PKTC-IETF-SIG-MIB
136 objects
This MIB module supplies the basic management objects for the PacketCable and IPCablecom Signaling protocols. This version of the MIB includes common signaling and Network Call Signaling (NCS)-related signaling objects. Copyright (C) The IETF Trust (2008). This version of this MIB module is part of RFC 5098; see the RFC itself for full legal notices.
Imported Objects
| DIFFSERV-DSCP-TC | Dscp |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Integer32 mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.169 | IdentitypktcIetfSigMib | This MIB module supplies the basic management objects for the PacketCable and IPCablecom Signaling protocols. This version of the MIB includes common signaling… | ||
| 1.3.6.1.2.1.169.0 | NodepktcSigNotification | |||
| 1.3.6.1.2.1.169.1 | NodepktcSigMibObjects | |||
| 1.3.6.1.2.1.169.1.1 | NodepktcSigDevObjects | |||
| 1.3.6.1.2.1.169.1.1.1 | TablepktcSigDevCodecTable | not-accessible | current | This table describes the MTA-supported codec types. An MTA MUST populate this table with all possible combinations of codecs it supports for simultaneous opera… |
| 1.3.6.1.2.1.169.1.1.1.1 | RowpktcSigDevCodecEntry | not-accessible | current | Each entry represents the maximum number of active connections with a particular codec the MTA is capable of supporting. Each row is indexed by a composite key… |
| 1.3.6.1.2.1.169.1.1.1.1.1 | ColumnpktcSigDevCodecComboIndex | not-accessible | current | The index value that enumerates a particular codec combination in the pktcSigDevCodecTable. |
| 1.3.6.1.2.1.169.1.1.1.1.2 | ColumnpktcSigDevCodecType | not-accessible | current | A codec type supported by this MTA. |
| 1.3.6.1.2.1.169.1.1.1.1.3 | ColumnpktcSigDevCodecMax | read-only | current | The maximum number of simultaneous sessions of a particular codec that the MTA can support. |
| 1.3.6.1.2.1.169.1.1.2 | ScalarpktcSigDevEchoCancellation | read-only | current | This object specifies if the device is capable of echo cancellation. The MTA MUST set this MIB object to a value of true(1) if it is capable of echo cancellati… |
| 1.3.6.1.2.1.169.1.1.3 | ScalarpktcSigDevSilenceSuppression | read-only | current | This object specifies if the device is capable of silence suppression (as a result of Voice Activity Detection). The MTA MUST set this MIB object to a value of… |
| 1.3.6.1.2.1.169.1.1.4 | ScalarpktcSigDevCidSigProtocol | read-write | current | This object is used to configure the subscriber-line protocol used for signaling on-hook caller id information. Different countries define different caller id … |
| 1.3.6.1.2.1.169.1.1.5 | ScalarpktcSigDevR0Cadence | read-write | current | This object specifies ring cadence 0 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.6 | ScalarpktcSigDevR1Cadence | read-write | current | This object specifies ring cadence 1 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.7 | ScalarpktcSigDevR2Cadence | read-write | current | This object specifies ring cadence 2 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.8 | ScalarpktcSigDevR3Cadence | read-write | current | This object specifies ring cadence 3 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.9 | ScalarpktcSigDevR4Cadence | read-write | current | This object specifies ring cadence 4 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.10 | ScalarpktcSigDevR5Cadence | read-write | current | This object specifies ring cadence 5 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.11 | ScalarpktcSigDevR6Cadence | read-write | current | This object specifies ring cadence 6 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.12 | ScalarpktcSigDevR7Cadence | read-write | current | This object specifies ring cadence 7 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.13 | ScalarpktcSigDevRgCadence | read-write | current | This object specifies ring cadence rg (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.14 | ScalarpktcSigDevRsCadence | read-write | current | This object specifies ring cadence rs (a user-defined field). The MTA MUST reject any attempt to make this object repeatable. The value of this MIB object MUST… |
| 1.3.6.1.2.1.169.1.1.15 | ScalarpktcSigDefCallSigDscp | read-write | current | The default value used in the IP header for setting the Differentiated Services Code Point (DSCP) value for call signaling. The value of this MIB object MUST N… |
| 1.3.6.1.2.1.169.1.1.16 | ScalarpktcSigDefMediaStreamDscp | read-write | current | This object contains the default value used in the IP header for setting the Differentiated Services Code Point (DSCP) value for media stream packets. The MTA … |
| 1.3.6.1.2.1.169.1.1.17 | TablepktcSigCapabilityTable | not-accessible | current | This table describes the signaling types supported by this MTA. |
| 1.3.6.1.2.1.169.1.1.17.1 | RowpktcSigCapabilityEntry | not-accessible | current | Entries in pktcMtaDevSigCapabilityTable - list of supported signaling types, versions, and vendor extensions for this MTA. Each entry in the list provides for … |
| 1.3.6.1.2.1.169.1.1.17.1.1 | ColumnpktcSigCapabilityIndex | not-accessible | current | The index value that uniquely identifies an entry in the pktcSigCapabilityTable. |
| 1.3.6.1.2.1.169.1.1.17.1.2 | ColumnpktcSigCapabilityType | read-only | current | This object identifies the type of signaling used. This value has to be associated with a single signaling version. |
| 1.3.6.1.2.1.169.1.1.17.1.3 | ColumnpktcSigCapabilityVersion | read-only | current | Provides the version of the signaling type - reference pktcSigCapabilityType. Examples would be 1.0 or 2.33 etc. |
| 1.3.6.1.2.1.169.1.1.17.1.4 | ColumnpktcSigCapabilityVendorExt | read-only | current | The vendor extension allows vendors to provide a list of additional capabilities. The syntax for this MIB object in ABNF ([RFC5234]) is specified to be zero or… |
| 1.3.6.1.2.1.169.1.1.18 | ScalarpktcSigDefNcsReceiveUdpPort | read-only | current | This object contains the MTA User Datagram Protocol (UDP) receive port that is being used for NCS call signaling. This object should only be changed by the con… |
| 1.3.6.1.2.1.169.1.1.19 | ScalarpktcSigPowerRingFrequency | read-only | current | This object must only be provided via the configuration file during the provisioning process. The power ring frequency is the frequency at which the sinusoidal… |
| 1.3.6.1.2.1.169.1.1.20 | TablepktcSigPulseSignalTable | not-accessible | current | The Pulse signal table defines the pulse signal operation. There are nine types of international pulse signals, with each signal having a set of provisionable … |
| 1.3.6.1.2.1.169.1.1.20.1 | RowpktcSigPulseSignalEntry | not-accessible | current | This object defines the set of parameters associated with each particular value of pktcSigPulseSignalType. Each entry in the pktcSigPulseSignalTable is indexed… |
| 1.3.6.1.2.1.169.1.1.20.1.1 | ColumnpktcSigPulseSignalType | not-accessible | current | There are nine types of international pulse signals. These signals are defined as follows: initial ring pulse loop close pulse loop open enable meter pulse met… |
| 1.3.6.1.2.1.169.1.1.20.1.2 | ColumnpktcSigPulseSignalFrequency | read-write | current | This object is only applicable to the initialRing, enableMeterPulse, and meterPulseBurst signal types. This object identifies the frequency of the generated si… |
| 1.3.6.1.2.1.169.1.1.20.1.3 | ColumnpktcSigPulseSignalDbLevel | read-write | current | This object is only applicable to the enableMeterPulse and meterPulseBurst signal types. This is the decibel level for each frequency at which tones could be g… |
| 1.3.6.1.2.1.169.1.1.20.1.4 | ColumnpktcSigPulseSignalDuration | read-write | current | This object specifies the pulse duration for each signal type. In addition, the MTA must accept the values in the incremental steps specific for each signal ty… |
| 1.3.6.1.2.1.169.1.1.20.1.5 | ColumnpktcSigPulseSignalPulseInterval | read-write | current | This object specifies the repeat interval, or the period, for each signal type. In addition, the MTA must accept the values in the incremental steps specific f… |
| 1.3.6.1.2.1.169.1.1.20.1.6 | ColumnpktcSigPulseSignalRepeatCount | read-write | current | This object specifies how many times to repeat a pulse. This object is not used by the enableMeterPulse signal type, and in that case, the value is irrelevant.… |
| 1.3.6.1.2.1.169.1.1.21 | ScalarpktcSigDevCidMode | read-write | current | For on-hook caller id, pktcSigDevCidMode selects the method for representing and signaling caller identification. For the duringRingingETS method, the Frequenc… |
| 1.3.6.1.2.1.169.1.1.22 | ScalarpktcSigDevCidAfterRing | read-write | current | This object specifies the delay between the end of first ringing pattern and the start of the transmission of the FSK or DTMF containing the caller id informat… |
| 1.3.6.1.2.1.169.1.1.23 | ScalarpktcSigDevCidAfterDTAS | read-write | current | This object specifies the delay between the end of the Dual Tone Alert Signal (DT-AS) and the start of the transmission of the FSK or DTMF containing the calle… |
| 1.3.6.1.2.1.169.1.1.24 | ScalarpktcSigDevCidAfterRPAS | read-write | current | This object specifies the delay between the end of the Ring Pulse Alert Signal (RP-AS) and the start of the transmission of the FSK or DTMF containing the call… |
| 1.3.6.1.2.1.169.1.1.25 | ScalarpktcSigDevRingAfterCID | read-write | current | This object specifies the delay between the end of the complete transmission of the FSK or DTMF containing the caller id information and the start of the first… |
| 1.3.6.1.2.1.169.1.1.26 | ScalarpktcSigDevCidDTASAfterLR | read-write | current | This object specifies the delay between the end of the Line Reversal and the start of the Dual Tone Alert Signal (DT-AS). This object is only used when pktcSig… |
| 1.3.6.1.2.1.169.1.1.27 | ScalarpktcSigDevVmwiMode | read-write | current | For visual message waiting indicator (VMWI), pktcSigDevVmwiMode selects the alerting signal method. For the dtAsETS, rpAsETS, lrAsETS, osi, and lrETS methods, … |
| 1.3.6.1.2.1.169.1.1.28 | ScalarpktcSigDevVmwiAfterDTAS | read-write | current | This object specifies the delay between the end of the Dual Tone Alert Signal (DT-AS) and the start of the transmission of the FSK or DTMF containing the VMWI … |
| 1.3.6.1.2.1.169.1.1.29 | ScalarpktcSigDevVmwiAfterRPAS | read-write | current | This object specifies the delay between the end of the Ring Pulse Alert Signal (RP-AS) and the start of the transmission of the FSK or DTMF containing the VMWI… |
| 1.3.6.1.2.1.169.1.1.30 | ScalarpktcSigDevVmwiDTASAfterLR | read-write | current | This object specifies the delay between the end of the Line Reversal and the start of the Dual Tone Alert Signal (DT-AS) for VMWI information. This object is o… |
| 1.3.6.1.2.1.169.1.1.31 | TablepktcSigDevRingCadenceTable | not-accessible | current | Cadence rings are defined by the telco governing body for each country. The MTA must be able to support various ranges of cadence patterns and cadence periods.… |
| 1.3.6.1.2.1.169.1.1.31.1 | RowpktcSigDevRingCadenceEntry | not-accessible | current | Each entry in this row corresponds to a ring cadence that is being supported by the device. The conceptual rows MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.31.1.1 | ColumnpktcSigDevRingCadenceIndex | not-accessible | current | A unique value ranging from 0 to 127 that corresponds to the value sent by the LE based on country-specific cadences, one row per cadence cycle. In any given s… |
| 1.3.6.1.2.1.169.1.1.31.1.2 | ColumnpktcSigDevRingCadence | read-write | current | This is the Ring Cadence. |
| 1.3.6.1.2.1.169.1.1.32 | TablepktcSigDevToneTable | not-accessible | current | The Tone Table defines the composition of tones and various tone operations. The definition of the tones callWaiting1 through callWaiting4 in this table MUST o… |
| 1.3.6.1.2.1.169.1.1.32.1 | RowpktcSigDevToneEntry | not-accessible | current | The different tone types that can be provisioned based on country-specific needs. Each entry contains the tone generation parameters for a specific frequency g… |
| 1.3.6.1.2.1.169.1.1.32.1.1 | ColumnpktcSigDevToneType | not-accessible | current | A unique value that will correspond to the different tone types. These tones can be provisioned based on country-specific needs. This object defines the type o… |
| 1.3.6.1.2.1.169.1.1.32.1.2 | ColumnpktcSigDevToneFreqGroup | not-accessible | current | This MIB object represents the Tone Sequence reference of a multi-sequence tone. |
| 1.3.6.1.2.1.169.1.1.32.1.3 | ColumnpktcSigDevToneFreqCounter | read-only | current | This MIB object represents the number of consecutive multi-frequency tones for the particular tone type in the multi-frequency table (pktcSigDevMultiFreqToneTa… |
| 1.3.6.1.2.1.169.1.1.32.1.4 | ColumnpktcSigDevToneWholeToneRepeatCount | read-only | current | This is the repeat count, which signifies how many times to repeat the entire on-off cadence sequence. Setting this object may result in a cadence duration lon… |
| 1.3.6.1.2.1.169.1.1.32.1.5 | ColumnpktcSigDevToneSteady | read-only | current | This MIB object represents the steady tone status. A value of 'true(1)' indicates that the steady tone is applied, and a value of 'false(2)' indicates otherwis… |
| 1.3.6.1.2.1.169.1.1.33 | TablepktcSigDevMultiFreqToneTable | not-accessible | current | This MIB table defines the characteristics of tones with multiple frequencies. The constraints imposed on the tones by the MIB table pktcSigDevToneTable need t… |
| 1.3.6.1.2.1.169.1.1.33.1 | RowpktcSigDevMultiFreqToneEntry | not-accessible | current | The different tone types with multiple frequencies that can be provisioned based on country-specific needs. |
| 1.3.6.1.2.1.169.1.1.33.1.1 | ColumnpktcSigDevToneNumber | not-accessible | current | This MIB object represents the frequency reference of a multi-frequency tone. |
| 1.3.6.1.2.1.169.1.1.33.1.2 | ColumnpktcSigDevToneFirstFreqValue | read-only | current | This MIB object represents the value of the first frequency of a tone type. A value of zero implies absence of the referenced frequency. |
| 1.3.6.1.2.1.169.1.1.33.1.3 | ColumnpktcSigDevToneSecondFreqValue | read-only | current | This MIB object represents the value of the second frequency of a tone type. A value of zero implies absence of the referenced frequency. |
| 1.3.6.1.2.1.169.1.1.33.1.4 | ColumnpktcSigDevToneThirdFreqValue | read-only | current | This MIB object represents the value of the third frequency of a tone type. A value of zero implies absence of the referenced frequency. |
| 1.3.6.1.2.1.169.1.1.33.1.5 | ColumnpktcSigDevToneFourthFreqValue | read-only | current | This MIB object represents the value of the fourth frequency of a tone type. A value of zero implies absence of the referenced frequency. |
| 1.3.6.1.2.1.169.1.1.33.1.6 | ColumnpktcSigDevToneFreqMode | read-only | current | This MIB object provides directive on the modulation or summation of the frequencies involved in the tone. It is to be noted that while summation can be done w… |
| 1.3.6.1.2.1.169.1.1.33.1.7 | ColumnpktcSigDevToneFreqAmpModePrtg | read-only | current | This MIB object represents the percentage of amplitude modulation applied to the second frequency when the MIB object pktcSigDevToneFreqMode is set to a value … |
| 1.3.6.1.2.1.169.1.1.33.1.8 | ColumnpktcSigDevToneDbLevel | read-only | current | This MIB object contains the decibel level for each analog signal (tone) that is locally generated (versus in-band supervisory tones) and sourced to the a-b te… |
| 1.3.6.1.2.1.169.1.1.33.1.9 | ColumnpktcSigDevToneFreqOnDuration | read-only | current | This MIB object represents the duration for which the frequency reference corresponding to the tone type is turned on. |
| 1.3.6.1.2.1.169.1.1.33.1.10 | ColumnpktcSigDevToneFreqOffDuration | read-only | current | This MIB object represents the duration for which the frequency reference corresponding to the tone type is turned off. |
| 1.3.6.1.2.1.169.1.1.33.1.11 | ColumnpktcSigDevToneFreqRepeatCount | read-only | current | This MIB object indicates the number of times to repeat the cadence cycle represented by the on/off durations (refer to the MIB objects pktcSigDevToneFreqOnDur… |
| 1.3.6.1.2.1.169.1.1.34 | ScalarpktcSigDevCidDelayAfterLR | read-write | current | This object specifies the delay between the end of the Line Reversal and the start of the FSK or DTMF signal. This MIB object is used only when pktcSigDevCidMo… |
| 1.3.6.1.2.1.169.1.1.35 | ScalarpktcSigDevCidDtmfStartCode | read-write | current | This object identifies optional start codes used when the MIB object pktcSigDevCidSigProtocol is set to a value of 'dtmf(2)'. Different countries define differ… |
| 1.3.6.1.2.1.169.1.1.36 | ScalarpktcSigDevCidDtmfEndCode | read-write | current | This object identifies optional end codes used when the pktcSigDevCidSigProtocol is set to a value of 'dtmf(2)'. Different countries define different caller id… |
| 1.3.6.1.2.1.169.1.1.37 | ScalarpktcSigDevVmwiSigProtocol | read-write | current | This object identifies the subscriber line protocol used for signaling the information on Visual Message Waiting Indicator (VMWI). Different countries define d… |
| 1.3.6.1.2.1.169.1.1.38 | ScalarpktcSigDevVmwiDelayAfterLR | read-write | current | This object specifies the delay between the end of the Line Reversal and the start of the FSK or DTMF signal. This object is only used when pktcSigDevVmwiMode … |
| 1.3.6.1.2.1.169.1.1.39 | ScalarpktcSigDevVmwiDtmfStartCode | read-write | current | This object identifies optional start codes used when the pktcSigDevVmwiSigProtocol is set to a value of 'dtmf(2)'. Different countries define different On Hoo… |
| 1.3.6.1.2.1.169.1.1.40 | ScalarpktcSigDevVmwiDtmfEndCode | read-write | current | This object identifies an optional end code used when the pktcSigDevVmwiSigProtocol is set to a value of 'dtmf(2)'. Different countries define different on-hoo… |
| 1.3.6.1.2.1.169.1.1.41 | ScalarpktcSigDevrpAsDtsDuration | read-write | current | This object specifies the duration of the rpASDTS ring pulse prior to the start of the transmission of the FSK or DTMF containing the caller id information. It… |
| 1.3.6.1.2.1.169.1.2 | NodepktcSigEndPntConfigObjects | |||
| 1.3.6.1.2.1.169.1.2.1 | TablepktcSigEndPntConfigTable | not-accessible | current | This table describes the information pertaining to each endpoint of the MTA. All entries in this table represent the provisioned endpoints provisioned with the… |
| 1.3.6.1.2.1.169.1.2.1.1 | RowpktcSigEndPntConfigEntry | not-accessible | current | Each entry in the pktcSigEndPntConfigTable represents required signaling parameters for the specific endpoint provisioned with voice services. The conceptual r… |
| 1.3.6.1.2.1.169.1.2.1.1.1 | ColumnpktcSigEndPntConfigCallAgentId | read-create | current | This object contains a string indicating the call agent name (e.g., ca@example.com). The call agent name, after the character '@', MUST be a fully qualified do… |
| 1.3.6.1.2.1.169.1.2.1.1.2 | ColumnpktcSigEndPntConfigCallAgentUdpPort | read-create | current | This object contains the current value of the User Datagram Protocol (UDP) receive port on which the call agent will receive NCS from the endpoint. For each pa… |
| 1.3.6.1.2.1.169.1.2.1.1.3 | ColumnpktcSigEndPntConfigPartialDialTO | read-create | current | This object contains the value of the partial dial time out. The time out (TO) elements are intended to limit the time a tone or frequency is generated. When t… |
| 1.3.6.1.2.1.169.1.2.1.1.4 | ColumnpktcSigEndPntConfigCriticalDialTO | read-create | current | This object contains the value of the critical dial time out. The time out (TO) elements are intended to limit the time a tone or frequency is generated. When … |
| 1.3.6.1.2.1.169.1.2.1.1.5 | ColumnpktcSigEndPntConfigBusyToneTO | read-create | current | This object contains the default time out value for busy tone. The MTA MUST NOT update this object with the value provided in the NCS message (if present). If … |
| 1.3.6.1.2.1.169.1.2.1.1.6 | ColumnpktcSigEndPntConfigDialToneTO | read-create | current | This object contains the default time out value for dial tone. The MTA MUST NOT update this object with the value provided in the NCS message (if present). If … |
| 1.3.6.1.2.1.169.1.2.1.1.7 | ColumnpktcSigEndPntConfigMessageWaitingTO | read-create | current | This object contains the default time out value for message waiting indicator. The MTA MUST NOT update this object with the value provided in the NCS message (… |
| 1.3.6.1.2.1.169.1.2.1.1.8 | ColumnpktcSigEndPntConfigOffHookWarnToneTO | read-create | current | This object contains the default time out value for the off-hook warning tone. The MTA MUST NOT update this object with the value provided in the NCS message (… |
| 1.3.6.1.2.1.169.1.2.1.1.9 | ColumnpktcSigEndPntConfigRingingTO | read-create | current | This object contains the default time out value for ringing. The MTA MUST NOT update this object with the value provided in the NCS message (if present). If th… |
| 1.3.6.1.2.1.169.1.2.1.1.10 | ColumnpktcSigEndPntConfigRingBackTO | read-create | current | This object contains the default time out value for ring back. The MTA MUST NOT update this object with the value provided in the NCS message (if present). If … |
| 1.3.6.1.2.1.169.1.2.1.1.11 | ColumnpktcSigEndPntConfigReorderToneTO | read-create | current | This object contains the default time out value for reorder tone. The MTA MUST NOT update this object with the value provided in the NCS message (if present). … |
| 1.3.6.1.2.1.169.1.2.1.1.12 | ColumnpktcSigEndPntConfigStutterDialToneTO | read-create | current | This object contains the default time out value for stutter dial tone. The MTA MUST NOT update this object with the value provided in the NCS message (if prese… |
| 1.3.6.1.2.1.169.1.2.1.1.13 | ColumnpktcSigEndPntConfigTSMax | read-create | current | This MIB object is used as part of an NCS retransmission algorithm. Prior to any retransmission, the MTA must check to make sure that the time elapsed since th… |
| 1.3.6.1.2.1.169.1.2.1.1.14 | ColumnpktcSigEndPntConfigMax1 | read-create | current | This object contains the suspicious error threshold for signaling messages. The pktcSigEndPntConfigMax1 object indicates the retransmission threshold at which … |
| 1.3.6.1.2.1.169.1.2.1.1.15 | ColumnpktcSigEndPntConfigMax2 | read-create | current | This object contains the disconnect error threshold for signaling messages. The pktcSigEndPntConfigMax2 object indicates the retransmission threshold at which … |
| 1.3.6.1.2.1.169.1.2.1.1.16 | ColumnpktcSigEndPntConfigMax1QEnable | read-create | current | This object enables/disables the Max1 domain name server (DNS) query operation when the pktcSigEndPntConfigMax1 threshold has been reached. A value of true(1) … |
| 1.3.6.1.2.1.169.1.2.1.1.17 | ColumnpktcSigEndPntConfigMax2QEnable | read-create | current | This object enables/disables the Max2 domain name server (DNS) query operation when the pktcSigEndPntConfigMax2 threshold has been reached. A value of true(1) … |
| 1.3.6.1.2.1.169.1.2.1.1.18 | ColumnpktcSigEndPntConfigMWD | read-create | current | Maximum Waiting Delay (MWD) contains the maximum number of seconds an MTA waits, after powering on, before initiating the restart procedure with the call agent. |
| 1.3.6.1.2.1.169.1.2.1.1.19 | ColumnpktcSigEndPntConfigTdinit | read-create | current | This MIB object represents the 'disconnected' initial waiting delay within the context of an MTA's 'disconnected procedure'. The 'disconnected procedure' is in… |
| 1.3.6.1.2.1.169.1.2.1.1.20 | ColumnpktcSigEndPntConfigTdmin | read-create | current | This MIB object represents the 'disconnected' minimum waiting delay within the context of an MTA's 'disconnected procedure', specifically when local user activ… |
| 1.3.6.1.2.1.169.1.2.1.1.21 | ColumnpktcSigEndPntConfigTdmax | read-create | current | This object contains the maximum number of seconds the MTA waits, after a disconnect, before initiating the disconnected procedure with the call agent. |
| 1.3.6.1.2.1.169.1.2.1.1.22 | ColumnpktcSigEndPntConfigRtoMax | read-create | current | This object specifies the maximum number of seconds the MTA waits for a response to an NCS message before initiating a retransmission. |
| 1.3.6.1.2.1.169.1.2.1.1.23 | ColumnpktcSigEndPntConfigRtoInit | read-create | current | This object contains the initial number of seconds for the retransmission timer. |
| 1.3.6.1.2.1.169.1.2.1.1.24 | ColumnpktcSigEndPntConfigLongDurationKeepAlive | read-create | current | Specifies a time out value, in minutes, for sending long duration call notification messages. |
| 1.3.6.1.2.1.169.1.2.1.1.25 | ColumnpktcSigEndPntConfigThist | read-create | current | Time out period, in seconds, before no response is declared. |
| 1.3.6.1.2.1.169.1.2.1.1.26 | ColumnpktcSigEndPntConfigStatus | read-create | current | This object contains the Row Status associated with the pktcSigEndPntConfigTable. There are no restrictions or dependencies amidst the columnar objects before … |
| 1.3.6.1.2.1.169.1.2.1.1.27 | ColumnpktcSigEndPntConfigCallWaitingMaxRep | read-create | current | This object contains the default value of the maximum number of repetitions of the Call Waiting tone that the MTA will play from a single CMS request. The MTA … |
| 1.3.6.1.2.1.169.1.2.1.1.28 | ColumnpktcSigEndPntConfigCallWaitingDelay | read-create | current | This object contains the delay between repetitions of the Call Waiting tone that the MTA will play from a single CMS request. |
| 1.3.6.1.2.1.169.1.2.1.1.29 | ColumnpktcSigEndPntStatusCallIpAddressType | read-only | current | This object contains the type of Internet address contained in the MIB object 'pktcSigEndPntStatusCallIpAddress'. Since pktcSigEndPntStatusCallIpAddress is exp… |
| 1.3.6.1.2.1.169.1.2.1.1.30 | ColumnpktcSigEndPntStatusCallIpAddress | read-only | current | This MIB object contains the chosen IP address of the CMS currently being used for the corresponding endpoint. The device determines the IP address by using DN… |
| 1.3.6.1.2.1.169.1.2.1.1.31 | ColumnpktcSigEndPntStatusError | read-only | current | This object contains the error status for this interface. The operational status indicates that all operations necessary to put the line in service have occurr… |
| 1.3.6.1.2.1.169.1.2.1.1.32 | ColumnpktcSigEndPntConfigMinHookFlash | read-only | current | This is the minimum time a line needs to be on-hook for a valid hook flash. The value of this object MUST be greater than the value of pktcSigEndPntConfigPulse… |
| 1.3.6.1.2.1.169.1.2.1.1.33 | ColumnpktcSigEndPntConfigMaxHookFlash | read-only | current | This is the maximum time a line needs to be on-hook for a valid hook flash. The value of pktcSigEndPntConfigMaxHookFlash MUST be greater than pktcSigEndPntConf… |
| 1.3.6.1.2.1.169.1.2.1.1.34 | ColumnpktcSigEndPntConfigPulseDialInterdigitTime | read-only | current | This is the pulse dial inter-digit time out. This object MUST only be set via the MTA configuration during the provisioning process. |
| 1.3.6.1.2.1.169.1.2.1.1.35 | ColumnpktcSigEndPntConfigPulseDialMinMakeTime | read-only | current | This is the minimum make pulse width for the dial pulse. The value of pktcSigEndPntConfigPulseDialMinMakeTime MUST be less than pktcSigEndPntConfigPulseDialMax… |
| 1.3.6.1.2.1.169.1.2.1.1.36 | ColumnpktcSigEndPntConfigPulseDialMaxMakeTime | read-only | current | This is the maximum make pulse width for the dial pulse. The value of pktcSigEndPntConfigPulseDialMaxMakeTime MUST be greater than pktcSigEndPntConfigPulseDial… |
| 1.3.6.1.2.1.169.1.2.1.1.37 | ColumnpktcSigEndPntConfigPulseDialMinBreakTime | read-only | current | This is the minimum break pulse width for the dial pulse. The value of pktcSigEndPntConfigPulseDialMinBreakTime MUST be less than pktcSigEndPntConfigPulseDialM… |
| 1.3.6.1.2.1.169.1.2.1.1.38 | ColumnpktcSigEndPntConfigPulseDialMaxBreakTime | read-only | current | This is the maximum break pulse width for the dial pulse. The value of pktcSigEndPntConfigPulseDialMaxBreakTime MUST be greater than pktcSigEndPntConfigPulseDi… |
| 1.3.6.1.2.1.169.2 | NodepktcSigConformance | |||
| 1.3.6.1.2.1.169.2.1 | NodepktcSigCompliances | |||
| 1.3.6.1.2.1.169.2.1.1 | CompliancepktcSigBasicCompliance | current | The compliance statement for MTAs that implement NCS signaling. | |
| 1.3.6.1.2.1.169.2.2 | NodepktcSigGroups | |||
| 1.3.6.1.2.1.169.2.2.1 | GrouppktcSigDeviceGroup | current | Group of MIB objects containing signaling configuration information that is applicable per-device. | |
| 1.3.6.1.2.1.169.2.2.2 | GrouppktcSigEndpointGroup | current | Group of MIB objects containing signaling configuration information that is applicable per-endpoint. | |
| 1.3.6.1.2.1.169.2.2.3 | GrouppktcInternationalGroup | current | Group of objects that extend the behavior of existing objects to support operations in the widest possible set of international marketplaces. Note that many of… | |
| 1.3.6.1.2.1.169.2.2.4 | GrouppktcLLinePackageGroup | current | Group of Objects to support the L line package. | |
| 1.3.6.1.2.1.169.2.2.5 | GrouppktcELinePackageGroup | current | Group of Objects to support the E line package. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PktcCodecType | INTEGER { other (1), unknown (2), g729 (3), reserved (4), g729E (5), pcmu (6), g726at32 (7), g728 (8), pcma (9), g726at16 (10), g726at24 (11), g726at40 (12), ilbc (13), bv16 (14) } | current | This TEXTUAL-CONVENTION defines various types of codecs that MAY be supported. The description for each enumeration is listed below: Enumeration Description other a defined codec not in the enumeration unknown a codec n… |
| PktcRingCadence | OCTET STRING (SIZE(4..36)) | current | This object provides an encoding scheme for ring cadences, including repeatability characteristics. All fields in this object MUST be encoded in network-byte order. The first three higher-order octets are reserved. The … |
| PktcSigType | INTEGER { other(1), ncs(2) } DtmfCode::=TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TEXTUAL-CONVENTION represents the Dual-Tone Multi-Frequency (DTMF) Character used to indicate the start or end of the digit transition sequence used for caller id or Visual Message Waiting Indicator (VMWI). Note: The DTMF code '*' is indicated using 'dtmfcodeStar', and the DTMF code '#' is indicated using ' dtmfcodeHash'." SYNTAX INTEGER { dtmfcode0(0), dtmfcode1(1), dtmfcode2(2), dtmfcode3(3), dtmfcode4(4), dtmfcode5(5), dtmfcode6(6), dtmfcode7(7), dtmfcode8(8), dtmfcode9(9), dtmfcodeStar(10), dtmfcodeHash(11), dtmfcodeA(12), dtmfcodeB(13), dtmfcodeC(14), dtmfcodeD(15) } PktcSubscriberSideSigProtocol::=TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TEXTUAL-CONVENTION represents the Signaling protocol being used for purposes such as caller id or VMWI. A value of fsk(1) indicates Frequency Shift Keying (FSK). A value of dtmf(2) indicates Dual-Tone Multi-Frequency (DTMF)." SYNTAX INTEGER { fsk(1), dtmf(2) } | current | This object lists the various types of signaling that may be supported: other(1) - set when signaling other than NCS is used ncs(2) - Network Call Signaling is a derivation of MGCP (Media Gateway Control Protocol) defin… |
| TenthdBm | Integer32 | current | This TEXTUAL-CONVENTION represents power levels that are normally expressed in dBm. Units are in tenths of a dBm; for example, -13.5 dBm will be represented as -135. |