PKTC-SIG-MIB
85 objects
This MIB module supplies the basic management object for the PacketCable Signaling protocols. This version of the MIB includes common signaling and Network Call Signaling (NCS) related signaling objects. Acknowledgements: Angela Lyda Arris Interactive Sasha Medvinsky Motorola Roy Spitzer Telogy Networks, Inc. Rick Vetter Motorola Itay Sherman Texas Instruments Klaus Hermanns Cisco Systems Eugene Nechamkin Broadcom Corp. Satish Kumar Texas Instruments Copyright 1999-2004 Cable Television Laboratories, Inc. All rights reserved.
Imported Objects
| CLAB-DEF-MIB | clabProjPacketCable |
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.2.2 | IdentitypktcSigMib | This MIB module supplies the basic management object for the PacketCable Signaling protocols. This version of the MIB includes common signaling and Network Cal… | ||
| 1.3.6.1.4.1.4491.2.2.2.1 | NodepktcSigMibObjects | |||
| 1.3.6.1.4.1.4491.2.2.2.1.1 | NodepktcSigDevConfigObjects | |||
| 1.3.6.1.4.1.4491.2.2.2.1.1.1 | TablepktcSigDevCodecTable | not-accessible | current | This table describes the MTA supported codec types. |
| 1.3.6.1.4.1.4491.2.2.2.1.1.1.1 | RowpktcSigDevCodecEntry | not-accessible | current | List of supported codecs types for the MTA. |
| 1.3.6.1.4.1.4491.2.2.2.1.1.1.1.1 | ColumnpktcSigDevCodecIndex | not-accessible | current | The index value which uniquely identifies an entry in the pktcSigDevCodecTable. |
| 1.3.6.1.4.1.4491.2.2.2.1.1.1.1.2 | ColumnpktcSigDevCodecType | read-only | current | A codec type supported by this MTA. |
| 1.3.6.1.4.1.4491.2.2.2.1.1.1.1.3 | ColumnpktcSigDevCodecMax | read-only | current | The maximum number of simultaneous sessions of the specific codec that the MTA can support |
| 1.3.6.1.4.1.4491.2.2.2.1.1.2 | ScalarpktcSigDevEchoCancellation | read-only | current | This object specifies if the device is capable of echo cancellation. |
| 1.3.6.1.4.1.4491.2.2.2.1.1.3 | ScalarpktcSigDevSilenceSuppression | read-only | current | This object specifies if the device is capable of silence suppression (Voice Activity Detection). |
| 1.3.6.1.4.1.4491.2.2.2.1.1.4 | ScalarpktcSigDevConnectionMode | read-only | current | This object specifies the connection modes that the MTA device can support. |
| 1.3.6.1.4.1.4491.2.2.2.1.1.5 | ScalarpktcSigDevR0Cadence | read-write | current | This object specifies ring cadence 0 (a user defined field) where each bit (least significant bit) represents a duration of 200 milliseconds (6 seconds total). |
| 1.3.6.1.4.1.4491.2.2.2.1.1.6 | ScalarpktcSigDevR6Cadence | read-write | current | This object specifies ring cadence 6 (a user defined field) where each bit (least significant bit) represents a duration of 200 milliseconds (6 seconds total). |
| 1.3.6.1.4.1.4491.2.2.2.1.1.7 | ScalarpktcSigDevR7Cadence | read-write | current | This object specifies ring cadence 7 (a user defined field) where each bit (least significant bit) represents a duration of 200 milliseconds (6 seconds total). |
| 1.3.6.1.4.1.4491.2.2.2.1.1.8 | ScalarpktcSigDefCallSigTos | read-write | current | The default value used in the IP header for setting the Type of Service (TOS) value for call signalling. |
| 1.3.6.1.4.1.4491.2.2.2.1.1.9 | ScalarpktcSigDefMediaStreamTos | read-write | current | The default value used in the IP header for setting the Type of Service (TOS) value for media stream packets. |
| 1.3.6.1.4.1.4491.2.2.2.1.1.10 | ScalarpktcSigTosFormatSelector | read-write | current | The format of the default signaling and media Type of Service (TOS) values. |
| 1.3.6.1.4.1.4491.2.2.2.1.1.11 | TablepktcSigCapabilityTable | not-accessible | current | This table describes the signaling types by this MTA. |
| 1.3.6.1.4.1.4491.2.2.2.1.1.11.1 | RowpktcSigCapabilityEntry | not-accessible | current | Entries in pktcMtaDevSigCapabilityTable - List of supported signaling types, versions and vendor extensions for this MTA. Each entry in the list provides for o… |
| 1.3.6.1.4.1.4491.2.2.2.1.1.11.1.1 | ColumnpktcSignalingIndex | not-accessible | current | The index value which uniquely identifies an entry in the pktcSigCapabilityTable. |
| 1.3.6.1.4.1.4491.2.2.2.1.1.11.1.2 | ColumnpktcSignalingType | read-only | current | The Type identifies the type of signaling used, this can be NCS, DCS, etc. This value has to be associated with a single signaling version - reference pktcMtaD… |
| 1.3.6.1.4.1.4491.2.2.2.1.1.11.1.3 | ColumnpktcSignalingVersion | read-only | current | Provides the version of the signaling type - reference pktcSignalingType. Examples would be 1.0 or 2.33 etc. |
| 1.3.6.1.4.1.4491.2.2.2.1.1.11.1.4 | ColumnpktcSignalingVendorExtension | read-only | current | The vendor extension allows vendors to provide a list of additional capabilities, vendors can decide how to encode these Extensions, although space separated t… |
| 1.3.6.1.4.1.4491.2.2.2.1.1.12 | ScalarpktcSigDefNcsReceiveUdpPort | read-only | current | This object contains the MTA User Datagram Protocol (UDP) receive port that is being used for NCS call signaling. This object should only be changed by the con… |
| 1.3.6.1.4.1.4491.2.2.2.1.1.13 | ScalarpktcSigServiceClassNameUS | read-write | current | This object contains a string indicating the Service Class name to create an Upstream Service (US) Flow for NCS. If the object has an empty string value then t… |
| 1.3.6.1.4.1.4491.2.2.2.1.1.14 | ScalarpktcSigServiceClassNameDS | read-write | current | This object contains a string indicating the Service Class Name to create a Downstream Service Flow for NCS. If the object has an empty string value then the N… |
| 1.3.6.1.4.1.4491.2.2.2.1.1.15 | ScalarpktcSigServiceClassNameMask | read-write | current | This object contains a value for the Call Signaling Network Mask. The value is used as the NCS Call Signaling classifier mask. The object is used to delete the… |
| 1.3.6.1.4.1.4491.2.2.2.1.1.16 | ScalarpktcSigNcsServiceFlowState | read-only | current | This object contains a status value of the Call Signaling Service Flow. - 'notactive' indicates that the NCS SF is not being used, and has not tried to be crea… |
| 1.3.6.1.4.1.4491.2.2.2.1.1.17 | ScalarpktcSigDevR1Cadence | read-write | current | This object specifies ring cadence 1 (a user defined field) where each bit (least significant bit) represents a duration of 100 milliseconds (6 seconds total). |
| 1.3.6.1.4.1.4491.2.2.2.1.1.18 | ScalarpktcSigDevR2Cadence | read-write | current | This object specifies ring cadence 2 (a user defined field) where each bit (least significant bit) represents a duration of 100 milliseconds (6 seconds total). |
| 1.3.6.1.4.1.4491.2.2.2.1.1.19 | ScalarpktcSigDevR3Cadence | read-write | current | This object specifies ring cadence 3 (a user defined field) where each bit (least significant bit) represents a duration of 100 milliseconds (6 seconds total). |
| 1.3.6.1.4.1.4491.2.2.2.1.1.20 | ScalarpktcSigDevR4Cadence | read-write | current | This object specifies ring cadence 4 (a user defined field) where each bit (least significant bit) represents a duration of 100 milliseconds (6 seconds total). |
| 1.3.6.1.4.1.4491.2.2.2.1.1.21 | ScalarpktcSigDevR5Cadence | read-write | current | This object specifies ring cadence 5 (a user defined field) where each bit (least significant bit) represents a duration of 100 milliseconds. |
| 1.3.6.1.4.1.4491.2.2.2.1.1.22 | ScalarpktcSigDevRgCadence | read-write | current | This object specifies ring cadence rg (a user defined field) where each bit (least significant bit) represents a duration of 100 milliseconds (6 seconds total). |
| 1.3.6.1.4.1.4491.2.2.2.1.1.23 | ScalarpktcSigDevRsCadence | read-write | current | This object specifies ring cadence rs (a user defined field) where each bit (least significant bit) represents a duration of 100 milliseconds (6 seconds total)… |
| 1.3.6.1.4.1.4491.2.2.2.1.1.24 | ScalarpktcSigDevRtCadence | read-write | current | This object specifies ring cadence rt (a user defined field) where each bit (least significant bit) represents a duration of 100 milliseconds (6 seconds total). |
| 1.3.6.1.4.1.4491.2.2.2.1.2 | NodepktcNcsEndPntConfigObjects | |||
| 1.3.6.1.4.1.4491.2.2.2.1.2.1 | TablepktcNcsEndPntConfigTable | not-accessible | current | This table describes the PacketCable EndPoint selected signaling type. The number of entries in this table represents the number of provisioned end points. For… |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1 | RowpktcNcsEndPntConfigEntry | not-accessible | current | Entries in pktcNcsEndPntConfigTable - Each entry describes what signaling type a particular endpoint uses. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.1 | ColumnpktcNcsEndPntConfigCallAgentId | read-create | current | This object contains a string indicating the call agent name(ex: ca@abc.def.com). The call agent name after the character '@' MUST be a fully qualified domain … |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.2 | ColumnpktcNcsEndPntConfigCallAgentUdpPort | read-create | current | This object contains the call agent User Datagram Protocol (UDP) receive port that is being used for this instance of call signaling, i.e. the default port on … |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.3 | ColumnpktcNcsEndPntConfigPartialDialTO | read-create | current | This object contains maximum value of the partial dial time out. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.4 | ColumnpktcNcsEndPntConfigCriticalDialTO | read-create | current | This object contains the maximum value of the critical dial time out. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.5 | ColumnpktcNcsEndPntConfigBusyToneTO | read-create | current | This object contains the timeout value for busy tone. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.6 | ColumnpktcNcsEndPntConfigDialToneTO | read-create | current | This object contains the timeout value for dial tone. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.7 | ColumnpktcNcsEndPntConfigMessageWaitingTO | read-create | current | This object contains the timeout value for message waiting indicator. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.8 | ColumnpktcNcsEndPntConfigOffHookWarnToneTO | read-create | current | This object contains the timeout value for the off hook Warning tone. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.9 | ColumnpktcNcsEndPntConfigRingingTO | read-create | current | This object contains the timeout value for ringing. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.10 | ColumnpktcNcsEndPntConfigRingBackTO | read-create | current | This object contains the timeout value for ring back. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.11 | ColumnpktcNcsEndPntConfigReorderToneTO | read-create | current | This object contains the timeout value for reorder tone. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.12 | ColumnpktcNcsEndPntConfigStutterDialToneTO | read-create | current | This object contains the timeout value for stutter dial tone. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.13 | ColumnpktcNcsEndPntConfigTSMax | read-create | current | This object contains the max time in seconds since the sending of the initial datagram. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.14 | ColumnpktcNcsEndPntConfigMax1 | read-create | current | This object contains the suspicious error threshold for signaling messages. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.15 | ColumnpktcNcsEndPntConfigMax2 | read-create | current | This object contains the disconnect error threshold for signaling messages. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.16 | ColumnpktcNcsEndPntConfigMax1QEnable | read-create | current | This object enables/disables the Max1 Domain Name Server (DNS) query operation when Max1 expires. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.17 | ColumnpktcNcsEndPntConfigMax2QEnable | read-create | current | This object enables/disables the Max2 DNS query operation when Max2 expires. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.18 | ColumnpktcNcsEndPntConfigMWD | read-create | current | Maximum Waiting Delay (MWD) contains the maximum number of seconds a MTA waits after a restart. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.19 | ColumnpktcNcsEndPntConfigTdinit | read-create | current | This object contains the initial number of seconds a MTA waits after a disconnect. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.20 | ColumnpktcNcsEndPntConfigTdmin | read-create | current | This object contains the minimum number of seconds a MTA waits after a disconnect. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.21 | ColumnpktcNcsEndPntConfigTdmax | read-create | current | This object contains the maximum number of seconds a MTA waits after a disconnect. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.22 | ColumnpktcNcsEndPntConfigRtoMax | read-create | current | This object contains the maximum number of seconds for the retransmission timer. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.23 | ColumnpktcNcsEndPntConfigRtoInit | read-create | current | This object contains the initial number of seconds for the retransmission timer. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.24 | ColumnpktcNcsEndPntConfigLongDurationKeepAlive | read-create | current | Specifies a timeout value in minutes for sending long duration call notification message. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.25 | ColumnpktcNcsEndPntConfigThist | read-create | current | Timeout period in seconds before no response is declared. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.26 | ColumnpktcNcsEndPntConfigStatus | read-create | current | This object contains the Row Status associated with the pktsNcsEndPntTable. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.27 | ColumnpktcNcsEndPntConfigCallWaitingMaxRep | read-create | current | This object contains the maximum number of repetitions of the call waiting tone that the MTA will play from a single CMS request. A value of zero (0) can be us… |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.28 | ColumnpktcNcsEndPntConfigCallWaitingDelay | read-create | current | This object contains the delay between repetitions of the call waiting tone that the MTA will play from a single CMS request. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.29 | ColumnpktcNcsEndPntStatusCallIpAddress | read-only | current | This object contains the IP address of the CMS currently being used for this endpoint. This IP address is used to create the appropriate security association. |
| 1.3.6.1.4.1.4491.2.2.2.1.2.1.1.30 | ColumnpktcNcsEndPntStatusError | read-only | current | This object contains the error status for this interface. The operational state indicates that all operations necessary to put the line in service have occurre… |
| 1.3.6.1.4.1.4491.2.2.2.1.3 | NodepktcSigEndPntConfigObjects | |||
| 1.3.6.1.4.1.4491.2.2.2.1.3.1 | TablepktcSigEndPntConfigTable | not-accessible | current | This table describes the PacketCable EndPoint selected signaling type. The number of entries in this table represents the number of provisioned end points. For… |
| 1.3.6.1.4.1.4491.2.2.2.1.3.1.1 | RowpktcSigEndPntConfigEntry | not-accessible | current | Entries in pktcSigEndPntConfigTable - Each entry describes what signaling type a particular endpoint uses. |
| 1.3.6.1.4.1.4491.2.2.2.1.3.1.1.1 | ColumnpktcSigEndPntCapabilityIndex | read-create | current | The associated index value in the pktcSigCapablityTable. |
| 1.3.6.1.4.1.4491.2.2.2.1.4 | NodepktcDcsEndPntConfigObjects | |||
| 1.3.6.1.4.1.4491.2.2.2.2 | NodepktcSigNotificationPrefix | |||
| 1.3.6.1.4.1.4491.2.2.2.2.0 | NodepktcSigNotification | |||
| 1.3.6.1.4.1.4491.2.2.2.3 | NodepktcSigConformance | |||
| 1.3.6.1.4.1.4491.2.2.2.3.1 | NodepktcSigCompliances | |||
| 1.3.6.1.4.1.4491.2.2.2.3.1.1 | CompliancepktcSigBasicCompliance | current | The compliance statement for devices that implement Signaling on the MTA. | |
| 1.3.6.1.4.1.4491.2.2.2.3.2 | NodepktcSigGroups | |||
| 1.3.6.1.4.1.4491.2.2.2.3.2.1 | GrouppktcSigGroup | current | Group of objects for the common portion of the PacketCable Signaling MIB. | |
| 1.3.6.1.4.1.4491.2.2.2.3.2.2 | GrouppktcNcsGroup | current | Group of objects for the NCS portion of the PacketCable Signaling MIB. This is mandatory for NCS signaling. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PktcCodecType | INTEGER { other (1), unknown (2), g729 (3), reserved (4), g729E (5), pcmu (6), g726at32 (7), g728 (8), pcma (9), g726at16 (10), g726at24 (11), g726at40 (12) } | current | Textual Convention defines various types of CODECs that MAY be supported. The list of CODECs MUST be consistent with the Codec RTP MAP Parameters Table in the PacketCable CODEC specification. In-line embedded comments b… |
| PktcRingCadence | BITS { interval1 (0), interval2 (1), interval3 (2), interval4 (3), interval5 (4), interval6 (5), interval7 (6), interval8 (7), interval9 (8), interval10 (9), interval11 (10), interval12 (11), interval13 (12), interval14 (13), interval15 (14), interval16 (15), interval17 (16), interval18 (17), interval19 (18), interval20 (19), interval21 (20), interval22 (21), interval23 (22), interval24 (23), interval25 (24), interval26 (25), interval27 (26), interval28 (27), interval29 (28), interval30 (29), interval31 (30), interval32 (31), interval33 (32), interval34 (33), interval35 (34), interval36 (35), interval37 (36), interval38 (37), interval39 (38), interval40 (39), interval41 (40), interval42 (41), interval43 (42), interval44 (43), interval45 (44), interval46 (45), interval47 (46), interval48 (47), interval49 (48), interval50 (49), interval51 (50), interval52 (51), interval53 (52), interval54 (53), interval55 (54), interval56 (55), interval57 (56), interval58 (57), interval59 (58), interval60 (59), interval61 (60), interval62 (61), interval63 (62), interval64 (63) } | current | This object represents a ring cadence in bit string format. The ring cadence representation starts with the first 1 in the pattern (the leading 0s in the MSB are padding and are to be ignored). Each bit represents 100ms… |
| PktcSigType | INTEGER { other(1), unknown(2), ncs(3), dcs(4) } | current | These are the various types of signaling that may be supported. ncs - network call signaling a derivation of MGCP (Media Gateway Control Protocol) version 1.0 dcs - distributed call signaling a derivation of SIP (Sessio… |