero or resetting inetTrapTransportProtocols bit value 0x01 disables IP based traps … |
| 1.3.6.1.4.1.285.4.7.1.3 | ColumninetTrapEventDisableMask | read-write | deprecated | NOTE: This field has been replaced by the controlTrapTable. Bitmask of disabled traps from product-specific network management agents. Each octet within the va… |
| 1.3.6.1.4.1.285.4.7.1.4 | ColumninetTrapDelete | write-only | mandatory | Setting this object to a non-zero value, deletes the entry for the trap destination. |
| 1.3.6.1.4.1.285.4.7.1.5 | ColumninetTrapDestUDPPort | read-write | mandatory | The UDP port on the management station to receive traps. If set to 0 (zero) the default value 162 is used. |
| 1.3.6.1.4.1.285.4.7.1.6 | ColumninetTrapIndex | read-only | mandatory | All entries in the inetTrapTable have a unique index, denoted by this variable. |
| 1.3.6.1.4.1.285.4.7.1.7 | ColumninetTrapDestIPXAddress | read-write | mandatory | The IPX address of the management station to receive traps. Note a value of zero or resetting inetTrapTransportProtocols bit value 0x02 disables IPX based trap… |
| 1.3.6.1.4.1.285.4.7.1.8 | ColumninetTrapTransportProtocols | read-write | mandatory | This variable defines which transport protocols should be used to deliver TRAPs for this trap destination. If the bit-value 0x01 is set, UDP/IP is use and the … |
| 1.3.6.1.4.1.285.4.7.1.9 | ColumninetTrapIPEncapsulation | read-write | mandatory | This variable controls the encapsulation method used when delivering TRAPs via the UDP/IP protocol. NOTE: On TokenRing devices only snap(3) works. ON EtherNet … |
| 1.3.6.1.4.1.285.4.7.1.10 | ColumninetTrapIPXEncapsulation | read-write | mandatory | This variable controls the encapsulation method used when delivering TRAPs via the IPX protocol. NOTE: On TokenRing devices only ieee8022(2) and snap(3) works. |
| 1.3.6.1.4.1.285.4.8 | ScalarinetDefaultIPEncapsulation | read-write | mandatory | This variable controls the default encapsulation method used by this device, when transmitting via the UDP/IP protocol. This default encapsulation method is on… |
| 1.3.6.1.4.1.285.4.9 | ScalarinetDefaultIPXEncapsulation | read-write | mandatory | This variable controls the default encapsulation method used by this device, when transmitting via the IPX protocol. This default encapsulation method is only … |
| 1.3.6.1.4.1.285.4.10 | TableinetIPAddressTable | not-accessible | mandatory | This table contains IP addressing information for each interface. |
| 1.3.6.1.4.1.285.4.10.1 | RowinetIPAddressEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.285.4.10.1.1 | ColumninetIPAddressIfNumber | read-only | mandatory | This number corresponds to the interface number, ifIndex, in ifTable from MIB-II. |
| 1.3.6.1.4.1.285.4.10.1.2 | ColumninetIPAddressIPAddress | read-write | mandatory | This is the IP address associated with the interface. |
| 1.3.6.1.4.1.285.4.10.1.3 | ColumninetIPAddressNetmask | read-write | mandatory | This is the IP netmask associated with the interface. Note: Setting the netmask for one interface may change the netmask for other interfaces. |
| 1.3.6.1.4.1.285.4.10.1.4 | ColumninetIPAddressDefaultGateway | read-write | mandatory | This is the IP default gateway associated with the interface. Note: Setting the default gateway for one interface may change the default gateway for other inte… |
| 1.3.6.1.4.1.285.4.10.1.5 | ColumninetIPAddressEnableRwho | read-write | optional | This variable controls whether the device will send rhwo packets on UDP port 513 on the specified interface. The packets include information about pseudo-users… |
| 1.3.6.1.4.1.285.4.10.1.6 | ColumninetIPAddressEnableRIP | read-write | optional | This variable control whether the device will process RIP (Routing Information Protocol) packets on UDP port 520 on the specified interface to update the IP ro… |
| 1.3.6.1.4.1.285.4.10.1.7 | ColumninetIPAddressIPEncapsulation | read-write | mandatory | This variable controls the IP encapsulation method used on the specified interface. Choosing media-default(4) selects SNAP encapsulation on TokenRing interface… |
| 1.3.6.1.4.1.285.4.11 | ScalarinetSlipBaudrate | read-write | optional | The baud rate used by a SLIP connection. |
| 1.3.6.1.4.1.285.4.12 | ScalarinetSlipParity | read-write | optional | The transmission parity used by a SLIP connection. |
| 1.3.6.1.4.1.285.4.13 | ScalarinetSlipStopbits | read-write | optional | The number of stop bits used by a SLIP connection. |
| 1.3.6.1.4.1.285.4.14 | ScalarinetSlipModemInit | read-write | optional | A string sent to the modem to initialize it prior to establishing a SLIP connection. |
| 1.3.6.1.4.1.285.4.15 | ScalarinetSlipHeaderCompressionEnabled | read-write | optional | Enable or disable compression of the SLIP headers. |
| 1.3.6.1.4.1.285.4.16 | ScalarinetSlipMaxMtuSize | read-write | optional | Maximum Transmit Unit size, that is, the maximum size of a PDU transmitted on a SLIP connection. |
| 1.3.6.1.4.1.285.4.17 | ScalarinetSlipMaxMruSize | read-write | optional | Maximum Receive Unit size, that is, the maximum acceptable size of a PDU received on a SLIP connection. |
| 1.3.6.1.4.1.285.4.18 | ScalarsCallbackEnable | read-write | deprecated | This object controls whether the Olicom Out-Of-Band Management Callback sub-system should be active (enabled) or not. |
| 1.3.6.1.4.1.285.4.19 | ScalarsCallbackPhoneNumber | read-write | deprecated | A string containing the telephone number to be used by the callback sub-system. This string will be sent `as is' to the modem connected to the OBM communicatio… |
| 1.3.6.1.4.1.285.4.20 | ScalarsCalloutEnable | read-write | deprecated | This object controls whether the Olicom Out-Of-Band Management Callout sub-system should be active (enabled) or not. |
| 1.3.6.1.4.1.285.4.21 | ScalarsCalloutPhoneNumber | read-write | deprecated | A string containing the telephone number to be used by the callout sub-system. This string will be sent `as is' to the modem connected to the OBM communication… |
| 1.3.6.1.4.1.285.5 | Nodecontrol | |||
| 1.3.6.1.4.1.285.5.1 | ScalarcontrolRestart | write-only | mandatory | Writing any value other than zero to this variable causes the device program to restart. |
| 1.3.6.1.4.1.285.5.2 | ScalarcontrolConfigChangeCounter | read-write | mandatory | This variable contains the number of times, any part of the configuration has been changed by any of the management systems controlling this device. See the ma… |
| 1.3.6.1.4.1.285.5.3 | TablecontrolTrapTable | not-accessible | mandatory | This table contains an entry for each enterprise-specific TRAP this device is capable of sending. The only writable field in the table is the controlTrapGenera… |
| 1.3.6.1.4.1.285.5.3.1 | RowcontrolTrapTableEntry | not-accessible | mandatory | A controlTrapTableEntry entry contains objects pertaining to one particular enterprise-specific TRAP. |
| 1.3.6.1.4.1.285.5.3.1.1 | ColumncontrolTrapIndex | read-only | mandatory | This variable corresponds to the inetTrapIndex variable in the inetTrapTable. |
| 1.3.6.1.4.1.285.5.3.1.2 | ColumncontrolTrapMIBIndex | read-only | mandatory | This variable identifies the MIB in which this TRAP is defined. The variable is the index of the entry in infoSoftwareMIBsTable that defines the MIB in questio… |
| 1.3.6.1.4.1.285.5.3.1.3 | ColumncontrolTrapNumber | read-only | mandatory | This variable describes in which TRAP in the MIB subtree this TRAP is. |
| 1.3.6.1.4.1.285.5.3.1.4 | ColumncontrolTrapDescription | read-only | mandatory | This variable describes the TRAP. This corresponds to the description field in the MIB text for this TRAP. |
| 1.3.6.1.4.1.285.5.3.1.5 | ColumncontrolTrapGeneration | read-write | mandatory | This variable controls whether this TRAP never(1) is generated or is always(2) generated. |
| 1.3.6.1.4.1.285.5.4 | ScalarcontrolLoadProtocol | read-write | mandatory | This variable defines which protocol should be used for downloading configuration and program code. Notice that a specific Olicom product will typically suppor… |
| 1.3.6.1.4.1.285.5.5 | ScalarcontrolLoadFilename | read-write | mandatory | In the Load protocols where it is relevant this variable contains the name of the file to be downloaded. |
| 1.3.6.1.4.1.285.5.6 | ScalarcontrolLoadServerMACAddress | read-write | optional | This object specifies the MAC address of the Load server used for download. Only used if the Load protocol defined by the controlLoadProtocol variable needs th… |
| 1.3.6.1.4.1.285.5.7 | ScalarcontrolLoadServerIPAddress | read-write | optional | This object specifies the IP address of the Load server used for download. Only used if the Load protocol defined by the controlLoadProtocol variable needs the… |
| 1.3.6.1.4.1.285.5.8 | ScalarcontrolLoadServerIPXAddress | read-write | optional | This object specifies the IPX address of the Load server used for download. Only used if the Load protocol defined by the controlLoadProtocol variable needs th… |
| 1.3.6.1.4.1.285.5.9 | ScalarcontrolLoadStart | read-write | mandatory | Writing any value other than zero to this variable causes a download to start. While reading, it returns the current status of transmission or last transmissio… |
| 1.3.6.1.4.1.285.5.10 | ScalarcontrolTime | read-write | mandatory | The internal clock in the device. This is measured in seconds since 00:00:00 on 1 January 1970 (i.e. UNIX standard time). |
| 1.3.6.1.4.1.285.5.11 | ScalarcontrolEnableRmon | read-write | optional | This object specifies whether RMON probe is enabled or disabled. If the device does not support RMON only disabled is allowed. Setting this variable resets the… |
| 1.3.6.1.4.1.285.5.12 | ScalarcontrolAutoRestart | read-write | optional | This object specifies whether changes to certain fundamental configuration parameters (as specified for the corresponding MIB variables) shall cause the device… |
| 1.3.6.1.4.1.285.5.13 | ScalarcontrolSwAdminStatus | read-write | optional | This object controls the state of the SW images in systems where more than one image is present. In the OC-9100 the state of each image may be: empty(1) - no i… |
| 1.3.6.1.4.1.285.5.15 | ScalarcontrolFlashConfigSize | read-only | optional | The total number of bytes in the configuration FLASH, or rather, in one of the two alternating sections. |
| 1.3.6.1.4.1.285.5.16 | ScalarcontrolFlashConfigFree | read-only | optional | The number of free bytes in the configuration FLASH. |
| 1.3.6.1.4.1.285.5.17 | ScalarcontrolFlashConfigState | read-write | optional | Controls the state of the FLASH configuration. The states are as follows: normal default - The DEFAULT button has been activated. corrupted - The FLASH configu… |
| 1.3.6.1.4.1.285.5.18 | ScalarcontrolDelayedRestart | read-write | mandatory | Writing value n to this variable will cause device to restart after n seconds. Writing zero cancels the reboot. Writing new value when the reboot is already sc… |
| 1.3.6.1.4.1.285.5.19 | ScalarcontrolLoadProggress | read-only | mandatory | Number of bytes transmitted so far. 0 if no transmission is currently in progress. |
| 1.3.6.1.4.1.285.5.20 | ScalarcontrolLoadFileSize | read-only | mandatory | Length of the file being transmitted. 0 if no transmission is currently in progress or if the size is unknown. |
| 1.3.6.1.4.1.285.5.21 | NodecontrolTftpClient | |||
| 1.3.6.1.4.1.285.5.21.1 | ScalarcontrolTftpMaxSessions | read-only | optional | The maximum number of simultaneous sessions this device is able to handle. |
| 1.3.6.1.4.1.285.5.21.2 | ScalarcontrolTftpNextSessionIndex | read-only | optional | The unique identifier of the next free TFTP session. This index should be used for manipulating rows in controlTftpSessionTable. |
| 1.3.6.1.4.1.285.5.21.3 | TablecontrolTftpSessionTable | not-accessible | optional | This table makes it possible to control TFTP sessions performed by the built-in device TFTP client. |
| 1.3.6.1.4.1.285.5.21.3.1 | RowcontrolTftpSessionEntry | not-accessible | mandatory | A list of configuration objects for the TFTP session. |
| 1.3.6.1.4.1.285.5.21.3.1.1 | ColumncontrolTftpSessionIndex | read-only | mandatory | The TFTP session index. |
| 1.3.6.1.4.1.285.5.21.3.1.2 | ColumncontrolTftpSessionRowStatus | read-write | mandatory | The status of this TFTP session entry. The following values are possible: 'active' - TFTP operation is in progress. Setting this object to this value starts th… |
| 1.3.6.1.4.1.285.5.21.3.1.3 | ColumncontrolTftpSessionDirection | read-write | mandatory | The direction of this session's transfer. |
| 1.3.6.1.4.1.285.5.21.3.1.4 | ColumncontrolTftpSessionServerAddress | read-write | mandatory | The IP address of the TFTP server used for the transmission. |
| 1.3.6.1.4.1.285.5.21.3.1.5 | ColumncontrolTftpSessionServerFile | read-write | mandatory | The name of the transferred file on the server side. |
| 1.3.6.1.4.1.285.5.21.3.1.6 | ColumncontrolTftpSessionLocalFile | read-write | mandatory | The name of the transferred file on the switch side. In case of upload switch may ignore this variable. |
| 1.3.6.1.4.1.285.5.21.3.1.7 | ColumncontrolTftpSessionStatus | read-only | mandatory | The status of the session or transmission result when the session was completed. The following values are possible: notInitiated(1) no transfer since this row … |
| 1.3.6.1.4.1.285.5.21.3.1.8 | ColumncontrolTftpSessionProgress | read-only | mandatory | Number of bytes transmitted so far. 0 if no transmission is currently in progress. |
| 1.3.6.1.4.1.285.5.21.3.1.9 | ColumncontrolTftpSessionFileSize | read-only | mandatory | Length of the file being transmitted. 0 if no transmission is currently in progress or if the size is unknown. |
| 1.3.6.1.4.1.285.5.22 | ScalarcontrolRestartType | read-write | mandatory | The type of restart that will be performed after next reboot request. After any kind of reboot the value of this object should be soft(1) regardles of the prev… |
| 1.3.6.1.4.1.285.6 | Nodeobm | |||
| 1.3.6.1.4.1.285.6.1 | ScalarobmEnable | read-write | mandatory | This object controls whether the Olicom Out-Of-Band Management system should be active (enabled) or not. |
| 1.3.6.1.4.1.285.6.2 | ScalarobmPassword | read-write | mandatory | A string containing the password needed to access the device through the OBM communication port. NOTE: Reading the password will return the string `********' -… |
| 1.3.6.1.4.1.285.6.3 | ScalarobmBaudrate | read-write | mandatory | This object controls the baudrate of the communication port used by the Out-of-Band Management system. The 'auto' means automatic UART speed sensing. |
| 1.3.6.1.4.1.285.6.4 | ScalarobmParity | read-write | mandatory | This object controls the parity of the communication port used by the Out-of-Band Management system. |
| 1.3.6.1.4.1.285.6.5 | ScalarobmStopbits | read-write | mandatory | This object controls the number of stopbits of the communication port used by the Out-of-Band Management system. |
| 1.3.6.1.4.1.285.6.6 | ScalarobmModemInit | read-write | mandatory | A string containing the initialization string used to initialize the modem connected to the OBM communication port. This string will be sent `as is'. |
| 1.3.6.1.4.1.285.6.7 | ScalarobmCallbackEnable | read-write | mandatory | This object controls whether the Olicom Out-Of-Band Management Callback sub-system should be active (enabled) or not. |
| 1.3.6.1.4.1.285.6.8 | ScalarobmCallbackPhoneNumber | read-write | mandatory | A string containing the default phone number to be used by the callback sub-system. This string will be sent `as is' to the modem connected to the OBM communic… |
| 1.3.6.1.4.1.285.6.9 | ScalarobmCalloutEnable | read-write | mandatory | This object controls whether the Olicom Out-Of-Band Management Callout sub-system should be active (enabled) or not. |
| 1.3.6.1.4.1.285.6.10 | ScalarobmCalloutPhoneNumber | read-write | mandatory | A string containing the telephone number to be used by the callout sub-system. This string will be sent `as is' to the modem connected to the OBM communication… |
| 1.3.6.1.4.1.285.6.11 | ScalarobmCalloutTriggerEvent | read-write | mandatory | This object controls which events will trigger the callout sub-system to try to establish a connection using the obmCalloutPhoneNumber. The value is a bitmask,… |
| 1.3.6.1.4.1.285.6.12 | ScalarobmCalloutRetries | read-write | mandatory | This value denotes the number of times the callout sub-system will try to establish a connection using the obmCallbackPhoneNumber string. Used also for call-ba… |
| 1.3.6.1.4.1.285.6.13 | ScalarobmCalloutRetryTimer | read-write | mandatory | This value denotes the number of minutes between unsuccesful attempts to establish a connection using the obmCalloutPhoneNumber string. Used also for call-back. |
| 1.3.6.1.4.1.285.6.14 | ScalarobmDelayedRecovery | read-write | mandatory | This object controls whether the Olicom Out-Of-Band Management delayed Recovery sub-system should be active (enabled) or not. On a bridge this is controlled by… |
| 1.3.6.1.4.1.285.6.15 | ScalarobmEnableTelnet | read-write | optional | This object controls whether the Olicom Out-Of-Band Management can be accessed from telnet. |
| 1.3.6.1.4.1.285.6.16 | ScalarobmConnectTimeout | read-write | optional | This value denotes the number of seconds the user must wait after 3 unsuccesfull attempts to enter the correct password. The default value is 60 sec. |
| 1.3.6.1.4.1.285.6.17 | ScalarobmDefaultOperationalMode | read-write | optional | This object controls whether the Olicom Out-Of-Band Management can be accessed via serial console or async PPP/SLIP or selected dynamically (serial or async PP… |
| 1.3.6.1.4.1.285.6.18 | ScalarobmInactivityTimeout | read-write | mandatory | This object controls value of inactivity timeout [min] which will be used to disconnect an idle user from the Out-of-Band Management system. The default value … |
| 1.3.6.1.4.1.285.6.19 | ScalarobmDialType | read-write | mandatory | This object controls if ATDP or ATDT will be sent to a modem while dialing from the Out-of-Band Management system. |
| 1.3.6.1.4.1.285.6.20 | ScalarobmPasswordRead | read-write | mandatory | A string containing the password needed to read-access the device through the OBM communication port. NOTE: Reading the password will return the string `******… |
| 1.3.6.1.4.1.285.6.21 | ScalarobmXonXoffHandshake | read-write | mandatory | The status of Xon/Xoff flow control. |
| 1.3.6.1.4.1.285.6.22 | ScalarobmRtsCtsHandshake | read-write | mandatory | The status of RTS/CTS handshake. |
| 1.3.6.1.4.1.285.6.23 | ScalarobmDatabits | read-only | mandatory | Number of databits to be used by serial interface. |
| 1.3.6.1.4.1.285.7 | Nodemanagement | |||
| 1.3.6.1.4.1.285.7.1 | TablemanagementTable | not-accessible | mandatory | A list of entries for each management system the device supports. NOTE: The SNMP management system is always the first entry in the table. |
| 1.3.6.1.4.1.285.7.1.1 | RowmanagementTableEntry | not-accessible | mandatory | A management entry contains objects pertaining to a network management system which is supported by this device. |
| 1.3.6.1.4.1.285.7.1.1.1 | ColumnmanagementNo | read-only | mandatory | The entry number in the management table for this management system. |
| 1.3.6.1.4.1.285.7.1.1.2 | ColumnmanagementDescription | read-only | mandatory | A descriptive text for this management system (protocol). |
| 1.3.6.1.4.1.285.7.1.1.3 | ColumnmanagementAssociationState | read-only | mandatory | This variable describes the current association between this device and this management system. Some systems are association oriented (e.g. CMIP) and can there… |
| 1.3.6.1.4.1.285.7.1.1.4 | ColumnmanagementPriority | read-only | mandatory | This variable describes the relative priority of the management systems supported by this device. The associated management system with the highest managementP… |
| 1.3.6.1.4.1.285.7.2 | TablemanagementSnmpAccessLogTable | not-accessible | optional | This table contains the history log for the last 10 SNMP managers which have accessed this device. |
| 1.3.6.1.4.1.285.7.2.1 | RowmanagementSnmpAccessLogEntry | not-accessible | optional | An entry in the managementSnmpAccessLogTable. |
| 1.3.6.1.4.1.285.7.2.1.1 | ColumnmanagementSnmpAccessLogIndex | read-only | optional | The number of this entry in the managementSnmpAccessLogTable. |
| 1.3.6.1.4.1.285.7.2.1.2 | ColumnmanagementSnmpAccessLogTimeStamp | read-only | optional | The time at which the SNMP manager last accessed this device. |
| 1.3.6.1.4.1.285.7.2.1.3 | ColumnmanagementSnmpAccessLogIpAddress | read-only | optional | The IP Address of the SNMP manager. |
| 1.3.6.1.4.1.285.7.2.1.4 | ColumnmanagementSnmpAccessLogAccessRights | read-only | optional | Specifies the access rights of the SNMP manager. |
| 1.3.6.1.4.1.285.7.2.1.5 | ColumnmanagementSnmpAccessLogCount | read-only | optional | Specifies the number of times the SNMP manager has accessed this device. |
| 1.3.6.1.4.1.285.7.3 | ScalarmanagementSnmpLastErrorReason | read-only | mandatory | A detailed explanation of why the last SNMP operation failed. It is used by the management station when the SNMP error-status in the response does not fully ex… |
| 1.3.6.1.4.1.285.8 | Nodefrontpanel | |||
| 1.3.6.1.4.1.285.8.1 | ScalarfrontpanelDisplay | read-write | optional | This variable contains the text that is displayed in the device's frontpanel display. |
| 1.3.6.1.4.1.285.8.2 | ScalarfrontpanelKeyboardAccess | read-write | optional | This variable controls whether the keyboard on the device's frontpanel will work. The value enabled(1) means all actions are permitted, status-only(2) means th… |
| 1.3.6.1.4.1.285.8.3 | ScalarfrontpanelErrorcode | read-write | optional | This variable contains the errorcode that is displayed in the device's frontpanel display. |
| 1.3.6.1.4.1.285.8.4 | ScalarfrontpanelErrorLED | read-write | optional | This variable contains the state of the error LED on this device's frontpanel. |
| 1.3.6.1.4.1.285.8.5 | ScalarfrontpanelDefaultDisplay | read-write | optional | The display of the device is capable of showing different status displays with different counters. This variable determines which counter-display should be sho… |
| 1.3.6.1.4.1.285.8.6 | ScalarfrontpanelKeyPress | write-only | optional | Some devices have a front-panel keyboard. This variable may be used to remotely operate the front-panel keyboard. |
| 1.3.6.1.4.1.285.8.7 | TablefrontpanelDisplayLogTable | not-accessible | optional | This table is used to store history logs in the form of a number of display texts, including a corresponding time stamp. |
| 1.3.6.1.4.1.285.8.7.1 | RowfrontpanelDisplayLogEntry | not-accessible | optional | This is an entry in the frontpanelDisplayLogTable. |
| 1.3.6.1.4.1.285.8.7.1.1 | ColumnfrontpanelDisplayLogIndex | read-only | optional | The entry number in the frontpanelDisplayLogTable. In order to ensure that an SNMP GET-NEXT operation produces consistent results, it is recommended that entri… |
| 1.3.6.1.4.1.285.8.7.1.2 | ColumnfrontpanelDisplayLogTimeStamp | read-only | optional | The time at which the entry was made. |
| 1.3.6.1.4.1.285.8.7.1.3 | ColumnfrontpanelDisplayLogDisplayText | read-only | optional | The text string from the front panel display. |
| 1.3.6.1.4.1.285.9 | Nodeproducts | |||
| 1.3.6.1.4.1.285.9.1 | NodetokenRingBridgeSR | |||
| 1.3.6.1.4.1.285.9.2 | NodecontrolledAccessUnit | |||
| 1.3.6.1.4.1.285.9.3 | NodecontrolledAttachmentModule | |||
| 1.3.6.1.4.1.285.9.4 | NodeetherNetAttachmentHUB | |||
| 1.3.6.1.4.1.285.9.5 | NodetokenRingRemoteBridgeAndCAM | |||
| 1.3.6.1.4.1.285.9.6 | NodetokenRingMultiPortBridge | |||
| 1.3.6.1.4.1.285.9.7 | NodedesktopManagementAgent | |||
| 1.3.6.1.4.1.285.9.8 | NodelocalPCBridge | |||
| 1.3.6.1.4.1.285.9.9 | NoderemoteDOSPCBridge | |||
| 1.3.6.1.4.1.285.9.10 | NoderemoteOS2PCBridge | |||
| 1.3.6.1.4.1.285.9.11 | NodetokenRingSwitchOc8100 | |||
| 1.3.6.1.4.1.285.9.12 | NodecrossfireAtmSwitch | |||
| 1.3.6.1.4.1.285.9.13 | NodeethernetSwitchOc8200 | |||
| 1.3.6.1.4.1.285.9.14 | NodetokenRingSwitchOc8600 | |||
| 1.3.6.1.4.1.285.9.15 | NodetokenRingSwitchOc8007 | |||
| 1.3.6.1.4.1.285.9.16 | NodecrossfireAtmSwitchOc8008 | |||
| 1.3.6.1.4.1.285.9.17 | NodefastEthernetSwitchOc8400 | |||
| 1.3.6.1.4.1.285.9.18 | NodefastEthernetSwitchOc8420 | |||
| 1.3.6.1.4.1.285.9.19 | NodelanscoutOc5020 | |||
| 1.3.6.1.4.1.285.9.20 | NodecrossfireAtmSwitchCf9200 | |||
| 1.3.6.1.4.1.285.9.21 | NodecrossfireRouterCf7100 | |||
| 1.3.6.1.4.1.285.9.22 | NodetokenRingSwitchCf8500 | |||
| 1.3.6.1.4.1.285.9.23 | NodeethernetSwitchCf8711 | |||
| 1.3.6.1.4.1.285.9.24 | NodeethernetSwitchCf8720 | |||
| 1.3.6.1.4.1.285.9.25 | NodeethernetSwitchCf8810 | |||
| 1.3.6.1.4.1.285.10 | Nodeerrorlog | |||
| 1.3.6.1.4.1.285.10.1 | TableerrorlogTable | not-accessible | optional | This table contains a number of error log entries from the managed device. |
| 1.3.6.1.4.1.285.10.1.1 | RowerrorlogEntry | not-accessible | optional | |
| 1.3.6.1.4.1.285.10.1.1.1 | ColumnerrorlogNumber | read-only | optional | The number of the entry. |
| 1.3.6.1.4.1.285.10.1.1.2 | ColumnerrorlogTimeStamp | read-only | optional | This variable describes the device's perception of the time when the error occurred. |
| 1.3.6.1.4.1.285.10.1.1.3 | ColumnerrorlogErrorDescription | read-only | optional | This variable contains a description of the error that occurred in this device. |
| 1.3.6.1.4.1.285.10.1.1.4 | ColumnerrorlogErrorData | read-only | optional | This variable contains additional information about the error. |
| 1.3.6.1.4.1.285.10.1.1.5 | ColumnerrorlogTime | read-only | optional | This variable describes the device's conception of the calendar time when the error occurred. This is measured in seconds since 00:00:00 on 1 January 1970 (i.e… |
| 1.3.6.1.4.1.285.10.1.1.6 | ColumnerrorlogTimeRemoved | read-only | optional | This variable describes the device's conception of the calendar time when the error condition disappeared. This is measured in seconds since 00:00:00 on 1 Janu… |
| 1.3.6.1.4.1.285.10.1.1.7 | ColumnerrorlogCategory | read-only | optional | This variable contains the category of the error log |
| 1.3.6.1.4.1.285.10.1.1.8 | ColumnerrorlogSeverity | read-only | optional | This variable contains the severity of the error log |
| 1.3.6.1.4.1.285.10.1.1.9 | ColumnerrorlogPhysicalIf | read-only | optional | This variable contains the physical interface number of the error log, if the log is related to a certain physical interface. Otherwise it will have the value 0 |
| 1.3.6.1.4.1.285.10.1.1.10 | ColumnerrorlogVirtualIf | read-only | optional | This variable contains the virtual interface number of the error log, if the log is related to a certain virtual interface. Otherwise it will have the value 0 |
| 1.3.6.1.4.1.285.10.2 | ScalarerrorlogTraceControl | read-write | optional | The current state of device's trace log area. |
| 1.3.6.1.4.1.285.10.3 | ScalarerrorlogTraceMaskCurrent | read-write | optional | The current trace log mask. The interpretation of this variable is device specific. |
| 1.3.6.1.4.1.285.10.4 | ScalarerrorlogTraceMaskInitial | read-write | optional | The current trace log mask. The interpretation of this variable is device specific. |
| 1.3.6.1.4.1.285.10.5 | ScalarerrorlogTraceMaskOperational | read-write | optional | The current trace log mask. The interpretation of this variable is device specific. |
| 1.3.6.1.4.1.285.10.6 | ScalarerrorlogTraceLogSize | read-write | optional | The size of the trace log area (in bytes). |
| 1.3.6.1.4.1.285.10.7 | TableerrorlogTraceSliceTable | not-accessible | optional | This table provides access to the device's trace log. |
| 1.3.6.1.4.1.285.10.7.1 | RowerrorlogTraceSliceTableEntry | not-accessible | optional | |
| 1.3.6.1.4.1.285.10.7.1.1 | ColumnerrorlogTraceSliceNumber | read-only | optional | The number of this trace log area slice (each of size `errorlogTraceSliceSize'). |
| 1.3.6.1.4.1.285.10.7.1.2 | ColumnerrorlogTraceSliceSize | read-only | optional | The size of this slice of the trace log area. |
| 1.3.6.1.4.1.285.10.7.1.3 | ColumnerrorlogTraceSliceData | read-only | optional | The data in this slice of the trace log area. |
| 1.3.6.1.4.1.285.10.8 | ScalarerrorlogStoredSeverityLevel | read-write | optional | This variable contains the severity level determining which error logs will be written to permanent storage. Any error log with severity higher than or equal t… |
| 1.3.6.1.4.1.285.11 | Nodetrconfig | |||
| 1.3.6.1.4.1.285.11.1 | TabletrconfigTable | not-accessible | optional | This table contains Token Ring configuration information for each interface. |
| 1.3.6.1.4.1.285.11.1.1 | RowtrconfigEntry | not-accessible | optional | |
| 1.3.6.1.4.1.285.11.1.1.1 | ColumntrconfigIfNumber | read-only | optional | This number corresponds to the interface number, ifIndex, in ifTable from MIB-II. |
| 1.3.6.1.4.1.285.11.1.1.2 | ColumntrconfigBurntInAddress | read-only | optional | The burnt-in MAC address for this interface. |
| 1.3.6.1.4.1.285.11.1.1.3 | ColumntrconfigLocalAddress | read-write | optional | The locally administered MAC address for this interface. If locally address MAC addresses are not used, this entry is all zeroes. |
| 1.3.6.1.4.1.285.11.1.1.4 | ColumntrconfigEarlyTokenRelease | read-write | optional | Indicates if early token release is used on the interface. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IPXAddress | OCTET STRING (SIZE (12)) | ||
| MacAddress | OCTET STRING (SIZE (6)) | ||
| RowStatus | INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } |