PLEXCOM-MIB
241 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.465 | Nodeplexcom | |||
| 1.3.6.1.4.1.465.1 | NodeplxNode | |||
| 1.3.6.1.4.1.465.1.1 | NodeplxAgent | |||
| 1.3.6.1.4.1.465.1.1.1 | NodeplxStBridgeagent | |||
| 1.3.6.1.4.1.465.1.1.1.1 | NodeplxStBridgesnmpd | |||
| 1.3.6.1.4.1.465.1.1.1.1.4 | NodeplxPlexcomHub8091 | |||
| 1.3.6.1.4.1.465.1.1.1.1.5 | NodeplxPlexcomHub8039 | |||
| 1.3.6.1.4.1.465.1.1.1.1.6 | NodeplxPlexcomHub8029 | |||
| 1.3.6.1.4.1.465.1.1.1.1.7 | NodeplxPlexcomHub8093 | |||
| 1.3.6.1.4.1.465.1.1.2 | NodeplxRepeaterAgent | |||
| 1.3.6.1.4.1.465.1.1.2.1 | NodeplxPlexcom8025 | |||
| 1.3.6.1.4.1.465.1.1.2.1.1 | NodeplxPlexcom8025SX | |||
| 1.3.6.1.4.1.465.1.1.2.1.2 | NodeplxPlexcom8025SXT | |||
| 1.3.6.1.4.1.465.1.1.2.1.3 | NodeplxPlexcomH8025SXT | |||
| 1.3.6.1.4.1.465.1.1.2.1.4 | NodeplxPlexcomH8025SX | |||
| 1.3.6.1.4.1.465.1.1.2.1.5 | NodeplxPlexcomS8025SXT | |||
| 1.3.6.1.4.1.465.1.1.2.1.6 | NodeplxPlexcomS8025SX | |||
| 1.3.6.1.4.1.465.1.1.2.2 | NodeplxPlexcomPlexSTACK | |||
| 1.3.6.1.4.1.465.1.1.2.2.1 | NodeplxPlexcom4000i | |||
| 1.3.6.1.4.1.465.1.1.2.2.2 | NodeplxPlexcom4000iR | |||
| 1.3.6.1.4.1.465.1.1.3 | NodeplxSwitchAgent | |||
| 1.3.6.1.4.1.465.1.1.3.1 | NodeplxPlexcom5108 | |||
| 1.3.6.1.4.1.465.1.2 | NodeplxModule | |||
| 1.3.6.1.4.1.465.1.2.1 | NodeplxModuleUnknown | |||
| 1.3.6.1.4.1.465.1.2.2 | NodeplxModule8010 | |||
| 1.3.6.1.4.1.465.1.2.3 | NodeplxModule8011 | |||
| 1.3.6.1.4.1.465.1.2.4 | NodeplxModule8023A | |||
| 1.3.6.1.4.1.465.1.2.5 | NodeplxModule8024A | |||
| 1.3.6.1.4.1.465.1.2.6 | NodeplxModule8024T | |||
| 1.3.6.1.4.1.465.1.2.7 | NodeplxModule8026A | |||
| 1.3.6.1.4.1.465.1.2.8 | NodeplxModule8026T | |||
| 1.3.6.1.4.1.465.1.2.9 | NodeplxModule8029M | |||
| 1.3.6.1.4.1.465.1.2.10 | NodeplxModule8091M | |||
| 1.3.6.1.4.1.465.1.2.11 | NodeplxModule8023 | |||
| 1.3.6.1.4.1.465.1.2.13 | NodeplxModule8031 | |||
| 1.3.6.1.4.1.465.1.2.14 | NodeplxModule8031A | |||
| 1.3.6.1.4.1.465.1.2.15 | NodeplxModule8033 | |||
| 1.3.6.1.4.1.465.1.2.16 | NodeplxModule8034 | |||
| 1.3.6.1.4.1.465.1.2.17 | NodeplxModule8033A | |||
| 1.3.6.1.4.1.465.1.2.24 | NodeplxModule8024FO | |||
| 1.3.6.1.4.1.465.1.2.32 | NodeplxModule8039M | |||
| 1.3.6.1.4.1.465.1.2.33 | NodeplxModule8039S | |||
| 1.3.6.1.4.1.465.1.2.34 | NodeplxModule8026FO | |||
| 1.3.6.1.4.1.465.1.2.35 | NodeplxModule8408 | |||
| 1.3.6.1.4.1.465.1.2.36 | NodeplxModule8400FO | |||
| 1.3.6.1.4.1.465.1.2.43 | NodeplxModule8032-R | |||
| 1.3.6.1.4.1.465.1.2.45 | NodeplxModule8032-1P | |||
| 1.3.6.1.4.1.465.1.2.47 | NodeplxModule8032-2P | |||
| 1.3.6.1.4.1.465.1.2.51 | NodeplxModule8032-4P | |||
| 1.3.6.1.4.1.465.1.2.55 | NodeplxModule8032-6P | |||
| 1.3.6.1.4.1.465.1.2.56 | NodeplxModule2008SX | |||
| 1.3.6.1.4.1.465.1.2.58 | NodeplxModule8035 | |||
| 1.3.6.1.4.1.465.1.2.59 | NodeplxModule8035STP | |||
| 1.3.6.1.4.1.465.1.2.60 | NodeplxModule8036 | |||
| 1.3.6.1.4.1.465.1.2.70 | NodeplxModule8023SX | |||
| 1.3.6.1.4.1.465.1.2.71 | NodeplxModule8012SX-1 | |||
| 1.3.6.1.4.1.465.1.2.72 | NodeplxModule8012SX-6 | |||
| 1.3.6.1.4.1.465.1.2.73 | NodeplxModule8024SX | |||
| 1.3.6.1.4.1.465.1.2.74 | NodeplxModule8027SX | |||
| 1.3.6.1.4.1.465.1.2.75 | NodeplxModule8091SXM | |||
| 1.3.6.1.4.1.465.1.2.76 | NodeplxModule8029SX-3M | |||
| 1.3.6.1.4.1.465.1.2.77 | NodeplxModule8029SX-3S | |||
| 1.3.6.1.4.1.465.1.2.78 | NodeplxModule8025SX | |||
| 1.3.6.1.4.1.465.1.2.79 | NodeplxModule8025SXT | |||
| 1.3.6.1.4.1.465.1.2.81 | NodeplxModuleH8025SX | |||
| 1.3.6.1.4.1.465.1.2.82 | NodeplxModuleS8025SXT | |||
| 1.3.6.1.4.1.465.1.2.83 | NodeplxModuleS8025SX | |||
| 1.3.6.1.4.1.465.1.2.84 | NodeplxModule8408FO | |||
| 1.3.6.1.4.1.465.1.2.85 | NodeplxModule8012SX-2 | |||
| 1.3.6.1.4.1.465.1.2.86 | NodeplxModule8012SX-4 | |||
| 1.3.6.1.4.1.465.1.2.88 | NodeplxModule8026SX | |||
| 1.3.6.1.4.1.465.1.2.89 | NodeplxModule8035SX | |||
| 1.3.6.1.4.1.465.1.2.90 | NodeplxModuleP8035SX | |||
| 1.3.6.1.4.1.465.1.2.91 | NodeplxModule8093SXM | |||
| 1.3.6.1.4.1.465.1.2.92 | NodeplxModule8093SXS | |||
| 1.3.6.1.4.1.465.1.2.93 | NodeplxModule8039SXM | |||
| 1.3.6.1.4.1.465.1.2.94 | NodeplxModule8039SXS | |||
| 1.3.6.1.4.1.465.2 | NodeplxFilterTable | |||
| 1.3.6.1.4.1.465.2.1 | NodeplxFtConfig | |||
| 1.3.6.1.4.1.465.2.1.1 | ScalarplxFtMaxAge | read-write | mandatory | Maximum age of a filter table entry before it is deleted from the table. The value is multiplied by plxFtAgeTime (update timer interval) to form the timer valu… |
| 1.3.6.1.4.1.465.2.1.2 | ScalarplxFtMaxRemove | read-write | mandatory | When the filter table is full and new entries need to be made, the oldest plxFtMaxRemove number of entries are removed. |
| 1.3.6.1.4.1.465.2.1.3 | ScalarplxFtMaxFilter | read-only | mandatory | Size of the filter table. |
| 1.3.6.1.4.1.465.2.1.4 | ScalarplxFtAgeTime | read-write | mandatory | Filter table age timer interval. The filter entry age is incremented every plxFtAgeTime seconds. |
| 1.3.6.1.4.1.465.2.1.5 | ScalarplxFtMaxPerm | read-write | mandatory | Max number of permanent filter table entries. Setting this value to zero clears all permanent and dynamic entries from the filter table. Any other set is ignor… |
| 1.3.6.1.4.1.465.2.1.6 | ScalarplxFtForwMBcast | read-write | mandatory | Enable or disable forwarding of broadcasts and multicasts. |
| 1.3.6.1.4.1.465.2.1.7 | ScalarplxFtSecureMode | read-write | mandatory | Enable or disable 'secure' mode. In 'secure' mode the bridge does not learn filter table entries dynamically. |
| 1.3.6.1.4.1.465.2.2 | NodeplxFtEntry | |||
| 1.3.6.1.4.1.465.2.2.1 | ScalarplxFtAge | read-write | mandatory | Filter table entry age. Instance is a six element object identifier representing the MAC address. |
| 1.3.6.1.4.1.465.2.2.2 | ScalarplxFtDisp | read-write | mandatory | Filter table entry disposition. Instance is a six element object identifier representing the MAC address. |
| 1.3.6.1.4.1.465.3 | NodeplxInterfaceErrors | |||
| 1.3.6.1.4.1.465.3.1 | ScalarplxIfeInBusErr | read-only | mandatory | Bus read errors (Ethernet chip error). |
| 1.3.6.1.4.1.465.3.2 | ScalarplxIfeInShortPkt | read-only | mandatory | Short frames received. |
| 1.3.6.1.4.1.465.3.3 | ScalarplxIfeInAlgError | read-only | mandatory | Frames received with bad alignment. |
| 1.3.6.1.4.1.465.3.4 | ScalarplxIfeInBadSize | read-only | mandatory | Frames received with bad length. |
| 1.3.6.1.4.1.465.3.5 | ScalarplxIfeInOverflow | read-only | mandatory | Receive buffer overflow errors. |
| 1.3.6.1.4.1.465.3.6 | ScalarplxIfeInCRCErr | read-only | mandatory | Frames received with CRC errors. |
| 1.3.6.1.4.1.465.3.7 | ScalarplxIfeOutCol16 | read-only | mandatory | Frames discarded due to excess collisions. |
| 1.3.6.1.4.1.465.3.8 | ScalarplxIfeOutCol | read-only | mandatory | Transmit collisions. |
| 1.3.6.1.4.1.465.3.9 | ScalarplxIfeOutShortPkt | read-only | mandatory | Short packets transmitted (Ethernet chip error). |
| 1.3.6.1.4.1.465.3.10 | ScalarplxIfeOutUnderflow | read-only | mandatory | Transmit buffer underflow. |
| 1.3.6.1.4.1.465.3.11 | ScalarplxIfeOutBusErr | read-only | mandatory | Bus write errors (Ethernet chip error). |
| 1.3.6.1.4.1.465.4 | NodeplxForwardCounters | |||
| 1.3.6.1.4.1.465.4 | NodeplxPanicMesgTrap | The plxPanicMesgTrap trap is generated when the agent resets for a reason other than a normal hardware reset or restart condition. The plxSysPanicMesg variable… | ||
| 1.3.6.1.4.1.465.4.1 | ScalarplxFcInOctets | read-only | mandatory | Received bytes. |
| 1.3.6.1.4.1.465.4.2 | ScalarplxFcInPkts | read-only | mandatory | Received frames. |
| 1.3.6.1.4.1.465.4.3 | ScalarplxFcInNUcastPkts | read-only | mandatory | Received multicast and broadcast frames. |
| 1.3.6.1.4.1.465.4.4 | ScalarplxFcForwOctets | read-only | mandatory | Forwarded bytes. |
| 1.3.6.1.4.1.465.4.5 | ScalarplxFcForwPkts | read-only | mandatory | Forward frames. |
| 1.3.6.1.4.1.465.4.6 | ScalarplxFcFiltOctets | read-only | mandatory | Filtered bytes. |
| 1.3.6.1.4.1.465.4.7 | ScalarplxFcFiltPkts | read-only | mandatory | Filtered frames. |
| 1.3.6.1.4.1.465.5 | NodeplxGenericHubTrap | The generic hub trap is sent when one of several changes occurs in the status of the agent. There are three conditions which may cause this: the addition or de… | ||
| 1.3.6.1.4.1.465.5 | NodeplxSystemCounters | |||
| 1.3.6.1.4.1.465.5.1 | ScalarplxSysMemFree | read-only | mandatory | Amount of memory free of a particular size. Instance is the memory block size. |
| 1.3.6.1.4.1.465.5.2 | ScalarplxSysMemAllocFail | read-only | mandatory | Number of times an allocation of a particular size was denied due to no buffers. Instance is the buffer size. |
| 1.3.6.1.4.1.465.5.3 | ScalarplxSysMemTotAllocFail | read-only | mandatory | Total number of memory allocation failures. |
| 1.3.6.1.4.1.465.5.4 | ScalarplxSysMemFreeFail | read-only | mandatory | Count of deallocation failures due to inconsistent function arguments. |
| 1.3.6.1.4.1.465.5.5 | ScalarplxSysMemAllocTooBig | read-only | mandatory | Number of times a memory allocation was denied because the buffer size was too large. |
| 1.3.6.1.4.1.465.5.6 | ScalarplxSysTimeToReset | read-write | mandatory | Amount of time (seconds) until the agent will reset. Setting this to any non-zero value will cause a reset. |
| 1.3.6.1.4.1.465.5.7 | ScalarplxSysPanicMesg | read-only | mandatory | The message printed on the console before the last system crash, or a probable cause of the last crash. |
| 1.3.6.1.4.1.465.5.8 | ScalarplxSysResetCount | read-only | mandatory | Number of times the device has been reset (not including power recycles). |
| 1.3.6.1.4.1.465.5.10 | ScalarplxSysSoftwareVersion | read-only | mandatory | The version of software currently functioning in the system. |
| 1.3.6.1.4.1.465.6 | NodeplxSecurityViolationTrap | The security violation trap is sent when an alarm occurs in the agent that indicates a configured security provision has been violated. In conjunture with the … | ||
| 1.3.6.1.4.1.465.6 | NodeplxSpanningTree | |||
| 1.3.6.1.4.1.465.6.1 | NodeplxStBridge | |||
| 1.3.6.1.4.1.465.6.1.1 | ScalarplxStBrName | read-write | mandatory | Printable bridge name. |
| 1.3.6.1.4.1.465.6.1.2 | ScalarplxStBrIdent | read-write | mandatory | Bridge identifier (8 bytes). |
| 1.3.6.1.4.1.465.6.1.3 | ScalarplxStBrMaxAge | read-write | mandatory | Bridge default 802.1 Max Age parameter. |
| 1.3.6.1.4.1.465.6.1.4 | ScalarplxStBrHelloTime | read-write | mandatory | Bridge default 802.1 Hello Time parameter. |
| 1.3.6.1.4.1.465.6.1.5 | ScalarplxStBrForwDelay | read-write | mandatory | Bridge default 802.1 Forward Delay parameter. |
| 1.3.6.1.4.1.465.6.1.6 | ScalarplxStBrIsRoot | read-only | mandatory | Flag indicating if the bridge is the root. |
| 1.3.6.1.4.1.465.6.1.7 | ScalarplxStBrIsDesig | read-only | mandatory | Flag indicating if the bridge is designated for a LAN. |
| 1.3.6.1.4.1.465.6.1.8 | ScalarplxStBrSpanAddr | read-only | mandatory | MAC address used by the Spanning Tree Protocol for sending and receiving Config and Topology change frames. |
| 1.3.6.1.4.1.465.6.1.9 | ScalarplxStBrPriority | read-write | mandatory | 802.1 Bridge Priority parameter. |
| 1.3.6.1.4.1.465.6.1.10 | ScalarplxStBrSTPDisabled | read-write | mandatory | Flag used to enable or disable 802.1 Spanning Tree Protocol operation. |
| 1.3.6.1.4.1.465.6.2 | NodeplxStRoot | |||
| 1.3.6.1.4.1.465.6.2.1 | ScalarplxStRtIdent | read-only | mandatory | Root 802.1 Bridge Identifier. |
| 1.3.6.1.4.1.465.6.2.2 | ScalarplxStRtCost | read-only | mandatory | Root path cost. |
| 1.3.6.1.4.1.465.6.2.3 | ScalarplxStRtPort | read-only | mandatory | Root port number. |
| 1.3.6.1.4.1.465.6.2.4 | ScalarplxStRtMaxAge | read-only | mandatory | Root 802.1 Max Age parameter. |
| 1.3.6.1.4.1.465.6.2.5 | ScalarplxStRtHelloTime | read-only | mandatory | Root 802.1 Hello Time parameter. |
| 1.3.6.1.4.1.465.6.2.6 | ScalarplxStRtForwDelay | read-only | mandatory | Root 802.1 Forward Delay parameter. |
| 1.3.6.1.4.1.465.6.3 | NodeplxStPort | |||
| 1.3.6.1.4.1.465.6.3.1 | ScalarplxStPrtState | read-write | mandatory | 802.1 Port State. |
| 1.3.6.1.4.1.465.6.3.2 | ScalarplxStPrtCost | read-only | mandatory | 802.1 Port cost parameter. |
| 1.3.6.1.4.1.465.6.3.3 | ScalarplxStPrtIsDesig | read-only | mandatory | Flag indicating if this port is designated. |
| 1.3.6.1.4.1.465.6.3.4 | ScalarplxStPrtIsRoot | read-only | mandatory | Flag indicating if this is the root port. |
| 1.3.6.1.4.1.465.6.3.5 | ScalarplxStPrtDesigRoot | read-only | mandatory | 802.1 Bridge Identifier of the Designated Root for this port. |
| 1.3.6.1.4.1.465.6.3.6 | ScalarplxStPrtDesigCost | read-only | mandatory | Designated cost for this port. |
| 1.3.6.1.4.1.465.6.3.7 | ScalarplxStPrtDesigBridge | read-only | mandatory | Designated bridge for this port. |
| 1.3.6.1.4.1.465.6.3.8 | ScalarplxStPrtDesigPort | read-only | mandatory | Designated port. |
| 1.3.6.1.4.1.465.6.3.9 | ScalarplxStPrtPriority | read-only | mandatory | Port priority. |
| 1.3.6.1.4.1.465.6.4 | NodeplxSpanTreeStats | |||
| 1.3.6.1.4.1.465.6.4.1 | ScalarplxStsTopoChanges | read-only | mandatory | Topology changes detected. |
| 1.3.6.1.4.1.465.6.4.2 | ScalarplxStsConfigTimeout | read-only | mandatory | Configuration timeouts. |
| 1.3.6.1.4.1.465.6.4.3 | ScalarplxStsPortDisable | read-only | mandatory | Count of port disables. |
| 1.3.6.1.4.1.465.6.4.4 | ScalarplxStsPortEnable | read-only | mandatory | Count of port enables. |
| 1.3.6.1.4.1.465.6.4.5 | ScalarplxStsInBadLen | read-only | mandatory | 802.1 frames received with bad length. |
| 1.3.6.1.4.1.465.6.4.6 | ScalarplxStsInUnknown | read-only | mandatory | 802.1 frames received with bad frame type. |
| 1.3.6.1.4.1.465.6.4.7 | ScalarplxStsIn8021Man | read-only | mandatory | 802.1 Management frames received (discarded by bridge). |
| 1.3.6.1.4.1.465.6.4.8 | ScalarplxStsInConfig | read-only | mandatory | 802.1 Config frames received. |
| 1.3.6.1.4.1.465.6.4.9 | ScalarplxStsInTopoChg | read-only | mandatory | 802.1 Topology change notification frames received. |
| 1.3.6.1.4.1.465.6.4.10 | ScalarplxStsOutConfig | read-only | mandatory | 802.1 Config frames sent. |
| 1.3.6.1.4.1.465.6.4.11 | ScalarplxStsOutTopoChg | read-only | mandatory | 802.1 Topology change notification frames sent. |
| 1.3.6.1.4.1.465.7 | NodeplxFilterRange | |||
| 1.3.6.1.4.1.465.7.1 | ScalarplxFrNumRange | read-write | mandatory | The maximum number of filter range table entries when read (GET). Set to zero to delete all filter range table entries. A set with any other value is ignored. |
| 1.3.6.1.4.1.465.7.2 | ScalarplxFrEntry | read-write | mandatory | Filter range table entry. Instance is the range table number (1 to plxFrNumRange). Each entry has the following format: uchar frLowDest[6]; /* low bound of des… |
| 1.3.6.1.4.1.465.9 | NodeplxPlexcomProp | |||
| 1.3.6.1.4.1.465.9.1 | ScalarplxPlexAsync | read-write | mandatory | Plexcom 8090 proprietary management frame. Instance is '0'. This info is available in published form by using the 'plxHub' variables. |
| 1.3.6.1.4.1.465.9.2 | ScalarplxPlexStat | read-only | mandatory | Status of Plexcom 8090 management module as deduced by response to poll. Instance is '0'. |
| 1.3.6.1.4.1.465.9.3 | ScalarplxPlexBkBits | read-write | mandatory | Plexcom 8091 proprietary management frame. Instance is '0'. This info is available in a decoded form by using the 'plxHub' variables. Structure for SET (size 1… |
| 1.3.6.1.4.1.465.9.4 | ScalarplxPlexBkDef | read-write | mandatory | Plexcom module definition. Instance is module type, 'plxGroupType'. |
| 1.3.6.1.4.1.465.10 | NodeplxHub | |||
| 1.3.6.1.4.1.465.10.1 | TableplxHmBasicHubTable | not-accessible | mandatory | Table containing global info for a hub. |
| 1.3.6.1.4.1.465.10.1.1 | RowplxHmBasicHubEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.465.10.1.1.1 | ColumnplxHubBasicID | read-only | mandatory | Hub ID (MAC address of management port). |
| 1.3.6.1.4.1.465.10.1.1.2 | ColumnplxHubGroupCapacity | read-only | mandatory | The number of slots available in the hub. |
| 1.3.6.1.4.1.465.10.1.1.3 | ColumnplxHubGroupMap | read-only | mandatory | A sequence of bytes defining which hub slots are populated with groups (cards or groups). The first byte of the sequence represents slot 1, the second byte slo… |
| 1.3.6.1.4.1.465.10.1.1.4 | ColumnplxHubGroupCount | read-only | mandatory | The number of groups currently active in the hub. |
| 1.3.6.1.4.1.465.10.2 | TableplxHmBasicGroupTable | not-accessible | mandatory | A table of info for each hub module. |
| 1.3.6.1.4.1.465.10.2.1 | RowplxHmBasicGroupEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.465.10.2.1.1 | ColumnplxGroupHubBasicID | read-only | mandatory | Hub identifier (MAC address of management port). |
| 1.3.6.1.4.1.465.10.2.1.2 | ColumnplxGroupBasicID | read-only | mandatory | Group identifier (module or slot number). First (left/bottom) slot is 1. |
| 1.3.6.1.4.1.465.10.2.1.3 | ColumnplxGroupNumberOfPorts | read-only | mandatory | Number of ports in this group. |
| 1.3.6.1.4.1.465.10.2.1.4 | ColumnplxGroupType | read-only | mandatory | Group (module) type. |
| 1.3.6.1.4.1.465.10.2.1.5 | ColumnplxGroupAutoPartState | read-only | mandatory | A sequence of bytes defining the auto-partition state of each port. The first byte corresponds to port 1, the second byte to port 2, etc. The value of each ele… |
| 1.3.6.1.4.1.465.10.2.1.6 | ColumnplxGroupAdminState | read-write | mandatory | A sequence of bytes defining the enable state of each port. The first byte corresponds to port 1, the second byte to port 2, etc. The value of each element is … |
| 1.3.6.1.4.1.465.10.2.1.7 | ColumnplxGroupCascadeConfig | read-only | mandatory | An integer defining the configuration control of bussed cascade networks. For PlexNet SX products, this variable is only applicable to 23SX, 24SX, 27SX, etc. m… |
| 1.3.6.1.4.1.465.10.2.1.8 | ColumnplxGroupCascadeNetwork | read-write | mandatory | A sequence of bytes defining the selected bussed cascade network. A value of '9' indicates no cascade network selected. This can be SET only on device types. A… |
| 1.3.6.1.4.1.465.10.2.1.9 | ColumnplxGroupLinkState | read-only | mandatory | A sequence of bytes defining the link state of each port. The first byte corresponds to port 1, the second byte to port 2, etc. The value of each element is of… |
| 1.3.6.1.4.1.465.10.2.1.10 | ColumnplxGroupLinkPartTrapEnable | read-write | mandatory | A sequence of bytes defining the enabling state for generation of link and partition change traps from each port. The first byte corresponds to port 1, the sec… |
| 1.3.6.1.4.1.465.10.2.1.11 | ColumnplxGroupNetworkSegment | read-only | mandatory | The network segment that the corresponding group is currently operating on. This is the 'repeater' number used when accessing statistical information from the … |
| 1.3.6.1.4.1.465.10.2.1.12 | ColumnplxGroupChassisNo | read-only | mandatory | The number or id of the physical enclosure that the corresponding group is operating in. This variable maps a logical grouping of ports into a physical groupin… |
| 1.3.6.1.4.1.465.10.3 | TableplxHmBasicPortTable | not-accessible | mandatory | A table of info for the ports within a hub module. The instance of each element is 'GroupID.PortID'. For example, the Admin State of port 3 of slot 2 is 'plxPo… |
| 1.3.6.1.4.1.465.10.3.1 | RowplxHmBasicPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.465.10.3.1.1 | ColumnplxPortHubBasicID | read-only | mandatory | Hub identifier (MAC address of management port). |
| 1.3.6.1.4.1.465.10.3.1.2 | ColumnplxPortGroupBasicID | read-only | mandatory | Group identifier (module or slot number). First slot is 1. |
| 1.3.6.1.4.1.465.10.3.1.3 | ColumnplxPortBasicID | read-only | mandatory | Port identifier (number). First port is the leftmost or topmost port of a card and is number 1. |
| 1.3.6.1.4.1.465.10.3.1.4 | ColumnplxPortMauType | read-only | mandatory | Port physical interface type. |
| 1.3.6.1.4.1.465.10.3.1.5 | ColumnplxPortAdminState | read-write | mandatory | Port enable state. |
| 1.3.6.1.4.1.465.10.3.1.6 | ColumnplxPortAutoPartState | read-only | mandatory | Port auto-partition state. |
| 1.3.6.1.4.1.465.10.3.1.7 | ColumnplxPortLinkState | read-only | mandatory | Port link state. |
| 1.3.6.1.4.1.465.11 | NodeplxSystemAdmin | |||
| 1.3.6.1.4.1.465.11.1 | TableplxSysAdmCommunityTable | not-accessible | mandatory | A table of SNMP community name entries allowing different levels of SNMP access. A maximum of 5 entries are allowed. |
| 1.3.6.1.4.1.465.11.1.1 | RowplxSysAdmCommunityEntry | not-accessible | mandatory | An entry in the SNMP community table. |
| 1.3.6.1.4.1.465.11.1.1.1 | ColumnplxCommunityIndex | read-only | mandatory | A unique index for this community table entry. |
| 1.3.6.1.4.1.465.11.1.1.2 | ColumnplxCommunityName | read-write | mandatory | The community name to which this entry grants access. This string must be unique among the community names defined in all entries of this table. A community na… |
| 1.3.6.1.4.1.465.11.1.1.3 | ColumnplxCommunityAccess | read-write | mandatory | The access level for the community name. This variable must be set to a value of readOnly(1), readWrite(2), or superUser(3) for the corresponding plxCommunityN… |
| 1.3.6.1.4.1.465.11.2 | NodeplxSysAdmDownload | |||
| 1.3.6.1.4.1.465.11.2.1 | ScalarplxDownloadFileName | read-write | mandatory | Name of the file to download via the network to Flash. |
| 1.3.6.1.4.1.465.11.2.2 | ScalarplxDownloadServerAddress | read-write | mandatory | The IP address of the server that contains the file to download. |
| 1.3.6.1.4.1.465.11.2.3 | ScalarplxDownloadAction | read-write | mandatory | Setting this object to download(2) initiates a download of system software. The variables plxDownloadServerAddress and plxDownloadFileName must be first set be… |
| 1.3.6.1.4.1.465.11.2.4 | ScalarplxDownloadStatus | read-only | mandatory | The status of the last download performed. The value downloadSuccess(1) indicates a successful download, and that the device is operating from the downloaded f… |
| 1.3.6.1.4.1.465.11.3 | TableplxSysAdmTrapTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.465.11.3.1 | RowplxSysAdmTrapEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.465.11.3.1.1 | ColumnplxTrapIndex | read-only | mandatory | This object identifies the entry within the trap table. |
| 1.3.6.1.4.1.465.11.3.1.4 | ColumnplxTrapStandardEnable | read-write | mandatory | Enable or disable generation of standard traps for this entry. |
| 1.3.6.1.4.1.465.11.3.1.5 | ColumnplxTrapPlexcomEnable | read-write | mandatory | Enable or disable Plexcom specific trap generation for this entry. |
| 1.3.6.1.4.1.465.11.3.1.6 | ColumnplxTrapRepeaterEnable | read-write | mandatory | Enable or disable Repeater MIB specific trap generation for this entry. |
| 1.3.6.1.4.1.465.11.3.1.7 | ColumnplxTrapNovellEnable | read-write | mandatory | Enable or disable Novell HMI MIB specific trap generation for this entry. |
| 1.3.6.1.4.1.465.11.4 | NodeplxSysAdmMibControl | |||
| 1.3.6.1.4.1.465.11.4.1 | ScalarplxMcZeroStatCounters | read-write | mandatory | Zero statistical counters maintained by the managed device. This zeros the port- and network-level performance stats maintained in all MIBs supported by the de… |
| 1.3.6.1.4.1.465.11.4.2 | ScalarplxMcNetworkSelectRptrMib | read-write | mandatory | Select the 'repeater number' that the information in the Repeater MIB on the managed device represents. This variable is used for agents which manage multiple … |
| 1.3.6.1.4.1.465.11.4.3 | ScalarplxMcNetworkSelectRmonMib | read-write | mandatory | Select the 'repeater number' that the information in the RMON MIB on the managed device represents. This variable is used for agents which manage multiple repe… |
| 1.3.6.1.4.1.465.12 | NodeplxSecurity | |||
| 1.3.6.1.4.1.465.12.1 | TableplxIntruderControlGroupTable | not-accessible | mandatory | A table of parameters for configuring software-controlled intruder detection for groups of ports. |
| 1.3.6.1.4.1.465.12.1.1 | RowplxIntruderControlGroupEntry | not-accessible | mandatory | An entry in the intruder detection group table. |
| 1.3.6.1.4.1.465.12.1.1.1 | ColumnplxIcGroupGroupIndex | read-only | mandatory | A unique group index for which this intruder control table entry represents. |
| 1.3.6.1.4.1.465.12.1.1.2 | ColumnplxIcGroupAuthorizationType | read-write | mandatory | The authorization level of the intruder detection on the corresponding group of ports. If set to singleUser(2) (the initial default), alarms will be triggered … |
| 1.3.6.1.4.1.465.12.1.1.3 | ColumnplxIcGroupAlarmAction | read-write | mandatory | The action to be taken when an alarm occurs on any port in the corresponding group. If this variable is set to trapOnly(2), the initial default, an SNMP trap w… |
| 1.3.6.1.4.1.465.12.1.1.4 | ColumnplxIcGroupAuthorizedAddressMode | read-write | mandatory | The method by which the plxIcAuthorizedSourceAddress variable for the corresponding port should be configured. If this variable is set to autoLearn(1), the ini… |
| 1.3.6.1.4.1.465.12.1.1.5 | ColumnplxIcGroupDetectionStatus | read-write | mandatory | The current status of the intruder detection on the corresponding port. The initial default for all ports is inactive(1), meaning that intruder detection is no… |
| 1.3.6.1.4.1.465.12.2 | TableplxIntruderControlTable | not-accessible | mandatory | A table of parameters for configuring software-controlled intruder detection. |
| 1.3.6.1.4.1.465.12.2.1 | RowplxIntruderControlEntry | not-accessible | mandatory | An entry in the intruder detection table. |
| 1.3.6.1.4.1.465.12.2.1.1 | ColumnplxIcGroupIndex | read-only | mandatory | A unique group index for which this intruder control table entry represents. |
| 1.3.6.1.4.1.465.12.2.1.2 | ColumnplxIcPortIndex | read-only | mandatory | A unique port index for which this intruder control table entry represents. |
| 1.3.6.1.4.1.465.12.2.1.3 | ColumnplxIcAuthorizationType | read-write | mandatory | The authorization level of the intruder detection on the corresponding port. If set to singleUser(2) (the initial default), an alarm will be triggered when mor… |
| 1.3.6.1.4.1.465.12.2.1.4 | ColumnplxIcAlarmAction | read-write | mandatory | The action to be taken when an alarm occurs on the corresponding port. If this variable is set to trapOnly(2), the initial default, an SNMP trap will be genera… |
| 1.3.6.1.4.1.465.12.2.1.5 | ColumnplxIcAuthorizedAddressMode | read-write | mandatory | The method by which the plxIcAuthorizedSourceAddress variable for the corresponding port should be configured. If this variable is set to autoLearn(1), the ini… |
| 1.3.6.1.4.1.465.12.2.1.6 | ColumnplxIcAuthorizedSourceAddress | read-write | mandatory | The current authorized source address allowed by intruder detection on the corresponding port. This variable is only valid if the plxIcAuthorizationType variab… |
| 1.3.6.1.4.1.465.12.2.1.7 | ColumnplxIcCurrentSourceAddress | read-only | mandatory | The source address of the last valid packet that was generated on the corresponding port. If an alarm was generated on the port and the port was disabled based… |
| 1.3.6.1.4.1.465.12.2.1.8 | ColumnplxIcDetectionStatus | read-write | mandatory | The current status of the intruder detection on the corresponding port. The initial default for all ports is inactive(1), meaning that intruder detection is no… |