PEA-IF-IPDSLAM
40 objects
The IP DSLAM software supports a number of standard and proprietary MIBs. Contains the objects for controlling and managing the ADSL interfaces. The MIB is a subset of the IF-MIB, (described in RFC2863), where the objects implemented in the IP DSLAM are copies of the standardized objects. The only reason for not using the standard interface MIB, is that the management system are polling interfaces, and too many interfaces in the IP DSLAM would reduce the number of IP DSLAMs to be managed by one collection station. The currently implemented management system cannot avoid polling all interfaces. Naming convention: 'adsl' was added in front of the parameter name from IF-MIB.
Imported Objects
| DIESEL-SMI | peaIpDslam |
| IANAifType-MIB | IANAifType |
| IF-MIB | OwnerString |
| PEA-BRIDGE-IPDSLAM | lineIndex |
| PEM-STANDARD | 733 header for the traps managedObjectClass eventTime eventTypePem managedObjectInstance perceivedSeverity probableCause sequenceNumber |
| PEM-STANDARD-TC | IANAItuProbableCause |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | AutonomousType DisplayString PhysAddress TestAndIncr TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 0.0 | ScalaradslIfTestCode | read-only | current | |
| 0.0 | ScalaradslIfTestType | read-write | current | |
| 0.0 | NodenoTest | |||
| 0.0 | NodetestCodeUnknown | |||
| 1.3.6.1.4.1.193.72.300.50 | IdentitypeaIfIpDslam | The IP DSLAM software supports a number of standard and proprietary MIBs. Contains the objects for controlling and managing the ADSL interfaces. The MIB is a s… | ||
| 1.3.6.1.4.1.193.72.300.50.1 | NodeadslIfObjects | |||
| 1.3.6.1.4.1.193.72.300.50.1.1 | ScalaradslIfTableLastChange | read-only | current | The value of sysUpTime at the time of the last creation or deletion of an entry in the adslIfTable. If the number of entries has been unchanged since the last … |
| 1.3.6.1.4.1.193.72.300.50.1.2 | TableadslIfTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of lineIndex. |
| 1.3.6.1.4.1.193.72.300.50.1.2.1 | RowadslIfEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.193.72.300.50.1.2.1.1 | ColumnadslIfDescr | read-only | current | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the i… |
| 1.3.6.1.4.1.193.72.300.50.1.2.1.2 | ColumnadslIfType | read-only | current | The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifTy… |
| 1.3.6.1.4.1.193.72.300.50.1.2.1.3 | ColumnadslIfSpeed | read-only | current | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.4.1.193.72.300.50.1.2.1.4 | ColumnadslIfPhysAddress | read-only | current | The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-spec… |
| 1.3.6.1.4.1.193.72.300.50.1.2.1.5 | ColumnadslIfAdminStatus | read-write | current | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces… |
| 1.3.6.1.4.1.193.72.300.50.1.2.1.6 | ColumnadslIfOperStatus | read-only | current | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If adslIfAdminStatus is down(2) then … |
| 1.3.6.1.4.1.193.72.300.50.1.2.1.7 | ColumnadslIfLastChange | read-only | current | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of… |
| 1.3.6.1.4.1.193.72.300.50.1.3 | TableadslIfXTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of lineIndex. This table contains additional objects for the interface table. |
| 1.3.6.1.4.1.193.72.300.50.1.3.1 | RowadslIfXEntry | not-accessible | current | An entry containing additional management information applicable to a particular interface. |
| 1.3.6.1.4.1.193.72.300.50.1.3.1.1 | ColumnadslIfName | read-only | current | The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use … |
| 1.3.6.1.4.1.193.72.300.50.1.3.1.14 | ColumnadslIfLinkUpDownTrapEnable | read-write | current | Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which d… |
| 1.3.6.1.4.1.193.72.300.50.1.3.1.15 | ColumnadslIfHighSpeed | read-only | current | An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface i… |
| 1.3.6.1.4.1.193.72.300.50.1.3.1.17 | ColumnadslIfConnectorPresent | read-only | current | This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise. |
| 1.3.6.1.4.1.193.72.300.50.1.4 | TableadslIfTestTable | not-accessible | current | This table contains one entry per interface. It defines objects which allow a network manager to instruct an agent to test an interface for various faults. Tes… |
| 1.3.6.1.4.1.193.72.300.50.1.4.1 | RowadslIfTestEntry | not-accessible | current | An entry containing objects for invoking tests on an interface. |
| 1.3.6.1.4.1.193.72.300.50.1.4.1.1 | ColumnadslIfTestId | read-write | current | This object identifies the current invocation of the interface's test. |
| 1.3.6.1.4.1.193.72.300.50.1.4.1.2 | ColumnadslIfTestStatus | read-write | current | This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object i… |
| 1.3.6.1.4.1.193.72.300.50.1.4.1.4 | ColumnadslIfTestResult | read-only | current | This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this … |
| 1.3.6.1.4.1.193.72.300.50.1.4.1.6 | ColumnadslIfTestOwner | read-write | current | The entity which currently has the 'ownership' required to invoke a test on this interface. |
| 1.3.6.1.4.1.193.72.300.50.1.4.1.7 | ColumnadslIfTestError | read-only | current | ITU probable cause values as per [M.3100], [X.733] and [X.736]. |
| 1.3.6.1.4.1.193.72.300.50.2 | NodeadslIfTraps | |||
| 1.3.6.1.4.1.193.72.300.50.2.0 | NodeadslIfTrapsEntry | |||
| 1.3.6.1.4.1.193.72.300.50.2.0.1 | NotificationlinkDown | current | A linkDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the adslIfOperStatus object for one of its communication links is … | |
| 1.3.6.1.4.1.193.72.300.50.2.0.2 | NotificationlinkUp | current | A linkUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the adslIfOperStatus object for one of its communication links left … | |
| 1.3.6.1.4.1.193.72.300.50.3 | NodeadslIfObjectsGoups | |||
| 1.3.6.1.4.1.193.72.300.50.3.1 | GroupadslIfTableLastChangeGroup | current | Objects for the adslIfTableLastChange Group | |
| 1.3.6.1.4.1.193.72.300.50.3.2 | GroupadslIfGroup | current | Objects for the AdslIf Group | |
| 1.3.6.1.4.1.193.72.300.50.3.3 | GroupadslIfXGroup | current | Objects for the adslIfX Group | |
| 1.3.6.1.4.1.193.72.300.50.3.4 | GroupadslIfTestGroup | current | Objects for the adslIfTest Group | |
| 1.3.6.1.4.1.193.72.300.50.4 | NodeadslIfTrapsGoups | |||
| 1.3.6.1.4.1.193.72.300.50.4.1 | GroupadslIfTrapsGoup | current | Notifications Group |