QMS-MIB
404 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress NetworkAddress |
| RFC1158-MIB | snmp |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.11.0 | NodecoldStart | A coldStart trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementation … | ||
| 1.3.6.1.2.1.11.4 | NodeauthenticationFailure | An authenticationFailure trap signifies that the sending protocol entity is the addressee of a protocol message that is not properly authenticated. While imple… | ||
| 1.3.6.1.4.1.480 | NodeqmsInc | |||
| 1.3.6.1.4.1.480.1 | NodeqmsPtrErrorMsg | The variable used to relay the current printer error or informaitional message. | ||
| 1.3.6.1.4.1.480.1 | NodeqmsUIH | |||
| 1.3.6.1.4.1.480.1.1 | NodeqmsSystem | |||
| 1.3.6.1.4.1.480.1.1.1001 | ScalarqmsSYSPageCount | read-only | mandatory | Value used to indicate the current number of pages printed to date. |
| 1.3.6.1.4.1.480.1.1.1002 | ScalarqmsSYSSheetCount | read-only | mandatory | Flag used to indicate the current number of sheets printed to date. |
| 1.3.6.1.4.1.480.1.1.1003 | ScalarqmsSYSPrinterModel | read-only | mandatory | Printer model name string. |
| 1.3.6.1.4.1.480.1.1.1004 | ScalarqmsSYSPrinterVersion | read-only | mandatory | Value used to hold the current version of the printer software. |
| 1.3.6.1.4.1.480.1.1.1005 | ScalarqmsSYSPrinterName | read-write | mandatory | Value used to hold the current printer name. |
| 1.3.6.1.4.1.480.1.1.1006 | ScalarqmsSYSA3PageCount | read-only | mandatory | Value used to indicate the current number of A3 pages/faces printed to date. |
| 1.3.6.1.4.1.480.1.1.1007 | ScalarqmsSYSA3SheetCount | read-only | mandatory | Value used to indicate the current number of A3 sheets printed to date. |
| 1.3.6.1.4.1.480.1.1.1008 | ScalarqmsSYSFPA | read-only | mandatory | Is FPA chip set installed in the system. |
| 1.3.6.1.4.1.480.1.1.1009 | ScalarqmsSYSSystemImage | read-only | mandatory | What type of boot system is running. |
| 1.3.6.1.4.1.480.1.1.1010 | ScalarqmsSYSDiskSwap | read-only | mandatory | Flag used to indicate the current state of disk swapping. |
| 1.3.6.1.4.1.480.1.1.1011 | ScalarqmsSYSMultiRes | read-only | mandatory | Multi-Res is a mechanism which provides either a printing resolution higher than the print engine's native resolution or edge-smoothing at the native resolutio… |
| 1.3.6.1.4.1.480.1.5 | NodeqmsMemory | |||
| 1.3.6.1.4.1.480.1.5.1 | ScalarqmsMEMPhysical | read-only | mandatory | Size of the physical memory in MB. |
| 1.3.6.1.4.1.480.1.5.2 | ScalarqmsMEMTotal | read-only | mandatory | Size of the total virtual memory in MB. Note: If no hard disk is installed, this will be the size of physical memory. |
| 1.3.6.1.4.1.480.1.5.3 | ScalarqmsClientSystem | read-only | mandatory | Also known as System Use, this non-configurable client is the amount of RAM used to run the printer's operating system. It's never increased or decreased. The … |
| 1.3.6.1.4.1.480.1.5.4 | ScalarqmsClientSpool | read-only | mandatory | Also known as Host Input and K Mem for Spool, this memory client stores incoming data from all the interfaces until the emulation can process the print job. Wh… |
| 1.3.6.1.4.1.480.1.5.5 | ScalarqmsClientEmulation | read-only | mandatory | Also known as K Mem Emulation, this client is used to store any optional or loadable emulations, such as LN03 Plus or QUIC II. Increasing this client's memory … |
| 1.3.6.1.4.1.480.1.5.6 | ScalarqmsClientHeap | read-only | mandatory | Also known as K Mem PSHeap, Heap, PostScript VM, and Virtual Memory, this client holds downloaded fonts, PostScript operators, and forms. Inefficiently coded P… |
| 1.3.6.1.4.1.480.1.5.7 | ScalarqmsClientFontCache | read-only | mandatory | Also known as K Mem PS Fonts and Font Cache, this memory client stores bitmapped representations of previously scaled PostScript fonts. This process reduces th… |
| 1.3.6.1.4.1.480.1.5.8 | ScalarqmsClientDisplayList | read-only | mandatory | Also known as K Mem Display, this client stores compressed repre- sentations, or blocks, of the pages to be printed. It takes approxi- mately one compressed bl… |
| 1.3.6.1.4.1.480.1.5.9 | ScalarqmsClientFrameBuffer | read-only | mandatory | The Frame Buffer memory client holds rasterized or bitmapped images of page faces which are ready to be sent to the print engine. A frame holds the contents of… |
| 1.3.6.1.4.1.480.1.5.10 | ScalarqmsClientEmulTemp | read-only | mandatory | Also known as K Mem Emul Tmp and Emulation Temporary, this cli- ent sets the amount of system memory to be used by non-PostScript emulations for storing downlo… |
| 1.3.6.1.4.1.480.1.5.11 | ScalarqmsClientDisk | read-only | mandatory | This memory client stores frequently used data in system memory instead of continually storing and retrieving it from a hard disk. If a hard disk is used and a… |
| 1.3.6.1.4.1.480.1.5.13 | ScalarqmsClientColorMatching | read-only | mandatory | The Color Matching memory client provides storage space for the control and operation of the Color Matching feature. The available space is used to process the… |
| 1.3.6.1.4.1.480.1.5.14 | ScalarqmsClientHPStoragePool | read-only | mandatory | Also known as K Mem HP Pool, HP Heap, HP VM, and Virtual Memory, this client holds downloaded fonts, and forms. Inefficiently coded PCL and XL jobs can consume… |
| 1.3.6.1.4.1.480.1.101 | NodeqmsIoCtl | |||
| 1.3.6.1.4.1.480.1.101.7 | ScalarqmsFEEspEmul | read-write | mandatory | The ESP Default Emulation sets the ESP default emulation used when ESP is unable to identify the language of a print job. This allows the system administrator … |
| 1.3.6.1.4.1.480.1.101.17 | ScalarqmsFECopies | read-write | mandatory | While it is preferable to use your application to select the number of copies to print, you can change the default number of copies for all print jobs through … |
| 1.3.6.1.4.1.480.1.102 | NodeqmsHTTP | |||
| 1.3.6.1.4.1.480.1.102.1 | ScalarqmsHTTPContact | read-write | mandatory | Text string that contains the contact person for the printer. |
| 1.3.6.1.4.1.480.1.102.2 | ScalarqmsHTTPHelpURL | read-write | mandatory | Text string for the URL of the online help page. |
| 1.3.6.1.4.1.480.1.102.3 | ScalarqmsHTTPContactNumber | read-write | mandatory | Text string of the phone number of the contact person. |
| 1.3.6.1.4.1.480.1.102.4 | ScalarqmsHTTPCorpURL | read-write | mandatory | Text string for URL of the Minolta-QMS Corporate home page. |
| 1.3.6.1.4.1.480.1.102.5 | ScalarqmsHTTPSuppliesNumber | read-write | mandatory | Text string for phone number of the Supplies and Accessories contact. |
| 1.3.6.1.4.1.480.1.103 | NodeqmsIoTimeOuts | |||
| 1.3.6.1.4.1.480.1.103.1 | ScalarqmsFETmPSWait | read-write | mandatory | The PostScript emulation timeout is the maximum number of seconds the PostScript emulation waits for incoming data. Choices 0-99999 Default 30 (30 sec.) Notes … |
| 1.3.6.1.4.1.480.1.103.2 | ScalarqmsFETmJob | read-write | mandatory | The print job timeout is the maximum number of seconds the printer processes a print job before it ends the job. Choices 0-99999 Default 0 (infinity, no timeou… |
| 1.3.6.1.4.1.480.1.103.3 | ScalarqmsFETmNonPSEmul | read-write | mandatory | The emulation timeout is the maximum number of seconds emula- tions other than PostScript (such as HP-GL, HP PCL5e, and Line- printer) wait for incoming data. … |
| 1.3.6.1.4.1.480.1.103.4 | ScalarqmsFETmEsp | read-write | mandatory | The ESP timeout is the maximum number of seconds the printer waits to match an emulation before printing the job in the default emulation. Choices 0-99999 Defa… |
| 1.3.6.1.4.1.480.1.104 | NodeqmsIoPages | |||
| 1.3.6.1.4.1.480.1.104.5 | ScalarqmsFEDoStartPage | read-write | mandatory | By default, the printer prints a start-up page when you turn it on. The start-up page lists basic information about the printer, such as its name, the PostScri… |
| 1.3.6.1.4.1.480.1.104.8 | ScalarqmsFEHeaderPage | read-write | mandatory | A header page is a separator page that prints before a print job to help users sort their jobs. The information on the header page can be customized. See the D… |
| 1.3.6.1.4.1.480.1.104.9 | ScalarqmsFEHeaderInputbin | read-write | mandatory | You can select the input bin (tray or cassette) from which the printer pulls media when printing the header page. Choices Printer specific; see your printer do… |
| 1.3.6.1.4.1.480.1.104.10 | ScalarqmsFETrailerPage | read-write | mandatory | A trailer page is a separator page that prints after a print job to help users sort out their jobs and, if requested, identify print job errors. Choices Off: D… |
| 1.3.6.1.4.1.480.1.104.11 | ScalarqmsFETrailerInputbin | read-write | mandatory | You can select the input bin (tray or cassette) from which the printer pulls media when printing the trailer page. Choices Printer specific; see your printer d… |
| 1.3.6.1.4.1.480.1.104.12 | ScalarqmsFEDoSysStart | read-write | mandatory | If you have a hard disk and Do Sys Start is enabled, when the printer is turned on, the controller checks the hard disk for a PostScript file named SYS\START a… |
| 1.3.6.1.4.1.480.1.104.15 | ScalarqmsFEStatusPageType | read-write | mandatory | Status pages list printer hardware and software information. Two types of status pages are available. Choices Standard: Lists printer identification informatio… |
| 1.3.6.1.4.1.480.1.160 | NodeqmsSerial | |||
| 1.3.6.1.4.1.480.1.160.100 | ScalarqmsSerPSProtocol | read-write | mandatory | Sets the binary communications protocol (BCP) for communicating over a serial interface to a PostScript printer. Choices Normal: Enables standard, ASCII (7-bit… |
| 1.3.6.1.4.1.480.1.160.101 | ScalarqmsSerMode | read-write | mandatory | Enables or disables the serial port. Choices Interactive: Establish two-way communication between the host and the printer. Noninteractive: Establish one-way c… |
| 1.3.6.1.4.1.480.1.160.102 | ScalarqmsSerEmulation | read-write | mandatory | Sets the serial interface emulation. Choices PostScript, HPGL, HPPCL, HEXDUMP, LN03, QUIC2 CCITT, Line Printer, TIFF, CALS, CGM, ESP Default ESP Note: Only the… |
| 1.3.6.1.4.1.480.1.160.103 | ScalarqmsSerPriority | read-write | mandatory | Allows you to specify which jobs are printed first, according to the interface through which they are received, when jobs are received simultaneously. For exam… |
| 1.3.6.1.4.1.480.1.160.104 | ScalarqmsSerBufferSize | read-only | mandatory | Sets the minimum number of kilobytes of system memory allocated to the serial interface. Default 15 Notes This value must be less than K Mem For Spool. A 0 val… |
| 1.3.6.1.4.1.480.1.160.111 | ScalarqmsSerEndDocumentMode | read-write | mandatory | Enables (and identifies an end-of-job sequence) or disables data stream sensing for the end-of-document (EOD) command. Choices None-The printer recognizes only… |
| 1.3.6.1.4.1.480.1.160.112 | ScalarqmsSerSpoolTimeout | read-write | mandatory | Sets the number of seconds the interface waits for data from the host before terminating a spooled print job. Choices 0-99999 Default 30 |
| 1.3.6.1.4.1.480.1.160.201 | ScalarqmsSerBaudRate | read-write | mandatory | Sets the rate data is transmitted (bits per second) over the serial interface. Choices 300, 600, 1200, 2400, 4800, 9600, 19200, 38400 Default 9600 Notes Baud r… |
| 1.3.6.1.4.1.480.1.160.202 | ScalarqmsSerParity | read-write | mandatory | Sets the check bit used to identify data transmission errors. Choices: None, Odd, Even Default: None Note: The printer's parity setting must match that of the … |
| 1.3.6.1.4.1.480.1.160.203 | ScalarqmsSerIgnoreParity | read-write | mandatory | Specifies how the printer should handle parity errors. Choices Off: Ignore parity errors. The printer prints its best interpretation of the character(s) affect… |
| 1.3.6.1.4.1.480.1.160.204 | ScalarqmsSerRxSWFlow | read-write | mandatory | Sets the software communication protocol used by the printer to control communication from the host computer. Choices ETX/ACK, Robust XON/XOFF, None, XON/XOFF … |
| 1.3.6.1.4.1.480.1.160.205 | ScalarqmsSerTxSWFlow | read-write | mandatory | Sets the software communication protocol used by the host computer to control communication with the printer. Choices ETX/ACK, None, XON/XOFF Default None |
| 1.3.6.1.4.1.480.1.160.206 | ScalarqmsSerDataBits | read-write | mandatory | Sets the number of data bits transmitted per character. Choices 5 Bits, 6 Bits, 7 Bits, 8 Bits Default 8 Bits |
| 1.3.6.1.4.1.480.1.160.207 | ScalarqmsSerStopBits | read-write | mandatory | Sets the number of stop bits transmitted per character. Choices 1 Bit, 2 Bits, 1 1/2 Bits Default One Bit |
| 1.3.6.1.4.1.480.1.160.208 | ScalarqmsSerHwCTS | read-write | mandatory | Controls the flow of data between the printer and the host. Choices Off, On Default Off Notes If the host uses hardware flow control, set this option to match … |
| 1.3.6.1.4.1.480.1.160.209 | ScalarqmsSerHwRTS | read-write | mandatory | Controls the flow of data between the printer and the host. Choices Off, On Default Off Notes If the host uses hardware flow control, set this option to match … |
| 1.3.6.1.4.1.480.1.160.210 | ScalarqmsSerHwDTR | read-write | mandatory | Controls the flow of data between the printer and the host. Choices Off, On Default On Notes If the host uses hardware flow control, set this option to match t… |
| 1.3.6.1.4.1.480.1.160.211 | ScalarqmsSerHwDTRPOL | read-write | mandatory | Controls the flow of data between the printer and the host. Choices Reverse, Normal Default Normal Notes If the host uses hardware flow control, set this optio… |
| 1.3.6.1.4.1.480.1.160.212 | ScalarqmsSerHwDSR | read-write | mandatory | Controls the flow of data between the printer and the host. Choices Off, On Default Off Notes If the host uses hardware flow control, set this option to match … |
| 1.3.6.1.4.1.480.1.160.213 | ScalarqmsSerHwDSRPOL | read-write | mandatory | Controls the flow of data between the printer and the host. Choices Reverse, Normal Default Normal Notes If the host uses hardware flow control, set this optio… |
| 1.3.6.1.4.1.480.1.161 | NodeqmsParallel | |||
| 1.3.6.1.4.1.480.1.161.100 | ScalarqmsParPSProtocol | read-write | mandatory | Sets the binary communications protocol (BCP) for communicating over a parallel interface to a PostScript printer. Choices Normal: Enables standard, ASCII (7-b… |
| 1.3.6.1.4.1.480.1.161.101 | ScalarqmsParMode | read-write | mandatory | The parallel interface supports Centronics parallel communication as well as IEEE 1284 bidirectional parallel communication. Choices Interactive-Establish two-… |
| 1.3.6.1.4.1.480.1.161.102 | ScalarqmsParEmulation | read-write | mandatory | Sets the parallel interface emulation. Choices PostScript, HPGL, HPPCL, HEXDUMP, LN03, QUIC2 CCITT, Line Printer, TIFF, CALS, CGM, ESP Default ESP Note: Only t… |
| 1.3.6.1.4.1.480.1.161.103 | ScalarqmsParPriority | read-write | mandatory | Allows you to specify which jobs are printed first, according to the interface through which they are received, when jobs are received simultaneously. Choices … |
| 1.3.6.1.4.1.480.1.161.104 | ScalarqmsParBufferSize | read-only | mandatory | Sets the minimum number of kilobytes of system memory allocated to the parallel interface. Default 15 Notes This value must be less than K Mem for Spool in the… |
| 1.3.6.1.4.1.480.1.161.111 | ScalarqmsParSpoolTimeout | read-write | mandatory | Sets the number of seconds the interface waits for data from the host before terminating a spooled print job. Choices 0-99999 Default 30 |
| 1.3.6.1.4.1.480.1.161.112 | ScalarqmsParEndDocumentMode | read-write | mandatory | Enables (and identifies an end-of-job sequence) or disables data stream sensing for the end-of-document (EOD) command. Choices None: The printer recognizes onl… |
| 1.3.6.1.4.1.480.1.161.113 | ScalarqmsParDataBits | read-write | mandatory | Sets the number of data bits transmitted per character. Choices 7 Bits, 8 Bits Default 8 Bits |
| 1.3.6.1.4.1.480.1.304 | NodeqmsEngine | |||
| 1.3.6.1.4.1.480.1.304.1 | ScalarqmsENGTopOffset | read-write | mandatory | This option allows you to adjust the vertical placement of printed images. To check image alignment, print a standard status page (Print Status key). When the … |
| 1.3.6.1.4.1.480.1.304.2 | ScalarqmsENGLeftOffset | read-write | mandatory | This option allows you to adjust the horizontal placement of printed images. To check image alignment, print a standard status page (Print Status key). When th… |
| 1.3.6.1.4.1.480.1.304.4 | ScalarqmsENGTopOffsetDuplex | read-write | mandatory | This option allows you to adjust the duplex vertical placement of printed images. To check image alignment, print a standard status page (Print Status key). Wh… |
| 1.3.6.1.4.1.480.1.304.6 | ScalarqmsENGLeftOffsetDuplex | read-write | mandatory | This option allows you to adjust the duplex horizontal placement of printed images. To check image alignment, print a standard status page (Print Status key). … |
| 1.3.6.1.4.1.480.1.304.8 | ScalarqmsENGResolution | read-write | mandatory | This option sets the print engine's default resolution. Choices 300 dpi-300x300 dpi resolution 600 dpi-600x600 dpi resolution 1200 dpi-1200x1200 dpi resolution… |
| 1.3.6.1.4.1.480.1.304.11 | ScalarqmsENGDefaultPaper | read-write | mandatory | Default Paper is used when the default media is requested but the default input bin is missing from the engine. There's no way to sense the media size automati… |
| 1.3.6.1.4.1.480.1.304.12 | ScalarqmsENGDuplex | read-write | mandatory | Current duplexing setting on printers for which the feature is supported. Choices Off: Prints simplex pages. Long Edge: Duplexes each page of each job so they … |
| 1.3.6.1.4.1.480.1.304.14 | ScalarqmsENGOrientation | read-write | mandatory | While you can usually specify the orientation of a print job in your application, if you consistently use a certain media orientation, you can set this option.… |
| 1.3.6.1.4.1.480.1.304.15 | ScalarqmsENGInputbin | read-write | mandatory | Default inputbin number. |
| 1.3.6.1.4.1.480.1.304.16 | ScalarqmsENGOutputbin | read-write | mandatory | Default outputbin number. |
| 1.3.6.1.4.1.480.1.304.17 | ScalarqmsENGCollation | read-write | mandatory | Collation is one of your printer's features. It is the printing of sets of multiple copies of a document in numeric order. Your printer is capa- ble of deliver… |
| 1.3.6.1.4.1.480.1.304.19 | ScalarqmsENGErrorRecovery | read-write | mandatory | When a media jam or other similar error occurs, the printer can reprint the job starting from the page on which the jam occurred. Choices On: Reprints a print … |
| 1.3.6.1.4.1.480.1.304.20 | ScalarqmsENGManualTrayMedia | read-write | mandatory | Need description and values. |
| 1.3.6.1.4.1.480.1.304.21 | ScalarqmsENGToneroutAction | read-write | mandatory | You can configure the printer to stop or to continue printing when a TONER LOW ACT. error message is displayed in the message window. Choices Continue: Continu… |
| 1.3.6.1.4.1.480.1.304.23 | ScalarqmsENGLetterheadMode | read-write | mandatory | This option appears only if the duplexing unit is installed on the printer. The letterhead option allows you to print both simplex and duplex jobs on letterhea… |
| 1.3.6.1.4.1.480.1.304.24 | ScalarqmsENGManualFeedTimeout | read-write | mandatory | This option allows you to set the amount of time the printer waits for paper to be inserted into the multipurpose tray before it cancels the job. Choices 0 - 3… |
| 1.3.6.1.4.1.480.1.304.26 | ScalarqmsENGOffsetStacking | read-write | mandatory | This option appears only if the printer is capable of offset stacking. Choices: Off - Stacking of each output set is aligned with the previous set. On - Stacki… |
| 1.3.6.1.4.1.480.1.304.27 | ScalarqmsENGEnergyStar | read-write | mandatory | The Energy Saver option specifies whether the printer changes to a low-power state (the engine remains on, but the fuser turns off) after the printer is inacti… |
| 1.3.6.1.4.1.480.1.304.40 | ScalarqmsENGPageOrder | read-write | mandatory | Need input on this....is this new? |
| 1.3.6.1.4.1.480.1.304.41 | ScalarqmsENGEnvelopeTrayMedia | read-write | mandatory | The envelope feeder can be adjusted to accept different envelope sizes. See chapter 7, of the Options manual, the 'Selecting Enve- lopes' section, for more inf… |
| 1.3.6.1.4.1.480.1.304.42 | ScalarqmsENGDensity | read-write | mandatory | The Toner Density option adjusts the density of the toner that is laid down on the paper. Note: See your Minolta-QMS documentation for printer specific values. |
| 1.3.6.1.4.1.480.1.304.43 | ScalarqmsENGColorModel | read-only | mandatory | Use this option to select between full-color and monochrome printing. Choices Gray, CMY, RGB, CMYK |
| 1.3.6.1.4.1.480.1.304.44 | ScalarqmsENGColorSeparation | read-only | mandatory | Use this option to turn color separation on or off. Choices On, Off Default Off |
| 1.3.6.1.4.1.480.1.304.45 | ScalarqmsENGUnderColor | read-only | mandatory | Need input on this....is this new? |
| 1.3.6.1.4.1.480.1.304.48 | ScalarqmsENGQuality | read-write | mandatory | The Print Quality option allows the printer to operate at a lower rate of toner consumption and extend the life of your toner cartridges. This option also allo… |
| 1.3.6.1.4.1.480.1.304.1000 | TableqmsENGConsumeNameMulti | not-accessible | mandatory | A table of the engine's consumable names. |
| 1.3.6.1.4.1.480.1.304.1000.1 | RowqmsENGConsumeName | read-only | mandatory | Consumable name for engine. |
| 1.3.6.1.4.1.480.1.304.1001 | TableqmsENGConsumeLevelMulti | not-accessible | mandatory | A table of the engine's consumable levels. |
| 1.3.6.1.4.1.480.1.304.1001.1 | RowqmsENGConsumeLevel | read-only | mandatory | Specific consumable level. |
| 1.3.6.1.4.1.480.1.304.1002 | TableqmsENGConsumeMaxMulti | not-accessible | mandatory | A table of the engine's consumable maximum levels. |
| 1.3.6.1.4.1.480.1.304.1002.1 | RowqmsENGConsumeMax | read-only | mandatory | Specific consumable maximum level. |
| 1.3.6.1.4.1.480.1.304.1003 | TableqmsENGConsumeUnitsMulti | not-accessible | mandatory | A table of the engine's consumable units. |
| 1.3.6.1.4.1.480.1.304.1003.1 | RowqmsENGConsumeUnits | read-only | mandatory | Specific consumable unit type. |
| 1.3.6.1.4.1.480.1.304.1004 | TableqmsENGConsumeTypeMulti | not-accessible | mandatory | A table of the engine's consumable types. |
| 1.3.6.1.4.1.480.1.304.1004.1 | RowqmsENGConsumeType | read-only | mandatory | Specific consumable type. |
| 1.3.6.1.4.1.480.1.304.1005 | TableqmsENGConsumeNote1Multi | not-accessible | mandatory | A table of the first note applicable to each of the engines consumable. |
| 1.3.6.1.4.1.480.1.304.1005.1 | RowqmsENGConsumeNote1 | read-only | mandatory | Specific consumable note e.g. the kind of paper in an input tray. |
| 1.3.6.1.4.1.480.1.304.1006 | TableqmsENGConsumeNote2Multi | not-accessible | mandatory | A table of the second note applicable to each of the engine's consumables. |
| 1.3.6.1.4.1.480.1.304.1006.1 | RowqmsENGConsumeNote2 | read-only | mandatory | Specific consumable note. |
| 1.3.6.1.4.1.480.1.304.1007 | TableqmsENGConsumeIndexMulti | not-accessible | mandatory | Index into OID table. |
| 1.3.6.1.4.1.480.1.304.1007.1 | RowqmsENGConsumeIndex | read-only | mandatory | Specific consumable index. |
| 1.3.6.1.4.1.480.1.304.1010 | ScalarqmsENGNumConsumables | read-only | mandatory | Number of engine-related consumables that exist within the system. |
| 1.3.6.1.4.1.480.1.304.1011 | ScalarqmsENGChainInputBins | read-write | mandatory | An option in the Operator Control menu allows you to 'chain' input- bins (tray and cassettes) so that when the first inputbin empties, the printer will automat… |
| 1.3.6.1.4.1.480.1.304.1012 | TableqmsENGChainOutputbinMulti | not-accessible | mandatory | A table of the engine's default input chaining setting. |
| 1.3.6.1.4.1.480.1.304.1012.1 | RowqmsENGChainOutputbin | read-write | mandatory | Flag used to indicate if output bin chaining should be active. |
| 1.3.6.1.4.1.480.1.304.1013 | TableqmsENGInputbinMediatypeMulti | not-accessible | mandatory | A table of the engine's default media type setting. |
| 1.3.6.1.4.1.480.1.304.1013.1 | RowqmsENGInputbinMediatype | read-only | mandatory | A table of the engine's default media type settings. |
| 1.3.6.1.4.1.480.1.304.1014 | TableqmsENGChainInputbinMulti | not-accessible | mandatory | A table of the engine's default input chaining setting. |
| 1.3.6.1.4.1.480.1.304.1014.1 | RowqmsENGChainInputbin | read-write | mandatory | An option in the Operator Control menu allows you to 'chain' input- bins (tray and cassettes) so that when the first inputbin empties, the printer will automat… |
| 1.3.6.1.4.1.480.1.304.1015 | ScalarqmsENGStaplePosition | read-write | mandatory | This option identifies the location of the staple when stapling is enabled. Choices Off, Front corner, Back corner, Center, Offset Stacking Default Off |
| 1.3.6.1.4.1.480.1.401 | NodeqmsAccounting | |||
| 1.3.6.1.4.1.480.1.401.1 | ScalarqmsACCMode | read-only | mandatory | |
| 1.3.6.1.4.1.480.1.401.2 | ScalarqmsACCDiskSpace | read-only | mandatory | Size of the accounting file in KB. The normal limits on this value are 50K to 10240K at the present time. |
| 1.3.6.1.4.1.480.1.401.3 | ScalarqmsACCFileSegment | read-only | mandatory | How the accounting information will be created on the disk in a single or in multiple file. |
| 1.3.6.1.4.1.480.1.402 | NodeqmsScanner | |||
| 1.3.6.1.4.1.480.1.402.3 | ScalarqmsSCColorAdjust | read-write | mandatory | Use this option to adjust brightness in copies. It allows you to adjust the brightness of halftone images. This setting is enabled by the: Copier/Copy Mode/Sel… |
| 1.3.6.1.4.1.480.1.402.4 | ScalarqmsSCScanResolution | read-write | mandatory | Use this menu to specify what resolution the scanner should use. Choices 100, 150, 200, or 300 dpi Choose a scan resolution that is at least half of the printe… |
| 1.3.6.1.4.1.480.1.402.8 | ScalarqmsSCSizeHorizontal | read-write | mandatory | Use this to scan only part of the scannable area in order to copy only part of an image or to reduce copying time for images smaller than letter or A4. |
| 1.3.6.1.4.1.480.1.402.12 | ScalarqmsSCSizeVertical | read-write | mandatory | Use this to scan only part of the scannable area in order to copy only part of an image or to reduce copying time for images smaller than letter or A4. |
| 1.3.6.1.4.1.480.1.402.16 | ScalarqmsSCOffsetHorizontal | read-write | mandatory | Use this menu to specify where the copy is to print on the selected media (in 0.01'' increments). Choices 0-850 Default 0 Notes This option assigns the top-lef… |
| 1.3.6.1.4.1.480.1.402.20 | ScalarqmsSCOffsetVertical | read-write | mandatory | Use this menu to specify where the copy is to print on the selected media (in 0.01'' increments). Choices 0-1100 Default 0 Notes This option assigns the top-le… |
| 1.3.6.1.4.1.480.1.402.24 | ScalarqmsSCCopyMode | read-write | mandatory | Use this menu to specify what type of copy is being made so the printer can optimize for this type output. Choices Automatic Gray, Custom Gray, Binary B/W, Hal… |
| 1.3.6.1.4.1.480.1.402.26 | ScalarqmsSCRedGammaFunction | read-write | mandatory | |
| 1.3.6.1.4.1.480.1.402.27 | ScalarqmsSCGreenGammaFunction | read-write | mandatory | |
| 1.3.6.1.4.1.480.1.402.28 | ScalarqmsSCBlueGammaFunction | read-write | mandatory | |
| 1.3.6.1.4.1.480.1.402.29 | ScalarqmsSCGrayGammaFunction | read-write | mandatory | Need description |
| 1.3.6.1.4.1.480.1.402.31 | ScalarqmsSCBinaryAdjustment | read-write | mandatory | |
| 1.3.6.1.4.1.480.1.402.35 | ScalarqmsSCTrans | read-write | mandatory | Use this option to specify how you want the Transparency Adapter (an optional accessory) to work. Choices Enabled: Specifies transparency document copying. Ena… |
| 1.3.6.1.4.1.480.1.402.36 | ScalarqmsSCContrast | read-write | mandatory | Use this option to adjust contrast in copies. Choices 15 contrast settings (1-15); each makes an incremental contrast change of about 2% d-Moving the setting i… |
| 1.3.6.1.4.1.480.1.403 | NodeqmsCostPerPage | |||
| 1.3.6.1.4.1.480.1.403.2 | ScalarqmsCPPSerialNumber | read-only | mandatory | Cost per page reference serial number |
| 1.3.6.1.4.1.480.1.404 | NodeqmsColorMatch | |||
| 1.3.6.1.4.1.480.1.404.1 | ScalarqmsCMMICCColorMatch | read-write | mandatory | ICC Color Matching master control for activation and deactivation of the feature on the printer Choices Disabled: Color conversion is not performed Enabled: Co… |
| 1.3.6.1.4.1.480.1.404.2 | ScalarqmsCMMICCRGBSource | read-write | mandatory | the RGB color space source profile to be used for the job in progress. Installed source profiles are registered with the color matching feature and are assigne… |
| 1.3.6.1.4.1.480.1.404.4 | ScalarqmsCMMICCSimulation | read-write | mandatory | the ICC CMYK color space simulation profile to be used for the job in progress. Installed simulation profiles are registered with the color matching feature an… |
| 1.3.6.1.4.1.480.1.404.6 | ScalarqmsCMMICCDestination | read-write | mandatory | the ICC destination color profile to be used for the job in progress. Installed destination profiles are registered with the color matching feature and are ass… |
| 1.3.6.1.4.1.480.1.404.8 | ScalarqmsCMMLinkQuality | read-write | mandatory | Color Matching device link quality to be used for any ICC device links created during execution of the current job. Three quality settings are available: low, … |
| 1.3.6.1.4.1.480.1.404.10 | ScalarqmsCMMSimInRGBLinks | read-write | mandatory | Determines if the Simulation profile selection should be used with the RGB source profile to construct the color matching device links used in RGB color space … |
| 1.3.6.1.4.1.480.1.404.12 | ScalarqmsCMMICCHP | read-write | mandatory | default ICC CMY color space profile to be used for the PCL/XL job in progress. The available CMY profiles are registered with the color matching feature, and a… |
| 1.3.6.1.4.1.480.1.404.1000 | TableqmsCMMProfileTable | not-accessible | mandatory | A table of color profiles in the printer. The user will query the printer to get all the available profiles. The profiles when read will normally be arranged i… |
| 1.3.6.1.4.1.480.1.404.1000.1 | RowqmsCMMProfileEntry | not-accessible | mandatory | Information describing ICC color profile entries. The number of entries returned is dynamic, changing based on the addition or deletion of profiles by remote u… |
| 1.3.6.1.4.1.480.1.404.1000.1.1000 | ColumnqmsCMMProfileIndex | read-only | mandatory | A value used by the printer to identify the color profile. There may be three sequence of index number corresponding to the RGBSource, Simulation and Destinati… |
| 1.3.6.1.4.1.480.1.404.1000.1.1001 | ColumnqmsCMMProfileDescription | read-only | mandatory | profile description field. This field is loaded from the ICC profile header information contained in each installed profile for the profile type and ID selecte… |
| 1.3.6.1.4.1.480.1.404.1000.1.1002 | ColumnqmsCMMProfileType | read-only | mandatory | ICC defined Profile Type. Typically, there will be more than one profile registered for each type |
| 1.3.6.1.4.1.480.1.520 | NodeqmsPS | |||
| 1.3.6.1.4.1.480.1.520.5 | ScalarqmsPSErrorHandler | read-write | mandatory | Error Handler is a diagnostic tool that identifies PostScript errors encountered during a print job. Choices Yes: Load the Error Handler at power on. No: Don't… |
| 1.3.6.1.4.1.480.1.520.6 | ScalarqmsPSOutputPositioning | read-only | mandatory | PS Flag to enable or disable output positioning. |
| 1.3.6.1.4.1.480.1.520.138 | ScalarqmsPSDefaultHalftone | read-write | mandatory | Sets the default PostScript halftone type. Choices Basic Standard Advanced Default Standard Notes Consult your printer documentation for more information. Thes… |
| 1.3.6.1.4.1.480.1.520.139 | ScalarqmsPSDefaultBlackOverPrint | read-only | mandatory | PS value.... |
| 1.3.6.1.4.1.480.1.520.140 | ScalarqmsPSDefaultCRD | read-only | mandatory | PS value for the default color rendering dictionary. |
| 1.3.6.1.4.1.480.1.520.141 | ScalarqmsPSDefaultDither | read-only | mandatory | PS value for the default dither. |
| 1.3.6.1.4.1.480.1.520.152 | ScalarqmsPSDefaultGamma | read-write | mandatory | PS value for the default gamma correction to use. |
| 1.3.6.1.4.1.480.1.520.154 | ScalarqmsPSIntensity | read-write | mandatory | Intensity uses the PostScript settrasfer operator's functionality to make the print lighter or darker while maintaining the linearity of the grayscale. Choices… |
| 1.3.6.1.4.1.480.1.524 | NodeqmsHPGL | |||
| 1.3.6.1.4.1.480.1.524.2 | ScalarqmsHPGLPaperType | read-write | mandatory | Identifies the original image's paper size. Choices A-(8.5''x 11''-216 x 279 mm), A0-(33.11'' x 46.81''-841 x 1189 mm) A1-(23.39'' x 3.11''-594 x 1189 mm) A2-(… |
| 1.3.6.1.4.1.480.1.524.12 | ScalarqmsHPGLPlotter | read-write | mandatory | Identifies the HP-GL plotter type. Choices 7475A 7470A Colorpro 7550A DraftMaster: Supports architectural and engineering paper sizes (for example, A to E and … |
| 1.3.6.1.4.1.480.1.524.13 | ScalarqmsHPGLScalingPercent | read-write | mandatory | Identifies the percentage to reduce or enlarge an image. Choices 001-150 (1-150%) Default 100 (100%) Note: To scale plots, select the paper size originally use… |
| 1.3.6.1.4.1.480.1.524.14 | ScalarqmsHPGLEnhancedMode | read-write | mandatory | Increases the resolution of the grid for downloaded characters. The HP-GL UC (User-defined Character) command allows you to down- load and draw characters usin… |
| 1.3.6.1.4.1.480.1.524.15 | ScalarqmsHPGLExpandMode | read-write | mandatory | Defines a larger imageable area which affects the default placement of the scaling points P1 and P2. Choices On: Turn on expand mode Off: Use default scaling p… |
| 1.3.6.1.4.1.480.1.524.16 | ScalarqmsHPGLPenWidth1 | read-write | mandatory | Sets the width for pen 1. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 1-7 (0.7 mm) Note A choice of 0 defaults to a pixel of '… |
| 1.3.6.1.4.1.480.1.524.17 | ScalarqmsHPGLPenWidth2 | read-write | mandatory | Sets the width for pen 2. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 2-3 (0.3 mm) Note A choice of 0 defaults to a pixel of '… |
| 1.3.6.1.4.1.480.1.524.18 | ScalarqmsHPGLPenWidth3 | read-write | mandatory | Sets the width for pen 3. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 3-3 (0.3 mm) Note A choice of 0 defaults to a pixel of '… |
| 1.3.6.1.4.1.480.1.524.19 | ScalarqmsHPGLPenWidth4 | read-write | mandatory | Sets the width for pen 4. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 4-3 (0.3 mm) Note A choice of 0 defaults to a pixel of '… |
| 1.3.6.1.4.1.480.1.524.20 | ScalarqmsHPGLPenWidth5 | read-write | mandatory | Sets the width for pen 5. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 5-3 (0.3 mm) Note A choice of 0 defaults to a pixel of '… |
| 1.3.6.1.4.1.480.1.524.21 | ScalarqmsHPGLPenWidth6 | read-write | mandatory | Sets the width for pen 6. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 6-3 (0.3 mm) Note A choice of 0 defaults to a pixel of '… |
| 1.3.6.1.4.1.480.1.524.22 | ScalarqmsHPGLPenWidth7 | read-write | mandatory | Sets the width for pen 7. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 7-3 (0.3 mm) Note A choice of 0 defaults to a pixel of '… |
| 1.3.6.1.4.1.480.1.524.23 | ScalarqmsHPGLPenWidth8 | read-write | mandatory | Sets the width for pen 8. Each pen has a width option available. Choices 0-60 (0.0-6.0 mm) Default Pen 8-3 (0.3 mm) Note A choice of 0 defaults to a pixel of '… |
| 1.3.6.1.4.1.480.1.524.24 | ScalarqmsHPGLPenColor1 | read-write | mandatory | Sets color for pen 1. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Green, Magenta, Orange, Red, Viol… |
| 1.3.6.1.4.1.480.1.524.25 | ScalarqmsHPGLPenColor2 | read-write | mandatory | Sets color for pen 2. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Green, Magenta, Orange, Red, Viol… |
| 1.3.6.1.4.1.480.1.524.26 | ScalarqmsHPGLPenColor3 | read-write | mandatory | Sets color for pen 3. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Green, Magenta, Orange, Red, Viol… |
| 1.3.6.1.4.1.480.1.524.27 | ScalarqmsHPGLPenColor4 | read-write | mandatory | Sets color for pen 4. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Green, Magenta, Orange, Red, Viol… |
| 1.3.6.1.4.1.480.1.524.28 | ScalarqmsHPGLPenColor5 | read-write | mandatory | Sets color for pen 5. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Green, Magenta, Orange, Red, Viol… |
| 1.3.6.1.4.1.480.1.524.29 | ScalarqmsHPGLPenColor6 | read-write | mandatory | Sets color for pen 6. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Green, Magenta, Orange, Red, Viol… |
| 1.3.6.1.4.1.480.1.524.30 | ScalarqmsHPGLPenColor7 | read-write | mandatory | Sets color for pen 7. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Green, Magenta, Orange, Red, Viol… |
| 1.3.6.1.4.1.480.1.524.31 | ScalarqmsHPGLPenColor8 | read-write | mandatory | Sets color for pen 8. Each pen has a color option available. Choices Black, Blue, Brown, Cyan, Gray-25%, Gray-50%, Gray- 75%, Green, Magenta, Orange, Red, Viol… |
| 1.3.6.1.4.1.480.1.525 | NodeqmsHPPCL | |||
| 1.3.6.1.4.1.480.1.525.2 | ScalarqmsHPPCLLineTermination | read-write | mandatory | Indicates the default line termination mode. This setting specifies the treatment of line feeds and carriage returns. Choices CR=CR LF=LF CR=CR+LF LF=LF CR=CR … |
| 1.3.6.1.4.1.480.1.525.4 | ScalarqmsHPPCLFontNumber | read-write | mandatory | Sets the printer's default font. Choices Courier12, Courier12bold, Courier12italic, Courier10, Courier10bold, Courier10italic, Lineprinter, Times*, Times*Itali… |
| 1.3.6.1.4.1.480.1.525.6 | ScalarqmsHPPCLLinesPerInch | read-write | mandatory | Sets the default lines printed per inch in PCL jobs, regardless of page size. Choices 100 to 4800 Default 600 Notes You must enter the number of lines per inch… |
| 1.3.6.1.4.1.480.1.525.8 | ScalarqmsHPPCLDefaultSymbolSet | read-write | mandatory | Selects the default symbol set for the emulation. Not all symbol sets are available with certain resident fonts. In particular, the Desktop, PS Math, Math 8, M… |
| 1.3.6.1.4.1.480.1.525.10 | ScalarqmsHPPCLPreJobReset | read-write | mandatory | Allows you to control the PCL 5e print environment across print jobs. Choices Off: Resets PCL to its default state at the end of each PCL print job, executes a… |
| 1.3.6.1.4.1.480.1.525.12 | ScalarqmsHPPCLPointSize | read-write | mandatory | Sets the point size for scalable default fonts in units of hundreths of a point. For example, a 24 point default point size is selected by enter- ing 2400. The… |
| 1.3.6.1.4.1.480.1.525.16 | ScalarqmsHPPCLDefaultFontID | read-write | mandatory | Sets the Default Font Index when the Default Font is set to selectbyindex. Choices 0 to 32767 Default 0 Note The index number can be obtained by the listing pr… |
| 1.3.6.1.4.1.480.1.525.18 | ScalarqmsHPPCLGL2Plotter | read-write | mandatory | Allows your printer to emulate a monochrome or color plotter. Choices On: Sets the printer to monochrome (2 pen). Off: Sets the printer to color (8 pen). Note:… |
| 1.3.6.1.4.1.480.1.525.24 | ScalarqmsHPPCLDiskOrRam | read-only | mandatory | Controls the default storage location of PCL objects (fonts, macros, and patterns) when it is not otherwise specified through DOC com- mands. Choices Disk: All… |
| 1.3.6.1.4.1.480.1.532 | NodeqmsDECLN03 | |||
| 1.3.6.1.4.1.480.1.532.4 | ScalarqmsDECLN03ProductID | read-write | mandatory | This is the emulation printer model. If your host sends a Device Attributes request to the printer, the printer responds with the Product ID. Choices LN03, LQP… |
| 1.3.6.1.4.1.480.1.532.5 | ScalarqmsDECLN03AutowrapMode | read-write | mandatory | Determines whether text that exceeds the right margin wraps to the next line. Choices Off and On Default On |
| 1.3.6.1.4.1.480.1.532.6 | ScalarqmsDECLN03PaperSize | read-write | mandatory | Specifies the paper size used at power-up or when no paper size is specified. Choices Letter, A4, Legal, and 11x17 Default Letter |
| 1.3.6.1.4.1.480.1.532.7 | ScalarqmsDECLN03PaperSizeOverride | read-write | mandatory | Controls the paper selection. If Paper Size Override is disabled, the emulation uses the transformation point for the size of paper selected and uses the curre… |
| 1.3.6.1.4.1.480.1.532.8 | ScalarqmsDECLN03Xorigin | read-write | mandatory | Moves the lower left corner of the image to the right from 0 to 300 dots (1 inch at a resolution of 300 dpi). Use this option to eliminate clipping of the righ… |
| 1.3.6.1.4.1.480.1.532.10 | ScalarqmsDECLN03Yorigin | read-write | mandatory | Moves the lower left corner of the image downward from 0 to 300 dots (1 inch at a resolution of 300 dpi). Use this option to eliminate clipping of the top edge… |
| 1.3.6.1.4.1.480.1.532.12 | ScalarqmsDECLN03Reset | read-write | mandatory | Determines whether the printer automatically resets to the initial power-up configuration before every print job or whether it retains the configuration from t… |
| 1.3.6.1.4.1.480.1.532.14 | ScalarqmsDECLN03Orientation | read-write | mandatory | Sets the printing direction of the print media. Choices Portrait: Prints the Y axis parallel to the long edge of the page. Landscape: Prints the Y axis paralle… |
| 1.3.6.1.4.1.480.1.534 | NodeqmsQUIC2 | |||
| 1.3.6.1.4.1.480.1.534.4 | ScalarqmsQUIC2CommandCharacter | read-write | mandatory | This option specifies the default command character. Enter the decimal value of the QUIC II command character. The options range from 32 to 255 with the except… |
| 1.3.6.1.4.1.480.1.534.6 | ScalarqmsQUIC2TopMargin | read-write | mandatory | This option specifies the default top page margin in dots. The available range of options is from 0000 to 9999. The default is 0060. |
| 1.3.6.1.4.1.480.1.534.8 | ScalarqmsQUIC2BottomMargin | read-write | mandatory | This option specifies in dots the default bottom page margin. The available range of options is from 0000 to 9999. The default is 0060. The status page display… |
| 1.3.6.1.4.1.480.1.534.10 | ScalarqmsQUIC2LeftMargin | read-write | mandatory | This option specifies the default left page margin in dots. The available range of options is from 0000 to 9999. The default is 0060. |
| 1.3.6.1.4.1.480.1.534.12 | ScalarqmsQUIC2RightMargin | read-write | mandatory | This option specifies the default right page margin in dots. The available range of options is from 0000 to 9999. The default is 0060. The status page displays… |
| 1.3.6.1.4.1.480.1.534.14 | ScalarqmsQUIC2IfParam | read-write | mandatory | This option determines when the printer pulls paper from a different input tray when the ^IF Paper Handling command is used. The options are * Immediate/Erase … |
| 1.3.6.1.4.1.480.1.534.15 | ScalarqmsQUIC2CReqCRLF | read-write | mandatory | This option determines whether a line feed is added to each carriage return received by the printer. The selection affects system carriage return control mode … |
| 1.3.6.1.4.1.480.1.534.16 | ScalarqmsQUIC2LFeqLFCR | read-write | mandatory | This option determines whether or not a carriage return is added to each line feed received by the printer. The selection affects system Line Feed Control comm… |
| 1.3.6.1.4.1.480.1.534.17 | ScalarqmsQUIC2Decimal | read-write | mandatory | This option selects whether implicit decimal values are interpreted as left- or right-justified or whether explicit decimals are inserted in QUIC II commands. … |
| 1.3.6.1.4.1.480.1.534.18 | ScalarqmsQUIC2Dimensions | read-write | mandatory | This option determines whether dimensions in QUIC II commands are interpreted as inches, centimeters, or dots. Refer to the QUICII documentation for informatio… |
| 1.3.6.1.4.1.480.1.534.19 | ScalarqmsQUIC2EDPMode | read-write | mandatory | This option specifies the lines-per-inch setting used in QUIC II Line Printer mode. The default uses the setting of the Lines Per Inch option. The options are … |
| 1.3.6.1.4.1.480.1.534.20 | ScalarqmsQUIC2DefaultFont | read-write | mandatory | This option specifies a default font to be active when QUIC II is entered. It also is the default font for QUIC II Line Printer mode. Refer the QUICII document… |
| 1.3.6.1.4.1.480.1.534.22 | ScalarqmsQUIC2LineSpacing | read-write | mandatory | This option selects the lines-per-inch setting to be used for printing. Refer to the QUICII documentation for information. The options are 6 (6 lines/inch) and… |
| 1.3.6.1.4.1.480.1.534.23 | ScalarqmsQUIC2Orientation | read-write | mandatory | This option controls the direction of printing on the page. Portrait orientation is 0 deg. rotation and landscape orientation is 270 deg. rotation. Refer to th… |
| 1.3.6.1.4.1.480.1.534.24 | ScalarqmsQUIC2Scan | read-write | mandatory | |
| 1.3.6.1.4.1.480.1.534.25 | ScalarqmsQUIC2Spaces | read-write | mandatory | This option allow you to ignore leading/trailing spaces in numeric values. The options are On (absorb leading/ trailing spaces) and Off (do not absorb leading/… |
| 1.3.6.1.4.1.480.1.534.26 | ScalarqmsQUIC2AllowDataRepeats | read-write | mandatory | This option enables or disables the ^DR Data Repeat command. Refer to the QUICII documentation for information about this command. The options are On (allow Da… |
| 1.3.6.1.4.1.480.1.534.27 | ScalarqmsQUIC2AllowOverlays | read-write | mandatory | This option enables or disables all Overlay commands. Refer to the QUICII documentation for information about overlays. The options are On (allow Overlay comma… |
| 1.3.6.1.4.1.480.1.534.28 | ScalarqmsQUIC2AllowPageCopies | read-write | mandatory | This option enables or disables the Multiple Copy command. Refer to the QUICII documentation for additional information. The options are On (allow multiple or … |
| 1.3.6.1.4.1.480.1.534.29 | ScalarqmsQUIC2SaveDLF | read-write | mandatory | This option allows you to choose whether or not all downloaded fonts are retained on disk. If this option is not enabled and the power is turned off, the fonts… |
| 1.3.6.1.4.1.480.1.534.30 | ScalarqmsQUIC2SaveOverlays | read-write | mandatory | This option allows you to choose whether or not all overlays are retained on disk. If this option is not enabled and the power is turned off, the overlays are … |
| 1.3.6.1.4.1.480.1.534.31 | ScalarqmsQUIC2DefaultMode | read-write | mandatory | This option selects QUIC II Line Printer mode or QUIC II command mode with or without Free Format. Refer to the QUICII documentation for information on the two… |
| 1.3.6.1.4.1.480.1.534.32 | ScalarqmsQUIC2RebuildFontTable | read-write | mandatory | This option determines whether or not characters that have been inserted into downloaded fonts with a Font Definition command (^DFA) are erased or retained whe… |
| 1.3.6.1.4.1.480.1.534.33 | ScalarqmsQUIC2TrayMap1 | read-write | mandatory | Map Tray 1 To: |
| 1.3.6.1.4.1.480.1.534.34 | ScalarqmsQUIC2TrayMap2 | read-write | mandatory | Map Tray 2 To: |
| 1.3.6.1.4.1.480.1.534.35 | ScalarqmsQUIC2TrayMap3 | read-write | mandatory | Map Tray 3 To: |
| 1.3.6.1.4.1.480.1.534.36 | ScalarqmsQUIC2TrayMap4 | read-write | mandatory | Map Tray 4 To: |
| 1.3.6.1.4.1.480.1.534.37 | ScalarqmsQUIC2TrayMap5 | read-write | mandatory | Map Tray 5 To: |
| 1.3.6.1.4.1.480.1.534.38 | ScalarqmsQUIC2PatternType | read-write | mandatory | This option allows the patterns to be either opaque or transparent. The default value is opaque. |
| 1.3.6.1.4.1.480.1.538 | NodeqmsCCITT | |||
| 1.3.6.1.4.1.480.1.539 | NodeqmsLinePrinter | |||
| 1.3.6.1.4.1.480.1.539.4 | ScalarqmsLPPointSize | read-write | mandatory | Sets the five-digit value used to specify the point size of the font for the current print job. Choices 00000-99999 Default 00880 (8.8 points) |
| 1.3.6.1.4.1.480.1.539.8 | ScalarqmsLPTabStops | read-write | mandatory | Specifies the number of spaces between tab stops. Choices 0-256 Default 8 |
| 1.3.6.1.4.1.480.1.539.12 | ScalarqmsLPLinesPerPage | read-write | mandatory | Specifies the number of lines printed on a page before an automatic page eject. Interline spacing is set to the selected point size. Logical pages consisting o… |
| 1.3.6.1.4.1.480.1.539.16 | ScalarqmsLPLeftMargin | read-write | mandatory | Defines the left margin in 1/7200'' increments. Choices Left 0-79200 (0''-11.00'') Default Left 0 Note The margins are in 1/7200 increments (79200 is 11.00'' i… |
| 1.3.6.1.4.1.480.1.539.20 | ScalarqmsLPRightMargin | read-write | mandatory | Defines the right margin in 1/7200'' increments. Choices Right 0-79200 (0''-11.00'') Default Right 0 Note The margins are in 1/7200 increments (79200 is 11.00'… |
| 1.3.6.1.4.1.480.1.539.24 | ScalarqmsLPTopMargin | read-write | mandatory | Defines the top margin in 1/7200'' increments. Choices Top 0-79200 (0''-11.00'') Default Top 0 Note The margins are in 1/7200 increments (79200 is 11.00'' in 1… |
| 1.3.6.1.4.1.480.1.539.28 | ScalarqmsLPBottomMargin | read-write | mandatory | Defines the bottom margin in 1/7200'' increments. Choices Bottom 0-79200 (0''-11.00'') Default Bottom 0 Note The margins are in 1/7200 increments (79200 is 11.… |
| 1.3.6.1.4.1.480.1.539.32 | ScalarqmsLPAsciiMap | read-write | mandatory | Specifies the type of character map to be used. Choices ASCII, EBCDIC, PC ASCII, PC Multilingual Default ASCII Note If you select the PC ASCII or PC Multilingu… |
| 1.3.6.1.4.1.480.1.539.34 | ScalarqmsLPLineNumbering | read-write | mandatory | Specifies that a five-digit number is to be prefixed to each line. Choices On: Number all lines. Off: Don't number lines. Default Off |
| 1.3.6.1.4.1.480.1.539.36 | ScalarqmsLPLFisCRLF | read-write | mandatory | Stipulates whether each line feed (LF) in the print job is translated to a carriage return/line feed (CRLF) combination. Choices On: Translate all line feeds t… |
| 1.3.6.1.4.1.480.1.539.38 | ScalarqmsLPCRisCRLF | read-write | mandatory | Stipulates whether each carriage return (CR) in the print job is trans- lated to a carriage return/line feed (CRLF) combination. Choices On: Translate all carr… |
| 1.3.6.1.4.1.480.1.539.40 | ScalarqmsLPFFisCRFF | read-write | mandatory | Stipulates whether each form feed (FF) in the print job is translated to a carriage return/form feed (CRFF) combination. Choices On: Translate all form feeds t… |
| 1.3.6.1.4.1.480.1.539.42 | ScalarqmsLPOrientation | read-write | mandatory | Specifies whether text and graphics are placed on the page in a por- trait or landscape orientation. Choices Landscape Portrait Default Portrait |
| 1.3.6.1.4.1.480.1.539.44 | ScalarqmsLPLineWrap | read-write | mandatory | Indicates whether long lines are to be wrapped to the next line instead of being truncated. Choices On: Wrap long lines. Off: Truncate long lines. Default On |
| 1.3.6.1.4.1.480.1.539.46 | ScalarqmsLPFont | read-write | mandatory | Sets the printer fonts for the current print job. Any PostScript fonts available on the printer can be used. To see a list of available Post- Script fonts, pri… |
| 1.3.6.1.4.1.480.1.541 | NodeqmsTIFF | |||
| 1.3.6.1.4.1.480.1.541.1 | ScalarqmsTIFFAutoRotation | read-write | mandatory | Allows you to specify whether the TIFF image should be automatically rotated 90 degrees if this would result in a better fit on the currently selected paper si… |
| 1.3.6.1.4.1.480.1.541.2 | ScalarqmsTIFFScratchFileSize | read-write | mandatory | Allows you to define the size of the scratch file (in MB) that is created on the printer's hard disk to contain the image during processing. Choices 0: No scra… |
| 1.3.6.1.4.1.480.1.541.3 | ScalarqmsTIFFPaperToImage | read-write | mandatory | Allows you to specify whether the TIFF emulation should automatically select the paper size closest to the image size rather than using the default paper size.… |
| 1.3.6.1.4.1.480.1.541.4 | ScalarqmsTIFFAnnotationState | read-write | mandatory | Allows you to enable or disable annotation. Choices Enabled, Disabled Default Disabled |
| 1.3.6.1.4.1.480.1.541.5 | ScalarqmsTIFFAnnotationTag | read-write | mandatory | Identifies the annotation tag number. Choices 0-65000 Default 1000 |
| 1.3.6.1.4.1.480.1.541.7 | ScalarqmsTIFFReverseImage | read-write | mandatory | Allows you to turn reverse image 'on' or 'off'. Choices on, off Default off |
| 1.3.6.1.4.1.480.1.541.50 | ScalarqmsTIFFAutoScaling | read-write | mandatory | Allows you to specify whether the TIFF image should be scaled (up or down) to fit on the currently selected paper size. Choices Off, Down Only, Up Only, Up & D… |
| 1.3.6.1.4.1.480.1.542 | NodeqmsCALS | |||
| 1.3.6.1.4.1.480.1.542.1 | ScalarqmsCALSAutoRotation | read-write | mandatory | Allows you to specify whether the CALS image should be automatically rotated 90 degrees if this would result in a better fit on the currently selected paper si… |
| 1.3.6.1.4.1.480.1.542.50 | ScalarqmsCALSAutoScaling | read-write | mandatory | Allows you to specify whether the CALS image should be automatically scaled (up or down) to fit on the currently selected paper size. Choices Off, Up & Down, U… |
| 1.3.6.1.4.1.480.1.544 | NodeqmsCGM | |||
| 1.3.6.1.4.1.480.1.544.1 | ScalarqmsCGMSuppressScale | read-write | mandatory | Specifies whether the file should be scaled. Choices No: The file is scaled. Yes: The file is NOT scaled. Default No Notes If yes is Selected and a file with m… |
| 1.3.6.1.4.1.480.1.544.2 | ScalarqmsCGMMono | read-write | mandatory | Specifies whether the file should be printed in monochrome or color. Choices On: The file prints in monochrome. Off: The file prints in color. Default Off Note… |
| 1.3.6.1.4.1.480.1.544.3 | ScalarqmsCGMIgnoreBorder | read-write | mandatory | Causes the non-printable area of a page to be ignored. Choices Yes, No Default No Notes If the non-printable area is ignored, the image is shifted up and to th… |
| 1.3.6.1.4.1.480.1.544.4 | ScalarqmsCGMOriginX | read-write | mandatory | The viewport origin, along with the viewport size, determines the paper size selected. The image is scaled to fit within the specified viewport. Specifies the … |
| 1.3.6.1.4.1.480.1.544.8 | ScalarqmsCGMOriginY | read-write | mandatory | The viewport origin, along with the viewport size, determines the paper size selected. The image is scaled to fit within the specified viewport. Specifies the … |
| 1.3.6.1.4.1.480.1.544.12 | ScalarqmsCGMPrintErrors | read-write | mandatory | Causes an additional page, listing errors encountered, to print if a CGM job contains errors. Choices Yes, No Default No |
| 1.3.6.1.4.1.480.2 | NodeqmsRel | |||
| 1.3.6.1.4.1.480.2 | NodetrapNewIPaddr | The IP address has been changed by RARP or an 'arp -s'. | ||
| 1.3.6.1.4.1.480.2.1 | NodeqmsPrinter | |||
| 1.3.6.1.4.1.480.2.1.1 | NodeqmsPtrSys | |||
| 1.3.6.1.4.1.480.2.1.1.1 | ScalarqmsPtrSysStatus | read-only | mandatory | A text string indicating the current printer status. |
| 1.3.6.1.4.1.480.2.1.1.2 | ScalarqmsPtrSysNamePrinter | read-only | optional | A text string indicating the current printer name. |
| 1.3.6.1.4.1.480.2.1.1.3 | TableqmsPtrIfTable | not-accessible | mandatory | A list of interfaces supported by this printer and their currently selected default emulations. |
| 1.3.6.1.4.1.480.2.1.1.3.1 | RowqmsPtrIfEntry | not-accessible | mandatory | An interface entry containing an interface and it currently selected dafault emulation. |
| 1.3.6.1.4.1.480.2.1.1.3.1.1 | ColumnqmsPtrIfIndex | read-only | mandatory | A unique value for each interface. Its value ranges between 1 and the number of intrfaces, qmsPtrIfNumber. This value must remain the same between successive p… |
| 1.3.6.1.4.1.480.2.1.1.3.1.2 | ColumnqmsPtrIfName | read-only | mandatory | The name of the interface. |
| 1.3.6.1.4.1.480.2.1.1.3.1.3 | ColumnqmsPtrIfDefEmu | read-only | mandatory | The name of the currently selected default emulation for this interface. |
| 1.3.6.1.4.1.480.2.1.1.4 | TableqmsPtrBinTable | not-accessible | mandatory | A list of input/output paper trays supported by this printer and their currently selected paper sizes and bin names. Note: paper sizes are not assigned to outp… |
| 1.3.6.1.4.1.480.2.1.1.4.1 | RowqmsPtrBinEntry | not-accessible | mandatory | A paper tray entry containing its currently selected default paper size and paper tray name. |
| 1.3.6.1.4.1.480.2.1.1.4.1.1 | ColumnqmsPtrBinIndex | read-only | mandatory | A unique value for each input/output bin. Its value ranges between 1 and the number of input/output bins, qmsPtrBinNumber. This value must remain the same betw… |
| 1.3.6.1.4.1.480.2.1.1.4.1.2 | ColumnqmsPtrBinType | read-only | mandatory | The input/output tray designator (input=1, output=0). |
| 1.3.6.1.4.1.480.2.1.1.4.1.3 | ColumnqmsPtrBinId | read-only | mandatory | The input tray designator. |
| 1.3.6.1.4.1.480.2.1.1.4.1.4 | ColumnqmsPtrBinPaper | read-only | mandatory | The name of the currently selected paper size for this paper tray (applies to input paper trays only). |
| 1.3.6.1.4.1.480.2.1.1.4.1.5 | ColumnqmsPtrBinName | read-only | mandatory | The name currently assigned to this paper tray. |
| 1.3.6.1.4.1.480.2.1.2 | NodeqmsPtrEmu | |||
| 1.3.6.1.4.1.480.2.1.3 | NodeqmsPtrJobs | |||
| 1.3.6.1.4.1.480.2.1.3.1 | ScalarqmsPtrJobsCurStatus | read-only | mandatory | The current job entries status. |
| 1.3.6.1.4.1.480.2.1.3.2 | ScalarqmsPtrJobsCurSheet | read-only | mandatory | The sheet being imaged for the current job. |
| 1.3.6.1.4.1.480.2.1.3.3 | ScalarqmsPtrJobsCurPage | read-only | mandatory | The page being imaged for the current job. |
| 1.3.6.1.4.1.480.2.1.3.4 | TableqmsPtrJobsTable | not-accessible | mandatory | A list of the status, byte size, emulation, page number, sheet number, channel number, comment string, job title, and job originator string for all jobs curren… |
| 1.3.6.1.4.1.480.2.1.3.4.1 | RowqmsPtrJobsEntry | not-accessible | mandatory | The current job entry containing its current status, sheet number, and page number. |
| 1.3.6.1.4.1.480.2.1.3.4.1.1 | ColumnqmsPtrJobsIndex | read-only | mandatory | A unique value for each currently active job. Its value ranges between 1 and the number of currently active jobs, qmsPtrJobsNumber. This value must remain the … |
| 1.3.6.1.4.1.480.2.1.3.4.1.2 | ColumnqmsPtrJobsStatus | read-only | mandatory | The job status. |
| 1.3.6.1.4.1.480.2.1.3.4.1.4 | ColumnqmsPtrJobsEmulation | read-only | mandatory | The emulation selected for the processing of this job. |
| 1.3.6.1.4.1.480.2.1.3.4.1.5 | ColumnqmsPtrJobsPage | read-only | mandatory | The number of pages defined for this job. Note: Sheets are defined as the physical sheet of paper as opposed to the number of logical page images appearing on … |
| 1.3.6.1.4.1.480.2.1.3.4.1.6 | ColumnqmsPtrJobsSheet | read-only | mandatory | The number of sheets defined for this job. Note: Sheets are defined as the physical sheet of paper as opposed to the number of logical page images appearing on… |
| 1.3.6.1.4.1.480.2.1.3.4.1.7 | ColumnqmsPtrJobsChannel | read-only | mandatory | The interface over which this job was communicated to the printer. |
| 1.3.6.1.4.1.480.2.1.3.4.1.8 | ColumnqmsPtrJobsComment | read-only | mandatory | A user defined text string sent with this job. |
| 1.3.6.1.4.1.480.2.1.3.4.1.9 | ColumnqmsPtrJobsTitle | read-only | mandatory | A user defined text string, usually the name of the job. |
| 1.3.6.1.4.1.480.2.1.3.4.1.10 | ColumnqmsPtrJobsOwner | read-only | mandatory | A user defined text string, usually the username of the person originating the job. |
| 1.3.6.1.4.1.480.2.1.3.6 | ScalarqmsPtrJobsStatPages | read-only | mandatory | The total number of pages printed for all jobs processed by the printer since the last power cycle. Note: Sheets are defined as the physical sheet of paper as … |
| 1.3.6.1.4.1.480.2.1.3.7 | ScalarqmsPtrJobsStatSheets | read-only | mandatory | The total number of sheets printed for all jobs processed by the printer since the last power cycle. Note: Sheets are defined as the physical sheet of paper as… |
| 1.3.6.1.4.1.480.2.9 | NodeqmsIF | |||
| 1.3.6.1.4.1.480.2.9.1 | NodeqmsIFAdmin | |||
| 1.3.6.1.4.1.480.2.9.1.1 | ScalarqmsIFAdminUnitStatus | read-write | mandatory | The units's operational status. A value other than (1) will reset the unit. |
| 1.3.6.1.4.1.480.2.9.1.2 | ScalarqmsIFAdminConfigStatus | read-write | mandatory | The units's configuration status. read-only values: (1) reserved for future use. (2) reserved for future use. write-only values : (3) will load permanent value… |
| 1.3.6.1.4.1.480.2.9.1.3 | ScalarqmsIFAdminOldIntAddr | read-write | mandatory | The Internet Address at power-on or before change by RARP or 'arp -s'. |
| 1.3.6.1.4.1.480.2.9.2 | NodeqmsIFSetup | |||
| 1.3.6.1.4.1.480.2.9.2.1 | NodeqmsIFConfig | |||
| 1.3.6.1.4.1.480.2.9.2.1.1 | ScalarintAddr | read-write | mandatory | The Internet Address. |
| 1.3.6.1.4.1.480.2.9.2.1.2 | ScalarethAddr | read-only | mandatory | The Ethernet Address. |
| 1.3.6.1.4.1.480.2.9.2.1.3 | ScalardefRout | read-write | mandatory | The Default Router. |
| 1.3.6.1.4.1.480.2.9.2.1.4 | ScalarnetMask | read-write | mandatory | The Net Mask. |
| 1.3.6.1.4.1.480.2.9.2.1.5 | ScalartcpEnb | read-write | mandatory | The TCP protocol stack enable switch. |
| 1.3.6.1.4.1.480.2.9.2.1.13 | ScalartftpEnb | read-write | mandatory | The TFTP protocol enable switch. |
| 1.3.6.1.4.1.480.2.9.2.1.16 | ScalartnPort | read-write | obsolete | The Telnet TCP Port. This object is obsolete. |
| 1.3.6.1.4.1.480.2.9.2.1.18 | ScalarrtnOpt | read-write | obsolete | The Reverse Telnet option handling switch. This object is obsolete. |
| 1.3.6.1.4.1.480.2.9.2.1.30 | ScalartrP1 | read-write | mandatory | The Transport 1 Port. |
| 1.3.6.1.4.1.480.2.9.2.1.698 | ScalarbootP | read-write | mandatory | Boot Strap protocal enable/disable. |
| 1.3.6.1.4.1.480.2.9.2.1.699 | Scalarrarp | read-write | mandatory | Reverse address resolution enable/disable. |
| 1.3.6.1.4.1.480.2.9.2.1.9000 | Scalarspooling | read-write | mandatory | Job spooling option. |
| 1.3.6.1.4.1.480.2.9.2.5 | NodeqmsIFNetware | |||
| 1.3.6.1.4.1.480.2.9.2.5.400 | ScalarnetwEnb | read-write | mandatory | The NetWare protocol stack enable switch. |
| 1.3.6.1.4.1.480.2.9.2.5.401 | ScalarpsName | read-write | mandatory | The NetWare print server name. |
| 1.3.6.1.4.1.480.2.9.2.5.402 | ScalarconfServ | read-write | mandatory | The NetWare configuration file server name. |
| 1.3.6.1.4.1.480.2.9.2.5.403 | ScalarmsgLog | read-write | mandatory | The NetWare message log mode. |
| 1.3.6.1.4.1.480.2.9.2.5.404 | ScalarnwMode | read-write | mandatory | The NetWare print mode. |
| 1.3.6.1.4.1.480.2.9.2.5.405 | ScalarpsPoll | read-write | mandatory | The NetWare print server poll time. |
| 1.3.6.1.4.1.480.2.9.2.5.420 | Scalarfr8023 | read-write | mandatory | The 802.3 frame support switch for NetWare. |
| 1.3.6.1.4.1.480.2.9.2.5.421 | Scalarfreth2 | read-write | mandatory | The Ethernet-2 frame support switch for NetWare. |
| 1.3.6.1.4.1.480.2.9.2.5.422 | Scalarfr8022 | read-write | mandatory | The 802.2 frame support switch for NetWare. |
| 1.3.6.1.4.1.480.2.9.2.5.423 | ScalarfrSnap | read-write | mandatory | The SNAP frame support switch for NetWare. |
| 1.3.6.1.4.1.480.2.9.2.5.432 | Scalarlogin1 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.433 | Scalarlogin2 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.434 | Scalarlogin3 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.435 | Scalarlogin4 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.436 | Scalarlogin5 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.437 | Scalarlogin6 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.438 | Scalarlogin7 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.439 | Scalarlogin8 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.440 | Scalarlogin9 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.441 | Scalarlogin10 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.442 | Scalarlogin11 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.443 | Scalarlogin12 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.444 | Scalarlogin13 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.445 | Scalarlogin14 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.446 | Scalarlogin15 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.447 | Scalarlogin16 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.480.2.9.2.5.470 | Scalarrprinter1 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.480.2.9.2.5.471 | Scalarrprinter2 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.480.2.9.2.5.472 | Scalarrprinter3 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.480.2.9.2.5.473 | Scalarrprinter4 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.480.2.9.2.5.474 | Scalarrprinter5 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.480.2.9.2.5.475 | Scalarrprinter6 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.480.2.9.2.5.476 | Scalarrprinter7 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.480.2.9.2.5.477 | Scalarrprinter8 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.480.2.9.2.6 | NodeqmsIFApple | |||
| 1.3.6.1.4.1.480.2.9.2.6.500 | ScalaratlkEnb | read-write | mandatory | The AppleTalk protocol stack enable switch. |
| 1.3.6.1.4.1.480.2.9.2.6.502 | ScalaratlkZone | read-write | mandatory | The AppleTalk zone name. |
| 1.3.6.1.4.1.480.2.9.2.6.503 | ScalaratlkZonerEnb | read-write | mandatory | The AppleTalk HP Zoner support enable switch. |
| 1.3.6.1.4.1.480.2.9.2.6.560 | ScalaratlkLWEnb | read-write | mandatory | The AppleTalk LaserWriter support enable switch. |
| 1.3.6.1.4.1.480.2.9.2.6.561 | ScalaratlkQMSRemConEnb | read-write | mandatory | The AppleTalk QMS Remote Console support enable switch. |
| 1.3.6.1.4.1.480.2.9.2.6.562 | ScalaratlkConnType | read-write | mandatory | The AppleTalk connection type. |
| 1.3.6.1.4.1.480.2.9.2.8 | NodeqmsIFSnmpcontrol | |||
| 1.3.6.1.4.1.480.2.9.2.8.715 | ScalarenableAuthenTraps | read-write | mandatory | Same as snmpEnableAuthenTraps in MIB-II. |
| 1.3.6.1.4.1.480.2.9.2.8.716 | ScalarenablePrinterTraps | read-write | mandatory | Enables the enterprise specific 'trapPrinter' traps. |
| 1.3.6.1.4.1.480.2.9.2.8.730 | Scalarnms1Address | read-write | mandatory | The IP address of NMS 1 definition. |
| 1.3.6.1.4.1.480.2.9.2.8.731 | Scalarnms1Community | read-write | mandatory | The community of NMS 1 definition. |
| 1.3.6.1.4.1.480.2.9.2.8.732 | Scalarnms1Access | read-write | mandatory | The access priviledge of NMS 1. |
| 1.3.6.1.4.1.480.2.9.2.8.735 | Scalarnms2Address | read-write | mandatory | The IP address of NMS 2 definition. |
| 1.3.6.1.4.1.480.2.9.2.8.736 | Scalarnms2Community | read-write | mandatory | The community of NMS 2 definition. |
| 1.3.6.1.4.1.480.2.9.2.8.737 | Scalarnms2Access | read-write | mandatory | The access priviledge of NMS 2. |
| 1.3.6.1.4.1.480.2.9.2.8.740 | Scalarnms3Address | read-write | mandatory | The IP address of NMS 3 definition. |
| 1.3.6.1.4.1.480.2.9.2.8.741 | Scalarnms3Community | read-write | mandatory | The community of NMS 3 definition. |
| 1.3.6.1.4.1.480.2.9.2.8.742 | Scalarnms3Access | read-write | mandatory | The access priviledge of NMS 3. |
| 1.3.6.1.4.1.480.2.9.2.8.745 | Scalarnms4Address | read-write | mandatory | The IP address of NMS 4 definition. |
| 1.3.6.1.4.1.480.2.9.2.8.746 | Scalarnms4Community | read-write | mandatory | The community of NMS 4 definition. |
| 1.3.6.1.4.1.480.2.9.2.8.747 | Scalarnms4Access | read-write | mandatory | The access priviledge of NMS 4. |
| 1.3.6.1.4.1.480.2.9.2.8.750 | Scalarnms5Address | read-write | mandatory | The IP address of NMS 5 definition. |
| 1.3.6.1.4.1.480.2.9.2.8.751 | Scalarnms5Community | read-write | mandatory | The community of NMS 5 definition. |
| 1.3.6.1.4.1.480.2.9.2.8.752 | Scalarnms5Access | read-write | mandatory | The access priviledge of NMS 5. |
| 1.3.6.1.4.1.480.2.9.2.9 | NodeqmsIFLservlmgr | |||
| 1.3.6.1.4.1.480.2.9.2.9.800 | ScalarlslmEnb | read-write | mandatory | The Lan Serv/Lan Mgr protocol stack enable switch. |
| 1.3.6.1.4.1.480.2.10 | NodeqmsConfig | |||
| 1.3.6.1.4.1.480.2.10.10 | NodeqmsCfgUser | |||
| 1.3.6.1.4.1.480.2.10.20 | NodeqmsCfgAdmin | |||
| 1.3.6.1.4.1.480.2.10.30 | NodeqmsCfgSecurity |