PRIVAT-MultiLAN-Switch-MIB
115 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | IpAddress OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.248 | Nodehirschmann | |||
| 1.3.6.1.4.1.248.2 | NodemultiLANSwitch | |||
| 1.3.6.1.4.1.248.2.1 | Nodebridge1 | |||
| 1.3.6.1.4.1.248.2.1.1 | NodebridgeHealth | The hirmaBridgeHealth trap information relates to the operational state of the MultiLAN Switch. This trap is sent only when the health state of the MultiLAN Sw… | ||
| 1.3.6.1.4.1.248.2.1.1 | Nodebridgemgmt | |||
| 1.3.6.1.4.1.248.2.1.1.1 | NodehirmaBasCapability | |||
| 1.3.6.1.4.1.248.2.1.1.1.1 | NodehirmaBasBridgeTable | |||
| 1.3.6.1.4.1.248.2.1.1.1.1.1 | ScalarhirmaBasBridgeGroupCapacity | read-only | mandatory | The number of slots of the MultiLAN Switch. |
| 1.3.6.1.4.1.248.2.1.1.1.1.2 | ScalarhirmaBasBridgeGroupMap | read-only | mandatory | This Bitfield represents the current Interface card configuration. The least significant bit indicates the left slot with the number 1. Each interface card (gr… |
| 1.3.6.1.4.1.248.2.1.1.1.1.3 | ScalarhirmaBasBridgeSoftVersion | read-only | mandatory | A string that contains information about the software release currently in use |
| 1.3.6.1.4.1.248.2.1.1.1.1.4 | ScalarhirmaBasBridgeHardVersion | read-only | mandatory | A string that contains information about the underlying hardware |
| 1.3.6.1.4.1.248.2.1.1.1.1.5 | ScalarhirmaBasBridgeMibVersion | read-only | mandatory | A string that contains information about the current private MIB release |
| 1.3.6.1.4.1.248.2.1.1.1.1.6 | ScalarhirmaBasBridgeSpanningTreeVersion | read-only | mandatory | A string that contains information about the current Spanning Tree Version. |
| 1.3.6.1.4.1.248.2.1.1.1.1.7 | ScalarhirmaBasBridgeSwitches | read-only | mandatory | State of the DIP-switches on the memoryboard (EBGM). The DIP-switches are defined as follows: switch | on | off 1 | service | normal 2 | service | normal 3 | r… |
| 1.3.6.1.4.1.248.2.1.1.1.1.8 | ScalarhirmaBasBridgePwrSplyState | read-only | mandatory | Used to indicate the state of the power supplies. 5V1 corresponds to the first power supply on the left side, etc. |
| 1.3.6.1.4.1.248.2.1.1.1.1.9 | ScalarhirmaBasBridgeFanState | read-only | mandatory | Used to indicate the fan state. If one of the two fans rotating speed is under value, hirmaBasBridgeFanState will change to nofunction (2). |
| 1.3.6.1.4.1.248.2.1.1.1.1.10 | ScalarhirmaBasBridgePwrAlarm | read-write | mandatory | If enabled (1), the health-trap will be sent in case of a power supply failure. |
| 1.3.6.1.4.1.248.2.1.1.1.1.11 | ScalarhirmaBasBridgeHealthAlarm | read-write | mandatory | If enabled (1), the health-trap will be sent in case of any kind of failure. Sending of a health-trap in case of a power supply can not be disabled by this att… |
| 1.3.6.1.4.1.248.2.1.1.1.1.12 | ScalarhirmaBasBridgeSpanningTree | read-write | mandatory | Used to indicate and set the state of the spanning tree mode. Note: Setting this variable to enabled (1), enables also the learning and the filtering mode. Set… |
| 1.3.6.1.4.1.248.2.1.1.1.1.13 | ScalarhirmaBasBridgeHealthState | read-only | mandatory | The BridgeHealthState indicates the operational state of the MultiLAN Switch. The BridgeHealthData and BridgeHealthText may be consulted for more specific info… |
| 1.3.6.1.4.1.248.2.1.1.1.1.14 | ScalarhirmaBasBridgeHealthText | read-only | mandatory | The BridgeHealthText provides information relevant to the operational state of the MultiLAN Switch. |
| 1.3.6.1.4.1.248.2.1.1.1.1.15 | ScalarhirmaBasBridgeHealthData | read-only | mandatory | The BridgeHealthData is a block of data octets that provides information relevant to the operational state of the MultiLAN Switch. |
| 1.3.6.1.4.1.248.2.1.1.1.1.16 | ScalarhirmaBasBridgeCounterReset | read-write | mandatory | Resets all non port related counters of the MultiLAN Switch. Note: Setting this variable to noReset (2) has no effect. The agent will always return the value n… |
| 1.3.6.1.4.1.248.2.1.1.1.2 | TablehirmaBasBridgeEventTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.1.1.2.1 | RowhirmaBasBridgeEventEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.1.1.2.1.1 | ColumnhirmaBasBridgeMessageID | read-only | mandatory | Used to uniquely identify messages within this table. Note: This table is as a ring buffer, a new entry in the table may overwrite the oldest message in the ta… |
| 1.3.6.1.4.1.248.2.1.1.1.2.1.2 | ColumnhirmaBasBridgeMessageIfIndex | read-only | mandatory | Used to uniquely identify the interface where the event has appeared. |
| 1.3.6.1.4.1.248.2.1.1.1.2.1.3 | ColumnhirmaBasBridgeMessage | read-only | mandatory | This object shows the message code according to the following table. 1) error message Code |Display| Description **********************************************… |
| 1.3.6.1.4.1.248.2.1.1.1.2.1.4 | ColumnhirmaBasBridgeMessageTime | read-only | mandatory | The value of sysUpTime when the message has occured. The time unit is tens of milliseconds. |
| 1.3.6.1.4.1.248.2.1.1.1.3 | TablehirmaBasGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.1.1.3.1 | RowhirmaBasGroupEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.1.1.3.1.1 | ColumnhirmaBasGroupID | read-only | mandatory | Used to uniquely identify an interface card within the MultiLAN Switch. |
| 1.3.6.1.4.1.248.2.1.1.1.3.1.2 | ColumnhirmaBasGroupNumOfPorts | read-only | mandatory | Number of ports of the associated interface card. |
| 1.3.6.1.4.1.248.2.1.1.1.3.1.3 | ColumnhirmaBasGroupPortMap | read-only | mandatory | Used to uniquely map interface numbers and interface card numbers. Both, interfaces and interface cards are numbered within a range of 1 to the maximum number … |
| 1.3.6.1.4.1.248.2.1.1.1.3.1.4 | ColumnhirmaBasGroupName | read-only | mandatory | Name of the interface cards. E.g : EBAUI, EBTP ... |
| 1.3.6.1.4.1.248.2.1.1.1.4 | TablehirmaBasPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.1.1.4.1 | RowhirmaBasPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.1.1.4.1.1 | ColumnhirmaBasPortID | read-only | mandatory | Used to uniquely identify an interface (port) within the MultiLAN Switch. Note: The interfaces (ports) are numbered in ascending order from the left side to th… |
| 1.3.6.1.4.1.248.2.1.1.1.4.1.2 | ColumnhirmaBasPortGroupID | read-only | mandatory | Used to identify the associated interface card. |
| 1.3.6.1.4.1.248.2.1.1.1.4.1.3 | ColumnhirmaBasPortLanType | read-only | mandatory | Used to identify different LAN types. |
| 1.3.6.1.4.1.248.2.1.1.1.4.1.4 | ColumnhirmaBasPortType | read-only | mandatory | Used to identify the physical media type of the interface card |
| 1.3.6.1.4.1.248.2.1.1.1.4.1.5 | ColumnhirmaBasPortShortDelay | read-write | mandatory | Used to change the operation mode between ethernet switching and 802.3 CSMA/CD. |
| 1.3.6.1.4.1.248.2.1.1.1.4.1.6 | ColumnhirmaBasPortLearning | read-write | mandatory | Used to indicate whether the learning mode of this port is enabled or disabled. Note: The learning mode may only be disabled (2) if the spanning tree mode is d… |
| 1.3.6.1.4.1.248.2.1.1.1.4.1.7 | ColumnhirmaBasPortFiltering | read-write | mandatory | Used to indicate whether the filtering mode of this port is enabled or disabled. Note: The filtering mode may only be disabled (2) if the spanning tree mode is… |
| 1.3.6.1.4.1.248.2.1.1.1.4.1.8 | ColumnhirmaBasPortRelay | read-write | mandatory | If enabled (1), all packets will be forwarded. Otherwise only packets with known addresses will be forwarded. |
| 1.3.6.1.4.1.248.2.1.1.1.4.1.9 | ColumnhirmaBasPortMode | read-only | mandatory | Indicates the transmission mode of the interface card. This mode can be adjusted by a jumper on the interface card |
| 1.3.6.1.4.1.248.2.1.1.1.4.1.10 | ColumnhirmaBasPortCounterReset | read-write | mandatory | Resets all port related counters. Note: Setting this variable to no reset (2) has no effect. The agent will always return the value no-reset (2) in response to… |
| 1.3.6.1.4.1.248.2.1.1.1.4.1.11 | ColumnhirmaBasPortState | read-only | mandatory | Indicates the operational state of the port such as -normal-, -carrier sense-, -jabber-, -idle-, etc. |
| 1.3.6.1.4.1.248.2.1.1.2 | NodehirmaSelfTestCapability | |||
| 1.3.6.1.4.1.248.2.1.1.2.1 | ScalarhirmaSelfTestBridgeReset | read-write | mandatory | Setting this value to reset (1), forces the MultiLAN Switch to reset according to the type in hirmaSelfTestBridgeResetType. |
| 1.3.6.1.4.1.248.2.1.1.2.2 | ScalarhirmaSelfTestBridgeResetType | read-write | mandatory | Type of resetwhich will be executed if hirmaSelfTestBridgeReset will be set to reset. |
| 1.3.6.1.4.1.248.2.1.1.2.3 | ScalarhirmaSelfTestBridgeSetDefaults | read-write | mandatory | Resets all parameters to the default value. Just like after a cold-start. |
| 1.3.6.1.4.1.248.2.1.1.2.4 | TablehirmaSelfTestGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.1.2.4.1 | RowhirmaSelfTestGroupEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.1.2.4.1.1 | ColumnhirmaSelfTestGroupID | read-only | mandatory | Used to uniquely identify a interface card. |
| 1.3.6.1.4.1.248.2.1.1.2.4.1.2 | ColumnhirmaSelfTestGroupDisplayTest | read-write | mandatory | Starts the internal display test. |
| 1.3.6.1.4.1.248.2.1.1.2.4.1.3 | ColumnhirmaSelfTestGroupSQETest | read-write | mandatory | Reading this value will offer the state of the SQE test. SQE test may be enabled by setting this object to enabled (1). Detecting a SQE test problem will chang… |
| 1.3.6.1.4.1.248.2.1.1.3 | NodehirmaFilterCapability | |||
| 1.3.6.1.4.1.248.2.1.1.3.1 | ScalarhirmaFilterMaxNumOfFilters | read-only | mandatory | Number of filters in the following table. |
| 1.3.6.1.4.1.248.2.1.1.3.2 | TablehirmaFilterTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.1.3.2.1 | RowhirmaFilterTableEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.1.3.2.1.1 | ColumnhirmaFilterID | read-only | mandatory | Used to uniquely identify an extended filter. The filter ID ranges between 1 and hirmaFilterMaxNumOfFilters. Caution: Throughput rate will decrease the more ex… |
| 1.3.6.1.4.1.248.2.1.1.3.2.1.2 | ColumnhirmaFilterMode | read-write | mandatory | Setting this variable to forward (1), will forward all packets that match on a single filter. Setting this variable to discard (3), will discard all packets th… |
| 1.3.6.1.4.1.248.2.1.1.3.2.1.3 | ColumnhirmaFilterDest | read-write | mandatory | This display string identifies the MAC address(es) for a single or a set of destination adress filters. For example; 00:80:63:01:02:03-00:80:63:04:05:06 define… |
| 1.3.6.1.4.1.248.2.1.1.3.2.1.4 | ColumnhirmaFilterSrc | read-write | mandatory | This display string identifies the MAC address(es) for a single or a set of source address filters. For example; 00:80:63:01:02:03-00:80:63:04:05:06 defines a … |
| 1.3.6.1.4.1.248.2.1.1.3.2.1.5 | ColumnhirmaFilterType | read-write | mandatory | This display string represents a single or a set of protocol types . For example; 8001-8006 defines a set of protocol types filter 8063 defines particularly on… |
| 1.3.6.1.4.1.248.2.1.1.3.2.1.6 | ColumnhirmaFilterPortIn | read-write | mandatory | Input ports, separated by commas. For example; 1,2,5,6 means, that only packets received on these 4 ports match this filter. Set an empty string to delete the … |
| 1.3.6.1.4.1.248.2.1.1.3.2.1.7 | ColumnhirmaFilterPortOut | read-write | mandatory | Output ports, separated by commas. For example; 1,2,5,6 means, that matching packets will be forwarded to these 4 ports. Set an empty string to delete the prev… |
| 1.3.6.1.4.1.248.2.1.1.4 | NodehirmaAddrBTCapability | |||
| 1.3.6.1.4.1.248.2.1.1.4.1 | ScalarhirmaAddrBTAddr | read-write | mandatory | All following addresses excluding this address will be listed. In general the last address of the previous block is used as the starting address of the next bl… |
| 1.3.6.1.4.1.248.2.1.1.4.2 | ScalarhirmaAddrBTBlock | read-only | mandatory | Offers a block of address information. This list of the address entries is not lexicographically ordered. Byte (n*10) m | State *******************************… |
| 1.3.6.1.4.1.248.2.1.1.5 | NodehirmaLoadCapability | |||
| 1.3.6.1.4.1.248.2.1.1.5.1 | NodehirmaFlashUpdate | |||
| 1.3.6.1.4.1.248.2.1.1.5.1.1 | ScalarhirmaFlashUpdateIPAddr | read-write | mandatory | The IP-address of the update-server. |
| 1.3.6.1.4.1.248.2.1.1.5.1.2 | ScalarhirmaFlashUpdateName | read-write | mandatory | This string contains the full pathname and name of the update file. |
| 1.3.6.1.4.1.248.2.1.1.5.1.3 | ScalarhirmaFlashUpdateAction | read-write | mandatory | Setting this variable to program will force the MultiLAN Switch to run a software update defined by the update file in hirmaFlashUpdateName and the update serv… |
| 1.3.6.1.4.1.248.2.1.1.5.2 | NodehirmaLoadSaveConfig | |||
| 1.3.6.1.4.1.248.2.1.1.5.2.1 | ScalarhirmaLoadSaveConIPAddr | read-write | mandatory | Tree different values are possible: 1: 0.0.0.0 will cause the MultiLAN Switch to set all read/write attributes to a default value in case of warm/cold start. 2… |
| 1.3.6.1.4.1.248.2.1.1.5.2.2 | ScalarhirmaLoadSaveConName | read-write | mandatory | This string contains the full pathname and name of the configuration file. |
| 1.3.6.1.4.1.248.2.1.1.5.2.3 | ScalarhirmaLoadSaveConAction | read-write | mandatory | Setting this attribute to 1 (load) will cause the Switch to read a configuration file from a tftp server in case that an existing tftp server is given by hirma… |
| 1.3.6.1.4.1.248.2.1.2 | NodehirmaMibhHandler | |||
| 1.3.6.1.4.1.248.2.1.2.1 | TablehirmaMibhCommTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.2.1.1 | RowhirmaMibhCommEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.2.1.1.1 | ColumnhirmaMibhCommIndex | read-only | mandatory | Used to uniquely identify an object in the table. |
| 1.3.6.1.4.1.248.2.1.2.1.1.2 | ColumnhirmaMibhCommCommunity | read-write | mandatory | Community string which the access rights are assigned to. New communities may be defined by setting community string to any non-empty string. Use an empty stri… |
| 1.3.6.1.4.1.248.2.1.2.1.1.3 | ColumnhirmaMibhCommAccess | read-write | mandatory | Access rights of the community. Warning: If you set the access rights of all non-trap communities to read-only you will not be able to write any MIB variable. … |
| 1.3.6.1.4.1.248.2.1.2.2 | TablehirmaMibhAccessTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.2.2.1 | RowhirmaMibhAccessEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.2.2.1.1 | ColumnhirmaMibhAccessCommIndex | read-only | mandatory | Index variable, must reference a valid entry in hirmaMibhCommTable. |
| 1.3.6.1.4.1.248.2.1.2.2.1.2 | ColumnhirmaMibhAccessIPAddr | read-only | mandatory | Entity's IP address. For example 0.0.0.0 means any IP address. |
| 1.3.6.1.4.1.248.2.1.2.2.1.3 | ColumnhirmaMibhAccessPort | read-only | mandatory | Entity's UDP port. |
| 1.3.6.1.4.1.248.2.1.2.2.1.4 | ColumnhirmaMibhAccessCommunity | read-only | mandatory | Community string referenced by hirmaMibhAccessCommIndex. This variable is supplied for convenience only. |
| 1.3.6.1.4.1.248.2.1.2.2.1.5 | ColumnhirmaMibhAccessAccess | read-write | mandatory | Access rights assigned to this entity. As an extension to the SNMP standard, it is possible to reduce the access rights granted by a given SNMP community profi… |
| 1.3.6.1.4.1.248.2.1.2.2.1.6 | ColumnhirmaMibhAccessState | read-write | mandatory | Setting a non-existent instance to enabled (1), will create a new instance in this table. Note: An entry may be temporarily suspended by setting state to disab… |
| 1.3.6.1.4.1.248.2.1.2.3 | TablehirmaMibhTrapTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.2.3.1 | RowhirmaMibhTrapEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.2.3.1.1 | ColumnhirmaMibhTrapCommIndex | read-only | mandatory | Index variable, must reference a valid entry in hirmaMibhCommTable. |
| 1.3.6.1.4.1.248.2.1.2.3.1.2 | ColumnhirmaMibhTrapIPAddr | read-only | mandatory | Destination IP address. |
| 1.3.6.1.4.1.248.2.1.2.3.1.3 | ColumnhirmaMibhTrapPort | read-only | mandatory | Destination UDP port. This must be set to 162 by default because the management system will listen to this UDP port for traps. |
| 1.3.6.1.4.1.248.2.1.2.3.1.4 | ColumnhirmaMibhTrapCommunity | read-only | mandatory | Community string referenced by hirmaMibhTrapCommIndex. This variable is supplied for convenience only. |
| 1.3.6.1.4.1.248.2.1.2.3.1.5 | ColumnhirmaMibhTrapState | read-write | mandatory | Setting a non-existent instance to enabled (1), will create a new trap entry in this table. Note: An entry may be temporarily suspended by setting state to dis… |
| 1.3.6.1.4.1.248.2.1.3 | NodehirmaUserInterface | |||
| 1.3.6.1.4.1.248.2.1.3.1 | NodehirmaLuiSystemTable | |||
| 1.3.6.1.4.1.248.2.1.3.1.1 | ScalarhirmaLuiLocalIPAddr | read-write | mandatory | IP address of MultiLAN Switch. |
| 1.3.6.1.4.1.248.2.1.3.1.2 | ScalarhirmaLuiGatewayIPAddr | read-write | mandatory | IP address of a gateway (router) needed to reach a server. |
| 1.3.6.1.4.1.248.2.1.3.1.3 | ScalarhirmaLuiNetMask | read-write | mandatory | Subnetmask of the subnet. |
| 1.3.6.1.4.1.248.2.1.3.2 | TablehirmaLuiUserTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.3.2.1 | RowhirmaLuiUserEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.248.2.1.3.2.1.1 | ColumnhirmaLuiUserID | read-only | mandatory | Table index variable |
| 1.3.6.1.4.1.248.2.1.3.2.1.2 | ColumnhirmaLuiUserName | read-write | mandatory | Userspecific Identification |
| 1.3.6.1.4.1.248.2.1.3.2.1.3 | ColumnhirmaLuiUserPasswd | read-write | mandatory | password of a specific user |
| 1.3.6.1.4.1.248.2.1.3.2.1.4 | ColumnhirmaLuiUserCommunity | read-write | mandatory | access-rights of the user |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacAddress | OCTET STRING (SIZE (6)) |