PW-STD-MIB
139 objects
This MIB module contains managed object definitions for pseudowire operation as in Bryant, S. and P. Pate, 'Pseudo Wire Emulation Edge-to-Edge (PWE3) Architecture' [RFC3985], Martini, L., et al, 'Pseudowire Setup and Maintenance Using the Label Distribution Protocol (LDP)' [RFC4447], and Townsley, M., et al, 'Layer Two Tunneling Protocol (Version 3)' [RFC3931]. This MIB module enables the use of any underlying packet switched network (PSN). MIB nodules that will support PW operations over specific PSN types are defined in separate memos. The indexes for this MIB module are also used to index the PSN-specific tables and the PW-specific tables. The PW Type dictates which PW-specific MIB module to use. Copyright (c) 2009 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of Internet Society, IETF or IETF Trust, nor the names of specific contributors, may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This version of this MIB module is part of RFC 5601; see the RFC itself for full legal notices.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.246 | IdentitypwStdMIB | This MIB module contains managed object definitions for pseudowire operation as in Bryant, S. and P. Pate, 'Pseudo Wire Emulation Edge-to-Edge (PWE3) Architect… | ||
| 1.3.6.1.2.1.10.246.0 | NodepwNotifications | |||
| 1.3.6.1.2.1.10.246.0.1 | NotificationpwDown | current | This notification is generated when the pwOperStatus object for one or more contiguous entries in the pwTable are about to enter the down(2) or lowerLayerDown(… | |
| 1.3.6.1.2.1.10.246.0.2 | NotificationpwUp | current | This notification is generated when the pwOperStatus object for one or more contiguous entries in the pwTable are about to enter the up(1) state from some othe… | |
| 1.3.6.1.2.1.10.246.0.3 | NotificationpwDeleted | current | This notification is generated when the PW has been deleted, i.e., when the pwRowStatus has been set to destroy(6) or the PW has been deleted by a non-MIB appl… | |
| 1.3.6.1.2.1.10.246.1 | NodepwObjects | |||
| 1.3.6.1.2.1.10.246.1.1 | ScalarpwIndexNext | read-only | current | This object contains an appropriate value to be used for pwIndex when creating entries in the pwTable. The value 0 indicates that no unassigned entries are ava… |
| 1.3.6.1.2.1.10.246.1.2 | TablepwTable | not-accessible | current | This table specifies information for configuring and status monitoring that is common to all service types and PSN types. |
| 1.3.6.1.2.1.10.246.1.2.1 | RowpwEntry | not-accessible | current | A row in this table represents a pseudowire (PW) virtual connection across a packet network. It is indexed by pwIndex, which uniquely identifies a singular con… |
| 1.3.6.1.2.1.10.246.1.2.1.1 | ColumnpwIndex | not-accessible | current | A unique index for the conceptual row identifying a PW within this table. |
| 1.3.6.1.2.1.10.246.1.2.1.2 | ColumnpwType | read-create | current | This value indicates the emulated service to be carried over this PW. |
| 1.3.6.1.2.1.10.246.1.2.1.3 | ColumnpwOwner | read-create | current | This object is set by the operator to indicate the protocol responsible for establishing this PW. 'manual' is used in all cases where no maintenance protocol (… |
| 1.3.6.1.2.1.10.246.1.2.1.4 | ColumnpwPsnType | read-create | current | This object is set by the operator to indicate the PSN type. Based on this object, the relevant PSN table's entry is created in the PSN-specific MIB modules. |
| 1.3.6.1.2.1.10.246.1.2.1.5 | ColumnpwSetUpPriority | read-create | current | This object defines the relative priority of the PW during set-up in a lowest-to-highest fashion, where 0 is the highest priority. PWs with the same priority a… |
| 1.3.6.1.2.1.10.246.1.2.1.6 | ColumnpwHoldingPriority | read-create | current | This object defines the relative holding priority of the PW in a lowest-to-highest fashion, where 0 is the highest priority. PWs with the same priority are tre… |
| 1.3.6.1.2.1.10.246.1.2.1.8 | ColumnpwPeerAddrType | read-create | current | Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. |
| 1.3.6.1.2.1.10.246.1.2.1.9 | ColumnpwPeerAddr | read-create | current | This object contains the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not appli… |
| 1.3.6.1.2.1.10.246.1.2.1.10 | ColumnpwAttachedPwIndex | read-create | current | If the PW is attached to another PW instead of a local native service, this item indicates the pwIndex of the attached PW. Otherwise, this object MUST be set t… |
| 1.3.6.1.2.1.10.246.1.2.1.11 | ColumnpwIfIndex | read-create | current | This object indicates the ifIndex of the PW if the PW is represented in the ifTable. Otherwise, it MUST be set to zero. |
| 1.3.6.1.2.1.10.246.1.2.1.12 | ColumnpwID | read-create | current | Pseudowire identifier. If the pwOwner object is 'pwIdFecSignaling' or 'l2tpControlProtocol', then this object is signaled in the outgoing PW ID field within th… |
| 1.3.6.1.2.1.10.246.1.2.1.13 | ColumnpwLocalGroupID | read-create | current | Used in the Group ID field sent to the peer PW End Service within the maintenance protocol used for PW setup. It SHOULD be set to zero if a maintenance protoco… |
| 1.3.6.1.2.1.10.246.1.2.1.14 | ColumnpwGroupAttachmentID | read-create | current | This object is an octet string representing the attachment group identifier (AGI) that this PW belongs to, which typically identifies the VPN ID. Applicable if… |
| 1.3.6.1.2.1.10.246.1.2.1.15 | ColumnpwLocalAttachmentID | read-create | current | This object is an octet string representing the local forwarder attachment individual identifier (AII) to be used by this PW. It is used as the Source AII (SAI… |
| 1.3.6.1.2.1.10.246.1.2.1.16 | ColumnpwRemoteAttachmentID | read-create | current | This object is an octet string representing the remote forwarder attachment individual identifier (AII) to be used by this PW. It is used as the TAII for outgo… |
| 1.3.6.1.2.1.10.246.1.2.1.17 | ColumnpwCwPreference | read-create | current | Defines if the control word will be sent with each packet by the local node. Some PW types mandate the use of a control word, and in such cases, the value conf… |
| 1.3.6.1.2.1.10.246.1.2.1.18 | ColumnpwLocalIfMtu | read-create | current | If not equal to zero, the optional IfMtu object in the signaling protocol will be sent with this value, which represents the locally supported MTU size over th… |
| 1.3.6.1.2.1.10.246.1.2.1.19 | ColumnpwLocalIfString | read-create | current | A PW MAY be associated to an interface (or a virtual interface) in the ifTable of the node as part of the service configuration. This object defines if the mai… |
| 1.3.6.1.2.1.10.246.1.2.1.20 | ColumnpwLocalCapabAdvert | read-create | current | If a maintenance protocol is used, it indicates the capabilities the local node will advertise to the peer. The operator MAY selectively assign a partial set o… |
| 1.3.6.1.2.1.10.246.1.2.1.21 | ColumnpwRemoteGroupID | read-only | current | This object is obtained from the Group ID field as received via the maintenance protocol used for PW setup. Value of zero will be reported if not used. Value o… |
| 1.3.6.1.2.1.10.246.1.2.1.22 | ColumnpwCwStatus | read-only | current | If signaling is used for PW establishment, this object indicates the status of the control word negotiation. For either signaling or manual configuration, it i… |
| 1.3.6.1.2.1.10.246.1.2.1.23 | ColumnpwRemoteIfMtu | read-only | current | The remote interface MTU as (optionally) received from the remote node via the maintenance protocol. The object SHOULD report zero if the MTU is not available. |
| 1.3.6.1.2.1.10.246.1.2.1.24 | ColumnpwRemoteIfString | read-only | current | Indicates the interface description string as received by the maintenance protocol. It MUST be a NULL string if a maintenance protocol is not used or the value… |
| 1.3.6.1.2.1.10.246.1.2.1.25 | ColumnpwRemoteCapabilities | read-only | current | Indicates the capabilities as received from the peer. |
| 1.3.6.1.2.1.10.246.1.2.1.26 | ColumnpwFragmentCfgSize | read-create | current | If set to a value other than zero, indicates that fragmentation is desired for this PW. This object MAY be changed only if the PW is not active. |
| 1.3.6.1.2.1.10.246.1.2.1.27 | ColumnpwRmtFragCapability | read-only | current | The status of the fragmentation based on the local configuration and the peer capabilities as received from the peer when a control protocol is used. |
| 1.3.6.1.2.1.10.246.1.2.1.28 | ColumnpwFcsRetentionCfg | read-create | current | The local configuration of Frame Check Sequence (FCS) retention for this PW. FCS retention can be configured for PW types High-Level Data Link Control (HDLC), … |
| 1.3.6.1.2.1.10.246.1.2.1.29 | ColumnpwFcsRetentionStatus | read-only | current | The status of the FCS retention negotiation process based on local configuration and the remote advertisement. remoteIndicationUnknown - set if a FEC has not b… |
| 1.3.6.1.2.1.10.246.1.2.1.30 | ColumnpwOutboundLabel | read-create | current | The PW label used in the outbound direction (i.e., toward the PSN). It might be set manually if pwOwner is 'manual'; otherwise, it is set automatically. For MP… |
| 1.3.6.1.2.1.10.246.1.2.1.31 | ColumnpwInboundLabel | read-create | current | The PW label used in the inbound direction (i.e., packets received from the PSN). It may be set manually if pwOwner is 'manual'; otherwise, it is set automatic… |
| 1.3.6.1.2.1.10.246.1.2.1.32 | ColumnpwName | read-create | current | The canonical name assigned to the PW. This object MAY be changed at any time. |
| 1.3.6.1.2.1.10.246.1.2.1.33 | ColumnpwDescr | read-create | current | A textual string containing information about the PW. If there is no description, this object contains a zero- length string. This object MAY be changed at any… |
| 1.3.6.1.2.1.10.246.1.2.1.34 | ColumnpwCreateTime | read-only | current | The value of sysUpTime at the time this PW was created. |
| 1.3.6.1.2.1.10.246.1.2.1.35 | ColumnpwUpTime | read-only | current | Specifies the time since last change of pwOperStatus to Up(1). |
| 1.3.6.1.2.1.10.246.1.2.1.36 | ColumnpwLastChange | read-only | current | The value of sysUpTime at the time the PW entered its current operational state. If the current state was entered prior to the last re-initialization of the lo… |
| 1.3.6.1.2.1.10.246.1.2.1.37 | ColumnpwAdminStatus | read-create | current | The desired operational status of this PW. This object MAY be set at any time. |
| 1.3.6.1.2.1.10.246.1.2.1.38 | ColumnpwOperStatus | read-only | current | This object indicates the operational status of the PW; it does not reflect the status of the Customer Edge (CE) bound interface. It is set to down only if pwN… |
| 1.3.6.1.2.1.10.246.1.2.1.39 | ColumnpwLocalStatus | read-only | current | Indicates the status of the PW in the local node. The various indications in this object SHOULD be available independent of the ability of the local node to ad… |
| 1.3.6.1.2.1.10.246.1.2.1.40 | ColumnpwRemoteStatusCapable | read-only | current | Indicates the remote node capability to advertise the PW status notification. notApplicable SHOULD be reported for a manually set PW, or if the local node is n… |
| 1.3.6.1.2.1.10.246.1.2.1.41 | ColumnpwRemoteStatus | read-only | current | Indicates the status of the PW as was advertised by the remote. If the remote is not capable of advertising the status object, or the local node is not able to… |
| 1.3.6.1.2.1.10.246.1.2.1.42 | ColumnpwTimeElapsed | read-only | current | The number of seconds, including partial seconds, that have elapsed since the beginning of the current interval measurement period. |
| 1.3.6.1.2.1.10.246.1.2.1.43 | ColumnpwValidIntervals | read-only | current | The number of previous 15-minute intervals for which data was collected. |
| 1.3.6.1.2.1.10.246.1.2.1.44 | ColumnpwRowStatus | read-create | current | For creating, modifying, and deleting this row. This object MAY be changed at any time. |
| 1.3.6.1.2.1.10.246.1.2.1.45 | ColumnpwStorageType | read-create | current | This variable indicates the storage type for this object. |
| 1.3.6.1.2.1.10.246.1.2.1.46 | ColumnpwOamEnable | read-create | current | This variable indicates if OAM is enabled for this PW. It MAY be changed at any time. |
| 1.3.6.1.2.1.10.246.1.2.1.47 | ColumnpwGenAGIType | read-create | current | This variable indicates the AGI type if generalized FEC (129) is used for PW signaling or configuration. It SHOULD return the value of zero otherwise. |
| 1.3.6.1.2.1.10.246.1.2.1.48 | ColumnpwGenLocalAIIType | read-create | current | This object is the type of the local forwarder attachment individual identifier (AII) to be used by this PW if generalized FEC (129) is used for PW signaling o… |
| 1.3.6.1.2.1.10.246.1.2.1.49 | ColumnpwGenRemoteAIIType | read-create | current | This object is the type of the remote forwarder attachment individual identifier (AII) to be used by this PW if generalized FEC (129) is used for PW signaling … |
| 1.3.6.1.2.1.10.246.1.3 | TablepwPerfCurrentTable | not-accessible | current | This table provides per-PW performance information for the current interval. |
| 1.3.6.1.2.1.10.246.1.3.1 | RowpwPerfCurrentEntry | not-accessible | current | An entry in this table is created by the agent for every PW. |
| 1.3.6.1.2.1.10.246.1.3.1.1 | ColumnpwPerfCurrentInHCPackets | read-only | current | High-capacity counter for number of packets received by the PW (from the PSN) in the current 15-minute interval. This is the 64-bit version of pwPerfCurrentInP… |
| 1.3.6.1.2.1.10.246.1.3.1.2 | ColumnpwPerfCurrentInHCBytes | read-only | current | High-capacity counter for number of bytes received by the PW (from the PSN) in the current 15-minute interval. This is the 64-bit version of pwPerfCurrentInByt… |
| 1.3.6.1.2.1.10.246.1.3.1.3 | ColumnpwPerfCurrentOutHCPackets | read-only | current | High-capacity counter for number of packets forwarded by the PW (to the PSN) in the current 15-minute interval. This is the 64-bit version of pwPerfCurrentOutP… |
| 1.3.6.1.2.1.10.246.1.3.1.4 | ColumnpwPerfCurrentOutHCBytes | read-only | current | High-capacity counter for number of bytes forwarded by the PW (to the PSN) in the current 15-minute interval. This is the 64-bit version of pwPerfCurrentOutByt… |
| 1.3.6.1.2.1.10.246.1.3.1.5 | ColumnpwPerfCurrentInPackets | read-only | current | The counter for number of packets received by the PW (from the PSN) in the current 15-minute interval. This is the 32-bit version of pwPerfCurrentInHCPackets, … |
| 1.3.6.1.2.1.10.246.1.3.1.6 | ColumnpwPerfCurrentInBytes | read-only | current | The counter for number of bytes received by the PW (from the PSN) in the current 15-minute interval. It MUST be equal to the least significant 32 bits of pwPer… |
| 1.3.6.1.2.1.10.246.1.3.1.7 | ColumnpwPerfCurrentOutPackets | read-only | current | The counter for number of packets forwarded by the PW (to the PSN) in the current 15-minute interval. It MUST be equal to the least significant 32 bits of pwPe… |
| 1.3.6.1.2.1.10.246.1.3.1.8 | ColumnpwPerfCurrentOutBytes | read-only | current | The counter for number of bytes forwarded by the PW (to the PSN) in the current 15-minute interval. It MUST be equal to the least significant 32 bits of pwPerf… |
| 1.3.6.1.2.1.10.246.1.4 | TablepwPerfIntervalTable | not-accessible | current | This table provides per-PW performance information for each interval. |
| 1.3.6.1.2.1.10.246.1.4.1 | RowpwPerfIntervalEntry | not-accessible | current | An entry in this table is created by the agent for every PW. |
| 1.3.6.1.2.1.10.246.1.4.1.1 | ColumnpwPerfIntervalNumber | not-accessible | current | A number N, between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently com… |
| 1.3.6.1.2.1.10.246.1.4.1.2 | ColumnpwPerfIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.2.1.10.246.1.4.1.3 | ColumnpwPerfIntervalTimeElapsed | read-only | current | The duration of this interval in seconds. |
| 1.3.6.1.2.1.10.246.1.4.1.4 | ColumnpwPerfIntervalInHCPackets | read-only | current | High-capacity counter for number of packets received by the PW (from the PSN) during the interval. This is the 64-bit version of pwPerfIntervalInPackets, if pw… |
| 1.3.6.1.2.1.10.246.1.4.1.5 | ColumnpwPerfIntervalInHCBytes | read-only | current | High-capacity counter for number of bytes received by the PW (from the PSN) during the interval. This is the 64-bit version of pwPerfIntervalInBytes, if pwPerf… |
| 1.3.6.1.2.1.10.246.1.4.1.6 | ColumnpwPerfIntervalOutHCPackets | read-only | current | High-capacity counter for number of packets forwarded by the PW (to the PSN) during the interval. This is the 64-bit version of pwPerfIntervalOutPackets, if pw… |
| 1.3.6.1.2.1.10.246.1.4.1.7 | ColumnpwPerfIntervalOutHCBytes | read-only | current | High-capacity counter for number of bytes forwarded by the PW (to the PSN) during the interval. This is the 64-bit version of pwPerfIntervalOutBytes, if pwPerf… |
| 1.3.6.1.2.1.10.246.1.4.1.8 | ColumnpwPerfIntervalInPackets | read-only | current | This value represents the number of packets received by this PW during the interval. It MUST be equal to the least significant 32 bits of pwPerfIntervalInHCPac… |
| 1.3.6.1.2.1.10.246.1.4.1.9 | ColumnpwPerfIntervalInBytes | read-only | current | This value represents the number of bytes received by this PW during the interval. It MUST be equal to the least significant 32 bits of pwPerfIntervalInHCBytes… |
| 1.3.6.1.2.1.10.246.1.4.1.10 | ColumnpwPerfIntervalOutPackets | read-only | current | This value represents the number of packets sent by this PW during the interval. It MUST be equal to the least significant 32 bits of pwPerfIntervalOutHCPacket… |
| 1.3.6.1.2.1.10.246.1.4.1.11 | ColumnpwPerfIntervalOutBytes | read-only | current | This value represents the number of bytes sent by this PW during the interval. It MUST be equal to the least significant 32 bits of pwPerfIntervalOutHCBytes, i… |
| 1.3.6.1.2.1.10.246.1.5 | TablepwPerf1DayIntervalTable | not-accessible | current | This table provides per-PW performance information for the current day's measurement and the previous day's interval. |
| 1.3.6.1.2.1.10.246.1.5.1 | RowpwPerf1DayIntervalEntry | not-accessible | current | An entry in this table is created by the agent for every PW. |
| 1.3.6.1.2.1.10.246.1.5.1.1 | ColumnpwPerf1DayIntervalNumber | not-accessible | current | History Data Interval number. Interval 1 is the current day's measurement period, interval 2 is the most recent previous day, and interval 30 is 31 days ago. I… |
| 1.3.6.1.2.1.10.246.1.5.1.2 | ColumnpwPerf1DayIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.2.1.10.246.1.5.1.3 | ColumnpwPerf1DayIntervalTimeElapsed | read-only | current | The number of seconds in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval … |
| 1.3.6.1.2.1.10.246.1.5.1.4 | ColumnpwPerf1DayIntervalInHCPackets | read-only | current | High-capacity counter for the total number of packets received by the PW (from the PSN). |
| 1.3.6.1.2.1.10.246.1.5.1.5 | ColumnpwPerf1DayIntervalInHCBytes | read-only | current | High-capacity counter for the total number of bytes received by the PW (from the PSN). |
| 1.3.6.1.2.1.10.246.1.5.1.6 | ColumnpwPerf1DayIntervalOutHCPackets | read-only | current | High-capacity counter for the total number of packets forwarded by the PW (to the PSN). |
| 1.3.6.1.2.1.10.246.1.5.1.7 | ColumnpwPerf1DayIntervalOutHCBytes | read-only | current | High-capacity counter for the total number of bytes forwarded by the PW (to the PSN). |
| 1.3.6.1.2.1.10.246.1.6 | ScalarpwPerfTotalErrorPackets | read-only | current | Counter for number of errors at the PW processing level, for example, packets received with unknown PW label. |
| 1.3.6.1.2.1.10.246.1.7 | TablepwIndexMappingTable | not-accessible | current | This table enables the reverse mapping of the unique PWid parameters [peer IP, PW type, and PW ID] and the pwIndex. The table is not applicable for PWs created… |
| 1.3.6.1.2.1.10.246.1.7.1 | RowpwIndexMappingEntry | not-accessible | current | An entry in this table MUST be created by the agent for every PW created by the pwTable for which pwOwner equals pwIdFecSignaling and pwID is not zero. Impleme… |
| 1.3.6.1.2.1.10.246.1.7.1.1 | ColumnpwIndexMappingPwType | not-accessible | current | The PW type (indicates the service) of this PW. |
| 1.3.6.1.2.1.10.246.1.7.1.2 | ColumnpwIndexMappingPwID | not-accessible | current | The PW ID of this PW. Zero if the PW is configured manually. |
| 1.3.6.1.2.1.10.246.1.7.1.3 | ColumnpwIndexMappingPeerAddrType | not-accessible | current | IP address type of the peer node. |
| 1.3.6.1.2.1.10.246.1.7.1.4 | ColumnpwIndexMappingPeerAddr | not-accessible | current | IP address of the peer node. |
| 1.3.6.1.2.1.10.246.1.7.1.5 | ColumnpwIndexMappingPwIndex | read-only | current | The value that represents the PW in the pwTable. |
| 1.3.6.1.2.1.10.246.1.8 | TablepwPeerMappingTable | not-accessible | current | This table provides reverse mapping of the existing PW based on PW type and PW ID ordering. This table is typically useful for the element management system (E… |
| 1.3.6.1.2.1.10.246.1.8.1 | RowpwPeerMappingEntry | not-accessible | current | An entry in this table is created by the agent for every PW entry in the pwTable. Implementers need to be aware that if the value of the pwPeerMappingPeerAddr … |
| 1.3.6.1.2.1.10.246.1.8.1.1 | ColumnpwPeerMappingPeerAddrType | not-accessible | current | IP address type of the peer node. |
| 1.3.6.1.2.1.10.246.1.8.1.2 | ColumnpwPeerMappingPeerAddr | not-accessible | current | IP address of the peer node. |
| 1.3.6.1.2.1.10.246.1.8.1.3 | ColumnpwPeerMappingPwType | not-accessible | current | The PW type (indicates the emulated service) of this PW. |
| 1.3.6.1.2.1.10.246.1.8.1.4 | ColumnpwPeerMappingPwID | not-accessible | current | The PW ID of this PW. Zero if the PW is configured manually. |
| 1.3.6.1.2.1.10.246.1.8.1.5 | ColumnpwPeerMappingPwIndex | read-only | current | The value that represents the PW in the pwTable. |
| 1.3.6.1.2.1.10.246.1.9 | ScalarpwUpDownNotifEnable | read-write | current | If this object is set to true(1), then it enables the emission of pwUp and pwDown notifications; otherwise, these notifications are not emitted. |
| 1.3.6.1.2.1.10.246.1.10 | ScalarpwDeletedNotifEnable | read-write | current | If this object is set to true(1), then it enables the emission of pwDeleted notification; otherwise, this notification is not emitted. |
| 1.3.6.1.2.1.10.246.1.11 | ScalarpwNotifRate | read-write | current | This object defines the maximum number of PW notifications that can be emitted from the device per second. |
| 1.3.6.1.2.1.10.246.1.12 | TablepwGenFecIndexMappingTable | not-accessible | current | This table enables the reverse mapping of the unique PWid parameters [GroupAttachmentID, LocalAttachmentID, and PeerAttachmentID] and the pwIndex. The table is… |
| 1.3.6.1.2.1.10.246.1.12.1 | RowpwGenFecIndexMappingEntry | not-accessible | current | An entry in this table MUST be created by the agent for every PW created by the pwTable for which pwOwner equals genFecSignaling. Implementers need to be aware… |
| 1.3.6.1.2.1.10.246.1.12.1.1 | ColumnpwGenFecIndexMappingAGIType | not-accessible | current | This object is the type of the attachment group identifier (AGI) that this PW belongs to. |
| 1.3.6.1.2.1.10.246.1.12.1.2 | ColumnpwGenFecIndexMappingAGI | not-accessible | current | This object is an octet string representing the attachment group identifier (AGI) that this PW belongs to, which typically identifies the VPN ID. |
| 1.3.6.1.2.1.10.246.1.12.1.3 | ColumnpwGenFecIndexMappingLocalAIIType | not-accessible | current | This object is the type of the local forwarder attachment individual identifier (AII) to be used by this PW. |
| 1.3.6.1.2.1.10.246.1.12.1.4 | ColumnpwGenFecIndexMappingLocalAII | not-accessible | current | This object is an octet string representing the local forwarder attachment individual identifier (AII) to be used by this PW. It is used as the SAII for outgoi… |
| 1.3.6.1.2.1.10.246.1.12.1.5 | ColumnpwGenFecIndexMappingRemoteAIIType | not-accessible | current | This object is the type of the remote forwarder attachment individual identifier (AII) to be used by this PW. |
| 1.3.6.1.2.1.10.246.1.12.1.6 | ColumnpwGenFecIndexMappingRemoteAII | not-accessible | current | This object is an octet string representing the peer forwarder attachment individual identifier (AII) to be used by this PW. It is used as the TAII for outgoin… |
| 1.3.6.1.2.1.10.246.1.12.1.7 | ColumnpwGenFecIndexMappingPwIndex | read-only | current | The value that represents the PW in the pwTable. |
| 1.3.6.1.2.1.10.246.2 | NodepwConformance | |||
| 1.3.6.1.2.1.10.246.2.1 | NodepwGroups | |||
| 1.3.6.1.2.1.10.246.2.1.1 | GrouppwBasicGroup | current | Collection of objects that are required in all implementations that support the PW MIB module. | |
| 1.3.6.1.2.1.10.246.2.1.2 | GrouppwPwIdGroup | current | Collection of objects required for PW ID configuration and signaling. | |
| 1.3.6.1.2.1.10.246.2.1.3 | GrouppwGeneralizedFecGroup | current | Collection of objects required for generalized FEC configuration and signaling. | |
| 1.3.6.1.2.1.10.246.2.1.4 | GrouppwFcsGroup | current | Collection of objects required for FCS retention configuration and signaling. | |
| 1.3.6.1.2.1.10.246.2.1.5 | GrouppwFragGroup | current | Collection of objects required for fragmentation configuration and signaling. | |
| 1.3.6.1.2.1.10.246.2.1.6 | GrouppwPwStatusGroup | current | Collection of objects required for PW status configuration and signaling. | |
| 1.3.6.1.2.1.10.246.2.1.7 | GrouppwGetNextGroup | current | Collection of objects for getting the next available index. | |
| 1.3.6.1.2.1.10.246.2.1.8 | GrouppwPriorityGroup | current | Collection of objects for controlling the PW setup and holding priority. | |
| 1.3.6.1.2.1.10.246.2.1.9 | GrouppwAttachmentGroup | current | Collection of objects for PW configuration as ifIndex. | |
| 1.3.6.1.2.1.10.246.2.1.10 | GrouppwPerformanceGeneralGroup | current | Collection of general objects needed for managing the total running performance parameters. | |
| 1.3.6.1.2.1.10.246.2.1.11 | GrouppwPeformance1DayIntervalGroup | current | Collection of objects needed for a PW running 1-day interval performance collection. | |
| 1.3.6.1.2.1.10.246.2.1.12 | GrouppwPerformanceIntervalGeneralGroup | current | Collection of general objects needed for managing the interval performance parameters. | |
| 1.3.6.1.2.1.10.246.2.1.13 | GrouppwPeformanceIntervalGroup | current | Collection of 32-bit objects needed for PW performance collection in 15-minute intervals. | |
| 1.3.6.1.2.1.10.246.2.1.14 | GrouppwHCPeformanceIntervalGroup | current | Collection of HC objects needed for PW performance collection in 15-minute intervals. | |
| 1.3.6.1.2.1.10.246.2.1.15 | GrouppwMappingTablesGroup | current | Collection of objects contained in the reverse mapping tables. | |
| 1.3.6.1.2.1.10.246.2.1.16 | GrouppwNotificationControlGroup | current | Collection of objects for controlling the PW notifications. | |
| 1.3.6.1.2.1.10.246.2.1.17 | GrouppwNotificationGroup | current | Collection of PW notifications objects. | |
| 1.3.6.1.2.1.10.246.2.1.18 | GrouppwSignalingGroup | current | Collection of objects for use in implementations that support the PW signaling. | |
| 1.3.6.1.2.1.10.246.2.2 | NodepwCompliances | |||
| 1.3.6.1.2.1.10.246.2.2.1 | CompliancepwModuleFullCompliance | read-only | current | The compliance statement for agents that provide full support for the PW MIB module. Such devices can then be monitored and configured using this MIB module. |
| 1.3.6.1.2.1.10.246.2.2.2 | CompliancepwModuleReadOnlyCompliance | read-only | current | The compliance statement for agents that provide read- only support for the PW MIB module. Such devices can then be monitored but cannot be configured using th… |