MIB Viewer

PRVT-SWITCH-MIB

124 objects
The switch MIB module for managing internal switch parameters
Imported Objects
IF-MIBifIndex
PRVT-VENDORDEF-MIBprvt-products
Q-BRIDGE-MIBdot1qTpFdbStatus
SNMPv2-SMIInteger32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCTruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.738.10.5Nodeswitch
1.3.6.1.4.1.738.10.5.100IdentityprvtSwitchMIBThe switch MIB module for managing internal switch parameters
1.3.6.1.4.1.738.10.5.100.0NodeprvtSwitchNotifications
1.3.6.1.4.1.738.10.5.100.0.1NotificationportSecurityViolationcurrentThe port security violation notification indicates that a port security violation has been detected, e.g more MAC adresses have been learned on that port than …
1.3.6.1.4.1.738.10.5.100.0.2NotificationsfpPluggedcurrentsfp plugged
1.3.6.1.4.1.738.10.5.100.0.3NotificationsfpUnPluggedcurrentsfp unplugged
1.3.6.1.4.1.738.10.5.100.0.4NotificationhardwareLicenseNotInstalledcurrentHardware license not installed. Some ports will not function normally.
1.3.6.1.4.1.738.10.5.100.0.5NotificationmplsMgmtTaskCrashedcurrentmpls_mgmt task crashed.
1.3.6.1.4.1.738.10.5.100.0.6NotificationmplsLdbHwTaskCrashedcurrentmpls_ldb_hw task crashed.
1.3.6.1.4.1.738.10.5.100.0.7NotificationmplsLdbFrwdTaskCrashedcurrentmpls_ldb_frwd task crashed.
1.3.6.1.4.1.738.10.5.100.0.8NotificationmplsStackTaskCrashedcurrentmpls_stack task crashed.
1.3.6.1.4.1.738.10.5.100.0.9NotificationprvtDuplicatedMACAddressAlarmcurrentThis notification is sent by the agent when a duplicated MAC is recived.
1.3.6.1.4.1.738.10.5.100.0.10NotificationunauthenticatedAccessViaCLIcurrentThe unauthenticatedAccessViaCLI notification indicates that the last attempt to login to the device via CLI cannot be authenticated.
1.3.6.1.4.1.738.10.5.100.1Nodesys
1.3.6.1.4.1.738.10.5.100.1.1NodesysProductsOids
1.3.6.1.4.1.738.10.5.100.1.1.10000NodetMetro7224
1.3.6.1.4.1.738.10.5.100.1.1.10001NodetVendorDev0001
1.3.6.1.4.1.738.10.5.100.1.1.10002NodetMetro7124S
1.3.6.1.4.1.738.10.5.100.1.1.10003NodetMetro5324T
1.3.6.1.4.1.738.10.5.100.1.1.10004NodetMarc3208SH
1.3.6.1.4.1.738.10.5.100.1.1.10005NodetMarc3312SC
1.3.6.1.4.1.738.10.5.100.1.1.10006NodetMarc3348S
1.3.6.1.4.1.738.10.5.100.1.1.10007NodetMarc3312WDB
1.3.6.1.4.1.738.10.5.100.1.1.10008NodetMarc3348WDB
1.3.6.1.4.1.738.10.5.100.1.1.10009NodetMarc3312WD
1.3.6.1.4.1.738.10.5.100.1.1.10010NodetMarc3348WD
1.3.6.1.4.1.738.10.5.100.1.1.10011NodetMarc3312SCH
1.3.6.1.4.1.738.10.5.100.1.1.10012NodetMarc3348SH
1.3.6.1.4.1.738.10.5.100.1.1.10013NodetMarc3348S2
1.3.6.1.4.1.738.10.5.100.1.1.10014NodetMarc3308
1.3.6.1.4.1.738.10.5.100.1.1.10015NodetMarc3306
1.3.6.1.4.1.738.10.5.100.1.1.11003NodetVendorDev0002
1.3.6.1.4.1.738.10.5.100.1.1.11004NodetVendorDev0003
1.3.6.1.4.1.738.10.5.100.1.1.11005NodetVendorDev0004
1.3.6.1.4.1.738.10.5.100.1.1.20004Nodethub4
1.3.6.1.4.1.738.10.5.100.1.1.20005Nodetatca401
1.3.6.1.4.1.738.10.5.100.1.1.20006Nodetatca510
1.3.6.1.4.1.738.10.5.100.1.1.20007Nodetatca510b
1.3.6.1.4.1.738.10.5.100.1.1.40000Nodetm8000
1.3.6.1.4.1.738.10.5.100.1.1.40001Nodetm8001
1.3.6.1.4.1.738.10.5.100.1.1.40002NodetMetro8064S
1.3.6.1.4.1.738.10.5.100.1.1.40003NodecMetro100
1.3.6.1.4.1.738.10.5.100.1.2TablesysManufacturingTablenot-accessiblecurrentsysManufacturing details per module
1.3.6.1.4.1.738.10.5.100.1.2.1RowsysManufacturingEntrynot-accessiblecurrentEntry in sysManufacturingTable
1.3.6.1.4.1.738.10.5.100.1.2.1.1ColumnmoduleIdnot-accessiblecurrentBoard id
1.3.6.1.4.1.738.10.5.100.1.2.1.2ColumnmoduleSysSerialNumberread-onlycurrentThis is the device's serial number, which is entered during the manufacturing process.
1.3.6.1.4.1.738.10.5.100.1.2.1.3ColumnmoduleSysAssemblyNumberread-onlycurrentSpecifies the equipment assembly number
1.3.6.1.4.1.738.10.5.100.1.2.1.4ColumnmoduleSysHwRevisionread-onlycurrentSpecifies the HW revision
1.3.6.1.4.1.738.10.5.100.1.2.1.5ColumnmoduleSysHwSubRevisionread-onlycurrentSpecifies the HW sub-revision
1.3.6.1.4.1.738.10.5.100.1.2.1.6ColumnmoduleSysPartNumberread-onlycurrentSpecifies the equipment part number
1.3.6.1.4.1.738.10.5.100.1.2.1.7ColumnmoduleSysCLEIread-onlycurrentSpecifies the common language equipment identification
1.3.6.1.4.1.738.10.5.100.1.2.1.8ColumnmoduleSysManufacturingDateread-onlycurrentSpecifies the manufacturing date
1.3.6.1.4.1.738.10.5.100.1.2.1.9ColumnmoduleSysBaseMacAddressread-onlycurrentBase MAC address of the module
1.3.6.1.4.1.738.10.5.100.1.2.1.10ColumnmoduleSysFirmwareVersionread-onlycurrentFirmware version of the module
1.3.6.1.4.1.738.10.5.100.1.3NodesysManufacturing
1.3.6.1.4.1.738.10.5.100.1.3.1ScalarsysSerialNumberread-onlycurrentThis is the device's serial number, which is entered during the manufacturing process.
1.3.6.1.4.1.738.10.5.100.1.3.3ScalarsysAssemblyNumberread-onlycurrentSpecifies the equipment assembly number
1.3.6.1.4.1.738.10.5.100.1.3.4ScalarsysPartNumberread-onlycurrentSpecifies the equipment part number
1.3.6.1.4.1.738.10.5.100.1.3.5ScalarsysCLEIread-onlycurrentSpecifies the common language equipment identification
1.3.6.1.4.1.738.10.5.100.1.3.6ScalarsysHwRevisionread-onlycurrentSpecifies the HW revision
1.3.6.1.4.1.738.10.5.100.1.3.7ScalarsysManufacturingDateread-onlycurrentSpecifies the manufacturing date
1.3.6.1.4.1.738.10.5.100.1.3.8ScalarsysHwSubRevisionread-onlycurrentSpecifies the HW sub-revision
1.3.6.1.4.1.738.10.5.100.1.3.9ScalarsysBaseMacAddressread-onlycurrentBase MAC address of the device
1.3.6.1.4.1.738.10.5.100.1.3.10ScalarsysFirmwareVersionread-onlycurrentFirmware version
1.3.6.1.4.1.738.10.5.100.2Nodeconfig
1.3.6.1.4.1.738.10.5.100.2.2NodeconfigL2
1.3.6.1.4.1.738.10.5.100.2.2.1TableconfigL2IfaceTablenot-accessiblecurrentA list of Interfaces and their properties
1.3.6.1.4.1.738.10.5.100.2.2.1.1RowconfigL2IfaceEntrynot-accessiblecurrentAn index of interfaces.
1.3.6.1.4.1.738.10.5.100.2.2.1.1.1ColumnconfigL2IfaceUnitnot-accessiblecurrentAn index that uniquely identifies a unit in the Interface Table.
1.3.6.1.4.1.738.10.5.100.2.2.1.1.2ColumnconfigL2IfaceSlotnot-accessiblecurrentAn index that uniquely identifies a slot within the unit in the Interface Table.
1.3.6.1.4.1.738.10.5.100.2.2.1.1.3ColumnconfigL2IfacePortnot-accessiblecurrentAn index that uniquely identifies a port within the slot in the Interface Table.
1.3.6.1.4.1.738.10.5.100.2.2.1.1.4ColumnconfigL2IfaceEnableread-writecurrentThe desired state of the interface.
1.3.6.1.4.1.738.10.5.100.2.2.1.1.5ColumnconfigL2IfaceDefaultVIDread-writecurrentThis object sets the default VLAN ID according to 802.1Q.
1.3.6.1.4.1.738.10.5.100.2.2.1.1.6ColumnconfigL2IfaceDuplexModeSetread-writecurrentThe duplex mode for the interface. If the port type does NOT support the default of autonegotiate (1), then the application will initialize the port to a valid…
1.3.6.1.4.1.738.10.5.100.2.2.1.1.7ColumnconfigL2IfaceSpeedSetread-writecurrentThe desired speed and duplex mode for the interface. If the selected control is not available for the interface, a value of illegal (99) is returned. If the po…
1.3.6.1.4.1.738.10.5.100.2.2.1.1.8ColumnconfigL2IfaceMturead-writecurrentThe Maximum Transmission Unit (in octets) of the interface.
1.3.6.1.4.1.738.10.5.100.2.2.1.1.9ColumnconfigL2IfaceFlowEnableread-writecurrentThe desired flow mode for the interface. Note that not all controls are available for all interfaces.
1.3.6.1.4.1.738.10.5.100.2.2.1.1.10ColumnconfigL2IfaceSelfFilterEnableread-writecurrentDeny packets received on this port to be switched back the same port/trunk. Default is false.
1.3.6.1.4.1.738.10.5.100.2.2.1.1.11ColumnconfigL2IfaceMacAddressread-onlycurrentSelf MAC adress per port.
1.3.6.1.4.1.738.10.5.100.2.2.1.1.12ColumnconfigL2IfaceEthertyperead-writecurrentThe ethertype of the interface.
1.3.6.1.4.1.738.10.5.100.2.2.2TablereportsL2IfaceTablenot-accessiblecurrentA list of Interfaces and their properties
1.3.6.1.4.1.738.10.5.100.2.2.2.1RowreportsL2IfaceEntrynot-accessiblecurrentAn index of interfaces.
1.3.6.1.4.1.738.10.5.100.2.2.2.1.1ColumnreportsL2IfaceMediaTyperead-onlycurrentInstalled media type
1.3.6.1.4.1.738.10.5.100.2.2.2.1.3ColumnreportsL2IfaceOperDuplexread-onlycurrentOperational duplex on the interface
1.3.6.1.4.1.738.10.5.100.2.2.2.1.4ColumnreportsL2IfaceOperDualread-onlycurrentIndicate whether interface is a dual combo port
1.3.6.1.4.1.738.10.5.100.2.2.2.1.5ColumnreportsL2IfaceOperActiveread-onlycurrentInformation for the active copper/fiber port in case of dual port
1.3.6.1.4.1.738.10.5.100.2.2.2.1.6ColumnreportsL2IfaceMediaTxTyperead-onlycurrentMedia tranceiver type
1.3.6.1.4.1.738.10.5.100.2.2.2.1.7ColumnreportsL2IfaceMediaConTyperead-onlycurrentMedia connector type
1.3.6.1.4.1.738.10.5.100.2.2.2.1.8ColumnreportsL2IfaceMediaLengthSMFread-onlycurrentMedia length of the single mode fiber
1.3.6.1.4.1.738.10.5.100.2.2.2.1.9ColumnreportsL2IfaceMediaLength50UMread-onlycurrentMedia length of 50um fiber
1.3.6.1.4.1.738.10.5.100.2.2.2.1.10ColumnreportsL2IfaceMediaLength62UMread-onlycurrentMedia length of 62.5um fiber
1.3.6.1.4.1.738.10.5.100.2.2.2.1.11ColumnreportsL2IfaceMediaLengthCuread-onlycurrentMedia length of copper
1.3.6.1.4.1.738.10.5.100.2.2.2.1.12ColumnreportsL2IfaceMediaLengthOM3read-onlycurrentMedia length of 50um OM3 fiber
1.3.6.1.4.1.738.10.5.100.2.2.2.1.13ColumnreportsL2IfaceMediaEncodingread-onlycurrentMedia encoding
1.3.6.1.4.1.738.10.5.100.2.2.2.1.14ColumnreportsL2IfaceMediaVendorIDread-onlycurrentMedia vendor IEEE company ID
1.3.6.1.4.1.738.10.5.100.2.2.2.1.15ColumnreportsL2IfaceMediaVendorNameread-onlycurrentMedia vendor name (ASCII)
1.3.6.1.4.1.738.10.5.100.2.2.2.1.16ColumnreportsL2IfaceMediaVendorSNread-onlycurrentMedia serial number provided by the vendor (ASCII)
1.3.6.1.4.1.738.10.5.100.2.2.2.1.17ColumnreportsL2IfaceMediaVendorPNread-onlycurrentMedia part number provided by the vendor (ASCII)
1.3.6.1.4.1.738.10.5.100.2.2.2.1.18ColumnreportsL2IfaceMediaVendorRevread-onlycurrentMedia revision level for part number provided by vendor (ASCII)
1.3.6.1.4.1.738.10.5.100.2.2.2.1.19ColumnreportsL2IfaceMediaVendorManufacturingDateread-onlycurrentMedia manufacturing date provided by the vendor (ASCII)
1.3.6.1.4.1.738.10.5.100.2.2.2.1.20ColumnreportsL2IfaceMediaDiagnDDMread-onlycurrentMedia Digital Diagnostic Monitoring
1.3.6.1.4.1.738.10.5.100.2.2.2.1.21ColumnreportsL2IfaceMediaDiagnIntCalread-onlycurrentMedia diagnostic internal calibration
1.3.6.1.4.1.738.10.5.100.2.2.2.1.22ColumnreportsL2IfaceMediaDiagnExtCalread-onlycurrentMedia diagnostic external calibration
1.3.6.1.4.1.738.10.5.100.2.2.2.1.23ColumnreportsL2IfaceMediaDiagnAPMread-onlycurrentMedia diagnostic avgerage power measurement
1.3.6.1.4.1.738.10.5.100.2.2.2.1.24ColumnreportsL2IfaceMediaDiagnACRread-onlycurrentMedia diagnostic address change
1.3.6.1.4.1.738.10.5.100.2.2.2.1.25ColumnreportsL2IfaceMediaBitrateNomread-onlycurrentMedia nominal bitrate
1.3.6.1.4.1.738.10.5.100.2.2.2.1.26ColumnreportsL2IfaceMediaBitrateMinread-onlycurrentMedia minimum bitrate in percent below the nominal
1.3.6.1.4.1.738.10.5.100.2.2.2.1.27ColumnreportsL2IfaceMediaBitrateMaxread-onlycurrentMedia maximum bitrate in percent above the nominal
1.3.6.1.4.1.738.10.5.100.2.2.2.1.28ColumnreportsL2IfaceMediaCompatSonetread-onlycurrentMedia Sonet compatibility
1.3.6.1.4.1.738.10.5.100.2.2.2.1.29ColumnreportsL2IfaceMediaCompatEthread-onlycurrentMedia Ethernet compatibility
1.3.6.1.4.1.738.10.5.100.2.2.2.1.30ColumnreportsL2IfaceMediaCompatInfinibandread-onlycurrentMedia InfiniBand compatibility
1.3.6.1.4.1.738.10.5.100.2.2.2.1.31ColumnreportsL2IfaceMediaCompatEsconread-onlycurrentMedia ESCON compatibility
1.3.6.1.4.1.738.10.5.100.2.2.2.1.32ColumnreportsL2IfaceMediaCompat10Gread-onlycurrentMedia 10G Ethernet compatibility
1.3.6.1.4.1.738.10.5.100.2.2.2.1.33ColumnreportsL2IfaceMediaCompatFbrChLenread-onlycurrentMedia Fibre Channel link length
1.3.6.1.4.1.738.10.5.100.2.2.2.1.34ColumnreportsL2IfaceMediaCompatFbrChTechread-onlycurrentMedia Fibre Channel transmitter technology
1.3.6.1.4.1.738.10.5.100.2.2.2.1.35ColumnreportsL2IfaceMediaCompatFbrChMediaread-onlycurrentMedia Fibre Channel transmission media
1.3.6.1.4.1.738.10.5.100.2.2.2.1.36ColumnreportsL2IfaceMediaCompatFbrChSpeedread-onlycurrentMedia Fibre Channel speed, in MBps
1.3.6.1.4.1.738.10.5.100.2.2.3ScalarclearInterfaceFdbTableread-writecurrentClear fdb table for interface given as argument. Both notations - SNMP and CLI are accepted - for example can be set either to 1/1/1 or 1101. If port notation …
1.3.6.1.4.1.738.10.5.100.2.2.4ScalarclearInterfaceFdbTableStatusread-onlycurrentReturn code from last operation over clearInterfaceFdbTable.
1.3.6.1.4.1.738.10.6NodeipSwitch
1.3.6.1.4.1.738.10.6.3Nodempls
1.3.6.1.4.1.738.10.6.4NoderoutingProtocols
1.3.6.1.4.1.738.10.7NodeserviceAccessSwitch
1.3.6.1.4.1.738.10.111Nodesoftware
MIB Viewer