PowerNet-Discovery-MIB
69 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | -- Exp End OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises Gauge IpAddress TimeTicks |
| SNMPv2-SMI | -- Exp Begin Integer32 Counter32 Gauge32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.3.2 | NodeapcDiscovery | |||
| 1.3.6.1.3.2.1 | ScalarapcDiscoveryInfoTableSize | read-only | mandatory | The number of APC devices discovered at this IP address. |
| 1.3.6.1.3.2.2 | TableapcDiscoveryInfoTable | not-accessible | mandatory | Allows for access to discovered device(s) at this IP. The number of entries is contained in the apcDiscoveryInfoTableSize OID. |
| 1.3.6.1.3.2.2.1 | RowapcDiscoveryInfoEntry | not-accessible | mandatory | The discovered device to query. |
| 1.3.6.1.3.2.2.1.1 | ColumnapcDiscoveryInfoTableIndex | read-only | mandatory | The index to the discovered device table entry. |
| 1.3.6.1.3.2.2.1.2 | ColumnapcDiscoveryModel | read-only | mandatory | The APC device generic model identifier. |
| 1.3.6.1.3.2.2.1.3 | ColumnapcDiscoverySerialNumber | read-only | mandatory | Serial Number of the discovered device or sub-device. |
| 1.3.6.1.3.2.2.1.4 | ColumnapcDiscoveryStatus | read-only | mandatory | The status of the APC device. unknown(1) indicates the state is unknown. deviceNormal(2) indicates the device is functioning normally. deviceWarning(3) indicat… |
| 1.3.6.1.3.2.2.1.5 | ColumnapcDiscoveryLabelString | read-only | mandatory | The label of the device to be presented in the ISX Manager discovery interface. |
| 1.3.6.1.3.2.2.1.6 | ColumnapcDiscoveryDeviceHierarchy | read-only | mandatory | The relative position of the device: Primary (1) the main device (e.g. a UPS) Secondary (2) an additional device (e.g. Integrated Environmental Monitor) Subord… |
| 1.3.6.1.3.2.2.1.7 | ColumnapcDiscoveryDeviceLocation | read-write | mandatory | The user-defined location of the device. |
| 1.3.6.1.3.2.2.1.8 | ColumnapcDiscoveryDeviceLocationMaxLength | read-only | mandatory | The maximum length of the user-defined location of the device. |
| 1.3.6.1.3.2.2.1.9 | ColumnapcDiscoveryDeviceName | read-write | mandatory | The user-defined name of the device. |
| 1.3.6.1.3.2.2.1.10 | ColumnapcDiscoveryDeviceNameMaxLength | read-only | mandatory | The maximum length of the user-defined name of the device. |
| 1.3.6.1.3.2.2.1.11 | ColumnapcDiscoveryDeviceInstance | read-only | mandatory | Unique instance identifier used to distinguish between devices of the same apcDiscoveryModel. |
| 1.3.6.1.3.2.2.1.12 | ColumnapcDiscoveryDeviceParamsIndex | read-only | mandatory | Table reference/index used to access device parameter values. |
| 1.3.6.1.3.2.2.1.13 | ColumnapcDiscoveryDdfXReference | read-only | mandatory | Cross reference identifier used to locate the DDF file specified in the apcDiscoveryDeviceDefTable table that is appropriate for this device. |
| 1.3.6.1.3.2.2.1.14 | ColumnapcDiscoveryDeviceStatusBlockId | read-only | mandatory | The ID of the status block to display for this device. |
| 1.3.6.1.3.2.3 | ScalarapcDiscoveryDeviceFirmwareTableSize | read-only | mandatory | The number of firmware elements hosted at this APC device. |
| 1.3.6.1.3.2.4 | TableapcDiscoveryDeviceFirmwareTable | not-accessible | mandatory | Allows for access to firmware elements on this device. The number of entries is contained in the apcDiscoveryDeviceFirmwareTableSize OID. |
| 1.3.6.1.3.2.4.1 | RowapcDiscoveryDeviceFirmwareEntry | not-accessible | mandatory | The firmware element to query. |
| 1.3.6.1.3.2.4.1.1 | ColumnapcDiscoveryDeviceFirmwareTableIndex | read-only | mandatory | The index to the discovered device table entry. |
| 1.3.6.1.3.2.4.1.2 | ColumnapcDiscoveryDeviceSerialNumber | read-only | mandatory | Serial Number of the device that has this firmware. |
| 1.3.6.1.3.2.4.1.3 | ColumnapcDiscoveryFirmwareName | read-only | mandatory | Firmware name for this firmware. |
| 1.3.6.1.3.2.4.1.4 | ColumnapcDiscoveryFirmwareRevision | read-only | mandatory | Revision of the firmware. |
| 1.3.6.1.3.2.5 | ScalarapcDiscoveryDeviceProtocolTableSize | read-only | mandatory | The number of protocols supported by this device. |
| 1.3.6.1.3.2.6 | TableapcDiscoveryDeviceProtocolTable | not-accessible | mandatory | Allows for access to protocol entries on this device. Each entry represents a protocol that the device supports. The number of entries is contained in the apcD… |
| 1.3.6.1.3.2.6.1 | RowapcDiscoveryDeviceProtocolEntry | not-accessible | mandatory | The protocol element to query. |
| 1.3.6.1.3.2.6.1.1 | ColumnapcDiscoveryDeviceProtocolTableIndex | read-only | mandatory | The index to the protocol table entry. |
| 1.3.6.1.3.2.6.1.2 | ColumnapcDiscoveryProtocolNumber | read-only | mandatory | Protocol Number. 1-SNMP 2-Telnet 3-HTTP 4-DCAL 5-SDCAL (Secure DCAL) 6-SSL 7-SSH 8-SCP 9-NTP 10-SMTP 11-FTP Server 12-TFTP Client 13-BOOTP 14-DHCP 15-RADIUS 16… |
| 1.3.6.1.3.2.6.1.3 | ColumnapcDiscoveryProtocolVersion | read-only | mandatory | The version of the protocol. |
| 1.3.6.1.3.2.6.1.4 | ColumnapcDiscoveryProtocolPort | read-only | mandatory | Encoded port on which this protocol is being used. |
| 1.3.6.1.3.2.6.1.5 | ColumnapcDiscoveryProtocolEnabledDisabled | read-only | mandatory | The enabled/disabled state of the protocol within this device . disabled(1) indicates the protocol is supported, but mandatoryly disabled. enabled(2) indicates… |
| 1.3.6.1.3.2.7 | ScalarapcDiscoveryDeviceDefTableSize | read-only | mandatory | The number of DDF files available at this IP address. |
| 1.3.6.1.3.2.8 | TableapcDiscoveryDeviceDefTable | not-accessible | mandatory | Allows for access to the device definition information for the discovered device(s) at this IP. The number of entries is contained in the apcDiscoveryDeviceDef… |
| 1.3.6.1.3.2.8.1 | RowapcDiscoveryDeviceDefEntry | not-accessible | mandatory | The device description element for the device. |
| 1.3.6.1.3.2.8.1.1 | ColumnapcDiscoveryDeviceDefTableIndex | read-only | mandatory | The index to the device definition table entry. |
| 1.3.6.1.3.2.8.1.2 | ColumnapcDiscoveryDeviceDefDeviceClass | read-only | mandatory | String specifying the device class. Class, Type, Family is used to identify the device described by this DDF file. |
| 1.3.6.1.3.2.8.1.3 | ColumnapcDiscoveryDeviceDefDeviceType | read-only | mandatory | String specifying the device type. Class, Type, Family is used to identify the device described by this DDF file. |
| 1.3.6.1.3.2.8.1.4 | ColumnapcDiscoveryDeviceDefDeviceFamily | read-only | mandatory | String specifying the device family. Class, Type, and Family are used to identify the device described by this DDF file. |
| 1.3.6.1.3.2.8.1.5 | ColumnapcDiscoveryDeviceDefDeviceVersion | read-only | mandatory | A string value specifying the version of the DDF element to be used for this device. |
| 1.3.6.1.3.2.8.1.6 | ColumnapcDiscoveryDeviceDefDdfXReference | read-only | mandatory | Cross reference identifier used to locate the DDF file from the apcDiscoveryInfoTable table. |
| 1.3.6.1.3.2.9 | ScalarapcDiscoveryDeviceAlarmStateChangeCount | read-only | mandatory | The number of changes to the alarm state table. This number starts at zero and increases by one for each change to the table. |
| 1.3.6.1.3.2.10 | ScalarapcDiscoveryDeviceAlarmStateTableSize | read-only | mandatory | The number of elements in the alarm state table. |
| 1.3.6.1.3.2.11 | TableapcDiscoveryDeviceAlarmStateTable | not-accessible | mandatory | Allows for access to alarm states reported by the devices at this IP address. |
| 1.3.6.1.3.2.11.1 | RowapcDiscoveryDeviceAlarmStateEntry | not-accessible | mandatory | The condition entry. |
| 1.3.6.1.3.2.11.1.1 | ColumnapcDiscoveryDeviceAlarmStateTableIndex | read-only | mandatory | The index to the alarm state table entry. |
| 1.3.6.1.3.2.11.1.2 | ColumnapcDiscoveryDeviceAlarmStateSerialNumber | read-only | mandatory | Serial Number of the device that has the alarm state. |
| 1.3.6.1.3.2.11.1.3 | ColumnapcDiscoveryDeviceAlarmStateCode | read-only | mandatory | Encoded data string representing mandatory device alarm state. The format of the 12-byte (012345678901) string is as follows: bytes 0-1 : 16-bit alarm code (by… |
| 1.3.6.1.3.2.11.1.4 | ColumnapcDiscoveryDeviceAlarmStateParam | read-only | mandatory | Optional parameter or parameters associated with this alarm state. Parameters are encoded as a sequence of varbinds corresponding to values in the MIB. |
| 1.3.6.1.3.2.12 | ScalarapcDiscoveryDeviceInfoChangeCount | read-only | mandatory | The number of changes to the device info table. When a device is added or removed this count is incremented. |
| 1.3.6.1.3.4 | NodeapcTrapReceiver | |||
| 1.3.6.1.3.4.1 | ScalarapcTrapRecvTableSize | read-only | mandatory | The number of trap receivers in apcTrapRecvTable. |
| 1.3.6.1.3.4.2 | TableapcTrapRecvTable | not-accessible | mandatory | Table of trap receivers. |
| 1.3.6.1.3.4.2.1 | RowapcTrapRecvEntry | not-accessible | mandatory | Trap receiver table. |
| 1.3.6.1.3.4.2.1.1 | ColumnapcTrapRecvIndex | read-only | mandatory | Trap receiver index. |
| 1.3.6.1.3.4.2.1.2 | ColumnapcTrapRecvHost | read-only | mandatory | The host name of the manager. |
| 1.3.6.1.3.4.2.1.3 | ColumnapcTrapRecvType | read-only | mandatory | The type of manager. |
| 1.3.6.1.3.4.2.1.4 | ColumnapcTrapRecvUniqueId | read-only | mandatory | Unique ID obtained from getting the apcTrapReceiverUniqueID OID. |
| 1.3.6.1.3.4.3 | ScalarapcTrapRecvTableModify | read-write | mandatory | Allows the manager to modify the list of trap receivers... 'hostname, Value[, UniqueID]' |
| 1.3.6.1.3.4.4 | ScalarapcTrapReceiverUniqueID | read-only | mandatory | This OID returns a unique ID to be used to register for Traps. |
| 1.3.6.1.4.1.318 | Nodeapc | |||
| 1.3.6.1.4.1.318.1 | Nodeproducts | |||
| 1.3.6.1.4.1.318.1.1 | Nodehardware | |||
| 1.3.6.1.4.1.318.1.2 | Nodesoftware | |||
| 1.3.6.1.4.1.318.1.3 | Nodesystem | |||
| 1.3.6.1.4.1.318.1.4 | Nodeexperimental | |||
| 1.3.6.1.4.1.318.2 | Nodeapcmgmt | |||
| 1.3.6.1.4.1.318.1000 | NodeapcDiscoveryAlarmStateTableUpdate | INTERNAL: A Discovery Alarm State Table Update trap is sent when any data alarm state is added, removed, or its parameters are changed in the condition table. … |