PW-CEM-MIB
115 objects
This MIB contains managed object definitions for Circuit Emulation over MPLS as in: Malis, A., Vogelsang, S., and Martini, L. 'SONET/SDH Circuit Emulation Service Over MPLS (CEM) encapsulation', Internet Draft <draft-malis-sonet- ces-mpls-05.txt>, July 2001. This MIB reports to the PW-MIB. The PW-MIB contains structures and MIB associations generic to Pseudo-Wire Virtual Circuit (VC) emulation. VC-specific MIBs (such as this) contain config and stats for specific VC types.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount |
| PW-MIB | pwVcIndex pwVcInstance pwVcOperStatus |
| PW-TC-MIB | PwVcIndex |
| SNMPv2-CONF | -- MODULE-COMPLIANCE NOTIFICATION-GROUP -- OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 experimental Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | Danenberg et al Expires August 2001 7 Internet Draft MPLS CEM MIB July 2001 TimeStamp RowStatus StorageType TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.3.8888 | IdentitypwVcCemMIB | This MIB contains managed object definitions for Circuit Emulation over MPLS as in: Malis, A., Vogelsang, S., and Martini, L. 'SONET/SDH Circuit Emulation Serv… | ||
| 1.3.6.1.3.8888.0 | NodepwVcCemNotifications | |||
| 1.3.6.1.3.8888.0.0 | NodepwVcCemNotifyPrefix | |||
| 1.3.6.1.3.8888.0.0.1 | NotificationpwVcCemUp | current | This notification is generated when a CEM VC has Danenberg et al Expires August 2001 36 Internet Draft MPLS CEM MIB July 2001 exited the 'failure' state. | |
| 1.3.6.1.3.8888.0.0.2 | NotificationpwVcCemDown | current | This notification is generated when a CEM VC has entered the 'failure' state. See description of pwVcCemPerfLastDefectsAtFailure object. | |
| 1.3.6.1.3.8888.1 | NodepwVcCemObjects | |||
| 1.3.6.1.3.8888.1.1 | TablepwVcCemTable | not-accessible | current | |
| 1.3.6.1.3.8888.1.1.1 | RowpwVcCemEntry | not-accessible | current | This MIB reports to the PW-MIB. This table is indexed by the same index that was created for the associated entry in the PW VC Table (in the PW-MIB). - The PwV… |
| 1.3.6.1.3.8888.1.1.1.1 | ColumnpwVcCemSonetPathIfIndex | read-write | current | This is a unique index within the ifTable. It represents the interface index for the SONET path. A value of zero indicates an interface index that has yet to b… |
| 1.3.6.1.3.8888.1.1.1.2 | ColumnpwVcCemConfIndex | read-write | current | Index to CEM configuration table below. It is likely that multiple CEM VCs will share 1 CEM conf table entry. |
| 1.3.6.1.3.8888.1.1.1.3 | ColumnpwVcCemPerfDbaInPacketsHC | read-only | current | Number of DBA packets received. |
| 1.3.6.1.3.8888.1.1.1.4 | ColumnpwVcCemPerfDbaOutPacketsHC | read-only | current | Number of DBA packets sent. |
| 1.3.6.1.3.8888.1.1.1.5 | ColumnpwVcCemPerfDbaInPackets | read-only | current | Number of DBA packets received. |
| 1.3.6.1.3.8888.1.1.1.6 | ColumnpwVcCemPerfDbaOutPackets | read-only | current | Number of DBA packets sent. |
| 1.3.6.1.3.8888.1.1.1.7 | ColumnpwVcCemPerfInNegPtrAdjustHC | read-only | current | Number of negative pointer adjustments sent on the SONET path based on CEM pointer adjustments received. |
| 1.3.6.1.3.8888.1.1.1.8 | ColumnpwVcCemPerfInPosPtrAdjustHC | read-only | current | Number of postive pointer adjustments sent on the SONET path based on CEM pointer adjustments received. |
| 1.3.6.1.3.8888.1.1.1.9 | ColumnpwVcCemPerfInPtrAdjustSecs | read-only | current | Number of seconds in which a pos or neg pointer adjustment was sent on the SONET path. |
| 1.3.6.1.3.8888.1.1.1.10 | ColumnpwVcCemPerfOutNegPtrAdjustHC | read-only | current | Number of negative pointer adjustments seen on the SONET path and encoded onto sent CEM packets. |
| 1.3.6.1.3.8888.1.1.1.11 | ColumnpwVcCemPerfOutPosPtrAdjustHC | read-only | current | Number of positive pointer adjustments seen on the SONET path and encoded onto sent CEM packets. |
| 1.3.6.1.3.8888.1.1.1.12 | ColumnpwVcCemPerfOutPtrAdjustSecs | read-only | current | Number of seconds in which a pos or neg pointer adjustment was seen on the SONET path. |
| 1.3.6.1.3.8888.1.1.1.13 | ColumnpwVcCemPerfAbsPtrAdjust | read-only | current | Absolute Pointer adjustments is relative adjustment drifts between inbound and outbound streams. It is calculated as such : ( InPosPtrAdjust - InNegPtrAdjust) … |
| 1.3.6.1.3.8888.1.1.1.14 | ColumnpwVcCemPerfCorrectableHdrErrors | read-only | current | Number of correctable CEM header errors detected on inbound CEM packets. |
| 1.3.6.1.3.8888.1.1.1.15 | ColumnpwVcCemPerfUncorrectableHdrErrors | read-only | current | Number of uncorrectable CEM header errors detected on inbound CEM packets. |
| 1.3.6.1.3.8888.1.1.1.16 | ColumnpwVcCemPerfMissingPkts | read-only | current | Number of missing packets (as detected via CEM header sequence number gaps). |
| 1.3.6.1.3.8888.1.1.1.17 | ColumnpwVcCemPerfPktsOoseq | read-only | current | Number of packets detected out of sequence (via CEM header sequence numbers), but were able to be re-sequenced. Note: some implementations may not support this… |
| 1.3.6.1.3.8888.1.1.1.18 | ColumnpwVcCemPerfPktsOoseqDropped | read-only | current | Number of packets detected out of sequence (via CEM header sequence numbers), but were unable to be re- sequenced. |
| 1.3.6.1.3.8888.1.1.1.19 | ColumnpwVcCemPerfJtrBfrUnderruns | read-only | current | Number of times the jitter buffer transitioned to empty. |
| 1.3.6.1.3.8888.1.1.1.20 | ColumnpwVcCemPerfJtrBfrOverruns | read-only | current | Number of packets received while jitter buffer is full. |
| 1.3.6.1.3.8888.1.1.1.21 | ColumnpwVcCemPerfPktsBadLength | read-only | current | Number of packets received larger or smaller than pwVcCemConfPktLength. |
| 1.3.6.1.3.8888.1.1.1.22 | ColumnpwVcCemPerfESs | read-only | current | The counter associated with the number of Errored Seconds encountered. See future versions of draft-malis-sonet-ces-mpls for definition of ES. |
| 1.3.6.1.3.8888.1.1.1.23 | ColumnpwVcCemPerfSESs | read-only | current | The counter associated with the number of Severely Errored Seconds. See future versions of draft-malis-sonet-ces-mpls for definition of SES. |
| 1.3.6.1.3.8888.1.1.1.24 | ColumnpwVcCemPerfUASs | read-only | current | The counter associated with the number of UnAvailable Seconds. See pwVcCemConfSesToUAS. NOTE: When first entering the UAS state, the number of SesToUas is adde… |
| 1.3.6.1.3.8888.1.1.1.25 | ColumnpwVcCemPerfLastDefectsAtFailure | read-only | current | The state of defects when CEM VC last entered the a 'failure' state. Since more than one defect can contributed to a CEM VC failure, all are shown here. Note: … |
| 1.3.6.1.3.8888.1.1.1.26 | ColumnpwVcCemPerfLastFailureTimeStamp | read-only | current | The value of sysUpTime on the most recent occasion at which the CEM enterd the 'failure' state. |
| 1.3.6.1.3.8888.1.1.1.27 | ColumnpwVcCemPerfDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such disco… |
| 1.3.6.1.3.8888.1.2 | ScalarpwVcCemConfIndexNext | read-only | current | This object contains an appropriate value to be used for pwVcCemConfIndex when creating entries in the pwVcCemConfTable. The value 0 indicates that no unassign… |
| 1.3.6.1.3.8888.1.3 | TablepwVcCemConfTable | not-accessible | current | This table contains a set of parameters that may be referenced by 1 or more CEM VCs by pwVcCemTable. |
| 1.3.6.1.3.8888.1.3.1 | RowpwVcCemConfEntry | not-accessible | current | These parameters define the characteristics of a CEM VC. They are grouped here to ease NMS burden. Once an entry is created here it may be re-used by many VCs. |
| 1.3.6.1.3.8888.1.3.1.1 | ColumnpwVcCemConfTableIndex | not-accessible | current | Primary index to this table |
| 1.3.6.1.3.8888.1.3.1.2 | ColumnpwVcCemConfigError | read-only | current | Various configurations errors. Illegal settings within the pwVcCemConf table. |
| 1.3.6.1.3.8888.1.3.1.3 | ColumnpwVcCemConfMaxPktLength | read-create | current | This is the maximum CEM packet length in number of bytes (including CEM header and payload). It is fixed and applies to inbound and outbound packets carrying u… |
| 1.3.6.1.3.8888.1.3.1.4 | ColumnpwVcCemConfMinPktLength | read-create | current | This is the minimum CEM packet length in number of bytes (including CEM header and payload). It applies to CEM's bandwidth-savings packets. Currently DBA is th… |
| 1.3.6.1.3.8888.1.3.1.5 | ColumnpwVcCemConfCemOptions | read-create | current | Used by signaling (LDP) to fill in the 'Virtual Circuit FEC element' and the CEM interface parameters therein. CEM options are formatted into bit fields within… |
| 1.3.6.1.3.8888.1.3.1.6 | ColumnpwVcCemConfPktResequence | read-create | current | If set True: as inbound packets are queued in the jitter buffer, out of order packets are re-sequenced. The maximum sequence number differential (i.e., the ran… |
| 1.3.6.1.3.8888.1.3.1.7 | ColumnpwVcCemConfEnableDBA | read-create | current | Any bits set here MUST enable the DBA (dynamic bandwidth allocation) feature for the specified condition. Setting allOnesOnAis will cause CEM packet payload su… |
| 1.3.6.1.3.8888.1.3.1.8 | ColumnpwVcCemConfJtrBfrDepth | read-create | current | This setting configures the number of packet buffers reserved for this CEM VC. This object essentially sets the maximum amount of time allowed between CEM pack… |
| 1.3.6.1.3.8888.1.3.1.9 | ColumnpwVcCemConfConsecPktsInsync | read-create | current | Consecutive pkts with sequential sequence numbers required to exit the LOPS state. |
| 1.3.6.1.3.8888.1.3.1.10 | ColumnpwVcCemConfConsecMissingOutSync | read-create | current | Consecutive missing pkts required to enter the LOPS state. |
| 1.3.6.1.3.8888.1.3.1.11 | ColumnpwVcCemConfErrorAction | read-create | current | These are the actions to take when inbound packets are missing due to gap in sequence numbers (uncorrectable via available re-sequencing), jitter buffer underr… |
| 1.3.6.1.3.8888.1.3.1.12 | ColumnpwVcCemConfUserErrorAction | read-create | current | Used when userValue selected above. This byte value is sent on every byte in every SPE. |
| 1.3.6.1.3.8888.1.3.1.13 | ColumnpwVcCemConfSesToUas | read-create | current | Number of consecutive SESs before declaring VC in UAS state (and at which point pwVcCemPerfUASs starts counting). The SesToUas default value is 10 seconds. NOT… |
| 1.3.6.1.3.8888.1.3.1.14 | ColumnpwVcCemConfUasAction | read-create | current | These are the actions to take once the CEM VC has been declared in UAS state (as observed in pwVcCemPerfDefects) and there are missing packets (as described in… |
| 1.3.6.1.3.8888.1.3.1.15 | ColumnpwVcCemConfUserUasAction | read-create | current | Used when userValue selected above. This byte value is sent on every byte in every SPE. |
| 1.3.6.1.3.8888.1.3.1.16 | ColumnpwVcCemConfApsCriteria | read-create | current | Bits set here represent defects used as inputs into APS mechanisms (see PW-MIB). NOTE: these indications are as set within pwVcCemPerfDefects. Note: for APS ap… |
| 1.3.6.1.3.8888.1.3.1.17 | ColumnpwVcCemConfRowStatus | read-create | current | For creating, modifying, and deleting this row. |
| 1.3.6.1.3.8888.1.3.1.18 | ColumnpwVcCemConfStorageType | read-create | current | This variable indicates the storage type for this object. |
| 1.3.6.1.3.8888.1.4 | TablepwVcCemPerfCurrentTable | not-accessible | current | This table provides per CEM VC performance information much like the pwVcCemPerfTable above. However, these counts represent the current 15 minute interval onl… |
| 1.3.6.1.3.8888.1.4.1 | RowpwVcCemPerfCurrentEntry | not-accessible | current | An entry in this table is created by the agent for every pwVcCemConf entry. It is an extension to the pwVcCemConf table. After 15 minutes, the contents of this… |
| 1.3.6.1.3.8888.1.4.1.1 | ColumnpwVcCemPerfCurrentDbaInPacketsHC | read-only | current | Number of DBA packets received. |
| 1.3.6.1.3.8888.1.4.1.2 | ColumnpwVcCemPerfCurrentDbaOutPacketsHC | read-only | current | Number of DBA packets sent. |
| 1.3.6.1.3.8888.1.4.1.3 | ColumnpwVcCemPerfCurrentDbaInPackets | read-only | current | Number of DBA packets received. |
| 1.3.6.1.3.8888.1.4.1.4 | ColumnpwVcCemPerfCurrentDbaOutPackets | read-only | current | Number of DBA packets sent. |
| 1.3.6.1.3.8888.1.4.1.5 | ColumnpwVcCemPerfCurrentInNegPtrAdjustHC | read-only | current | Number of negative pointer adjustments sent on the SONET path based on CEM pointer adjustments received. |
| 1.3.6.1.3.8888.1.4.1.6 | ColumnpwVcCemPerfCurrentInPosPtrAdjustHC | read-only | current | Number of postive pointer adjustments sent on the SONET path based on CEM pointer adjustments received. |
| 1.3.6.1.3.8888.1.4.1.7 | ColumnpwVcCemPerfCurrentInPtrAdjustSecs | read-only | current | Number of seconds in which a pos or neg pointer adjustment was sent on the SONET path. |
| 1.3.6.1.3.8888.1.4.1.8 | ColumnpwVcCemPerfCurrentOutNegPtrAdjustHC | read-only | current | Number of negative pointer adjustments seen on the SONET path and encoded onto sent CEM packets. |
| 1.3.6.1.3.8888.1.4.1.9 | ColumnpwVcCemPerfCurrentOutPosPtrAdjustHC | read-only | current | Number of positive pointer adjustments seen on the SONET path and encoded onto sent CEM packets. |
| 1.3.6.1.3.8888.1.4.1.10 | ColumnpwVcCemPerfCurrentOutPtrAdjustSecs | read-only | current | Number of seconds in which a pos or neg pointer adjustment was seen on the SONET path. |
| 1.3.6.1.3.8888.1.4.1.11 | ColumnpwVcCemPerfCurrentAbsPtrAdjust | read-only | current | Absolute Pointer adjustments is relative adjustment drifts between inbound and outbound streams. It is calculated as such : ( InPosPtrAdjust - InNegPtrAdjust) … |
| 1.3.6.1.3.8888.1.4.1.12 | ColumnpwVcCemPerfCurrentCrctHdrErrors | read-only | current | Number of correctable CEM header errors detected on inbound CEM packets. |
| 1.3.6.1.3.8888.1.4.1.13 | ColumnpwVcCemPerfCurrentUncrctHdrErrors | read-only | current | Number of uncorrectable CEM header errors detected on inbound CEM packets. |
| 1.3.6.1.3.8888.1.4.1.14 | ColumnpwVcCemPerfCurrentMissingPkts | read-only | current | Number of missing packets (as detected via CEM header sequence number gaps). |
| 1.3.6.1.3.8888.1.4.1.15 | ColumnpwVcCemPerfCurrentPktsOoseq | read-only | current | Number of packets detected out of sequence (via CEM Danenberg et al Expires August 2001 27 Internet Draft MPLS CEM MIB July 2001 header sequence numbers), but … |
| 1.3.6.1.3.8888.1.4.1.16 | ColumnpwVcCemPerfCurrentPktsOoseqDropped | read-only | current | Number of packets detected out of sequence (via CEM header sequence numbers), but were unable to be re- sequenced. |
| 1.3.6.1.3.8888.1.4.1.17 | ColumnpwVcCemPerfCurrentJtrBfrUnderruns | read-only | current | Number of times the jitter buffer transitioned to empty. |
| 1.3.6.1.3.8888.1.4.1.18 | ColumnpwVcCemPerfCurrentJtrBfrOverruns | read-only | current | Number of packets received while jitter buffer is full. |
| 1.3.6.1.3.8888.1.4.1.19 | ColumnpwVcCemPerfCurrentPktsBadLength | read-only | current | Number of non-bandwidth-saving packets received larger or smaller than pwVcCemConfMaxPktLength. Plus number of bandwidth-saving packets (like DBA) that are sma… |
| 1.3.6.1.3.8888.1.4.1.20 | ColumnpwVcCemPerfCurrentESs | read-only | current | The counter associated with the number of Errored Seconds encountered. |
| 1.3.6.1.3.8888.1.4.1.21 | ColumnpwVcCemPerfCurrentSESs | read-only | current | The counter associated with the number of Severely Errored Seconds encountered. |
| 1.3.6.1.3.8888.1.4.1.22 | ColumnpwVcCemPerfCurrentUASs | read-only | current | The counter associated with the number of Unavailable Seconds encountered. |
| 1.3.6.1.3.8888.1.5 | TablepwVcCemPerfIntervalTable | not-accessible | current | This table provides per CEM VC performance information much like the pwVcCemPerfCurrentTable above. However, these counts represent historical 15 minute interv… |
| 1.3.6.1.3.8888.1.5.1 | RowpwVcCemPerfIntervalEntry | not-accessible | current | An entry in this table is created by the agent for every pwVcCemPerfCurrentEntry that is 15 minutes old. The contents of the Current entry are copied to the ne… |
| 1.3.6.1.3.8888.1.5.1.1 | ColumnpwVcCemPerfIntervalNumber | not-accessible | current | A number (normally between 1 and 96 to cover a 24 hour period) which identifies the interval for which the set of statistics is available. The interval identif… |
| 1.3.6.1.3.8888.1.5.1.2 | ColumnpwVcCemPerfIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.3.8888.1.5.1.3 | ColumnpwVcCemPerfIntervalReset | read-create | current | Used in cases where the user knows that the errors within this interval should not be counted. Writing 'reset' sets all error counts to zero. |
| 1.3.6.1.3.8888.1.5.1.4 | ColumnpwVcCemPerfIntervalDbaInPacketsHC | read-only | current | Number of DBA packets received. |
| 1.3.6.1.3.8888.1.5.1.5 | ColumnpwVcCemPerfIntervalDbaOutPacketsHC | read-only | current | Number of DBA packets sent. |
| 1.3.6.1.3.8888.1.5.1.6 | ColumnpwVcCemPerfIntervalDbaInPackets | read-only | current | Number of DBA packets received. |
| 1.3.6.1.3.8888.1.5.1.7 | ColumnpwVcCemPerfIntervalDbaOutPackets | read-only | current | Number of DBA packets sent. |
| 1.3.6.1.3.8888.1.5.1.8 | ColumnpwVcCemPerfIntervalInNegPtrAdjustHC | read-only | current | Number of negative pointer adjustments sent on the SONET path based on CEM pointer adjustments received. |
| 1.3.6.1.3.8888.1.5.1.9 | ColumnpwVcCemPerfIntervalInPosPtrAdjustHC | read-only | current | Number of postive pointer adjustments sent on the SONET path based on CEM pointer adjustments received. |
| 1.3.6.1.3.8888.1.5.1.10 | ColumnpwVcCemPerfIntervalInPtrAdjustSecs | read-only | current | Number of seconds in which a pos or neg pointer adjustment was sent on the SONET path. |
| 1.3.6.1.3.8888.1.5.1.11 | ColumnpwVcCemPerfIntervalOutNegPtrAdjustHC | read-only | current | Number of negative pointer adjustments seen on the SONET path and encoded onto sent CEM packets. |
| 1.3.6.1.3.8888.1.5.1.12 | ColumnpwVcCemPerfIntervalOutPosPtrAdjustHC | read-only | current | Number of positive pointer adjustments seen on the SONET path and encoded onto sent CEM packets. |
| 1.3.6.1.3.8888.1.5.1.13 | ColumnpwVcCemPerfIntervalOutPtrAdjustSecs | read-only | current | Number of seconds in which a pos or neg pointer adjustment was seen on the SONET path. |
| 1.3.6.1.3.8888.1.5.1.14 | ColumnpwVcCemPerfIntervalAbsPtrAdjust | read-only | current | Absolute Pointer adjustments is relative adjustment drifts between inbound and outbound streams. It is calculated as such : Danenberg et al Expires August 2001… |
| 1.3.6.1.3.8888.1.5.1.15 | ColumnpwVcCemPerfIntervalCrctHdrErrors | read-only | current | Number of correctable CEM header errors detected on inbound CEM packets. |
| 1.3.6.1.3.8888.1.5.1.16 | ColumnpwVcCemPerfIntervalUncrctHdrErrors | read-only | current | Number of uncorrectable CEM header errors detected on inbound CEM packets. |
| 1.3.6.1.3.8888.1.5.1.17 | ColumnpwVcCemPerfIntervalMissingPkts | read-only | current | Number of missing packets (as detected via CEM header sequence number gaps). |
| 1.3.6.1.3.8888.1.5.1.18 | ColumnpwVcCemPerfIntervalPktsOoseq | read-only | current | Number of packets detected out of sequence (via CEM header sequence numbers), but were able to be re-sequenced. Note: some implementations mat not support this… |
| 1.3.6.1.3.8888.1.5.1.19 | ColumnpwVcCemPerfIntervalPktsOoseqDropped | read-only | current | Number of packets detected out of sequence (via CEM header sequence numbers), but were unable to be re- sequenced. |
| 1.3.6.1.3.8888.1.5.1.20 | ColumnpwVcCemPerfIntervalJtrBfrUnderruns | read-only | current | Number of times the jitter buffer transitioned to empty. |
| 1.3.6.1.3.8888.1.5.1.21 | ColumnpwVcCemPerfIntervalJtrBfrOverruns | read-only | current | Number of packets received while jitter buffer is full. |
| 1.3.6.1.3.8888.1.5.1.22 | ColumnpwVcCemPerfIntervalPktsBadLength | read-only | current | Number of packets received larger or smaller than pwVcCemConfPktLength. |
| 1.3.6.1.3.8888.1.5.1.23 | ColumnpwVcCemPerfIntervalESs | read-only | current | The counter associated with the number of Errored Seconds encountered. |
| 1.3.6.1.3.8888.1.5.1.24 | ColumnpwVcCemPerfIntervalSESs | read-only | current | The counter associated with the number of Severely Errored Seconds encountered. |
| 1.3.6.1.3.8888.1.5.1.25 | ColumnpwVcCemPerfIntervalUASs | read-only | current | The counter associated with the number of Unavailable Seconds encountered. |
| 1.3.6.1.3.8888.1.6 | TablepwVcCemSonetPathExtTable | not-accessible | current | This table associates a SONET path with a CEM VC (or a set of CEM VCs) and provides the starting time-slot of the SONET path. It as assumed that the transmit a… |
| 1.3.6.1.3.8888.1.6.1 | RowpwVcCemSonetPathExtEntry | not-accessible | current | This table is indexed by the SONET path ifIndex. An entry to this table is created by the agent when an entry (intended for CEM) is created in the sonetPathCur… |
| 1.3.6.1.3.8888.1.6.1.1 | ColumnpwVcCemSonetExtPathIfIndex | not-accessible | current | Index for a row in the sonetPathCurrentTable. |
| 1.3.6.1.3.8888.1.6.1.2 | ColumnpwVcCemSonetPathExtVcIndex | read-write | current | Index for the conceptual row identifying a VC (or set of VCs) within the generic PW VC table (in PW-MIB) or the local pwVcCemTable. |
| 1.3.6.1.3.8888.1.6.1.3 | ColumnpwVcCemSonetPathExtTimeSlot | read-write | current | Starting time-slot for this SONET path within the SONET line and section. For OC-48, this value could range from 1 to 48. The SONET path width must be taken in… |
| 1.3.6.1.3.8888.1.6.1.4 | ColumnpwVcCemSonetPathExtStorageType | read-write | current | This variable indicates the storage type for this object. |
| 1.3.6.1.3.8888.1.7 | ScalarpwVcCemGlobalNotifyEnable | read-write | current | If this object is true, then it enables the generation of pwVcCemUp and pwVcCemDown notifications, otherwise these notifications are not emitted. Note: enablin… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PwVcCemConfIndex | Unsigned32 | current | Index into the pwVcCemConfTable. Removed trap OID declarations |