PAIRGAIN-AGENT-MIB
32 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.927.1.2.1 | NodepgAgentSw | |||
| 1.3.6.1.4.1.927.1.2.1.1 | ScalarpgAgentType | read-only | mandatory | The agent's Unit type. |
| 1.3.6.1.4.1.927.1.2.1.2 | ScalarpgAgentFwVer | read-only | mandatory | The agent's Unit major firmware version number 0=Rev. A, 1=Rev. B, etc. |
| 1.3.6.1.4.1.927.1.2.1.3 | ScalarpgAgentSwVer | read-only | mandatory | The agent's� software version number in string format: 1.1 = major swftware version number 1, minor version 2. For pgAgentType = pgDMU, the format is XX.YY.Z… |
| 1.3.6.1.4.1.927.1.2.1.4 | ScalarpgAgentBootProtocol | read-only | mandatory | Boot protocol used to load the Unit with its image software. |
| 1.3.6.1.4.1.927.1.2.1.5 | ScalarpgAgentBootFile | read-write | mandatory | The name of the boot file that is sent to the file server during boot time. The actual boot protocol used to retrieve the file is determined by pgAgentBootProt… |
| 1.3.6.1.4.1.927.1.2.1.6 | ScalarpgAgentAuthTraps | read-write | mandatory | Enable or disable the use of authentication error trap generation. |
| 1.3.6.1.4.1.927.1.2.1.7 | ScalarpgAgentTraps | read-write | mandatory | Enable or disable the use of all trap generation. |
| 1.3.6.1.4.1.927.1.2.1.8 | ScalarpgAgentMibLevel | read-only | mandatory | Used to determine current MIB release supported by agent. The encoding of this object is of the following form: xyy, where x is the major version number and yy… |
| 1.3.6.1.4.1.927.1.2.1.9 | ScalarpgAgentMySlotId | read-only | mandatory | Slot where this agent currently resides. If hardware is unable to determine then a 0 should be returned. This object is useful if multiple management units are… |
| 1.3.6.1.4.1.927.1.2.2 | NodepgAgentNetProtocol | |||
| 1.3.6.1.4.1.927.1.2.2.1 | ScalarpgAgentIpAddr | read-write | mandatory | The network management unit's administrative IP address. The current operational IP address can be obtained by the ipAdEntAddr entry in the ipAddrTable. |
| 1.3.6.1.4.1.927.1.2.2.2 | ScalarpgAgentNetMask | read-write | mandatory | The network management unit�s administrative subnet mask. The current operational subnet mask can be obtained by the ipAdEntNetMask entry in the ipAddrTable. |
| 1.3.6.1.4.1.927.1.2.2.3 | ScalarpgAgentDefaultGateway | read-write | mandatory | The network management unit�s administrative default gateway IP address. The current operational default gateway's IP address can be obtained from the ipRout… |
| 1.3.6.1.4.1.927.1.2.2.4 | ScalarpgAgentBootServerAddr | read-write | mandatory | The IP address to which the requests for boot files are sent. The protocol used to retrieve the boot files is determined by object pgAgentBootProtocol. |
| 1.3.6.1.4.1.927.1.2.3 | NodepgSnmpAgent | |||
| 1.3.6.1.4.1.927.1.2.3.1 | TablepgAgentTrapReceiverTable | not-accessible | optional | Table containing list of NMS's that are to receive traps generated by this agent. |
| 1.3.6.1.4.1.927.1.2.3.1.1 | RowpgAgentTrapReceiverEntry | not-accessible | optional | A destination address and community string to a particular trap server, along with a trap filter and entry aging capability. |
| 1.3.6.1.4.1.927.1.2.3.1.1.1 | ColumnpgAgentTrapRcvrStatus | read-write | optional | Setting this object to the value invalid(3) has the effect of invalidating the corresponding entry in the pgAgentTrapReceiverTable. That is, it effectively dis… |
| 1.3.6.1.4.1.927.1.2.3.1.1.2 | ColumnpgAgentTrapRcvrNetAddress | read-write | optional | IP address for trap server that is to receive the trap. |
| 1.3.6.1.4.1.927.1.2.3.1.1.3 | ColumnpgAgentTrapRcvrComm | read-write | optional | Community string used for traps sent to this trap receiver. |
| 1.3.6.1.4.1.927.1.2.4 | NodepgAgentHw | |||
| 1.3.6.1.4.1.927.1.2.4.1 | ScalarpgAgentReset | read-write | mandatory | Network management unit reset status. Writing a reset(2) to this object will reset the agent and perform a download and restart. |
| 1.3.6.1.4.1.927.1.2.4.2 | ScalarpgAgentRestart | read-write | optional | Network management unit restart status. Writing a restart(2) to this object will restart the agent. This initializes all the counters, re-reads the NVRAM data … |
| 1.3.6.1.4.1.927.1.2.4.3 | ScalarpgAgentBootMode | read-write | mandatory | The method for obtaining boot parameter information. This parameter will not take effect until written into NVRAM (pgAgentWriteNvram) and a reset (pgAgentReset… |
| 1.3.6.1.4.1.927.1.2.4.4 | ScalarpgAgentWriteNvram | read-write | mandatory | Network management unit NVRAM write status. Writing a (2) to this object will write the contents of current NVRAM data structure in the NVRAM. |
| 1.3.6.1.4.1.927.1.2.5 | NodepgAgentLocImage | |||
| 1.3.6.1.4.1.927.1.2.5.1 | ScalarpgLocImageValid | read-only | optional | This indicates whether the agent has a valid local code image on board. A FLASH checksum failure would cause the agent to return localImageInvalid(3). |
| 1.3.6.1.4.1.927.1.2.5.2 | ScalarpgLocImageVersion | read-only | optional | The major and minor software version number of the locally-stored image in string format. This object applies only to agents with valid local image. Other agen… |
| 1.3.6.1.4.1.927.1.2.5.3 | ScalarpgLocImageLoadMode | read-write | optional | This indicates whether the agent should get code from the network, use a local image, or try the network first and then fall back to local image if the network… |
| 1.3.6.1.4.1.927.1.2.5.4 | ScalarpgLocImageActualSource | read-only | optional | This indicates whether the agent loaded code from the network or used a local image. When the the ImageLoadMode is localAsBackup, this variable indicates wheth… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |