Partition-MIB
176 objects
The network element partitioning MIB.
Imported Objects
| INET-ADDRESS-MIB | InetAddress |
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | PhysAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2000 | Nodemsf | |||
| 1.3.6.1.4.1.2000 | Identitypartition | The network element partitioning MIB. | ||
| 1.3.6.1.4.1.2000.1 | NodeswitchConfig | |||
| 1.3.6.1.4.1.2000.1.1 | ScalarnumRoutingEntries | read-only | current | The number of routing table entries of this switch. This value is ignored if the switch has only per port routing tables (i.e., no switch-wide routing table) |
| 1.3.6.1.4.1.2000.1.2 | ScalarswitchPortConfigNumPorts | read-only | current | Number of ports in this switch |
| 1.3.6.1.4.1.2000.1.3 | TableswitchPortConfigTable | not-accessible | current | Resource configuration for each port on the switch |
| 1.3.6.1.4.1.2000.1.3.1 | RowswitchPortConfigEntry | not-accessible | current | This table gives the resources configured for the various ports at the switch level |
| 1.3.6.1.4.1.2000.1.3.1.1 | ColumnswitchPortConfigPortID | read-only | current | This is the physical port id |
| 1.3.6.1.4.1.2000.1.3.1.2 | ColumnswitchPortConfigPortLabelType | read-only | current | Indicates the type of protocol for labels at this port. |
| 1.3.6.1.4.1.2000.1.3.1.3 | ColumnswitchPortConfigNumBWs | read-only | current | Number of equivalent bandwidths for this port in the incoming and outgoing directions. |
| 1.3.6.1.4.1.2000.1.3.1.4 | ColumnswitchPortConfigNumLabelRanges | read-only | current | Number of label ranges for this port. |
| 1.3.6.1.4.1.2000.1.3.1.5 | ColumnswitchNumRoutingEntries | read-only | current | Number of routing entries for this port. |
| 1.3.6.1.4.1.2000.1.3.1.6 | ColumnswitchPortAllowsSci | read-write | current | Indicates whether this port can be used to connect to the SCI. |
| 1.3.6.1.4.1.2000.1.4 | TableperformanceParamTable | not-accessible | current | Table giving the configured performance targets for this switch |
| 1.3.6.1.4.1.2000.1.4.1 | RowperformanceParamEntry | not-accessible | current | This table entry gives each performance target parameters |
| 1.3.6.1.4.1.2000.1.4.1.1 | ColumnperformanceParamIndex | read-write | current | Identifies each performance target |
| 1.3.6.1.4.1.2000.1.4.1.2 | ColumnperformancePLR | read-only | current | This indicates the packet loss ratio |
| 1.3.6.1.4.1.2000.1.4.1.3 | ColumnperformanceMaxDelay | read-only | current | This indicates the maximum packet delay |
| 1.3.6.1.4.1.2000.1.4.1.4 | ColumnperformanceDelayOverProb | read-only | current | This indicates the possibility that the packet delay is bigger than the maximum delay allowed |
| 1.3.6.1.4.1.2000.1.5 | TableswitchPortConfigBWTable | not-accessible | current | Table giving the configured equivalent bandwidths for the various switch ports |
| 1.3.6.1.4.1.2000.1.5.1 | RowswitchPortConfigBWEntry | not-accessible | current | This table gives the per port equivalent bandwidths |
| 1.3.6.1.4.1.2000.1.5.1.1 | ColumnswitchPortConfigBWPortID | read-write | current | Identifies the switch port number |
| 1.3.6.1.4.1.2000.1.5.1.2 | ColumnswitchPortConfigBWID | read-write | current | This is the equivalent bandwidth ID in the switch |
| 1.3.6.1.4.1.2000.1.5.1.3 | ColumnswitchPortConfigEqiBW | read-write | current | Indicates the equivalent bandwidth for this port. |
| 1.3.6.1.4.1.2000.1.5.1.4 | ColumnswitchPortPerformanceIndex | read-only | current | Indicates an entry in the performanceParamTable which represents the performance target associated with this equivalent bandwidth |
| 1.3.6.1.4.1.2000.1.5.1.5 | ColumnswitchPortConfigBWPortDirection | read-only | current | Indicates the direction for which this equivalent bandwidth is valid |
| 1.3.6.1.4.1.2000.1.6 | TableswitchPortConfigLabelRangeTable | not-accessible | current | Table giving the configured label range information for the various switch ports |
| 1.3.6.1.4.1.2000.1.6.1 | RowswitchPortConfigLabelRangeEntry | not-accessible | current | This table gives the per port label ranges |
| 1.3.6.1.4.1.2000.1.6.1.1 | ColumnswitchPortConfigLabelRangePortID | read-write | current | Identifies the port to which this range belongs |
| 1.3.6.1.4.1.2000.1.6.1.2 | ColumnswitchPortConfigLabelRangeID | read-write | current | Identifies a certain label range for the port. For any port, its label ranges are sequentially numbered from 1 to switchPortConfigNumLabelRanges defined in swi… |
| 1.3.6.1.4.1.2000.1.6.1.3 | ColumnswitchPortConfigLabelRangePortDirection | read-only | current | Indicates the direction for which this range is valid |
| 1.3.6.1.4.1.2000.1.6.1.4 | ColumnswitchPortConfigLabelRangeIndex | read-only | current | The index into the protocol-dependent label range table. |
| 1.3.6.1.4.1.2000.1.7 | TableatmLabelRangeTable | not-accessible | current | Table giving the configured ATM label range information for the various switch ports |
| 1.3.6.1.4.1.2000.1.7.1 | RowatmLabelRangeEntry | not-accessible | current | This table gives the per port ATM label ranges and capabilities. |
| 1.3.6.1.4.1.2000.1.7.1.1 | ColumnatmLabelRangeIndex | read-write | current | Index into this table. |
| 1.3.6.1.4.1.2000.1.7.1.2 | ColumnatmLabelRangeMinVpiVci | read-only | current | Lower bound of the vpi and vci range. |
| 1.3.6.1.4.1.2000.1.7.1.3 | ColumnatmLabelRangeMaxVpiVci | read-only | current | Upper bound of the vpi and vci range. |
| 1.3.6.1.4.1.2000.1.7.1.4 | ColumnatmLabelRangeAllowsVP | read-only | current | Indicates whether this label range can be used for VP connections. |
| 1.3.6.1.4.1.2000.1.7.1.5 | ColumnatmLabelRangeAllowsP2MP | read-only | current | Indicates whether this label range can be used to create point-to-multipoint connections. |
| 1.3.6.1.4.1.2000.1.7.1.6 | ColumnatmLabelRangeAllowsMP2P | read-only | current | Indicates whether this label range can be used to create multipoint-to-point connections. |
| 1.3.6.1.4.1.2000.1.7.1.7 | ColumnatmLabelRangeMaxMulticast | read-only | current | Indicates the maximum number of multicast connections that can be created within this range. |
| 1.3.6.1.4.1.2000.1.8 | TablefrLabelRangeTable | not-accessible | current | Table giving the configured label range information for the various frame relay ports. |
| 1.3.6.1.4.1.2000.1.8.1 | RowfrLabelRangeEntry | not-accessible | current | This table gives the per port label ranges |
| 1.3.6.1.4.1.2000.1.8.1.1 | ColumnfrLabelRangeIndex | read-write | current | Index into this table. |
| 1.3.6.1.4.1.2000.1.8.1.2 | ColumnfrLabelRangeMinDLCI | read-only | current | Lower bound of the DLCI range for this Frame Relay interface. |
| 1.3.6.1.4.1.2000.1.8.1.3 | ColumnfrLabelRangeMaxDLCI | read-only | current | Upper bound of the DLCI range for this Frame Relay interface. |
| 1.3.6.1.4.1.2000.1.9 | TablevlanLabelRangeTable | not-accessible | current | Table giving the configured label range information for the VLAN-aware Ethernet ports. |
| 1.3.6.1.4.1.2000.1.9.1 | RowvlanLabelRangeEntry | not-accessible | current | This table gives the per port VLAN ID ranges |
| 1.3.6.1.4.1.2000.1.9.1.1 | ColumnvlanLabelRangeIndex | read-write | current | Index into this table. |
| 1.3.6.1.4.1.2000.1.9.1.2 | ColumnvlanLabelRangeMinID | read-only | current | Lower bound of the VLAN ID range on this VLAN-aware Ethernet switch interface. |
| 1.3.6.1.4.1.2000.1.9.1.3 | ColumnvlanLabelRangeMaxID | read-only | current | Upper bound of the VLAN ID range on this VLAN-aware Ethernet switch interface. |
| 1.3.6.1.4.1.2000.1.10 | TablemplsLabelRangeTable | not-accessible | current | Table giving the configured label range information for MPLS ports. |
| 1.3.6.1.4.1.2000.1.10.1 | RowmplsLabelRangeEntry | not-accessible | current | This table gives the per port MPLS ranges. |
| 1.3.6.1.4.1.2000.1.10.1.1 | ColumnmplsLabelRangeIndex | read-write | current | Index into this table. |
| 1.3.6.1.4.1.2000.1.10.1.2 | ColumnmplsLabelRangeMinID | read-only | current | Lower bound of the MPLS label range. |
| 1.3.6.1.4.1.2000.1.10.1.3 | ColumnmplsLabelRangeMaxID | read-only | current | Upper bound of the MPLS label range. |
| 1.3.6.1.4.1.2000.1.11 | TableipLabelRangeTable | not-accessible | current | Table giving the configured IP ranges for IP ports. |
| 1.3.6.1.4.1.2000.1.11.1 | RowipLabelRangeEntry | not-accessible | current | This table gives the per port IP ranges. |
| 1.3.6.1.4.1.2000.1.11.1.1 | ColumnipLabelRangeIndex | read-write | current | Index into this table. |
| 1.3.6.1.4.1.2000.1.11.1.2 | ColumnipLabelRangeIP | read-only | current | Indicates the IP address for a particular network. |
| 1.3.6.1.4.1.2000.1.11.1.3 | ColumnipLabelRangeIPMask | read-only | current | Indicates the subnet's mask address. |
| 1.3.6.1.4.1.2000.1.13 | TablevsVlanLabelRangeTable | not-accessible | current | Table giving the configured label range information for the VLAN-aware Ethernet ports. |
| 1.3.6.1.4.1.2000.1.13.1 | RowvsVlanLabelRangeEntry | not-accessible | current | This table gives the per port VLAN ID ranges |
| 1.3.6.1.4.1.2000.1.13.1.1 | ColumnvsVlanLabelRangeIndex | read-write | current | Index into this table. |
| 1.3.6.1.4.1.2000.1.13.1.2 | ColumnvsVlanLabelRangeMinID | read-write | current | Lower bound of the VLAN ID range on this VLAN-aware Ethernet switch interface. |
| 1.3.6.1.4.1.2000.1.13.1.3 | ColumnvsVlanLabelRangeMaxID | read-write | current | Upper bound of the VLAN ID range on this VLAN-aware Ethernet switch interface. |
| 1.3.6.1.4.1.2000.1.13.1.4 | ColumnvsVlanLabelRangeRowStatus | read-write | current | Used to create and delete this row. |
| 1.3.6.1.4.1.2000.2 | NodevSwitchConfig | |||
| 1.3.6.1.4.1.2000.2.1 | ScalarnumberOfVirtualSwitches | read-only | current | The number of virtual switches that have been currently configured on this switch |
| 1.3.6.1.4.1.2000.2.2 | TablevSwitchConfigTable | not-accessible | current | Each row in this table describes a virtual switch that has been created on this switch |
| 1.3.6.1.4.1.2000.2.2.1 | RowvSwitchConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.2000.2.2.1.1 | ColumnvSwitchConfigVsID | read-write | current | Identifies the virtual switch within this switch |
| 1.3.6.1.4.1.2000.2.2.1.2 | ColumnvSwitchAdminStatus | read-write | current | The administrative state of the virtual switch. A virtual switch's administrative status can not be up until all the necessary parameters for this virtual swit… |
| 1.3.6.1.4.1.2000.2.2.1.3 | ColumnvSwitchOperStatus | read-only | current | The current operational state of the virtual switch |
| 1.3.6.1.4.1.2000.2.2.1.4 | ColumnvSwitchNumCtrls | read-only | current | The number of controllers for this virtual switch |
| 1.3.6.1.4.1.2000.2.2.1.5 | ColumnvSwitchNumPorts | read-only | current | The number of virtual ports in this virtual switch |
| 1.3.6.1.4.1.2000.2.2.1.6 | ColumnvSwitchNumSynPorts | read-only | current | The number of synthetic ports in this virtual switch |
| 1.3.6.1.4.1.2000.2.2.1.7 | ColumnvSwitchPortNumRoutingEntries | read-only | current | The number of routing table entries allocated to this virtual port from the physical port. This value is used only if the switch has per port routing tables |
| 1.3.6.1.4.1.2000.2.2.1.8 | ColumnvSwitchTableOwner | read-write | current | Standard owner string (rowstatus convention) |
| 1.3.6.1.4.1.2000.2.2.1.9 | ColumnvSwitchTableRowStatus | read-write | current | Used in creating/deleting the row |
| 1.3.6.1.4.1.2000.2.3 | TablevSwitchCtrlConfigTable | not-accessible | current | This table gives the controllers configured for the VS |
| 1.3.6.1.4.1.2000.2.3.1 | RowvSwitchCtrlConfigEntry | not-accessible | current | Configuration for a controller for the VS |
| 1.3.6.1.4.1.2000.2.3.1.1 | ColumnvSwitchCtrlVsID | read-write | current | Identifies the virtual switch within this switch |
| 1.3.6.1.4.1.2000.2.3.1.2 | ColumnvSwitchCtrlID | read-write | current | Identifies the virtual switch controller across the SCI |
| 1.3.6.1.4.1.2000.2.3.1.3 | ColumnvSwitchSciType | read-write | current | The switch control protocol used to control this virtual switch |
| 1.3.6.1.4.1.2000.2.3.1.4 | ColumnvSwitchNumCurrentControllers | read-only | current | The number of controllers currently connected to this VS |
| 1.3.6.1.4.1.2000.2.3.1.5 | ColumnvSwitchCtrlConfigTableRowStatus | read-write | current | Used in creating/deleting the row |
| 1.3.6.1.4.1.2000.2.4 | TablevSwitchEthernetCtrlTable | not-accessible | current | Table giving the source MAC of the controller for this virtual switch. |
| 1.3.6.1.4.1.2000.2.4.1 | RowvSwitchEthernetCtrlEntry | not-accessible | current | Table giving the source MAC of the controller for this virtual switch. |
| 1.3.6.1.4.1.2000.2.4.1.1 | ColumnvSwitchEthernetConfigVsID | read-write | current | Identifies the virtual switch within this switch |
| 1.3.6.1.4.1.2000.2.4.1.2 | ColumnvSwitchEthernetCtrlID | read-write | current | Identifies the virtual switch controller across the SCI |
| 1.3.6.1.4.1.2000.2.4.1.3 | ColumnvSwitchEthernetCtrlSourceMAC | read-write | current | The source MAC to be used for the controller of this virtual switch. |
| 1.3.6.1.4.1.2000.2.5 | TablevSwitchAtmCtrlTable | not-accessible | current | Table giving the VPI/VCI used by a protocol to control a virtual switch. |
| 1.3.6.1.4.1.2000.2.5.1 | RowvSwitchAtmCtrlEntry | not-accessible | current | Table giving the VPI/VCI used by a protocol to control a virtual switch. |
| 1.3.6.1.4.1.2000.2.5.1.1 | ColumnvSwitchAtmCtrlLabelIndex | read-write | current | Identifies the virtual switch within this switch |
| 1.3.6.1.4.1.2000.2.5.1.2 | ColumnvSwitchAtmCtrlID | read-write | current | Identifies the virtual switch controller across the SCI |
| 1.3.6.1.4.1.2000.2.5.1.3 | ColumnvSwitchAtmCtrlLabelVpi | read-write | current | The VPI on which the control messages are exchanged. |
| 1.3.6.1.4.1.2000.2.5.1.4 | ColumnvSwitchAtmCtrlLabelVci | read-write | current | The VCI on which the control messages are exchanged. |
| 1.3.6.1.4.1.2000.2.6 | TablevSwitchTcpCtrlTable | not-accessible | current | Table giving the TCP port number used by a protocol to control a virtual switch. |
| 1.3.6.1.4.1.2000.2.6.1 | RowvSwitchTcpCtrlEntry | not-accessible | current | Table giving the TCP port number used by a protocol to control a virtual switch. |
| 1.3.6.1.4.1.2000.2.6.1.1 | ColumnvSwitchTcpCtrlPortIndex | read-write | current | Identifies the virtual switch within this switch |
| 1.3.6.1.4.1.2000.2.6.1.2 | ColumnvSwitchTcpCtrlID | read-write | current | Identifies the virtual switch controller across the SCI |
| 1.3.6.1.4.1.2000.2.6.1.3 | ColumnvSwitchTcpCtrlPortNumber | read-write | current | The local port number used to control the virtual switch. |
| 1.3.6.1.4.1.2000.2.6.1.3 | ColumnvSwitchTcpCtrlSourceIP | read-write | current | The source subnet or specific IP address from which the controller of the virtual switch must originate. |
| 1.3.6.1.4.1.2000.2.6.1.4 | ColumnvSwitchTcpCtrlSourceNetmask | read-write | current | The source subnet mask (255.255.255.255 to specify a specific IP address) from which the controller of the virtual switch must originate. |
| 1.3.6.1.4.1.2000.2.7 | TablevSwitchCurCtrlsTable | not-accessible | current | Table giving the addresses of controllers currently connected to a virtual switch. |
| 1.3.6.1.4.1.2000.2.7.1 | RowvSwitchCurCtrlEntry | not-accessible | current | The virtual switch and the address of one of the currently connected controllers. |
| 1.3.6.1.4.1.2000.2.7.1.1 | ColumnvSwitchCurCtrlVS | read-only | current | Identifies the virtual switch within this switch |
| 1.3.6.1.4.1.2000.2.7.1.2 | ColumnvSwitchCurCtrlAddr | read-only | current | The Internet address by which this controller can be contacted |
| 1.3.6.1.4.1.2000.2.7.1.3 | ColumnvSwitchCurCtrlType | read-only | current | The type of connected controller |
| 1.3.6.1.4.1.2000.2.8 | TablevSwitchPortConfigTable | not-accessible | current | Resource configuration for the virtual ports |
| 1.3.6.1.4.1.2000.2.8.1 | RowvSwitchPortConfigEntry | not-accessible | current | This table gives the per port resource configured for the virtual switch. The vSwitchPortConfigVSID and vSwitchVirtualPortID combination must be unique between… |
| 1.3.6.1.4.1.2000.2.8.1.1 | ColumnvSwitchPortConfigVSID | read-write | current | This is the virtual switch ID of the virtual switch |
| 1.3.6.1.4.1.2000.2.8.1.2 | ColumnvSwitchVirtualPortID | read-write | current | This is the virtual port id in that virtual switch |
| 1.3.6.1.4.1.2000.2.8.1.3 | ColumnvSwitchPhysicalPortNumber | read-write | current | The physical port number that is mapped to virtual port |
| 1.3.6.1.4.1.2000.2.8.1.4 | ColumnvSwitchPortConfigPortNumBWs | read-only | current | Number of equivalent bandwidth pointing to different performance targets (packet loss ratio and delay)in both incoming and outgoing directions for this port. |
| 1.3.6.1.4.1.2000.2.8.1.5 | ColumnvSwitchPortConfigNumLabelRanges | read-only | current | Number of label ranges for this port. The label can be of different types depending on the interface service type. |
| 1.3.6.1.4.1.2000.2.8.1.5 | ColumnvSwitchPortConfigRowStatus | read-write | current | Used in creating/deleting the row |
| 1.3.6.1.4.1.2000.2.9 | TablevSwitchPortConfigBWTable | not-accessible | current | Table giving the configured bandwidth information for the various virtual ports |
| 1.3.6.1.4.1.2000.2.9.1 | RowvSwitchPortConfigBWEntry | not-accessible | current | This table gives the configured bandwidth information for the various virtual ports |
| 1.3.6.1.4.1.2000.2.9.1.1 | ColumnvSwitchBWConfigVSID | read-write | current | This is the virtual switch ID of the virtual switch |
| 1.3.6.1.4.1.2000.2.9.1.2 | ColumnvSwitchBWVirtualPortID | read-write | current | This is the virtual port id in the current virtual switch |
| 1.3.6.1.4.1.2000.2.9.1.3 | ColumnvSwitchPortConfigBWID | read-write | current | This is the equivalent bandwidth ID in the current virtual switch |
| 1.3.6.1.4.1.2000.2.9.1.4 | ColumnvSwitchPortConfigEqiBW | read-write | current | Indicates the equivalent bandwidth assigned to this VS |
| 1.3.6.1.4.1.2000.2.9.1.5 | ColumnvSwitchBWPerformanceIndex | read-write | current | Indicates an entry in the performanceParamTable which represents the performance target associated to by this equivalent bandwidth |
| 1.3.6.1.4.1.2000.2.9.1.6 | ColumnvSwitchPortConfigBWPortDirection | read-write | current | Indicates the direction for which this equivalent bandwidth is valid |
| 1.3.6.1.4.1.2000.2.9.1.7 | ColumnvSwitchPortConfigBWRowStatus | read-write | current | Used in creation/deletion of the row |
| 1.3.6.1.4.1.2000.2.10 | TablevSwitchPortConfigLabelRangeTable | not-accessible | current | Table giving the configured label range information for the various virtual ports |
| 1.3.6.1.4.1.2000.2.10.1 | RowvSwitchPortConfigLabelRangeEntry | not-accessible | current | This table gives the per port label ranges configured for the virtual switch. |
| 1.3.6.1.4.1.2000.2.10.1.1 | ColumnvSwitchLRTConfigVSID | read-write | current | This is the virtual switch ID of the virtual switch |
| 1.3.6.1.4.1.2000.2.10.1.2 | ColumnvSwitchLRTVirtualPortID | read-write | current | This is the virtual port id in the current virtual switch |
| 1.3.6.1.4.1.2000.2.10.1.3 | ColumnvSwitchPortConfigLabelRangeID | read-write | current | Identifies the label range |
| 1.3.6.1.4.1.2000.2.10.1.4 | ColumnvSwitchPortConfigPortDirection | read-write | current | Indicates the direction for which this range is valid |
| 1.3.6.1.4.1.2000.2.10.1.5 | ColumnvSwitchPortConfigLabelRangeType | read-write | current | Indicates the type of protocol for this label range. |
| 1.3.6.1.4.1.2000.2.10.1.6 | ColumnvSwitchPortConfigLabelRangeIndex | read-write | current | The index into the protocol-dependent label range table for this virtual switch. |
| 1.3.6.1.4.1.2000.2.10.1.7 | ColumnvSwitchPortConfigLabelRowStatus | read-write | current | Used in creation/deletion of row. |
| 1.3.6.1.4.1.2000.2.11 | TablevsAtmLabelRangeTable | not-accessible | current | Table giving the configured ATM label range information for the various switch ports on this virtual switch. |
| 1.3.6.1.4.1.2000.2.11.1 | RowvsAtmLabelRangeEntry | not-accessible | current | This table gives the per port ATM label ranges and capabilities. |
| 1.3.6.1.4.1.2000.2.11.1.1 | ColumnvsAtmLabelRangeIndex | read-write | current | Index into this table. |
| 1.3.6.1.4.1.2000.2.11.1.2 | ColumnvsAtmLabelRangeMinVpiVci | read-write | current | Lower bound of the vpi and vci range. |
| 1.3.6.1.4.1.2000.2.11.1.3 | ColumnvsAtmLabelRangeMaxVpiVci | read-write | current | Upper bound of the vpi and vci range. |
| 1.3.6.1.4.1.2000.2.11.1.4 | ColumnvsAtmLabelRangeAllowsVP | read-write | current | Indicates whether this label range can be used for VP connections. |
| 1.3.6.1.4.1.2000.2.11.1.5 | ColumnvsAtmLabelRangeAllowsP2MP | read-write | current | Indicates whether this label range can be used to create point-to-multipoint connections. |
| 1.3.6.1.4.1.2000.2.11.1.6 | ColumnvsAtmLabelRangeAllowsMP2P | read-write | current | Indicates whether this label range can be used to create multipoint-to-point connections. |
| 1.3.6.1.4.1.2000.2.11.1.7 | ColumnvsAtmLabelRangeMaxMulticast | read-write | current | Indicates the maximum number of multicast connections that can be created within this range. |
| 1.3.6.1.4.1.2000.2.11.1.8 | ColumnvsAtmLabelRangeRowStatus | read-write | current | Indicates the maximum number of multicast connections that can be created within this range. |
| 1.3.6.1.4.1.2000.2.12 | TablevsFrLabelRangeTable | not-accessible | current | Table giving the configured label range information for the various frame relay ports. |
| 1.3.6.1.4.1.2000.2.12.1 | RowvsFrLabelRangeEntry | not-accessible | current | This table gives the per port label ranges |
| 1.3.6.1.4.1.2000.2.12.1.1 | ColumnvsFrLabelRangeIndex | read-write | current | Index into this table. |
| 1.3.6.1.4.1.2000.2.12.1.2 | ColumnvsFrLabelRangeMinDLCI | read-write | current | Lower bound of the DLCI range for this Frame Relay interface. |
| 1.3.6.1.4.1.2000.2.12.1.3 | ColumnvsFrLabelRangeMaxDLCI | read-write | current | Upper bound of the DLCI range for this Frame Relay interface. |
| 1.3.6.1.4.1.2000.2.12.1.4 | ColumnvsFrLabelRangeRowStatus | read-write | current | Used to create and delete this row. |
| 1.3.6.1.4.1.2000.2.14 | TablevsMplsLabelRangeTable | not-accessible | current | Table giving the configured label range information for MPLS ports. |
| 1.3.6.1.4.1.2000.2.14.1 | RowvsMplsLabelRangeEntry | not-accessible | current | This table gives the per port MPLS ranges. |
| 1.3.6.1.4.1.2000.2.14.1.1 | ColumnvsMplsLabelRangeIndex | read-write | current | Index into this table. |
| 1.3.6.1.4.1.2000.2.14.1.2 | ColumnvsMplsLabelRangeMinID | read-write | current | Lower bound of the MPLS label range. |
| 1.3.6.1.4.1.2000.2.14.1.3 | ColumnvsMplsLabelRangeMaxID | read-write | current | Upper bound of the MPLS label range. |
| 1.3.6.1.4.1.2000.2.14.1.4 | ColumnvsMplsLabelRangeRowStatus | read-write | current | Used to create or delete this row. |
| 1.3.6.1.4.1.2000.2.15 | TablevsIpLabelRangeTable | not-accessible | current | Table giving the configured IP ranges for IP ports. |
| 1.3.6.1.4.1.2000.2.15.1 | RowvsIpLabelRangeEntry | not-accessible | current | This table gives the per port IP ranges. |
| 1.3.6.1.4.1.2000.2.15.1.1 | ColumnvsIpLabelRangeIndex | read-write | current | Index into this table. |
| 1.3.6.1.4.1.2000.2.15.1.2 | ColumnvsIpLabelRangeIP | read-write | current | Indicates the IP address for a particular network. |
| 1.3.6.1.4.1.2000.2.15.1.3 | ColumnvsIpLabelRangeIPMask | read-write | current | Indicates the subnet's mask address. |
| 1.3.6.1.4.1.2000.2.15.1.4 | ColumnvsIpLabelRangeRowStatus | read-write | current | Used for creating and deleting this row. |
| 1.3.6.1.4.1.2000.2.17 | TablevSwitchCrossVSTable | not-accessible | current | This table manages the virtual connection configured between two VSs |
| 1.3.6.1.4.1.2000.2.17.1 | RowvSwitchCrossVSEntry | not-accessible | current | Configuration for each virtual connection in the switch |
| 1.3.6.1.4.1.2000.2.17.1.1 | ColumnvSwitchVConnectID | read-write | current | Identifies this virtual connection |
| 1.3.6.1.4.1.2000.2.17.1.2 | ColumnvSwitchVConnect1VSID | read-write | current | This is the virtual switch ID of the first virtual switch attached to this synthetic connection. |
| 1.3.6.1.4.1.2000.2.17.1.3 | ColumnvSwitchVConnect1PortID | read-write | current | This is the virtual port id associated with this synthetic connection in virtual switch vSwitchVConnect1VSID. |
| 1.3.6.1.4.1.2000.2.17.1.4 | ColumnvSwitchVConnect2VSID | read-write | current | This is the virtual switch ID of the second virtual switch attached to this synthetic connection. |
| 1.3.6.1.4.1.2000.2.17.1.5 | ColumnvSwitchVConnect2PortID | read-write | current | This is the virtual port id associated with this synthetic connection in virtual switch vSwitchVConnect2VSID. |
| 1.3.6.1.4.1.2000.2.17.1.6 | ColumnvSwitchVLinkType | read-write | current | Specifies the layer-2 link type that the virtual ports associated with this synthetic connection will appear to be. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| OwnerString | OCTET STRING (SIZE(0..255)) | current | This data type is used to model an administratively assigned name of the owner of a resource. It is suggested that this name contain one or more of the following: manager station's transport address, management station … |
| PortDirection | INTEGER { incoming(1), outgoing(2) } | current | The following type is used to specify the direction of the label ranges and the bandwidth in the physical port of the switch as well as the virtual port of the virtual switch. |
| RatioString | OCTET STRING (SIZE(3)) | current | This data type is used to model a floating number, specifically here the cell loss ratio and a probability number. It is required to be of the form m:n, where m and n are both integers and represent a floating number m … |
| VectorString | OCTET STRING (SIZE(3..8)) | current | This data type is used to model a 2-dimentional number (x,y). Here it is used to specify the vpi/vci range for an ATM interface. 2 vectors, (minVpi, minVci) and (maxVpi, maxVci), make up a label range. It is required to… |