PANDATEL-GMD-MODEM-MIB
25 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.760.1.1.2.1.10.203 | Nodegmd | |||
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1 | TablegmdModemTable | not-accessible | mandatory | This table contains information about all GM-D modems in all racks. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1 | RowgmdTableEntry | not-accessible | mandatory | The index of the table. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.1 | ColumnmdmRack | read-only | mandatory | The index of the rack where the modem is installed. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.2 | ColumnmdmModem | read-only | mandatory | This entry displays the slot number where the corresponding modem is installed in the rack. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.3 | ColumnmdmPosition | read-only | mandatory | This entry displays the location of the corresponding modem: 'local' or 'remote'. The modem which is plugged into a managed rack is 'local', the counterpart is… |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.5 | ColumnmdmModemName | read-only | mandatory | The verbal name of this modem. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.6 | ColumnmdmDataEquipmentEmulation | read-only | mandatory | Interface mode of the unit: 'dte' or 'dce'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.7 | ColumnmdmModemProperty | read-only | mandatory | This entry displays the speed class of the GM-D: 'e1'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.10 | ColumnmdmHDSLUnit | read-only | mandatory | HDSL unit type: Line Termination Unit ('LTU') or Network Termination Unit ('NTU') |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.23 | ColumnmdmClockSystem | read-write | mandatory | The clock system of the link: 'dual' or 'single'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.24 | ColumnmdmClockSource | read-write | mandatory | The clock source of the link: 'internal', 'external', or 'remote'. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.25 | ColumnmdmDataRate | read-write | mandatory | The data rate at the interface in bits per seconds. The data rate at the remote counterpart changes simultaneously. A data rate of 2.048 Mbps (E1) automaticall… |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.26 | ColumnmdmStartChannel | read-write | mandatory | This entry determines the start channel for framing. Start channel and data rate must match. A start channel which is too high will be ignored. The remote unit… |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.40 | ColumnmdmTimeslot16 | read-write | mandatory | This entry enables or disables time slot 16. If it is disabled, it will not be used for data transmission but for framing. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.41 | ColumnmdmCRC4Generation | read-write | mandatory | This entry enables or disables the generation of a CRC4 check sum. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.62 | ColumnmdmHDSLFramer | read-write | mandatory | This entry enables or disables HDSL framing. The remote unit's configuration changes simultaneously. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.100 | ColumnmdmCRC6Test | read-write | mandatory | This entry enables the execution of a CRC6 test. Write requests with values other than 'start' or 'stop' will be rejected. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.101 | ColumnmdmPair1CRC6Status | read-only | mandatory | This entry indicates the status of the CRC6 test at pair 1. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.102 | ColumnmdmPair1CRC6Error | read-only | mandatory | This entry indicates the number of errors detected during the last 60 seconds at pair 1. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.103 | ColumnmdmPair2CRC6Status | read-only | mandatory | This entry indicates the status of the CRC6 test at pair 2. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.104 | ColumnmdmPair2CRC6Error | read-only | mandatory | This entry indicates the number of errors detected during the last 60 seconds at pair 2. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.105 | ColumnmdmPair3CRC6Status | read-only | mandatory | This entry indicates the status of the CRC6 test at pair 3. |
| 1.3.6.1.4.1.760.1.1.2.1.10.203.1.1.106 | ColumnmdmPair3CRC6Error | read-only | mandatory | This entry indicates the number of errors detected during the last 60 seconds at pair 3. |
| 1.3.6.1.4.1.760.1.1.2.1.10.10000.2.203 | Nodegmd-modem |