PORT-MIB
225 objects
The MIB module for cards in coriolis boxes
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5812.0 | NodeportPhyStatusChange | Change in the operational status of a port, 1 means the port came up, 2 means it went down | ||
| 1.3.6.1.4.1.5812.1 | NodeportAdminStatusChange | Change in the admin status of a port, 1 means the port came up, 2 means it went down | ||
| 1.3.6.1.4.1.5812.3.1 | IdentityportMIB | The MIB module for cards in coriolis boxes | ||
| 1.3.6.1.4.1.5812.3.2 | TableportTable | not-accessible | current | The port table. This contains the portNo variable, which is used as an index into specific port tables |
| 1.3.6.1.4.1.5812.3.2.1 | RowportEntry | not-accessible | current | Entry containing the portNo variable |
| 1.3.6.1.4.1.5812.3.2.1.1 | ColumnportNo | not-accessible | current | The purpose of this variable is to be used as index into tables |
| 1.3.6.1.4.1.5812.3.2.1.2 | Columnmib2IfIndex | read-only | current | This variable serves to identify the slot and port number. |
| 1.3.6.1.4.1.5812.3.3 | TableetherPortTable | not-accessible | current | The ethernet port table. This table contains information about the ethernet ports in this device. |
| 1.3.6.1.4.1.5812.3.3.1 | RowetherPortEntry | not-accessible | current | Entry containing information about ethernet ports |
| 1.3.6.1.4.1.5812.3.3.1.1 | ColumnetherPortSpeedCfg | read-write | current | The desired port speed if Autonegotiation is disabled. Management control of the port speed can also be accomplished through the MAU MIB via ifMauDefaultType. … |
| 1.3.6.1.4.1.5812.3.3.1.2 | ColumnetherPortSpeedStatus | read-write | current | The speed of the port. If autoneg is enabled, this is determined by the results of the autoneg process. If autoneg is disabled, this is the same as IfAdminSpee… |
| 1.3.6.1.4.1.5812.3.3.1.3 | ColumnetherPortDuplexCfg | read-write | current | The desired duplex mode of operation of the MAC entity if Autonegotiation is disabled. Management control of the duplex mode can also be accomplished through t… |
| 1.3.6.1.4.1.5812.3.3.1.4 | ColumnetherPortLoopback | read-write | current | Enables/disables loopback mode. |
| 1.3.6.1.4.1.5812.3.3.1.5 | ColumnetherPortPhyReset | read-write | current | Ethernet port phy reset |
| 1.3.6.1.4.1.5812.3.3.1.6 | ColumnetherPortStatsTxPkts64Octets | read-only | current | Total 64 byte packets transmitted on ethernet port. |
| 1.3.6.1.4.1.5812.3.3.1.7 | ColumnetherPortStatsTxPkts65to127Octets | read-only | current | The total number of packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including F… |
| 1.3.6.1.4.1.5812.3.3.1.8 | ColumnetherPortStatsTxPkts128to255Octets | read-only | current | The total number of packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including … |
| 1.3.6.1.4.1.5812.3.3.1.9 | ColumnetherPortStatsTxPkts256to511Octets | read-only | current | The total number of packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including … |
| 1.3.6.1.4.1.5812.3.3.1.10 | ColumnetherPortStatsTxPkts512to1023Octets | read-only | current | The total number of packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including… |
| 1.3.6.1.4.1.5812.3.3.1.11 | ColumnetherPortStatsTxPkts1024to1518Octets | read-only | current | The total number of packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but includin… |
| 1.3.6.1.4.1.5812.3.3.1.12 | ColumnetherPortStatsTxPkts1519to1530Octets | read-only | current | The total number of packets (including bad packets) transmitted that were between 1519 and 1530 octets in length inclusive (excluding framing bits but includin… |
| 1.3.6.1.4.1.5812.3.3.1.13 | ColumnetherPortStatsTxFCSErrors | read-only | current | Total packets transmitted on ethernet port with FCS errors (if MAC generates the FCS, this can never be incremented). |
| 1.3.6.1.4.1.5812.3.3.1.14 | ColumnetherPortStatsTxOversize | read-only | current | Number of frames transmitted greater than 1518 bytes. |
| 1.3.6.1.4.1.5812.3.3.1.15 | ColumnetherPortStatsTxUndersize | read-only | current | Number of packets less than 64 bytes transmitted. |
| 1.3.6.1.4.1.5812.3.3.1.16 | ColumnetherPortStatsTxControlFrames | read-only | current | Number of control frames transmitted. |
| 1.3.6.1.4.1.5812.3.3.1.17 | ColumnetherPortStatsTxBadFifoUnderrun | read-only | current | Number of bad frames (due to Transmit FIFO underrun) transmitted. |
| 1.3.6.1.4.1.5812.3.3.1.18 | ColumnetherPortStatsTxBadFifoOverrun | read-only | current | Number of bad frames (due to Transmit FIFO overrun) transmitted. |
| 1.3.6.1.4.1.5812.3.3.1.19 | ColumnetherPortStatsTxDropFifoOverrun | read-only | current | Number of frames dropped due to Transmit FIFO underrun. |
| 1.3.6.1.4.1.5812.3.3.1.20 | ColumnetherPortStatsTxBadParityError | read-only | current | Number of bad frames (due to parity error) transmitted. |
| 1.3.6.1.4.1.5812.3.3.1.21 | ColumnetherPortStatsTxDropParityError | read-only | current | Number of bad frames (due to parity error) dropped. |
| 1.3.6.1.4.1.5812.3.3.1.22 | ColumnetherPortStatsTxBadSequenceError | read-only | current | Number of bad frames (due to frame Sequence Error) transmitted. |
| 1.3.6.1.4.1.5812.3.3.1.23 | ColumnetherPortStatsTxDropSequenceError | read-only | current | Number of bad frames (due to frame Sequence Error) dropped. |
| 1.3.6.1.4.1.5812.3.3.1.24 | ColumnetherPortStatsTxBadJamError | read-only | current | Number of bad frames (due to Jam Bit Error) transmitted. |
| 1.3.6.1.4.1.5812.3.3.1.25 | ColumnetherPortStatsTxDropJamError | read-only | current | Number of bad frames (due to Jam Bit Error) dropped. |
| 1.3.6.1.4.1.5812.3.3.1.26 | ColumnetherPortSpeedTrapEnable | read-write | current | Indicates whether portSpeedTrap traps should be generated for this interface. |
| 1.3.6.1.4.1.5812.3.3.1.27 | ColumnetherPortDuplexTrapEnable | read-write | current | Ethernet port duplex trap enable |
| 1.3.6.1.4.1.5812.3.3.1.28 | ColumnetherPortAutonegTrapEnable | read-write | current | Indicates whether autoNegCompleteTrap traps should be generated for this interface. |
| 1.3.6.1.4.1.5812.3.3.1.29 | ColumnetherPortRowStatus | read-write | current | This variable is used to create or delete instances of ethernet ports This variable subsumes the admin state variable, and once the row is created, its value r… |
| 1.3.6.1.4.1.5812.3.3.1.30 | ColumnetherPortAutonegAdvSpeed | read-write | current | This specifies what speed capability is advertised for autonegotiation. If 100 MBPS is set, then 10 MBPS is also advertised.This does not apply to Gig Ethernet… |
| 1.3.6.1.4.1.5812.3.3.1.31 | ColumnetherPortAutonegAdvDuplex | read-write | current | This specifies what duplex capability is advertised for autonegotiation. If Full Duplex is set, then Half Duplex is also adveetised.This does not apply to Gig … |
| 1.3.6.1.4.1.5812.3.3.1.32 | ColumnetherPortPauseStateReceived | read-only | current | The PAUSE mode received from the remote device, as read from the Auto Negotiation Partner Ability GMII Register of the PHY.If autoNegotiation is not enabled an… |
| 1.3.6.1.4.1.5812.3.3.1.33 | ColumnetherPortVlanMode | read-write | current | Specifies the VLAN mode for the port |
| 1.3.6.1.4.1.5812.3.3.1.34 | ColumnetherPortDefaultVlanId | read-write | current | Specifies what the default Vlan Id is for the port. This is used on ingress only if vlanMode is Enabled and a frame is received either untagged or tagged with … |
| 1.3.6.1.4.1.5812.3.3.1.35 | ColumnetherPortRxOverrun | read-only | current | The total number of packets dropped by the GMAC due to the occurence of a receive overrun (gig only- supported by GMAC-D2 and later) |
| 1.3.6.1.4.1.5812.3.3.1.36 | ColumnetherPortRxSyncErrors | read-only | current | The total number of packets dropped due to loss of sync during packet reception. (GIG only- supported by GMAC-D2 and later) |
| 1.3.6.1.4.1.5812.3.3.1.37 | ColumnetherPortRxDelSeqErrors | read-only | current | The total number of packets dropped due to delimiter sequence errors as detected by the GMAC during packet reception. (GIG only- supported by GMAC-D2 and later) |
| 1.3.6.1.4.1.5812.3.3.1.38 | ColumnetherPortRxFifoOverrunErrors | read-only | current | The total number of packets dropped by the GMAC due to the occurence of a receive FIFO overrun (gig only- supported by GMAC-D2 and later) |
| 1.3.6.1.4.1.5812.3.3.1.39 | ColumnetherPortRxControlFrames | read-only | current | Number of control frames received by this port |
| 1.3.6.1.4.1.5812.3.3.1.40 | ColumnetherPortRxThreshOvrszFrames | read-only | current | The total number of threshold oversized frames received by the GMAC (gig only - supported by GMAC-D2 and later) |
| 1.3.6.1.4.1.5812.3.3.1.41 | ColumnetherPortStatsRxPkts1519to1530Octets | read-only | current | The total number of packets (including bad packets) received that were between 1519 and 1530 octets in length inclusive (excluding framing bits but including F… |
| 1.3.6.1.4.1.5812.3.4 | TabletdmIoDS1PortTable | not-accessible | current | The DS1 TDM IO Port Table |
| 1.3.6.1.4.1.5812.3.4.1 | RowtdmIoDS1PortEntry | not-accessible | current | Entry containing information about TDM IO DS1 ports |
| 1.3.6.1.4.1.5812.3.4.1.1 | ColumntdmIoDS1PortType | read-write | current | The type of TDM IO DS1 port |
| 1.3.6.1.4.1.5812.3.4.1.2 | ColumntdmIoDS1PortTiming | read-write | current | Clock source for the DS1 port 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clo… |
| 1.3.6.1.4.1.5812.3.4.1.5 | ColumntdmIoDS1PortBuildOut | read-write | current | Line Build Out for Signal Strength. For short haul, a distance (in feet) is chosen. For long haul, an attenuation strength is chosen in Decibels. |
| 1.3.6.1.4.1.5812.3.4.1.6 | ColumntdmIoDS1PortFraming | read-only | current | Framing type implemented for this interface. |
| 1.3.6.1.4.1.5812.3.4.1.7 | ColumntdmIoDS1PortCoding | read-write | current | The type of Zero Code Suppression used on this interface. B8ZS refers to the use of a specified pattern of normal bits and bipolar violations which are used to… |
| 1.3.6.1.4.1.5812.3.4.1.8 | ColumntdmIoDS1PortLoopbackState | read-only | current | This object indicates the state of loopback on this interface. 'Idle' indicates that there is no loopback running and 'running' indicates that this interface i… |
| 1.3.6.1.4.1.5812.3.4.1.9 | ColumntdmIoDS1PortLoopbackType | read-write | current | This object indicates the type of loopback on this interface. noLoop - the interface is not in loopBack mode. localOn - the interface is running in internal lo… |
| 1.3.6.1.4.1.5812.3.4.1.10 | ColumntdmIoDS1PortLoopbackResults | read-only | current | Results from previous loopback on this port |
| 1.3.6.1.4.1.5812.3.4.1.11 | ColumntdmIoDS1PortLoopbackLLbActCode | read-write | current | User code to enable Automatic Remote Loopback(ARL) |
| 1.3.6.1.4.1.5812.3.4.1.12 | ColumntdmIoDS1PortLoopbackLLbDeactCode | read-write | current | User code to disable Automatic Remote Loopback(ARL) |
| 1.3.6.1.4.1.5812.3.4.1.13 | ColumntdmIoDS1PortLoopbackLlbActCodeLen | read-write | current | Length of user code to enable Automatic Remote Loopback(ARL) |
| 1.3.6.1.4.1.5812.3.4.1.14 | ColumntdmIoDS1PortLoopbackLlbDeactCodeLen | read-write | current | Length of user code to disable Automatic Remote Loopback(ARL) |
| 1.3.6.1.4.1.5812.3.4.1.15 | ColumntdmIoDS1PortLoopbackLlbControl | read-write | current | LLBCODE(activate/deactivate) generation/monitoring control |
| 1.3.6.1.4.1.5812.3.4.1.16 | ColumntdmIoDS1PortLoopbackLlbGenPath | read-write | current | The path (xmit/rcv) for LLBCODE generation |
| 1.3.6.1.4.1.5812.3.4.1.17 | ColumntdmIoDS1PortLoopbackLlbMonPath | read-write | current | The path (xmit/rcv) for LLBCODE monitoring |
| 1.3.6.1.4.1.5812.3.4.1.18 | ColumntdmIoDS1PortPrbsAlgorithm | read-write | current | The PRBS Algorithm |
| 1.3.6.1.4.1.5812.3.4.1.19 | ColumntdmIoDS1PortPrbsInversion | read-only | current | Whether the PRBS stream will be inverted |
| 1.3.6.1.4.1.5812.3.4.1.20 | ColumntdmIoDS1PortPrbsGenPath | read-write | current | The PRBS generator path |
| 1.3.6.1.4.1.5812.3.4.1.21 | ColumntdmIoDS1PortPrbsMonPath | read-write | current | The PRBS monitor path |
| 1.3.6.1.4.1.5812.3.4.1.22 | ColumntdmIoDS1PortPrbsMonitor | read-write | current | PRBS monitor - is it off or on? |
| 1.3.6.1.4.1.5812.3.4.1.23 | ColumntdmIoDS1PortPrbsTransmit | read-write | current | PRBS or normal transmission on transmission line |
| 1.3.6.1.4.1.5812.3.4.1.24 | ColumntdmIoDS1PortPrbsBec | read-only | current | The PRBS bit error counter |
| 1.3.6.1.4.1.5812.3.4.1.25 | ColumntdmIoDS1PortBertState | read-only | current | User specified BERT status |
| 1.3.6.1.4.1.5812.3.4.1.26 | ColumntdmIoDS1PortBertPattern | read-write | current | User specified BERT type |
| 1.3.6.1.4.1.5812.3.4.1.27 | ColumntdmIoDS1PortBertDuration | read-write | current | User specified BERT duration |
| 1.3.6.1.4.1.5812.3.4.1.28 | ColumntdmIoDS1PortBertResults | read-only | current | Results from previous BERT test on this port |
| 1.3.6.1.4.1.5812.3.4.1.29 | ColumntdmIoDS1PortLineESS15Min | read-write | current | The 15 minute Line Errored Seconds Threshold |
| 1.3.6.1.4.1.5812.3.4.1.30 | ColumntdmIoDS1PortPathESS15Min | read-write | current | The 15 minute Path Errored Seconds Threshold |
| 1.3.6.1.4.1.5812.3.4.1.31 | ColumntdmIoDS1PortLineESS1Day | read-write | current | The 1 Day Line Errored Seconds Threshold |
| 1.3.6.1.4.1.5812.3.4.1.32 | ColumntdmIoDS1PortPathESS1Day | read-write | current | The 1 Day Path Errored Seconds Threshold |
| 1.3.6.1.4.1.5812.3.4.1.33 | ColumntdmIoDS1PortPathCVS15Min | read-write | current | The 15 minute Path Coding Violations Threshold |
| 1.3.6.1.4.1.5812.3.4.1.34 | ColumntdmIoDS1PortPathCVS1Day | read-write | current | The 1 day Path Coding Violations Threshold |
| 1.3.6.1.4.1.5812.3.4.1.35 | ColumntdmIoDS1PortPathSESS15Min | read-write | current | The 15 minute Path Severely Errored Seconds Threshold |
| 1.3.6.1.4.1.5812.3.4.1.36 | ColumntdmIoDS1PortPathSESS1Day | read-write | current | The 1 day Path Severely Errored Seconds Threshold |
| 1.3.6.1.4.1.5812.3.4.1.37 | ColumntdmIoDS1PortPathSASS15Min | read-write | current | The 15 minute Path AIS seconds Threshold |
| 1.3.6.1.4.1.5812.3.4.1.38 | ColumntdmIoDS1PortPathSASS1Day | read-write | current | The 1 day Path AIS seconds Threshold |
| 1.3.6.1.4.1.5812.3.4.1.39 | ColumntdmIoDS1PortPathCSS15Min | read-write | current | The 15 minute path controlled slip seconds threshold |
| 1.3.6.1.4.1.5812.3.4.1.40 | ColumntdmIoDS1PortPathCSS1Day | read-write | current | The 1 day path controlled slip seconds threshold |
| 1.3.6.1.4.1.5812.3.4.1.41 | ColumntdmIoDS1PortPathUASS15Min | read-write | current | The 15 minute path unavailable seconds threshold |
| 1.3.6.1.4.1.5812.3.4.1.42 | ColumntdmIoDS1PortRowStatus | read-write | current | This variable is used to create or delete instances of TDM IO DS1 ports. This variable subsumes the admin state variable, and once the row is created, its valu… |
| 1.3.6.1.4.1.5812.3.4.1.43 | ColumndsxStatus | accessible-for-notify | current | DSx line status. |
| 1.3.6.1.4.1.5812.3.4.1.44 | ColumntdmIoDS1PortLCVCount | read-only | current | Count of Line Code Violations. |
| 1.3.6.1.4.1.5812.3.5 | TablesonetPortTable | not-accessible | current | The proprietary SONET Port Table |
| 1.3.6.1.4.1.5812.3.5.1 | RowsonetPortEntry | not-accessible | current | Entry containing information about SONET ports |
| 1.3.6.1.4.1.5812.3.5.1.1 | ColumnsonetPortType | read-write | current | The type of SONET port |
| 1.3.6.1.4.1.5812.3.5.1.2 | ColumnsonetPortIdString | read-write | current | The identifier string for the SONET port |
| 1.3.6.1.4.1.5812.3.5.1.3 | ColumnsonetPortTiming | read-write | current | Clock source for the port |
| 1.3.6.1.4.1.5812.3.5.1.4 | ColumnsonetPortLoopback | read-write | current | The types of loopback available on the SONET interface. |
| 1.3.6.1.4.1.5812.3.5.1.5 | ColumnsonetPortScrambling | read-write | current | Whether port scrambling is enabled or disabled |
| 1.3.6.1.4.1.5812.3.5.1.6 | ColumnsonetPortChannelization | read-write | current | Whether the physical port is concatenated or not |
| 1.3.6.1.4.1.5812.3.5.1.7 | ColumnsonetPortConfigedChans | read-only | current | The channels configured on the port |
| 1.3.6.1.4.1.5812.3.5.1.8 | ColumnsonetPortSectESS15Min | read-write | current | 15 minute section errored seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.9 | ColumnsonetPortLineESS15Min | read-write | current | 15 minute line errored seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.10 | ColumnsonetPortPathESS15Min | read-write | current | 15 minute path errored seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.11 | ColumnsonetPortSectESS1Day | read-write | current | 1 day section errored seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.12 | ColumnsonetPortLineESS1Day | read-write | current | 1 day line errored seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.13 | ColumnsonetPortPathESS1Day | read-write | current | 1 day path errored seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.14 | ColumnsonetPortSectCVS15Min | read-write | current | 15 minute section coding violations threshold |
| 1.3.6.1.4.1.5812.3.5.1.15 | ColumnsonetPortLineCVS15Min | read-write | current | 15 minute line coding violations threshold |
| 1.3.6.1.4.1.5812.3.5.1.16 | ColumnsonetPortPathCVS15Min | read-write | current | 15 minutes path coding violations threshold |
| 1.3.6.1.4.1.5812.3.5.1.17 | ColumnsonetPortSectCVS1Day | read-write | current | 1 day section coding violations threshold |
| 1.3.6.1.4.1.5812.3.5.1.18 | ColumnsonetPortLineCVS1Day | read-write | current | 1 day line coding violations threshold |
| 1.3.6.1.4.1.5812.3.5.1.19 | ColumnsonetPortPathCVS1Day | read-write | current | 1 day path coding violations threshold |
| 1.3.6.1.4.1.5812.3.5.1.20 | ColumnsonetPortSectSESS15Min | read-write | current | 15 minutes section severely errored seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.21 | ColumnsonetPortLineSESS15Min | read-write | current | 15 minutes line severely errored seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.22 | ColumnsonetPortPathSESS15Min | read-write | current | 15 minutes path severely errored seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.23 | ColumnsonetPortSectSESS1Day | read-write | current | 1 day section severely errored seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.24 | ColumnsonetPortLineSESS1Day | read-write | current | 1 day line severely errored seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.25 | ColumnsonetPortPathSESS1Day | read-write | current | 1 day path severely errored seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.26 | ColumnsonetPortLineUASS15Min | read-write | current | 15 minutes line unavailable seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.27 | ColumnsonetPortPathUASS15Min | read-write | current | 15 minutes path unavailable seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.28 | ColumnsonetPortLineUASS1Day | read-write | current | 1 day line unavailable seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.29 | ColumnsonetPortPathUASS1Day | read-write | current | 1 day path unavailable seconds threshold |
| 1.3.6.1.4.1.5812.3.5.1.30 | ColumnsonetPortRowStatus | read-write | current | This variable is used to create or delete instances of SONET ports This variable subsumes the admin state variable, and once the row is created, its value retu… |
| 1.3.6.1.4.1.5812.3.5.1.31 | ColumnsonetTCAStatus | accessible-for-notify | current | Represents the Threshold Crossing Alarm. |
| 1.3.6.1.4.1.5812.3.6 | TableatmPortTable | not-accessible | current | The ATM Port Table |
| 1.3.6.1.4.1.5812.3.6.1 | RowatmPortEntry | not-accessible | current | Entry containing information about atm ports |
| 1.3.6.1.4.1.5812.3.6.1.1 | ColumnatmPortVPTunnel | read-write | current | Whether this port is a VP Tunnel |
| 1.3.6.1.4.1.5812.3.6.1.2 | ColumnatmPortMaxTotalBits | read-only | current | Max Total Bits of VPI & VCI |
| 1.3.6.1.4.1.5812.3.6.1.3 | ColumnatmPortTiming | read-write | current | Timing Mode |
| 1.3.6.1.4.1.5812.3.6.1.4 | ColumnatmPortInCells | read-only | current | Input Cell Count |
| 1.3.6.1.4.1.5812.3.6.1.5 | ColumnatmPortOutCells | read-only | current | Output Cell Count |
| 1.3.6.1.4.1.5812.3.6.1.6 | ColumnatmPortCDVT | read-write | current | Cell Delay Variation Tolerance (CDVT) is measured in units of seconds per cell. For OC12c ATM the link rate is approximately 1.4 million cells per second, each… |
| 1.3.6.1.4.1.5812.3.6.1.7 | ColumnatmPortMaxActvBits | read-write | current | Maximum active VPI/VCI bits |
| 1.3.6.1.4.1.5812.3.6.1.8 | ColumnatmPortHCInCells | read-only | current | 64 bit input cell count |
| 1.3.6.1.4.1.5812.3.6.1.9 | ColumnatmPortHCOutCells | read-only | current | 64 bit output cell count |
| 1.3.6.1.4.1.5812.3.6.1.10 | ColumnatmPortRowStatus | read-write | current | This variable is used to create or delete instances of atm ports This variable subsumes the admin state variable, and once the row is created, its value return… |
| 1.3.6.1.4.1.5812.3.7 | TableopticalPortTable | not-accessible | current | The Optical Port Table |
| 1.3.6.1.4.1.5812.3.7.1 | RowopticalPortEntry | not-accessible | current | This describes the attributes of optical ports in the system |
| 1.3.6.1.4.1.5812.3.7.1.1 | Columnlambda | not-accessible | current | The purpose of this variable is to be used as the third component of the index into the optical port table |
| 1.3.6.1.4.1.5812.3.7.1.2 | ColumnopticalPortMode | read-write | current | The mode of operation of the port. This is set initially by the user and can only be changed by the user. It is not a status. By default, all optical ports in … |
| 1.3.6.1.4.1.5812.3.7.1.3 | ColumnopticalPortRxSMselect | not-accessible | current | This object selects which lambda to send over the back-plane to the different switch module. |
| 1.3.6.1.4.1.5812.3.7.1.4 | ColumnopticalPortTxSMselect | read-write | current | Selects between lambda feeds on the back plane wich originate in different switch module. |
| 1.3.6.1.4.1.5812.3.7.1.5 | ColumnopticalPortRxSignalState | read-only | current | Provides the status of the received optical signal - whether it is detected or not. |
| 1.3.6.1.4.1.5812.3.7.1.6 | ColumnopticalPortRxFrameState | read-only | current | Frame state of signal as detected by SW at SONET framer. This state is auto set by software. |
| 1.3.6.1.4.1.5812.3.7.1.7 | ColumnopticalPortTxStatus | read-only | current | Provides the status of the transmitter for the optical port. This provides the operational condition of the transmitter. The value of it could be 'Good' even t… |
| 1.3.6.1.4.1.5812.3.7.1.8 | ColumnopticalPortTxEnable | read-write | current | Whether the transmission of data and interrupts on the optical port is enabled or disabled |
| 1.3.6.1.4.1.5812.3.7.1.9 | ColumnopticalPortLaserPowerLevel | not-accessible | current | The laser power level on the port - this variable is useful for tunable lasers. Currently will return a value of high(1) |
| 1.3.6.1.4.1.5812.3.7.1.10 | ColumnopticalPortLaserWavelength | read-write | current | Laser wavelength on the optical port. Currently will return 1 for DWDM ports, 2 for 1310 ports, 3 for 1550 ports and 4 for ports that support both 1310 and 155… |
| 1.3.6.1.4.1.5812.3.7.1.11 | ColumnopticalPortRowStatus | read-write | current | This variable is used to create or delete instances of optical port |
| 1.3.6.1.4.1.5812.3.8 | TableringPortTable | not-accessible | current | A table containing ring port variables. |
| 1.3.6.1.4.1.5812.3.8.1 | RowringPortEntry | not-accessible | current | Entry in the table for a single ring port. |
| 1.3.6.1.4.1.5812.3.8.1.1 | ColumnringPortArbiterEnabled | read-write | current | The arbiter enabled Boolean defines whether the ring port Arbitration Logic is enabled or not. The Arbitration Logic services requests for extra data columns f… |
| 1.3.6.1.4.1.5812.3.8.1.2 | ColumnringPortFrameMode | read-write | current | The frame mode defines the data path mode of the ring port. The choices include AXSON and POS. AXSON frame mode means the ring encapsulates data inside AXSON f… |
| 1.3.6.1.4.1.5812.3.8.1.3 | ColumnringPortMaxChannels | read-write | current | The max channels parameter sizes the number of AxSON channels supported on the ring port. This determines number of ingress and egress queues and the amount of… |
| 1.3.6.1.4.1.5812.3.8.1.4 | ColumnringPortMaxSubChannels | read-write | current | The max sub-channels parameter sizes the number of AxSON sub-channels supported in a particular AxSON channel. This determines the amount of queue memory requi… |
| 1.3.6.1.4.1.5812.3.8.1.5 | ColumnringPortAutoQueueSizing | read-write | current | Defines whether Axson channel queues may be automatically resized during provisioning. |
| 1.3.6.1.4.1.5812.3.8.1.6 | ColumnringPortRingMode | read-write | current | Whether the ring port is connected to the working ring or the protected ring |
| 1.3.6.1.4.1.5812.3.8.1.7 | ColumnringPortNodeId | read-write | current | This defines the temporal discovery of the node in the logical ring |
| 1.3.6.1.4.1.5812.3.8.1.8 | ColumnringPortAdminStatus | read-write | current | Gives the possible ringPort Administration Status . |
| 1.3.6.1.4.1.5812.3.8.1.9 | ColumnringPortOperStatus | read-only | current | Gives the ringPortNodeId operational status of the AXSON interface . |
| 1.3.6.1.4.1.5812.3.8.1.10 | ColumnringPortRxFrames | read-only | current | This object sepcifies the number of frames received at this interface. |
| 1.3.6.1.4.1.5812.3.8.1.11 | ColumnringPortRxFrameErrors | read-only | current | Number of errored frames received at this interface. |
| 1.3.6.1.4.1.5812.3.8.1.12 | ColumnringPortTxFrames | read-only | current | This object sepcifies the number of frames transmitted from this interface. |
| 1.3.6.1.4.1.5812.3.8.1.13 | ColumnringPortMaxTDMChannels | read-write | current | The maximum number of TDM channels supported on the ring |
| 1.3.6.1.4.1.5812.3.8.1.14 | ColumnringPortK1K2Status | accessible-for-notify | current | The status indicated by the K1,K2 bytes in the SONET frame overhead |
| 1.3.6.1.4.1.5812.3.8.1.15 | ColumnringPortAISStatus | accessible-for-notify | current | The status indicated by the AIS bytes in the SONET frame overhead |
| 1.3.6.1.4.1.5812.3.8.1.16 | ColumnringPortPHYStatus | accessible-for-notify | current | The physical status of the ring port. |
| 1.3.6.1.4.1.5812.3.9 | TabletdmIoDS3PortTable | not-accessible | current | The DS3 TDM IO Port Table |
| 1.3.6.1.4.1.5812.3.9.1 | RowtdmIoDS3PortEntry | not-accessible | current | Entry containing information about TDM IO DS3 ports |
| 1.3.6.1.4.1.5812.3.9.1.1 | ColumntdmIoDS3PortPBitESS15Min | read-write | current | 15 minute threshold for P-Bit Errored Seconds |
| 1.3.6.1.4.1.5812.3.9.1.2 | ColumntdmIoDS3PortPBitESS1Day | read-write | current | 1 day threshold for P-Bit Errored Seconds |
| 1.3.6.1.4.1.5812.3.9.1.3 | ColumntdmIoDS3PortPBitSESS15Min | read-write | current | 15 minute threshold for P-Bit Severely Errored Seconds |
| 1.3.6.1.4.1.5812.3.9.1.4 | ColumntdmIoDS3PortPBitSESS1Day | read-write | current | 1 day threshold for P-Bit Severely Errored Seconds |
| 1.3.6.1.4.1.5812.3.9.1.5 | ColumntdmIoDS3PortSEFSS15Min | read-write | current | 15 minute threshold for Severely Errored Framing Seconds |
| 1.3.6.1.4.1.5812.3.9.1.6 | ColumntdmIoDS3PortSEFSS1Day | read-write | current | 1 day threshold for Severely Errored Framing Seconds |
| 1.3.6.1.4.1.5812.3.9.1.7 | ColumntdmIoDS3PortUASS15Min | read-write | current | 15 minute threshold for Severely Errored Framing Seconds |
| 1.3.6.1.4.1.5812.3.9.1.8 | ColumntdmIoDS3PortUASS1Day | read-write | current | 1 day threshold for Unavailable Seconds |
| 1.3.6.1.4.1.5812.3.9.1.9 | ColumntdmIoDS3PortLineCVS15Min | read-write | current | 15 minute threshold for Line-Coding Violations |
| 1.3.6.1.4.1.5812.3.9.1.10 | ColumntdmIoDS3PortLineCVS1Day | read-write | current | 1 day threshold for Line-Coding Violations |
| 1.3.6.1.4.1.5812.3.9.1.11 | ColumntdmIoDS3PortPBitCVS15Min | read-write | current | 15 minute threshold for P-Bit Coding Violations |
| 1.3.6.1.4.1.5812.3.9.1.12 | ColumntdmIoDS3PortPBitCVS1Day | read-write | current | 1 day threshold for P-Bit Coding Violations |
| 1.3.6.1.4.1.5812.3.9.1.13 | ColumntdmIoDS3PortLineESS15Min | read-write | current | 15 minute threshold for Line Errored Seconds |
| 1.3.6.1.4.1.5812.3.9.1.14 | ColumntdmIoDS3PortLineESS1Day | read-write | current | 1 day threshold for Line Errored Seconds |
| 1.3.6.1.4.1.5812.3.9.1.15 | ColumntdmIoDS3PortCBitCVS15Min | read-write | current | 15 minute threshold for C-Bit Coding Violations |
| 1.3.6.1.4.1.5812.3.9.1.16 | ColumntdmIoDS3PortCBitCVS1Day | read-write | current | 1 day threshold for C-Bit Coding Violations |
| 1.3.6.1.4.1.5812.3.9.1.17 | ColumntdmIoDS3PortCBitESS15Min | read-write | current | 15 minute threshold for C-Bit Errored Seconds |
| 1.3.6.1.4.1.5812.3.9.1.18 | ColumntdmIoDS3PortCBitESS1Day | read-write | current | 1 day threshold for C-Bit Errored Seconds |
| 1.3.6.1.4.1.5812.3.9.1.19 | ColumntdmIoDS3PortCBitSESS15Min | read-write | current | 15 minute threshold for C-Bit Severely Errored Seconds |
| 1.3.6.1.4.1.5812.3.9.1.20 | ColumntdmIoDS3PortCBitSESS1Day | read-write | current | 1 day threshold for C-Bit Severely Errored Seconds |
| 1.3.6.1.4.1.5812.3.9.1.21 | ColumntdmIoDS3PortRowStatus | read-write | current | This variable is used to create or delete instances of TDM IO DS3 ports. This variable subsumes the admin state variable, and once the row is created, its valu… |
| 1.3.6.1.4.1.5812.3.10 | TableposPortTable | not-accessible | current | The POS Port Table |
| 1.3.6.1.4.1.5812.3.10.1 | RowposPortEntry | not-accessible | current | Entry containing information about POS ports |
| 1.3.6.1.4.1.5812.3.10.1.1 | ColumnposPortTransportSegmentCount | read-only | current | Number of provisioned connections on port. |
| 1.3.6.1.4.1.5812.3.10.1.2 | ColumnposPortMode | read-write | current | mode of operation. |
| 1.3.6.1.4.1.5812.3.10.1.3 | ColumnposPortDefaultVID | read-write | current | Port's default VLAN ID. |
| 1.3.6.1.4.1.5812.3.10.1.4 | ColumnposPortMinPktSize | read-write | current | It is defined as the minimum number of bytes encapsulated in the POS frame including the FCS, but excluding byte stuffing. |
| 1.3.6.1.4.1.5812.3.10.1.5 | ColumnposPortMaxPktSize | read-write | current | It is defined as the maximum number of bytes encapsulated in the POS frame including the FCS, but excluding byte stuffing. |
| 1.3.6.1.4.1.5812.3.10.1.6 | ColumnposPortMinPktViolations | read-only | current | This object gives the number of times the system had detected a packet of size less than the acceptable minimum. |
| 1.3.6.1.4.1.5812.3.10.1.7 | ColumnposPortMaxPktViolations | read-only | current | This object gives the number of times the system had detected a packet of size greater than the acceptable minimum. |
| 1.3.6.1.4.1.5812.20 | NodeportSpeedStatusTrap | Change in speed of an interface e.g. 10 or 100 for a Fast Ethernet port | ||
| 1.3.6.1.4.1.5812.21 | NodeetherPortDuplexStatusTrap | Change in the duplex status of an ethernet port , 2 means half-duplex, 3 means full duplex | ||
| 1.3.6.1.4.1.5812.22 | NodeetherPortAutonegStatusTrap | Change in status of the autoneg process, 3 means it has completed | ||
| 1.3.6.1.4.1.5812.27 | NodesonetSectionLOSChange | Change in the SONET LOS status. | ||
| 1.3.6.1.4.1.5812.28 | NodesonetSectionLOFChange | Change in the SONET LOF status. | ||
| 1.3.6.1.4.1.5812.29 | NodesonetLineAISChange | Change in the SONET Line AIS status. | ||
| 1.3.6.1.4.1.5812.30 | NodesonetLineRDIChange | Change in the SONET Line RDI status. | ||
| 1.3.6.1.4.1.5812.31 | NodesonetPathLOPChange | Change in the SONET Path LOP status. | ||
| 1.3.6.1.4.1.5812.32 | NodesonetPathAISChange | Change in the SONET Path AIS status. | ||
| 1.3.6.1.4.1.5812.33 | NodesonetPathRDIChange | Change in the SONET Path RDI status. | ||
| 1.3.6.1.4.1.5812.34 | NodesonetPathUNEQPChange | Indicates whether the SONET path is equipped or not. | ||
| 1.3.6.1.4.1.5812.35 | NodesonetPathPSLMChange | Indicates if there is any mismatch in the SONET signal label. | ||
| 1.3.6.1.4.1.5812.36 | NodesonetVTLOPChange | Change in the SONET VT LOP status. | ||
| 1.3.6.1.4.1.5812.37 | NodesonetVTAISChange | Change in the SONET VT AIS status. | ||
| 1.3.6.1.4.1.5812.38 | NodesonetVTRDIChange | Change in the SONET VT RDI status. | ||
| 1.3.6.1.4.1.5812.39 | NodesonetVTRFIChange | Change in the SONET VT RFI status. | ||
| 1.3.6.1.4.1.5812.40 | NodesonetVTUNEQPChange | Indicates whether the SONET VT is equipped or not. | ||
| 1.3.6.1.4.1.5812.41 | NodesonetVTPSLMChange | Indicates if there is any mismatch in the SONET signal label. | ||
| 1.3.6.1.4.1.5812.47 | NoderingPortK1K2Change | Indicates the change in status indicated by K1,K2 bytes | ||
| 1.3.6.1.4.1.5812.48 | NoderingPortAISChange | A signal indicating a change of status indicated by the AIS bytes | ||
| 1.3.6.1.4.1.5812.49 | NoderingPortPHYChange | A trap indicating the change in phy status of ring port | ||
| 1.3.6.1.4.1.5812.50 | NodesonetPortTCAlarm | A SONET alarm threshold has been crossed. | ||
| 1.3.6.1.4.1.5812.55 | NodedsxAlarm | The status of a DSx line has changed. |