MIB Viewer

RAD-MIB

4477 objects
No module-level DESCRIPTION found.
Imported Objects
ATM-MIBatmTrafficDescrParamEntry atmVcCrossConnectEntry atmVclVci atmVclVpi atmVpCrossConnectEntry atmVplVpi
BRIDGE-MIBBridgeId dot1dBasePortEntry Timeout
DISMAN-SCHEDULE-MIBschedEntry
DOT3-OAM-MIBdot3OamEntry dot3OamOperStatus
DS1-MIBdsx1CurrentIndex dsx1IntervalIndex dsx1IntervalNumber dsx1LineIndex dsx1LineStatus dsx1LineStatusLastChange dsx1LoopbackStatus dsx1TotalIndex
DS3-MIBdsx3ConfigEntry dsx3LineStatus dsx3LoopbackStatus
IANAifType-MIBIANAifType
IEEE8021-CFM-MIBdot1agCfmMaIndex dot1agCfmMdIndex dot1agCfmMepDbRMepIdentifier dot1agCfmMepIdentifier
IF-MIBifAlias ifDescr ifIndex InterfaceIndex
INET-ADDRESS-MIBInetAddress txt InetAddressType
LLDP-MIBLldpPortIdSubtype
PerfHist-TC-MIBPerfCurrentCount PerfIntervalCount PerfTotalCount
Q-BRIDGE-MIBdot1qVlanStaticEntry PortList VlanId
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-SMICounter32 Counter64 enterprises Gauge32 Integer32 IpAddress NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDateAndTime DisplayString MacAddress RowPointer RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.164Noderad
1.3.6.1.4.1.164.1NoderadTokenRing
1.3.6.1.4.1.164.2NoderadFddi
1.3.6.1.4.1.164.3NoderadWan
1.3.6.1.4.1.164.3.1NodewanGen
1.3.6.1.4.1.164.3.1.1NodechasWanGen
1.3.6.1.4.1.164.3.1.1.1ScalarchasVersionread-onlycurrentAn ASCII string for description and display of the agent chassis version.
1.3.6.1.4.1.164.3.1.1.2ScalarchasTotalNoOfSltread-onlycurrentThis entry indicates the number of physical slots in the chassis.
1.3.6.1.4.1.164.3.1.1.3ScalarchasTotalNoOfIoSltread-onlycurrentThis entry indicates the total number of physical IO slots in the chassis, (not all slots hardware should be occupied and active) .
1.3.6.1.4.1.164.3.1.1.4ScalarchasTotalNoOfPsSltread-onlycurrentThis entry indicates the number of physical Power Supply slots in the chassis.
1.3.6.1.4.1.164.3.1.1.5ScalarchasTotalNoOfClSltread-onlycurrentThis entry indicates the number of physical Common Logic slots in the chassis.
1.3.6.1.4.1.164.3.1.2NodeagnWanGen
1.3.6.1.4.1.164.3.1.2.1NodestatAgnGen
1.3.6.1.4.1.164.3.1.2.1.1ScalaragnSDateFormatread-writecurrentThis entry indicates the date and time format used for the agnSDateAndTimeCmd and for the alarm history report.
1.3.6.1.4.1.164.3.1.2.1.2ScalaragnSDateCmdread-writecurrentThis entry indicates the current date as it is known by the agent using its own real-time clock. The format would be as specified by the agnSDateFormat. This p…
1.3.6.1.4.1.164.3.1.2.1.3ScalaragnSTimeCmdread-writecurrentThis entry indicates the current time as it is known by the agent using its own real-time clock. This parameter can be set for time synchronization between the…
1.3.6.1.4.1.164.3.1.2.1.4ScalaragnSActiveCnfgread-onlycurrentThis entry specifies the unique identifier of the configuration, that is currently active and running.
1.3.6.1.4.1.164.3.1.2.1.5ScalaragnSEditCnfgread-onlycurrentThis entry indicates the unique identifier of the configuration that is currently loaded into the tmp working space for manipulation and update operations. Val…
1.3.6.1.4.1.164.3.1.2.1.6ScalaragnSLastCnfgFlipTimeread-onlycurrentThis entry indicates the Date & Time of the last flip to the current configuration at the agent.
1.3.6.1.4.1.164.3.1.2.1.7ScalaragnSLastCnfgFlipCauseread-onlycurrentThis entry describes the flip's cause.
1.3.6.1.4.1.164.3.1.2.1.8ScalaragnSEditByread-onlycurrentThis entry indicates which MMI application is working on the edited config. The editing phase starts at the first modify operation and ends after an update(loa…
1.3.6.1.4.1.164.3.1.2.1.9ScalaragnSClkSrcread-onlycurrentThis entry indicates the source of the system clock.
1.3.6.1.4.1.164.3.1.2.1.10ScalaragnSAlrStatusread-onlycurrentIndicates the alarm state in the agent level, i.e. lower level (card/port) alarms not included. critical(7) - when there is at least one active (state ON) crit…
1.3.6.1.4.1.164.3.1.2.1.11ScalaragnSAlrStatusAllread-onlycurrentIndicates the alarm state of the entire agent, i.e. including card and port alarms status. critical(7) - when there is at least one active (state ON) critical …
1.3.6.1.4.1.164.3.1.2.1.12ScalaragnSMaskedAlrStatread-onlycurrentIndicates the alarm state in the agent level,[ i.e. lower level (card/port) alarms not included] including Masked alarms. critical(7) - when there is at least …
1.3.6.1.4.1.164.3.1.2.1.13ScalaragnSMaskedAlrStatAllread-onlycurrentIndicates the alarm state of the entire agent, i.e. including card and port alarms status,including Masked alarms. critical(7) - when there is at least one act…
1.3.6.1.4.1.164.3.1.2.1.14ScalaragnSTstStatAllread-onlycurrenton(3) - when there is at least one test in progress in one of the agent cards, otherwise the value will be off(2).
1.3.6.1.4.1.164.3.1.2.1.15TableagnSAlrTablenot-accessiblecurrentList of agent related alarms and indications for alarms at system level.
1.3.6.1.4.1.164.3.1.2.1.15.1RowagnSAlrEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.1.15.1.1ColumnagnSAlrIdxread-onlycurrentA unique number to identify an entry in the alarm status table of the agent.
1.3.6.1.4.1.164.3.1.2.1.15.1.2ColumnagnSAlrCodeDescriptionread-onlycurrentThis attribute is a full text description of the alarm . The alarm description includes the following information: alarm code, alarm text, alarm severity, Mask…
1.3.6.1.4.1.164.3.1.2.1.15.1.3ColumnagnSAlrCoderead-onlycurrentA code identifying the alarm of an entry in the alarm status table at system level.
1.3.6.1.4.1.164.3.1.2.1.15.1.4ColumnagnSAlrSeverityread-onlycurrentThe severity of the alarm.
1.3.6.1.4.1.164.3.1.2.1.15.1.5ColumnagnSAlrStateread-onlycurrentState of the alarm.
1.3.6.1.4.1.164.3.1.2.1.15.1.6ColumnagnSAlrCounterread-onlycurrentA counter - how many times the alarm occured since last clear operation. ON and OFF Alarm will be counted separately.
1.3.6.1.4.1.164.3.1.2.1.15.1.7ColumnagnSAlrMaskread-onlycurrentAlarm mask : on/off.
1.3.6.1.4.1.164.3.1.2.1.15.1.8ColumnagnSAlrInvertread-onlycurrentAlarm invert : on/off.
1.3.6.1.4.1.164.3.1.2.1.16ScalaragnSClearAlrCmdread-writecurrentSetting this attribute to ON, enforce a clear operation on all the agent(general) events. General alarms are alarms which are not specific to a card or port. T…
1.3.6.1.4.1.164.3.1.2.1.17ScalaragnSClearAllAlrCmdread-writecurrentSetting this attribute to ON, enforce a clear operation on all MUX alarm events at the levels of agent, slots and ports. The clear operation will not be applie…
1.3.6.1.4.1.164.3.1.2.1.18ScalaragnSSanityCheckStatusread-onlycurrentUpon completion of the Sanity check process on the TmpCnfg this attribute will be set to: FAIL(2) - when there is at least one error encountered and possibly s…
1.3.6.1.4.1.164.3.1.2.1.19ScalaragnSNoOfSanityCheckErrread-onlycurrentThis entry indicates the number of errors/warnings discovered by the last SanityCheck process.
1.3.6.1.4.1.164.3.1.2.1.20TableagnSErrListTablenot-accessiblecurrentList of errors and warnings found during Sanity Check process.
1.3.6.1.4.1.164.3.1.2.1.20.1RowagnSErrListEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.1.20.1.1ColumnagnSErrIdxread-onlycurrentUnique number to identify an entry in the error list table. The maximum entry value cannot exceed the value of 'agnSNoOfSanityCheckErr'.
1.3.6.1.4.1.164.3.1.2.1.20.1.2ColumnagnSErrDescriptionread-onlycurrentThis attribute is a full text description of the sanity check error including error code, slot and port numbers related to the code .
1.3.6.1.4.1.164.3.1.2.1.21ScalaragnSMaxNoOfCnfgread-onlycurrentMaximum number of configurations that can be defined and stored in the MUX. If the mux has a large capacity, the maximum will be limited to 254.
1.3.6.1.4.1.164.3.1.2.1.22TableagnSCnfgTablenot-accessiblecurrentThis table contains an entry per configuration. It indicates if the configuration is valid.
1.3.6.1.4.1.164.3.1.2.1.22.1RowagnSCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.1.22.1.1ColumnagnSEntryIdxread-onlycurrentUnique number to identify an entry in the configuration table.
1.3.6.1.4.1.164.3.1.2.1.22.1.2ColumnagnSEntryIsValidread-onlycurrentThis attribute indicates whether the specific configuration is valid in the MUX . Value of NO indicates: no such configuration in the MUX.
1.3.6.1.4.1.164.3.1.2.2NodecnfgAgnGen
1.3.6.1.4.1.164.3.1.2.2.1ScalaragnCSanityCheckCmdread-writecurrentSetting this attribute to on(3) will initiate the process of Sanity check on the TmpCnfg. Upon completion the value will automatically be changed to off(2).
1.3.6.1.4.1.164.3.1.2.2.2ScalaragnCSaveCnfgIdxCmdread-writecurrentThis attribute specifies the Id of the target RealCnfg to which the TmpCnfg should be transferred. Upon set command the MUX will initiate the Sanity-Check proc…
1.3.6.1.4.1.164.3.1.2.2.3ScalaragnCLoadCnfgIdxCmdread-writecurrentThis attribute specifies the Id of the source Cnfg to be loaded into the TmpCnfg. Upon set operation the actual transfer will be initiated. The operation is va…
1.3.6.1.4.1.164.3.1.2.2.4TableagnCClkSrcTablenot-accessiblecurrentAll the entries of this table are identical (have the same value) for all the configurations (1..100) except the TmpCnfg. The write operation into the Table Ob…
1.3.6.1.4.1.164.3.1.2.2.4.1RowagnCClkSrcEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.2.4.1.1ColumnagnCClkCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg(1..100) being accessed and Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.1.2.2.4.1.2ColumnagnCClkSrcIdxread-onlycurrentAn index to the table. There are only two entries to this table. Index 1 points to the Master clock parameters and Index 2 points to the Fallback clock paramet…
1.3.6.1.4.1.164.3.1.2.2.4.1.3ColumnagnCClkSrcModeread-writecurrentThe source of the nodal timing.
1.3.6.1.4.1.164.3.1.2.2.4.1.4ColumnagnCClkSrcSltread-writecurrentThis entry is valid only when we are working in rxClk mode. For an invalid entry, the return value will be '7fff'h.
1.3.6.1.4.1.164.3.1.2.2.4.1.5ColumnagnCClkSrcPrtread-writecurrentThis entry is valid only when we are working in rxClk or adaptive mode. For an invalid entry, the return value will be '7fff'h. - For rxClk mode, the values ca…
1.3.6.1.4.1.164.3.1.2.2.5ScalaragnCDeleteCnfgIdxCmdread-writecurrentSetting this attribute will delete the requested DB from the NVRAM .
1.3.6.1.4.1.164.3.1.2.2.6ScalaragnCDefaultCnfgIdxCmdread-writecurrentSetting this attribute will define the desired working configuration when no conditions of the Flip DB Table are fulfilled and no Net GO command was issued. Th…
1.3.6.1.4.1.164.3.1.2.2.7TableagnCnfgDataTablenot-accessiblecurrentThis table contains data about the agent configurations. The table will support only data about valid configurations of the agent.
1.3.6.1.4.1.164.3.1.2.2.7.1RowagnCnfgDataEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.2.7.1.1ColumnagnCnfgIdxread-onlycurrentThis object indicates the Idx of the agent' Cnfg the following objects refer. 255=Temporary Cnfg (Set is done only to this configuration).
1.3.6.1.4.1.164.3.1.2.2.7.1.2ColumnagnCnfgDescread-writecurrentThis object is a description of the Configuration, entered by user, to enhance Cnfg recognition.
1.3.6.1.4.1.164.3.1.2.2.7.1.3ColumnagnCnfgUpdDateread-onlycurrentThis object indicates the date when last update of this configuration was performed, as it is known by the agent using its own real-time clock. The format woul…
1.3.6.1.4.1.164.3.1.2.2.7.1.4ColumnagnCnfgUpdTimeread-onlycurrentThis object indicates the time when last update of this configuration was performed, as it is known by the agent using its own real-time clock. When update is …
1.3.6.1.4.1.164.3.1.2.2.7.1.5ColumnagnCnfgUpdMngerread-onlycurrentThis object indicates the IP Address of the Manager who performed the last update of this configuration. When update is performed, the agent should save the IP…
1.3.6.1.4.1.164.3.1.2.2.8NodeagnCnfgAlarm
1.3.6.1.4.1.164.3.1.2.2.8.1ScalaragnCnfgAlrFilterWindowread-writecurrentWindow of time, in seconds. During this Window, the alarms filter is performed. Same Window for all agent alarms that need filtering. Upon end of the Window, t…
1.3.6.1.4.1.164.3.1.2.2.8.2TableagnCnfgAlrTablenot-accessiblecurrentThis table enables the user to set attributes to each alarm. Setting for a non-existing entry agnCnfgAlrMask, agnCnfgAlrInvert or agnCnfgAlrFilter to 'yes'(or …
1.3.6.1.4.1.164.3.1.2.2.8.2.1RowagnCnfgAlrEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.2.8.2.1.1ColumnagnCnfgAlrCoderead-onlycurrentThe alarm code. The following attributes refer this code.
1.3.6.1.4.1.164.3.1.2.2.8.2.1.2ColumnagnCnfgAlrSlotread-onlycurrentThe alarm slot. The following attributes apply for the alarm code and slot selected. all = the attributes apply to all slots. notApplicable = the selected alar…
1.3.6.1.4.1.164.3.1.2.2.8.2.1.3ColumnagnCnfgAlrPortread-onlycurrentThe alarm port. The following attributes apply for the alarm code,slot and port selected. 200 = all = the attributes apply to all ports of the selected slot. W…
1.3.6.1.4.1.164.3.1.2.2.8.2.1.4ColumnagnCnfgAlrMaskread-writecurrentAn attribute defining the desired Mask state of an alarm . no - unmask (this command is not saved in agent's common database) noAndSave - unmask ; this command…
1.3.6.1.4.1.164.3.1.2.2.8.2.1.5ColumnagnCnfgAlrInvertread-writecurrentAn attribute defining the desired Invert state of an alarm . no - not inverted. yes - inverted. For MP, it is not applicable for alarms that are currently OFF.
1.3.6.1.4.1.164.3.1.2.2.8.2.1.6ColumnagnCnfgAlrFilterread-writecurrentAn attribute defining if Filter is desired for the alarm . no - no filter. yes - filter activate. This filter is activated within a window of time defined by a…
1.3.6.1.4.1.164.3.1.2.2.8.2.1.7ColumnagnCnfgAlrFilterSetread-writecurrentThis is a top threshold causing the alarm that passes it, to be declared Set (ON) at the end of the respective window of time. - For alarms defined by default …
1.3.6.1.4.1.164.3.1.2.2.8.2.1.8ColumnagnCnfgAlrFilterResetread-writecurrentThis is a bottom threshold causing the alarm that does not pass it, to be declared Reset (ON) at the end of the respective window of time. - For alarms defined…
1.3.6.1.4.1.164.3.1.2.2.8.2.1.9ColumnagnCnfgAlrSeverityread-writecurrentAn attribute defining desired severity of an alarm code per slot/port
1.3.6.1.4.1.164.3.1.2.2.8.3TableagnCnfgAlrReportTablenot-accessiblecurrentThis table enables the user to configure the desired Alarm Reports according to alarms severity.
1.3.6.1.4.1.164.3.1.2.2.8.3.1RowagnCnfgAlrReportEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.2.8.3.1.1ColumnagnCnfgAlrReportTyperead-onlycurrentThe alarm report type. trap - traps will be sent only for alarms having the selected On/Off severity or higher. buffer - only alarms having the selected On/Off…
1.3.6.1.4.1.164.3.1.2.2.8.3.1.2ColumnagnCnfgAlrStartReportOnread-writecurrentThis object specifies the severity from which alarms will be reported. Alarms having this severity or higher, will be reported. This object specifies the repor…
1.3.6.1.4.1.164.3.1.2.2.8.3.1.3ColumnagnCnfgAlrStartReportOffread-writecurrentThis object specifies the severity from which alarms will be reported. Alarms having this severity or higher, will be reported. This object specifies the repor…
1.3.6.1.4.1.164.3.1.2.2.9ScalaragnCOffsetCmdread-writecurrentAn object defining special user request. notApplicable - is RO value for products that do not support this object. normal - nothing special u1 - user 1 - for a…
1.3.6.1.4.1.164.3.1.2.2.10TableagnCT1E1RingTablenot-accessiblecurrentConfiguration of all T1/E1 Ring ML cards and ports. The write operation into the table objects is valid only for the TmpCnfg. A Slot/Port that does not partici…
1.3.6.1.4.1.164.3.1.2.2.10.1RowagnCT1E1RingEntrynot-accessiblecurrentAn Entry in table agnCT1E1RingTable
1.3.6.1.4.1.164.3.1.2.2.10.1.1ColumnagnCT1E1RingCnfgIdxread-onlycurrentThis object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.1.2.2.10.1.2ColumnagnCT1E1RingPrimeSlotread-onlycurrentThe slot number of the Primary card of the Ring Pair.
1.3.6.1.4.1.164.3.1.2.2.10.1.3ColumnagnCT1E1RingPrimePortread-onlycurrentThe port number in the Primary Card. For external ports, the value will be as that of the port in the card. Example: external-3 -> 3 external-4 -> 4 For intern…
1.3.6.1.4.1.164.3.1.2.2.10.1.4ColumnagnCT1E1RingSecSlotread-createcurrentThe slot number of the Secondary card of the Ring Pair.
1.3.6.1.4.1.164.3.1.2.2.10.1.5ColumnagnCT1E1RingSecPortread-createcurrentThe port number in the Secondary Card. For external ports, the value will be as that of the port in the card. Example: external-3 -> 3 external-4 -> 4 For inte…
1.3.6.1.4.1.164.3.1.2.2.10.1.6ColumnagnCT1E1RingRecTimeread-createcurrentT1/E1 Ring Recovery Time (sec). Valid Values: 1..99, 65535. 65535=NA.
1.3.6.1.4.1.164.3.1.2.2.10.1.7ColumnagnCT1E1RingRowStatusread-createcurrentThis parameter allows NMS to create/delete entries of this table. The only possible supported RowStatus vaules are active (1) and destroy (6).
1.3.6.1.4.1.164.3.1.2.2.10.1.8ColumnagnCT1E1RingWTRread-createcurrentT1/E1 Ring Wait to Restore (sec). Valid Values: 0..999, 65535. 65535=NA. When the value <> 65535, the value of agnCT1E1RingRecTime must be 65535.
1.3.6.1.4.1.164.3.1.2.2.10.1.9ColumnagnCT1E1RingDualFailDetectionread-createcurrentT1/E1 Ring - Dual Failure Detection enable/disable.
1.3.6.1.4.1.164.3.1.2.2.11ScalaragnCMainExitPortread-writecurrentAn object defining the Main Exit Port for the Data of the device. In the Vmux-120 Device the Data can Exit via one of the 2 existing ports: 1. Ethernet port (2…
1.3.6.1.4.1.164.3.1.2.2.12TableagnCBuMlTablenot-accessiblecurrentConfiguration for Primary, Secondary and Third Link. These are used for Link Backup.
1.3.6.1.4.1.164.3.1.2.2.12.1RowagnCBuMlEntrynot-accessiblecurrentAn Entry in table agnCBuMlTable
1.3.6.1.4.1.164.3.1.2.2.12.1.1ColumnagnCBuMlCnfgIdxnot-accessiblecurrentThis object indicates the Index of the Configuration database (1..255) being accessed. Index of 255 relates to the Temporary Configuration.
1.3.6.1.4.1.164.3.1.2.2.12.1.2ColumnagnCBuMlRolenot-accessiblecurrentThe Role of the Link. Primary Link is the Link that should usually work. If the Primary Link fails, the data will go through the Secondary Link. If both Primar…
1.3.6.1.4.1.164.3.1.2.2.12.1.3ColumnagnCBuMlTyperead-writecurrentThe Type of the Link. For E1/T1 the Link can be Link A - e1T1a or Link B - e1T1b.
1.3.6.1.4.1.164.3.1.2.2.12.1.4ColumnagnCBuMlDefaultGatewayread-writecurrentDefault Gateway's IP Address.
1.3.6.1.4.1.164.3.1.2.2.12.1.5ColumnagnCBuMlSubnetMaskread-writecurrentThe Link subnet mask.
1.3.6.1.4.1.164.3.1.2.2.12.1.6ColumnagnCBuMlOamFrequencyread-writecurrentTime in sec. between 2 OAM packets.
1.3.6.1.4.1.164.3.1.2.2.12.1.7ColumnagnCBuMlOamTimeoutCyclesread-writecurrentNo. of cycles the Link will send OAM packets without receiving a response from the remote Link before switching to the Backup Link.
1.3.6.1.4.1.164.3.1.2.2.12.1.8ColumnagnCBuMlWaitToRestoreread-writecurrentThis object defines traffic recovery time (in milliseconds) of the link after its recovery. This object is applicable only when Recovery Mode is revertive.
1.3.6.1.4.1.164.3.1.2.2.13TableagnCQ50Tablenot-accessiblecurrentTable for the device Q50 parameters. Q50 is a Signaling protocol used between PBX devices. It is possible to control the initiation of calls using Q.50. This i…
1.3.6.1.4.1.164.3.1.2.2.13.1RowagnCQ50Entrynot-accessiblecurrentAn Entry in table agnCQ50Table
1.3.6.1.4.1.164.3.1.2.2.13.1.1ColumnagnCQ50CnfgIdxnot-accessiblecurrentThis object indicates the Index of the Configuration database (1..255) being accessed. Index of 255 relates to the Temporary Configuration.
1.3.6.1.4.1.164.3.1.2.2.13.1.2ColumnagnCQ50StopCallsThreshread-writecurrentThis object indicates the Bandwidth Threshold percent (%) above which new Calls from the PBX will be disabled.
1.3.6.1.4.1.164.3.1.2.2.13.1.3ColumnagnCQ50DiscardPktThreshread-writecurrentThis object indicates the Bandwidth Threshold percent (%) above which voice packets will be discarded. Usually, the value selected should be higher than the va…
1.3.6.1.4.1.164.3.1.2.2.13.1.4ColumnagnCQ50BlockNewModemVbdCallsThreshread-writecurrentThis object indicates the Modem VBD Calls Threshold percent (%) above which new modem calls will be rejected.
1.3.6.1.4.1.164.3.1.2.2.13.1.5ColumnagnCQ50BlockNewModemRelayCallsThreshread-writecurrentThis object indicates the Modem Relay Calls Threshold percent (%) above which new modem calls will be rejected.
1.3.6.1.4.1.164.3.1.2.3NodecmprAgnGen
1.3.6.1.4.1.164.3.1.2.3.1TableagnCmprTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.2.3.1.1RowagnCmprEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.3.1.1.1ColumnagnCmprTypIdxread-onlycurrentThis attribute indicates the Type of the Compressed being referred.
1.3.6.1.4.1.164.3.1.2.3.1.1.2ColumnagnCmprCnfgIdxread-onlycurrentThis attribute indicates the configuration to which the Compressed information is related.
1.3.6.1.4.1.164.3.1.2.3.1.1.3ColumnagnCmprVersionread-onlycurrentThis attribute indicates the version of the internal format of the Compressed data
1.3.6.1.4.1.164.3.1.2.3.1.1.4ColumnagnCmprObjread-writecurrentThis attribute is the compressed information itself.
1.3.6.1.4.1.164.3.1.2.3.2TableagnDlciCmprTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.2.3.2.1RowagnDlciCmprEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.3.2.1.1ColumnagnDlciCmprCnfgIdxread-onlycurrentThis attribute indicates the configuration to which the Compressed information is related.
1.3.6.1.4.1.164.3.1.2.3.2.1.2ColumnagnDlciCmprVersionread-onlycurrentThis attribute indicates the version of the internal format of the Compressed data
1.3.6.1.4.1.164.3.1.2.3.2.1.3ColumnagnDlciCmprDlciIdxread-onlycurrentThis attribute indicates a unique identifier of the Dlci, the compressed information relates to. The values are between 16 - 991.
1.3.6.1.4.1.164.3.1.2.3.2.1.4ColumnagnDlciCmprObjread-writecurrentThis attribute is the compressed information itself.
1.3.6.1.4.1.164.3.1.2.3.3TableagnAlarmsCmprTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.2.3.3.1RowagnAlarmsCmprEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.3.3.1.1ColumnagnAlarmsCmprVersionread-onlycurrentThis attribute indicates the version of the internal format of the Compressed data
1.3.6.1.4.1.164.3.1.2.3.3.1.2ColumnagnAlarmsCmprAlarmIdxread-onlycurrentA unique number to identify an entry in the alarm status table of the agent.
1.3.6.1.4.1.164.3.1.2.3.3.1.3ColumnagnAlarmsCmprObjread-onlycurrentThis attribute is the compressed information itself.
1.3.6.1.4.1.164.3.1.2.3.4TableagnAlrBufCmprTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.2.3.4.1RowagnAlrBufCmprEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.3.4.1.1ColumnagnAlrBufCmprVersionread-onlycurrentThis attribute indicates the version of the internal format of the Compressed data
1.3.6.1.4.1.164.3.1.2.3.4.1.2ColumnagnAlrBufCmprAlarmIdxread-onlycurrentA unique number to identify an entry in the history alarms buffer of the agent.
1.3.6.1.4.1.164.3.1.2.3.4.1.3ColumnagnAlrBufCmprObjread-onlycurrentThis attribute is the compressed information itself.
1.3.6.1.4.1.164.3.1.2.3.5TableagnSCmprErrListTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.2.3.5.1RowagnSCmprErrListEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.3.5.1.1ColumnagnSCmprErrVersionread-onlycurrentThe version of the compressed data
1.3.6.1.4.1.164.3.1.2.3.5.1.2ColumnagnSCmprErrIdxread-onlycurrentUnique number to identify an entry in the errors list table. The maximum entry value cannot exceed the value of 'agnSNoOfSanityCheckErr'.
1.3.6.1.4.1.164.3.1.2.3.5.1.3ColumnagnSCmprErrObjread-onlycurrentThis attribute is a full text description of the error, including: error code, slot and port numbers related to the code .
1.3.6.1.4.1.164.3.1.2.3.6TableagnTsCmprTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.2.3.6.1RowagnTsCmprEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.3.6.1.1ColumnagnTsCmprVerIdxread-onlycurrentThis object indicates the version of the internal format of the Compressed data.
1.3.6.1.4.1.164.3.1.2.3.6.1.2ColumnagnTsCmprCnfgIdxread-onlycurrentThis object indicates the configuration to which the Compressed information is related. 255=temporary configuration. Set can be performed only to the temporary…
1.3.6.1.4.1.164.3.1.2.3.6.1.3ColumnagnTsCmprSlotIdxread-onlycurrentThis object indicates the Slot to which the Compressed information is related. For MP-2100: IO-1..IO-12 = (5).. (16) For DXC-30 : IO-1..IO-15 = (5).. (19). NA=…
1.3.6.1.4.1.164.3.1.2.3.6.1.4ColumnagnTsCmprPortIdxread-onlycurrentThis object indicates the Port within the Slot, to which the Compressed information is related. For Port Index see each product's spec.
1.3.6.1.4.1.164.3.1.2.3.6.1.5ColumnagnTsCmprPduIdxread-onlycurrentThis object indicates the PDU index within the same port. That provides for the case when one PDU is not sufficient for all TS Assignment data of the same port.
1.3.6.1.4.1.164.3.1.2.3.6.1.6ColumnagnTsCmprDataread-writecurrentThis object is the compressed information itself. It provides information about all TSs of a port.
1.3.6.1.4.1.164.3.1.2.3.7TableagnXCmprTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.2.3.7.1RowagnXCmprEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.3.7.1.1ColumnagnXCmprTypIdxread-onlycurrentThis attribute indicates the Type of the Compressed being referred. One of the types is V5.1 Variant data.
1.3.6.1.4.1.164.3.1.2.3.7.1.2ColumnagnXCmprVersionread-onlycurrentThis attribute indicates the version of the internal format of the Compressed data.
1.3.6.1.4.1.164.3.1.2.3.7.1.3ColumnagnXCmprIdx3read-onlycurrent3rd index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant, this attribute indicates the configuration to which the Com…
1.3.6.1.4.1.164.3.1.2.3.7.1.4ColumnagnXCmprIdx4read-onlycurrent4th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates a unique number of the slot positio…
1.3.6.1.4.1.164.3.1.2.3.7.1.5ColumnagnXCmprIdx5read-onlycurrent5th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates a unique identifier of the port the…
1.3.6.1.4.1.164.3.1.2.3.7.1.6ColumnagnXCmprIdx6read-onlycurrent6th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates the Variant index. Valid values are…
1.3.6.1.4.1.164.3.1.2.3.7.1.7ColumnagnXCmprIdx7read-onlycurrent7th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute is not needed. Therefore, its value will be a…
1.3.6.1.4.1.164.3.1.2.3.7.1.8ColumnagnXCmprObjread-writecurrentThis attribute is the compressed information itself.
1.3.6.1.4.1.164.3.1.2.4NodealrBuffGen
1.3.6.1.4.1.164.3.1.2.4.1TablealrBufTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.2.4.1.1RowalrBufEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.4.1.1.1ColumnalrBufIdxread-onlycurrentThis attribute indicates a unique number to identify this entry
1.3.6.1.4.1.164.3.1.2.4.1.1.2ColumnalrBufDescriptionread-onlycurrentThis entry is a unique text description of the alarm in the buffer. The alarm description includes the following information: alarm code, slot id, card type, c…
1.3.6.1.4.1.164.3.1.2.4.1.1.3ColumnalrBufCoderead-onlycurrentA code identifying the alarm of an entry in the alarm buffer table.
1.3.6.1.4.1.164.3.1.2.4.1.1.4ColumnalrBufSlotread-onlycurrentThe slot number this alarm refers to. When the alarm refers to a system alarm, the value will be 'notApplicable(255)'.
1.3.6.1.4.1.164.3.1.2.4.1.1.5ColumnalrBufPortread-onlycurrentThe port number this alarm refers to. If the port number is irrelevant to this alarm (if it is a system/card level alarm) the value will be 9999.
1.3.6.1.4.1.164.3.1.2.4.1.1.6ColumnalrBufSeverityread-onlycurrentThe severity of the alarm.
1.3.6.1.4.1.164.3.1.2.4.1.1.7ColumnalrBufStateread-onlycurrentState of the alarm (On/Off).
1.3.6.1.4.1.164.3.1.2.4.2ScalaralrBufferClearCmdread-writecurrentSetting this attribute to ON, will enforce a clear operation on the Alarms Buffer. Upon completion, the value will automatically change to off(2). For MP-2100/…
1.3.6.1.4.1.164.3.1.2.4.3ScalaralrBufIdxUponLastAckread-onlycurrentThis attribute indicates the value of alrBufIdx for the last existing entry of alrBufTable, when alrBufferClearCmd was last Set to on(3). That will enable a us…
1.3.6.1.4.1.164.3.1.2.5NodeagnFlipDb
1.3.6.1.4.1.164.3.1.2.5.1TableagnCAgendaTablenot-accessiblecurrentThis table devides the week days into categories needed for DB flip consideration.
1.3.6.1.4.1.164.3.1.2.5.1.1RowagnCAgendaEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.5.1.1.1ColumnagnCAgendaCnfgIdxread-onlycurrentActive or Temporary Agenda Table. Both configurations can be read but only the Temporary can be written to.
1.3.6.1.4.1.164.3.1.2.5.1.1.2ColumnagnCAgendaDayIdxread-onlycurrentDay of week
1.3.6.1.4.1.164.3.1.2.5.1.1.3ColumnagnCAgendaDayCategoryread-writecurrentThe Category of the Day
1.3.6.1.4.1.164.3.1.2.5.2TableagnCFlipNetEventsTablenot-accessiblecurrentThis table holds the Net Events the MUX should trace
1.3.6.1.4.1.164.3.1.2.5.2.1RowagnCFlipNetEventsEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.5.2.1.1ColumnagnCFlipNetEventsCnfgIdxread-onlycurrentActive or Temporary Net Events Table. Both configurations can be read but only the Temporary can be written to.
1.3.6.1.4.1.164.3.1.2.5.2.1.2ColumnagnCFlipNetEventIdxread-onlycurrentEntry within the table
1.3.6.1.4.1.164.3.1.2.5.2.1.3ColumnagnCFlipNetEventActiveread-writecurrentIndicates if the entry is valid. In order to Add/Modify parameters of an entry, this object should be set to Yes. In order to delete an entry, this object shou…
1.3.6.1.4.1.164.3.1.2.5.2.1.4ColumnagnCFlipNetEventTyperead-writecurrentThe Net Event type
1.3.6.1.4.1.164.3.1.2.5.2.1.5ColumnagnCFlipNetEventNoread-writecurrentThe Net Event No. (Bit Index)
1.3.6.1.4.1.164.3.1.2.5.2.1.6ColumnagnCFlipNetEventSlotread-writecurrentThe slot to which the net event relates . Not applicable for time event
1.3.6.1.4.1.164.3.1.2.5.2.1.7ColumnagnCFlipNetEventPortread-writecurrentThe port within the relevant slot. Valid values: - extPrt1(1)..exPrt16(16) - notApplicable(100) - inPrt1(101)..inPrt84(184)
1.3.6.1.4.1.164.3.1.2.5.2.1.8ColumnagnCFlipNetEventISDread-writecurrentThe time in seconds since the Net Event was reported as ON until it is considered as ON. Not relevant for time events.
1.3.6.1.4.1.164.3.1.2.5.2.1.9ColumnagnCFlipNetEventOSDread-writecurrentThe time in seconds since the net event was reported as OFF until it is considered as OFF. Not relevant for time events.
1.3.6.1.4.1.164.3.1.2.5.2.1.10ColumnagnCFlipNetEventDayTyperead-writecurrentThe time event relates to all days defined in this category in the agnCAgendaTable. Applicable only for time event
1.3.6.1.4.1.164.3.1.2.5.2.1.11ColumnagnCFlipNetEventStartTimeread-writecurrentThe time event will be activated at this time. The format is hh:mm.
1.3.6.1.4.1.164.3.1.2.5.2.1.12ColumnagnCFlipNetEventEndTimeread-writecurrentThe time event will be deactivated at this time. The format is hh:mm.
1.3.6.1.4.1.164.3.1.2.5.3TableagnCFlipTablenot-accessiblecurrentThe DB Flip Decisions Table
1.3.6.1.4.1.164.3.1.2.5.3.1RowagnCFlipEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.5.3.1.1ColumnagnCFlipCnfgIdxread-onlycurrentActive or Temporary Flip Decisions Table. Both configurations can be read but only the Temporary can be written to.
1.3.6.1.4.1.164.3.1.2.5.3.1.2ColumnagnCFlipIdxread-onlycurrentEntry number within the table
1.3.6.1.4.1.164.3.1.2.5.3.1.3ColumnagnCFlipActiveread-writecurrentIndicates if the entry is valid. In order to Add/Modify parameters of an entry this object should be Set to Yes. In order to delete an entry, this object shoul…
1.3.6.1.4.1.164.3.1.2.5.3.1.4ColumnagnCFlipLogicalExpread-writecurrentA logical expression composed of events numbers (which were configured in the 'AgnCFlipNetEvantsTable') and logical operators ('|', '&', '!', '(', ')') between…
1.3.6.1.4.1.164.3.1.2.5.3.1.5ColumnagnCFlipDbNoread-writecurrentThe ID of the required DB
1.3.6.1.4.1.164.3.1.2.5.3.1.6ColumnagnCFlipDiscardDeread-writecurrentIndicates whether the Mux should start discarding all DE. (MP3000 Only).
1.3.6.1.4.1.164.3.1.2.5.4NodeagnFlipDbControls
1.3.6.1.4.1.164.3.1.2.5.4.1ScalaragnCFlipDbSanityCheckCmdread-writecurrentSetting this attribute to on(3) will initiate the process of Sanity check on the Temp Flip Db and automatically be changed to off(2).
1.3.6.1.4.1.164.3.1.2.5.4.2ScalaragnCSaveFlipDbCmdread-writecurrentSetting this attribute to on(3) will initiate the process of Sanity check on the Temp Flip Db and if it is OK, it will save the Flip Db in the NVRAM, activatin…
1.3.6.1.4.1.164.3.1.2.5.4.3ScalaragnCSaveNetCnfgIdxCmdread-writecurrentThis attribute specifies the Id of the target NVRAM Cnfg to which the TmpCnfg should be transferred. Upon set command the MUX will initiate the Sanity-Check pr…
1.3.6.1.4.1.164.3.1.2.5.4.4ScalaragnCSaveNetFlipDbCmdread-writecurrentSetting this attribute to on(3) will save the Temp Flip DB Into the NVRAM without actual flip.
1.3.6.1.4.1.164.3.1.2.5.4.5ScalaragnCNetGoCmdread-writecurrentSetting this attribute to On will broadcast a 'GO' command to the network. When a Mux receives a 'GO' command it issues a delay for 'agnCNetDelay' seconds and …
1.3.6.1.4.1.164.3.1.2.5.4.6ScalaragnCNetDelayread-writecurrentThis attribute determines the period of time in seconds that takes for a message to be transferred over all the network. After a 'GO' command the MUX issues a …
1.3.6.1.4.1.164.3.1.2.5.4.7ScalaragnCNetEventsBcastread-writecurrentThis object determines if the Net Events will be Broadcasted to other Muxes of the Net or not. disabled - Net Events will NOT be Broadcasted enabled - Net Even…
1.3.6.1.4.1.164.3.1.2.5.4.8ScalaragnCNetEventsBcastIntervalread-writecurrentWhen agnCNetEventsBcast is enabled, this object determines the interval of time in seconds, between two consecutive Net Events transferred over the network. De…
1.3.6.1.4.1.164.3.1.2.6NodeagnSa
1.3.6.1.4.1.164.3.1.2.6.1ScalaragnSaSwchStatusread-onlycurrentThis object indicates the status of the switches on the stand-alone unit. Each switch is represented by a bit. The status is a sum of 2**n, according to the bi…
1.3.6.1.4.1.164.3.1.2.7NodeagnListDecoding
1.3.6.1.4.1.164.3.1.2.7.1TableagnListDecodingTablenot-accessiblecurrentA decoding table . For each type of list, a description is given for each existing code.
1.3.6.1.4.1.164.3.1.2.7.1.1RowagnListDecodingEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.7.1.1.1ColumnagnListDecodingTyperead-onlycurrentThe type of list the decoding data refers to. alr - Alarms list sanity - Sanity Check Error list. counter - Counter type of ifPerfCounterType
1.3.6.1.4.1.164.3.1.2.7.1.1.2ColumnagnListDecodingCoderead-onlycurrentThe specific code for which decoding is needed.
1.3.6.1.4.1.164.3.1.2.7.1.1.3ColumnagnListDecodingDescriptionread-onlycurrentThe description fitting the specific code and type of list required.
1.3.6.1.4.1.164.3.1.2.7.1.1.4ColumnagnListDecodingDefStateread-onlycurrentThis object is applicable only for agnListDecodingType=alr. It reports the default state/severity of each alarm. User can change the severity of the alarms def…
1.3.6.1.4.1.164.3.1.2.7.1.1.5ColumnagnListDecodingSeverityread-writecurrentThis object is applicable only for agnListDecodingType=alr. It enables the user to select a severity for each alarm. The severity is set per alarm code (same f…
1.3.6.1.4.1.164.3.1.2.7.1.1.6ColumnagnListDecodingAcmRelaySltread-writecurrentThis object indicates the ACM slot, desired for outbound relay (report) for the selected alarm. In the ?004 Unit the entries io6(10)..io12(16) are not valid. n…
1.3.6.1.4.1.164.3.1.2.7.1.1.7ColumnagnListDecodingAcmRelayPrtread-writecurrentThis object indicates the ACM port within the slot, desired for outbound relay (report) for the selected alarm. notApplicable - when agnListDecodingType=sanity…
1.3.6.1.4.1.164.3.1.2.8NodeagnSystemDlci
1.3.6.1.4.1.164.3.1.2.8.1TableagnDlciTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.1.2.8.1.1RowagnDlciEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.8.1.1.1ColumnagnDlciCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.1.2.8.1.1.2ColumnagnDlciLSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. This is the Source Slot of the DLCI. vs=Voice Switching In the ?004 Unit the entrie…
1.3.6.1.4.1.164.3.1.2.8.1.1.3ColumnagnDlciLPrtIdxread-onlycurrentThis attribute indicates a unique external or internal port number, including linkSelector or encapsulator. This is the Source Port of the DLCI. 100=noConnect …
1.3.6.1.4.1.164.3.1.2.8.1.1.4ColumnagnDlciLIdxread-onlycurrentThis attribute indicates a unique index for each possible used DLCI(16..991). This is the Source Side of the DLCI. 0=notApplicable (for voice switching) LIdx i…
1.3.6.1.4.1.164.3.1.2.8.1.1.5ColumnagnDlciHSltIdxread-onlycurrentThis attribute indicates a unique slot position In the Mux where the DLCI is routed to - Destination Slot. For ISDN BRI ports of MX300/30 units: io1(5) = isdn1…
1.3.6.1.4.1.164.3.1.2.8.1.1.6ColumnagnDlciHPrtIdxread-onlycurrentThis attribute indicates a unique port number where the DLCI is routed to - Destination Port.
1.3.6.1.4.1.164.3.1.2.8.1.1.7ColumnagnDlciHIdxread-onlycurrentThis attribute indicates a unique internal connection DLCI number where the Source DLCI is routed to - the Destination Side of the DLCI.
1.3.6.1.4.1.164.3.1.2.8.1.1.8ColumnagnDlciTxBcread-createcurrentThis attribute indicates a unique Tx committed bandwidth on the user transmit line or at the port receive line.
1.3.6.1.4.1.164.3.1.2.8.1.1.9ColumnagnDlciTxBeread-createcurrentThis attribute indicates a unique Tx excess bandwidth on the user transmit line or at the port receive line.
1.3.6.1.4.1.164.3.1.2.8.1.1.10ColumnagnDlciRxBcread-createcurrentThis attribute indicates a unique Rx committed bandwidth on the user receive line or at the port transmit line.
1.3.6.1.4.1.164.3.1.2.8.1.1.11ColumnagnDlciRxBeread-createcurrentThis attribute indicates a unique Rx excess bandwidth on the user receive line or at the port transmit line.
1.3.6.1.4.1.164.3.1.2.8.1.1.12ColumnagnDlciPriorityread-createcurrentThis attribute indicates a unique priority of the pcv. 1 is the lowest priority and 7 is the highest priority.
1.3.6.1.4.1.164.3.1.2.8.1.1.13ColumnagnDlciStatusread-onlycurrentThis attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected
1.3.6.1.4.1.164.3.1.2.8.1.1.14ColumnagnDlciSpoofingread-createcurrentThis object refers to sending of RIP messages: - yes : RIP messages will be sent ONLY if there is a change in the Net. - no : RIP messages will be always sent.…
1.3.6.1.4.1.164.3.1.2.8.1.1.15ColumnagnDlciFunnelEnableread-createcurrentThis object selects Funnel activation: - disabled: Funnel operation will be disabled. The agnDlciTxBe and agnDlciTxBc values are not used for funneling. - enab…
1.3.6.1.4.1.164.3.1.2.8.1.1.16ColumnagnDlciRoutingProtocolread-createcurrentThis object is relevant only when one side of the DLCI is a CL-NMS interface. It defines which Routing Protocol will be used for management via CL-NMS port. no…
1.3.6.1.4.1.164.3.1.2.8.1.1.17ColumnagnDlciRowStatusread-createcurrentThis attribute allows to create/delete a row in this table. For creating a row, the NMS should set agnRowStatus.255.id2.id3.id4.id5.id6.id7 = active(1). For de…
1.3.6.1.4.1.164.3.1.2.9NodeagnVoiceSwitching
1.3.6.1.4.1.164.3.1.2.9.1TableagnVoiceSwConfTablenot-accessiblecurrentMXcess Configuration for Voice Switching.
1.3.6.1.4.1.164.3.1.2.9.1.1RowagnVoiceSwConfEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.9.1.1.1ColumnagnVoiceSwConfIdxread-onlycurrentActive or Temporary Table. Both configurations can be read but only the Temporary can be written to.
1.3.6.1.4.1.164.3.1.2.9.1.1.2ColumnagnVoiceSwConfZoneIdread-writecurrent1 or 2 digits, (0-9)(1-9).
1.3.6.1.4.1.164.3.1.2.9.1.1.3ColumnagnVoiceSwConfNodeIdread-writecurrent1, 2 or 3 digits, (1-9),(0-9),(0-9).
1.3.6.1.4.1.164.3.1.2.9.1.1.4ColumnagnVoiceSwConfNoOfHopsread-writecurrentNumber of hops the frame will go through the net before deciding to discard the frame (like time-to-live in IP). 0 = notApplicable Default=20 .
1.3.6.1.4.1.164.3.1.2.9.1.1.5ColumnagnVoiceSwConfSidtread-writecurrentSIDT: Short Inter Digit Timeout used as timer (in sec.) between digits after routing is completed. The timeout indicates end of dialing and the call can then b…
1.3.6.1.4.1.164.3.1.2.9.1.1.6ColumnagnVoiceSwConfLidtread-writecurrentLIDT: Long Inter Digit Timeout used as timer between digits before routing is completed. If no digits were dialed and LIDT expired then the user will get an er…
1.3.6.1.4.1.164.3.1.2.9.1.1.7ColumnagnVoiceSwConfDialPlanread-writecurrentThis is the Dialing Plan method that will be used in the Voice Switching. Static Dialing Plan - Routing is defined by the current device Zone and Node ID in th…
1.3.6.1.4.1.164.3.1.2.9.2TableagnVoiceSwConfRtTablenot-accessiblecurrentRouting Table for Voice Switching.
1.3.6.1.4.1.164.3.1.2.9.2.1RowagnVoiceSwConfRtEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.9.2.1.1ColumnagnVoiceSwConfRtDbIdread-onlycurrentActive or Temporary Table. Both configurations can be read but only the Temporary can be written to.
1.3.6.1.4.1.164.3.1.2.9.2.1.2ColumnagnVoiceSwConfRtIdxread-onlycurrentThe Index of the row.
1.3.6.1.4.1.164.3.1.2.9.2.1.3ColumnagnVoiceSwConfRtDigitsread-createcurrentDialed digits: Series of digits 0...9, '*', '#' or '%'. The '*' and '#' can have many uses according to the user's decision. For example, they can be used as p…
1.3.6.1.4.1.164.3.1.2.9.2.1.4ColumnagnVoiceSwConfRtActionread-createcurrentAction that the system should perform for the digits: agnVoiceSwConfRtDigits. The action that is allowed depends on the Dialing Plan. Here is the list of the a…
1.3.6.1.4.1.164.3.1.2.9.2.1.5ColumnagnVoiceSwConfRtDataread-createcurrentThis field is relevant for actions hgr(6), and rep(8), numDigDP(11) and contains the following information: For hgr - the number of the Hunt Group. For rep - t…
1.3.6.1.4.1.164.3.1.2.9.2.1.6ColumnagnVoiceSwConfRtSlotread-createcurrentRouting Slot- Relevant for actions zone(2), node(3), shortDialing(4), route(12), ext(13).
1.3.6.1.4.1.164.3.1.2.9.2.1.7ColumnagnVoiceSwConfRtPortread-createcurrentRouting Port- Relevant for actions zone(2), node(3), shortDialing(4), route(12), ext(13). 100=noConnect (for non-routing case).
1.3.6.1.4.1.164.3.1.2.9.2.1.8ColumnagnVoiceSwConfRtDlciread-createcurrentRouting DLCI- Relevant for actions zone(2), node(3), shortDialing(4), route(12), ext(13). Valid values: 0=notApplicable (for non-routing case). 1, 16..991
1.3.6.1.4.1.164.3.1.2.9.2.1.9ColumnagnVoiceSwConfRtRowStatusread-createcurrentStatus of the row for creating/deleting entries in the table. The only possible supported RowStatus vaules are active (1), notInService (2), notReady(3), creat…
1.3.6.1.4.1.164.3.1.2.9.2.1.10ColumnagnVoiceSwConfRtMaxCallsread-createcurrentMaximum no. of simultaneous voice calls that are allowed in the direction defined by the current entry. Default=0 (No Limit).
1.3.6.1.4.1.164.3.1.2.9.2.1.11ColumnagnVoiceSwConfRtPriorityread-createcurrentThis attribute indicates a unique priority of the Voice Switching Route. 1 is the lowest priority and 7 is the highest priority. 0 means N/A
1.3.6.1.4.1.164.3.1.2.9.5TableagnVoiceSwConfHGTablenot-accessiblecurrentTable of Hunt Groups.
1.3.6.1.4.1.164.3.1.2.9.5.1RowagnVoiceSwConfHGEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.9.5.1.1ColumnagnVoiceSwConfHGdbIdxread-onlycurrentActive or Temporary Table. Both configurations can be read but only the Temporary can be written to.
1.3.6.1.4.1.164.3.1.2.9.5.1.2ColumnagnVoiceSwConfHGIdxread-onlycurrentFor Vmux-300 devices - This object represents a combination of - Hunt Group number and Extension number OR - Port number and Extension number. For other device…
1.3.6.1.4.1.164.3.1.2.9.5.1.3ColumnagnVoiceSwConfHGConnectread-writecurrentThis attribute indicates whether the hunt group should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.1.2.9.5.1.4ColumnagnVoiceSwConfHGExtread-writecurrentThis is the extension number of the hunt group. 0 is for not valid. The allowed range is 10 - 99.
1.3.6.1.4.1.164.3.1.2.9.5.1.5ColumnagnVoiceSwConfHGExtStringread-writecurrentThis is the extension string of the hunt group. This string is a combination of digits, * and #.
1.3.6.1.4.1.164.3.1.2.9.5.1.6ColumnagnVoiceSwConfHGUserParamsread-writecurrentThis object indicates the User's parameters.
1.3.6.1.4.1.164.3.1.2.9.5.1.7ColumnagnVoiceSwConfHGStatusread-writecurrentThis object enables the user to create/delete entries in this table. Its usage for values (1)..(6) should be identical to RowStatus SYNTAX. notApplicable(255) …
1.3.6.1.4.1.164.3.1.2.10NodeagnSigProfile
1.3.6.1.4.1.164.3.1.2.10.1TableagnSigProfileTablenot-accessiblecurrent- For products supporting more than one configuration, the write operation into the Table is valid only to the TmpCnfg entry. - For products that do not suppor…
1.3.6.1.4.1.164.3.1.2.10.1.1RowagnSigProfileEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.10.1.1.1ColumnagnSigProfileCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. For products supporting more than one configuration,the w…
1.3.6.1.4.1.164.3.1.2.10.1.1.2ColumnagnSigProfileIdxread-onlycurrentThis attribute indicates the Signaling Profile (1..5). For MP-104/204, only Profile=1 will exist.
1.3.6.1.4.1.164.3.1.2.10.1.1.3ColumnagnSigProfileRxTxread-onlycurrentThis attribute indicates if the following objects refer to: Rx or Tx translation. Rx : ML->IO Tx : IO->ML . For MP-104/204, that means: Rx : Signaling to FXS C…
1.3.6.1.4.1.164.3.1.2.10.1.1.4ColumnagnSigProfileABCDread-writecurrentFor MP-2100/MP-2200 and for MP-104/204 from R2: This object represents 6 parameters, by 3 Octets : Busy Code-MSB nibble, - applicable only for Rx translation I…
1.3.6.1.4.1.164.3.1.2.10.2TableagnSigProfTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry. This is the general table of signaling profiles.
1.3.6.1.4.1.164.3.1.2.10.2.1RowagnSigProfEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.10.2.1.1ColumnagnSigProfCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg.
1.3.6.1.4.1.164.3.1.2.10.2.1.2ColumnagnSigProfIdxread-onlycurrentThis attribute indicates the Signaling Profile (1..5).
1.3.6.1.4.1.164.3.1.2.10.2.1.3ColumnagnSigProfNameread-writecurrentProfile Name given by user.
1.3.6.1.4.1.164.3.1.2.10.2.1.4ColumnagnSigProfTyperead-writecurrentProfile Type. legacy - usual signaling. The parameters for the Legacy Profiles are detailed in the agnSigProfileTable, above. r2Cas - R2 signaling. The paramet…
1.3.6.1.4.1.164.3.1.2.11NodeagnSystemTs
1.3.6.1.4.1.164.3.1.2.12NodesystemVoice
1.3.6.1.4.1.164.3.1.2.12.1TablesystemVoiceTablenot-accessiblecurrentGeneral Parameters for voice - system level.
1.3.6.1.4.1.164.3.1.2.12.1.1RowsystemVoiceEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.2.12.1.1.1ColumnsystemVoiceConfIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed - Active or Temporary Configurations. Idx 255 relates to the temporary TmpCnfg. All config…
1.3.6.1.4.1.164.3.1.2.12.1.1.2ColumnsystemVoiceNationalToneread-writecurrentTone Characteristics (Amplitude, Frequency, delays etc.). These characteristics are defined according to the country.
1.3.6.1.4.1.164.3.1.2.12.1.1.3ColumnsystemVoicePacketRateread-writecurrentThis object indicates the G.729 and G.711 Coders transmitted Packet Rate in milliseconds.
1.3.6.1.4.1.164.3.1.2.12.1.1.4ColumnsystemVoiceFaxSupportread-writecurrentThis object allows the user to Disable/Enable Fax support.
1.3.6.1.4.1.164.3.1.2.12.1.1.5ColumnsystemVoiceFaxRateread-writecurrentThis object indicates the Fax Rate limit. It is irrelevant when Fax support is NA or disabled.
1.3.6.1.4.1.164.3.1.2.12.1.1.6ColumnsystemVoiceModemSupportread-writecurrentThis object allows the user to Disable/Enable Modem support.
1.3.6.1.4.1.164.3.1.2.12.1.1.7ColumnsystemVoiceCoderAndRateread-writecurrentThis object indicates the Coder and Rate for the Voice Compression.
1.3.6.1.4.1.164.3.1.2.12.1.1.8ColumnsystemVoiceEchoCancelerread-writecurrentThis object indicates the Echo Canceler activation.
1.3.6.1.4.1.164.3.1.2.12.1.1.9ColumnsystemVoiceTxGainread-writecurrentThis object indicates the Transmit Gain (volume) in dB.
1.3.6.1.4.1.164.3.1.2.12.1.1.10ColumnsystemVoiceDtmfRelayMethodread-writecurrentThis object indicates the DTMF Relay Method that is used to transmit DTMF tones. rfc2833(1) - inband DTMF relay according to RFC-2833. sipInfo(2) - out of band…
1.3.6.1.4.1.164.3.1.2.12.1.1.11ColumnsystemVoiceDtmfRelayRxPayloadTyperead-writecurrentThis object indicates the Rx Payload Type for DTMF relay RTP packets. It is relevant only when DTMF Relay Method is RFC-2833.
1.3.6.1.4.1.164.3.1.2.12.1.1.12ColumnsystemVoiceDtmfRelayPayloadTypeNegread-writecurrentThis object indicates whether Payload Type Negotiation is used (according to RFC-2833) or not. It is relevant only when DTMF Relay Method is RFC-2833.
1.3.6.1.4.1.164.3.1.2.12.1.1.13ColumnsystemVoiceDtmfRelayTxPayloadTyperead-writecurrentThis object indicates the Tx Payload Type for DTMF relay RTP packets. It is relevant only when the Payload Type Negotiation is disabled.
1.3.6.1.4.1.164.3.1.2.12.2TablesystemVoiceCoderTablenot-accessiblecurrentVoice Coders table.
1.3.6.1.4.1.164.3.1.2.12.2.1RowsystemVoiceCoderEntrynot-accessiblecurrentAn entry in Voice Coders table.
1.3.6.1.4.1.164.3.1.2.12.2.1.1ColumnsystemVoiceCoderConfIdxnot-accessiblecurrentThe first index of the table. This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with m…
1.3.6.1.4.1.164.3.1.2.12.2.1.2ColumnsystemVoiceCoderPrioritynot-accessiblecurrentThis object indicates the Coder's Priority.
1.3.6.1.4.1.164.3.1.2.12.2.1.3ColumnsystemVoiceCoderCoderAndRateread-writecurrentThis object indicates the Coder and Rate for the Voice Compression.
1.3.6.1.4.1.164.3.1.3NodemdlWanGen
1.3.6.1.4.1.164.3.1.3.1NodestatMdlGen
1.3.6.1.4.1.164.3.1.3.1.1TablemdlSInstTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.3.1.1.1RowmdlSInstEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.3.1.1.1.1ColumnmdlSInstSltIdxread-onlycurrentA unique number to identify a slot position in the mux. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid. For the Vmux2100 Main Board c…
1.3.6.1.4.1.164.3.1.3.1.1.1.2ColumnmdlSInstCardTyperead-onlycurrentThis attribute indicates the type of card installed in the specific slot position. Only PS cards are possible in the PS slots. Only CL cards are possible in th…
1.3.6.1.4.1.164.3.1.3.1.1.1.3ColumnmdlSHwVersionread-onlycurrentThis attribute indicates the Hardware version of the installed card in the specific slot position.
1.3.6.1.4.1.164.3.1.3.1.1.1.4ColumnmdlSSwVersionread-onlycurrentThis attribute indicates the Software version of the installed card in the specific slot position.
1.3.6.1.4.1.164.3.1.3.1.1.1.5ColumnmdlSAlrStatusread-onlycurrentIndicates the alarm state at module level, i.e. lower level (port alarms) status is not included. This attribute will be set to: critical(7) - when there is at…
1.3.6.1.4.1.164.3.1.3.1.1.1.6ColumnmdlSAlrStatusAllread-onlycurrentIndicates the alarm state in the module-all level, i.e. lower level (port alarms) included. This attribute will be set to: critical(7) - when there is at least…
1.3.6.1.4.1.164.3.1.3.1.1.1.7ColumnmdlSMaskedAlrStatread-onlycurrentIndicates the alarm state at module level, [i.e. lower level (port alarms) status is not included],including Masked alarms. This attribute will be set to: crit…
1.3.6.1.4.1.164.3.1.3.1.1.1.8ColumnmdlSMaskedAlrStatAllread-onlycurrentIndicates the alarm state in the module-all level, i.e. lower level (port alarms) included, including Masked alarms. This attribute will be set to: critical(7)…
1.3.6.1.4.1.164.3.1.3.1.1.1.9ColumnmdlSTstStatusAllread-onlycurrentThis attribute will be set to on(3) when there is at least one test in progress on a channel of the card, otherwise the value will be off(2).
1.3.6.1.4.1.164.3.1.3.1.1.1.10ColumnmdlSClearAlrCmdread-writecurrentSetting this command to ON, enforces a clear of all the alarms in the given slot, excluding alarms of port level. The clear operation will not be applied for m…
1.3.6.1.4.1.164.3.1.3.1.1.1.11ColumnmdlSClearAllAlrCmdread-writecurrentSetting this command to ON, enforces a clear of all the alarms in the given slot, including all its ports alarms. The clear operation will not be applied for m…
1.3.6.1.4.1.164.3.1.3.1.1.1.12ColumnmdlSTemperatureread-onlycurrentTemperature of the card, in Celsius degrees.
1.3.6.1.4.1.164.3.1.3.1.2TablemdlSAlrTablenot-accessiblecurrentThe list of card agent alarms ; includes also an alarm indicating existence of alarms on its ports if there are any.
1.3.6.1.4.1.164.3.1.3.1.2.1RowmdlSAlrEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.3.1.2.1.1ColumnmdlSAlrIdxread-onlycurrentA unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecuti…
1.3.6.1.4.1.164.3.1.3.1.2.1.2ColumnmdlSAlrSltIdxread-onlycurrentThis attribute indicates the desired slot position. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io12(16) are not valid. For the Vmux2100 Main Board clA…
1.3.6.1.4.1.164.3.1.3.1.2.1.3ColumnmdlSAlrCodeDescriptionread-onlycurrentThis attribute is a full text description of the alarm . The alarm description includes the following information: alarm code, alarm text, alarm severity, Mask…
1.3.6.1.4.1.164.3.1.3.1.2.1.4ColumnmdlSAlrCoderead-onlycurrentA code identifying the alarm of an entry in the alarm status table at card level.
1.3.6.1.4.1.164.3.1.3.1.2.1.5ColumnmdlSAlrSeverityread-onlycurrentThe severity of the alarm.
1.3.6.1.4.1.164.3.1.3.1.2.1.6ColumnmdlSAlrStateread-onlycurrentState of the alarm.
1.3.6.1.4.1.164.3.1.3.1.2.1.7ColumnmdlSAlrCounterread-onlycurrentA counter - how many times the alarm occured since last clear operation. ON and OFF Alarm will be counted separately.
1.3.6.1.4.1.164.3.1.3.1.2.1.8ColumnmdlSAlrMaskread-onlycurrentAlarm mask : on/off.
1.3.6.1.4.1.164.3.1.3.1.2.1.9ColumnmdlSAlrInvertread-onlycurrentAlarm invert : on/off.
1.3.6.1.4.1.164.3.1.3.2NodecnfgMdlGen
1.3.6.1.4.1.164.3.1.3.2.1TablemdlCPrgTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.3.2.1.1RowmdlCPrgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.3.2.1.1.1ColumnmdlCCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg(1..100) being referred. Value 255 specifies the TmpCnfg
1.3.6.1.4.1.164.3.1.3.2.1.1.2ColumnmdlCSltIdxread-onlycurrentThis attribute indicates a unique number of the slot position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not va…
1.3.6.1.4.1.164.3.1.3.2.1.1.3ColumnmdlCPrgCardTyperead-writecurrentThis attribute indicates the type of card assigned to the specific slot in the common configuration. This object is identical in all the configurations (1..100…
1.3.6.1.4.1.164.3.1.3.2.1.1.4ColumnmdlCNoOfExternPrtread-onlycurrentNumber of external ports in the programmed card of the specific slot position
1.3.6.1.4.1.164.3.1.3.2.1.1.5ColumnmdlCNoOfInternPrtread-onlycurrentNumber of internal ports in the programmed card of the specific slot position.
1.3.6.1.4.1.164.3.1.3.2.1.1.6ColumnmdlCWorkModeread-writecurrentWorking mode of the card. The user may configure the card to work in a stand alone mode or integrated with the device. Example for use in MHS-IP cards: - stand…
1.3.6.1.4.1.164.3.1.3.2.1.1.7ColumnmdlCDhcpClientEnableread-writecurrentEnable/Disable the feature of DHCP Client for the selected card.
1.3.6.1.4.1.164.3.1.3.2.1.1.8ColumnmdlCRdnExistsread-onlycurrentThis object indicates whether any port of the programmed card is configured to be part of a Redundancy/APS pair. If at least one port of the programmed card is…
1.3.6.1.4.1.164.3.1.3.2.1.1.9ColumnmdlCInterfacesread-onlycurrentOctet string which indicates 'present' interfaces in card. Each '0' bit stands for non-present interface. Each '1' bit stands for present interface. For ASMi54…
1.3.6.1.4.1.164.3.1.3.3NodecmprMdlGen
1.3.6.1.4.1.164.3.1.3.3.1TablemdlCmprTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.3.3.1.1RowmdlCmprEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.3.3.1.1.1ColumnmdlCmprTypIdxread-onlycurrentThis attribute indicates the Type of the Compressed being referred.
1.3.6.1.4.1.164.3.1.3.3.1.1.2ColumnmdlCmprCnfgIdxread-onlycurrentThis attribute indicates the configuration to which the Compressed information is related.
1.3.6.1.4.1.164.3.1.3.3.1.1.3ColumnmdlCmprVersionread-onlycurrentThis attribute indicates the version of the internal format of the Compressed data
1.3.6.1.4.1.164.3.1.3.3.1.1.4ColumnmdlCmprSltIdxread-onlycurrentThis attribute indicates a unique number of the slot position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not va…
1.3.6.1.4.1.164.3.1.3.3.1.1.5ColumnmdlCmprObjread-writecurrentThis attribute is the compressed information itself.
1.3.6.1.4.1.164.3.1.3.3.2TablemdlAlarmsCmprTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.3.3.2.1RowmdlAlarmsCmprEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.3.3.2.1.1ColumnmdlAlarmsCmprVersionread-onlycurrentThis attribute indicates the version of the internal format of the Compressed data
1.3.6.1.4.1.164.3.1.3.3.2.1.2ColumnmdlAlarmsCmprAlarmSlotread-onlycurrentThis attribute indicates the desired slot position. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid.
1.3.6.1.4.1.164.3.1.3.3.2.1.3ColumnmdlAlarmsCmprAlarmIdxread-onlycurrentA unique number to identify an entry in the alarm status table of the agent.
1.3.6.1.4.1.164.3.1.3.3.2.1.4ColumnmdlAlarmsCmprObjread-writecurrentThis attribute is the compressed information itself.
1.3.6.1.4.1.164.3.1.4NodeprtWanGen
1.3.6.1.4.1.164.3.1.4.1NodestatPrtGen
1.3.6.1.4.1.164.3.1.4.1.1TableprtSInstTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.4.1.1.1RowprtSInstEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.4.1.1.1.1ColumnprtSInstSltIdxread-onlycurrentThis attribute indicates a unique number to identify the slot where the card is inserted. In the ?004 Unit the entries io6(10)..io(16) are not valid. For the V…
1.3.6.1.4.1.164.3.1.4.1.1.1.2ColumnprtSInstPrtIdxread-onlycurrentThis attribute indicates a unique number to identify a port in a specific card. The valid ports depend on the installed card: the valid external ports (interfa…
1.3.6.1.4.1.164.3.1.4.1.1.1.3ColumnprtSInstPrtTyperead-onlycurrentThis attribute describes the type of the designated port. In MX 3000 only external & internal options are used. All the other options are only for MX 30/300 wh…
1.3.6.1.4.1.164.3.1.4.1.1.1.4ColumnprtSInstIfIndexread-onlycurrentThis attribute indicates the unique interface number assigned to the port. The specific interface of this attribute is the same as the interface identified by …
1.3.6.1.4.1.164.3.1.4.1.1.1.5ColumnprtSActiveStatusread-onlycurrentThis attribute describes the activity status of the port. unknown(1) indicates that the information is not supported. notUsed(2) indicates that the ch is not c…
1.3.6.1.4.1.164.3.1.4.1.1.1.6ColumnprtSAlrStatusread-onlycurrentIndicates the alarm state in the port(ch) agent level. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm…
1.3.6.1.4.1.164.3.1.4.1.1.1.7ColumnprtSMaskedAlrStatread-onlycurrentIndicates the alarm state in the port(ch) agent level, including Masked alarms. This attribute will be set to: critical(7) - when there is at least one active …
1.3.6.1.4.1.164.3.1.4.1.1.1.8ColumnprtSClearAlrCmdread-writecurrentSetting this attribute to on(3) enforces a clear operation of the alarm status events in the given port. The clear operation will not be applied for masked/inv…
1.3.6.1.4.1.164.3.1.4.1.1.1.9ColumnprtSTestMaskread-onlycurrentThis is a mask which indicates which tests from the 'prtSTstCmd' list are allowed for the requested port. If a specific test is allowed, its respective bit wil…
1.3.6.1.4.1.164.3.1.4.1.1.1.10ColumnprtSTstCmdread-writecurrentSetting this attribute to any of the above values will initiate a test on the specific port if the operation is legal. If the operation is not legal, the mux w…
1.3.6.1.4.1.164.3.1.4.1.1.1.11ColumnprtSTstDurationread-writecurrentThis attribute indicates the maximum duration of executing a test on the specific port. This entry applies to all the test operations. The resolution will be a…
1.3.6.1.4.1.164.3.1.4.1.1.1.12ColumnprtSBertClrCmdread-writecurrentSetting this attribute initiates bert count clear operation. It is valid only when bert test is active on the specific port.
1.3.6.1.4.1.164.3.1.4.1.1.1.13ColumnprtSBertTstRsltread-onlycurrentThis attribute indicates the number of Bit Error Rate indicated during the BERT operation. It is valid only when bert test is active on the specific port.
1.3.6.1.4.1.164.3.1.4.1.1.1.14ColumnprtSInterfaceTyperead-onlycurrentThis attribute indicates a unique HW interface type of the selected port.
1.3.6.1.4.1.164.3.1.4.1.1.1.15ColumnprtSParamStatusread-onlycurrentThis object indicates Status of parameters specific to the selected port. - For a port that has no special status or is supported by prtSExHsfStatTable - 1 Oct…
1.3.6.1.4.1.164.3.1.4.1.1.1.16ColumnprtSTestMaskXpread-writecurrentThis is an Expanded test mask of the prtSTestMask object. The prtSTestMask object reached its maximum, being an Integer with 32 bits. This object indicates whi…
1.3.6.1.4.1.164.3.1.4.1.1.1.17ColumnprtSRdnStatusread-onlycurrentRedundancy Status of this port. noRdn - this port is not part of a Redundancy pair/group. offline - this port is offline from Redundancy point of view. online …
1.3.6.1.4.1.164.3.1.4.1.2TableprtSAlrTablenot-accessiblecurrentThe list of port agent alarms.
1.3.6.1.4.1.164.3.1.4.1.2.1RowprtSAlrEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.4.1.2.1.1ColumnprtSAlrIdxread-onlycurrentA unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecuti…
1.3.6.1.4.1.164.3.1.4.1.2.1.2ColumnprtSAlrSltIdxread-onlycurrentThis attribute indicates a unique identifier of the slot where the card is inserted. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io12(16) are not valid…
1.3.6.1.4.1.164.3.1.4.1.2.1.3ColumnprtSAlrPrtIdxread-onlycurrentThis attribute indicates a unique identifier of the port the alarm applies to. All the values are valid. No alarms exist for a port which does not exist. Valid…
1.3.6.1.4.1.164.3.1.4.1.2.1.4ColumnprtSAlrCodeDescriptionread-onlycurrentThis attribute is a full text description of the alarm. The alarm description includes the following information: alarm code, alarm text, alarm severity, Maske…
1.3.6.1.4.1.164.3.1.4.1.2.1.5ColumnprtSAlrCoderead-onlycurrentA code identifying the alarm of an entry in the alarm status table at port level.
1.3.6.1.4.1.164.3.1.4.1.2.1.6ColumnprtSAlrSeverityread-onlycurrentThe severity of the alarm.
1.3.6.1.4.1.164.3.1.4.1.2.1.7ColumnprtSAlrStateread-onlycurrentState of the alarm.
1.3.6.1.4.1.164.3.1.4.1.2.1.8ColumnprtSAlrCounterread-onlycurrentA counter - how many times the alarm occured since last clear operation. ON and OFF Alarm will be counted separately.
1.3.6.1.4.1.164.3.1.4.1.2.1.9ColumnprtSAlrMaskread-onlycurrentAlarm mask : on/off.
1.3.6.1.4.1.164.3.1.4.1.2.1.10ColumnprtSAlrInvertread-onlycurrentAlarm invert : on/off.
1.3.6.1.4.1.164.3.1.4.1.2.1.11ColumnprtSAlrCardTyperead-onlycurrentThis attribute indicates the type of card installed in the specific slot position. The enumeration is according to mdlSInstCardType.
1.3.6.1.4.1.164.3.1.4.1.3NodestatisPrtGen
1.3.6.1.4.1.164.3.1.4.1.3.1NodeprtFrStatis
1.3.6.1.4.1.164.3.1.4.1.3.1.1TableprtFrStatisTablenot-accessiblecurrentThis table is applicable only for an active port running an FR protocol .
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1RowprtFrStatisEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.1ColumnprtFrStatisSltIdxread-onlycurrentThis attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For stand-alone uni…
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.2ColumnprtFrStatisPrtIdxread-onlycurrentThis attribute indicates a unique port number.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.3ColumnprtFrStatisInvIdxread-onlycurrentThe Interval of 15 min. for which the following statistics counters are applicable.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.4ColumnprtFrTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the current error-measurement interval. This object is applicable mainly for the current interva…
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.5ColumnprtFrRxTotalFramesread-onlycurrentThe total number of frames received by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.6ColumnprtFrTxTotalFramesread-onlycurrentThe total number of frames sent by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.7ColumnprtFrRxTotalBytesread-onlycurrentThe total number of bytes received by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.8ColumnprtFrTxTotalBytesread-onlycurrentThe total number of bytes sent by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.9ColumnprtFrRxMngFramesread-onlycurrentThe management number of frames received by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.10ColumnprtFrTxMngFramesread-onlycurrentThe management number of frames sent by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.11ColumnprtFrRxDeFramesread-onlycurrentThe number of De frames received by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.12ColumnprtFrTxDeFramesread-onlycurrentThe number of De frames sent by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.13ColumnprtFrRxDcrdCongDeFrread-onlycurrentThe number of De frames discarded due to congestion, received by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.14ColumnprtFrTxDcrdCongDeFrread-onlycurrentThe number of De frames discarded due to congestion, sent by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.15ColumnprtFrRxDcrdCongAllFrread-onlycurrentAll the frames discarded due to congestion, received by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.16ColumnprtFrTxDcrdCongAllFrread-onlycurrentAll the frames discarded due to congestion, sent by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.17ColumnprtFrRxFecnread-onlycurrentNumber of frames received by this port during the selected interval, indicating forward congestion.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.18ColumnprtFrTxFecnread-onlycurrentNumber of frames sent by this port during the selected interval, indicating forward congestion.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.19ColumnprtFrRxBecnread-onlycurrentNumber of frames received by this port during the selected interval, indicating backward congestion.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.20ColumnprtFrTxBecnread-onlycurrentNumber of frames sent by this port during the selected interval, indicating backward congestion.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.21ColumnprtFrRxBeViolread-onlycurrentNumber of data frames received by this port during the selected interval, exceeding the Burst Excess value.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.22ColumnprtFrTxBeViolread-onlycurrentNumber of data frames sent by this port during the selected interval, exceeding the Burst Excess value.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.23ColumnprtFrRxBcViolread-onlycurrentNumber of data frames received by this port during the selected interval, exceeding the Burst Committed value.
1.3.6.1.4.1.164.3.1.4.1.3.1.1.1.24ColumnprtFrTxBcViolread-onlycurrentNumber of data frames sent by this port during the selected interval, exceeding the Burst Committed value.
1.3.6.1.4.1.164.3.1.4.1.3.2NodeprtCrStatis
1.3.6.1.4.1.164.3.1.4.1.3.2.1TableprtCrStatisTablenot-accessiblecurrentThis table is applicable only for an active port running a CR protocol .
1.3.6.1.4.1.164.3.1.4.1.3.2.1.1RowprtCrStatisEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.1ColumnprtCrStatisSltIdxread-onlycurrentThis attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For stand-alone uni…
1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.2ColumnprtCrStatisPrtIdxread-onlycurrentThis attribute indicates a unique port number.
1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.3ColumnprtCrStatisInvIdxread-onlycurrentThe Interval of 15 min. for which the following statistics counters are applicable.
1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.4ColumnprtCrTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the current error-measurement interval. This object is applicable mainly for the current interva…
1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.5ColumnprtCrRxTotalCellsread-onlycurrentThe total number of cells received by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.6ColumnprtCrTxTotalCellsread-onlycurrentThe total number of cells sent by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.7ColumnprtCrRxDataCellsread-onlycurrentThe number of Data Cells received by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.2.1.1.8ColumnprtCrTxDataCellsread-onlycurrentThe number of Data Cells sent by this port during the selected interval.
1.3.6.1.4.1.164.3.1.4.1.3.3NodeprtDlciStatis
1.3.6.1.4.1.164.3.1.4.1.3.3.1TableprtDlciStatisTablenot-accessiblecurrentThis table is applicable only for an active port running an FR, FR+ or CR protocol, with valid DLCIs .
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1RowprtDlciStatisEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.1ColumnprtDlciSltIdxread-onlycurrentThis attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For stand-alone uni…
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.2ColumnprtDlciPrtIdxread-onlycurrentThis attribute indicates a unique port number.
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.3ColumnprtDlciIdxread-onlycurrentThis attribute indicates a unique DLCI index for each valid DLCI (16..991).
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.4ColumnprtDlciRxDeFramesread-onlycurrentThe number of De frames received by this DLCI.
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.5ColumnprtDlciTxDeFramesread-onlycurrentThe number of De frames sent by this DLCI.
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.6ColumnprtDlciRxDcrdCongDeFrread-onlycurrentThe number of De frames discarded due to congestion, received by this DLCI.
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.7ColumnprtDlciTxDcrdCongDeFrread-onlycurrentThe number of De frames discarded due to congestion, sent by this DLCI.
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.8ColumnprtDlciRxDcrdCongAllFrread-onlycurrentAll the frames discarded due to congestion, received by this DLCI.
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.9ColumnprtDlciTxDcrdCongAllFrread-onlycurrentAll the frames discarded due to congestion, sent by this DLCI.
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.10ColumnprtDlciTxFecnread-onlycurrentNumber of frames sent by this DLCI, indicating forward congestion.
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.11ColumnprtDlciTxBecnread-onlycurrentNumber of frames sent by this DLCI, indicating backward congestion.
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.12ColumnprtDlciRxBeViolread-onlycurrentNumber of data frames received by this DLCI, exceeding the Burst Excess value.
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.13ColumnprtDlciTxBeViolread-onlycurrentNumber of data frames sent by this DLCI, exceeding the Burst Excess value.
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.14ColumnprtDlciRxBcViolread-onlycurrentNumber of data frames received by this DLCI, exceeding the Burst Committed value.
1.3.6.1.4.1.164.3.1.4.1.3.3.1.1.15ColumnprtDlciTxBcViolread-onlycurrentNumber of data frames sent by this DLCI, exceeding the Burst Committed value.
1.3.6.1.4.1.164.3.1.4.1.3.4NodeprtT1Statis
1.3.6.1.4.1.164.3.1.4.1.3.4.1TableprtT1FdlMsgTablenot-accessiblecurrentThis table is applicable for a T1 interface with 'esf' LineType .
1.3.6.1.4.1.164.3.1.4.1.3.4.1.1RowprtT1FdlMsgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.1ColumnprtT1FdlMsgSltIdxread-onlycurrentThis attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.
1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.2ColumnprtT1FdlMsgPrtIdxread-onlycurrentThis attribute indicates a unique port number. MTML-1/T1 modules have just one external interface.
1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.3ColumnprtT1FdlMsgFdlTxRxread-onlycurrentThe Fdl tx/rx reference of the Fdl message.
1.3.6.1.4.1.164.3.1.4.1.3.4.1.1.4ColumnprtT1FdlMsgread-onlycurrentFDL message.
1.3.6.1.4.1.164.3.1.4.2NodecnfgPrtGen
1.3.6.1.4.1.164.3.1.4.2.1TableprtExTsSplitTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry, except prtExTsBitTest that will be written directly to the Active Configuration.
1.3.6.1.4.1.164.3.1.4.2.1.1RowprtExTsSplitEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.4.2.1.1.1ColumnprtExTsCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.1.4.2.1.1.2ColumnprtExTsSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. notApplicable - for s…
1.3.6.1.4.1.164.3.1.4.2.1.1.3ColumnprtExTsPrtIdxread-onlycurrentThis attribute indicates a unique port number. Most ML cards have only one external interface. inPrt1 - for MTML-H/E1 cards. For other products' index see thei…
1.3.6.1.4.1.164.3.1.4.2.1.1.4ColumnprtExTsIdxread-onlycurrentThis attribute indicates a unique time slot position. The valid time slots are: 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines, time slot 16 i…
1.3.6.1.4.1.164.3.1.4.2.1.1.5ColumnprtExTsBitread-onlycurrentThis attribute indicates a unique Bit within the time slot. The valid Bits are: 1..8. 255=NA.
1.3.6.1.4.1.164.3.1.4.2.1.1.6ColumnprtExTsIConSlotread-writecurrentThis attribute indicates whether the specified time slot is connected/routed internally in the Agent and to which card it is connected. In the ?004 Unit the en…
1.3.6.1.4.1.164.3.1.4.2.1.1.7ColumnprtExTsIConPrtread-writecurrentThis attribute indicates the internally (In Mux) connected/routed port. For other products' index see their specification.
1.3.6.1.4.1.164.3.1.4.2.1.1.8ColumnprtExTsBitTestread-writecurrentThis attribute indicates a test to be activated on the selected Bit. It is applicable only when prtExPh1MlTsTest=split(254). none - no test is applied for the …
1.3.6.1.4.1.164.3.1.4.2.1.1.9ColumnprtExTsTxSignalingread-onlycurrentLink - Tx Signaling per TS, for TSs having TS Type=Voice (agnTsType=voice(2)). It monitors what is sent to Link for the selected TS, for A,B,C,D Signaling Bits…
1.3.6.1.4.1.164.3.1.4.2.1.1.10ColumnprtExTsRxSignalingread-onlycurrentLink - Rx Signaling per TS, for TSs having TS Type=Voice (agnTsType=voice(2)). It monitors what is received from Link for the selected TS, for A,B,C,D Signalin…
1.3.6.1.4.1.164.3.1.4.2.1.1.11ColumnprtExTsTxIoSignalingread-onlycurrentIO - Tx Signaling per TS, for TSs having TS Type=Voice (agnTsType=voice(2)). It monitors what is sent to IO port for the selected TS, for A,B,C,D Signaling Bit…
1.3.6.1.4.1.164.3.1.4.2.1.1.12ColumnprtExTsRxIoSignalingread-onlycurrentIO - Rx Signaling per TS, for TSs having TS Type=Voice (agnTsType=voice(2)). It monitors what is received from IO port for the selected TS, for A,B,C,D Signali…
1.3.6.1.4.1.164.3.1.4.2.2NodeprtCnfgAgenda
1.3.6.1.4.1.164.3.1.4.2.2.1TableprtAgendaBehaviourTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.1.4.2.2.1.1RowprtAgendaBehaviourEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.4.2.2.1.1.1ColumnprtAgendaBehaviourCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.1.4.2.2.1.1.2ColumnprtAgendaBehaviourSltIdxread-onlycurrentThis parameter should be: - slot number for MX3000 - 255 = N/A for MX300/30.
1.3.6.1.4.1.164.3.1.4.2.2.1.1.3ColumnprtAgendaBehaviourPrtIdxread-onlycurrentThis parameter should be: - port number for MX300/30 - 100 = N/A for MX3000.
1.3.6.1.4.1.164.3.1.4.2.2.1.1.4ColumnprtAgendaBehaviourOnOffread-writecurrentSetting this command to on(3) enables the agenda function at module (3000) or port (300/30) level.
1.3.6.1.4.1.164.3.1.4.2.2.2TableprtCnfgAgendaTablenot-accessiblecurrentThis table allows the user to schedule the time a session is active per week basis.
1.3.6.1.4.1.164.3.1.4.2.2.2.1RowprtCnfgAgendaEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.4.2.2.2.1.1ColumnprtCnfgAgendaCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.1.4.2.2.2.1.2ColumnprtCnfgAgendaSltIdxread-onlycurrentThis attribute is equal to: -slot number for MX3000 -255 = N/A for MX300/30
1.3.6.1.4.1.164.3.1.4.2.2.2.1.3ColumnprtCnfgAgendaPrtIdxread-onlycurrentThis attribute is equal to: - port number for MX300/30 - port number for MX3000. For example 1-4 in MHS-4 cards. - 100 = N/A for MX3000 when not used.
1.3.6.1.4.1.164.3.1.4.2.2.2.1.4ColumnprtCnfgAgendaDayIdxread-onlycurrentThis attribute for which day of the week this row applies.
1.3.6.1.4.1.164.3.1.4.2.2.2.1.5ColumnprtCnfgAgendaSesIdread-onlycurrentThe user may define 4 different active intervals per day.
1.3.6.1.4.1.164.3.1.4.2.2.2.1.6ColumnprtCnfgAgendaFromread-writecurrentStart from time interval in seconds.
1.3.6.1.4.1.164.3.1.4.2.2.2.1.7ColumnprtCnfgAgendaToread-writecurrentTo time interval in seconds.
1.3.6.1.4.1.164.3.1.4.2.3TableprtGenCnfgTablenot-accessiblecurrentThis table allows the user to configure general port parameters.
1.3.6.1.4.1.164.3.1.4.2.3.1RowprtGenCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.4.2.3.1.1ColumnprtGenCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg.
1.3.6.1.4.1.164.3.1.4.2.3.1.2ColumnprtGenCnfgSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted.
1.3.6.1.4.1.164.3.1.4.2.3.1.3ColumnprtGenCnfgPrtIdxread-onlycurrentThis attribute indicates a unique external or internal port number. For MP: exPrt1 (1) .. exPrt16 (16) , notApplicable(100), inPrt1 (101) .. inPrt84 (184)
1.3.6.1.4.1.164.3.1.4.2.3.1.4ColumnprtGenCnfgLinkToSlotread-writecurrentThis attribute indicates the slot of the ML card to which the IO port is mapped.
1.3.6.1.4.1.164.3.1.4.2.3.1.5ColumnprtGenCnfgLinkToPortread-writecurrentThis attribute indicates the port in the prtGenCnfgLinkToSlot of the ML card to which the IO port is mapped. For MP: exPrt1 (1) , exPrt2 (2) , exPrt3 (3) , exP…
1.3.6.1.4.1.164.3.1.4.2.3.1.6ColumnprtGenCnfgPortIdread-writecurrentIO Port Id for V5.1 use. This object is applicable only for part of the PSTN and ISDN IO ports. Generally, 0 is a valid value. Nevertheless, for ports that do …
1.3.6.1.4.1.164.3.1.4.2.3.1.7ColumnprtGenCnfgBusConnectionread-writecurrentThis object indicates the support of the card regarding Bus Connection. Same value for all ports of the card. partial = 2 Buses (AB) full = 4 Buses (ABCD) part…
1.3.6.1.4.1.164.3.1.4.2.3.1.8ColumnprtGenCnfgInbandMngread-writecurrentThis object indicates whether Inband Management is used over the link.
1.3.6.1.4.1.164.3.1.4.2.3.1.9ColumnprtGenCnfgInbandMngRoutProtread-writecurrentThis object indicates the Inband Mng Routing Protocol of the port.
1.3.6.1.4.1.164.3.1.4.2.3.1.10ColumnprtGenCnfgProtectionModeread-writecurrentThis object indicates the Protection Mode of the port. notApplicable- when Bus Protection Point=No. For VC-4/Omni card this object is supported RO.
1.3.6.1.4.1.164.3.1.4.2.3.1.11ColumnprtGenCnfgConnectread-writecurrentThis object indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.1.4.2.3.1.12ColumnprtGenCnfgSignalingTyperead-writecurrentThis object selects the Type of Signaling used by the port.
1.3.6.1.4.1.164.3.1.4.3NodecmprPrtGen
1.3.6.1.4.1.164.3.1.4.3.1TableprtCmprTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.4.3.1.1RowprtCmprEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.4.3.1.1.1ColumnprtCmprTypIdxread-onlycurrentThis attribute indicates the Type of the Compressed being referred.
1.3.6.1.4.1.164.3.1.4.3.1.1.2ColumnprtCmprCnfgIdxread-onlycurrentThis attribute indicates the configuration to which the Compressed information is related.
1.3.6.1.4.1.164.3.1.4.3.1.1.3ColumnprtCmprVersionread-onlycurrentThis attribute indicates the version of the internal format of the Compressed data
1.3.6.1.4.1.164.3.1.4.3.1.1.4ColumnprtCmprSltIdxread-onlycurrentThis attribute indicates a unique number of the slot position where the card is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not va…
1.3.6.1.4.1.164.3.1.4.3.1.1.5ColumnprtCmprPrtIdxread-onlycurrentThis attribute indicates a unique identifier of the port the compressed information relates to. Valid values: exPrt1 (1) .. exPrt16 (16) , inPrt1 (101) .. inPr…
1.3.6.1.4.1.164.3.1.4.3.1.1.6ColumnprtCmprObjread-writecurrentThis attribute is the compressed information itself.
1.3.6.1.4.1.164.3.1.4.3.1.1.7ColumnprtCmprStatisticObjread-onlycurrentThis attribute is the compressed statistics information itself.
1.3.6.1.4.1.164.3.1.4.3.2TableprtDlciCmprTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.4.3.2.1RowprtDlciCmprEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.4.3.2.1.1ColumnprtDlciCmprCnfgIdxread-onlycurrentThis attribute indicates the configuration to which the Compressed information is related.
1.3.6.1.4.1.164.3.1.4.3.2.1.2ColumnprtDlciCmprVersionread-onlycurrentThis attribute indicates the version of the internal format of the Compressed data
1.3.6.1.4.1.164.3.1.4.3.2.1.3ColumnprtDlciCmprSltIdxread-onlycurrentThis attribute indicates a unique number of the slot position where the module is inserted. In the ?004 Unit the entries psB(2),clB(4),io6(10)..io(16) are not …
1.3.6.1.4.1.164.3.1.4.3.2.1.4ColumnprtDlciCmprPrtIdxread-onlycurrentThis attribute indicates a unique identifier of the port the compressed information relates to. All the values are valid.
1.3.6.1.4.1.164.3.1.4.3.2.1.5ColumnprtDlciCmprDlciIdxread-onlycurrentThis attribute indicates a unique identifier of the Dlci the compressed information relates to. The values are between 16 - 991.
1.3.6.1.4.1.164.3.1.4.3.2.1.6ColumnprtDlciCmprObjread-writecurrentThis attribute is the compressed information itself.
1.3.6.1.4.1.164.3.1.4.3.3TableprtAlarmsCmprTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.4.3.3.1RowprtAlarmsCmprEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.4.3.3.1.1ColumnprtAlarmsCmprVersionread-onlycurrentThis attribute indicates the version of the internal format of the Compressed data
1.3.6.1.4.1.164.3.1.4.3.3.1.2ColumnprtAlarmsCmprAlarmSlotread-onlycurrentThis attribute indicates the desired slot position. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid. For Stand-alone units, notApplica…
1.3.6.1.4.1.164.3.1.4.3.3.1.3ColumnprtAlarmsCmprAlarmPortread-onlycurrentThis attribute indicates a unique identifier of the port the alarm applies to. All the values are valid. No alarms exist for a non-existing port. IP Bundles ar…
1.3.6.1.4.1.164.3.1.4.3.3.1.4ColumnprtAlarmsCmprAlarmIdxread-onlycurrentA unique number to identify an entry in the alarm status table of the agent.
1.3.6.1.4.1.164.3.1.4.3.3.1.5ColumnprtAlarmsCmprObjread-onlycurrentThis attribute is the compressed information itself.
1.3.6.1.4.1.164.3.1.5NodemapWanGen
1.3.6.1.4.1.164.3.1.5.1TableagnLinkMapTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.5.1.1RowagnLinkMapEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.5.1.1.1ColumnmapLinkIdread-onlycurrentA unique identifier of the link
1.3.6.1.4.1.164.3.1.5.1.1.2ColumnmapLinkSltIdxread-writecurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries clA(3), io6(10)..io12(16) are not valid.
1.3.6.1.4.1.164.3.1.5.1.1.3ColumnmapLinkPrtIdxread-writecurrentThis attribute indicates a unique port number.
1.3.6.1.4.1.164.3.1.5.1.1.4ColumnmapLinkStatusread-onlycurrentThis attribute indicates the status of the link between the two muxes
1.3.6.1.4.1.164.3.1.6NodediverseIfWanGen
1.3.6.1.4.1.164.3.1.6.1NodeethIf
1.3.6.1.4.1.164.3.1.6.1.1TableethIfTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.6.1.1.1RowethIfEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.6.1.1.1.1ColumnethIfIdxread-onlycurrentA unique index of the ethernet interface/port.
1.3.6.1.4.1.164.3.1.6.1.1.1.2ColumnethModeread-writecurrentThis object indicates the Ethernet mode of operation.
1.3.6.1.4.1.164.3.1.6.1.1.1.3ColumnethBridgingModeread-writecurrentThis object indicates the bridging mode of the Ethernet interface.
1.3.6.1.4.1.164.3.1.6.1.1.1.4ColumnethEncapsulationCRCModeread-writecurrentThis object define the encapsulation type requested for the Ethernet interface. It indicates if we transfer the Ethernet frame to the other side with or withou…
1.3.6.1.4.1.164.3.1.6.1.1.1.5ColumnethBackPressureread-writecurrentThis parameter defines whether to enable or disable Back pressure. Back Pressure is a flow control parameter.
1.3.6.1.4.1.164.3.1.6.1.1.1.6ColumnethLimit4read-writecurrentThis parameter determine the Back off algorithm mode. Every 4 following collisions the Framer will be thrown out (4 times more than usuall).
1.3.6.1.4.1.164.3.1.6.1.1.1.7ColumnethSkipInitResetread-writecurrentThis parameter defines whether read status on reset.
1.3.6.1.4.1.164.3.1.6.1.1.1.8ColumnethMulticastBlockread-writecurrentThis parameter defines whether to send multicast message to WAN from LAN or not.
1.3.6.1.4.1.164.3.1.6.1.1.1.9ColumnethBroadcastBlockread-writecurrentThis parameter defines whether to send broadcast message to WAN from LAN or not.
1.3.6.1.4.1.164.3.1.6.1.1.1.10ColumnethSpeedread-writecurrentThis parameter defines the line speed.
1.3.6.1.4.1.164.3.1.6.1.1.1.11ColumnethRip2read-writecurrentThis parameter defines whether to send RIP II message to WAN from LAN or not
1.3.6.1.4.1.164.3.1.6.1.1.1.12ColumnethPortPriorityread-writecurrentThis parameter defines if priority is to be considered for this Port.
1.3.6.1.4.1.164.3.1.6.1.1.1.13ColumnethPortMngEnableread-writecurrentThis parameter defines whether management data can pass through this Port. localOnly (4) - Only local device can be managed via this port.
1.3.6.1.4.1.164.3.1.6.1.1.1.14ColumnethFlowCtrlMacAddressread-writecurrentIn case of flow control - transmit frame with this specific MAC address to inform the other end to stop sending frames. Default: 01.80.C2.00.00.01.
1.3.6.1.4.1.164.3.1.6.1.1.1.15ColumnethRateLimitread-writecurrentThis parameter defines the Rate Limit of the line, in Mbps.
1.3.6.1.4.1.164.3.1.6.1.1.1.16ColumnethJumboFrameEnableread-writecurrentThis parameter defines whether to support Jumbo Frame or not.
1.3.6.1.4.1.164.3.1.6.1.1.1.17ColumnethAutoMdiXEnableread-writecurrentThis parameter defines whether to support automatic change between MDI and MDI[X].
1.3.6.1.4.1.164.3.1.6.1.1.1.18ColumnethPortDataEnableread-writecurrentThis parameter defines whether this port is enabled for data (that is not management). no(2) - management can run on this port yes(3) - both management and pay…
1.3.6.1.4.1.164.3.1.6.1.1.1.19ColumnethIfUseread-writecurrentThis parameter defines the use of the port. 1=NET 2=USER .
1.3.6.1.4.1.164.3.1.6.1.1.1.20ColumnethLineOamread-writecurrentThis parameter defines the working mode of 802.AH OAM mechanism.
1.3.6.1.4.1.164.3.1.6.1.1.1.21ColumnethRoutingProtocolread-writecurrentThis parameter defines the routing protocol used above ETH port.
1.3.6.1.4.1.164.3.1.6.1.1.1.22ColumnethMdiXManualSwitchread-writecurrentThis parameter sets the port to be MDI-X (cross-over) or MDI (straight-through). It is applicable only when ethAutoMdiXEnable = no, namely, only when the autom…
1.3.6.1.4.1.164.3.1.6.1.1.1.23ColumnethDot1xEnableread-writecurrentDetermines if the Port-Based Network Access Protocol (IEEE-802.1x) is enabled for the Ethernet Port.
1.3.6.1.4.1.164.3.1.6.1.1.1.24ColumnethPartnerRateModeread-writecurrentFor converters having couples of ports, where each couple contains a port with an SFP connector and a port with a RJ connector, this parameter is relevant for …
1.3.6.1.4.1.164.3.1.6.1.1.1.25ColumnethDot1xPortRoleread-writecurrentDetermine the functionality of the port in the Port-Based Network Access Protocol (IEEE-802.1x) - either Authenticator or Supplicant.
1.3.6.1.4.1.164.3.1.6.1.2NodeethIfPerformance
1.3.6.1.4.1.164.3.1.6.1.2.1TableethIfCurrentTablenot-accessiblecurrentThe Ethernet Current table. When the index specifies the Ethernet interface (only), the counters are for an interval of 15 minutes.
1.3.6.1.4.1.164.3.1.6.1.2.1.1RowethIfCurrentEntrynot-accessiblecurrentAn entry in the Ethernet Current table.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.1ColumnethIfCurrentIndexread-onlycurrentThe index of the Ethernet interface. It may be ifIndex. For some devices (e.g RICi-622GE), supporting several types of intervals, this index will be a concaten…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.2ColumnethIfCurrentStatusread-onlycurrentThe status of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was p…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.3ColumnethIfCurrentInFramesread-onlycurrentThe counter associated with the number of received frames, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.4ColumnethIfCurrentInOctetsread-onlycurrentThe counter associated with the number of received octets, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.5ColumnethIfCurrentAlignmentErrorsread-onlycurrentThe counter associated with the number of received frames, which are not complete (The result of dividing the number of bits by 8 is not an Integer), encounter…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.6ColumnethIfCurrentFCSErrorsread-onlycurrentThe counter associated with the number of received frames that didn't pass the FCS test, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.7ColumnethIfCurrentLengthErrorread-onlycurrentThe counter associated with the number of received frames with length error, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.8ColumnethIfCurrentOutFramesread-onlycurrentThe counter associated with the number of transmitted frames, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.9ColumnethIfCurrentOutOctetsread-onlycurrentThe counter associated with the number of transmitted octets, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.10ColumnethIfCurrentSingleCollisionFramesread-onlycurrentThe counter associated with the number of successfully transmitted frames for which transmission was inhibited by exactly one collision, encountered by the Eth…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.11ColumnethIfCurrentMultipleCollisionFramesread-onlycurrentThe counter associated with the number of successfully transmitted frames for which transmission was inhibited by more than one collision, encountered by the E…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.12ColumnethIfCurrentDeferredTransmissionsread-onlycurrentThe counter associated with the number of transmitted frames for which the first transmission attempt was delayed due to a busy media, encountered by the Ether…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.13ColumnethIfCurrentLateCollisionsread-onlycurrentThe counter associated with the number of times that a collision was detected later than the first 64 bytes of the frame, encountered by the Ethernet interface…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.14ColumnethIfCurrentCarrierSenseErrorsread-onlycurrentThe counter associated with the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame, encountered by…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.15ColumnethIfCurrentInputCongestionDroppedread-onlycurrentThe counter associated with the number of frames dropped due to lack of buffers in ingress pool, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.16ColumnethIfCurrentOutputCongestionDroppedread-onlycurrentThe counter associated with the number of dropped frames due to a congestion, encountered by the Transmit direction to the Ethernet interface in the current in…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.17ColumnethIfCurrentOverflowInFramesread-onlycurrentThe number of times the associated ethIfCurrentInFrames counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.18ColumnethIfCurrentOverflowInOctetsread-onlycurrentThe number of times the associated ethIfCurrentInOctets counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.19ColumnethIfCurrentOverflowFCSErrorsread-onlycurrentThe number of times the associated ethIfCurrentFCSErrors counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.20ColumnethIfCurrentOverflowOutFramesread-onlycurrentThe number of times the associated ethIfCurrentOutFrames counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.21ColumnethIfCurrentOverflowOutOctetsread-onlycurrentThe number of times the associated ethIfCurrentOutOctets counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.22ColumnethIfCurrentOverflowMultipleCollisionFramesread-onlycurrentThe number of times the associated ethIfCurrentMultipleCollisionFrames counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.23ColumnethIfCurrentInUnicastFramesread-onlycurrentThe number of received Unicast frames, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.24ColumnethIfCurrentOutUnicastFramesread-onlycurrentThe number of transmitted Unicast frames, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.25ColumnethIfCurrentInMulticastFramesread-onlycurrentThe number of received Multicast frames, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.26ColumnethIfCurrentOutMulticastFramesread-onlycurrentThe number of transmitted Multicast frames, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.27ColumnethIfCurrentInBroadcastFramesread-onlycurrentThe number of received Broadcast frames, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.28ColumnethIfCurrentOutBroadcastFramesread-onlycurrentThe number of transmitted Broadcast frames, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.29ColumnethIfCurrentInDiscardFramesread-onlycurrentThe number of received Discarded frames, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.30ColumnethIfCurrentOutDiscardFramesread-onlycurrentThe number of transmitted Discarded frames, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.31ColumnethIfCurrentInPauseFramesread-onlycurrentThe number of received Pause frames, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.32ColumnethIfCurrentOutPauseFramesread-onlycurrentThe number of transmitted Pause frames, encountered by the Ethernet interface in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.33ColumnethIfCurrentOverflowInUnicastFramesread-onlycurrentThe number of times the associated ethIfCurrentInUnicastFrames counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.34ColumnethIfCurrentOverflowOutUnicastFramesread-onlycurrentThe number of times the associated ethIfCurrentOutUnicastFrames counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.35ColumnethIfCurrentOverflowInMulticastFramesread-onlycurrentThe number of times the associated ethIfCurrentInMulticastFrames counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.36ColumnethIfCurrentOverflowOutMulticastFramesread-onlycurrentThe number of times the associated ethIfCurrentOutMulticastFrames counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.37ColumnethIfCurrentOverflowInBroadcastFramesread-onlycurrentThe number of times the associated ethIfCurrentInBroadcastFrames counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.38ColumnethIfCurrentOverflowOutBroadcastFramesread-onlycurrentThe number of times the associated ethIfCurrentOutBroadcastFrames counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.39ColumnethIfCurrentOverflowInDiscardFramesread-onlycurrentThe number of times the associated ethIfCurrentInDiscardFrames counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.40ColumnethIfCurrentOverflowOutDiscardFramesread-onlycurrentThe number of times the associated ethIfCurrentOutDiscardFrames counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.41ColumnethIfCurrentOverflowInPauseFramesread-onlycurrentThe number of times the associated ethIfCurrentInPauseFrames counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.42ColumnethIfCurrentOverflowOutPauseFramesread-onlycurrentThe number of times the associated ethIfCurrentOutPauseFrames counter has overflowed in the current interval.
1.3.6.1.4.1.164.3.1.6.1.2.2TableethIfIntervalTablenot-accessiblecurrentThe Ethernet Interval table. When ethIfIntervalIndex specifies the Ethernet interface (only), the counters are for an interval of 15 minutes.
1.3.6.1.4.1.164.3.1.6.1.2.2.1RowethIfIntervalEntrynot-accessiblecurrentAn entry in the Ethernet Interval table.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.1ColumnethIfIntervalIndexread-onlycurrentThe index of the Ethernet interface. It may be ifIndex. For some devices (e.g RICi-622GE), supporting several types of intervals, this index will be a concaten…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.2ColumnethIfIntervalNumberread-onlycurrentThe Interval Number. This number is between 1 and x, where 1 is the most recently completed interval and x is the least recently completed interval. For 15 min…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.3ColumnethIfIntervalStatusread-onlycurrentThe status of the interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was partialy …
1.3.6.1.4.1.164.3.1.6.1.2.2.1.4ColumnethIfIntervalInFramesread-onlycurrentThe counter associated with the number of received frames, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.5ColumnethIfIntervalInOctetsread-onlycurrentThe counter associated with the number of received octets, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.6ColumnethIfIntervalAlignmentErrorsread-onlycurrentThe counter associated with the number of received frames, which are not complete (The result of dividing the number of bits by 8 is not an Integer), encounter…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.7ColumnethIfIntervalFCSErrorsread-onlycurrentThe counter associated with the number of received frames that didn't pass the FCS test, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.8ColumnethIfIntervalLengthErrorread-onlycurrentThe counter associated with the number of received frames with length error, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.9ColumnethIfIntervalOutFramesread-onlycurrentThe counter associated with the number of transmitted frames, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.10ColumnethIfIntervalOutOctetsread-onlycurrentThe counter associated with the number of transmitted octets, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.11ColumnethIfIntervalSingleCollisionFramesread-onlycurrentThe counter associated with the number of successfully transmitted frames for which transmission was inhibited by exactly one collision, encountered by the Eth…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.12ColumnethIfIntervalMultipleCollisionFramesread-onlycurrentThe counter associated with the number of successfully transmitted frames for which transmission was inhibited by more than one collision, encountered by the E…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.13ColumnethIfIntervalDeferredTransmissionsread-onlycurrentThe counter associated with the number of transmitted frames for which the first transmission attempt was delayed due to a busy media, encountered by the Ether…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.14ColumnethIfIntervalLateCollisionsread-onlycurrentThe counter associated with the number of times that a collision was detected later than the first 64 bytes of the frame, encountered by the Ethernet interface…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.15ColumnethIfIntervalCarrierSenseErrorsread-onlycurrentThe counter associated with the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame, encountered by…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.16ColumnethIfIntervalInputCongestionDroppedread-onlycurrentThe counter associated with the number of dropped frames due to a congestion, encountered by the Receive direction to the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.17ColumnethIfIntervalOutputCongestionDroppedread-onlycurrentThe counter associated with the number of dropped frames due to a congestion, encountered by the Transmit direction to the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.18ColumnethIfIntervalOverflowInFramesread-onlycurrentThe number of times the associated ethIfIntervalInFrames counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.19ColumnethIfIntervalOverflowInOctetsread-onlycurrentThe number of times the associated ethIfIntervalInOctets counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.20ColumnethIfIntervalOverflowFCSErrorsread-onlycurrentThe number of times the associated ethIfIntervalFCSErrors counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.21ColumnethIfIntervalOverflowOutFramesread-onlycurrentThe number of times the associated ethIfIntervalOutFrames counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.22ColumnethIfIntervalOverflowOutOctetsread-onlycurrentThe number of times the associated ethIfIntervalOutOctets counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.23ColumnethIfIntervalOverflowMultipleCollisionFramesread-onlycurrentThe number of times the associated ethIfIntervalMultipleCollisionFrames counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.24ColumnethIfIntervalInUnicastFramesread-onlycurrentThe number of received Unicast frames, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.25ColumnethIfIntervalOutUnicastFramesread-onlycurrentThe number of transmitted Unicast frames, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.26ColumnethIfIntervalInMulticastFramesread-onlycurrentThe number of received Multicast frames, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.27ColumnethIfIntervalOutMulticastFramesread-onlycurrentThe number of transmitted Multicast frames, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.28ColumnethIfIntervalInBroadcastFramesread-onlycurrentThe number of received Broadcast frames, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.29ColumnethIfIntervalOutBroadcastFramesread-onlycurrentThe number of transmitted Broadcast frames, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.30ColumnethIfIntervalInDiscardFramesread-onlycurrentThe number of received Discarded frames, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.31ColumnethIfIntervalOutDiscardFramesread-onlycurrentThe number of transmitted Discarded frames, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.32ColumnethIfIntervalInPauseFramesread-onlycurrentThe number of received Pause frames, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.33ColumnethIfIntervalOutPauseFramesread-onlycurrentThe number of transmitted Pause frames, encountered by the Ethernet interface in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.34ColumnethIfIntervalOverflowInUnicastFramesread-onlycurrentThe number of times the associated ethIfIntervalInUnicastFrames counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.35ColumnethIfIntervalOverflowOutUnicastFramesread-onlycurrentThe number of times the associated ethIfIntervalOutUnicastFrames counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.36ColumnethIfIntervalOverflowInMulticastFramesread-onlycurrentThe number of times the associated ethIfIntervalInMulticastFrames counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.37ColumnethIfIntervalOverflowOutMulticastFramesread-onlycurrentThe number of times the associated ethIfIntervalOutMulticastFrames counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.38ColumnethIfIntervalOverflowInBroadcastFramesread-onlycurrentThe number of times the associated ethIfIntervalInBroadcastFrames counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.39ColumnethIfIntervalOverflowOutBroadcastFramesread-onlycurrentThe number of times the associated ethIfIntervalOutBroadcastFrames counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.40ColumnethIfIntervalOverflowInDiscardFramesread-onlycurrentThe number of times the associated ethIfIntervalInDiscardFrames counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.41ColumnethIfIntervalOverflowOutDiscardFramesread-onlycurrentThe number of times the associated ethIfIntervalOutDiscardFrames counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.42ColumnethIfIntervalOverflowInPauseFramesread-onlycurrentThe number of times the associated ethIfIntervalInPauseFrames counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.43ColumnethIfIntervalOverflowOutPauseFramesread-onlycurrentThe number of times the associated ethIfIntervalOutPauseFrames counter has overflowed in the interval.
1.3.6.1.4.1.164.3.1.6.1.2.3ScalarethPerformanceModeread-writecurrentThis object indicates whether OK or Fail statistics will be counted.
1.3.6.1.4.1.164.3.1.6.1.2.4TableethIfPerfTablenot-accessiblecurrentThe Ethernet Performance table.
1.3.6.1.4.1.164.3.1.6.1.2.4.1RowethIfPerfEntrynot-accessiblecurrentAn entry in the Ethernet Performance table.
1.3.6.1.4.1.164.3.1.6.1.2.4.1.1ColumnethIfPerfInOkFramesread-onlycurrentThe counter associated with the number of received OK frames, encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Statis…
1.3.6.1.4.1.164.3.1.6.1.2.4.1.2ColumnethIfPerfOutOkFramesread-onlycurrentThe counter associated with the number of transmitted OK frames, encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Sta…
1.3.6.1.4.1.164.3.1.6.1.2.4.1.3ColumnethIfPerfTotalCollisionsread-onlycurrentThe counter associated with the total number of collisions of any type encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Res…
1.3.6.1.4.1.164.3.1.6.1.2.4.1.4ColumnethIfPerfInOkOctetsread-onlycurrentThe counter associated with the number of received OK Octets, encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Statis…
1.3.6.1.4.1.164.3.1.6.1.3NodeethIfOamCfm
1.3.6.1.4.1.164.3.1.6.1.3.0NodeethIfOamCfmEvents
1.3.6.1.4.1.164.3.1.6.1.3.0.1NotificationethOamCfmDefectConditioncurrentThis trap indicates that a MEP has a persistent defect condition.
1.3.6.1.4.1.164.3.1.6.1.3.1TableradMepTablenot-accessiblecurrentMEG End Point (MEP) configuration table associated with Maitenance Entity Group (MEG) End Point. MEP is a short name for an expanded ETH flow point that includ…
1.3.6.1.4.1.164.3.1.6.1.3.1.1RowradMepEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.1ColumnradOamIdx1not-accessiblecurrentThis object may indicate the Bridge Index or Configuration index.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.2ColumnradOamEvcIdxnot-accessiblecurrentThis object indicates the Index of the EVC (Ethernet Virtual Circuit) that the MEP is associated to.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.3ColumnradMepIdxnot-accessiblecurrentThis object indicates the ID of the MEP being accessed.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.4ColumnradMepRowStatusread-createcurrentThis attribute allows to create/delete a row in this table.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.5ColumnradMepLocalMepIdread-createcurrentThis object indicates the local MEP ID.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.6ColumnradMepRemoteMepIdread-createcurrentThis atribute is currently implemneted at radMepCcTable, that supports multicast.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.7ColumnradMepOamModeread-createcurrentThis object determines the OAM mode of the MEP: disabled - no CC is initiated nor responded initiate - the device initiates and responds to CC react - the devi…
1.3.6.1.4.1.164.3.1.6.1.3.1.1.8ColumnradMepContinuityVerModeread-createcurrentThis object determines the OAM behavior of the MEP: disabled - no CC is done cc_based - CC is done based on incoming messages lb_based - CC is done based on lo…
1.3.6.1.4.1.164.3.1.6.1.3.1.1.9ColumnradMepMeLevelread-createcurrentAt any point in a network, ME Level is used to distinguish between OAM signals belonging to different nested MEs. Maintenance Entity Levels are defined as foll…
1.3.6.1.4.1.164.3.1.6.1.3.1.1.10ColumnradMepOamDestAddrTyperead-createcurrentThis object determines if the OAM messages are sent to user defined unicast address, or to RAD proprietary multicast address.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.11ColumnradMepOamDestMacAddrread-createcurrentThis object determines the MAC address that OAM packets are sent to.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.12ColumnradMepDefaultPriorityread-createcurrentThis object defines the priority of the OAM messages sent when no service is defined on EVC. If a service is defined, the OAM messages will get the highest ser…
1.3.6.1.4.1.164.3.1.6.1.3.1.1.13ColumnradMepCcStatusread-onlycurrentThis object indicates the Continuity Check (CC) status.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.14ColumnradMepOamProtocolread-createcurrentDetermines whether to use proprietary OAM mechanism, or to use the standard (IEEE 802.1ag, ITU-T Y.1731).
1.3.6.1.4.1.164.3.1.6.1.3.1.1.15ColumnradMepMdIdread-createcurrentThe index of the Maintenance Domain in the radMdTable (radMdIndex).
1.3.6.1.4.1.164.3.1.6.1.3.1.1.16ColumnradMepMaFormatread-createcurrentThe type (and thereby format) of the Maintenance Association Name.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.17ColumnradMepMaNameread-createcurrentThe Short Maintenance Association name.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.18ColumnradMepSpVlanIdread-createcurrentThe SP (Service Provider) VLAN used when sending an OAM message.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.19ColumnradMepCcIntervalread-createcurrentIndicates the interval at which CCMs are sent by a MEP Valid only if radMepOamMode = initiate(4).
1.3.6.1.4.1.164.3.1.6.1.3.1.1.20ColumnradMepTransmitLbmDestMacAddressread-createcurrentThe Target MAC Address Field to be transmitted in the Loopback Message: For unicast MAC Address this is the unicast destination MAC address. For multicast MAC …
1.3.6.1.4.1.164.3.1.6.1.3.1.1.21ColumnradMepTransmitLbmDestMepIdread-createcurrentThe MEPID of another MEP in the same MA to which the LBM is to be sent. This address will be used if the value of radMepTransmitLbmDestIsMepId is yes (3). 802.…
1.3.6.1.4.1.164.3.1.6.1.3.1.1.22ColumnradMepTransmitLbmDestIsMepIdread-createcurrentyes (3) indicates that MEPID of the target MEP is used for loopback transmission. no (2) indicates that unicast destination MAC address of the target MEP is us…
1.3.6.1.4.1.164.3.1.6.1.3.1.1.23ColumnradMepTransmitLbmMassagesread-createcurrentThe number of Loopback messages to be transmitted.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.24ColumnradMepTransmitLbmVlanPriorityread-createcurrentThe priority to be used in the VLAN tag, if present, in the transmitted frame. The default value is CCM priority. 802.1ag clause 12.14.7.3.2:e
1.3.6.1.4.1.164.3.1.6.1.3.1.1.25ColumnradMepTransmitLbmVlanDropEnableread-createcurrentDrop Enable bit to be used in the VLAN tag, if present, in the transmitted frame. 802.1ag clause 12.14.7.3.2:e
1.3.6.1.4.1.164.3.1.6.1.3.1.1.26ColumnradMepLbrInread-onlycurrentTotal number of valid, in-order Loopback Replies received.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.27ColumnradMepLbrInOutOfOrderread-onlycurrentThe total number of valid, out-of-order Loopback Replies received.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.28ColumnradMepLbmOutread-onlycurrentTotal number of Loopback Messages transmitted.
1.3.6.1.4.1.164.3.1.6.1.3.1.1.29ColumnradMepTransmitLtmTargetMacAddressread-createcurrentThe Target MAC Address Field to be transmitted in the Link Trace Message: A unicast destination MAC address. This address will be used if the value of radMepTr…
1.3.6.1.4.1.164.3.1.6.1.3.1.1.30ColumnradMepTransmitLtmTargetMepIdread-createcurrentThe MEPID of another MEP in the same MA to which LTM is to be transmitted. This address will be used if the value of radMepTransmitLtmTargetIsMepId is yes (3).…
1.3.6.1.4.1.164.3.1.6.1.3.1.1.31ColumnradMepTransmitLtmTargetIsMepIdread-createcurrentyes (3) indicates that MEPID of the target MEP is used for Linktrace transmission. no (2) indicates that unicast destination MAC address of the target MEP is u…
1.3.6.1.4.1.164.3.1.6.1.3.1.1.32ColumnradMepTransmitLtmTtlread-createcurrentThe LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 each Linktrace Res…
1.3.6.1.4.1.164.3.1.6.1.3.1.1.33ColumnradMepTransmitLtmActivationCmdread-createcurrentActivation command for starting Loop Trace. Set will be always to 'on' value. After operation was finished, Agent will turn the value to 'off'.
1.3.6.1.4.1.164.3.1.6.1.3.2NodeethOamService
1.3.6.1.4.1.164.3.1.6.1.3.2.1TableethOamServiceTablenot-accessiblecurrentService configuration table associated with Services running on a MEP.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1RowethOamServiceEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.1ColumnethOamServiceIdxnot-accessiblecurrentThis object indicates the Index of the service being accessed.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.2ColumnethOamServiceRowStatusread-createcurrentThis attribute allows to create/delete a row in this table.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.3ColumnethOamServicePriorityread-createcurrentThis object determines the priority of the service. It is sent as P bits in an OAM message originated by this service.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.4ColumnethOamServicePmEnableread-createcurrentThis object determines PM (Performance Monitoring) shall be enabled or not for the service.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.5ColumnethOamServiceFrameLossRatioThreshread-createcurrentThis object determines the Frame Loss ratio threshold in exponent of 1/10. That is, a value of 4 means that the threshold is 1E-4.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.6ColumnethOamServiceDelayThreshread-createcurrentThis object determines the delay threshold defined for this service, in measurement unit of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.7ColumnethOamServiceDelayVarThreshread-createcurrentThis object determines the delay variation threshold defined for this service, in measurement unit of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.8ColumnethOamServiceUnavailRatioThreshread-createcurrentThis object determines the Unavailability ratio threshold in exponent of 1/10. That is, a value of 4 means that the threshold is 1E-4.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.9ColumnethOamServiceTxFramesread-onlycurrentCounts the number of frames trnasmitted by since the time the service is up.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.10ColumnethOamServiceOverflowTxFramesread-onlycurrentThe number of times the associated ethOamServiceTxFrames counter has overflowed.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.11ColumnethOamServiceFrameLossread-onlycurrentCounts the number of frames lost since the time the service is up.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.12ColumnethOamServiceOverflowFrameLossread-onlycurrentThe number of times the associated ethOamServiceFrameLoss counter has overflowed.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.13ColumnethOamServiceFrameLossRatioread-onlycurrentIndicates the ratio of the lost frames since the time the service is up. The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned for ratio great…
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.14ColumnethOamServiceElapsedTimeread-onlycurrentIndicates the time elapsed in seconds since the time the service is up.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.15ColumnethOamServiceUnavailSecread-onlycurrentIndicates the number of unavailable seconds since the time the service is up.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.16ColumnethOamServiceUnavailRatioread-onlycurrentIndicates the ratio of the unavailable seconds since the time the service is up. The value is the ratio multiplied by 1E10. 0xFFFFFFFF will be returned for rat…
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.17ColumnethOamServiceFramesAboveDelayread-onlycurrentIndicates the number of frames arrived with delay greater than the delay threshold.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.18ColumnethOamServiceOverflowFramesAboveDelayread-onlycurrentIndicates the number of times the associated ethOamServiceFramesAboveDelay counter has overflowed.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.19ColumnethOamServiceFramesAboveDelayVarread-onlycurrentIndicates the number of frames arrived with delay variation greater than the delay variation threshold.
1.3.6.1.4.1.164.3.1.6.1.3.2.1.1.20ColumnethOamServiceOverflowFramesAboveDelayVarread-onlycurrentIndicates the number of times the associated ethOamServiceFramesAboveDelayVar counter has overflowed.
1.3.6.1.4.1.164.3.1.6.1.3.2.2TableethOamSvcCurrentStatTablenot-accessiblecurrentService Current Statistics Table.
1.3.6.1.4.1.164.3.1.6.1.3.2.2.1RowethOamSvcCurrentStatEntrynot-accessiblecurrentCurrent Statistics per service
1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.1ColumnethOamSvcCurrFramesAboveDelayThreshread-onlycurrentNumber of frames that arrived in the current interval at a delay greater than the threshold value defined for the service.
1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.2ColumnethOamSvcCurrFramesBelowDelayThreshread-onlycurrentNumber of frames that arrived in the current interval at a delay lower than or equal to the threshold value defined for the service.
1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.3ColumnethOamSvcCurrFramesAboveDVarThreshread-onlycurrentNumber of frames that arrived in the current interval at a delay variation greater than the threshold value defined for the service.
1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.4ColumnethOamSvcCurrFramesBelowDVarThreshread-onlycurrentNumber of frames that arrived in the current interval at a delay variation lower than or equal to the threshold value defined for the service.
1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.5ColumnethOamSvcCurrFramesTxCounterread-onlycurrentNumber of trnasmitted frames in the current interval.
1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.6ColumnethOamSvcCurrFramesLossCounterread-onlycurrentNumber of lost frames in the current interval.
1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.7ColumnethOamSvcCurrMinRoundTripDelayread-onlycurrentThe mininal value of round trip delay in the current interval. Values units are of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.8ColumnethOamSvcCurrMaxRoundTripDelayread-onlycurrentThe maximum value of round trip delay in the current interval. Values units are of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.9ColumnethOamSvcCurrAvgRoundTripDelayread-onlycurrentThe average round trip delay in the current interval. Values units are of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.10ColumnethOamSvcCurrMaxRoundTripDVarread-onlycurrentThe maximum value of round trip delay variation in the current interval. Values units are of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.11ColumnethOamSvcCurrAvgRoundTripDVarread-onlycurrentThe average round trip delay variation in the current interval. Values units are of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.12ColumnethOamSvcCurrElapsedTimeread-onlycurrentThe number of seconds that have elapsed since the beginning of the current interval.
1.3.6.1.4.1.164.3.1.6.1.3.2.2.1.13ColumnethOamSvcCurrUnavailSecread-onlycurrentThe number of seconds that the service was unavailable in the current interval.
1.3.6.1.4.1.164.3.1.6.1.3.2.3TableethOamSvcIntervalTablenot-accessiblecurrentService Interval Statistics Table.
1.3.6.1.4.1.164.3.1.6.1.3.2.3.1RowethOamSvcIntervalEntrynot-accessiblecurrentInterval Statistics per service
1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.1ColumnethOamSvcIntervalNumnot-accessiblecurrentThe Interval index, which is actualy the Interval number, where 1 is the most recently completed 15 minute interval, and 96 is the least recently completed 15 …
1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.2ColumnethOamSvcIntervalFramesAboveDelayThreshread-onlycurrentNumber of frames that arrived in a delay greater than the threshold value defined for the service in the selected interval.
1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.3ColumnethOamSvcIntervalFramesBelowDelayThreshread-onlycurrentNumber of frames that arrived in a delay lower than the threshold value defined for the service in the selected interval.
1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.4ColumnethOamSvcIntervalFramesAboveDVarThreshread-onlycurrentNumber of frames that arrived in a delay variation greater than the threshold value defined for the service in the selected interval.
1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.5ColumnethOamSvcIntervalFramesBelowDVarThreshread-onlycurrentNumber of frames that arrived in a delay variation lower than the threshold value defined for the service in the selected interval.
1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.6ColumnethOamSvcIntervalFramesTxCounterread-onlycurrentNumber of trnasmitted frames in the selected interval.
1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.7ColumnethOamSvcIntervalFramesLossCounterread-onlycurrentNumber of lost frames in the selected interval.
1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.8ColumnethOamSvcIntervalMinRoundTripDelayread-onlycurrentThe mininal value of round trip delay in the selected interval. Values units are of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.9ColumnethOamSvcIntervalMaxRoundTripDelayread-onlycurrentThe maximum value of round trip delay in the selected interval. Values units are of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.10ColumnethOamSvcIntervalAvgRoundTripDelayread-onlycurrentThe average round trip delay in the selected interval. Values units are of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.11ColumnethOamSvcIntervalMaxRoundTripDVarread-onlycurrentThe maximum value of round trip delay variation in the selected interval. Values units are of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.12ColumnethOamSvcIntervalAvgRoundTripDVarread-onlycurrentThe average round trip delay variation in the selected interval. Values units are of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.3.1.13ColumnethOamSvcIntervalUnavailSecread-onlycurrentThe number of seconds that the service was unavailable in the selected interval.
1.3.6.1.4.1.164.3.1.6.1.3.2.4TableethOamSvcTotalTablenot-accessiblecurrentETH OAM Service Total (24H) Statistics Table.
1.3.6.1.4.1.164.3.1.6.1.3.2.4.1RowethOamSvcTotalEntrynot-accessiblecurrentTotal Statistics per service
1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.1ColumnethOamSvcTotalFramesAboveDelayThreshread-onlycurrentNumber of frames that arrived in a delay greater than the threshold value defined for the service in the last 24H.
1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.2ColumnethOamSvcTotalFramesBelowDelayThreshread-onlycurrentNumber of frames that arrived in a delay lower than the threshold value defined for the service in the last 24H.
1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.3ColumnethOamSvcTotalFramesAboveDVarThreshread-onlycurrentNumber of frames that arrived in a delay variation greater than the threshold value defined for the service in the last 24H.
1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.4ColumnethOamSvcTotalFramesBelowDVarThreshread-onlycurrentNumber of frames that arrived in a delay variation lower than the threshold value defined for the service in the last 24H.
1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.5ColumnethOamSvcTotalFramesTxCounterread-onlycurrentNumber of trnasmitted frames in the last 24H.
1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.6ColumnethOamSvcTotalFramesLossCounterread-onlycurrentNumber of lost frames in the last 24H.
1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.7ColumnethOamSvcTotalMinRoundTripDelayread-onlycurrentThe mininal value of round trip delay in the last 24H. Values units are of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.8ColumnethOamSvcTotalMaxRoundTripDelayread-onlycurrentThe maximum value of round trip delay in the last 24H. Values units are of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.9ColumnethOamSvcTotalAvgRoundTripDelayread-onlycurrentThe average round trip delay in the last 24H. Values units are of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.10ColumnethOamSvcTotalMaxRoundTripDVarread-onlycurrentThe maximum value of round trip delay variation in the last 24H. Values units are of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.11ColumnethOamSvcTotalAvgRoundTripDVarread-onlycurrentThe average round trip delay variation in the last 24H. Values units are of 0.1 msec.
1.3.6.1.4.1.164.3.1.6.1.3.2.4.1.12ColumnethOamSvcTotalUnavailSecread-onlycurrentThe number of seconds that the service was unavailable in the last 24H.
1.3.6.1.4.1.164.3.1.6.1.3.3TableradMdTablenot-accessiblecurrentThe MaintenanceDomain table. Each row in the table represents a different maintenance domain. A Maintenance domain is described in 802.1ag (3.22) as the networ…
1.3.6.1.4.1.164.3.1.6.1.3.3.1RowradMdEntrynot-accessiblecurrentThe Maintenance Domain table entry. This entry is not lost upon reboot. It is backed up by stable storage
1.3.6.1.4.1.164.3.1.6.1.3.3.1.1ColumnradMdIndexnot-accessiblecurrentThe index to the maintenance domain table.
1.3.6.1.4.1.164.3.1.6.1.3.3.1.2ColumnradMdFormatread-createcurrentThe type (and thereby format) of the Maintenance Domain Name.
1.3.6.1.4.1.164.3.1.6.1.3.3.1.3ColumnradMdNameread-createcurrentThe Maintenance Domain name. The type/format of this object is determined by the value of the radMdNameType object. Each Maintenance Domain has unique name amo…
1.3.6.1.4.1.164.3.1.6.1.3.3.1.4ColumnradMdRowStatusread-createcurrentThis attribute allows to create/delete a row in this table. The writable columns in a row can not be changed if the row is active. All columns must have a vali…
1.3.6.1.4.1.164.3.1.6.1.3.4TableradMepLtrTablenot-accessiblecurrentThis table contains a list of Linktrace replies received by a specific MEP in response to a linktrace message.
1.3.6.1.4.1.164.3.1.6.1.3.4.1RowradMepLtrEntrynot-accessiblecurrentThe LinktraceReply table entry.
1.3.6.1.4.1.164.3.1.6.1.3.4.1.1ColumnradMepLtrReceiveOrdernot-accessiblecurrentAn index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. radMepLtrReceiveOrder are assigned sequentially from 1, in th…
1.3.6.1.4.1.164.3.1.6.1.3.4.1.2ColumnradMepLtrTtlread-onlycurrentTTL field value for a returned LTR.
1.3.6.1.4.1.164.3.1.6.1.3.4.1.3ColumnradMepLtrMacAddrread-onlycurrentThe MAC address in the header of the returned LTR.
1.3.6.1.4.1.164.3.1.6.1.3.4.1.4ColumnradMepLtrRelayread-onlycurrentThe value returned in the Relay Action field: rlyHit - the LTM reached an MP whose MAC address matches the target MAC address. rlyFdb - the Egress Port was det…
1.3.6.1.4.1.164.3.1.6.1.3.4.1.5ColumnradMepLtrIngressread-onlycurrentThe value returned in the Ingress Action Field of the LTM. ingNoTlv - no Reply Ingress TLV was returned in the LTM. ingOK - the target data frame would be pass…
1.3.6.1.4.1.164.3.1.6.1.3.4.1.6ColumnradMepLtrIngressPortIdSubtyperead-onlycurrentThe format of the Ingress Port ID. If the radMepLtrIngress object contains the value egrNoTlv(1), then the contents of this object are meaningless. 802.1ag cla…
1.3.6.1.4.1.164.3.1.6.1.3.4.1.7ColumnradMepLtrIngressPortIdread-onlycurrentIngress Port ID. This is an alpha-numeric string that contains a specific identifier for the port. The format of this object is determined by the value of the …
1.3.6.1.4.1.164.3.1.6.1.3.4.1.8ColumnradMepLtrEgressread-onlycurrentThe value returned in the Egress Action Field of the LTM. The value egrNoTlv(1) indicates that no Reply Egress TLV was returned in the LTM. 802.1ag clauses 12.…
1.3.6.1.4.1.164.3.1.6.1.3.4.1.9ColumnradMepLtrEgressPortIdSubtyperead-onlycurrentThe format of the egress Port ID. If the radMepLtrEgress object contains the value egrNoTlv(1), then the contents of this object are meaningless. 802.1ag claus…
1.3.6.1.4.1.164.3.1.6.1.3.4.1.10ColumnradMepLtrEgressPortIdread-onlycurrentEgress Port ID. The format of this object is determined by the value of the radMepLtrEgressPortIdSubtype object. If the radMepLtrEgress object contains the val…
1.3.6.1.4.1.164.3.1.6.1.3.5TableradMepCcStatusTablenot-accessiblecurrentThis table contains a list of CC Status received by a specific MEP from different Remote MEPs.
1.3.6.1.4.1.164.3.1.6.1.3.5.1RowradMepCcStatusEntrynot-accessiblecurrentAn entry in the CC Status Table.
1.3.6.1.4.1.164.3.1.6.1.3.5.1.1ColumnradMepRemoteMepIdxnot-accessiblecurrentThis is a running index for arriving CC messages (from different Remote MEPs) for a specific MEP ID.
1.3.6.1.4.1.164.3.1.6.1.3.5.1.2ColumnradMepCcStatusRemMepIdread-createcurrentThis attribute indicates the Remote MEP ID from which the CC messages has arrived.
1.3.6.1.4.1.164.3.1.6.1.3.5.1.3ColumnradMepCcStatread-onlycurrentThis object indicates the Continuity Check (CC) status (ITU-T Y.1731, Appendix I): mismerge - A MEP detects a Mismerge condition when a CCM frame arrives with …
1.3.6.1.4.1.164.3.1.6.1.3.5.1.4ColumnradMepCcStatusMacAddrread-onlycurrentThis object indicates the MAC Address in the CC Status message received.
1.3.6.1.4.1.164.3.1.6.1.3.6ScalarethOamStdEtherTyperead-writecurrentThe Standard Ether Type in an OAM message. This object will be RW until a formal value will be issued for standard Ethernet Type. When such Standard will exist…
1.3.6.1.4.1.164.3.1.6.1.3.7ScalarethOamStdMacAddressread-writecurrentThe Standard MAC Address in an OAM message. This object will be RW until a formal value will be issued for standard MAC Address. When such Standard will exist,…
1.3.6.1.4.1.164.3.1.6.1.3.8Tabledot1agXCfmMdTablenot-accessiblecurrentThe Maintenance Domain table. Each row in the table represents a different maintenance association.
1.3.6.1.4.1.164.3.1.6.1.3.8.1Rowdot1agXCfmMdEntrynot-accessiblecurrentThe Maintenance Domain table entry.
1.3.6.1.4.1.164.3.1.6.1.3.8.1.1Columndot1agXCfmMdProtocolread-createcurrent.
1.3.6.1.4.1.164.3.1.6.1.3.9Tabledot1agXCfmMepTablenot-accessiblecurrentThe Maintenance Association End Point (MEP) table.
1.3.6.1.4.1.164.3.1.6.1.3.9.1Rowdot1agXCfmMepEntrynot-accessiblecurrentThe MEP table entry
1.3.6.1.4.1.164.3.1.6.1.3.9.1.1Columndot1agXCfmMepContinuityVerModeread-createcurrentThis object determines the OAM behavior of the MEP: disabled - no Continuity Verification is done cc_based - Continuity Verification is done based on incoming …
1.3.6.1.4.1.164.3.1.6.1.3.9.1.2Columndot1agXCfmMepDestAddrTyperead-createcurrentThis object determines if the OAM messages are sent to user defined unicast address, or to RAD proprietary multicast address.
1.3.6.1.4.1.164.3.1.6.1.3.9.1.3Columndot1agXCfmMepDestMacAddrread-createcurrentThis object determines the MAC address that OAM packets are sent to.
1.3.6.1.4.1.164.3.1.6.1.3.10Tabledot1agXCfmMepDbTablenot-accessiblecurrentThe MEP DB table
1.3.6.1.4.1.164.3.1.6.1.3.10.1Rowdot1agXCfmMepDbEntrynot-accessiblecurrentThe MEP Database table entry.
1.3.6.1.4.1.164.3.1.6.1.3.10.1.1Columndot1agXCfmMepCcStatread-onlycurrentThis object indicates the Continuity Check (CC) status (ITU-T Y.1731, Appendix I): mismerge - A MEP detects a Mismerge condition when a CCM frame arrives with …
1.3.6.1.4.1.164.3.1.6.1.4NodeethIfRing
1.3.6.1.4.1.164.3.1.6.1.4.0NodeethIfRingEvents
1.3.6.1.4.1.164.3.1.6.1.4.0.1NotificationethIfRingStatusChangecurrentThis trap indicates that the status of the Ethernet Ring has been changed.
1.3.6.1.4.1.164.3.1.6.1.4.1TableethIfRingTablenot-accessiblecurrentEthernet Ring Table.
1.3.6.1.4.1.164.3.1.6.1.4.1.1RowethIfRingEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.3.1.6.1.4.1.1.1ColumnethIfRingIdxnot-accessiblecurrentThis object is an Index that can indicate Slot, Ring, Cnfg etc., according to the device used. When NA, 1 will be used.
1.3.6.1.4.1.164.3.1.6.1.4.1.1.2ColumnethIfRingAdminStatusread-writecurrentThis object denotes the Ethernet Ring administrative status.
1.3.6.1.4.1.164.3.1.6.1.4.1.1.3ColumnethIfRingPortsread-writecurrentThe set of ports which are assigned to be ring members. The default value of this object is a string of zeros.
1.3.6.1.4.1.164.3.1.6.1.4.1.1.4ColumnethIfRingOperStatusread-onlycurrentThis object indicates the Ethernet Ring operational status.
1.3.6.1.4.1.164.3.1.6.1.4.1.1.5ColumnethIfRingKeepAliveIntervalread-writecurrentThis parameter indicates the period of time (in msec.) between two consequent Keep Alive messages.
1.3.6.1.4.1.164.3.1.6.1.4.1.1.6ColumnethIfRingKeepAliveThreshread-writecurrentThis parameter indicates the maximum number of missed Keep Alive answer messages acceptable, after which link status will be failed.
1.3.6.1.4.1.164.3.1.6.1.4.1.1.7ColumnethIfRingKeepAliveVlanIdread-writecurrentDedicated VLAN ID for keep alive messages.
1.3.6.1.4.1.164.3.1.6.1.4.1.1.8ColumnethIfRingMultiCastVlanIdread-writecurrentDedicated VLAN ID for multicast messages.
1.3.6.1.4.1.164.3.1.6.1.4.1.1.9ColumnethIfRingRowStatusread-writecurrentImplement creation/deletion of rings in the device.
1.3.6.1.4.1.164.3.1.6.1.5NodeethIfStorming
1.3.6.1.4.1.164.3.1.6.1.5.1TableethIfStormTablenot-accessiblecurrentEthernet Storming Table.
1.3.6.1.4.1.164.3.1.6.1.5.1.1RowethIfStormEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.3.1.6.1.5.1.1.1ColumnethIfStormCnfgIdxnot-accessiblecurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.1.6.1.5.1.1.2ColumnethIfStormIfIdxnot-accessiblecurrentA unique index of the ethernet interface/port.
1.3.6.1.4.1.164.3.1.6.1.5.1.1.3ColumnethIfStormDirectionnot-accessiblecurrentThis object indicates the port's Storm Direction.
1.3.6.1.4.1.164.3.1.6.1.5.1.1.4ColumnethIfStormPacketTypenot-accessiblecurrentPacket Type on which Storming operations will be performed.
1.3.6.1.4.1.164.3.1.6.1.5.1.1.5ColumnethIfStormCtrlEnableread-writecurrentThis object indicates if the Storm Controling is Enabled or Disabled for the relevant entry.
1.3.6.1.4.1.164.3.1.6.1.5.1.1.6ColumnethIfStormMaxRateread-writecurrentThis object indicates the Maximum Rate at which Storming packets are forwarded, in Kbps.For some devices the units are PPS(Packets Per Second ) or kilobytes pe…
1.3.6.1.4.1.164.3.1.6.1.6NodeethIfOamEfm
1.3.6.1.4.1.164.3.1.6.1.6.0Nodedot3OamEvents
1.3.6.1.4.1.164.3.1.6.1.6.0.1Notificationdot3OamOperStatusChangecurrentThis trap is sent when OAM EFM Link goes Up or Down. Up - is considered when dot3OamOperStatus value changes to operational(9) from any other value. Down - is …
1.3.6.1.4.1.164.3.1.6.1.6.0.2Notificationdot3OamPeerEventcurrentThis trap is sent when value of dot3OamXPeerState changes from any value to one of the following values: linkFault, dyingGasp, criticalEvent. This trap has no …
1.3.6.1.4.1.164.3.1.6.1.6.1Tabledot3OamDescrTablenot-accessiblecurrentThis table supports definitions of Descriptors (profiles) of OAM EFM Links.
1.3.6.1.4.1.164.3.1.6.1.6.1.1Rowdot3OamDescrEntrynot-accessiblecurrentEach entry corresponds to a single OAM EFM Descriptor (profile). Each Descriptor contains a set of OAM EFM Link configuration parameters. The configuration par…
1.3.6.1.4.1.164.3.1.6.1.6.1.1.1Columndot3OamDescrIdnot-accessiblecurrentThis object is the unique index associated with this Descriptor (profile). Entries in this table are referenced via the object dot3OamXDescrId in dot3OamXEntry.
1.3.6.1.4.1.164.3.1.6.1.6.1.1.2Columndot3OamDescrRowStatusread-createcurrentThis object controls creation/deletion of the associated entry in this table per the semantics of RowStatus. If an active entry is referenced in dot3OamXDescrI…
1.3.6.1.4.1.164.3.1.6.1.6.1.1.3Columndot3OamDescrModeread-createcurrentThis object controls the mode of OAM operation for an Ethernet-like interface referencing this Descriptor. OAM on Ethernet interfaces may be in 'active' mode o…
1.3.6.1.4.1.164.3.1.6.1.6.1.1.4Columndot3OamDescrLbRxOperationread-createcurrentSince OAM loopback is a disruptive operation (user traffic does not pass), this object provides a mechanism to provide control: whether received OAM loopback c…
1.3.6.1.4.1.164.3.1.6.1.6.1.1.5Columndot3OamDescrRateLimitread-createcurrentThis object defines how many OAM frames can be sent per second (maximum) for an OAM EFM Link referencing this Descriptor.
1.3.6.1.4.1.164.3.1.6.1.6.2Tabledot3OamXTablenot-accessiblecurrentThis table is an extension of dot3OamTable of standard DOT3-OAM-MIB.
1.3.6.1.4.1.164.3.1.6.1.6.2.1Rowdot3OamXEntrynot-accessiblecurrentAn entry in dot3OamXTable.
1.3.6.1.4.1.164.3.1.6.1.6.2.1.1Columndot3OamXDescrIdread-writecurrentThis object points to an entry of dot3OamDescrTable (dot3OamDescrId), which defines part of the configuration parameters for this OAM EFM Link. As long as one …
1.3.6.1.4.1.164.3.1.6.1.6.2.1.2Columndot3OamXPeerStateread-onlycurrentThis object reports the state of the Peer of the OAM EFM Link. unknown - at the initialization of the device, or after Reset, when there is still no data about…
1.3.6.1.4.1.164.3.1.6.1.7NodeethIfMacLayer
1.3.6.1.4.1.164.3.1.6.1.7.0NodeethIfMacLayerEvents
1.3.6.1.4.1.164.3.1.6.1.7.0.1NotificationethIfMacAccessViolationcurrentThis trap indicates that an Access Violation occurred.
1.3.6.1.4.1.164.3.1.6.1.7.1TableethIfSrcMacCtrlTablenot-accessiblecurrentThis table supports source MAC addresses control parameters per interface. Source MAC control will be used mainly for security. Only packets with certain sourc…
1.3.6.1.4.1.164.3.1.6.1.7.1.1RowethIfSrcMacCtrlEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.3.1.6.1.7.1.1.1ColumnethIfSrcMacCtrlIndexnot-accessiblecurrentThe index of the MAC Layer interface supporting source MAC control feature. It may be the ifIndex of the ETH/Bridge Port.
1.3.6.1.4.1.164.3.1.6.1.7.1.1.2ColumnethIfSrcMacCtrlIdx2not-accessiblecurrentA second index that can be used. For example: The VLAN ID for which the source MAC control feature is supported. When this index is not in use, its value will …
1.3.6.1.4.1.164.3.1.6.1.7.1.1.3ColumnethIfSrcMacCtrlread-writecurrentEnable or disable the source MAC control on the current interface. The device should not enable source MAC control if for the current interface there are more …
1.3.6.1.4.1.164.3.1.6.1.7.1.1.4ColumnethIfSrcMacCtrlMaxPermitAddrread-writecurrentThis is the maximum number of permitted MAC addresses (static and learned) for the current interface.
1.3.6.1.4.1.164.3.1.6.1.7.1.1.5ColumnethIfSrcMacCtrlCurNumPermitAddrread-onlycurrentThis is the number of source MAC addresses currently permitted for the current interface.
1.3.6.1.4.1.164.3.1.6.1.7.1.1.6ColumnethIfSrcMacCtrlFlushAddrCmdread-writecurrentWhen set to on (3) this command will erase all the learned addresses and invalid addresses of the selected interface in the ethIfSrcMacCtrlAddrTable. After ope…
1.3.6.1.4.1.164.3.1.6.1.7.1.1.7ColumnethIfSrcMacCtrlAgingread-writecurrentThe timeout period in seconds for aging out dynamically learned source MAC addresses. Valid Values: 0 - disable 10-1000000
1.3.6.1.4.1.164.3.1.6.1.7.1.1.8ColumnethIfSrcMacCtrlLockingread-writecurrentWhen set to lock (3) this command will lock the Source MAC Address learning. No more learned addresses will be added to the ethIfSrcMacCtrlAddrTable. When set …
1.3.6.1.4.1.164.3.1.6.1.7.1.1.9ColumnethIfSrcMacCtrlViolationActionread-writecurrentDetermines the action that the device will take upon security violation. drop(2) - the violating packets will be dropped. dropNotify (3)- the violating packets…
1.3.6.1.4.1.164.3.1.6.1.7.1.1.10ColumnethIfSrcMacCtrlLastViolatingAddrread-writecurrentThis object indicates the last MAC address that violated the security on the current interface. If no violation, the agent will return: 00-00-00-00-00-00 .
1.3.6.1.4.1.164.3.1.6.1.7.1.1.11ColumnethIfSrcMacCtrlPortStatusread-onlycurrentThis object represents the operational status of the MAC Control feature on an interface. shutdown(2) - This indicates that the port is shutdown due to securit…
1.3.6.1.4.1.164.3.1.6.1.7.2TableethIfSrcMacCtrlAddrTablenot-accessiblecurrentThis table shows which MAC Addresses are permitted when the source MAC control is enabled and which non permitted MAC Addresses attempted to access the current…
1.3.6.1.4.1.164.3.1.6.1.7.2.1RowethIfSrcMacCtrlAddrEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.3.1.6.1.7.2.1.1ColumnethIfSrcMacCtrlAddrIndexnot-accessiblecurrentThe index of the interface for which the source MAC addresses exist in this table. It may be the ifIndex of the ETH/Bridge Port.
1.3.6.1.4.1.164.3.1.6.1.7.2.1.2ColumnethIfSrcMacCtrlAddrnot-accessiblecurrentA unicast source MAC address that was learned or statically configured for the current interface. Packets with this source MAC address will be accepted by the …
1.3.6.1.4.1.164.3.1.6.1.7.2.1.3ColumnethIfSrcMacCtrlAddrIdx3not-accessiblecurrentA third index that can be used. For example: The VLAN ID for which the source MAC control feature is supported. When this index is not in use, its value will b…
1.3.6.1.4.1.164.3.1.6.1.7.2.1.4ColumnethIfSrcMacCtrlAddrRowStatusread-writecurrentThis MIB object will be used in order to create/delete a static row or delete an address that is not allowed to access the current interface (ethIfSrcMacCtrlAd…
1.3.6.1.4.1.164.3.1.6.1.7.2.1.5ColumnethIfSrcMacCtrlAddrStatusread-onlycurrentThe status of this entry. The meanings of the values are: invalid (2) - the current address is not allowed to access this interface. learned(3) - the current a…
1.3.6.1.4.1.164.3.1.6.3Nodeds3Interface
1.3.6.1.4.1.164.3.1.6.3.1NodeprtDs3PerfHistory
1.3.6.1.4.1.164.3.1.6.3.1.1TableprtSDs3IfTablenot-accessiblecurrentThe DS3 interface table.
1.3.6.1.4.1.164.3.1.6.3.1.1.1RowprtDs3IfEntrynot-accessiblecurrentAn entry in the DS3 interface table.
1.3.6.1.4.1.164.3.1.6.3.1.1.1.1ColumnprtDs3IfTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the near end current error- measurement period.
1.3.6.1.4.1.164.3.1.6.3.1.1.1.2ColumnprtDs3IfValidIntervalsread-onlycurrentThe number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 h…
1.3.6.1.4.1.164.3.1.6.3.1.2TableprtDs3CurrentTablenot-accessiblecurrentThe DS3 Current table.
1.3.6.1.4.1.164.3.1.6.3.1.2.1RowprtDs3CurrentEntrynot-accessiblecurrentAn entry in the DS3 Current table.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.1ColumnprtDs3CurrentLOSread-onlycurrentThe counter associated with the number of LOS seconds, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.2ColumnprtDs3CurrentOOFread-onlycurrentThe counter associated with the number of OOF seconds, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.3ColumnprtDs3CurrentLOCread-onlycurrentThe counter associated with the number of LOC seconds, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.4ColumnprtDs3CurrentAISread-onlycurrentThe counter associated with the number of AIS seconds, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.5ColumnprtDs3CurrentRDIread-onlycurrentThe counter associated with the number of RDI seconds, encountered by a DS3 interface.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.6ColumnprtDs3CurrentUASread-onlycurrentThe counter associated with the number of UAS, encountered by a SONET interface.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.7ColumnprtDs3CurrentBIPread-onlycurrentThe counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.8ColumnprtDs3CurrentFEBEread-onlycurrentThe counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.9ColumnprtDs3CurrentSLMread-onlycurrentThe counter associated with the number of SLM seconds, encountered by an E3 (only ) interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.10ColumnprtDs3CurrentSESread-onlycurrentThe counter associated with the number of SES encountered by a E3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.11ColumnprtDs3CurrentESread-onlycurrentThe number of Errored Seconds, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.12ColumnprtDs3CurrentBitParityread-onlycurrentBit Parity Error counter. Relevant to T3 only.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.13ColumnprtDs3CurrentPlcpLOFread-onlycurrentThe counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter …
1.3.6.1.4.1.164.3.1.6.3.1.2.1.14ColumnprtDs3CurrentPlcpRAIread-onlycurrentReceiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.15ColumnprtDs3CurrentPlcpBIPread-onlycurrentThe counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (exte…
1.3.6.1.4.1.164.3.1.6.3.1.2.1.16ColumnprtDs3CurrentPlcpFEBEread-onlycurrentThe counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (ext…
1.3.6.1.4.1.164.3.1.6.3.1.2.1.17ColumnprtDs3CurrentBPVread-onlycurrentNumber of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Electrical Line of Fo…
1.3.6.1.4.1.164.3.1.6.3.1.2.1.18ColumnprtDs3CurrentLCEread-onlycurrentNumber of LCE (Link Code Errors) encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/T3.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.19ColumnprtDs3CurrentStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.3.1.3TableprtDs3IntervalTablenot-accessiblecurrentThe DS3 Interval table.
1.3.6.1.4.1.164.3.1.6.3.1.3.1RowprtDs3IntervalEntrynot-accessiblecurrentAn entry in the DS3 Interval table.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.1ColumnprtDs3IntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.3.1.6.3.1.3.1.2ColumnprtDs3IntervalLOSread-onlycurrentThe counter associated with the number of LOS seconds , encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.3ColumnprtDs3IntervalOOFread-onlycurrentThe counter associated with the number of OOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.4ColumnprtDs3IntervalLOCread-onlycurrentThe counter associated with the number of LOC seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.5ColumnprtDs3IntervalAISread-onlycurrentThe counter associated with the number of AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.6ColumnprtDs3IntervalRDIread-onlycurrentThe counter associated with the number of RDI seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.7ColumnprtDs3IntervalUASread-onlycurrentThe counter associated with the number of UAS, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.8ColumnprtDs3IntervalBIPread-onlycurrentThe counter associated with the number of BIP errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.9ColumnprtDs3IntervalFEBEread-onlycurrentThe counter associated with the number of FEBE errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.10ColumnprtDs3IntervalSLMread-onlycurrentThe counter associated with the number of SLM seconds, encountered by an E3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.11ColumnprtDs3IntervalSESread-onlycurrentThe counter associated with the number of SES encountered by a E3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.12ColumnprtDs3IntervalESread-onlycurrentThe number of Errored Seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.13ColumnprtDs3IntervalBitParityread-onlycurrentBit Parity Error counter. Relevant to T3 only.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.14ColumnprtDs3IntervalPlcpLOFread-onlycurrentThe counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter …
1.3.6.1.4.1.164.3.1.6.3.1.3.1.15ColumnprtDs3IntervalPlcpRAIread-onlycurrentReceiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.16ColumnprtDs3IntervalPlcpBIPread-onlycurrentThe counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (exte…
1.3.6.1.4.1.164.3.1.6.3.1.3.1.17ColumnprtDs3IntervalPlcpFEBEread-onlycurrentThe counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (ext…
1.3.6.1.4.1.164.3.1.6.3.1.3.1.18ColumnprtDs3IntervalBPVread-onlycurrentNumber of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Electrical Line of …
1.3.6.1.4.1.164.3.1.6.3.1.3.1.19ColumnprtDs3IntervalLCEread-onlycurrentNumber of LCE (Link Code Errors) encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/…
1.3.6.1.4.1.164.3.1.6.3.1.3.1.20ColumnprtDs3IntervalStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.3.1.4TableprtDs3TotalTablenot-accessiblecurrentA list of Total entries.
1.3.6.1.4.1.164.3.1.6.3.1.4.1RowprtDs3TotalEntrynot-accessiblecurrentAn entry of Total table.
1.3.6.1.4.1.164.3.1.6.3.1.4.1.6ColumnprtDs3TotalUASread-onlycurrentNumber of UASs (Unavailable Seconds) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.
1.3.6.1.4.1.164.3.1.6.3.1.4.1.17ColumnprtDs3TotalBPVread-onlycurrentNumber of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.
1.3.6.1.4.1.164.3.1.6.3.1.4.1.18ColumnprtDs3TotalLCEread-onlycurrentNumber of LCE (Link Code Errors) encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.
1.3.6.1.4.1.164.3.1.6.3.1.4.1.19ColumnprtDs3TotalSESread-onlycurrentNumber of SES (Severely Errored Seconds) encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.
1.3.6.1.4.1.164.3.1.6.3.2Tabledsx3XConfigTablenot-accessiblecurrentAn extension to the DS3 Configuration table.
1.3.6.1.4.1.164.3.1.6.3.2.1Rowdsx3XConfigEntrynot-accessiblecurrentAn entry containing additional configuration parameters.
1.3.6.1.4.1.164.3.1.6.3.2.1.1Columndsx3AisEnableread-writecurrentEnable/ disable AIS transmit when Ethernet (for TDMoIP) line is disconnected.
1.3.6.1.4.1.164.3.1.6.3.2.1.2Columndsx3TxClockSourceread-writecurrentThe source of Transmit Clock. loopTiming indicates that the recovered receive clock is used as the transmit clock. localTiming indicates that a local clock sou…
1.3.6.1.4.1.164.3.1.6.3.3Tabledsx3MappingTablenot-accessiblecurrentThe DS3/E3 mapping table associates DS3/E3 channels with logical or physical interfaces. For example, consider a DS3 device with 16 T1's and 1 VCG. There are 2…
1.3.6.1.4.1.164.3.1.6.3.3.1Rowdsx3MappingEntrynot-accessibledeprecatedAn entry in the DS3 mapping table.
1.3.6.1.4.1.164.3.1.6.3.3.1.1Columndsx3MappingDs3Indexnot-accessiblecurrentThe index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. This value is also equal to dsx3LineIndex used in dsx3ConfigE…
1.3.6.1.4.1.164.3.1.6.3.3.1.2Columndsx3MappingNumbernot-accessiblecurrentThe channel number for this entry. For RICi-16 this is the channel number 1...28.
1.3.6.1.4.1.164.3.1.6.3.3.1.3Columndsx3MappingIfIndexread-writecurrentAn index value that uniquely identifies a logical or physical interface mapped to a DS3/E3 channel. If no interface is currently using a channel, the value sho…
1.3.6.1.4.1.164.3.1.6.4Nodeds1Interface
1.3.6.1.4.1.164.3.1.6.4.0NodeprtDS1Events
1.3.6.1.4.1.164.3.1.6.4.0.1Notificationds1LocalMultiframeAlarmTrapcurrentThis trap indicates near end (Local) Loss of Multiframe Alignment, of the user E1 interface.
1.3.6.1.4.1.164.3.1.6.4.0.2Notificationds1RemoteMultiframeAlarmTrapcurrentThis trap indicates that the far end (remote) unit, connected to the user E1 interface, reports Loss of Multiframe Alignment.
1.3.6.1.4.1.164.3.1.6.4.0.3Notificationds1LinkFrameSlipTrapcurrentThis trap indicates that a Frame Slip occurred at the user DS1 interface. This usually indicates timing problems (incorrect selection of timing reference), on …
1.3.6.1.4.1.164.3.1.6.4.0.4Notificationds1BpvErrorTrapcurrentThis trap indicates a Bipolar Violation (BPV) error has been detected at the user DS1 interface.
1.3.6.1.4.1.164.3.1.6.4.0.5Notificationds1ExcessiveBpvTrapcurrentThis trap indicates excessive number of Bipolar Violation errors (BPV) detected by the user DS1 interface
1.3.6.1.4.1.164.3.1.6.4.0.6Notificationds1Crc4ErrorTrapcurrentThis trap indicates that a frame with CRC-4 error has been detected at the user DS1 interface.
1.3.6.1.4.1.164.3.1.6.4.0.7Notificationds1ExcessiveErrorRatioTrapcurrentThis trap indicates that the error rate, detected at the user DS1 interface, on the frame synchronization bits is high, as defined by ITU-T Rec. G.732.
1.3.6.1.4.1.164.3.1.6.4.0.8Notificationds1RemoteSyncLossTrapcurrentThis trap indicates that the far-end (remote) unit, connected to user DS1 interface, reports Loss of Frame Alignment (Sync Loss).
1.3.6.1.4.1.164.3.1.6.4.0.9Notificationds1LocalSyncLossTrapcurrentThis trap indicates near end (Local) Loss of Frame Alignment failure (Sync Loss), of the user DS1 interface
1.3.6.1.4.1.164.3.1.6.4.0.10Notificationds1AisSyncLossTrapcurrentThis trap indicates near end (Local) Loss of Frame Alignment (Sync Loss), caused by the reception of AIS at the user DS1 interface.
1.3.6.1.4.1.164.3.1.6.4.0.11Notificationds1AisTrapcurrentThis trap indicates AIS being received at the user DS1 interface.
1.3.6.1.4.1.164.3.1.6.4.0.12Notificationds1NetworkRemoteLoopTrapcurrentThis trap indicates that a remote loopback has been activated, on the local uplink interface.
1.3.6.1.4.1.164.3.1.6.4.0.13Notificationds1RemoteLoopTrapcurrentThis trap indicates that a remote loopback has been activated, on the local user port.
1.3.6.1.4.1.164.3.1.6.4.0.14Notificationds1LocalLoopTrapcurrentThis trap indicates that a local loopback has been activated on the user port.
1.3.6.1.4.1.164.3.1.6.4.0.15Notificationds1ExcessiveFrameSlipTrapcurrentThis trap indicates that the number of Frame Slips detected at the user DS1 interface, during the last minute exceeds threshold. For LA-110, threshold value is…
1.3.6.1.4.1.164.3.1.6.4.0.16Notificationds1ExcessiveCrc4ErrorTrapcurrentThis trap indicates that the error rate detected on the CRC-4 bits at the user DS1 interface, is high.
1.3.6.1.4.1.164.3.1.6.4.0.17Notificationds1ExcessiveLocalMfAlarmTrapcurrentThis trap indicates that the number of local Loss of Multiframe Alignment events, detected at the user E1 interface during the last minute exceeds threshold. F…
1.3.6.1.4.1.164.3.1.6.4.0.18Notificationds1ExcessiveRemoteMfAlarmTrapcurrentThis trap indicates that the number of Loss of multiframe alignment events reported by the remote unit connected to the user E1 interface during the last minut…
1.3.6.1.4.1.164.3.1.6.4.0.19Notificationds1ExcessiveRemoteSyncLossTrapcurrentThis trap indicates that the number of far end (remote) Loss of Synchronization alarms, reported by the user DS1 interface during the last minute, exceeds thre…
1.3.6.1.4.1.164.3.1.6.4.0.20Notificationds1ExcessiveLocalSyncLossTrapcurrentThis trap indicates that the number of Loss of local Synchronization alarms reported by the user DS1 interface during the last minute, exceeds threshold. For L…
1.3.6.1.4.1.164.3.1.6.4.0.21Notificationds1SignalLossTrapcurrentThis trap indicates Signal Loss. (possible reason - cable disconnection. etc.)
1.3.6.1.4.1.164.3.1.6.4.1NodeprtDs1PerfHistory
1.3.6.1.4.1.164.3.1.6.4.1.2Tabledsx1XCurrentTablenot-accessiblecurrentA list of current statistics entries. This table contains additional objects for the current table.
1.3.6.1.4.1.164.3.1.6.4.1.2.1Rowdsx1XCurrentEntrynot-accessiblecurrentAn entry containing additional statistical counters applicable to a particular current table.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.1Columndsx1CurrentLOSread-onlycurrentThe counter associated with the number of LOS seconds, encountered by a DS1 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.2Columndsx1CurrentLOFread-onlycurrentThe counter associated with the number of LOF seconds, encountered by a DS1 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.3Columndsx1CurrentLOCread-onlycurrentLoss Of Cell delineation. Counts number of cells the ATM UNI cells receiver lost cells delineation .
1.3.6.1.4.1.164.3.1.6.4.1.2.1.4Columndsx1CurrentAISread-onlycurrentThe counter associated with the number of AIS seconds, encountered by a DS1 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.5Columndsx1CurrentRAIread-onlycurrentRemote Alarm Indication: Transmitted in the outgoing direction (toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received…
1.3.6.1.4.1.164.3.1.6.4.1.2.1.6Columndsx1CurrentLOMFread-onlycurrentLoss of Multi-Frame sequence in E1 time slot 16.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.7Columndsx1CurrentFEBEread-onlycurrentFar End Block Errors, as reported in the first bit of frames 13 and 15, on multiframe E1 lines with CRC4, in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.8Columndsx1CurrentStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.4.1.2.1.9Columndsx1CurrentBPVread-onlycurrentThe counter associated with the number of BPVs (Bi-Polar Violations) encountered by a DS1 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.10Columndsx1CurrentLOCRCMFread-onlycurrentLoss of CRC4 Multi-Frame sequence in E1. encountered in the current 15 minute interval
1.3.6.1.4.1.164.3.1.6.4.1.2.1.11Columndsx1CurrentLOFCread-onlycurrentCounts the number of loss of frame events measured. encountered in the current 15 minute interval
1.3.6.1.4.1.164.3.1.6.4.1.2.1.12Columndsx1CurrentCRCErrorsread-onlycurrentCounts the number of CRC error events, encountered in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.3Tabledsx1XIntervalTablenot-accessiblecurrentA list of Interval entries. This table contains additional objects for the interval table.
1.3.6.1.4.1.164.3.1.6.4.1.3.1Rowdsx1XIntervalEntrynot-accessiblecurrentAn entry containing additional statistical counters applicable to a particular interval table.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.1Columndsx1IntervalLOSread-onlycurrentThe counter associated with the number of LOS seconds , encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.2Columndsx1IntervalLOFread-onlycurrentThe counter associated with the number of OOF seconds, encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.3Columndsx1IntervalLOCread-onlycurrentLoss Of Cell delineation. Counts number of cells the ATM UNI cells receiver lost cells delineation .
1.3.6.1.4.1.164.3.1.6.4.1.3.1.4Columndsx1IntervalAISread-onlycurrentThe counter associated with the number of AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.5Columndsx1IntervalRAIread-onlycurrentRemote Alarm Indication: Transmitted in the outgoing direction (toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received…
1.3.6.1.4.1.164.3.1.6.4.1.3.1.6Columndsx1IntervalLOMFread-onlycurrentLoss of Multi-Frame sequence in E1 time slot 16.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.7Columndsx1IntervalFEBEread-onlycurrentFar End Block Errors, as reported in the first bit of frames 13 and 15, on multiframe E1 lines with CRC4, in one of the previous 96, individual, 15 minute inte…
1.3.6.1.4.1.164.3.1.6.4.1.3.1.8Columndsx1IntervalStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.4.1.3.1.9Columndsx1IntervalBPVread-onlycurrentThe counter associated with the number of BPV (Bi-Polar Violations) encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.10Columndsx1IntervalLOCRCMFread-onlycurrentLoss of CRC4 Multi-Frame sequence in E1.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.11Columndsx1IntervalLOFCread-onlycurrentCounts the number of loss of frame events measured in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.4.1.4Tabledsx1XTotalTablenot-accessiblecurrentA list of Total statistics entries. This table contains additional objects for the Total table.
1.3.6.1.4.1.164.3.1.6.4.1.4.1Rowdsx1XTotalEntrynot-accessiblecurrentAn entry containing additional statistical counters applicable to a particular current table.
1.3.6.1.4.1.164.3.1.6.4.1.4.1.1Columndsx1TotalLOSread-onlycurrentThe counter associated with the number of LOS (Loss of Signal) seconds encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute inter…
1.3.6.1.4.1.164.3.1.6.4.1.4.1.9Columndsx1TotalBPVread-onlycurrentThe counter associated with the number of BPV (Bi-Polar Violations) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute interval…
1.3.6.1.4.1.164.3.1.6.4.1.4.1.11Columndsx1TotalLOFCread-onlycurrentThe counter associated with the number loss of frames encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.4.1.164.3.1.6.4.1.5Tabledsx1DataStreamStatTablenot-accessiblecurrentThe DS1 Data Stream Statistics table.
1.3.6.1.4.1.164.3.1.6.4.1.5.1Rowdsx1DataStreamStatEntrynot-accessiblecurrentAn entry in the DS1 Data Stream Statistics table.
1.3.6.1.4.1.164.3.1.6.4.1.5.1.1Columndsx1DataStreamStatIfIndexnot-accessiblecurrentThe index of the DS1 interface. It may be ifIndex.
1.3.6.1.4.1.164.3.1.6.4.1.5.1.2Columndsx1DataStreamStatIndexnot-accessiblecurrentThe DS1 Data Stream Index. For Vmux - the following indices are used: 1 for Transparent 2-3 for SS71-SS72 (respectively) 4-7 for Data1-Data4 (respectively) 8 f…
1.3.6.1.4.1.164.3.1.6.4.1.5.1.3Columndsx1DataStreamStatValidread-onlycurrentIndicates whether this Data Stream is valid or not. When invalid - all counters are irrelevant.
1.3.6.1.4.1.164.3.1.6.4.1.5.1.4Columndsx1DataStreamStatInFramesread-onlycurrentThe counter associated with the number of received frames, encountered by the DS1 Data Stream.
1.3.6.1.4.1.164.3.1.6.4.1.5.1.5Columndsx1DataStreamStatInBytesread-onlycurrentThe counter associated with the number of received bytes, encountered by the DS1 Data Stream.
1.3.6.1.4.1.164.3.1.6.4.1.5.1.6Columndsx1DataStreamStatInDiscardsread-onlycurrentThe counter associated with the number of Discarded incoming frames, encountered by the DS1 Data Stream.
1.3.6.1.4.1.164.3.1.6.4.1.5.1.7Columndsx1DataStreamStatInErrorsread-onlycurrentThe counter associated with the number of received Errored frames, encountered by the DS1 Data Stream.
1.3.6.1.4.1.164.3.1.6.4.1.5.1.8Columndsx1DataStreamStatOutFramesread-onlycurrentThe counter associated with the number of transmitted frames, encountered by the DS1 Data Stream.
1.3.6.1.4.1.164.3.1.6.4.1.5.1.9Columndsx1DataStreamStatOutBytesread-onlycurrentThe counter associated with the number of transmitted bytes, encountered by the DS1 Data Stream.
1.3.6.1.4.1.164.3.1.6.4.1.5.1.10Columndsx1DataStreamStatOutDiscardsread-onlycurrentThe counter associated with the number of Discarded outgoing frames, encountered by the DS1 Data Stream.
1.3.6.1.4.1.164.3.1.6.4.1.5.1.11Columndsx1DataStreamStatOutErrorsread-onlycurrentThe counter associated with the number of errored transmitted frames, encountered by the DS1 Data Stream.
1.3.6.1.4.1.164.3.1.6.4.2Tabledsx1XConfigTablenot-accessiblecurrentAn extension to the DS1 Configuration table.
1.3.6.1.4.1.164.3.1.6.4.2.1Rowdsx1XConfigEntrynot-accessiblecurrentAn entry containing additional configuration parameters.
1.3.6.1.4.1.164.3.1.6.4.2.1.1Columndsx1IdleCoderead-writecurrentByte pattern of the data received/transmitted in the E1T1 framer idle timeslots. Valid range: (0 - FF HEX).
1.3.6.1.4.1.164.3.1.6.4.2.1.2Columndsx1LineModeread-writecurrentT1 device operation mode. Valid for T1 only.
1.3.6.1.4.1.164.3.1.6.4.2.1.3Columndsx1dBTxGainread-writecurrentTransmit line Gain for T1 CSU line mode.
1.3.6.1.4.1.164.3.1.6.4.2.1.4Columndsx1RxSensitivityread-writecurrentLow Sensitivity is considered Short Haul while High Sensitivity is considered Long Haul. The actual values depend on the LIU. Examples: - E1: -12dB is consider…
1.3.6.1.4.1.164.3.1.6.4.2.1.5Columndsx1RestoreTimeread-writecurrentUsed to change the sync. algorithms to reduce the time required for the port to return to normal operation after a RED alarm. 'sec1' = Fast, 'sec10' = TR-6211,…
1.3.6.1.4.1.164.3.1.6.4.2.1.6Columndsx1TcFirstSignalread-writecurrentTrunk conditioning signal - value to be sent as a signal during the first 2.5 seconds after alarm detection. Range is 0x0..0xF. 0xFF is a NULL value. This vari…
1.3.6.1.4.1.164.3.1.6.4.2.1.7Columndsx1TcSignalread-writecurrentTrunk conditioning signal value after alarm detection. Range is 0x1..0xF for E1, and 0x0..0xF for T1. This variable is used also for Space Signaling Code (E1 a…
1.3.6.1.4.1.164.3.1.6.4.2.1.8Columndsx1TcPatternread-writecurrentTrunk conditioning data pattern to be sent upon a DS0 fail. Range is 0x0..0xFF. This variable used also for Out of Service Code.
1.3.6.1.4.1.164.3.1.6.4.2.1.9Columndsx1Scrambleread-writecurrentScrambling is an operation that randomizes the bits of the payload of the ATM cell by a polynom. This operation helps with the error detection mechanism of the…
1.3.6.1.4.1.164.3.1.6.4.2.1.10Columndsx1LineAdaptiveTimingModeread-writecurrentEnables end to end clock synchronization. Default value - off.
1.3.6.1.4.1.164.3.1.6.4.2.1.11Columndsx1TxClockSourceread-writecurrentThe source of Transmit Clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock…
1.3.6.1.4.1.164.3.1.6.4.2.1.12Columndsx1AisEnableread-writecurrentEnable/ disable AIS transmit when Ethernet cable (for TDMoIP) is out (disconnected).
1.3.6.1.4.1.164.3.1.6.4.2.1.13Columndsx1TsEchoCancelread-writecurrentThis parameter defines for each TS whether Echo-Cancellation is on. Each bit represents one TS as follow: First octet bit'0' = TS#1, bit'7' = TS#8, .. 2nd octe…
1.3.6.1.4.1.164.3.1.6.4.2.1.14Columndsx1EchoCancelerModuleread-onlycurrentThis parameter indicates whether echo-cancellation module exists for this line.
1.3.6.1.4.1.164.3.1.6.4.2.1.15Columndsx1PortFunctionread-writecurrentThis object determines the ATM Mode over the physical port. uni - The port will function as an ATM UNI. ces - The port will function as a CES. ima - The port w…
1.3.6.1.4.1.164.3.1.6.4.2.1.16Columndsx1PortMultiplierread-writecurrentThis object determines the data rate of each TS (Kbps units). This parameter is applicable for T1 only.
1.3.6.1.4.1.164.3.1.6.4.2.1.17Columndsx1LeasedLineread-writecurrentThis parameter defines whether Line mode is regular (non Leased Line mode) or transparent (Leased Line mode).
1.3.6.1.4.1.164.3.1.6.4.2.1.18Columndsx1CsuLoopread-writecurrentThis parameter defines where the CSU loop will be done: local - locally (by IPmux) towards the TDM device transparent - transferred to Remote Device that will …
1.3.6.1.4.1.164.3.1.6.4.2.1.19Columndsx1ClockSourceread-writecurrentThis entry specifies the source from which the clock will be taken. Refer to device specification for source Index
1.3.6.1.4.1.164.3.1.6.4.2.1.20Columndsx1OosSignalread-writecurrentThis parameter defines the value to be sent as a signal after alarm detection: 'Space' = both A and B signaling bits are forced to '0' during out-of-service pe…
1.3.6.1.4.1.164.3.1.6.4.2.1.21Columndsx1BundleNextIndexread-onlycurrentThis parameter indicates the Next free Bundle Index for this DS1 port.
1.3.6.1.4.1.164.3.1.6.4.2.1.22Columndsx1CRC6CalcModeread-writecurrentThis object determines the CRC6 Calculation mode. jtG704 =JT-G704 = the Japanese standard ituG704=ITU-G704 = the International standard This parameter is appli…
1.3.6.1.4.1.164.3.1.6.4.2.1.23Columndsx1SendUponFailread-writecurrentThis object determines which notification will be sent to the other side upon fail of another interface. In Ipmux14 the notification is sent upon failure of th…
1.3.6.1.4.1.164.3.1.6.7Nodeip2If
1.3.6.1.4.1.164.3.1.6.7.1Tableip2IfTablenot-accessiblecurrentChannels Configuration Table.
1.3.6.1.4.1.164.3.1.6.7.1.1Rowip2IfEntrynot-accessiblecurrentApplication layer configuration per link
1.3.6.1.4.1.164.3.1.6.7.1.1.1Columnip2IfChannelIndexread-onlycurrentThe channel index, which is actualy the bundle ID.
1.3.6.1.4.1.164.3.1.6.7.1.1.2Columnip2IfRowStatusread-createcurrentThis parameter allows NMS to create/delete entries of this table.
1.3.6.1.4.1.164.3.1.6.7.1.1.3Columnip2IfOperStatusread-onlycurrentThe actual link status. remoteFail - No Rx. localFail - No Tx. unavailable - No echo replay or replay with invalid code or when connection is in Test state. va…
1.3.6.1.4.1.164.3.1.6.7.1.1.4Columnip2IfAdminStatusread-createcurrentThe desired state of the link.
1.3.6.1.4.1.164.3.1.6.7.1.1.5Columnip2IfDestAddrread-createcurrentThe destination IP address.
1.3.6.1.4.1.164.3.1.6.7.1.1.6Columnip2IfNextHopread-createcurrentThe next hop to which the frame should be sent. Default value - 0.0.0.0. Upon setting the default value the frame is sent to the default Gateway.
1.3.6.1.4.1.164.3.1.6.7.1.1.7Columnip2IfDestPortread-createcurrentThe destination Bundle at the far-end device.
1.3.6.1.4.1.164.3.1.6.7.1.1.8Columnip2IfMacAddrread-createcurrentThe Destination MAC address of the next hop or destination station.
1.3.6.1.4.1.164.3.1.6.7.1.1.9Columnip2IfJitterBufferread-createcurrentThe maximum cell arrival jitter in 10 usec that the reassembly process will tolerate in the cell stream, without producing errors on the CBR service interface.…
1.3.6.1.4.1.164.3.1.6.7.1.1.10Columnip2IfTosread-createcurrentThe TOS (Type of Service) value: 0..255. In Vmux-2100/110 devices versions 3.1 and up, in Vmux-210 and in Vmux-4x0: LSB 8 bits - 00 00 00 XX will be used for S…
1.3.6.1.4.1.164.3.1.6.7.1.1.11Columnip2IfTDMBytesInFrameread-createcurrentThe number of TDM bytes to be placed in a single IP frame payload. For ip2IfTDMoIpMode = cesOverPsn this parameter indicates the number of IP frames, calculate…
1.3.6.1.4.1.164.3.1.6.7.1.1.12Columnip2IfVlanSupportread-createcurrentVLAN support (Tagging). no - No support to VLAN. yes - 4 VLAN bytes will be added to the frame.
1.3.6.1.4.1.164.3.1.6.7.1.1.13Columnip2IfVlanIdentifierread-createcurrentVLAN ID.
1.3.6.1.4.1.164.3.1.6.7.1.1.14Columnip2IfVlanFramePriorityread-createcurrentVLAN Frame priority.
1.3.6.1.4.1.164.3.1.6.7.1.1.15Columnip2IfExitPortread-createcurrentThis object determines to which external port the traffic will be sent. auto - the device will decide automatically the exit port. If there is an option for Tx…
1.3.6.1.4.1.164.3.1.6.7.1.1.16Columnip2IfVoiceOosread-createcurrentVoice Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0.
1.3.6.1.4.1.164.3.1.6.7.1.1.17Columnip2IfDataOosread-createcurrentData Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0.
1.3.6.1.4.1.164.3.1.6.7.1.1.18Columnip2IfBundleUsageread-onlycurrentThe Bundle Resource usage in Kbps.
1.3.6.1.4.1.164.3.1.6.7.1.1.19Columnip2IfOAMread-createcurrentThis parameter determine the OAM configuration. The LSB (Bit 0 the most right one) is used for OAM connectivity. Values: 0 = disable, 1= enable.
1.3.6.1.4.1.164.3.1.6.7.1.1.20Columnip2IfTDMoIpModeread-createcurrentThe TDMoIP Mode configuration. Static- means TS can Tx any time. dynamicLES - means TS can Tx only when line is enabled according to LES protocol. dynamicCAS -…
1.3.6.1.4.1.164.3.1.6.7.1.1.21Columnip2IfTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the current error-measurement period. If, for some reason, such as an adjustment in the system's…
1.3.6.1.4.1.164.3.1.6.7.1.1.22Columnip2IfValidIntervalsread-onlycurrentThe number of previous intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which …
1.3.6.1.4.1.164.3.1.6.7.1.1.23Columnip2IfFarEndTyperead-createcurrentThis object defines the type of the Far-End device. This data is important for signaling and DS0 format. For Vmux: e1 (2) value is used for a PBX in the Far En…
1.3.6.1.4.1.164.3.1.6.7.1.1.24Columnip2IfRdnStateread-onlycurrentThis object defines the role this bundle plays in the redundancy scheme: none(2) - means this bundle is not part of redundancy pair. primary/ secondary - means…
1.3.6.1.4.1.164.3.1.6.7.1.1.25Columnip2IfSourceAddrread-createcurrentSource IP Address of the bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.26Columnip2IfBandWidthread-createcurrentDefines the Bandwidth of the bundle. For TDM bundles - it is the Number of Time Slots in The Bundle. - For T1 the value will be: 1..24 - For E1 the value will …
1.3.6.1.4.1.164.3.1.6.7.1.1.27Columnip2IfMeasuredSilenceread-onlycurrentThis object shows the percentage of Silence that was measured by the device for the current bundle in the transmitted payload. Relevant values: 0..100, 255. De…
1.3.6.1.4.1.164.3.1.6.7.1.1.28Columnip2IfPayloadTyperead-createcurrentThis object defines the TDMoIP payload type.
1.3.6.1.4.1.164.3.1.6.7.1.1.29Columnip2IfProtocolVersionread-createcurrentThis object defines the TDMoIP protocol Version.
1.3.6.1.4.1.164.3.1.6.7.1.1.30Columnip2IfTdmBackUpNextHopread-createcurrentDefines the TDM bundle default router in case there was a switch from the Primary Link (for example an ETH port) to a TDM backup Link like E1, T1 or Serial Lin…
1.3.6.1.4.1.164.3.1.6.7.1.1.31Columnip2IfOosTxEnableread-createcurrentThis object defines whether OOS will be Transmitted. Note that for IPmux1000 the Lbit is always sent, but the OOS will be sent according to user selection in t…
1.3.6.1.4.1.164.3.1.6.7.1.1.32Columnip2IfConnCheckPktFrequencyread-createcurrentTime in sec. between 2 Bundle Connectivity Check packets. Valid values: 0..60. 0 = Not Applicable.
1.3.6.1.4.1.164.3.1.6.7.1.1.33Columnip2IfConnPktTimeOutCyclesread-createcurrentNo. of cycles the agent will send Bundle Connectivity packets without receiving a response from the remote device before declaring that the bundle connection t…
1.3.6.1.4.1.164.3.1.6.7.1.1.34Columnip2IfMfRelayread-createcurrentMulti Frequency Signaling Detection.
1.3.6.1.4.1.164.3.1.6.7.1.1.35Columnip2IfTxGainread-createcurrentTransmit gain in dBm.
1.3.6.1.4.1.164.3.1.6.7.1.1.36Columnip2IfSuperTandemread-createcurrentThe Super Tandem feature provides end to end compression over multiple hops, solving the double compression problem detected in Voice compressing systems. The …
1.3.6.1.4.1.164.3.1.6.7.1.1.37Columnip2IfSrcPortread-createcurrentThe source Bundle at the local device, this parameter used for cases where there is no match between ip2IfChannelIndex and the Source Bundle ID.
1.3.6.1.4.1.164.3.1.6.7.1.1.38Columnip2IfModemCallsread-createcurrentThis MIB object shows whether Modem Calls are enabled via the bundle. relay option (3) means that the bundle will send to the network only modulated data.
1.3.6.1.4.1.164.3.1.6.7.1.1.39Columnip2IfMinPulseWidthread-createcurrentIndicates the minimum width in milliseconds of the MF (Multi Frequency) tone transmitted by the switch. Valid values: 45-300 msec. notApplicable=0.
1.3.6.1.4.1.164.3.1.6.7.1.1.40Columnip2IfMinPowerLevelread-createcurrentIndicates the minimum power level in dBm of the MF (Multi Frequency) tone transmitted by the switch. Valid values: -1...-35 dBm.
1.3.6.1.4.1.164.3.1.6.7.1.1.41Columnip2IfEchoCancelerread-createcurrentEcho canceler activation.
1.3.6.1.4.1.164.3.1.6.7.1.1.42Columnip2IfCodingLawread-createcurrentThis attribute indicates the Method/Law for decoding/encoding the voice information. aLaw(1) is the standard Law for E1 links. uLaw(2) is the standard Law for …
1.3.6.1.4.1.164.3.1.6.7.1.1.43Columnip2IfCustomToneDetectread-createcurrentCustom Tone Detection (COT) is a Control operation of a 2Khz tone detector. This tone is sent between PBX devices in order to check that the line status is OK.…
1.3.6.1.4.1.164.3.1.6.7.1.1.44Columnip2IfCallerIdDelayread-createcurrentTime in msec between CLID (Caller ID) signal detection on the line and CLID signal transmission. The CLID must be sent between ringing signals and the value of…
1.3.6.1.4.1.164.3.1.6.7.1.1.45Columnip2IfConnectivityModeread-createcurrentThis MIB object shows whether to send Pings or OAM frames over the bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.46Columnip2IfClockSourceEnableread-createcurrentThis MIB object defines whether this bundle can be a clock source.
1.3.6.1.4.1.164.3.1.6.7.1.1.47Columnip2IfNetworkTyperead-createcurrentThis MIB object defines the network over which the Bundle PSN (Packet Switching Network)is transported. In Gmux2000: ipComprHeader indicates proprietary compre…
1.3.6.1.4.1.164.3.1.6.7.1.1.48Columnip2IfMplsRxLabelEnableread-createcurrentThis MIB object defines whether there is user defined inner (Rx.) label for this Bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.49Columnip2IfMplsRxLabelread-createcurrentThis MIB object defines the MPLS Rx. Label for this Bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.50Columnip2IfMplsTxLabelEnableread-createcurrentThis MIB object defines whether there is user defined outer (Tx.) label for this Bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.51Columnip2IfMplsTxLabelread-createcurrentThis MIB object defines the MPLS Tx. Label for this Bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.52Columnip2IfMplsTxExpBitsread-createcurrentThe MPLS Network priority (EXP bits) used for this bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.53Columnip2IfMfcSpoofingread-createcurrentThis MIB object defines whether the MFC (Multi Frequency Compelled) protocol spoofing will exist in the bundle. When the MFC Spoofing is used, the Local and Re…
1.3.6.1.4.1.164.3.1.6.7.1.1.54Columnip2IfToneAckIntervalread-createcurrentTime Interval in milli seconds from the time a Vmux sends tone/s to a local PBX until it receives an acknowledgement from this PBX. Valid values: 60...400 in s…
1.3.6.1.4.1.164.3.1.6.7.1.1.55Columnip2IfNextHopTyperead-createcurrentThis MIB object defines the Bundle next Hop Address Type.
1.3.6.1.4.1.164.3.1.6.7.1.1.56Columnip2IfNoiseLevelForVADread-createcurrentThis object defines the Level of Noise on the line, the Voice Activation Detector (VAD) will have to handle.
1.3.6.1.4.1.164.3.1.6.7.1.1.57Columnip2IfClockPreferencesread-createcurrentThe Clock preferences: accurateness (2) = Accurate clock is more important than Constant Delay. constantDelay (3)= Constant Delay is more important than Accura…
1.3.6.1.4.1.164.3.1.6.7.1.1.58Columnip2IfConnectionModeread-createcurrentThe Connection Mode: tdmOIpCe (2) = TDMOiP (CE) = Circuit Emulation. tdmOIpCv (3)= TDMOiP (CV) = Compressed Voice.
1.3.6.1.4.1.164.3.1.6.7.1.1.59Columnip2IfRingBackread-createcurrentEnables or disable Ring Back.
1.3.6.1.4.1.164.3.1.6.7.1.1.60Columnip2IfReversePolarityread-createcurrentEnables or disable Reverse polarity synthesis.
1.3.6.1.4.1.164.3.1.6.7.1.1.61Columnip2IfPulseMeterread-createcurrentEnables or disable Pulse metering synthesis.
1.3.6.1.4.1.164.3.1.6.7.1.1.62Columnip2IfPulseMeterFreqread-createcurrentFrequency of synthesized pulse metering for this bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.63Columnip2IfPulseMeterPeriodread-createcurrentDuration of synthesized pulse metering. current values are: 100-250.
1.3.6.1.4.1.164.3.1.6.7.1.1.64Columnip2IfOnHookDetectread-createcurrentEnables or disable immediate reaction to On-Hook bits from network in Ringing.
1.3.6.1.4.1.164.3.1.6.7.1.1.65Columnip2IfComfortNoiseGenread-createcurrentEnable or disable Comfort Noise Generation (CNG). When this parameter is enabled and no voice payload exists on the line for some time period during the call (…
1.3.6.1.4.1.164.3.1.6.7.1.1.66Columnip2IfExitChannelread-createcurrentThe channelized bundle that the voice bundle exits through. In Gmux2000 it is the ifIndex of the Channelized Bundle (sub-channel) that the Voice Bundle exits t…
1.3.6.1.4.1.164.3.1.6.7.1.1.67Columnip2IfMaxVBDModemCallsread-createcurrentMaximum VBD modem calls for this bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.68Columnip2IfMaxRelayModemCallsread-createcurrentMaximum Relay modem calls for this bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.69Columnip2IfCustomToneFrequencyread-createcurrentThis is the frequency of the Custom Tone that is sent between PBXs in order to check that the line status is OK. When the Custom Tone Detection is enabled the …
1.3.6.1.4.1.164.3.1.6.7.1.1.70Columnip2IfVadMethodread-createcurrentVoice Activity Detection (VAD) method. proprietary (2) - non standard VAD based only on power measurement. It is very sensitive to background noise. internalIT…
1.3.6.1.4.1.164.3.1.6.7.1.1.71Columnip2IfRxGainread-createcurrentReceive gain in dBm.
1.3.6.1.4.1.164.3.1.6.7.1.1.72Columnip2IfCallerIDTyperead-createcurrentCaller ID Type used by the DSP for this bundle. Bellcore type is used by the American method. V.23 type is used by the European method.
1.3.6.1.4.1.164.3.1.6.7.1.1.73Columnip2IfPeerAddrTyperead-createcurrentThis MIB object defines the peer Address Type.
1.3.6.1.4.1.164.3.1.6.7.1.1.74Columnip2IfVbdRateread-createcurrentVoice Band Data (VBD) rate for this bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.75Columnip2IfDtmfDetectionread-createcurrentEnable/Disable DTMF (Dual Tone Multi Frequency) detectors for this bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.76Columnip2IfNlpCutoffLevelread-createcurrentNon Linear Processor (NLP) Cutoff Level for this bundle. This parameter is used by the echo canceller. It is the maximum absolute linear PCM amplitude of the n…
1.3.6.1.4.1.164.3.1.6.7.1.1.77Columnip2IfDtdErlRatioCutoffQ3read-createcurrentThe DTD ERL cutoff level is used in order to determine whether the near-end is talking or not. This parameter is used by the echo canceller when echo exists an…
1.3.6.1.4.1.164.3.1.6.7.1.1.78Columnip2IfCASRedundancyread-createcurrentEnable/Disable CAS signaling redundancy. This parameter is useful when there are problems with the network and applicable only for CAS signaling: E1-MF (G.732S…
1.3.6.1.4.1.164.3.1.6.7.1.1.79Columnip2IfBundleSensitivityread-createcurrentDenotes if the bundle is sensitive to delay in the network, or is sensitive to data errors in the network. Voice bundles are sensitive to delay; Non-voice bund…
1.3.6.1.4.1.164.3.1.6.7.1.1.80Columnip2IfOAMBundleIdentread-createcurrentDenotes if an OAM bundle is identified according to the Bundle Number (0x3fff), or according to the value of the first nibble in the VCCV control word sent in …
1.3.6.1.4.1.164.3.1.6.7.1.1.81Columnip2IfMaxTxQueueread-createcurrentMax Tx Queue buffer size, measured in msec (milliseconds). Low buffer size may cause the buffer to overflow and discard packets in case of burst of packets on …
1.3.6.1.4.1.164.3.1.6.7.1.1.82Columnip2IfMaxGprsTxQueueread-createcurrentMax GPRS Tx Queue buffer size, measured in msec (milliseconds). Low buffer size may cause the buffer to overflow and discard packets in case of burst of packet…
1.3.6.1.4.1.164.3.1.6.7.1.1.83Columnip2IfV23HDread-createcurrentThis parameter shows whether V.23 Half Duplex Modem Protocol is enabled on the bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.84Columnip2IfModemProtocolModeread-createcurrentThis octet string contains the mode of each Modem Protocol used on the bundle. For each protocol one octet will be used. Octet #1 will be used for V.22 Protoco…
1.3.6.1.4.1.164.3.1.6.7.1.1.85Columnip2IfCdisCngDetectionTimeread-createcurrentWhen working with CDIS (Call DIScrimination method) or CNG (Comfort Noise Generation): The time in msec that the device will detect 1100Hz & 2100Hz signals on …
1.3.6.1.4.1.164.3.1.6.7.1.1.86Columnip2IfSuperTandemBitMaskread-createcurrentThis MIB object enables controlling the Time Slot/Channel rate. Valid values: 1 - FF HEX Each BIT represents 1/8 of the TS. Example: 7E (0111 1110) means that …
1.3.6.1.4.1.164.3.1.6.7.1.1.87Columnip2IfVbdSwitchbackTimeread-createcurrentTime in msec required for the DSP to switch back from VBD (Voice Band Data) to Voice. For Vmux: the values will be in steps of 30 msec.
1.3.6.1.4.1.164.3.1.6.7.1.1.88Columnip2IfCallerIdTxGainread-createcurrentThe gain value in dBm units used for transmitting the Caller ID signal on the bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.89Columnip2IfCallerIdRxGainread-createcurrentThe gain value in dBm units of the Caller ID signal received on the bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.90Columnip2IfUdpMuxMethodread-createcurrentThis parameter determines according to which field the multiplexing is made: srcPort (2) - multiplexing according to the UDP Source Port (Dest=0x085e). This sh…
1.3.6.1.4.1.164.3.1.6.7.1.1.91Columnip2IfCallerIdDetectionread-createcurrentEnable/Disable Caller ID Detection for this bundle.
1.3.6.1.4.1.164.3.1.6.7.1.1.92Columnip2IfWapread-createcurrentEnable/Disable WAP (Wireless Application Protocol) for this bundle. WAP allows users to access the internet from wireless devices.
1.3.6.1.4.1.164.3.1.6.7.2Scalarip2IfTDMFrameBytesread-writecurrentThe number of TDM bytes to be placed in a single IP frame payload.
1.3.6.1.4.1.164.3.1.6.7.3Scalarip2IfTosValueread-writecurrentThe TOS value to write in the IP frame.
1.3.6.1.4.1.164.3.1.6.7.4Scalarip2IfVlanTaggingread-writecurrentVLAN support. no - No support to VLAN. yes - 4 VLAN bytes will be added to the frame.
1.3.6.1.4.1.164.3.1.6.7.5Scalarip2IfVlanIDread-writecurrentVLAN ID.
1.3.6.1.4.1.164.3.1.6.7.6Scalarip2IfVlanPriorityread-writecurrentFrame priority.
1.3.6.1.4.1.164.3.1.6.7.7Tableip2IfStatTablenot-accessiblecurrentChannels (Bundles) Statistics Table.
1.3.6.1.4.1.164.3.1.6.7.7.1Rowip2IfStatEntrynot-accessiblecurrentIP Statistics per bundle
1.3.6.1.4.1.164.3.1.6.7.7.1.1Columnip2IfStatChIndexread-onlycurrentThe channel index, which is actualy the bundle ID.
1.3.6.1.4.1.164.3.1.6.7.7.1.2Columnip2IfStatSeqErrorsread-onlycurrentNumber of events that the sequence number of an incoming Frame causes a transition from the 'sync' state to the 'out of sequence' state.
1.3.6.1.4.1.164.3.1.6.7.7.1.3Columnip2IfStatBufUnderflowsread-onlycurrentNumber of events that the buffer underflows. This records the count of the number of events the Receive (Eth to TDM) buffer underflows. In the case of a contin…
1.3.6.1.4.1.164.3.1.6.7.7.1.4Columnip2IfStatBufOverflowsread-onlycurrentNumber of events that the buffer overflows. This records the count of the number of events the Receive (Eth to TDM) buffer overflows.
1.3.6.1.4.1.164.3.1.6.7.7.1.5Columnip2IfStatTxOnTimeIntervalread-onlycurrentNumber of frames that were transmitted due to time interval elapse. The user can choose to Tx the Frame when it reaches the Max size or when the packetizing ti…
1.3.6.1.4.1.164.3.1.6.7.7.1.6Columnip2IfStatTxOnMaxSizeread-onlycurrentNumber of frames that were transmitted due to reaching max. frame size. The user can choose to Tx the Frame when it reaches the Max size or when the packetizin…
1.3.6.1.4.1.164.3.1.6.7.7.1.7Columnip2IfStatRxSignalingread-onlycurrentNumber of signaling frames that were received.
1.3.6.1.4.1.164.3.1.6.7.7.1.8Columnip2IfStatRxVoiceread-onlycurrentNumber of voice frames that were received.
1.3.6.1.4.1.164.3.1.6.7.7.1.9Columnip2IfStatRxHdlcread-onlycurrentNumber of HDLC frames that were received.
1.3.6.1.4.1.164.3.1.6.7.7.1.10Columnip2IfStatTxSignalingread-onlycurrentNumber of signaling frames that were transmitted.
1.3.6.1.4.1.164.3.1.6.7.7.1.11Columnip2IfStatTxVoiceread-onlycurrentNumber of voice frames that were transmitted.
1.3.6.1.4.1.164.3.1.6.7.7.1.12Columnip2IfStatTxHdlcread-onlycurrentNumber of HDLC frames that were transmitted.
1.3.6.1.4.1.164.3.1.6.7.7.1.13Columnip2IfStatRdnFlipread-onlycurrentNumber of redundancy flips occured. This parameter counts only flips from this bundle to the other bundle in the redundancy couple.
1.3.6.1.4.1.164.3.1.6.7.7.1.14Columnip2IfFarEndTdmStatusread-onlycurrentThis variable indicates the Status of the Far-End TDM Line. It contains failure state information. The variable is a bit map represented as a sum, therefore, i…
1.3.6.1.4.1.164.3.1.6.7.7.1.15Columnip2IfStatPsnTxFramesread-onlycurrentNumber of frames that were transmitted to PSN.
1.3.6.1.4.1.164.3.1.6.7.7.1.16Columnip2IfStatPsnRxFramesread-onlycurrentNumber of frames that were recieved from PSN.
1.3.6.1.4.1.164.3.1.6.7.7.1.17Columnip2IfStatMinJittBufLevelread-onlycurrentThe Minimum jitter buffer level (in msec).
1.3.6.1.4.1.164.3.1.6.7.7.1.18Columnip2IfStatMaxJittBufLevelread-onlycurrentThe Maximum jitter buffer level (in msec).
1.3.6.1.4.1.164.3.1.6.7.7.1.19Columnip2IfStatRecommendedJittBufSizeread-onlycurrentThe Recommended jitter buffer Size (in msec). 0= not applicable.
1.3.6.1.4.1.164.3.1.6.7.7.1.20Columnip2IfStatPsnSeqErrorsread-onlycurrentNumber of times that the sequence number of an incoming Frame indicates Loss of Frame or Out of order occured in PSN.
1.3.6.1.4.1.164.3.1.6.7.7.1.21Columnip2IfStatPsnReorderFramesread-onlycurrentNumber of times that Frames had been reordered in PSN.
1.3.6.1.4.1.164.3.1.6.7.7.1.22Columnip2IfStatMinRoundTripDelayread-onlycurrentThe minimum Round Trip delay (in msec). 0= not applicable.
1.3.6.1.4.1.164.3.1.6.7.7.1.23Columnip2IfStatMaxRoundTripDelayread-onlycurrentThe maximum Round Trip delay (in msec). 0= not applicable.
1.3.6.1.4.1.164.3.1.6.7.7.1.24Columnip2IfStatAvrRoundTripDelayread-onlycurrentThe avarage Round Trip delay (in msec). 0= not applicable.
1.3.6.1.4.1.164.3.1.6.7.7.1.25Columnip2IfStatFrameTrackDupDropread-onlycurrentThe number of packets dropped due to being duplicated. (duplicated packet means a packet that has the same sequential number as a packet being received previou…
1.3.6.1.4.1.164.3.1.6.7.7.1.26Columnip2IfStatFrameTrackMissingread-onlycurrentThe number of packets that are missing. (Missing packet means an expected packet- according to the current sequential number - that was not received).
1.3.6.1.4.1.164.3.1.6.7.7.1.27Columnip2IfStatFrameTrackLongSerMissread-onlycurrentThe longest series of consecutive missing sequential numbers. Missing sequential numbers represent missing packets that was expected to be received successivel…
1.3.6.1.4.1.164.3.1.6.7.7.1.28Columnip2IfStatTxMeasuredSilenceread-onlycurrentThis object shows the percentage of Silence that was measured by the device for the current bundle in the transmitted payload. Relevant values: 0..100, 255. De…
1.3.6.1.4.1.164.3.1.6.7.7.1.29Columnip2IfStatRxMeasuredSilenceread-onlycurrentThis object shows the percentage of Silence that was measured by the device for the current bundle in the received payload. Relevant values: 0..100, 255. Defau…
1.3.6.1.4.1.164.3.1.6.7.7.1.30Columnip2IfStatHdlcCrcErrread-onlycurrentThis counter indicates the number of received HDLC frames with CRC errors.
1.3.6.1.4.1.164.3.1.6.7.7.1.31Columnip2IfStatHdlcAlignErrread-onlycurrentThis counter indicates the number of received HDLC frames with alignment errors.
1.3.6.1.4.1.164.3.1.6.7.7.1.32Columnip2IfStatHdlcOversizeread-onlycurrentThis counter indicates the number of received HDLC frames longer than 1470.
1.3.6.1.4.1.164.3.1.6.7.7.1.33Columnip2IfStatHdlcUndersizeread-onlycurrentThis counter indicates the number of received HDLC frames shorter than 4.
1.3.6.1.4.1.164.3.1.6.7.7.1.34Columnip2IfStatHdlcAbortread-onlycurrentThis counter indicates the number of received HDLC frames with abort indication.
1.3.6.1.4.1.164.3.1.6.7.7.1.35Columnip2IfStatRxCorrectFramesread-onlycurrentNumber of received correct frames.
1.3.6.1.4.1.164.3.1.6.7.7.1.36Columnip2IfStatHdlcErroredFramesread-onlycurrentNumber of received errored HDLC frames.
1.3.6.1.4.1.164.3.1.6.7.8Scalarip2IfRateLimitread-writecurrentThe maximum rate permitted to transfer via the network portin Mbps.
1.3.6.1.4.1.164.3.1.6.7.9Tableip2IfPortTablenot-accessiblecurrentPort Table.
1.3.6.1.4.1.164.3.1.6.7.9.1Rowip2IfPortEntrynot-accessiblecurrentApplication layer configuration per Port
1.3.6.1.4.1.164.3.1.6.7.9.1.1Columnip2IfPortIndexread-onlycurrentThe Port index, which is actualy the ifIndex.
1.3.6.1.4.1.164.3.1.6.7.9.1.2Columnip2IfPortUsageread-onlycurrentThis parameter indicates the usage of the port (percents).
1.3.6.1.4.1.164.3.1.6.7.9.1.3Columnip2IfPortMaskread-writecurrentThis parameter defines whether Agent will mask port's alarms and statistics or not.
1.3.6.1.4.1.164.3.1.6.7.9.1.4Columnip2IfPortTotalThroughputread-onlycurrentThis parameter indicates the total Throughput of the port in bps.
1.3.6.1.4.1.164.3.1.6.7.10Tableip2IfCurrentStatTablenot-accessiblecurrentChannels (Bundles) Current Statistics Table.
1.3.6.1.4.1.164.3.1.6.7.10.1Rowip2IfCurrentStatEntrynot-accessiblecurrentIP Current Statistics per bundle
1.3.6.1.4.1.164.3.1.6.7.10.1.1Columnip2IfCurrentStatSeqErrorsread-onlycurrentNumber of seconds that the sequence number of an incoming Frame causes a transition from the 'sync' state to the 'out of sequence' state in the current interva…
1.3.6.1.4.1.164.3.1.6.7.10.1.2Columnip2IfCurrentStatBufUnderflowsread-onlycurrentNumber of seconds that the buffer underflows in the current interval. This records the count of the number of seconds the Receive (Eth to TDM) buffer underflow…
1.3.6.1.4.1.164.3.1.6.7.10.1.3Columnip2IfCurrentStatBufOverflowsread-onlycurrentNumber of seconds that the buffer overflows in the current interval. This records the count of the number of seonds the Receive (Eth to TDM) buffer overflows i…
1.3.6.1.4.1.164.3.1.6.7.10.1.4Columnip2IfCurrentStatMaxDelayVarread-onlycurrentThe maximum deviation from the center of the buffer (in msec) for the current interval.
1.3.6.1.4.1.164.3.1.6.7.10.1.5Columnip2IfCurrentStatMinJittBufLevelread-onlycurrentThe Minimum jitter buffer level (in msec) for the current interval.
1.3.6.1.4.1.164.3.1.6.7.10.1.6Columnip2IfCurrentStatMaxJittBufLevelread-onlycurrentThe Maximum jitter buffer level (in msec) for the current interval.
1.3.6.1.4.1.164.3.1.6.7.10.1.7Columnip2IfCurrentStatTxErrFrameSecread-onlycurrentThe number of seconds in which errored frames were transmitted during the current interval. The error may be one of the following: CRC error, Alignment error, …
1.3.6.1.4.1.164.3.1.6.7.11Tableip2IfIntervalStatTablenot-accessiblecurrentChannels (Bundles) Interval Statistics Table.
1.3.6.1.4.1.164.3.1.6.7.11.1Rowip2IfIntervalStatEntrynot-accessiblecurrentIP Interval Statistics per bundle
1.3.6.1.4.1.164.3.1.6.7.11.1.1Columnip2IfIntervalStatIndexread-onlycurrentThe Interval index, which is actualy the Interval number.
1.3.6.1.4.1.164.3.1.6.7.11.1.2Columnip2IfIntervalStatSeqErrorsread-onlycurrentNumber of seconds that the sequence number of an incoming Frame causes a transition from the 'sync' state to the 'out of sequence' state in the selected interv…
1.3.6.1.4.1.164.3.1.6.7.11.1.3Columnip2IfIntervalStatBufUnderflowsread-onlycurrentNumber of seconds that the buffer underflows in the selected interval. This records the count of the number of seconds the Receive (Eth to TDM) buffer underflo…
1.3.6.1.4.1.164.3.1.6.7.11.1.4Columnip2IfIntervalStatBufOverflowsread-onlycurrentNumber of seconds that the buffer overflows in the selected interval. This records the count of the number of seconds the Receive (Eth to TDM) buffer overflows…
1.3.6.1.4.1.164.3.1.6.7.11.1.5Columnip2IfIntervalStatMaxDelayVarread-onlycurrentThe maximum size of the buffer (in 10's of usec) in the selected interval.
1.3.6.1.4.1.164.3.1.6.7.11.1.6Columnip2IfIntervalStatMinJittBufLevelread-onlycurrentThe Minimum jitter buffer level (in msec) for the selected interval.
1.3.6.1.4.1.164.3.1.6.7.11.1.7Columnip2IfIntervalStatMaxJittBufLevelread-onlycurrentThe Maximum jitter buffer level (in msec) for the selected interval.
1.3.6.1.4.1.164.3.1.6.7.11.1.8Columnip2IfIntervalStatTxErrFrameSecread-onlycurrentThe number of seconds in which errored frames were transmitted during the selected interval. The error may be one of the following: CRC error, Alignment error,…
1.3.6.1.4.1.164.3.1.6.7.12Scalarip2IfLogEventsread-writecurrentThis parameter defines whether all Jitter Buffer and Sequence Number events will enter to Log File, or enter those events to Log file in one minute steps.
1.3.6.1.4.1.164.3.1.6.7.13Scalarip2IfEthSwitchModeread-writecurrentThis parameter defines whether Eth Switch is in VLAN Tagged mode.
1.3.6.1.4.1.164.3.1.6.8NodebroadbandIf
1.3.6.1.4.1.164.3.1.6.8.1NodebdbandConfig
1.3.6.1.4.1.164.3.1.6.8.1.1TableprtBdbandIndTablenot-accessiblecurrentThe Indication Signal table.
1.3.6.1.4.1.164.3.1.6.8.1.1.1RowprtBdbandIndEntrynot-accessiblecurrentAn entry in the Indication Signal table.
1.3.6.1.4.1.164.3.1.6.8.1.1.1.1ColumnprtBdbandCnfgIdxread-onlycurrentThis object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Ag…
1.3.6.1.4.1.164.3.1.6.8.1.1.1.2ColumnprtBdbandIdxread-onlycurrentThis object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.
1.3.6.1.4.1.164.3.1.6.8.1.1.1.3ColumnprtBdbandIndSigread-onlycurrentThis object indicates a unique Indication Signal. ais(1) = AIS = Alarm Indication Signal. rdi(2) = RDI = Remote Defect Indication.
1.3.6.1.4.1.164.3.1.6.8.1.1.1.4ColumnprtBdbandIndEventread-onlycurrentThis object indicates a unique Event that can cause the Indication Signal. slm(2) = SLM = Signal Label Mismatch eed(4) = EED = Excessive Error Defect pathTrace…
1.3.6.1.4.1.164.3.1.6.8.1.1.1.5ColumnprtBdbandIndSigEnableread-createcurrentThis object allows user to define if the event specified by prtBdbandIndEvent will cause creation of the Indication Signal specified by prtBdbandIndSig or not.…
1.3.6.1.4.1.164.3.1.6.8.1.1.1.6ColumnprtBdbandRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.3.1.6.8.1.2TableprtPhyConfigTablenot-accessiblecurrentThe Phy Config table. Used now for Phy25.6 Mbps.
1.3.6.1.4.1.164.3.1.6.8.1.2.1RowprtPhyConfigEntrynot-accessiblecurrentAn entry in the Phy Config table.
1.3.6.1.4.1.164.3.1.6.8.1.2.1.1ColumnprtPhyTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the current error-measurement period.
1.3.6.1.4.1.164.3.1.6.8.1.2.1.2ColumnprtPhyValidIntervalsread-onlycurrentThe number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in …
1.3.6.1.4.1.164.3.1.6.8.2NodeprtPhyPerfHistory
1.3.6.1.4.1.164.3.1.6.8.2.1TableprtPhyCurrentTablenot-accessiblecurrentThe 25.6 Mbps Section/Line Current table.
1.3.6.1.4.1.164.3.1.6.8.2.1.1RowprtPhyCurrentEntrynot-accessiblecurrentAn entry in the 25.6 Mbps Line Current table. ifIndex of the line 25.6 Mbps layer of type 25.6 Mbps.
1.3.6.1.4.1.164.3.1.6.8.2.1.1.1ColumnprtPhyCurrentLOSread-onlycurrentThe counter associated with the number of Loss Of Sync seconds, encountered by a 25.6 Mbps interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.8.2.1.1.2ColumnprtPhyCurrentLSVread-onlycurrentThe counter associated with the number of Line symbol violation seconds, encountered by a 25.6 Mbps interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.8.2.1.1.3ColumnprtPhyCurrentUASread-onlycurrentThe counter associated with the number of UAS encountered by a 25.6 Mbps interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.8.2.1.1.4ColumnprtPhyCurrentSESread-onlycurrentThe counter associated with the number of SES encountered by a 25.6 Mbps interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.8.2.1.1.5ColumnprtPhyCurrentESread-onlycurrentThe number of Errored Seconds, encountered by a 25.6 Mbps interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.8.2.1.1.6ColumnprtPhyCurrentStatusread-onlycurrentThe statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out.
1.3.6.1.4.1.164.3.1.6.8.2.1.1.7ColumnprtPhyCurrentLOFread-onlycurrentThe number of Loss of Frames, encountered by an interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.8.2.2TableprtPhyIntervalTablenot-accessiblecurrentThe Line Interval table.
1.3.6.1.4.1.164.3.1.6.8.2.2.1RowprtPhyIntervalEntrynot-accessiblecurrentAn entry in the 25.6 Mbps Line Interval table. ifIndex of the line 25.6 Mbps layer of type 25.6 Mbps.
1.3.6.1.4.1.164.3.1.6.8.2.2.1.1ColumnprtPhyIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.3.1.6.8.2.2.1.2ColumnprtPhyIntervalLOSread-onlycurrentThe counter associated with the number of Loss Of Sync seconds , encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals.
1.3.6.1.4.1.164.3.1.6.8.2.2.1.3ColumnprtPhyIntervalLSVread-onlycurrentThe counter associated with the number of line symbol violation seconds , encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute …
1.3.6.1.4.1.164.3.1.6.8.2.2.1.4ColumnprtPhyIntervalUASread-onlycurrentThe counter associated with the number of UAS encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals.
1.3.6.1.4.1.164.3.1.6.8.2.2.1.5ColumnprtPhyIntervalSESread-onlycurrentThe counter associated with the number of SES encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals.
1.3.6.1.4.1.164.3.1.6.8.2.2.1.6ColumnprtPhyIntervalESread-onlycurrentThe number of Errored Seconds, encountered by a 25.6 Mbps interface in one of the previous 96, individual 15 minute intervals.
1.3.6.1.4.1.164.3.1.6.8.2.2.1.7ColumnprtPhyIntervalStatusread-onlycurrentThe statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out.
1.3.6.1.4.1.164.3.1.6.8.2.2.1.8ColumnprtPhyIntervalLOFread-onlycurrentThe number of Loss of Frames, encountered by an interface in one of the previous 96, individual 15 minute intervals.
1.3.6.1.4.1.164.3.2NodemuxHub
1.3.6.1.4.1.164.3.2.0IdentitymuxHubEventscurrentThe events for .
1.3.6.1.4.1.164.3.2.0.1NotificationalarmsTrapcurrentThis trap is sent whenever alarm occurs in the agent.
1.3.6.1.4.1.164.3.2.0.2NotificationsanityTrapcurrentThis trap is sent after a data base update. It returns the sanity result status and the configuration no. checked. If the result is of Flip DB Sanity Check, th…
1.3.6.1.4.1.164.3.2.0.3NotificationcnfgFlipTrapcurrentThis trap is sent upon change of the active Configuration DB. Attached, is the new active Configuration no.
1.3.6.1.4.1.164.3.2.0.4NotificationflipDbChangeTrapcurrentThis trap is sent upon change of the active Flip tables (Flip DB).
1.3.6.1.4.1.164.3.2.0.5NotificationstatusChangedTrapcurrentThis trap is sent upon any change of the LEDs status.
1.3.6.1.4.1.164.3.2.1NodeagnMux
1.3.6.1.4.1.164.3.2.2NodemdlMux
1.3.6.1.4.1.164.3.2.2.1NodecnfgMdlMux
1.3.6.1.4.1.164.3.2.2.1.1NodemdlPbxFramerCnfg
1.3.6.1.4.1.164.3.2.2.1.1.1TablemdlPbxFramerCnfgTablenot-accessiblecurrentThis table contains parameters relevant to a module belonging to a digital voice system, except mdlPbxFraEnhEcho which is relevant also for analog cards.
1.3.6.1.4.1.164.3.2.2.1.1.1.1RowmdlPbxFramerCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.2.1.1.1.1.1ColumnmdlPbxFraCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.2.1.1.1.1.2ColumnmdlPbxFraSltIdxread-onlycurrentThe slot relevant to this module.
1.3.6.1.4.1.164.3.2.2.1.1.1.1.3ColumnmdlPbxFraEnhEchoread-writecurrentRefers to external ports of an analogue module and to the internal ports of the other mvc4 types of modules. ms16(3) means that the four voice ports have enhan…
1.3.6.1.4.1.164.3.2.2.1.1.1.1.4ColumnmdlPbxFraTSGroupAssread-writecurrentIn case of T1 modules: group1=(1,2,3,4), ...., group6=(21,22,23,24) while in case of E1 modules: - If prtExPh1MlLineType=g732sE1 or g732sE1CRC: group1=(1,2,3,4…
1.3.6.1.4.1.164.3.2.2.1.1.1.1.5ColumnmdlPbxFraSignalModeread-writecurrentRefers to the signaling mode of the Framer module. tieTrunk(2), tieInvert(3), casTrans(4) are standard coding of the signaling protocol. casTrans(4) is Channel…
1.3.6.1.4.1.164.3.2.2.1.1.1.1.6ColumnmdlPbxFraSignalVectorread-writecurrentIn the case of mdlPbxFraSignalMode = userDefined(5), this field defines the A,B,C Bits. D bit is supplied for future versions. Bit 1 = Bit A ON Hook - Local Bi…
1.3.6.1.4.1.164.3.2.2.1.1.1.1.7ColumnmdlPbxFraSignalMaskread-writecurrentIn the case of mdlPbxFraSignalMode = userDefined(5), this field defines the 'don't care' A,B,C Bits. D bit is supplied for future versions. Bit 1 = Bit A ON Ho…
1.3.6.1.4.1.164.3.2.2.1.1.1.1.8ColumnmdlPbxFraFramerSlotread-writecurrentSlot where is sitting the Framer.
1.3.6.1.4.1.164.3.2.2.1.1.1.1.9ColumnmdlPbxFraSignalingread-writecurrentSignaling - describes the way the signaling ABCD bits pass from the local extension to the remote extension and vice-versa. endToEnd = the signaling ABCD bits …
1.3.6.1.4.1.164.3.2.2.1.1.1.1.10ColumnmdlPbxFraTransSigTsread-writecurrentThis is the Time Slot that is used for Transparent CCS signaling. The values of this TS are 1-24 for T1 & 1-31 for E1. The default for E1 is 16 & for T1 it is …
1.3.6.1.4.1.164.3.2.2.1.2TablemdlProtIpTablenot-accessiblecurrentThis table contains Protected IP Addresses for ML-IP cards when working in IP Ring Mode.
1.3.6.1.4.1.164.3.2.2.1.2.1RowmdlProtIpEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.2.1.2.1.1ColumnmdlProtIpCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg being accessed. Idx 255 relates to the TmpCnfg. For Agents having several configuration, Write operation is allowe…
1.3.6.1.4.1.164.3.2.2.1.2.1.2ColumnmdlProtIpSlotIdxread-onlycurrentThis attribute indicates a unique slot position where the module is inserted. In the 2104 Unit the entries io6(10)..io16) are not valid.
1.3.6.1.4.1.164.3.2.2.1.2.1.3ColumnmdlProtIpAddressread-onlycurrentA Protected IP address.
1.3.6.1.4.1.164.3.2.2.1.2.1.4ColumnmdlProtIpRowStatusread-createcurrentThis parameter allows creating/deleting entries of this table.
1.3.6.1.4.1.164.3.2.2.2NodestatMdlMux
1.3.6.1.4.1.164.3.2.2.2.1TablemdlStatTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.2.2.2.1.1RowmdlStatEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.2.2.1.1.1ColumnmdlStatSltIdxread-onlycurrentA unique number to identify a slot position in the mux. In the 2104 Unit the entries psB(2),clB(4),io6(10)..io12(16) are not valid.
1.3.6.1.4.1.164.3.2.2.2.1.1.2ColumnmdlStatHostIPread-onlycurrentThe host interface IP address when DHCP Client=Yes. This object is relevant only when DHCP Client=Yes
1.3.6.1.4.1.164.3.2.2.2.1.1.3ColumnmdlStatHostMaskread-onlycurrentThe host interface subnet mask when DHCP Client=Yes. This object is relevant only when DHCP Client=Yes
1.3.6.1.4.1.164.3.2.2.2.1.1.4ColumnmdlStatDefaultGatewayread-onlycurrentDefault Gateway's IP Address when DHCP Client=Yes. This object is relevant only when DHCP Client=Yes
1.3.6.1.4.1.164.3.2.3NodeprtMux
1.3.6.1.4.1.164.3.2.3.1NodestatPrtMux
1.3.6.1.4.1.164.3.2.3.1.6TableprtSExHsfStatTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.2.3.1.6.1RowprtSExHsfStatEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.1.6.1.1ColumnprtSExHsfSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.
1.3.6.1.4.1.164.3.2.3.1.6.1.2ColumnprtSExHsfPrtIdxread-onlycurrentThis attribute indicates a unique port number.
1.3.6.1.4.1.164.3.2.3.1.6.1.3ColumnprtSExHsfInterfaceTypread-onlycurrentThis attribute indicates a unique interface type of a selected port.
1.3.6.1.4.1.164.3.2.3.1.6.1.4ColumnprtSExHsfRtsread-onlycurrentThis attribute indicates a unique RTS control signal state.
1.3.6.1.4.1.164.3.2.3.1.16TableprtIsdnStatusTablenot-accessiblecurrentThis table contains ISDN Statistics parameters that do not appear in the standard MIBs or for agents that don't support the standard Index of Call Set Up Time.
1.3.6.1.4.1.164.3.2.3.1.16.1RowprtIsdnStatusEntrynot-accessiblecurrentEntries for ISDN Statistics parameters that do not appear in the standard MIBs or for agents that don't support the standard Index of Call Set Up Time.
1.3.6.1.4.1.164.3.2.3.1.16.1.1ColumnprtIsdnStatusDspModeread-onlycurrentThe DSP can be in one of the following Modes: Voice, Idle, Fax, Voice Band Data (VBD)- Modem.
1.3.6.1.4.1.164.3.2.3.1.16.1.2ColumnprtIsdnStatusCallStateread-onlycurrentThe state that the current call is in.
1.3.6.1.4.1.164.3.2.3.1.16.1.3ColumnprtIsdnStatusCallingNumberread-onlycurrentThis is the local Number (ISDN Address) associated with this entry.
1.3.6.1.4.1.164.3.2.3.1.16.1.4ColumnprtIsdnStatusCalledNumberread-onlycurrentThis is the remote Number (ISDN Address) associated with this entry.
1.3.6.1.4.1.164.3.2.3.1.16.1.5ColumnprtIsdnStatusCalledIPread-onlycurrentThis is the remote IP Address associated with this entry.
1.3.6.1.4.1.164.3.2.3.1.16.1.6ColumnprtIsdnStatusCallDirectionread-onlycurrentAttribute indicating the Direction of the Call. The value of notApplicable will be used for example when prtIsdnStatusCallState = notActive(14).
1.3.6.1.4.1.164.3.2.3.2NodecnfgPrtMux
1.3.6.1.4.1.164.3.2.3.2.1NodeprtClCnfg
1.3.6.1.4.1.164.3.2.3.2.1.1TableprtExClCnfgTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.2.3.2.1.1.1RowprtExClCnfgEntrynot-accessiblecurrentAll the entries at this table are identical (have the same value) for all the configurations (1..100) except the TmpCnfg. The write operation into the Table Ob…
1.3.6.1.4.1.164.3.2.3.2.1.1.1.1ColumnprtExClCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.1.1.1.2ColumnprtExClSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. Because the second Cl is only for redundancy, all the parameters are identical in t…
1.3.6.1.4.1.164.3.2.3.2.1.1.1.3ColumnprtExClPrtIdxread-onlycurrentThis attribute indicates a unique port number.
1.3.6.1.4.1.164.3.2.3.2.1.1.1.4ColumnprtExClUsageread-onlycurrentThis attribute indicates what is the usage of the port.
1.3.6.1.4.1.164.3.2.3.2.1.1.1.5ColumnprtExClRateread-onlycurrentThis attribute indicates the operation rate of the port.
1.3.6.1.4.1.164.3.2.3.2.1.1.1.6ColumnprtExClDataBitsread-onlycurrentThis attribute indicates the number of data bits in async frame
1.3.6.1.4.1.164.3.2.3.2.1.1.1.7ColumnprtExClParityread-onlycurrentThis attribute indicates if the parity operation mode in async frame
1.3.6.1.4.1.164.3.2.3.2.1.1.1.8ColumnprtExClStopBitsread-onlycurrentThis attribute indicates the minimum number of stop bits in the tx async frame
1.3.6.1.4.1.164.3.2.3.2.1.1.1.9ColumnprtExClRoutingProtocolread-onlycurrentThis attribute indicates the routing protocol of the port. When prtExClUsage is nmsSlip or nmsPpp - all values are applicable . Else - only 'none' is applicabl…
1.3.6.1.4.1.164.3.2.3.2.1.1.1.10ColumnprtExClEnabledread-onlycurrentThis attribute indicates if Ethernet port of CL is enabled or not for management. It is applicable only on the ETH port of the CL, when the MP includes an ML-I…
1.3.6.1.4.1.164.3.2.3.2.2NodeprtPh1MlCnfg
1.3.6.1.4.1.164.3.2.3.2.2.1TableprtExPh1MlCnfgTablenot-accessiblecurrent- For products supporting more than one configuration, the write operation into the Table is valid only to the TmpCnfg entry. - For products that do not suppor…
1.3.6.1.4.1.164.3.2.3.2.2.1.1RowprtExPh1MlCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.2.1.1.1ColumnprtExPh1MlCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.2.1.1.2ColumnprtExPh1MlSltIdxread-onlycurrentThis attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. For the Vmux2100 Main …
1.3.6.1.4.1.164.3.2.3.2.2.1.1.3ColumnprtExPh1MlPrtIdxread-onlycurrentThis attribute indicates a unique port number. MP-2100/2200: MTML-1/E1 and MTML-1/T1 cards have only one external interface. inPrt1, inPrt2 - for MTML-H/2E1 an…
1.3.6.1.4.1.164.3.2.3.2.2.1.1.4ColumnprtExPh1MlConnectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms. It also affects all the card considerations because it may indicat…
1.3.6.1.4.1.164.3.2.3.2.2.1.1.5ColumnprtExPh1MlLineTyperead-writecurrent
1.3.6.1.4.1.164.3.2.3.2.2.1.1.6ColumnprtExPh1MlLineCoderead-writecurrentThis attribute is the line code parameter used for T1/E1 interface. The user should select only the parameters which are relevant to the specific card: T1 line…
1.3.6.1.4.1.164.3.2.3.2.2.1.1.7ColumnprtExPh1MlLineLenread-writecurrentThis attribute is the line length parameter used only for T1/DSU interfaces. lenXXXpXXXft = len-XXX-XXXft.
1.3.6.1.4.1.164.3.2.3.2.2.1.1.8ColumnprtExPh1MlRestoreTimeread-writecurrentThe time passing from the disappearance of the loss of synchronization condition (red alarm) to the restoration of normal service. The options 1secFast(2) and …
1.3.6.1.4.1.164.3.2.3.2.2.1.1.9ColumnprtExPh1MlTxGainread-writecurrentThis attribute is the tx gain parameter used only for T1/CSU interfaces.
1.3.6.1.4.1.164.3.2.3.2.2.1.1.10ColumnprtExPh1MlRxSensitivityread-writecurrentThis attribute is the rx line sensitivity parameter. low26dBm, high36dBm - applicable for T1-CSU shortHaul, longHaul - applicable for MTML-4 cards low15dbm was…
1.3.6.1.4.1.164.3.2.3.2.2.1.1.11ColumnprtExPh1MlIdleCoderead-writecurrentDetermines the code for transmission in empty time slots. Type value(00-FFH), Excluding 0H,8H,10H,12H,21H,24H,42H,49H, 84H,92H
1.3.6.1.4.1.164.3.2.3.2.2.1.1.12ColumnprtExPh1MlTdmTrunkread-writecurrentThis attribute indicates whether the port is used to transfer TDM cards data and through which Bus.
1.3.6.1.4.1.164.3.2.3.2.2.1.1.13ColumnprtExPh1MlClkModeread-writecurrentDefines the clock operation mode of the T1/E1 interface. Ports that are connected to the TDM Buses must be in nodalTiming(3) clock mode.
1.3.6.1.4.1.164.3.2.3.2.2.1.1.14ColumnprtExPh1MlMfClkSrcSltread-writecurrentThis attribute indicates whether the port Tx multiframe is synchronized with Rx multiframe of another port and the slot position of that port. This operation i…
1.3.6.1.4.1.164.3.2.3.2.2.1.1.15ColumnprtExPh1MlMfClkSrcPrtread-writecurrentA unique number to identify a port position in the mux. It has no effect when the prtExPh1MlMfClkSrcSlt selected is Local. inPrt1 - for MTML-H/E1 cards.
1.3.6.1.4.1.164.3.2.3.2.2.1.1.16ColumnprtExPh1MlFdlTyperead-writecurrentA unique number to identify the side of the FDL operation. Normal: 'response' for the user side and 'command' for the PTT side. Applicable only when working wi…
1.3.6.1.4.1.164.3.2.3.2.2.1.1.17ColumnprtExPh1MlInbandMngread-writecurrentA unique number to identify an Inband management over the link.
1.3.6.1.4.1.164.3.2.3.2.2.1.1.18ColumnprtExPh1MlInbandMngRateread-writecurrentA unique number to identify the rate of the Inband management (Kbps). E1 port - it is not applicable when prtExPh1MlInbandMng selected is off. T1 port - it is …
1.3.6.1.4.1.164.3.2.3.2.2.1.1.19ColumnprtExPh1MlRedundTyperead-writecurrentThis object determines the ML redundancy type: none - no ML redundacy dualCableAIS - each ML card is connected by a separate dualCableParallelTx cable to the o…
1.3.6.1.4.1.164.3.2.3.2.2.1.1.20ColumnprtExPh1MlRedundSlotread-writecurrentThis object indicates the slot containing the redundacy ML card, coupled with the current ML (prtExPh1MlSltIdx). When prtExPh1MlRedundType=none (no ML redundan…
1.3.6.1.4.1.164.3.2.3.2.2.1.1.21ColumnprtExPh1MlRedundPortread-writecurrentThis object indicates the redundacy ML port, coupled with the current ML port (prtExPh1MlPrtIdx). When prtExPh1MlRedundType=none (no ML redundancy) this object…
1.3.6.1.4.1.164.3.2.3.2.2.1.1.22ColumnprtExPh1MlRedundRecTimeread-writecurrentRedundancy Recovery Time (sec). After switching the ML card to the current (prtExPh1MlSltIdx), the next ML switch can be performed only after a minimum time, i…
1.3.6.1.4.1.164.3.2.3.2.2.1.1.23ColumnprtExPh1MlInbandMngRoutProtread-writecurrentThis attribute indicates the Inband Mng routing protocol of the port.
1.3.6.1.4.1.164.3.2.3.2.2.1.1.24ColumnprtExPh1MlIfTyperead-writecurrentInterface type of the port. For T1 - csu, dsu are the valid values For E1 - dsu, ltu are the valid values.
1.3.6.1.4.1.164.3.2.3.2.2.1.1.25ColumnprtExPh1MlMultiplierread-writecurrentThe data rate of each TS. The multiplier values can be 56 kbps or 64 kbps.
1.3.6.1.4.1.164.3.2.3.2.2.1.1.26ColumnprtExPh1MlSupportedTSread-onlycurrentNumber of Supported Time Slots by the agent. For Vmux-110 there is HW that supports less than 31/24 Time Slots for the E1/T1 port.
1.3.6.1.4.1.164.3.2.3.2.2.1.1.27ColumnprtExPh1MlImpedanceread-writecurrentThe Line Impedance. For T1 (always balanced), impedance is 100 ohm. For E1: - balanced = 120 ohm - unbalanced = 75 ohm.
1.3.6.1.4.1.164.3.2.3.2.2.1.1.28ColumnprtExPh1MlQ50BwControlread-writecurrentThis object enables configuration of Q.50 Bandwidth Control on the port. If the bandwidth exceeds a certain threshold it is possible to disable new calls in th…
1.3.6.1.4.1.164.3.2.3.2.2.1.1.29ColumnprtExPh1MlQ50SignalPairread-writecurrentQ.50 Signaling bits Pair that is currently in use: A&B bits or C&D bits. For Annex B it will always be: aAndB (2).
1.3.6.1.4.1.164.3.2.3.2.2.1.1.30ColumnprtExPh1MlInternalSwitchread-writecurrentThis parameter shows whether the data will be transferred from one port to the other port within the same group of 2 ports. The default value is: Enable. Disab…
1.3.6.1.4.1.164.3.2.3.2.2.1.1.31ColumnprtExPh1MlSigServiceread-writecurrentSignaling Service given by this link. notApplicable - for T1 links normal - usual Signaling advanced - V5 Signaling.
1.3.6.1.4.1.164.3.2.3.2.2.1.1.32ColumnprtExPh1MlFragmentSizeread-writecurrentThis parameter indicates the maximum number of bytes permitted in a packet send over the Link. Exceeding this size will cause packet fragmentation.
1.3.6.1.4.1.164.3.2.3.2.2.2TableprtExPh1MlTsTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry, except prtExPh1MlTsTest that will be written directly to the Active Configuratio…
1.3.6.1.4.1.164.3.2.3.2.2.2.1RowprtExPh1MlTsEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.2.2.1.1ColumnprtExPh1MlTsCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.2.2.1.2ColumnprtExPh1MlTsSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid. For the Vmux2100 Main Bo…
1.3.6.1.4.1.164.3.2.3.2.2.2.1.3ColumnprtExPh1MlTsPrtIdxread-onlycurrentThis attribute indicates a unique port number. MPH.1/E1 and MPH.1/T1 cards have only one external interface. exPrt2 - for ME1-2, MT1-2 and mhsPri cards. exPrt3…
1.3.6.1.4.1.164.3.2.3.2.2.2.1.4ColumnprtExPh1MlTsIdxread-onlycurrentThis attribute indicates a unique time slot position. The valid time slots are 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines time slot 16 is …
1.3.6.1.4.1.164.3.2.3.2.2.2.1.5ColumnprtExPh1MlTsIConSlotread-writecurrentThis attribute indicates whether the specified time slot is connected/routed internally in the Agent and to which card it is connected. In the ?004 Unit the en…
1.3.6.1.4.1.164.3.2.3.2.2.2.1.6ColumnprtExPh1MlTsIConPrtread-writecurrentThis attribute indicates the internally (In Mux) connected/routed port. For MP, the values will be: { exPrt1 (1) , exPrt2 (2) , exPrt3 (3) , exPrt4 (4) , exPrt…
1.3.6.1.4.1.164.3.2.3.2.2.2.1.7ColumnprtExPh1MlTsIConTsread-writecurrentThis attribute indicates a unique time slot position. The valid time slots are 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines time slot 16 is …
1.3.6.1.4.1.164.3.2.3.2.2.2.1.8ColumnprtExPh1MlTsExtread-onlycurrentA pointer to an extension of this table: prtExTsSplitTable. - If prtExPh1MlTsIConSlot='split', its value should be set to the OBJECT IDENTIFIER of the prtExTsS…
1.3.6.1.4.1.164.3.2.3.2.2.2.1.9ColumnprtExPh1MlTsTestread-writecurrentThis attribute indicates a test to be activated on the selected TS. It is applicable only when prtSTstCmd=testPerTS(31). notApplicable - when prtSTstCmd is NOT…
1.3.6.1.4.1.164.3.2.3.2.2.2.1.10ColumnprtExPh1MlTsTyperead-writecurrentThe Time Slot Type. Transparent - means that the Time Slot will be Rx/Tx as is without processing it. If the device requires more than 1 unique data or ss7 Tim…
1.3.6.1.4.1.164.3.2.3.2.2.2.1.11ColumnprtExPh1MlTsBundleread-writecurrentThe number of the bundle containing this Time Slot. If no bundle exists for this TS or the bundle number is irrelevant, the value will be 0.
1.3.6.1.4.1.164.3.2.3.2.2.2.1.12ColumnprtExPh1MlTsTestDurationread-writecurrentThis attribute indicates the maximum duration of executing a test on the specific TS. This entry applies to all the test operations. For the Vmux2100 the value…
1.3.6.1.4.1.164.3.2.3.2.2.2.1.13ColumnprtExPh1MlTsSubChTyperead-writecurrentThe Time Slot Sub-Channel Type. This variable is relevant only when Time-Slot Type is SubCh (e.g. prtExPh1MlTsType = subCh1...subCh8).
1.3.6.1.4.1.164.3.2.3.2.2.2.1.14ColumnprtExPh1MlTsSubChMaskread-writecurrentThe Sub-Channel Type Mask. This variable is relevant only when Time-Slot Type is SubCh (e.g. prtExPh1MlTsType = subCh1...subCh8).
1.3.6.1.4.1.164.3.2.3.2.2.2.1.15ColumnprtExPh1MlTsChRateread-writecurrentThe Rate of the Signaling Channel. notApplicable(1) when TS Type is other than Signaling or Transparent
1.3.6.1.4.1.164.3.2.3.2.2.2.1.16ColumnprtExPh1MlTsByteReversalread-writecurrentByte Reversal. This variable defines whether the LSB or MSB is transmitted first. no(2) - MSB is transmitted first yes(3) - LSB is transmitted first.
1.3.6.1.4.1.164.3.2.3.2.2.2.1.17ColumnprtExPh1MlTsSigProfileread-writecurrentThis object indicates the Signaling Profile of the port. It is applicable only when prtMl4SigProfile=perTS. p1 = profile 1 p2 = profile 2 p3 = profile 3 p4 = p…
1.3.6.1.4.1.164.3.2.3.2.2.3TableprtInPh1MlCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.2.3.1RowprtInPh1MlCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.2.3.1.1ColumnprtInPh1MlCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.2.3.1.2ColumnprtInPh1MlSltTyperead-onlycurrentThis attribute indicates a unique slot position where the card is inserted. For ISDN BRI port of MX300/30: io1(5) = isdn1(5) and io2(6) = isdn2(6) In the ?004 …
1.3.6.1.4.1.164.3.2.3.2.2.3.1.3ColumnprtInPh1MlPrtIdxread-onlycurrentThis attribute indicates a unique port number. MPH.1/E1 and MPH.1/T1 cards have three internal interfaces. MX3000 modules may have up to 50 internal ports.
1.3.6.1.4.1.164.3.2.3.2.2.3.1.4ColumnprtInPh1MlConnectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.2.3.1.5ColumnprtInPh1MlRateread-writecurrentThis attribute indicates the port speed.
1.3.6.1.4.1.164.3.2.3.2.2.3.1.6ColumnprtInPh1MlProtocolread-writecurrentThis attribute indicates the applied protocol.
1.3.6.1.4.1.164.3.2.3.2.2.3.1.7ColumnprtInPh1MlConnectionTypread-writecurrentThis attribute indicates the link connection type. It is required for three reasons: FR/CR Inband management operation (LMI,CLMM...). CIR check. NMS network ma…
1.3.6.1.4.1.164.3.2.3.2.2.3.1.8ColumnprtInPh1MlCongResponseread-writecurrentThis attribute indicates how to handle the congestion indication to/from the mux internal connection side (for example transmit/receive becn to/from the networ…
1.3.6.1.4.1.164.3.2.3.2.2.3.1.9ColumnprtInPh1MlCongLevelread-writecurrentThis attribute indicates the level of delayed data in precents of the total available dynamic memory, for which the port will start to operate . The resolution…
1.3.6.1.4.1.164.3.2.3.2.2.3.1.10ColumnprtInPh1MlTcread-writecurrentThis attribute indicates the Tc parameter which is the time period of the sliding window in which the Bc/Be are tested. The value of this parameter is identica…
1.3.6.1.4.1.164.3.2.3.2.2.3.1.11ColumnprtInPh1MlFlowControlread-writecurrentThis attribute indicates the required flow control betweeen the port and the remote equipment.
1.3.6.1.4.1.164.3.2.3.2.2.3.1.12ColumnprtInPh1MlSegmentread-writecurrentThis object is the Segmentation in Bytes. In protocol FR+, ISDN internals, MX 30/300 the segmentation is: 50 (2) ,158 (3) ,266 (4) ,376 (5), 484 (6) In MX 3000…
1.3.6.1.4.1.164.3.2.3.2.2.3.1.13ColumnprtInPh1MlFrMngProtread-writecurrentThis object indicates the Frame-Relay management protocol. ansiT1 = ANSI T1.617 Annex D (this is the default value). This parameter is applicable only for FR a…
1.3.6.1.4.1.164.3.2.3.2.2.3.1.14ColumnprtInPh1MlEnqPeriodread-writecurrentThis object is the Status Enquiry Period, in seconds. It determines the frequency of the Status Enquiry message as sent by the FR user side. At the FR network …
1.3.6.1.4.1.164.3.2.3.2.2.3.1.15ColumnprtInPh1MlFullRptPeriodread-writecurrentThis object is the Full Report Frequency. It determines the number of the Status Enquiry messages sent by the FR user side, before a Full Report Request is sen…
1.3.6.1.4.1.164.3.2.3.2.2.3.1.16ColumnprtInPh1MlFrWindowSizeread-writecurrentThis object is the FR Window Size. It determines the number of samplings in the sliding window that counts the errors. This parameter is applicable only for FR…
1.3.6.1.4.1.164.3.2.3.2.2.3.1.17ColumnprtInPh1MlErrorsThresholdread-writecurrentThis object is the Max Errors. It determines the number of Status Enquiry Errors that occured within the FR sliding window, before this port is considered DOWN…
1.3.6.1.4.1.164.3.2.3.2.2.3.1.18ColumnprtInPh1MlMaxIdleTimeread-writecurrentMove to higher prioritized connected link after this period of seconds of silence on the current link. 0=Never. Never move to higher prioritized connected link…
1.3.6.1.4.1.164.3.2.3.2.2.3.1.19ColumnprtInPh1MlBearerChread-writecurrentDefines which B (bearer) channels are used for transferring ISDN data. Default value is: none (255). anyChannel (2) is skipped because it is not in use here.
1.3.6.1.4.1.164.3.2.3.2.2.3.1.20ColumnprtInPh1MlAssociatedExChread-writecurrentThis object indicates the external port associated to this internal port. At present, it is used by the Hybrid (mp2100h), MHS-4 cards which can have up to 64 d…
1.3.6.1.4.1.164.3.2.3.2.2.3.1.21ColumnprtInPh1MlClockEncodingread-writecurrentThis object is the Encoding type of the Line. This parameter is applicable only for FR and FR+ protocols.
1.3.6.1.4.1.164.3.2.3.2.2.3.1.22ColumnprtInPh1MlMinSeparatorsread-writecurrentMinimum number of bytes separating between two adjacent frames (HDLC item). 0 = notApplicable
1.3.6.1.4.1.164.3.2.3.2.2.3.1.23ColumnprtInPh1MlCcittCrcread-writecurrentThis object indicates how many Bits are used for CRC (HDLC item).
1.3.6.1.4.1.164.3.2.3.2.2.3.1.24ColumnprtInPh1MlFrameSeparatorread-writecurrentThis object indicates what should be transferred on the line when there are no frames to pass (HDLC item). idles: mean that FF will pass on the line flags: mea…
1.3.6.1.4.1.164.3.2.3.2.2.4TableprtInPh1MlDlciTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.2.4.1RowprtInPh1MlDlciEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.2.4.1.1ColumnprtInPh1MlDlciCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.2.4.1.2ColumnprtInPh1MlDlciSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid
1.3.6.1.4.1.164.3.2.3.2.2.4.1.3ColumnprtInPh1MlDlciPrtIdxread-onlycurrentThis attribute indicates a unique internal port number. MPH.1/E1 and MPH.1/T1 cards have three internal ports.
1.3.6.1.4.1.164.3.2.3.2.2.4.1.4ColumnprtInPh1MlDlciIdxread-onlycurrentThis attribute indicates a unique index for each possible used dlci(16..991). When the protocol is not Multiplexing protocol, then its type is 'user' and the o…
1.3.6.1.4.1.164.3.2.3.2.2.4.1.5ColumnprtInPh1MlDlciValidread-writecurrentThis attribute indicates whether the attributes in this entry are valid or not. The user can add/delete pvc (dlci to dlci connection) by modifing this object
1.3.6.1.4.1.164.3.2.3.2.2.4.1.6ColumnprtInPh1MlDlciIConSltread-writecurrentThis attribute indicates a unique slot position In the Mux (Agent) where the dlci is routed to. In the ?004 Unit the entries io6(10)..io16) are not valid
1.3.6.1.4.1.164.3.2.3.2.2.4.1.7ColumnprtInPh1MlDlciIConPrtread-writecurrentThis attribute indicates a unique port id which the dlci is routed to.
1.3.6.1.4.1.164.3.2.3.2.2.4.1.8ColumnprtInPh1MlDlciIConDlciread-writecurrentThis attribute indicates a unique internal connection dlci number which the src dlci is routed to.
1.3.6.1.4.1.164.3.2.3.2.2.4.1.9ColumnprtInPh1MlDlciTxBcread-writecurrentThis attribute indicates a unique Tx committed bandwidth on the user transmit line or at the port receive line.
1.3.6.1.4.1.164.3.2.3.2.2.4.1.10ColumnprtInPh1MlDlciTxBeread-writecurrentThis attribute indicates a unique Tx excess bandwidth on the user transmit line or at the port receive line.
1.3.6.1.4.1.164.3.2.3.2.2.4.1.11ColumnprtInPh1MlDlciRxBcread-writecurrentThis attribute indicates a unique Rx committed bandwidth on the user receive line or at the port transmit line.
1.3.6.1.4.1.164.3.2.3.2.2.4.1.12ColumnprtInPh1MlDlciRxBeread-writecurrentThis attribute indicates a unique Rx excess bandwidth on the user receive line or at the port transmit line.
1.3.6.1.4.1.164.3.2.3.2.2.4.1.13ColumnprtInPh1MlDlciPriorityread-writecurrentThis attribute indicates a unique priority of the pcv. 1 is the lowest priority and 8 is the highest priority.
1.3.6.1.4.1.164.3.2.3.2.2.4.1.14ColumnprtInPh1MlDlciStatusread-onlycurrentThis attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected
1.3.6.1.4.1.164.3.2.3.2.2.5TableprtPhMlCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.2.5.1RowprtPhMlCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.2.5.1.1ColumnprtPhMlCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.2.5.1.2ColumnprtPhMlSltIdxread-onlycurrentThis attribute indicates a unique slot position where the module is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For the Vmux2100 Ma…
1.3.6.1.4.1.164.3.2.3.2.2.5.1.3ColumnprtPhMlPrtIdxread-onlycurrentThis attribute indicates a unique port number. ML-20 cards have just one external interface.
1.3.6.1.4.1.164.3.2.3.2.2.5.1.4ColumnprtPhMlConnectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.2.5.1.5ColumnprtPhMlRateread-writecurrentThis attribute indicates the configured port speed. auto - rate is adapted automatically to the attached modem rate.
1.3.6.1.4.1.164.3.2.3.2.2.5.1.6ColumnprtPhMlCASread-writecurrentThis attribute indicates whether Channel Associated Signaling (CAS) is used.
1.3.6.1.4.1.164.3.2.3.2.2.5.1.7ColumnprtPhMlClockModeread-writecurrentClock mode.
1.3.6.1.4.1.164.3.2.3.2.2.5.1.8ColumnprtPhMlSatBufferread-writecurrentSatellite Buffer (+/- 256).
1.3.6.1.4.1.164.3.2.3.2.2.5.1.9ColumnprtPhMlDialProcessread-writecurrentDial Process.
1.3.6.1.4.1.164.3.2.3.2.2.5.1.10ColumnprtPhMlSyncRestoreread-writecurrentSync Restoration time, in seconds. notApplicable=0.
1.3.6.1.4.1.164.3.2.3.2.2.5.1.11ColumnprtPhMlBusread-writecurrentThe TDM BUS this port is linked to.
1.3.6.1.4.1.164.3.2.3.2.2.5.1.12ColumnprtPhMlMfSyncSlotread-writecurrentThis attribute indicates whether the sync is synchronized according to a certain card and the slot of this card. This operation is required in order to bypass …
1.3.6.1.4.1.164.3.2.3.2.2.5.1.13ColumnprtPhMlClockSourceread-writecurrentThe Clock Source: TC (Tx Clock) or RC (Rx Clock) signals.
1.3.6.1.4.1.164.3.2.3.2.2.5.1.14ColumnprtPhMlErrCorrectionread-writecurrentThis object indicates if Error Correction mechanism should be applied or not. It will be applicable only if the interface HW includes the Error Correction chip.
1.3.6.1.4.1.164.3.2.3.2.2.5.1.15ColumnprtPhMlCorrectionModeread-writecurrentThis object is applicable only when prtPhMlErrCorrection=yes. random - enables to correct up to 3 random errors in an 23 bit frame built from 12 data bits and …
1.3.6.1.4.1.164.3.2.3.2.2.5.1.16ColumnprtPhMlControlSignalsread-writecurrentThis object shows whether the Port will ignore or implement the control signals like DCD, CTS, DTR.
1.3.6.1.4.1.164.3.2.3.2.2.5.1.17ColumnprtPhMlInterfaceTyperead-writecurrentThe SW Configurable Interface Type.
1.3.6.1.4.1.164.3.2.3.2.2.5.1.18ColumnprtPhMlClockPolarityread-writecurrentThis object indicates the clock polarity.
1.3.6.1.4.1.164.3.2.3.2.3NodeprtPhPlCnfg
1.3.6.1.4.1.164.3.2.3.2.3.1TableprtExPhPlCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.3.1.1RowprtExPhPlCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.3.1.1.1ColumnprtExPhPlCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.3.1.1.2ColumnprtExPhPlSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid
1.3.6.1.4.1.164.3.2.3.2.3.1.1.3ColumnprtExPhPlPrtIdxread-onlycurrentThis attribute indicates a unique port number. In case of PH.1 card, only exPrt(1) is valid.
1.3.6.1.4.1.164.3.2.3.2.3.1.1.4ColumnprtExPhPlConnectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.3.1.1.5ColumnprtExPhPlHRateread-writecurrent
1.3.6.1.4.1.164.3.2.3.2.3.1.1.6ColumnprtExPhPlLRateread-writecurrent
1.3.6.1.4.1.164.3.2.3.2.3.1.1.7ColumnprtExPhPlProtocolread-writecurrentThis object indicates the applied protocol.
1.3.6.1.4.1.164.3.2.3.2.3.1.1.8ColumnprtExPhPlConnectionTypread-writecurrentThis attribute indicates the link connection type. It is required for three reasons: FR/CR Inband management opration (LMI,CLMM...). CIR check. NMS network man…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.9ColumnprtExPhPlClkModeread-writecurrentClock mode.
1.3.6.1.4.1.164.3.2.3.2.3.1.1.10ColumnprtExPhPlDceClkSrcread-writecurrentThis attribute indicates the source of the clock when working in dce or ext-dce clock mode. notApplicable(1) - is applied for dte(3) and lbt(5) clock modes. Wh…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.11ColumnprtExPhPlCongResponseread-writecurrentThis attribute indicates how to handle the congestion indication to/from the mux internal connection side (for example transmit/received becn to/from the netwo…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.12ColumnprtExPhPlCongLevelread-writecurrentThis attribute indicates the level of delayed data in precents of total available dynamic memory, for which the port will start to operate as congested. The re…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.13ColumnprtExPhPlTcread-writecurrentThis attribute indicates the Tc parameter which is the time period of the sliding window in which the Bc/Be are tested. The value of this parameter is identica…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.14ColumnprtExPhPlFlowControlread-writecurrentThis attribute indicates the required flow control betweeen the port and the remote equipment. fecnBecn - is valid only for FR, FR+ and CR protocols. xonXoff,d…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.15ColumnprtExPhPlDcdRtsread-writecurrentProtocol may require end to end connect indication over the network. End to end link connection establishment over the FR network will be indicated to the user…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.16ColumnprtExPhPlDcdRtsControlPathread-writecurrentProtocol may require end to end connect indication over the network. This parameter defines whether to take the user connection status (RTS(DCE)/DCD(DTE)) and …
1.3.6.1.4.1.164.3.2.3.2.3.1.1.17ColumnprtExPhPlDataBitsread-writecurrentThis attribute indicates the number of data bits in async frame. It is relevant only for Async protocols.
1.3.6.1.4.1.164.3.2.3.2.3.1.1.18ColumnprtExPhPlParityread-writecurrentThis attribute indicates the parity operation mode in async frame. It is relevant only for Async protocols.
1.3.6.1.4.1.164.3.2.3.2.3.1.1.19ColumnprtExPhPlStopBitsread-writecurrentThis attribute indicates the minimum number of stop bits in the tx async frame. It is relevant only for Async protocols.
1.3.6.1.4.1.164.3.2.3.2.3.1.1.20ColumnprtExPhPlLXonread-writecurrentThis attribute indicates the character used as X-On to notify receive enable. This parameter is valid only for async protocols. Valid values: 0..255. The value…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.21ColumnprtExPhPlLXoffread-writecurrentThis attribute indicates the character used as X-Off to notify receive disable. This parameter is valid only for async protocols. Valid values: 0..255. The val…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.22ColumnprtExPhPlFrMngProtread-writecurrentThis object indicates the Frame-Relay management protocol. ansiT1 = ANSI T1.617 Annex D (this is the default value). This parameter is applicable only for FR a…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.23ColumnprtExPhPlEnqPeriodread-writecurrentThis object is the Status Enquiry Period, in seconds. It determines the frequency of the Status Enquiry message as sent by the FR user side. At the FR network …
1.3.6.1.4.1.164.3.2.3.2.3.1.1.24ColumnprtExPhPlFullRptPeriodread-writecurrentThis object is the Full Report Frequency. It determines the number of the Status Enquiry messages sent by the FR user side, before a Full Report Request is sen…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.25ColumnprtExPhPlFrWindowSizeread-writecurrentThis object is the FR Window Size. It determines the number of samplings in the sliding window that counts the errors. This parameter is applicable only for FR…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.26ColumnprtExPhPlErrorsThresholdread-writecurrentThis object is the Max Errors. It determines the number of Status Enquiry Errors that occured within the FR sliding window, before this port is considered DOWN…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.27ColumnprtExPhPlPvcCreateMsgread-writecurrentThis object is Update Message (if required or not). It determines whether a message of a New PVC Creation is requested or not (yes/no). Default = no. This para…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.28ColumnprtExPhPlCllmMsgread-writecurrentThis object is CLLM Message (if required or not). It determines whether to send (or not) a congestion message when the port is Rx congested. Default = no. This…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.29ColumnprtExPhPlProtDelayLevelread-writecurrentThis object is the Segmentation in Bytes. In some cases, the enumerated values will mean other segmentation values than specified: Product: MX-3000 MX-3000 MX-…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.30ColumnprtExPhPlClockEncodingread-writecurrentThis object is the Encoding type of the Line. This parameter is applicable only for FR and FR+ protocols. For MAXCESS 3000 & MP2100H: when setting to nrzI (3) …
1.3.6.1.4.1.164.3.2.3.2.3.1.1.31ColumnprtExPhPlMinSeparatorsread-writecurrentMinimum number of bytes separating between two adjacent frames (HDLC item). 0 = notApplicable
1.3.6.1.4.1.164.3.2.3.2.3.1.1.32ColumnprtExPhPlCcittCrcread-writecurrentThis object indicates how many Bits are used for CRC (HDLC item).
1.3.6.1.4.1.164.3.2.3.2.3.1.1.33ColumnprtExPhPlFrameSeparatorread-writecurrentThis object indicates what should be transferred on the line when there are no frames to pass (HDLC item). idles: mean that FF will pass on the line flags: mea…
1.3.6.1.4.1.164.3.2.3.2.3.1.1.34ColumnprtExPhPlIdleCoderead-writecurrentDetermines the code for transmission when there are no frames to transmit on the line. The value should be 0 to FFH.
1.3.6.1.4.1.164.3.2.3.2.3.1.1.35ColumnprtExPhPlJitterread-writecurrentMaximum variant delay of the FR network, in msec.
1.3.6.1.4.1.164.3.2.3.2.3.2TableprtExPhPlDlciTablenot-accessiblecurrentThe write operation into the Table Objects is valid only at the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.3.2.1RowprtExPhPlDlciEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.3.2.1.1ColumnprtExPhPlDlciCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.3.2.1.2ColumnprtExPhPlDlciSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid
1.3.6.1.4.1.164.3.2.3.2.3.2.1.3ColumnprtExPhPlDlciPrtIdxread-onlycurrentThis attribute indicates a unique internal port number. PH.1/E1 and PH.1/T1 cards have three internal ports. Stand-alone units may have six such ports.
1.3.6.1.4.1.164.3.2.3.2.3.2.1.4ColumnprtExPhPlDlciIdxread-onlycurrentThis attribute indicates a unique index for each possible used dlci(16..991). When the protocol is not Multiplexing protocol, its type is 'user' and the only v…
1.3.6.1.4.1.164.3.2.3.2.3.2.1.5ColumnprtExPhPlDlciValidread-writecurrentThis attribute indicates whether the attributes in this entry are valid or not. The user can add/delete pvc (dlci to dlci connection) by modifing this object
1.3.6.1.4.1.164.3.2.3.2.3.2.1.6ColumnprtExPhPlDlciIConSltread-writecurrentThis attribute indicates a unique slot position In the Mux (Agent) where the dlci is routed to. cl - will represent any of the CL slots. This value can be sele…
1.3.6.1.4.1.164.3.2.3.2.3.2.1.7ColumnprtExPhPlDlciIConPrtread-writecurrentThis attribute indicates a unique port id which the dlci is routed to. clNMS - will be used for NMS SNMP messages. It can be any port of the CL card. This valu…
1.3.6.1.4.1.164.3.2.3.2.3.2.1.8ColumnprtExPhPlDlciIConDlciread-writecurrentThis attribute indicates a unique internal connection dlci number, the dlci is routed to.
1.3.6.1.4.1.164.3.2.3.2.3.2.1.9ColumnprtExPhPlDlciTxBcread-writecurrentThis attribute indicates a unique Tx committed bandwidth on the user transmit line (or at the port receive line).
1.3.6.1.4.1.164.3.2.3.2.3.2.1.10ColumnprtExPhPlDlciTxBeread-writecurrentThis attribute indicates a unique Tx excess bandwidth on the user transmit line (or at the port receive line).
1.3.6.1.4.1.164.3.2.3.2.3.2.1.11ColumnprtExPhPlDlciRxBcread-writecurrentThis attribute indicates a unique Rx committed bandwidth on the user receive line (or at the port transmit line).
1.3.6.1.4.1.164.3.2.3.2.3.2.1.12ColumnprtExPhPlDlciRxBeread-writecurrentThis attribute indicates a unique Rx excess bandwidth on the user receive line (or at the port transmit line).
1.3.6.1.4.1.164.3.2.3.2.3.2.1.13ColumnprtExPhPlDlciPriorityread-writecurrentThis attribute indicates a unique priority of the pcv. 1 is the lowest priority and 8 is the highest priority.
1.3.6.1.4.1.164.3.2.3.2.3.2.1.14ColumnprtExPhPlDlciStatusread-onlycurrentThis attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected
1.3.6.1.4.1.164.3.2.3.2.3.3TableprtExPhPlModemTablenot-accessiblecurrentExternal Modem Parameters. The write operation into the Table Objects is valid only for the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.3.3.1RowprtExPhPlModemEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.3.3.1.1ColumnprtExPhPlModemCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.3.3.1.2ColumnprtExPhPlModemSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid
1.3.6.1.4.1.164.3.2.3.2.3.3.1.3ColumnprtExPhPlModemPrtIdxread-onlycurrentThis attribute indicates a unique port number. In case of PH.1 card, only exPrt(1) is valid.
1.3.6.1.4.1.164.3.2.3.2.3.3.1.4ColumnprtExPhPlModemStatusread-writecurrentThis object indicates whether a Dial Up Modem is enabled on this port. Default: disable For Vmux devices this object shows whether there is Modem Relay support.
1.3.6.1.4.1.164.3.2.3.2.3.3.1.5ColumnprtExPhPlModemActivateread-writecurrentThis object indicates whether the Dial Up Modem is activated when the first frame is received or it is always activated. Default: onFirstFrame
1.3.6.1.4.1.164.3.2.3.2.3.3.1.6ColumnprtExPhPlModemMaxIdleTimeread-writecurrentMax Time allowed in Seconds without any traffic before the line is disconnected. Legal Values are: 1 sec, 2 sec .. 5 sec, 10 sec, 20 sec.. 1 min, 2 min .. 10 m…
1.3.6.1.4.1.164.3.2.3.2.3.3.1.7ColumnprtExPhPlModemTimeBtwnCallsread-writecurrentMinimum Time in Seconds which is required after a call was disconnected. In this time no other call will be initiated from this Modem port even if there were f…
1.3.6.1.4.1.164.3.2.3.2.3.3.1.8ColumnprtExPhPlModemCallDelayread-writecurrentTime in Seconds that the device will wait before dialing to the remote device. This feature is mostly used when there is a backup modem to the main link and th…
1.3.6.1.4.1.164.3.2.3.2.4NodeprtLs2Cnfg
1.3.6.1.4.1.164.3.2.3.2.4.1TableprtExLs2CnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.4.1.1RowprtExLs2CnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.4.1.1.1ColumnprtExLs2CnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.4.1.1.2ColumnprtExLs2SltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.
1.3.6.1.4.1.164.3.2.3.2.4.1.1.3ColumnprtExLs2PrtIdxread-onlycurrentThis attribute indicates a unique port index. For the Ls2/X.58 exPrt(7)..exPrt(10) are not valid.
1.3.6.1.4.1.164.3.2.3.2.4.1.1.4ColumnprtExLs2Connectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.4.1.1.5ColumnprtExLs2Rateread-writecurrentPort rates.
1.3.6.1.4.1.164.3.2.3.2.4.1.1.6ColumnprtExLs2ClkModeread-writecurrentThis attribute indicates a unique port operation clock mode.
1.3.6.1.4.1.164.3.2.3.2.4.1.1.7ColumnprtExLs2Ctsread-writecurrentCTS.
1.3.6.1.4.1.164.3.2.3.2.4.1.1.8ColumnprtExLs2Dcdread-writecurrentDCD.
1.3.6.1.4.1.164.3.2.3.2.4.1.1.9ColumnprtExLs2EnvIdxread-writecurrentEnvelope Index. When prtInLs2EnvAssign=auto, the value is 0 (not applicable).
1.3.6.1.4.1.164.3.2.3.2.4.2TableprtInLs2CnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.4.2.1RowprtInLs2CnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.4.2.1.1ColumnprtInLs2CnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.4.2.1.2ColumnprtInLs2SltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.
1.3.6.1.4.1.164.3.2.3.2.4.2.1.3ColumnprtInLs2PrtIdxread-onlycurrentThis attribute indicates a unique internal port index.
1.3.6.1.4.1.164.3.2.3.2.4.2.1.4ColumnprtInLs2Connectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms. It also affects all the module considerations because the module h…
1.3.6.1.4.1.164.3.2.3.2.4.2.1.5ColumnprtInLs2Groupread-writecurrentThis attribute indicates the group number of the port. LS-2 internal ports with the same group number share the same Time slot of the main link
1.3.6.1.4.1.164.3.2.3.2.4.2.1.6ColumnprtInLs2Memberread-writecurrentThis attribute indicates the group member id of the port. This parameter is for the automatic envelope assignment algorithm.
1.3.6.1.4.1.164.3.2.3.2.4.2.1.7ColumnprtInLs2LinkToread-writedeprecatedIt indicates the slot of the main link card to which the LS2 card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnfg…
1.3.6.1.4.1.164.3.2.3.2.4.2.1.8ColumnprtInLs2EnvAssignread-writecurrentEnvelope assignment type.
1.3.6.1.4.1.164.3.2.3.2.5TableprtVc2CnfgTablenot-accessiblecurrent- For products supporting more than one configuration, the write operation into the Table is valid only to the TmpCnfg entry. - For products that do not suppor…
1.3.6.1.4.1.164.3.2.3.2.5.1RowprtVc2CnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.5.1.1ColumnprtVc2CnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.5.1.2ColumnprtVc2SltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. For Stand Alone products like WR: notApplicable (255)
1.3.6.1.4.1.164.3.2.3.2.5.1.3ColumnprtVc2PrtIdxread-onlycurrentA unique identifier of the port, within the card. For MP-2100/2200 card ports, Web Ranger and FCD-IP Voice ports the values will be: exPrt1 (1) exPrt2 (2) exPr…
1.3.6.1.4.1.164.3.2.3.2.5.1.4ColumnprtExVc2Connectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.5.1.5ColumnprtExVc2TransGainread-writecurrentTransmit gain in dBm. For ports of MP-104/204, MP-2100/2200 VC-6A, VC-6AG, VC-8 VC-4/Omni and VC-16 cards, the units will be 0.1dBm because valid values can be…
1.3.6.1.4.1.164.3.2.3.2.5.1.6ColumnprtExVc2ReceiveGainread-writecurrentReceive gain in dBm. For ports of MP-104/204, MP-2100/2200 VC-6A, VC-6AG, VC-8 VC-4/Omni and VC-16 cards, the units will be 0.1dBm because valid values can be …
1.3.6.1.4.1.164.3.2.3.2.5.1.7ColumnprtExVc2Wireread-writecurrentFor some cards, this object is equal for all the ports in the specific card because of HW limitations. For FXO & FXS this parameter is not applicable.
1.3.6.1.4.1.164.3.2.3.2.5.1.8ColumnprtExVc2CodingLawread-writecurrentThis attribute indicates the Method/Law for decoding/encoding the voice information. aLaw(1) is the standard Law for E1 links. uLaw(2) is the standard Law for …
1.3.6.1.4.1.164.3.2.3.2.5.1.9ColumnprtExVc2Sigread-writecurrentThis attribute indicates the method for decoding/encoding the signaling information(on/off hook). noSignaling (1) - not using signaling (only voice). robbedBit…
1.3.6.1.4.1.164.3.2.3.2.5.1.10ColumnprtExVc2Oosread-writecurrentThis object is equal for all the ports in the specific card because of HW limitations
1.3.6.1.4.1.164.3.2.3.2.5.1.11ColumnprtExVc2LinkToread-writedeprecatedThis attribute indicates the slot of the ML card to which the VC card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGen…
1.3.6.1.4.1.164.3.2.3.2.5.1.12ColumnprtExVc2OperModeread-writecurrentThis object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request.
1.3.6.1.4.1.164.3.2.3.2.5.1.13ColumnprtExVc2SigProfileread-writecurrentThis object indicates the Signaling Profile of the port. notApplicable - for VC-2 family and when prtExVc2Sig=noSignaling(1) p1 = profile 1 p2 = profile 2 p3 =…
1.3.6.1.4.1.164.3.2.3.2.5.1.14ColumnprtExVc2CallEnableread-writecurrentThis object indicates the Enabled Call direction. notApplicable - for all cards except VC-2/R2. both - incoming + outgoing.
1.3.6.1.4.1.164.3.2.3.2.5.1.15ColumnprtExVc2R2Delayread-writecurrentThis object indicates the R2 Delay. notApplicable - for all cards except VC-2/R2.
1.3.6.1.4.1.164.3.2.3.2.5.1.16ColumnprtExVc2CasStdread-writecurrentThis object indicates the CAS (Channel Associated Signaling) Standard. notApplicable - for all cards except VC-2/R2.
1.3.6.1.4.1.164.3.2.3.2.5.1.17ColumnprtExVc2EchoCancelerread-writecurrentEcho canceler activation. notApplicable - for VC-2 and VC-6 cards.
1.3.6.1.4.1.164.3.2.3.2.5.1.18ColumnprtExVc2IfTyperead-writecurrentInterface Type.
1.3.6.1.4.1.164.3.2.3.2.5.1.19ColumnprtExVc2Encodingread-writecurrentVoice Encoding Mode. linear - is relevant only for the ports of VC-16A card.
1.3.6.1.4.1.164.3.2.3.2.5.1.20ColumnprtExVc2TxBitCoderead-writecurrent- - - For MP & FCD - - - This object represents 4 parameters, by 2 Octets : Tx D Bit Code-MSB nibble, Tx C Bit Code- nibble, Tx B Bit Code- nibble, Tx A Bit Co…
1.3.6.1.4.1.164.3.2.3.2.5.1.21ColumnprtExVc2RxBitOutputread-writecurrent- - - For MP (VC-Q card only) & FCD - - - This object represents 3 parameters by 2 Octets: Spare -MSB nibble, always=0 hex E Lead Output - nibble, Reverse Pola…
1.3.6.1.4.1.164.3.2.3.2.5.1.22ColumnprtExVc2MeterRateread-writecurrentThis entry is applicable only for VC-6A/FXO, VC-6A/FXS, VC-8/FXO, VC-8/FXS, VC-16/FXO and VC-16/FXS. Meter Rate means rate of Call Meter in Public Phones, in K…
1.3.6.1.4.1.164.3.2.3.2.5.1.23ColumnprtExVc2IfSignalingread-writecurrentThis entry is applicable only for VC-6A, VC-6AG, VC-8/FXO, VC-8/FXS, VC-16/FXO and VC-16/FXS cards. Interface Analog Signaling. Must be the same for all card's…
1.3.6.1.4.1.164.3.2.3.2.5.1.24ColumnprtExVc2SeizeAckread-writecurrentThis parameter shows whether the device will acknowledge a seize signal (On/Off Hook). When the value is set to yes(3) & the device receives an on/off hook sig…
1.3.6.1.4.1.164.3.2.3.2.5.1.25ColumnprtExVc2EandMTyperead-writecurrentThis is the signaling type on the E&M analog side. The analog signaling includes voltage, no. of pins and other parameters.
1.3.6.1.4.1.164.3.2.3.2.5.1.26ColumnprtExVc2RemTyperead-writecurrentRemote Type. Applicable for VC-6A/4LB card & for IPMUX-1E Far End Type - E1,T1(T1-ESF) or T1-D4 .
1.3.6.1.4.1.164.3.2.3.2.5.1.27ColumnprtExVc2ConvTimeread-writecurrentConversation Time in minutes. Applicable for VC-6A/4LB card.
1.3.6.1.4.1.164.3.2.3.2.5.1.28ColumnprtExVc2SigFeedbackread-writecurrentSignaling Feedback. Applicable for VC-8/FXO and VC-16/FXO cards.
1.3.6.1.4.1.164.3.2.3.2.5.1.29ColumnprtExVc2EchoCancelerModuleread-onlycurrentThis parameter indicates whether Echo canceler module exists for this port.
1.3.6.1.4.1.164.3.2.3.2.5.1.30ColumnprtExVc2ReversePolarityread-writecurrentThis object Enables/Disables Reverse Polarity for this port.
1.3.6.1.4.1.164.3.2.3.2.5.1.31ColumnprtExVc2RingerFrequencyread-writecurrentThis object selects the Ringer Frequency (Hz) for this port.
1.3.6.1.4.1.164.3.2.3.2.5.1.32ColumnprtExVc2SigServiceread-writecurrentSignaling Service. advanced - is relevant only for ports of VC-8, VC-16 FXS cards. It is used for Signaling Services of V5.1 or R2.
1.3.6.1.4.1.164.3.2.3.2.5.1.33ColumnprtExVc2CallerIdEnableread-writecurrentThis object Enables/Disables Receiving the Caller Id number from the remote side, for this port/channel.
1.3.6.1.4.1.164.3.2.3.2.5.1.34ColumnprtExVc2CompressMethodread-writecurrentThis object is applicable only when prtExVc2Encoding=adpcm. It defines which method is used for Compression. g726 - for 4 bits (the standard method). g726 - fo…
1.3.6.1.4.1.164.3.2.3.2.5.1.35ColumnprtExVc2ObModeread-writecurrentThis object defines the Net operation mode of the Omni-Bus card's port. pointToPoint - only 2 end-point ports talk; like any other voice card omniBus - many ta…
1.3.6.1.4.1.164.3.2.3.2.5.1.36ColumnprtExVc2VADread-writecurrentThis object defines whether Voice Activation Detector (VAD) will be On or Off. off - will be usually selected when a Modem is connected to the port; not a phon…
1.3.6.1.4.1.164.3.2.3.2.5.1.37ColumnprtExVc2NoiseLevelForVADread-writecurrentThis object defines the Level of Noise on the line, the Voice Activation Detector (VAD) will have to deal with. notApplicable - when prtExVc2VAD=off.
1.3.6.1.4.1.164.3.2.3.2.5.1.38ColumnprtExVc2WesternSigModeread-writecurrentThis object defines the Western Signaling Mode. detector - detects signal and passes it as is. generator - generates the signal. notApplicable - when Western H…
1.3.6.1.4.1.164.3.2.3.2.5.1.39ColumnprtExVc2BusProtectionPointread-writecurrentThis object defines if the port is Bus Protection Point or not. notApplicable - when prtExVc2DspMode=pointToPoint. When we have a chain of devices where the ed…
1.3.6.1.4.1.164.3.2.3.2.5.1.40ColumnprtExVc2ImpedanceStandardread-writecurrentThis object defines the Standard used for Impedance. -G.712 - 600 Ohm - used in USA and other countries. -Q552/ETSI - used in some countries in Europe -Q522/It…
1.3.6.1.4.1.164.3.2.3.2.6TableprtHsfCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.6.1RowprtHsfCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.6.1.1ColumnprtHsfCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relate to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.6.1.2ColumnprtHsfSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.
1.3.6.1.4.1.164.3.2.3.2.6.1.3ColumnprtHsfPrtIdxread-onlycurrentThis attribute indicates a unique external port index. Hs2 has only two ports (exPrt1,exPrt2). Hs3 has three ports (exPrt1,exPrt2,exPrt3). Hsq and hsqN has fou…
1.3.6.1.4.1.164.3.2.3.2.6.1.4ColumnprtExHsfConnectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.6.1.5ColumnprtExHsfRateread-writecurrentThis attribute indicates the port speed.
1.3.6.1.4.1.164.3.2.3.2.6.1.6ColumnprtExHsfClkModeread-writecurrentThis attribute indicates a unique port operation clock mode.
1.3.6.1.4.1.164.3.2.3.2.6.1.7ColumnprtExHsfCtsread-writecurrentThis attribute indicates a unique CTS control line operation mode.
1.3.6.1.4.1.164.3.2.3.2.6.1.8ColumnprtExHsfFifoSizeread-writecurrentSize in bits.
1.3.6.1.4.1.164.3.2.3.2.6.1.9ColumnprtExHsfLinkToread-writedeprecatedThis attribute indicates a slot of Main Link module, that the port is linked to. This object is the same for all the ports in the specific card because of HW l…
1.3.6.1.4.1.164.3.2.3.2.6.1.10ColumnprtExHsfOperModeread-writecurrentThis object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request. bidirBcastR…
1.3.6.1.4.1.164.3.2.3.2.6.1.11ColumnprtExHsfInbandLoopbackread-writecurrentThis object indicates if Inband Loopback from the Network should be enabled or disabled.
1.3.6.1.4.1.164.3.2.3.2.6.1.12ColumnprtExHsfClkPolarityread-writecurrentThis object indicates the clock polarity. For FCD-M this object will be applicable only for the fixed HS port (the fixed port on the device).
1.3.6.1.4.1.164.3.2.3.2.6.1.13ColumnprtExHsfControlSignalread-writecurrentThis object indicates the Control Signal according to G.797 ITU-T standard. For FCD-M this object will be applicable for the fixed HS port (the fixed port on t…
1.3.6.1.4.1.164.3.2.3.2.6.1.14ColumnprtExHsfBcastRingSrcPortread-writecurrentThis object is applicable only when prtExHsfOperMode= bidirBcastRing. In this case, the values mean: - none - this port will be connected to ML in TSA as usual…
1.3.6.1.4.1.164.3.2.3.2.7NodeprtHs4Cnfg
1.3.6.1.4.1.164.3.2.3.2.7.1TableprtExHs4CnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.7.1.1RowprtExHs4CnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.7.1.1.1ColumnprtExHs4CnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.7.1.1.2ColumnprtExHs4SltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted.
1.3.6.1.4.1.164.3.2.3.2.7.1.1.3ColumnprtExHs4PrtIdxread-onlycurrentA unique identifier of the port, within the card.
1.3.6.1.4.1.164.3.2.3.2.7.1.1.4ColumnprtExHs4Connectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithm. It also affects all the module considerations because the card has …
1.3.6.1.4.1.164.3.2.3.2.7.1.1.5ColumnprtExHs4LineTyperead-writecurrentThis attribute is the line type parameter for T1/E1 interface. The user should select only the parameters relevant to the specific card: T1 line code parameter…
1.3.6.1.4.1.164.3.2.3.2.7.1.1.6ColumnprtExHs4LineCoderead-writecurrentThis attribute is the line code parameter used for T1/E1 interface. The user should select only the parameters relevant to the specific card: T1 line code para…
1.3.6.1.4.1.164.3.2.3.2.7.1.1.7ColumnprtExHs4LineLenread-writecurrentThis attribute is the line length parameter used only for T1 interfaces. len399p533ft=len-399-533ft
1.3.6.1.4.1.164.3.2.3.2.7.1.1.8ColumnprtExHs4RestoreTread-writecurrentTime passing from the disappearance of the loss of synchronization condition (red alarm), to the restoration of normal service.
1.3.6.1.4.1.164.3.2.3.2.7.1.1.9ColumnprtExHs4OosSigread-writecurrentOut of Service signal type.
1.3.6.1.4.1.164.3.2.3.2.7.1.1.10ColumnprtExHs4OosCoderead-writecurrentOOS Code
1.3.6.1.4.1.164.3.2.3.2.7.1.1.11ColumnprtExHs4IdleCoderead-writecurrentType value(00 - FF HEX), excluding 0H,8H,10H,12H,21H,24H, 42H,49H,84H,92H
1.3.6.1.4.1.164.3.2.3.2.7.1.1.12ColumnprtExHs4MfClkSrcSltread-writecurrentThis attribute indicates whether the port Tx is multiframe synchronized with Rx multiframe of another port and the slot position of that port. This opration is…
1.3.6.1.4.1.164.3.2.3.2.7.1.1.13ColumnprtExHs4MfClkSrcPrtread-writecurrentA unique number to identify a port position in the mux if the MultiFrame clock source is valid (YES). inPrt1 - for MTML-H/E1 cards.
1.3.6.1.4.1.164.3.2.3.2.7.2TableprtExHs4TsCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.7.2.1RowprtExHs4TsEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.7.2.1.1ColumnprtExHs4TsCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.7.2.1.2ColumnprtExHs4TsSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid
1.3.6.1.4.1.164.3.2.3.2.7.2.1.3ColumnprtExHs4TsPrtIdxread-onlycurrentThis attribute indicates a unique port number. Hs4/T1 and Hs4/T1 cards have only one external interface.
1.3.6.1.4.1.164.3.2.3.2.7.2.1.4ColumnprtExHs4TsIdxread-onlycurrentThis attribute indicates a unique time slot position. The valid time slots are: 1..24 for T1 Card and 1..31 for E1 interface. In G732S-E1 lines, time slot 16 i…
1.3.6.1.4.1.164.3.2.3.2.7.2.1.5ColumnprtExHs4TsIConSlotread-writecurrentThis attribute indicates whether the specified time slot is connected/routed internally in the Agent and to which card it is connected. In the ?004 Unit the en…
1.3.6.1.4.1.164.3.2.3.2.7.2.1.6ColumnprtExHs4TsIConPrtread-writecurrentThis attribute indicates the internally (In Mux) connected/routed port.
1.3.6.1.4.1.164.3.2.3.2.7.2.1.7ColumnprtExHs4TsIConTsread-writecurrentThis attribute indicates a unique time slot position. The valid time slots are: 1..24 for T1 Module and 1..31 for E1 interface. In G732S-E1 lines time slot 16 …
1.3.6.1.4.1.164.3.2.3.2.8NodeprtHsiCnfg
1.3.6.1.4.1.164.3.2.3.2.8.1TableprtExHsiCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.8.1.1RowprtExHsiCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.8.1.1.1ColumnprtExHsiCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.8.1.1.2ColumnprtExHsiSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted.
1.3.6.1.4.1.164.3.2.3.2.8.1.1.3ColumnprtExHsiPrtIdxread-onlycurrentA unique port identifier within the card. For MP : 1..12 For DXC: 111 .. 2531. See DXC R6 spec for port index convention. For FCD-A, 'S' Interface external por…
1.3.6.1.4.1.164.3.2.3.2.8.1.1.4ColumnprtExHsiConnectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms. v51 - this port is connected to a V5.1 interface. All rest of the …
1.3.6.1.4.1.164.3.2.3.2.8.1.1.5ColumnprtExHsiRateread-writecurrentThis attribute indicates the port speed.
1.3.6.1.4.1.164.3.2.3.2.8.1.1.6ColumnprtExHsiLinkToread-writedeprecatedIt indicates the slot of the main link card to which the HS-? card is mapped. STATUS deprecated - this object is replaced by prtGenCnfgLinkToSlot and prtGenCnf…
1.3.6.1.4.1.164.3.2.3.2.8.1.1.7ColumnprtExHsiInterfaceread-writecurrentIt indicates the interface type: lt = line termination nt = network termination te = terminal equipment. lt1 - for ASMi-31 connection (not ISDN) For MP: For HS…
1.3.6.1.4.1.164.3.2.3.2.8.1.1.8ColumnprtExHsiActTyperead-writecurrentIt indicates the Activation Type. Activation Type is the Synchronization type towards the PBX. It is applicable only when prtExHsiInterface=nt. notApplicable -…
1.3.6.1.4.1.164.3.2.3.2.8.2TableprtInHsiCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry. This table is not applicable for MP-2100 HS-U card type.
1.3.6.1.4.1.164.3.2.3.2.8.2.1RowprtInHsiCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.8.2.1.1ColumnprtInHsiCnfgIdxread-onlycurrentThis object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.8.2.1.2ColumnprtInHsiSltIdxread-onlycurrentThis object indicates a unique slot position where the card is inserted.
1.3.6.1.4.1.164.3.2.3.2.8.2.1.3ColumnprtInHsiPrtIdxread-onlycurrentA unique port identifier within the card. Valid values for MP: inPrt1 (101) .. inPrt48 (148). Valid values for DXC: 11012.. 25316. See DXC R6 spec for port ind…
1.3.6.1.4.1.164.3.2.3.2.8.2.1.4ColumnprtInHsiConnectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.8.2.1.5ColumnprtInHsiRateread-writecurrentThis object indicates the port speed. For HS-U/I and HS-S ports: 2 bit - up to 9600bps 4 bit - 19200bps 8 bit - 38400bps .. 64kbps. concentrated - this D chann…
1.3.6.1.4.1.164.3.2.3.2.8.2.1.6ColumnprtInHsiConcentratedToread-writecurrentThe Concentration D Channel of the prtInHsiPrtIdx port. The port always belongs to the same card as prtInHsiPrtIdx port. This object is applicable only when pr…
1.3.6.1.4.1.164.3.2.3.2.9NodeprtPVc4Cnfg
1.3.6.1.4.1.164.3.2.3.2.9.1TableprtExPVc4CnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.9.1.1RowprtExPVc4CnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.1ColumnprtExPVc4CnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.9.1.1.2ColumnprtExPVc4SltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.3ColumnprtExPVc4PrtIdxread-onlycurrentThis object indicates the port number in the selected card (slot).
1.3.6.1.4.1.164.3.2.3.2.9.1.1.4ColumnprtExPVc4PrtTyperead-writecurrentThis object indicates the type of the selected port. In Mx 30/300 phase 4: s0 & u are for Voice over ISDN. In MX 30/300 phase 5: sQsig & uQsig are used for Voi…
1.3.6.1.4.1.164.3.2.3.2.9.1.1.5ColumnprtExPVc4Connectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.6ColumnprtExPVc4IfTyperead-writecurrentThis attribute indicates the interface type of the port. eAndM4wires and eAndM2wires - are valid only for E&M port type eAndM4wires - means 2/4 wires fxoGnd an…
1.3.6.1.4.1.164.3.2.3.2.9.1.1.7ColumnprtExPVc4TxGainread-writecurrentTransmission gain in dB.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.8ColumnprtExPVc4RxGainread-writecurrentReception gain in dBm.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.9ColumnprtExPVc4MaxRateread-writecurrentVoice rate.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.10ColumnprtExPVc4Tcread-writecurrentTime interval for CIR control, in seconds. The value will be the same for all cards' ports.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.11ColumnprtExPVc4Oosread-writecurrentHandling type, when connection is lost.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.12ColumnprtExPVc4EchoCancelerread-writecurrentEcho canceler activation.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.13ColumnprtExPVc4VarDelayread-writecurrentMaximum variant delay of the FR network, in msec.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.14ColumnprtExPVc4CongLevelread-writecurrentThis object indicates the level of delayed data in precents of total available dynamic memory, for which the port will start to operate as congested. The resol…
1.3.6.1.4.1.164.3.2.3.2.9.1.1.15ColumnprtExPVc4Wireread-writecurrentThis object indicates the wiring of the E&M port. It is applicable only for E&M card type.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.16ColumnprtExPVc4ExtensionTyperead-writecurrentThis object indicates the type of extension relevant for this port. ipForceConnect (6) is used for automatic connection or automatic dialing when the phone is …
1.3.6.1.4.1.164.3.2.3.2.9.1.1.17ColumnprtExPVc4ExtensionNumberread-writecurrentThis is the extension number of this port. This field is relevant only when the extension type is voice switching and is read only if the port is member of a h…
1.3.6.1.4.1.164.3.2.3.2.9.1.1.18ColumnprtExPVc4OutPulsingread-writecurrentThis field indicates whether to outpulse the received digits. It is notApplicable(1) when the extension type is forceConnect(2).
1.3.6.1.4.1.164.3.2.3.2.9.1.1.19ColumnprtExPVc4HuntGroupMbread-writecurrentThis object indicates if this port belongs to an hunt group.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.20ColumnprtExPVc4HuntGroupIdxread-writecurrentIf it belongs to an hunt group, this fields indicates the index of the relevant hunt group. 0 = notApplicable
1.3.6.1.4.1.164.3.2.3.2.9.1.1.21ColumnprtExPVc4AutoFaxModeread-writecurrentThis object indicates if the system will switch automatically to FAX mode when detecting FAX activity. Default=Yes.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.22ColumnprtExPVc4FaxRateread-writecurrentFAX initial rate. Default=9600 bps.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.23ColumnprtExPVc4SeizeAckread-writecurrentThis parameter shows whether the device will acknowledge a seize signal (On/Off Hook). When the value is set to yes(3) & the device receives an on/off hook sig…
1.3.6.1.4.1.164.3.2.3.2.9.1.1.24ColumnprtExPVc4SignalingProtocolread-writecurrentThe signaling protocol that will be used between the PABX & the voice port. Delay Start Protocol: the line is seized by sending an Off hook signal and after a …
1.3.6.1.4.1.164.3.2.3.2.9.1.1.25ColumnprtExPVc4DelayStartread-writecurrentThis parameter is used only for Delay Protocol. This is the time that the calling party will wait after sending an Off hook signal and before sending DTMF digi…
1.3.6.1.4.1.164.3.2.3.2.9.1.1.26ColumnprtExPVc4WinkMinDurationread-writecurrentThis parameter is used only for Wink Protocol. Min Duration of the Wink Signal (off hook duration from the called party). Legal values: 40..400 msec in interva…
1.3.6.1.4.1.164.3.2.3.2.9.1.1.27ColumnprtExPVc4WinkMaxDurationread-writecurrentThis parameter is used only for Wink Protocol. Max Duration of the Wink Signal (off hook duration from the called party). Legal values: 40..400 msec in interva…
1.3.6.1.4.1.164.3.2.3.2.9.1.1.28ColumnprtExPVc4GenerateToneread-writecurrentThis parameter indicates whether the device (MX or MPH) should generate dial tones for the channel. If the value is yes (3), it generates dial tones. If the va…
1.3.6.1.4.1.164.3.2.3.2.9.1.1.29ColumnprtExPVc4CodingLawread-writecurrentThis attribute indicates the Method/Law for decoding/encoding the voice information. aLaw(1) is the standard Law for E1 links. uLaw(2) is the standard Law for …
1.3.6.1.4.1.164.3.2.3.2.9.1.1.30ColumnprtExPVc4GenerateRingBackread-writecurrentDetermines whether the Ring Back tone is generated locally or from the remote end. The default is - NO (Meaning coming from the remote end). Yes means that the…
1.3.6.1.4.1.164.3.2.3.2.9.1.1.31ColumnprtExPVc4ChannelIdread-writecurrentChannel Identifier. According to FRF11 each voice port that works as force connect should add a CH Id after the DLCI in the frame header. Default : 1 Applicabl…
1.3.6.1.4.1.164.3.2.3.2.9.1.1.32ColumnprtExPVc4PortConnectionread-writecurrentPort connection determines whether the port is connected to a PABX (Trunk) or to Telephone set (Line) . It determines whether to send certain messages to the p…
1.3.6.1.4.1.164.3.2.3.2.9.1.1.33ColumnprtExPVc4CoderAndRateread-writecurrentCoder and Rate for the Voice Compression. In MPH: Relevant for MVC-8 card only.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.34ColumnprtExPVc4DestinationNumread-writecurrentThe destination phone number: 0 to 22 digits. Applicable for Auto Dial - ipForceConnect(6), Permanent Dial and Auto Accept Extension Types. Default: Null String
1.3.6.1.4.1.164.3.2.3.2.9.1.1.35ColumnprtExPVc4DtmfRelayread-writecurrentWhen DTMF RELAY is disabled, the DTMF digits (dialed by the user) are transmitted as compressed voice and in the remote unit are decompressed. When DTMF RELAY …
1.3.6.1.4.1.164.3.2.3.2.9.1.1.36ColumnprtExPVc4DiscOnSilenceread-writecurrentNo. of silenced seconds after which the call will be disconected. A value of 0 means that there will be no disconnect when there is silence. Possible values: 0…
1.3.6.1.4.1.164.3.2.3.2.9.1.1.37ColumnprtExPVc4DynamicJitterread-writecurrentThe MVC8 uses two mechanisms to overcome the network delay. The first one is a static jitter buffer which holds a constant buffer of up to 300 Msec and can be …
1.3.6.1.4.1.164.3.2.3.2.9.1.1.38ColumnprtExPVc4EandMTyperead-writecurrentThis is the signaling type on the E&M analog side. The analog signaling includes voltage, no. of pins and other parameters.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.39ColumnprtExPVc4Rateread-writecurrentThis is the Rate of the port in TS units. It is used by VF-30 card family. 0 = NA = port is not intended to be connected; therefore, no Rate.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.40ColumnprtExPVc4FrameSizeread-writecurrentDefines the maximum size in Bytes of the multiplexed frame. In some cases this must be limited to avoid IP fragmentation, which makes the multiplexing useless,…
1.3.6.1.4.1.164.3.2.3.2.9.1.1.41ColumnprtExPVc4MultiplexIntervalread-writecurrentDefines the maximum amout of time (msec.) between multiplexed frames that are sent. For Vmux-400/420 devices: It defines the Payload Packetizing Interval. Vali…
1.3.6.1.4.1.164.3.2.3.2.9.1.1.42ColumnprtExPVc4TransportProtocolread-writecurrentTransport Protocol. ptp = point to point. aal2oMpls = AAL2 over MPLS.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.43ColumnprtExPVc4MultiFreqRelayread-writecurrentThis object enables/disables Multi Frequency Signaling Detection.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.44ColumnprtExPVc4MinPulseWidthread-writecurrentDefines the minimum Pulse Width in msec. Valid values: 45-100 msec. notApplicable=0.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.45ColumnprtExPVc4MinPowerLevelread-writecurrentDefines the minimum Power Level in dBm. Valid values: -1..-35 dBm.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.46ColumnprtExPVc4SuperTandemread-writecurrentThe Super Tandem feature provides end to end compression over multiple hops, solving the double compression problem detected in Voice compressing systems. The …
1.3.6.1.4.1.164.3.2.3.2.9.1.1.47ColumnprtExPVc4DestIpread-writecurrentThis object defines the destination IP Address.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.48ColumnprtExPVc4DestBundleread-writecurrentThis object defines the destination Bundle at the far-end device.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.49ColumnprtExPVc4SrcIpAddressread-writecurrentThis object defines the Source IP Address.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.50ColumnprtExPVc4SrcIpMaskread-writecurrentThis object defines the Source IP Mask.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.51ColumnprtExPVc4DefaultGatewayread-writecurrentThis object defines the Default Gateway for this interface.
1.3.6.1.4.1.164.3.2.3.2.9.1.1.52ColumnprtExPVc4SigPacketIntervalread-writecurrentDefines the Signaling Packetizing Interval, which is the maximum time interval, measured in msec (milliseconds), between multiplexed signaling frames.
1.3.6.1.4.1.164.3.2.3.2.9.2TableprtExPVc4DlciTablenot-accessiblecurrentThe write operation into the Table Objects is valid only at the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.9.2.1RowprtExPVc4DlciEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.9.2.1.1ColumnprtExPVc4DlciCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.9.2.1.2ColumnprtExPVc4DlciSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid
1.3.6.1.4.1.164.3.2.3.2.9.2.1.3ColumnprtExPVc4DlciPrtIdxread-onlycurrentThis attribute indicates a unique internal port number. VC4 cards have four external ports.
1.3.6.1.4.1.164.3.2.3.2.9.2.1.4ColumnprtExPVc4DlciValidread-writecurrentThis attribute indicates whether the attributes in this entry are valid or not. The user can add/delete pvc (dlci to dlci connection) by modifing this object
1.3.6.1.4.1.164.3.2.3.2.9.2.1.5ColumnprtExPVc4DlciIConSltread-writecurrentThis attribute indicates a unique slot position In the Mux (Agent) where the dlci is routed to. In the ?004 Unit the entries io6(10)..io16) are not valid
1.3.6.1.4.1.164.3.2.3.2.9.2.1.6ColumnprtExPVc4DlciIConPrtread-writecurrentThis attribute indicates a unique port id which the dlci is routed to.
1.3.6.1.4.1.164.3.2.3.2.9.2.1.7ColumnprtExPVc4DlciIConDlciread-writecurrentThis attribute indicates a unique internal connection dlci number, the dlci is routed to.
1.3.6.1.4.1.164.3.2.3.2.9.2.1.8ColumnprtExPVc4DlciTxBcread-writecurrentThis attribute indicates a unique Tx committed bandwidth on the user transmit line (or at the port receive line).
1.3.6.1.4.1.164.3.2.3.2.9.2.1.9ColumnprtExPVc4DlciTxBeread-writecurrentThis attribute indicates a unique Tx excess bandwidth on the user transmit line (or at the port receive line).
1.3.6.1.4.1.164.3.2.3.2.9.2.1.10ColumnprtExPVc4DlciRxBcread-writecurrentThis attribute indicates a unique Rx committed bandwidth on the user receive line (or at the port transmit line).
1.3.6.1.4.1.164.3.2.3.2.9.2.1.11ColumnprtExPVc4DlciRxBeread-writecurrentThis attribute indicates a unique Rx excess bandwidth on the user receive line (or at the port transmit line).
1.3.6.1.4.1.164.3.2.3.2.9.2.1.12ColumnprtExPVc4DlciPriorityread-writecurrentThis attribute indicates a unique priority of the pvc. 6 is the lowest priority and 8 is the highest priority.
1.3.6.1.4.1.164.3.2.3.2.9.2.1.13ColumnprtExPVc4DlciStatusread-onlycurrentThis attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected
1.3.6.1.4.1.164.3.2.3.2.10NodeprtHsrCnfg
1.3.6.1.4.1.164.3.2.3.2.10.1TableprtExHsrCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.10.1.1RowprtExHsrCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.10.1.1.1ColumnprtExHsrCnfgIdxread-onlycurrentThis object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.10.1.1.2ColumnprtExHsrSltIdxread-onlycurrentThis object indicates a unique slot position where the card is inserted.
1.3.6.1.4.1.164.3.2.3.2.10.1.1.3ColumnprtExHsrPrtIdxread-onlycurrentA unique prt identifier within the card. Valid values: For MP: - For HS-R cards: exPrt1 (1) .. exPrt4 (4) - For HS-U/1 cards: inPrt1 (101) .. inPrt4 (104) - Fo…
1.3.6.1.4.1.164.3.2.3.2.10.1.1.4ColumnprtExHsrConnectread-writecurrentThis object indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.10.1.1.5ColumnprtExHsrProtocolread-writecurrentThis object indicates the protocol.
1.3.6.1.4.1.164.3.2.3.2.10.1.1.6ColumnprtExHsrRateread-writecurrentThis object indicates the port speed. The 16,32,48,56,64 and 128 kbps rates are applicable only for Sync protocol. The 57.6 and 115.2 kbps rates are applicable…
1.3.6.1.4.1.164.3.2.3.2.10.1.1.7ColumnprtExHsrDataBitsread-writecurrentData Bits. This object is applicable for Async protocol only.
1.3.6.1.4.1.164.3.2.3.2.10.1.1.8ColumnprtExHsrParityread-writecurrent- For HS-R card, this object indicates if the parity bit is needed or not. Therefore, the 'no' and 'yes; values are applicable. - For HS-S12, HS-U12, the parit…
1.3.6.1.4.1.164.3.2.3.2.10.1.1.9ColumnprtExHsrStopBitsread-writecurrentThis object indicates the minimum number of stop bits in the tx async frame. This object is applicable for Async protocol only.
1.3.6.1.4.1.164.3.2.3.2.10.1.1.10ColumnprtExHsrCtsread-writecurrentCTS. This object is applicable for Async protocol only.
1.3.6.1.4.1.164.3.2.3.2.10.1.1.11ColumnprtExHsrClkModeread-writecurrentClock mode. This object is applicable for Sync protocol only.
1.3.6.1.4.1.164.3.2.3.2.10.1.1.12ColumnprtExHsrLinkToread-writedeprecatedIt indicates the slot of the main link card to which the HS-R card is mapped. notApplicable - for HS-U/1 internal ports. STATUS deprecated - this object is rep…
1.3.6.1.4.1.164.3.2.3.2.10.1.1.13ColumnprtExHsrDcdDsrread-writecurrentDCD & DSR.
1.3.6.1.4.1.164.3.2.3.2.10.1.1.14ColumnprtExHsrOperModeread-writecurrentThis object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast = Tx upon request.
1.3.6.1.4.1.164.3.2.3.2.10.1.1.15ColumnprtExHsrRtsDtrread-writecurrentRTS & DTR.
1.3.6.1.4.1.164.3.2.3.2.10.1.1.16ColumnprtExHsrLlbEnableread-writecurrentEnable/Disable LLB.
1.3.6.1.4.1.164.3.2.3.2.10.1.1.17ColumnprtExHsrRlbEnableread-writecurrentEnable/Disable RLB.
1.3.6.1.4.1.164.3.2.3.2.10.1.1.18ColumnprtExHsrRateAdaptread-writecurrentRate Adaptation - takes a low rate and adapts it to 64Kbps. This object specifies the means this adaptation is done by.
1.3.6.1.4.1.164.3.2.3.2.10.1.1.19ColumnprtExHsrRemoteModemread-writecurrentRemote modem. asmi31s2 = ASMi-31/2
1.3.6.1.4.1.164.3.2.3.2.10.1.1.20ColumnprtExHsrEncapsModeread-writecurrentLow Speed encapsulation method over PCM. When Encapsulation mode is Latency optimized, only rates up to 19.2 are supported. In this case a double number of bit…
1.3.6.1.4.1.164.3.2.3.2.11NodeprtMbeCnfg
1.3.6.1.4.1.164.3.2.3.2.11.1TableprtExMbeCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.11.1.1RowprtExMbeCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.11.1.1.1ColumnprtExMbeCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.11.1.1.2ColumnprtExMbeSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.
1.3.6.1.4.1.164.3.2.3.2.11.1.1.3ColumnprtExMbePrtIdxread-onlycurrentA unique port identifier within the card.
1.3.6.1.4.1.164.3.2.3.2.11.1.1.4ColumnprtExMbeLanread-writecurrentThis attribute indicates whether the MBE port is operated as main or remote bridge.
1.3.6.1.4.1.164.3.2.3.2.11.2TableprtInMbeCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.11.2.1RowprtInMbeCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.11.2.1.1ColumnprtInMbeCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.11.2.1.2ColumnprtInMbeSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.
1.3.6.1.4.1.164.3.2.3.2.11.2.1.3ColumnprtInMbePrtIdxread-onlycurrentA unique port identifier within the card.
1.3.6.1.4.1.164.3.2.3.2.11.2.1.4ColumnprtInMbeConnectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.11.2.1.5ColumnprtInMbeRateread-writecurrentThis attribute indicates the port speed.
1.3.6.1.4.1.164.3.2.3.2.11.2.1.6ColumnprtInMbeLinkToread-writedeprecatedIt indicates the slot of the main link card to which the MBE card is mapped. In the ?004 Unit the entries io6(10)..io16) are not valid. STATUS deprecated - thi…
1.3.6.1.4.1.164.3.2.3.2.12NodeprtTreCnfg
1.3.6.1.4.1.164.3.2.3.2.12.1TableprtExTreCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.12.1.1RowprtExTreCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.12.1.1.1ColumnprtExTreCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.12.1.1.2ColumnprtExTreSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.
1.3.6.1.4.1.164.3.2.3.2.12.1.1.3ColumnprtExTrePrtIdxread-onlycurrentA unique port identifier within the card.
1.3.6.1.4.1.164.3.2.3.2.12.1.1.4ColumnprtExTreLanread-writecurrentThis attribute indicates whether the TRE port is operated as main or remote bridge. Default=remote.
1.3.6.1.4.1.164.3.2.3.2.12.1.1.5ColumnprtExTreLanRateread-writecurrentThis attribute indicates the Rate of the TRE port in Mbit/sec. Default-r4M.
1.3.6.1.4.1.164.3.2.3.2.12.2TableprtInTreCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.12.2.1RowprtInTreCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.12.2.1.1ColumnprtInTreCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.12.2.1.2ColumnprtInTreSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io16) are not valid.
1.3.6.1.4.1.164.3.2.3.2.12.2.1.3ColumnprtInTrePrtIdxread-onlycurrentA unique port identifier within the card.
1.3.6.1.4.1.164.3.2.3.2.12.2.1.4ColumnprtInTreConnectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.12.2.1.5ColumnprtInTreRateread-writecurrentThis attribute indicates the port speed.
1.3.6.1.4.1.164.3.2.3.2.12.2.1.6ColumnprtInTreLinkToread-writedeprecatedIt indicates the slot of the main link card to which the MBE card is mapped. In the ?004 Unit the entries io6(10)..io16) are not valid. STATUS deprecated - thi…
1.3.6.1.4.1.164.3.2.3.2.13NodeprtLs6Cnfg
1.3.6.1.4.1.164.3.2.3.2.13.1TableprtExLs6CnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.13.1.1RowprtExLs6CnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.13.1.1.1ColumnprtExLs6CnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.13.1.1.2ColumnprtExLs6SltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.
1.3.6.1.4.1.164.3.2.3.2.13.1.1.3ColumnprtExLs6PrtIdxread-onlycurrentThis attribute indicates a unique port index.
1.3.6.1.4.1.164.3.2.3.2.13.1.1.4ColumnprtExLs6Connectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.13.1.1.5ColumnprtExLs6Protocolread-writecurrentThis attribute indicates the protocol. async - can be selected only for ports 1-2.
1.3.6.1.4.1.164.3.2.3.2.13.1.1.6ColumnprtExLs6Rateread-writecurrentPort rates in bps. g1 - contains the values : (2)-(6),(9),(12),(16) g2 - contains the values : (7),(10),(14),(19) g3 - contains the values : (8),(11),(13),(15)…
1.3.6.1.4.1.164.3.2.3.2.13.1.1.7ColumnprtExLs6ClkModeread-writecurrentThis attribute indicates a unique port operation clock mode. It is applicable for Sync protocol only .
1.3.6.1.4.1.164.3.2.3.2.13.1.1.8ColumnprtExLs6CtrlSignalread-writecurrentControl Signal.
1.3.6.1.4.1.164.3.2.3.2.13.1.1.9ColumnprtExLs6DataBitsread-writecurrentData Bits. This object is applicable for Async protocol only.
1.3.6.1.4.1.164.3.2.3.2.13.1.1.10ColumnprtExLs6Ctsread-writecurrentThis object indicates the CTS control line operation mode.
1.3.6.1.4.1.164.3.2.3.2.13.1.1.11ColumnprtExLs6LinkToInternalread-writecurrentThis object indicates which internal port of the card, the external port is linked to.
1.3.6.1.4.1.164.3.2.3.2.13.2TableprtExLs6VCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.13.2.1RowprtExLs6VCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.13.2.1.1ColumnprtExLs6VCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.13.2.1.2ColumnprtExLs6VSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.
1.3.6.1.4.1.164.3.2.3.2.13.2.1.3ColumnprtExLs6VPrtIdxread-onlycurrentA unique identifier of the port, within the card.
1.3.6.1.4.1.164.3.2.3.2.13.2.1.4ColumnprtExLs6VConnectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.13.2.1.5ColumnprtExLs6VRateread-writecurrentRate (bps) used for FAX transmission and Voice coding.
1.3.6.1.4.1.164.3.2.3.2.13.2.1.6ColumnprtExLs6VEchoCancelerread-writecurrentEcho canceler activation.
1.3.6.1.4.1.164.3.2.3.2.13.2.1.7ColumnprtExLs6VIfTyperead-writecurrentThis attribute indicates the interface type of the port. w4wire - is applicable only for E&M port type.
1.3.6.1.4.1.164.3.2.3.2.13.2.1.8ColumnprtExLs6VTxGainread-writecurrentTransmit gain in dBm. E&M - values range: -17 .. 8 FXO - values range: -16 .. 4 FXS - values range: -13 .. 8
1.3.6.1.4.1.164.3.2.3.2.13.2.1.9ColumnprtExLs6VRxGainread-writecurrentReceive gain in dBm. E&M - values range: -17 .. 2 FXO - values range: -17 .. -1 FXS - values range: -17 .. 2
1.3.6.1.4.1.164.3.2.3.2.13.2.1.10ColumnprtExLs6VOosread-writecurrentOut of Service signaling mode.
1.3.6.1.4.1.164.3.2.3.2.13.3TableprtInLs6CnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.13.3.1RowprtInLs6CnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.13.3.1.1ColumnprtInLs6CnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.13.3.1.2ColumnprtInLs6SltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.
1.3.6.1.4.1.164.3.2.3.2.13.3.1.3ColumnprtInLs6PrtIdxread-onlycurrentThis attribute indicates a unique internal port index.
1.3.6.1.4.1.164.3.2.3.2.13.3.1.4ColumnprtInLs6Connectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms. It also affects all the module considerations because the module h…
1.3.6.1.4.1.164.3.2.3.2.13.3.1.5ColumnprtInLs6TandemModeread-writecurrentThis object indicates the Tandem Mode. tandemSlave - is valid only for an LS-6 card having on the (current slot-1) an LS-6 card with 'tandemMaster' mode.
1.3.6.1.4.1.164.3.2.3.2.13.3.1.6ColumnprtInLs6Rateread-writecurrentMain Rate in Kbps.
1.3.6.1.4.1.164.3.2.3.2.13.3.1.7ColumnprtInLs6RemoteTyperead-writecurrentRemote Type. notApplicable - when prtInLs6TandemMode=tandemSlave
1.3.6.1.4.1.164.3.2.3.2.13.3.1.8ColumnprtInLs6LinkToread-writedeprecatedIt indicates the slot of the main link card to which the Ls6 card is mapped. In the ?004 Unit the entries io6(10)..io12(16) are not valid. notApplicable - when…
1.3.6.1.4.1.164.3.2.3.2.14NodeprtVc3Cnfg
1.3.6.1.4.1.164.3.2.3.2.14.1TableprtExVc3CnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.14.1.1RowprtExVc3CnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.14.1.1.1ColumnprtExVc3CnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.14.1.1.2ColumnprtExVc3SltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.
1.3.6.1.4.1.164.3.2.3.2.14.1.1.3ColumnprtExVc3PrtIdxread-onlycurrentA unique identifier of the port, within the card.
1.3.6.1.4.1.164.3.2.3.2.14.1.1.4ColumnprtExVc3Connectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.14.1.1.5ColumnprtExVc3TransGainread-writecurrentTransmit gain in dBm.
1.3.6.1.4.1.164.3.2.3.2.14.1.1.6ColumnprtExVc3ReceiveGainread-writecurrentReceive gain in dBm.
1.3.6.1.4.1.164.3.2.3.2.14.1.1.7ColumnprtExVc3Wireread-writecurrentThis object is equal for all the ports in the specific card because of HW limitations
1.3.6.1.4.1.164.3.2.3.2.14.1.1.8ColumnprtExVc3Rateread-writecurrentRate in bps.
1.3.6.1.4.1.164.3.2.3.2.14.1.1.9ColumnprtExVc3EchoCancelerread-writecurrentEcho canceler activation. The value will be the same for all the card's external ports.
1.3.6.1.4.1.164.3.2.3.2.14.2TableprtInVc3CnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.14.2.1RowprtInVc3CnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.14.2.1.1ColumnprtInVc3CnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.14.2.1.2ColumnprtInVc3SltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.
1.3.6.1.4.1.164.3.2.3.2.14.2.1.3ColumnprtInVc3PrtIdxread-onlycurrentA unique identifier of the port, within the card.
1.3.6.1.4.1.164.3.2.3.2.14.2.1.4ColumnprtInVc3Connectread-writecurrentThis attribute indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.14.2.1.5ColumnprtInVc3Rateread-writecurrentRate in bps.
1.3.6.1.4.1.164.3.2.3.2.14.2.1.6ColumnprtInVc3Oosread-writecurrentThis object is equal for all the ports in the specific card because of HW limitations
1.3.6.1.4.1.164.3.2.3.2.14.2.1.7ColumnprtInVc3LinkToread-writedeprecatedThis attribute indicates the slot of the ML card to which the VC card is mapped. In the ?004 Unit the entries io6(10)..io12(16) are not valid. STATUS deprecate…
1.3.6.1.4.1.164.3.2.3.2.15NodeprtVcPbxCnfg
1.3.6.1.4.1.164.3.2.3.2.15.1TableprtExVcPbxCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.15.1.1RowprtExVcPbxCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.15.1.1.1ColumnprtExVcPbxCnfgIdxread-onlycurrentThis object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.15.1.1.2ColumnprtExVcPbxSltIdxread-onlycurrentThis object indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.
1.3.6.1.4.1.164.3.2.3.2.15.1.1.3ColumnprtExVcPbxPrtIdxread-onlycurrentA unique identifier of the port, within the card.
1.3.6.1.4.1.164.3.2.3.2.15.1.1.4ColumnprtExVcPbxConnectread-writecurrentThis object indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.15.1.1.5ColumnprtExVcPbxGroupread-onlycurrentThe group object links together several VC-PBX cards, concerning compression of the same input T1/E1 link time-slots. When ports of different slots have the sa…
1.3.6.1.4.1.164.3.2.3.2.15.1.1.6ColumnprtExVcPbxTransparentread-writecurrentThis object indicates whether the Transparent transfer of Time-Slots is required or not. Time-Slots transferred by Transparent, will not be compressed. no - ap…
1.3.6.1.4.1.164.3.2.3.2.15.1.1.7ColumnprtExVcPbxTransSignalTsread-writecurrentThis object specifies the ML Time-Slot dedicated to the signaling of the PABX Transparent TSs. None = 255. When prtExVcPbxTransparent=no this object's value=No…
1.3.6.1.4.1.164.3.2.3.2.15.1.1.8ColumnprtExVcPbxFrameread-writecurrentThis object is the frame parameter for T1/E1 interface. The user should select only the parameters which are relevant to the specific card: T1 values for the V…
1.3.6.1.4.1.164.3.2.3.2.15.1.1.9ColumnprtExVcPbxRestoreTimeread-writecurrentThe time passing from the disappearance of the loss of synchronization condition (red alarm) to the restoration of normal service. The options 1secFast(2) and …
1.3.6.1.4.1.164.3.2.3.2.15.1.1.10ColumnprtExVcPbxLineCoderead-writecurrentThis object is the line code parameter used for T1/E1 interface. The user should select only the parameters which are relevant to the specific card: T1 line co…
1.3.6.1.4.1.164.3.2.3.2.15.1.1.11ColumnprtExVcPbxLineLengthread-writecurrentThis object is the line length parameter. It is applicable only for the VC-PBX/T1 card. notApplicable - for the VC-PBX and VC-PBX/E1 card. lenXXXpXXXft = len-X…
1.3.6.1.4.1.164.3.2.3.2.15.1.1.12ColumnprtExVcPbxLinkToread-writedeprecatedThis object indicates the slot of the ML card to which the VC-PBX/T1, VC-PBX/E1 card Transparent TSs are mapped. notApplicable - for VC-PBX card AND for VC-PBX…
1.3.6.1.4.1.164.3.2.3.2.15.1.1.13ColumnprtExVcPbxSignalOperread-writecurrentThis object indicates the Signaling Operation of the VC-PBX/T1, VC-PBX/E1 external port. notApplicable - for VC-PBX card normal - all 4 signaling bits are tran…
1.3.6.1.4.1.164.3.2.3.2.15.1.1.14ColumnprtExVcPbxIdleCoderead-writecurrentDetermines the code for transmission in empty time slots. notApplicable - for VC-PBX card .
1.3.6.1.4.1.164.3.2.3.2.15.2TableprtIn1p6VcPbxCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.15.2.1RowprtIn1p6VcPbxCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.15.2.1.1ColumnprtIn1p6VcPbxCnfgIdxread-onlycurrentThis object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.15.2.1.2ColumnprtIn1p6VcPbxSltIdxread-onlycurrentThis object indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.
1.3.6.1.4.1.164.3.2.3.2.15.2.1.3ColumnprtIn1p6VcPbxPrtIdxread-onlycurrentA unique identifier of the port, within the card.
1.3.6.1.4.1.164.3.2.3.2.15.2.1.4ColumnprtIn1p6VcPbxConnectread-writecurrentThis object indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.15.2.1.5ColumnprtIn1p6VcPbxRateread-writecurrentThis object indicates the port Rate. For Normal mode (prtIn7p8VcPbxMode=normal), only part of the values are valid (constant rate). For Server mode (prtIn7p8Vc…
1.3.6.1.4.1.164.3.2.3.2.15.2.1.6ColumnprtIn1p6VcPbxEchoCancelerread-writecurrentEcho canceler activation.
1.3.6.1.4.1.164.3.2.3.2.15.2.1.7ColumnprtIn1p6VcPbxPabxTsread-onlycurrentThis object defines the PABX Time-Slot assigned to this internal port. For a T1 link, the valid values are: 1 .. 24. For an E1 link, the valid values are: 1 ..…
1.3.6.1.4.1.164.3.2.3.2.15.3TableprtIn7p8VcPbxCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.15.3.1RowprtIn7p8VcPbxCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.15.3.1.1ColumnprtIn7p8VcPbxCnfgIdxread-onlycurrentThis object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg
1.3.6.1.4.1.164.3.2.3.2.15.3.1.2ColumnprtIn7p8VcPbxSltIdxread-onlycurrentThis object indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid.
1.3.6.1.4.1.164.3.2.3.2.15.3.1.3ColumnprtIn7p8VcPbxPrtIdxread-onlycurrentA unique identifier of the port, within the card.
1.3.6.1.4.1.164.3.2.3.2.15.3.1.4ColumnprtIn7p8VcPbxConnectread-writecurrentThis object indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.15.3.1.5ColumnprtIn7p8VcPbxModeread-writecurrentThis object indicates the working mode of the port: - normal - the compressed voice will be sent to an MTML card inside the Mux. - server - the compressed voic…
1.3.6.1.4.1.164.3.2.3.2.15.3.1.6ColumnprtIn7p8VcPbxRateread-writecurrentThis object indicates the port Main Rate. For Server mode (prtIn7p8VcPbxMode=server), the value will be notApplicable.
1.3.6.1.4.1.164.3.2.3.2.15.3.1.7ColumnprtIn7p8VcPbxSignalModeread-writecurrentThis object indicates the Signal Mode. For Server mode (prtIn7p8VcPbxMode=server), the only valid values are: - none - aBit
1.3.6.1.4.1.164.3.2.3.2.15.3.1.8ColumnprtIn7p8VcPbxOosread-writecurrentOut of service Signaling mode.
1.3.6.1.4.1.164.3.2.3.2.15.3.1.9ColumnprtIn7p8VcPbxLinkToread-writedeprecatedThis object indicates the slot of the ML card to which the VC card is mapped. In the ?004 Unit the entries io6(10)..io12(16) are not valid. For Server mode (pr…
1.3.6.1.4.1.164.3.2.3.2.15.4TableprtExVcPbxTsTablenot-accessiblecurrentThe write operation into the table objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.15.4.1RowprtExVcPbxTsEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.15.4.1.1ColumnprtExVcPbxTsCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.15.4.1.2ColumnprtExVcPbxTsSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid
1.3.6.1.4.1.164.3.2.3.2.15.4.1.3ColumnprtExVcPbxTsPrtIdxread-onlycurrentThis attribute indicates a unique port number. VCPBX/E1, VCPBX/T1, VFPBX/E1, VFPBX/T1, VF-24/T1 and VF-30 cards have only one external interface. VF-48/T1 and …
1.3.6.1.4.1.164.3.2.3.2.15.4.1.4ColumnprtExVcPbxTsIdxread-onlycurrentThis attribute indicates a unique PABX time slot position. The valid time slots are 1..24 for T1 cards and 1..31 for E1 cards.
1.3.6.1.4.1.164.3.2.3.2.15.4.1.5ColumnprtExVcPbxTsModeread-writecurrentThis attribute indicates the usage, process and way of the specific PABX TS towards its destination: unused - the TS is not used (no processing, no destination…
1.3.6.1.4.1.164.3.2.3.2.15.4.1.6ColumnprtExVcPbxTsIConSlotread-writecurrentFor VF-PBX cards, the io1..io12 values are applicable only when prtExVcPbxTsMode=compressed. Otherwise, its value should be noConnect. For VF-24/30/48/60 cards…
1.3.6.1.4.1.164.3.2.3.2.15.4.1.7ColumnprtExVcPbxTsIConPrtread-writecurrentThis attribute indicates the port to which this TS is connected. For VF-PBX cards, only inPrt1..inPrt6 ports are valid. For VF-24/30/48/60 cards: - for prtExVc…
1.3.6.1.4.1.164.3.2.3.2.15.4.1.8ColumnprtExVcPbxTsIConTsread-writecurrentThis attribute indicates the ML TS to which this TS is connected. This object is not applicable for VF-PBX cards. For VF-24/30/48/60 cards it is applicable onl…
1.3.6.1.4.1.164.3.2.3.2.15.4.1.9ColumnprtExVcPbxTsRemPrtread-writecurrentThis attribute indicates the end-point port on the Remote unit. VF-24/T1 and VF-30/E1 cards have one external interface. VF-48/T1 and VF-60/E1 cards have two e…
1.3.6.1.4.1.164.3.2.3.2.15.4.1.10ColumnprtExVcPbxTsRemTsread-writecurrentThis attribute indicates the end-point TS on the Remote unit. The valid time slots are 1..24 for T1 ports and 1..31 for E1 ports. notApplicable - 255.
1.3.6.1.4.1.164.3.2.3.2.15.4.1.11ColumnprtExVcPbxTsRemConnIDread-writecurrentThis attribute indicates the Connection ID with the Remote unit. notApplicable = 0.
1.3.6.1.4.1.164.3.2.3.2.15.4.1.12ColumnprtExVcPbxTsSourceSlotread-writecurrentFor VFS cards. These cards offer Compresed Voice Services for Analog Voice ports of the MP. This object indicates the Source Slot of the Analog Voice port we w…
1.3.6.1.4.1.164.3.2.3.2.15.4.1.13ColumnprtExVcPbxTsSourcePrtread-writecurrentFor VFS cards. These cards offer Compresed Voice Services for Analog Voice ports of the MP. This object indicates the Source Port within the Slot of the Analog…
1.3.6.1.4.1.164.3.2.3.2.16NodeprtIsdnCnfg
1.3.6.1.4.1.164.3.2.3.2.16.1TableprtIsdnCnfgTablenot-accessiblecurrentThe write operation into the table objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.16.1.1RowprtIsdnCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.16.1.1.1ColumnprtIsdnCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.16.1.1.2ColumnprtIsdnSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In the ?004 Unit the entries io6(10)..io12(16) are not valid For KM2100/4 Valid ent…
1.3.6.1.4.1.164.3.2.3.2.16.1.1.3ColumnprtIsdnPrtIdxread-onlycurrentThis attribute indicates a unique port number. For MAXcess the values will be: exPrt1(1), exPrt2(2), exPrt3(3), exPrt4(4), For KM-2100 the port index is calcul…
1.3.6.1.4.1.164.3.2.3.2.16.1.1.4ColumnprtIsdnConnectread-writecurrentThis attribute indicates if the port is connected.
1.3.6.1.4.1.164.3.2.3.2.16.1.1.5ColumnprtIsdnSignalingProtocolread-writecurrentThis attribute fixes which signaling protocol is used at this port (D-Channel). It is equivalent to isdnSignalingProtocol in the isdn MIB.
1.3.6.1.4.1.164.3.2.3.2.16.1.1.6ColumnprtIsdnBasicRateLineTopologyread-writecurrentThis attribute is relevant for ISDN BRI only. It is equivalent to isdnBasicRateLineTopology in the isdn MIB.
1.3.6.1.4.1.164.3.2.3.2.16.1.1.7ColumnprtIsdnModeread-writecurrentThis attribute allows the user to configure the port as leased(2) in case of connection to a TDM network.
1.3.6.1.4.1.164.3.2.3.2.16.1.1.8ColumnprtIsdnFilterread-writecurrentThis attribute allows the user to configure the port: answerAll(2): accept all incoming calls, rejectAll(3): reject all incoming calls, selective(4): accept or…
1.3.6.1.4.1.164.3.2.3.2.16.1.1.9ColumnprtIsdnSimultaneousCallread-writecurrentIn case of simultaneous call (local,remote and remote,local): accept(2): accept the incoming call, reject(3): reject the incoming call.
1.3.6.1.4.1.164.3.2.3.2.16.1.1.10ColumnprtIsdnNumOfAbstractTermread-writecurrentAn object for KM2100/4 agents. 255=Not Applicable When ISDN Standard = ETSI or NTT (European) the value should be 255 (NotApplicable) else If ML speed is 64Kbp…
1.3.6.1.4.1.164.3.2.3.2.16.1.1.11ColumnprtIsdnSwitchModeread-writecurrentFor KM2100. auto - The call is initiated automatically by one of the IO cards connected to KML.10(ISDN card) having ISDN Switch Mode. manual - The call is init…
1.3.6.1.4.1.164.3.2.3.2.16.1.1.12ColumnprtIsdnAbSideread-writecurrentThis parameter indicates the QSIG side in layer 3. This definition is from the QSIG Standard.
1.3.6.1.4.1.164.3.2.3.2.16.1.1.13ColumnprtIsdnQsigRoleread-writecurrentThis parameter indicates the QSIG side in layer 1 & 2.
1.3.6.1.4.1.164.3.2.3.2.16.1.1.14ColumnprtIsdnInterfaceread-writecurrentIt indicates the interface type: lt = line termination nt = network termination te = terminal equipment.
1.3.6.1.4.1.164.3.2.3.2.16.1.1.15ColumnprtIsdnCallModeread-writecurrentThis object indicates the acceptance of incoming calls. Initiate - Callout Listen - Callin.
1.3.6.1.4.1.164.3.2.3.2.16.1.1.16ColumnprtIsdnCallBackTimeoutread-writecurrentThis object is applicable only if 'prtIsdnFilter' is 'CallBack' and determines how long to wait from receiving the incoming call until initiating the call back…
1.3.6.1.4.1.164.3.2.3.2.16.2TableprtIsdnEndpointTablenot-accessiblecurrentThe write operation into the table objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.16.2.1RowprtIsdnEndpointEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.16.2.1.1ColumnprtIsdnEndpointCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.16.2.1.2ColumnprtIsdnEndpointSltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. In ?004 Unit the entries io6(10)..io12(16) are not valid For KM2100/4 Valid entries…
1.3.6.1.4.1.164.3.2.3.2.16.2.1.3ColumnprtIsdnEndpointPrtIdxread-onlycurrentThis attribute indicates a unique port number. For MAXcess the values will be: exPrt1(1), exPrt2(2), exPrt3(3), exPrt4(4), For KM-2100 the port index is calcul…
1.3.6.1.4.1.164.3.2.3.2.16.2.1.4ColumnprtIsdnEndpointIdxread-onlycurrentSince more than one endpoint may be defined per isdn entity, this field is a simple index. It corresponds to isdnEndpointIdx in the isdn MIB.
1.3.6.1.4.1.164.3.2.3.2.16.2.1.5ColumnprtIsdnEndpointTeiTyperead-createcurrentThe type of TEI (Terminal Endpoint Identifier) used for this Terminal Endpoint. In case of dynamic(1), the TEI value is selected by the switch. In case of stat…
1.3.6.1.4.1.164.3.2.3.2.16.2.1.6ColumnprtIsdnEndpointTeiValueread-createcurrentWhen the TEI Type is static, the value of the TEI should be between 0 and 63. Else, it is not selectable by user. 255 = notApplicable. It corresponds to isdnEn…
1.3.6.1.4.1.164.3.2.3.2.16.2.1.7ColumnprtIsdnEndpointSpidread-createcurrentThe Service profile IDentifier (SPID) information for this Terminal Endpoint. It is is composed of 9-20 numeric characters. It corresponds to isdnEndpointSpid …
1.3.6.1.4.1.164.3.2.3.2.16.2.1.8ColumnprtIsdnEndpointBearerChread-createcurrentThis is the selected dialing channel. anyChannel - the system selects the dialing channel.
1.3.6.1.4.1.164.3.2.3.2.16.2.1.9ColumnprtIsdnEndpointRowStatusread-createcurrentThis field indicates whether to consider this endpoint or not. The only possible supported RowStatus vaules are active (1) and destroy (6).
1.3.6.1.4.1.164.3.2.3.2.16.3TableprtIsdnDirectoryTablenot-accessiblecurrentThe write operation into the table objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.16.3.1RowprtIsdnDirectoryEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.16.3.1.1ColumnprtIsdnDirectoryCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.16.3.1.2ColumnprtIsdnDirectorySltIdxread-onlycurrentThis attribute indicates a unique slot position where the card is inserted. For MX300/30 ports: io1(5) = isdn1(5) and io2(6) = isdn2(6). In ?004 Unit the entri…
1.3.6.1.4.1.164.3.2.3.2.16.3.1.3ColumnprtIsdnDirectoryPrtIdxread-onlycurrentFor MAXcess this is the internal port number: 101, 102,.... For KM-2100 the port index is calculated as follows: 100*Slot+Ch
1.3.6.1.4.1.164.3.2.3.2.16.3.1.4ColumnprtIsdnDirectoryLocalAddrread-createcurrentThis is the local address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank (20 characters)
1.3.6.1.4.1.164.3.2.3.2.16.3.1.5ColumnprtIsdnDirectoryLocalSubAddrread-createcurrentThis is the local subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters)
1.3.6.1.4.1.164.3.2.3.2.16.3.1.6ColumnprtIsdnDirectoryRemoteAddrread-createcurrentThis is the remote address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank (20 characters)
1.3.6.1.4.1.164.3.2.3.2.16.3.1.7ColumnprtIsdnDirectoryRemoteSubAddrread-createcurrentThis is the remote subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters)
1.3.6.1.4.1.164.3.2.3.2.16.3.1.8ColumnprtIsdnDirectoryPrtNuread-createcurrentThis is the external port number connected to this entry.
1.3.6.1.4.1.164.3.2.3.2.16.3.1.9ColumnprtIsdnDirectoryTeiIdread-createcurrentThis is the abstract terminal id if relevant, connected to this entry.
1.3.6.1.4.1.164.3.2.3.2.16.3.1.10ColumnprtIsdnDirectoryRowStatusread-createcurrentThis is the status for the row. It allows to know whether to consider this row or not. The only possible supported RowStatus vaules are active (1) and destroy …
1.3.6.1.4.1.164.3.2.3.2.16.3.1.11ColumnprtIsdnDirectoryLocalAddr2read-createcurrentThis is the second local address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank (20 characters)
1.3.6.1.4.1.164.3.2.3.2.16.3.1.12ColumnprtIsdnDirectoryLocalSubAddr2read-createcurrentThis is the second local subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters)
1.3.6.1.4.1.164.3.2.3.2.16.3.1.13ColumnprtIsdnDirectoryRemoteAddr2read-createcurrentThis is the second remote address associated with this entry. - For MX: Size=17 , Default=0 (17 characters) - For KM: Size=20, Default=blank(20 characters)
1.3.6.1.4.1.164.3.2.3.2.16.3.1.14ColumnprtIsdnDirectoryRemoteSubAddr2read-createcurrentThis is the second remote subaddress associated with this entry. - For MX: Size=6 , Default=0 (6 characters) - For KM: Size=4 , Default=blank (4 characters)
1.3.6.1.4.1.164.3.2.3.2.17NodeprtLogicalCnfg
1.3.6.1.4.1.164.3.2.3.2.17.1TableprtLogicalCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.17.1.1RowprtLogicalCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.17.1.1.1ColumnprtLogicalCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.17.1.1.2ColumnprtLogicalSltIdxread-onlycurrentSlot Index. For ISDN BRI Ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6).
1.3.6.1.4.1.164.3.2.3.2.17.1.1.3ColumnprtLogicalPrtIdxread-onlycurrentThis attribute indicates a unique port number. This port number should be an internal port number: inPrt1(101)->inPrt50(150), linkSel1(200)->linkSel50(250), en…
1.3.6.1.4.1.164.3.2.3.2.17.1.1.4ColumnprtLogicalConnectread-createcurrentThis attribute indicates whether the port should be considered in any of the mux algorithms.
1.3.6.1.4.1.164.3.2.3.2.17.1.1.5ColumnprtLogicalFunctionread-createcurrentThis parameter defines the function of the relevant channel.
1.3.6.1.4.1.164.3.2.3.2.17.1.1.6ColumnprtLogicalRowStatusread-createcurrentThis parameter allows the NMS to create/delete logical ports. The only possible supported RowStatus vaules are active (1) and destroy (6).
1.3.6.1.4.1.164.3.2.3.2.17.2TablelinkSelectorCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.17.2.1RowlinkSelectorCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.17.2.1.1ColumnlinkSelectorCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.17.2.1.2ColumnlinkSelectorSltIdxread-onlycurrentSlot Index
1.3.6.1.4.1.164.3.2.3.2.17.2.1.3ColumnlinkSelectorPrtIdxread-onlycurrentThis attribute indicates a unique port number. This port number should be internal port number: higher or equal to linkSeL1(201).
1.3.6.1.4.1.164.3.2.3.2.17.2.1.4ColumnlinkSelectorMaxIdleTimeread-writecurrentMove to higher prioritized connected link after this period of seconds of silence on the current link. 0=move immediately to higher prioritized connected link.…
1.3.6.1.4.1.164.3.2.3.2.17.2.1.5ColumnlinkSelectorModeread-writecurrentIf the link selector is in mode: backup(2)=then the link with the lower priority will be used in case of failure of the higher priority link, bod(3)=bandwidth …
1.3.6.1.4.1.164.3.2.3.2.17.2.1.6ColumnlinkSelectorRevertread-writecurrentIf the link selector is in mode backup: auto(2)=return automatically to Main link when it is OK. manual(3)=stays connected to backup link.
1.3.6.1.4.1.164.3.2.3.2.17.2.1.7ColumnlinkSelectorMinBUSessionread-writecurrentMinimum duration of a backup session before returning to Main Link. Relevant in Backup Mode and when Revert is auto(2). Value 255 is for NEVER which means neve…
1.3.6.1.4.1.164.3.2.3.2.17.3TablelinkSelectorPLinkTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.17.3.1RowlinkSelectorPLinkEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.17.3.1.1ColumnpLinkCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.17.3.1.2ColumnpLinkSltIdxread-onlycurrentSlot Index
1.3.6.1.4.1.164.3.2.3.2.17.3.1.3ColumnpLinkPrtIdxread-onlycurrentThis attribute indicates a unique port number. This port number should be the link selector number.
1.3.6.1.4.1.164.3.2.3.2.17.3.1.4ColumnpLinkIdxread-onlycurrentThis index is the row number.
1.3.6.1.4.1.164.3.2.3.2.17.3.1.5ColumnpLinkSlotNuread-writecurrentThe slot of the prioritized link. For ISDN BRI ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6).
1.3.6.1.4.1.164.3.2.3.2.17.3.1.6ColumnpLinkPortNuread-writecurrentThe port of the prioritized link. Value 100 is for noConnect.
1.3.6.1.4.1.164.3.2.3.2.17.3.1.7ColumnpLinkPrioNuread-writecurrentThe priority of the prioritized link. MIN=1...., MAX=8.
1.3.6.1.4.1.164.3.2.3.2.17.3.1.8ColumnpLinkVRateread-writecurrentThe rate to use with this link.
1.3.6.1.4.1.164.3.2.3.2.18NodeprtFrPlusCnfg
1.3.6.1.4.1.164.3.2.3.2.18.1TableprtFrPlusCnfgTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry.
1.3.6.1.4.1.164.3.2.3.2.18.1.1RowprtFrPlusCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.18.1.1.1ColumnprtFrPlusCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.18.1.1.2ColumnprtFrPlusSltIdxread-onlycurrentSlot Index. For ISDN BRI Ports of MX300/30, io1(5) = isdn1(5) and io2(6) = isdn2(6).
1.3.6.1.4.1.164.3.2.3.2.18.1.1.3ColumnprtFrPlusPrtIdxread-onlycurrentThis attribute indicates a unique port number. This port number should be: - for ISDN cards: inPrt1(101)->inPrt50(150) - for MHS1 card : exPrt1(1) - for MHS3, …
1.3.6.1.4.1.164.3.2.3.2.18.1.1.4ColumnprtFrPlusNotSegmentedPrioritiesread-writecurrentThis parameter is relevant only for FR+ protocol and asks the MXcess NOT to segment data with specified priorities: from LSB: bit 1 is for priority 1, bit 2 is…
1.3.6.1.4.1.164.3.2.3.2.19NodeprtMl4Cnfg
1.3.6.1.4.1.164.3.2.3.2.19.1TableprtMl4CnfgTablenot-accessiblecurrentThis is an extension table for MTML-4 card parameters.
1.3.6.1.4.1.164.3.2.3.2.19.1.1RowprtMl4CnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.19.1.1.1ColumnprtMl4CnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.19.1.1.2ColumnprtMl4SltIdxread-onlycurrentThis attribute indicates a unique slot position where the module is inserted.
1.3.6.1.4.1.164.3.2.3.2.19.1.1.3ColumnprtMl4PrtIdxread-onlycurrentThis attribute indicates a unique port number.
1.3.6.1.4.1.164.3.2.3.2.19.1.1.4ColumnprtMl4SigProfileread-writecurrentThis object indicates the Signaling Profile of the port. none - when the Frame is G732N (no MF) or Unframed. p1 = profile 1 p2 = profile 2 p3 = profile 3 p4 = …
1.3.6.1.4.1.164.3.2.3.2.19.1.1.5ColumnprtMl4CGAread-writecurrentThis object selects the method used to signal the CGA state to the other end, through the main link. 'none' - non-transparent mode. When one of the links (main…
1.3.6.1.4.1.164.3.2.3.2.19.1.1.6ColumnprtMl4Oosread-writecurrent'idle' = '0' = on-hook, idle state 'busy' = '1' = off-hook, busy state 'forcedIdle' = SP = both A and B signaling bits are forced to '0' during out-of-service …
1.3.6.1.4.1.164.3.2.3.2.19.1.1.7ColumnprtMl4VoiceOosread-writecurrentVoice Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0.
1.3.6.1.4.1.164.3.2.3.2.19.1.1.8ColumnprtMl4DataOosread-writecurrentData Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0.
1.3.6.1.4.1.164.3.2.3.2.19.1.1.9ColumnprtMl4Serviceread-writecurrentLink Service. leasedLine - usual TDM interface. v51 - V5.1 interface. v52Master - V5.2 Link to Local Exchange. v52Slave - a ML that is transferred to the v52Ma…
1.3.6.1.4.1.164.3.2.3.2.19.1.1.10ColumnprtMl4IpAddressread-writecurrentIP Address of the port.
1.3.6.1.4.1.164.3.2.3.2.19.1.1.11ColumnprtMl4IpMaskread-writecurrentIP subnet mask of the port.
1.3.6.1.4.1.164.3.2.3.2.19.1.1.12ColumnprtMl4SignalingModeread-writecurrentRefers to the signaling mode of the port (or framer module). notApplicable(1)- means that no framer is needed for this port (no signaling), or that this object…
1.3.6.1.4.1.164.3.2.3.2.19.1.1.13ColumnprtMl4EchoCancelerread-writecurrentEcho canceler activation.
1.3.6.1.4.1.164.3.2.3.2.19.1.1.14ColumnprtMl4OosErrorSourceread-writecurrentOOS (Out-of-Service) Error Source. This object is applicable for T1 ports only.
1.3.6.1.4.1.164.3.2.3.2.19.1.1.15ColumnprtMl4OosEntryThresholdread-writecurrentThis object defines the number of Errors per Second that determine the minimum unacceptable noise level. This value will be the Entry Threshold to the OOS (Out…
1.3.6.1.4.1.164.3.2.3.2.19.1.1.16ColumnprtMl4OosExitThresholdread-writecurrentThis object defines the number of consecutive Error-Free-Seconds before going from OOS state to Normal state. This value will be the Exit Threshold from the OO…
1.3.6.1.4.1.164.3.2.3.2.19.1.1.17ColumnprtMl4LogicalLinkIdread-writecurrentThis object defines for a V5.2 Master ML the Logical Link Id. Valid values are: 0..256. NA=257.
1.3.6.1.4.1.164.3.2.3.2.19.1.1.18ColumnprtMl4DedicatedTsread-writecurrentA unique number to identify Dedicated TS of the E1 port (V5.2). It is applicable only when prtMl4Service=v52Slave and prtExPh1MlInbandMng selected is dedicated…
1.3.6.1.4.1.164.3.2.3.2.19.1.1.19ColumnprtMl4RemCrcread-writecurrentThis object indicates whether the E1 of the Remote device connected to this E1 port, will have CRC-4 or not.
1.3.6.1.4.1.164.3.2.3.2.19.1.1.20ColumnprtMl4CrossConnectLevelread-writecurrentThis object indicates whether the cross connect is on DS1 or DS0 (time-slots) level. When cross connect level is ds1, Destination Slot is indicated by prtGenCn…
1.3.6.1.4.1.164.3.2.3.2.19.1.1.21ColumnprtMl4PppEchoFailDetectionread-writecurrentThis object indicates whether the PPP Echo is taken into account for its Fail Detection. This object is relevant when Inband Mng between devices is Dedicated T…
1.3.6.1.4.1.164.3.2.3.2.20NodeprtAcmCnfg
1.3.6.1.4.1.164.3.2.3.2.20.1TableprtAcmCnfgTablenot-accessiblecurrentThis is a table for ACM port parameters.
1.3.6.1.4.1.164.3.2.3.2.20.1.1RowprtAcmCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.20.1.1.1ColumnprtAcmCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.20.1.1.2ColumnprtAcmSltIdxread-onlycurrentThis attribute indicates a unique slot position where the module is inserted.
1.3.6.1.4.1.164.3.2.3.2.20.1.1.3ColumnprtAcmPrtIdxread-onlycurrentThis attribute indicates a unique port number.
1.3.6.1.4.1.164.3.2.3.2.20.1.1.4ColumnprtAcmConnectread-writecurrentThis attribute indicates whether the port should be connected or not. Only a connected port can perform activity.
1.3.6.1.4.1.164.3.2.3.2.20.1.1.5ColumnprtAcmActiveStateread-writecurrentThis attribute indicates the Electric Active State of the port.
1.3.6.1.4.1.164.3.2.3.2.20.1.1.6ColumnprtAcmAlrStringread-writecurrentAlarm string selected by user for the Inbound ports. This object is applicable only for the Inbound Ports: ext-5..ext-12. For the Outbound Ports (ext-1..ext-4)…
1.3.6.1.4.1.164.3.2.3.2.21NodeprtE2Cnfg
1.3.6.1.4.1.164.3.2.3.2.21.1TableprtE2CnfgTablenot-accessiblecurrentThis is a table for E2 port parameters.
1.3.6.1.4.1.164.3.2.3.2.21.1.1RowprtE2CnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.21.1.1.1ColumnprtE2CnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.21.1.1.2ColumnprtE2SltIdxread-onlycurrentThis attribute indicates a unique slot position where the module is inserted.
1.3.6.1.4.1.164.3.2.3.2.21.1.1.3ColumnprtE2PrtIdxread-onlycurrentThis attribute indicates a unique port number.
1.3.6.1.4.1.164.3.2.3.2.21.1.1.4ColumnprtE2Connectread-writecurrentThis attribute indicates whether the port should be connected or not. Only a connected port can perform activity.
1.3.6.1.4.1.164.3.2.3.2.21.1.1.5ColumnprtE2MngOnNationalBitread-writecurrentThis attribute indicates whether National Bit will be used for Management or not.
1.3.6.1.4.1.164.3.2.3.2.22NodeprtLanWanCnfg
1.3.6.1.4.1.164.3.2.3.2.22.1TableprtLanWanCnfgTablenot-accessiblecurrentThis is a table for Lan-Wan port parameters.
1.3.6.1.4.1.164.3.2.3.2.22.1.1RowprtLanWanCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.2.3.2.22.1.1.1ColumnprtLanWanCnfgIdxnot-accessiblecurrentThis object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg.
1.3.6.1.4.1.164.3.2.3.2.22.1.1.2ColumnprtLanWanSltIdxnot-accessiblecurrentThis object indicates a unique slot position where the module is inserted.
1.3.6.1.4.1.164.3.2.3.2.22.1.1.3ColumnprtLanWanPrtIdxnot-accessiblecurrentThis object indicates a unique number to identify a port in a specific card. Generally, for MP-210X/2200, the Port Index will be according to the external/inte…
1.3.6.1.4.1.164.3.2.3.2.22.1.1.4ColumnprtLanWanModeread-writecurrentThis object determines the working mode of this port. For FCD155, layer3SubnetSwitch is not applicable
1.3.6.1.4.1.164.3.2.3.2.22.1.1.5ColumnprtLanWanDestIfread-writecurrentThis object determines the Destination Interface for the frames received by this port. - Switching Table = 100 (it means that the destination interface will be…
1.3.6.1.4.1.164.3.2.3.2.22.1.1.6ColumnprtLanWanEgressVlanModeread-writecurrentThis object determines what to do with the VLAN frames that exit via the WAN side of the port. This object is not applicable when prtLanWanMode=l3SubnetSwitch(…
1.3.6.1.4.1.164.3.2.3.2.22.1.1.7ColumnprtLanWanL2Protocolread-writecurrentL2 Protocol. When prtLanWanMode=l3SubnetSwitch(4), the only valid value is ppp(3).
1.3.6.1.4.1.164.3.2.3.2.22.1.1.8ColumnprtLanWanStpPriorityread-writecurrentThe value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
1.3.6.1.4.1.164.3.2.3.2.22.1.1.9ColumnprtLanWanStpCostread-writecurrentThe contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o…
1.3.6.1.4.1.164.3.2.3.2.22.1.1.10ColumnprtLanWanToLanVlanModeread-writecurrentThis object determines what to do with the VLAN frames that come from WAN side of the port and exit towards one of the LAN ports. This object is applicable onl…
1.3.6.1.4.1.164.3.2.3.2.22.1.1.11ColumnprtLanWanVlanIdread-writecurrentThis is the VLAN Id attached to a frame, when the relevant Vlan Mode (prtLanWanEgressVlanMode or prtLanWanToLanVlanMode) is tag or doubleTag. 0=not applicable.
1.3.6.1.4.1.164.3.2.3.2.22.1.1.12ColumnprtLanWanVlanPriorityread-writecurrentThis is the VLAN Priority attached to a frame, when the relevant Vlan Mode (prtLanWanEgressVlanMode or prtLanWanToLanVlanMode) is tag or doubleTag. Valid value…
1.3.6.1.4.1.164.3.2.3.2.22.1.1.13ColumnprtLanWanMturead-writecurrentThe size of the largest packet which can be sent/received on the interface, specified in octets. Valid values change per device. 0=not applicable.
1.3.6.1.4.1.164.3.2.3.2.22.1.1.14ColumnprtLanWanVlanTyperead-writecurrentThis oject indicates type of VLAN this port is assigned to. Port Base Vlan parameters are defined by objects under radBridgePortBaseVlan
1.3.6.1.4.1.164.3.3NodedacsMux
1.3.6.1.4.1.164.3.3.0IdentitydacsMuxEventscurrentThe events for DACS MUX.
1.3.6.1.4.1.164.3.3.0.1NotificationsanityCheckTrapcurrentThis trap is sent after a data base download attempt. It returns the sanity result status and the configuration no.checked.
1.3.6.1.4.1.164.3.3.0.2NotificationdacsMuxAlarmsTrapcurrentThis trap is sent when an alarm occurs.
1.3.6.1.4.1.164.3.3.0.3NotificationmdlConnectTrapcurrentThis trap is sent when a card is removed.
1.3.6.1.4.1.164.3.3.0.4NotificationsysAlrStatusTrapcurrentThis trap is sent upon any change in the value of any of the variables.
1.3.6.1.4.1.164.3.3.0.5NotificationsysStatusChangedTrapcurrentThis trap is sent when Leds status is changed.
1.3.6.1.4.1.164.3.3.0.6NotificationcnfgUpdateTrapcurrentThis trap is sent upon change of the active Configuration DB.
1.3.6.1.4.1.164.3.3.0.7NotificationsysRedundancyStatusTrapcurrentThe trap is sent upon change in Redundancy Status.
1.3.6.1.4.1.164.3.3.0.8NotificationsysRedundancyActiveCardTrapcurrentThe trap is sent upon change of Active Main/CL Card.
1.3.6.1.4.1.164.3.3.0.9NotificationsysRedundancyActivePortTrapcurrentThe trap is sent upon change of Active Port of Redundancy Group.
1.3.6.1.4.1.164.3.3.1NodesystemDacsMux
1.3.6.1.4.1.164.3.3.1.1NodesysSa
1.3.6.1.4.1.164.3.3.1.1.1ScalarsysSaSwchStatusread-onlycurrentThis object indicates the status of the switches on the SA unit. Each switch is represented by a bit. The status is a sum of 2**n, according to the bits. For S…
1.3.6.1.4.1.164.3.3.1.1.2ScalarsysSaSwRevisionread-onlycurrentThis object indicates the Software revision of the system.
1.3.6.1.4.1.164.3.3.1.1.3ScalarsysSaHwVersionread-onlycurrentThis object indicates the Hardware version of the system.
1.3.6.1.4.1.164.3.3.1.1.4ScalarsysSaPortsread-onlycurrentThis object indicates the ports that are present in the system. Each possible port is represented by a bit. The value of this object is a sum of 2**n, n=number…
1.3.6.1.4.1.164.3.3.1.1.5ScalarsysSaReadSwchread-writecurrentThis object indicates wether the configuration will be read from the DIP switches on the SA (stand alone) unit. Each switch is represented by a bit. If the bit…
1.3.6.1.4.1.164.3.3.1.1.6ScalarsysSaBuActivePortread-onlycurrentThis object shows through which port the traffic is flowing (the current Active Port) when the Backup mechanism exists. When No Backup exists in the device, th…
1.3.6.1.4.1.164.3.3.1.2NodesysHub
1.3.6.1.4.1.164.3.3.1.2.1NodesysChas
1.3.6.1.4.1.164.3.3.1.2.1.1ScalarchassTotalNoOfSltread-onlycurrentThis object indicates the number of physical slots in the Hub chassis.
1.3.6.1.4.1.164.3.3.1.2.1.2ScalarchassTotalNoOfIoSltread-onlycurrentThis object indicates the total number of physical IO slots in the chassis, (not all slots must be occupied and active).
1.3.6.1.4.1.164.3.3.1.2.1.3ScalarchassTotalNoOfPsSltread-onlycurrentThis object indicates the number of physical Power Supply slots in the chassis.
1.3.6.1.4.1.164.3.3.1.2.1.4ScalarchassTotalNoOfClSltread-onlycurrentThis object indicates the number of physical Common Logic slots in the chassis.
1.3.6.1.4.1.164.3.3.1.2.1.5ScalarchassTotalNoOfMlSltread-onlycurrentThis object indicates the number of physical Main Link slots in the chassis (Kmux).
1.3.6.1.4.1.164.3.3.1.2.2NodesysDcl
1.3.6.1.4.1.164.3.3.1.2.2.1TablesysDclTablenot-accessiblecurrentAll the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. The write operation into the Table Ob…
1.3.6.1.4.1.164.3.3.1.2.2.1.1RowsysDclEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.1.2.2.1.1.1ColumnsysDclCnfgIdxread-onlycurrentThis object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. This object is identical for all the configurations (1..2…
1.3.6.1.4.1.164.3.3.1.2.2.1.1.2ColumnsysDclRedundancyread-writecurrentDCL redundancy desired state.
1.3.6.1.4.1.164.3.3.1.2.2.1.1.3ColumnsysDclActiveClread-writecurrentActive desired DCL. When 'auto' is selected, the system automatically selects the active DCL.
1.3.6.1.4.1.164.3.3.1.2.2.1.1.4ColumnsysDclFlipDelayread-writecurrentIf one DCL flip occurred and a second one should be performed, the time from the previous flip is checked. If the time is shorter than the delay specified here…
1.3.6.1.4.1.164.3.3.1.2.2.1.1.5ColumnsysDclFlipUponStnClkread-writecurrentThis object allows user to decide (yes/no) if Agent should Flip from one DCL card to another, when there is Station Clock Fail in the Online DCL card.
1.3.6.1.4.1.164.3.3.1.2.2.1.1.6ColumnsysDclChFailThresholdread-writecurrentThis object indicates the number of failed channels that will trigger the redundancy procedure.
1.3.6.1.4.1.164.3.3.1.2.2.1.1.7ColumnsysDclChPriorityread-writecurrentThis object indicates the Priority for all the channels in the Main Access (Common Logic) card. Each channel is represented by 1 bit. The order of the bits in …
1.3.6.1.4.1.164.3.3.1.2.2.1.1.8ColumnsysDclConfigDownloadSrcread-writecurrentIn case of mismatch between the 2 CL card's configuration, the user can decide which card has the suitable configuration. The selected configuration will be do…
1.3.6.1.4.1.164.3.3.1.2.2.1.1.9ColumnsysDclSwDownloadSrcread-writecurrentIn case of mismatch between the 2 CL card's software, the user can decide which card has the suitable SW. The selected SW will be downloaded from card A to car…
1.3.6.1.4.1.164.3.3.1.2.2.1.1.10ColumnsysDclRedundancyStatusread-onlycurrentBit map representing current Redundancy Status. bit 0 - Indicates mismatch between the 2 CL cards' Configuration bit 1 - Indicates mismatch between the 2 CL ca…
1.3.6.1.4.1.164.3.3.1.2.2.2ScalarsysDclOnlineread-onlycurrentThe active Dcl card of the agent.
1.3.6.1.4.1.164.3.3.1.2.2.3TablesysDclCopyDbTablenot-accessiblecurrentThis table enables to copy a cofiguration from the Offline Dcl to the Online Dcl.
1.3.6.1.4.1.164.3.3.1.2.2.3.1RowsysDclCopyDbEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.1.2.2.3.1.1ColumnsysDclCopyDbIdxread-onlycurrentThis object indicates the Idx of the Cnfg(1..255) being accessed.
1.3.6.1.4.1.164.3.3.1.2.2.3.1.2ColumnsysDclCopyDbCmdread-writecurrentWhen this command is sent to the agent, on(3), the Database specified (Db Idx), will be copied from the Offline Dcl to the Online Dcl. Afterwards the value of …
1.3.6.1.4.1.164.3.3.1.2.2.4ScalarsysDclFlipCmdread-writecurrentWhen the 'flip(3)' command is received by Agent, it will flip (switch) between Offline Dcl and Online Dcl cards. Afterwards the value of this object will autom…
1.3.6.1.4.1.164.3.3.1.3NodesysStatus
1.3.6.1.4.1.164.3.3.1.3.1ScalarsysSDateFormatread-writecurrentThis object indicates the date and time format used for the sysSDateAndTimeCmd and for the alarm buffer report.
1.3.6.1.4.1.164.3.3.1.3.2ScalarsysSDateCmdread-writecurrentThis object indicates the current date as it is known by the agent using its own real-time clock. The format would be as specified by the sysSDateFormat. This …
1.3.6.1.4.1.164.3.3.1.3.3ScalarsysSTimeCmdread-writecurrentThis object indicates the current time as it is known by the agent using its own real-time clock. This parameter can be set for time synchronization between th…
1.3.6.1.4.1.164.3.3.1.3.4ScalarsysSActiveCnfgread-onlycurrentThis object specifies the configuration number, that is currently active and running.
1.3.6.1.4.1.164.3.3.1.3.5ScalarsysSEditCnfgread-onlycurrentThis object indicates the unique configuration number that is currently loaded into the tmp working space for manipulation and update operations. Value of 255 …
1.3.6.1.4.1.164.3.3.1.3.6ScalarsysSEditByread-onlycurrentThis entry indicates which MMI application is working on the edited config. The editing phase starts at the first modify operation and ends after a load operat…
1.3.6.1.4.1.164.3.3.1.3.7ScalarsysSClkSrcread-onlycurrentThis entry indicates the source of the system clock.
1.3.6.1.4.1.164.3.3.1.3.8ScalarsysSAlrStatusread-onlycurrentIndicates the current alarm state only for system level. This object will be : - critical(7): when there is at least one active (ON) critical alarm . - major (…
1.3.6.1.4.1.164.3.3.1.3.9ScalarsysSAlrStatusAllread-onlycurrentIndicates the current alarm state including all levels: system, card, port. - critical(7): when there is at least one active (ON) critical alarm . - major (3):…
1.3.6.1.4.1.164.3.3.1.3.10ScalarsysSTestStatusread-onlycurrentIndicates the current test status (for all levels: system, card, port). This attribute will be set to: - on(3): when there is at least one test in progress on …
1.3.6.1.4.1.164.3.3.1.3.11ScalarsysSSanityCheckStatusread-onlycurrentUpon completion of the Sanity Check process on the TmpCnfg this object will be set to: - fail(2): when there is at least one error (which is not just a warning…
1.3.6.1.4.1.164.3.3.1.3.12ScalarsysSNoOfSanityCheckErrread-onlycurrentThis object indicates the number of errors/warnings discovered by the last Sanity Check process.
1.3.6.1.4.1.164.3.3.1.3.13TablesysSErrListTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.1.3.13.1RowsysSErrListEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.1.3.13.1.1ColumnsysSErrTyperead-onlycurrentThe errors are recorded in the agent, in two separate lists, according to their type: error or warning.
1.3.6.1.4.1.164.3.3.1.3.13.1.2ColumnsysSErrIdxread-onlycurrentUnique index number to identify an entry in the error or warning list . The maximum value cannot exceed the value of 'sysSNoOfSanityCheckErr' (actually, the su…
1.3.6.1.4.1.164.3.3.1.3.13.1.3ColumnsysSErrDescriptionread-onlycurrentThis object is a full text description of the sanity check error including error code, IO slot and port numbers related to the code .
1.3.6.1.4.1.164.3.3.1.3.14ScalarsysSMaxNoOfCnfgread-onlycurrentMaximum number of configurations that can be defined and stored in the DACS agent. If the DACS agent has a large capacity, the maximum will be limited to 254.
1.3.6.1.4.1.164.3.3.1.3.15ScalarsysSSelfTestResultread-onlycurrentThe test is performed by the active Common Logic card. The result will be a sum of 2**n according to the following bit convention: For DXC: bit 0 Database 1 Ch…
1.3.6.1.4.1.164.3.3.1.3.16ScalarsysSRelayStateread-onlycurrentIndicates the current state of the alarm relay. notApplicable - for agents that do not support this object.
1.3.6.1.4.1.164.3.3.1.3.17ScalarsysSInvertedAlrread-onlycurrentIndicates if there is any Inverted alarm at any level of the system (sys, card, port). notApplicable - for agents that do not support this object.
1.3.6.1.4.1.164.3.3.1.3.18TablesysSRdnFlipTablenot-accessiblecurrentThis table includes all the Flip events due to I/O Redundancy since last Clear command of this table.
1.3.6.1.4.1.164.3.3.1.3.18.1RowsysSRdnFlipEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.1.3.18.1.1ColumnsysSRdnFlipIdxread-onlycurrentUnique index number to identify an entry in the Redundancy Flip list.
1.3.6.1.4.1.164.3.3.1.3.18.1.2ColumnsysSRdnFlipSlotread-onlycurrentThe slot number from which Flip was performed.
1.3.6.1.4.1.164.3.3.1.3.18.1.3ColumnsysSRdnFlipPortread-onlycurrentThe port number from which Flip was performed. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last …
1.3.6.1.4.1.164.3.3.1.3.18.1.4ColumnsysSRdnFlipCauseread-onlycurrentThe last cause that caused the Flip from the Slot (Port) of sysSRdnSlot, sysSRdnPort.
1.3.6.1.4.1.164.3.3.1.3.18.1.5ColumnsysSRdnFlipDateread-onlycurrentFlip event Date. The format will be the one selected by user for sysSDateFormat.
1.3.6.1.4.1.164.3.3.1.3.18.1.6ColumnsysSRdnFlipTimeread-onlycurrentFlip event Time. The format will be hh:mm:ss.
1.3.6.1.4.1.164.3.3.1.3.19ScalarsysSRdnFlipTableClearCmdread-writecurrentThis command, when Set to 'on', clears the Redundancy Flip table (sysSRdnFlipTable). After clear is performed, the agent will turn the value to 'off' automatic…
1.3.6.1.4.1.164.3.3.1.3.20ScalarsysSRdnFlipCmdread-writecurrentThis object enables the user to send a command to the Agent, to Flip from a current Online IO card to its Redundant card. The value sent will be an Object Iden…
1.3.6.1.4.1.164.3.3.1.3.21TablesysSBusTablenot-accessiblecurrentThis table includes data and status about the internal DXC BUS.
1.3.6.1.4.1.164.3.3.1.3.21.1RowsysSBusEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.1.3.21.1.1ColumnsysSBusPortIdxread-onlycurrentThe DXC BUS port number: - first two digits will be: (IO slot number+10) - last one/two digits will be the Bus port number, in odd numbers: port1 = 1 port2 = 3…
1.3.6.1.4.1.164.3.3.1.3.21.1.2ColumnsysSBusStatusread-onlycurrentThe Status of sysSBusPortIdx. free - not used physical - captured by the port of the card physically installed virtual - captured virtually by another port. Ex…
1.3.6.1.4.1.164.3.3.1.3.21.1.3ColumnsysSBusCapturePortread-onlycurrentThe Port that Captured the sysSBusPortIdx. - if sysSBusStatus=free, the value will be 'none'=0 - else, if sysSBusStatus=fixed, the value will be: sysSBusPortId…
1.3.6.1.4.1.164.3.3.1.3.21.1.4ColumnsysSBusUtilizationread-onlycurrentUtilization of sysSBusPortIdx resources, in percent [%].
1.3.6.1.4.1.164.3.3.1.3.22TablesysSRdnCmdTablenot-accessiblecurrentThis table includes commands used for IO Redundancy.
1.3.6.1.4.1.164.3.3.1.3.22.1RowsysSRdnCmdEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.1.3.22.1.1ColumnsysSRdnEnforcedChannelread-writecurrentThis is a command to override all switching considerations and enforce use of primary/ secondary connection only. noEnforcement - cancels the state of override…
1.3.6.1.4.1.164.3.3.1.3.22.1.2ColumnsysSRdnLockFlipread-writecurrentThis is a command to lock the Redundancy flip for this redundancy couple. Default = off(2).
1.3.6.1.4.1.164.3.3.1.3.22.1.3ColumnsysSRdnManualFlipread-writecurrentThis is a command to move to manual Redundancy flip mode for this redundancy couple. Default = off(2).
1.3.6.1.4.1.164.3.3.1.3.23ScalarsysSAlrAttrIndicationread-onlycurrentThis object indicates the status of the Alarm Attributes for the whole device. It is a sum of 2**(Bit-1). A Bit will be '1', when any alarm in the device is Fi…
1.3.6.1.4.1.164.3.3.1.4NodesysCurrentAlr
1.3.6.1.4.1.164.3.3.1.4.1TablesysSAlrTablenot-accessiblecurrentList of system level current existing alarms .
1.3.6.1.4.1.164.3.3.1.4.1.1RowsysSAlrEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.1.4.1.1.1ColumnsysSAlrIdxread-onlycurrentAn index number of the current system alarms.
1.3.6.1.4.1.164.3.3.1.4.1.1.2ColumnsysSAlrCoderead-onlycurrentThis object indicates a code related to a specific alarm description. The list of codes and their related descriptions will be sent to NMS request (for display…
1.3.6.1.4.1.164.3.3.1.4.1.1.3ColumnsysSAlrStateread-onlycurrentThis object indicates the alarm Severity.
1.3.6.1.4.1.164.3.3.1.4.1.1.4ColumnsysSAlarmMaskread-onlycurrentAlarm Mask is : on/off.
1.3.6.1.4.1.164.3.3.1.4.1.1.5ColumnsysSAlarmInvertread-onlycurrentAlarm Invert is : on/off.
1.3.6.1.4.1.164.3.3.1.4.1.1.6ColumnsysSAlarmOnOffread-onlycurrentAlarm state is : on/off.
1.3.6.1.4.1.164.3.3.1.4.1.1.7ColumnsysSAlarmCounterread-onlycurrentA counter - how many times the alarm occured (ON) since last clear operation or since last Reset.
1.3.6.1.4.1.164.3.3.1.4.2ScalarsysSAlrClearCmdread-writecurrentSetting this attribute to ON, will enforce a clear operation on the system level alarms . Upon completion, the value will automatically change to off(2).
1.3.6.1.4.1.164.3.3.1.4.3ScalarsysSAlrClearAllCmdread-writecurrentSetting this attribute to ON, will enforce a clear operation on all levels alarms . Upon completion, the value will automatically change to off(2).
1.3.6.1.4.1.164.3.3.1.4.4ScalarsysSAlrMaskAllread-writecurrenton(3) - will cause masking of all the system level alarms. These alarms will not be sent to NMS and will not be taken into account for Alarms Status. off(2) - …
1.3.6.1.4.1.164.3.3.1.4.5ScalarsysSAlrMaskread-writecurrentThis object is a mask that indicates which system level alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor tak…
1.3.6.1.4.1.164.3.3.1.4.6ScalarsysSAlrDataUpdateCmdread-writecurrenton(3) - will cause Update of the Alarms Severity, Attributes and Report tables. off(2) - Upon completion, the value will automatically change to off(2).
1.3.6.1.4.1.164.3.3.1.5NodesysBufferAlr
1.3.6.1.4.1.164.3.3.1.5.1TablesysBufferAlrTablenot-accessiblecurrentList of current existing alarms (of all levels).
1.3.6.1.4.1.164.3.3.1.5.1.1RowsysBufferAlrEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.1.5.1.1.1ColumnsysBufferAlrIdxread-onlycurrentAn index number of the current alarms.
1.3.6.1.4.1.164.3.3.1.5.1.1.2ColumnsysBufferAlrCoderead-onlycurrentThis object indicates a code related to a specific alarm description. The list of codes and thir related descriptions will be known by the NMS (for display pur…
1.3.6.1.4.1.164.3.3.1.5.1.1.3ColumnsysBufferAlrStateread-onlycurrentThis object indicates the alarm type. minor/major/warning/critical - indicates appearance of the problem and the type. event - indicates occurence of an event.…
1.3.6.1.4.1.164.3.3.1.5.1.1.4ColumnsysBufferAlrSlotread-onlycurrentThe slot number this alarm refers to. When the alarm refers to a system function OR the DACS agent is a stand-alone unit, the value will be 'notApplicable(255)…
1.3.6.1.4.1.164.3.3.1.5.1.1.5ColumnsysBufferAlrPortread-onlycurrentThe port number this alarm refers to. If the port number is irrelevant to this alarm (if it is a system/card level alarm) the value will be 9999.
1.3.6.1.4.1.164.3.3.1.5.1.1.6ColumnsysBufferAlrDateread-onlycurrentThe date when the alarm occured. The format will be according to sysSDateFormat.
1.3.6.1.4.1.164.3.3.1.5.1.1.7ColumnsysBufferAlrTimeread-onlycurrentThe time when the alarm occured.
1.3.6.1.4.1.164.3.3.1.5.1.1.8ColumnsysBufferAlrUpTimeread-onlycurrentThe time when the alarm occured. This parameter holds the sysUpTime value when the alarm occured.
1.3.6.1.4.1.164.3.3.1.5.1.1.9ColumnsysBufferAlrInforead-onlycurrentThis parameter includes information about the alarm (additional to the Description).
1.3.6.1.4.1.164.3.3.1.5.2ScalarsysBufferAlrClearCmdread-writecurrentSetting this attribute to ON, will enforce a clear operation on the Alarms Buffer. Upon completion, the value will automatically change to off(2).
1.3.6.1.4.1.164.3.3.1.6NodesysConfig
1.3.6.1.4.1.164.3.3.1.6.1TablesysCClkSrcTablenot-accessiblecurrentAll the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. For devices with more than one config…
1.3.6.1.4.1.164.3.3.1.6.1.1RowsysCClkSrcEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.1.6.1.1.1ColumnsysCClkCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg being accessed ; Idx of 255 relates to the TmpCnfg. It can be also a combination of the configuration number and t…
1.3.6.1.4.1.164.3.3.1.6.1.1.2ColumnsysCClkSrcIdxread-onlycurrentAn index in the table. There are only two entries in the table. master - refers Master clock parameters fallback - refers Fallback clock parameters
1.3.6.1.4.1.164.3.3.1.6.1.1.3ColumnsysCClkSrcModeread-writecurrentThis entry indicates the source the nodal timing is locked to. none - is an invalid option for Master clock. internal - is an invalid option for Fallback clock…
1.3.6.1.4.1.164.3.3.1.6.1.1.4ColumnsysCClkSrcPrtread-writecurrentThis entry is valid only when working in rxClk mode (for IPmux1000 this entry will be valid whe working in LBT mode). For ACE2002 in case of invalid entry the …
1.3.6.1.4.1.164.3.3.1.6.1.1.5ColumnsysCClkStationFreqread-writecurrentThis entry indicates the frequency of the station clock when the source is 'station'. The value will be applicable only when the sysCClkSrcMode is 'station'.
1.3.6.1.4.1.164.3.3.1.6.1.1.6ColumnsysCClkRevertiveTimeoutread-writecurrentThe time in seconds in which the system will monitor the higher level clock source, before decision to revert to that clock. In case the time is zero, revertiv…
1.3.6.1.4.1.164.3.3.1.6.1.1.7ColumnsysCClkStationIfread-writecurrentThis entry indicates the electrical interface connected to the station clock, when the source is 'station'. The value will be applicable only when the sysCClkS…
1.3.6.1.4.1.164.3.3.1.6.1.1.8ColumnsysCClkStationCableModeread-writecurrentThis parameter indicates whether both Station clocks get their clock from the same source (Y Cable)or each one get its clock independently. The value will be a…
1.3.6.1.4.1.164.3.3.1.6.1.1.9ColumnsysCClkStationOutStateread-writecurrentThis parameter indicates whether station clock can send its clock to another device. The value will be applicable only when the sysCClkSrcMode is 'station'.
1.3.6.1.4.1.164.3.3.1.6.1.1.10ColumnsysCClkSsmBasedread-writecurrentThis parameter indicates whether clock source will be selected based on receive clock quality, indicated in S1 byte inside SONET/SDH overhead, (encoded as SSM …
1.3.6.1.4.1.164.3.3.1.6.1.1.11ColumnsysCClkSSubsystemSlotread-writecurrentThis entry indicates the Slot from which the S Subsytem Source will be taken. The value will be applicable only when the sysCClkSrcMode is 'sSubsystem'.
1.3.6.1.4.1.164.3.3.1.6.1.1.12ColumnsysCClkRecoveredIDread-writecurrentThis entry indicates the Recovered Clock ID. The value will be applicable only when sysCClkSrcMode is 'recovered'.
1.3.6.1.4.1.164.3.3.1.6.2TablesysCnfgTablenot-accessiblecurrentAll the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. The write operation into the Table Ob…
1.3.6.1.4.1.164.3.3.1.6.2.1RowsysCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.1.6.2.1.1ColumnsysCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. For Gmux2000 the range limitation (1..255) was discard…
1.3.6.1.4.1.164.3.3.1.6.2.1.2ColumnsysCMatrixModeread-writecurrentIndicates the TS Matrix Mode: bidirectional - TS Assignment Matrix is symmetric. unidirectional - TS Assignment Matrix can be asymmetric. notApplicable - for a…
1.3.6.1.4.1.164.3.3.1.6.2.1.3ColumnsysCIsdnFormatread-writecurrentISDN format. This parameter controls the operation mode of the ISDN ports. te - ISDN timing is derived from the signal received from the equipment it is connec…
1.3.6.1.4.1.164.3.3.1.6.2.1.4ColumnsysCRoutingOnEthread-writecurrentMng Routing Protocol on the online CL Ethernet port, or on device Ethernet port dedicated for mangement.
1.3.6.1.4.1.164.3.3.1.6.2.1.5ColumnsysCAutoConfigEnableread-writecurrentThis object enables user to enable/disable activating the Auto Configuration. When Auto Configuration is activated, the device learns its configuration Automat…
1.3.6.1.4.1.164.3.3.1.6.2.1.6ColumnsysCIntTsAllocModeread-writecurrentThis object enables user to select the mode of Internal TS Allocation. static - user has to select for each Dynamic card port, the Maximum TSs expected to be c…
1.3.6.1.4.1.164.3.3.1.6.2.1.7ColumnsysCBuPrimaryPortread-writecurrentThis object enables the user to configure a Backup mechanism. If a backup mechanism exists, it is possible to configure the primary port. The traffic will flow…
1.3.6.1.4.1.164.3.3.1.6.2.1.8ColumnsysCEnableLanOverTdmread-writecurrentThis object enables/disables transferring traffic from the LAN port to the TDM port. It is possible to enable only part of the traffic on the TDM port for secu…
1.3.6.1.4.1.164.3.3.1.6.2.1.9ColumnsysCSs7FisuSuppressionread-writecurrentSS7 Suppresion is used for SS7 Spoofing. The SS7 spoofing terminates the keep alive messages from the local VMUX without sending them over the network, thus im…
1.3.6.1.4.1.164.3.3.1.6.2.1.10ColumnsysCBuRecModeread-writecurrentRecovery Mode. This object determines if after recovery of the Primary Link (used in Vmux) it will become on-line again or not: auto - automatic. In this case,…
1.3.6.1.4.1.164.3.3.1.6.3TablesysCRdnTablenot-accessiblecurrentConfiguration of all Redundant I/O cards and ports. The write operation into the table objects is valid only for the TmpCnfg. A Slot/Port that have no Redundan…
1.3.6.1.4.1.164.3.3.1.6.3.1RowsysCRdnEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.1.6.3.1.1ColumnsysCRdnCnfgIdxread-onlycurrentThis object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.3.1.6.3.1.2ColumnsysCRdnPrimeSlotread-onlycurrentThe slot number of the Primary card of Redundancy. The Primary card should be the card that user wishes to be the online card (usually the more important one).…
1.3.6.1.4.1.164.3.3.1.6.3.1.3ColumnsysCRdnPrimePortread-onlycurrentThe port number. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the por…
1.3.6.1.4.1.164.3.3.1.6.3.1.4ColumnsysCRdnSecSlotread-createcurrentThe slot number of the Secondary card of Redundancy matching the Primary slot.
1.3.6.1.4.1.164.3.3.1.6.3.1.5ColumnsysCRdnSecPortread-createcurrentThe port number. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the por…
1.3.6.1.4.1.164.3.3.1.6.3.1.6ColumnsysCRdnModeread-createcurrentRedundancy Mode. DXC supports: yCable(3), singleSlotProtection(6) and dualCableParallelTx(4) MP supports: yCable(3), dualCableParallelTx(4), onePlusOne(7) and …
1.3.6.1.4.1.164.3.3.1.6.3.1.7ColumnsysCRdnRecModeread-createcurrentRecovery Mode. This object determines if after recovery of the failed Primary card/port it will become on-line again or not: auto - automatic . In this case, t…
1.3.6.1.4.1.164.3.3.1.6.3.1.8ColumnsysCRdnRecTimeread-createcurrentRedundancy Recovery Time (sec). After switching to the current online card, the next switch can be performed only after a minimum time, indicated by this objec…
1.3.6.1.4.1.164.3.3.1.6.3.1.9ColumnsysCRdnHwSwFlipread-createcurrentHW or SW decision for Redundancy Flip. This object is applicable only for sysCRdnMode=singleSlotProtection. HW - decision is by I/O card SW - decision is by CL…
1.3.6.1.4.1.164.3.3.1.6.3.1.10ColumnsysCRdnRowStatusread-createcurrentThis parameter allows NMS to create/delete entries of this table. The possible supported RowStatus values are active (1) and destroy (6). For Vmux-2100 the sup…
1.3.6.1.4.1.164.3.3.1.6.3.1.11ColumnsysCRdnOnlineread-onlycurrentStatus - who is the Online (current) Redundancy Slot/Port. This object shows only the Online Slot/Port regarding the Redundancy. mdlSActivity or prtGenActiveSt…
1.3.6.1.4.1.164.3.3.1.6.3.1.12ColumnsysCRdnSwitchingModeread-createcurrentThis object defines which Self Healing Ring (SHR) SDH ring is used: Uni Directional or BiDirectional. The type of the ring is defined according to the directio…
1.3.6.1.4.1.164.3.3.1.6.3.1.13ColumnsysCRdnFlipUponEventread-createcurrentThis object allows user to define if Flip to the other port will be performed (or not), for certain possible events. Each event is represented by a bit. The va…
1.3.6.1.4.1.164.3.3.1.6.3.1.14ColumnsysCRdnLosOrLofTimeread-createcurrentThis parameter determines how much time to wait before switching, after LOF or LOS are detected on the TDM Line. For Ipmux time is counted in msec.
1.3.6.1.4.1.164.3.3.1.6.3.1.15ColumnsysCRdnEventsTimeWindowread-createcurrentThis parameter determines the time window in which to count events to trigger protection switching. For Ipmux time is counted in seconds.
1.3.6.1.4.1.164.3.3.1.6.3.1.16ColumnsysCRdnSequenceNumberThresholdread-createcurrentThis parameter determines the number of Sequence Number errors that should occur in the time window in order to cause switching.
1.3.6.1.4.1.164.3.3.1.6.3.1.17ColumnsysCRdnBufferErrorsThresholdread-createcurrentThis parameter determines the number of Buffer undeflow/ overflow events occured in the time window that cause switching.
1.3.6.1.4.1.164.3.3.1.6.3.1.18ColumnsysCRdnBuffUnderrunTimeread-createcurrentThis parameter determines how much time to wait before switching, after jitter buffer underrun. Switching occurs if no frame arrives within that time. For Ipmu…
1.3.6.1.4.1.164.3.3.1.6.3.1.19ColumnsysCRdnPrimePriorityread-createcurrentThe Primary port priority. In ETX2xx/2xxA: When selecting sysCRdnMode = manual (10), this parameter determines the forced active port: low - means that the sec…
1.3.6.1.4.1.164.3.3.1.6.3.1.20ColumnsysCRdnSecPriorityread-createcurrentThe Secondary port priority.
1.3.6.1.4.1.164.3.3.1.6.3.1.21ColumnsysCRdnWTRread-createcurrentRedundancy Wait to Restore (sec). Valid Values: 0..999, 65535. 65535=NA. When the value <> 65535, the value of sysCRdnRecTime must be 65535.
1.3.6.1.4.1.164.3.3.1.6.3.1.22ColumnsysCRdnNameread-createcurrentA textual name for the redundancy group.
1.3.6.1.4.1.164.3.3.1.6.3.1.23ColumnsysCRdnTxDownDurationUponFlipread-createcurrentThis object defines the duration (in seconds) the active port transmission is shut down after flip occurs. The transmission is shut down and then opened again …
1.3.6.1.4.1.164.3.3.1.7NodesysDbase
1.3.6.1.4.1.164.3.3.1.7.1ScalarsysDbaseSanityCheckCmdread-writecurrentSetting this attribute to on(3) will initiate the process of Sanity check on the TmpCnfg. Upon completion, the value will automatically change to off(2).
1.3.6.1.4.1.164.3.3.1.7.2ScalarsysDbaseDownloadCnfgIdxCmdread-writecurrentThis attribute specifies the Id of the target RealCnfg to which the TmpCnfg should be transferred. Upon set command, the DACS agent will initiate the Sanity-Ch…
1.3.6.1.4.1.164.3.3.1.7.3ScalarsysDbaseUploadCnfgIdxCmdread-writecurrentThis attribute specifies the Id of the source Cnfg to be loaded into the TmpCnfg. Upon set operation the actual transfer will be initiated. The operation is va…
1.3.6.1.4.1.164.3.3.1.7.4TablesysDbaseFlipTablenot-accessiblecurrentDbase Flip time and activation for every configuration.
1.3.6.1.4.1.164.3.3.1.7.4.1RowsysDbaseFlipEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.1.7.4.1.1ColumnsysDbaseFlipIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg being the target Configuration.
1.3.6.1.4.1.164.3.3.1.7.4.1.2ColumnsysDbaseFlipTimeread-writecurrentThis attribute indicates the time (HH:MM) when this data base will start being used by the Tmp config.
1.3.6.1.4.1.164.3.3.1.7.4.1.3ColumnsysDbaseFlipActivationread-writecurrentThis attribute indicates if the Dbase flip will be activated at the time specified for this configuration (enable) or not (disable). No more than one flip shou…
1.3.6.1.4.1.164.3.3.2NodemdlDacsMux
1.3.6.1.4.1.164.3.3.2.1NodemdlGen
1.3.6.1.4.1.164.3.3.2.1.1TablemdlSTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.2.1.1.1RowmdlSEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.2.1.1.1.1ColumnmdlSSltIdxread-onlycurrentA unique number to identify a slot position in the DACS. The Kilomux should use enumerated values starting with kmx. For IPmux100 use values 1-13, 20.
1.3.6.1.4.1.164.3.3.2.1.1.1.2ColumnmdlSCardTyperead-onlycurrentThis attribute indicates the type of the card installed in the specific slot position. Only PS's are possible in the PS slots. Only CL's are possible in the CL…
1.3.6.1.4.1.164.3.3.2.1.1.1.3ColumnmdlSHwVerread-onlycurrentThis attribute indicates the Hardware version of the card installed in the specific slot position.
1.3.6.1.4.1.164.3.3.2.1.1.1.4ColumnmdlSSwVerread-onlycurrentThis attribute indicates the Software version of the card installed in the specific slot position.
1.3.6.1.4.1.164.3.3.2.1.1.1.5ColumnmdlSAlarmStatusread-onlycurrentIndicates the current alarm state only for card level. This object will be set to: - critical(7): when there is at least one active (ON) critical alarm . - maj…
1.3.6.1.4.1.164.3.3.2.1.1.1.6ColumnmdlSAlarmStatusAllread-onlycurrentIndicates the current card alarm state including the lower level: card, port. This object will be set to: - critical(7): when there is at least one active (ON)…
1.3.6.1.4.1.164.3.3.2.1.1.1.7ColumnmdlSTestStatusread-onlycurrentThis attribute will be on(3) when there is at least one test running on a port of the module; otherwise the value will be off(2).
1.3.6.1.4.1.164.3.3.2.1.1.1.8ColumnmdlSHwStatusread-onlycurrentThis attribute will be fail(2) when a HW FAIL exists on this module (discovered by periodic self test); otherwise the value will be ok(3).
1.3.6.1.4.1.164.3.3.2.1.1.1.9ColumnmdlSActivityread-onlycurrentnotApplicable - when the slot is empty (no module) offline(1) - when the module is not active (redundant) online (2) - when the module is active .
1.3.6.1.4.1.164.3.3.2.1.1.1.10ColumnmdlSAlrClearCmdread-writecurrentSetting this attribute to ON, will enforce a clear operation on the card level alarms . Upon completion, the value will automatically change to off(2).
1.3.6.1.4.1.164.3.3.2.1.1.1.11ColumnmdlSAlrClearAllCmdread-writecurrentSetting this attribute to ON, will enforce a clear operation on card and port level alarms . Upon completion, the value will automatically change to off(2).
1.3.6.1.4.1.164.3.3.2.1.1.1.12ColumnmdlSAlrMaskAllread-writecurrenton(3) - will cause masking of all the card level alarms. These alarms will not be sent to NMS and will not be taken into account for Alarms Status. off(2) - wi…
1.3.6.1.4.1.164.3.3.2.1.1.1.13ColumnmdlSCmdread-writecurrentGeneral object for any special command at card level. 0=NotApplicable, for cards that don't support this object. For KML.10(ISDN) card of KM-2100, the object w…
1.3.6.1.4.1.164.3.3.2.1.1.1.14ColumnmdlSResetread-writecurrentReset action to be performed on the module.
1.3.6.1.4.1.164.3.3.2.1.1.1.15ColumnmdlSRebuildFrameread-writecurrentApplicable only for KiloMux Main Link cards only. '2' = off, this will be always the Get value. '3' = on, this is the Set command used to Rebuild the Frame. Up…
1.3.6.1.4.1.164.3.3.2.1.1.1.16ColumnmdlSBackupSwVerread-onlycurrentThis attribute indicates the Backup Software version of the card installed in the specific slot position.
1.3.6.1.4.1.164.3.3.2.1.1.1.17ColumnmdlSSecondaryBackupSwVerread-onlycurrentThis attribute indicates the Secondary Backup Software version of the card installed in the specific slot position.
1.3.6.1.4.1.164.3.3.2.1.1.1.18ColumnmdlSPiggybackVerread-onlycurrentThis attribute indicates the Piggyback version of the card installed in the specific slot position.
1.3.6.1.4.1.164.3.3.2.1.2TablemdlCTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.2.1.2.1RowmdlCEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.2.1.2.1.1ColumnmdlCConfigIdxread-onlycurrentThis object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch).
1.3.6.1.4.1.164.3.3.2.1.2.1.2ColumnmdlCSlotIdxread-onlycurrentThis object indicates a unique number of the slot position in which the module is inserted. The Kilomux should use enumerated values starting with kmx.
1.3.6.1.4.1.164.3.3.2.1.2.1.3ColumnmdlCProgCardTyperead-writecurrentThis object indicates the card type assigned to the specific slot in the common configuration. This object is identical for all the configurations (1..255). On…
1.3.6.1.4.1.164.3.3.2.1.2.1.4ColumnmdlCNoOfExtPrtread-onlycurrentNumber of external ports in the programmed module of the specific slot position
1.3.6.1.4.1.164.3.3.2.1.2.1.5ColumnmdlCNoOfIntPrtread-onlycurrentNumber of internal ports in the programmed module of the specific slot position.
1.3.6.1.4.1.164.3.3.2.1.2.1.6ColumnmdlCParamread-writecurrentGeneral configuration object at card level (per configuration). NotApplicable=0, for cards that don't support this object. For D8U and D16U cards of DXC, the o…
1.3.6.1.4.1.164.3.3.2.1.3NodemdlAlr
1.3.6.1.4.1.164.3.3.2.1.3.1TablemdlAlrTablenot-accessiblecurrentThe list of card alarms.
1.3.6.1.4.1.164.3.3.2.1.3.1.1RowmdlAlrEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.2.1.3.1.1.1ColumnmdlAlrIdxread-onlycurrentA unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecuti…
1.3.6.1.4.1.164.3.3.2.1.3.1.1.2ColumnmdlAlrSltIdxread-onlycurrentThis attribute indicates the desired slot position. The Kilomux should use enumerated values starting with kmx.
1.3.6.1.4.1.164.3.3.2.1.3.1.1.3ColumnmdlAlrCoderead-onlycurrentThis object indicates a code related to a specific alarm description. The list of codes and their related descriptions will be sent to NMS request (for display…
1.3.6.1.4.1.164.3.3.2.1.3.1.1.4ColumnmdlAlrStateread-onlycurrentThis object indicates the card alarm severity.
1.3.6.1.4.1.164.3.3.2.1.3.1.1.5ColumnmdlAlarmMaskread-onlycurrentAlarm Mask is : on/off.
1.3.6.1.4.1.164.3.3.2.1.3.1.1.6ColumnmdlAlarmInvertread-onlycurrentAlarm Invert is : on/off.
1.3.6.1.4.1.164.3.3.2.1.3.1.1.7ColumnmdlAlarmOnOffread-onlycurrentAlarm state is : on/off.
1.3.6.1.4.1.164.3.3.2.1.3.1.1.8ColumnmdlAlarmCounterread-onlycurrentA counter - how many times the alarm occured (ON) since last clear operation or since last Reset.
1.3.6.1.4.1.164.3.3.2.1.3.2TablemdlAlrMaskTablenot-accessiblecurrentThe list of card masked alarms.
1.3.6.1.4.1.164.3.3.2.1.3.2.1RowmdlAlrMaskEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.2.1.3.2.1.1ColumnmdlAlrMaskSltIdxread-onlycurrentThis attribute indicates the desired slot position. The Kilomux should use enumerated values starting with kmx.
1.3.6.1.4.1.164.3.3.2.1.3.2.1.2ColumnmdlAlrMaskread-writecurrentThis object is a mask that indicates which card level alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor taken…
1.3.6.1.4.1.164.3.3.2.2NodemdlCl
1.3.6.1.4.1.164.3.3.2.2.1TablemdlClTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.2.2.1.1RowmdlClEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.2.2.1.1.1ColumnmdlClIdxread-onlycurrentThis object indicates the Cl slot referred.
1.3.6.1.4.1.164.3.3.2.2.1.1.2ColumnmdlClSwchStatusread-onlycurrentThis object indicates the status of the switches on the referred DCL card. Each switch is represented by a bit. The status is a sum of 2**n, according to the b…
1.3.6.1.4.1.164.3.3.2.2.1.1.3ColumnmdlClLastFlipDateread-onlycurrentDate when last flip occured. The format would be as specified by the sysSDateFormat.
1.3.6.1.4.1.164.3.3.2.2.1.1.4ColumnmdlClLastFlipTimeread-onlycurrentTime when last flip occured.
1.3.6.1.4.1.164.3.3.2.2.1.1.5ColumnmdlClLastFlipCauseread-onlycurrentThe cause of last flip.
1.3.6.1.4.1.164.3.3.2.3NodemdlPs
1.3.6.1.4.1.164.3.3.2.3.1TablemdlPsTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.2.3.1.1RowmdlPsEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.2.3.1.1.1ColumnmdlPsIdxread-onlycurrentThis object indicates the PS card referred.
1.3.6.1.4.1.164.3.3.2.3.1.1.2ColumnmdlPsStatusread-onlycurrentThis object indicates the status of the PS card.
1.3.6.1.4.1.164.3.3.2.3.1.1.3ColumnmdlPsTestResultread-onlycurrentThis object indicates the result of the PS card test. ok (1) - the test passed successfully. f12V (2) - 12V FAIL was detected f5V (3) - 5V FAIL was detected.
1.3.6.1.4.1.164.3.3.3NodeprtDacsMux
1.3.6.1.4.1.164.3.3.3.1NodeprtGen
1.3.6.1.4.1.164.3.3.3.1.1TableprtGenParamTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.3.1.1.1RowprtGenEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.3.1.1.1.1ColumnprtGenPrtIdxread-onlycurrentThis attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi…
1.3.6.1.4.1.164.3.3.3.1.1.1.2ColumnprtGenSltread-onlycurrentThis attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25…
1.3.6.1.4.1.164.3.3.3.1.1.1.3ColumnprtGenExtIntread-onlycurrentThis attribute describes the type of the designated port. Exteral port is a port with a physical connector. Internal port might be of two types, one is a compo…
1.3.6.1.4.1.164.3.3.3.1.1.1.4ColumnprtGenIfIndexread-onlycurrentThis attribute indicates the unique interface number assigned to the port. The specific interface of this attribute is the same as the interface identified by …
1.3.6.1.4.1.164.3.3.3.1.1.1.5ColumnprtGenActiveStatusread-onlycurrentThis attribute describes the activity status of the port. unknown(1) indicates that the information is not supported. notUsed(2) indicates that the port is not…
1.3.6.1.4.1.164.3.3.3.1.1.1.6ColumnprtGenAlrStatusread-onlycurrentIndicates the alarm state at port (ch) agent level. This object will be: - critical(7): when there is at least one active (ON) critical alarm . - major (3): wh…
1.3.6.1.4.1.164.3.3.3.1.1.1.7ColumnprtGenTestStatusread-onlycurrentThis attribute will be on(3) when there is at least one test in progress (running) on the port; otherwise the value will be off(2).
1.3.6.1.4.1.164.3.3.3.1.1.1.8ColumnprtGenTestMaskread-onlycurrentThis is a mask which indicates which tests from the 'prtGenTestCmd' list are allowed for the selected port. If a specific test is allowed, its respective bit w…
1.3.6.1.4.1.164.3.3.3.1.1.1.9ColumnprtGenTestCmdread-writecurrentSetting this object to a value as detailed furter on (except 0) will initiate a test on the specific port, if the operation is allowed (according to TestMask).…
1.3.6.1.4.1.164.3.3.3.1.1.1.10ColumnprtGenTestRunningread-onlycurrentThis object indicates which tests are running currently on the selected port (initiated by user and/or by the system). If a specific test is currently running …
1.3.6.1.4.1.164.3.3.3.1.1.1.11ColumnprtGenTyperead-onlycurrentThis object describes the type of the selected port. idsl - applicable for external ports of HS-U cards (of DXC) when interface is LT-1.
1.3.6.1.4.1.164.3.3.3.1.1.1.12ColumnprtGenInterfaceTyperead-onlycurrentThis attribute indicates a unique HW interface type of the selected port. Examples: - for T1 cards: DSU, CSU - for E1 cards: DSU, LTU - for HS cards: v35, rs42…
1.3.6.1.4.1.164.3.3.3.1.1.1.13ColumnprtGenAlrClearCmdread-writecurrentSetting this attribute to ON, will enforce a clear operation on the port level alarms . Upon completion, the value will automatically change to off(2). noOp - …
1.3.6.1.4.1.164.3.3.3.1.1.1.14ColumnprtGenAlrMaskAllread-writecurrenton(3) - will mask all the alarms of the selected port off(2)- will unmask all alarms of the selected port except the ones selected by the prtAlrMaskTable. noOp…
1.3.6.1.4.1.164.3.3.3.1.1.1.15ColumnprtGenParamStatusread-onlycurrentThis object indicates Status of parameters specific to the selected port. - For a port that has no special status or is supported by prtSExHsfStatTable - 1 Oct…
1.3.6.1.4.1.164.3.3.3.1.1.1.16ColumnprtGenRdnStatusread-onlycurrentThis object indicates if this port is part of a redundant pair and in this case, if it is On or Off. none(1) - No redundancy or Not Applicable off (2) - the po…
1.3.6.1.4.1.164.3.3.3.1.1.1.17ColumnprtGenTestMaskXPread-onlycurrentThis is an Expanded test mask of the prtGenTestMask object. The prtGenTestMask object reached its maximum, being an Integer with 31 bits. This object indicates…
1.3.6.1.4.1.164.3.3.3.1.1.1.18ColumnprtGenTestCmdXPread-writecurrentThis is an Expanded test command of the prtGenTestCmd object. The prtGenTestCmd object reached its maximum, being an Integer with 31 bits. Setting this object …
1.3.6.1.4.1.164.3.3.3.1.1.1.19ColumnprtGenTestRunningXPread-onlycurrentThis is an Expanded object of the prtGenTestRunning object. The prtGenTestRunning object reached its maximum, being an Integer with 31 bits. This object indica…
1.3.6.1.4.1.164.3.3.3.1.2TableprtGenTestDurationTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.3.1.2.1RowprtGenTestDurationEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.3.1.2.1.1ColumnprtGenTestPrtIdxread-onlycurrentThis attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi…
1.3.6.1.4.1.164.3.3.3.1.2.1.2ColumnprtGenTestIdxread-onlycurrentThis attribute indicates the test, the duration refers.
1.3.6.1.4.1.164.3.3.3.1.2.1.3ColumnprtGenTestDurationread-writecurrentThis attribute indicates the maximum duration of executing a test on the specific port. This entry applies to the specified test . The resolution will be a min…
1.3.6.1.4.1.164.3.3.3.1.3TableprtGenTsTablenot-accessiblecurrentThe write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch),exept some products which enable direct writing to the ActiveCnfg. T…
1.3.6.1.4.1.164.3.3.3.1.3.1RowprtGenTsEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.3.1.3.1.1ColumnprtGenTsCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.3.3.1.3.1.2ColumnprtGenTsPrtIdxread-onlycurrentThis attribute indicates a unique port number. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP…
1.3.6.1.4.1.164.3.3.3.1.3.1.3ColumnprtGenTsIdxread-onlycurrentThis attribute indicates a unique time slot position. The valid time slots are 1..25 for T1 Card (25=Fbit) 0..31 for E1 or HS Card . In G732S-E1 lines time slo…
1.3.6.1.4.1.164.3.3.3.1.3.1.4ColumnprtGenTsTyperead-writecurrentThe type of Timeslot. If the source or destination port is an HS port,'TS Type' must be 'data'. nc - means that this TimeSlot is not connected. voice, data, vc…
1.3.6.1.4.1.164.3.3.3.1.3.1.5ColumnprtGenTsIConPrtread-writecurrentThis attribute indicates the internally (In Mux) connected port. The valid port number depends on the IO slot no., the installed card type and the port type: o…
1.3.6.1.4.1.164.3.3.3.1.3.1.6ColumnprtGenTsIConTsread-writecurrentThis attribute indicates a unique time slot position. The valid time slots are 1..25 for T1 Card (25=Fbit) 0..31 for E1 (or HS) Card. In G732S-E1 lines time sl…
1.3.6.1.4.1.164.3.3.3.1.4NodeprtAlr
1.3.6.1.4.1.164.3.3.3.1.4.1TableprtSAlarmTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.3.1.4.1.1RowprtSAlarmEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.3.1.4.1.1.1ColumnprtSAlarmIdxread-onlycurrentA unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecuti…
1.3.6.1.4.1.164.3.3.3.1.4.1.1.2ColumnprtSAlarmPrtIdxread-onlycurrentThis attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi…
1.3.6.1.4.1.164.3.3.3.1.4.1.1.3ColumnprtSAlarmCoderead-onlycurrentThis object indicates a code related to a specific alarm description. The list of codes and their related descriptions will be sent to NMS request (for display…
1.3.6.1.4.1.164.3.3.3.1.4.1.1.4ColumnprtSAlarmStateread-onlycurrentThis object indicates the port alarm severity.
1.3.6.1.4.1.164.3.3.3.1.4.1.1.5ColumnprtSAlarmMaskread-onlycurrentAlarm Mask is : on/off.
1.3.6.1.4.1.164.3.3.3.1.4.1.1.6ColumnprtSAlarmInvertread-onlycurrentAlarm Invert is : on/off.
1.3.6.1.4.1.164.3.3.3.1.4.1.1.7ColumnprtSAlarmOnOffread-onlycurrentAlarm state is : on/off.
1.3.6.1.4.1.164.3.3.3.1.4.1.1.8ColumnprtSAlarmCounterread-onlycurrentA counter - how many times the alarm occured (ON) since last clear operation or since last Reset.
1.3.6.1.4.1.164.3.3.3.1.4.2TableprtAlrMaskTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.3.1.4.2.1RowprtAlrMaskEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.3.1.4.2.1.1ColumnprtAlrMaskPrtIdxread-onlycurrentThis attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi…
1.3.6.1.4.1.164.3.3.3.1.4.2.1.2ColumnprtAlrMaskread-writecurrentThis object is a mask that indicates which port level alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor taken…
1.3.6.1.4.1.164.3.3.3.1.5TableprtBertTablenot-accessiblecurrentThis table includes the BERT parameters, counters and commands. The configurable parameters: - prtBertPattern - prtBertInjectRate - prtBertTs are not Set per c…
1.3.6.1.4.1.164.3.3.3.1.5.1RowprtBertEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.3.1.5.1.1ColumnprtBertPrtIdxread-onlycurrentThis attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi…
1.3.6.1.4.1.164.3.3.3.1.5.1.2ColumnprtBertPatternread-writecurrentThis object indicates the pattern of the BERT. p2Exxm1 = 2Exx-1. pxx = pattern xx. This object is the same for all configurations. notApplicable - when this ob…
1.3.6.1.4.1.164.3.3.3.1.5.1.3ColumnprtBertInjectRateread-writecurrentThis object indicates the error rate injection of the BERT. r10Emx = 10E-x This object is the same for all configurations. single - single error injection. not…
1.3.6.1.4.1.164.3.3.3.1.5.1.4ColumnprtBertInjectErrRateCmdread-writecurrentThis object controls activation/deactivation of the Error Rate Injection during BERT.
1.3.6.1.4.1.164.3.3.3.1.5.1.5ColumnprtBertInjectSingleErrCmdread-writecurrentThis object enables to initiate a Single Error Injection during BERT (on). Upon completion, the value will automatically change to off(2).
1.3.6.1.4.1.164.3.3.3.1.5.1.6ColumnprtBertRunTimeread-onlycurrentThis object indicates how much time (seconds) passed since BERT started to run.
1.3.6.1.4.1.164.3.3.3.1.5.1.7ColumnprtBertESsread-onlycurrentHow many Errored Seconds were detected since BERT started to run. Counter for Kmux and MP.
1.3.6.1.4.1.164.3.3.3.1.5.1.8ColumnprtBertSyncLossread-onlycurrentHow many times Sync Loss was detected since BERT started to run. For some products: number of seconds in which Sync Loss occured since BERT started to run. See…
1.3.6.1.4.1.164.3.3.3.1.5.1.9ColumnprtBertErrorBitsread-onlycurrentHow many Error Bits were detected since BERT started to run.
1.3.6.1.4.1.164.3.3.3.1.5.1.10ColumnprtBertClearCountersread-writecurrentSetting this object to ON, will enforce a clear operation of some BERT Counters. Upon completion, the value will automatically change to off(2).
1.3.6.1.4.1.164.3.3.3.1.5.1.11ColumnprtBertSyncStatusread-onlycurrentSync Status while BERT runs.
1.3.6.1.4.1.164.3.3.3.1.5.1.12ColumnprtBertTsread-writecurrentThis object indicates on which TSs of the selected port, BERT should be applied. Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will not be us…
1.3.6.1.4.1.164.3.3.3.1.5.1.13ColumnprtBertResultread-onlycurrentThis object indicates Result of BERT for the selected port (number of error bits divided to the total number of data bits.) Applicable only if BERT is running …
1.3.6.1.4.1.164.3.3.3.1.5.1.14ColumnprtBertTxBitsread-onlycurrentHow many data bits were transmitted since BERT started to run, or since last counter clear (prtBertClearCounters set to on).
1.3.6.1.4.1.164.3.3.3.1.5.1.15ColumnprtBertRxBitsread-onlycurrentHow many data bits were Received since BERT started to run, or since last counter clear (prtBertClearCounters set to on).
1.3.6.1.4.1.164.3.3.3.1.5.1.16ColumnprtBertTxErrorBitsread-onlycurrentNumber of injected error bits since BERT started to run, or since last counter clear (prtBertClearCounters set to on).
1.3.6.1.4.1.164.3.3.3.1.6TableprtMonTablenot-accessiblecurrentFor DXC, the write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch).
1.3.6.1.4.1.164.3.3.3.1.6.1RowprtMonEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.3.1.6.1.1ColumnprtMonCnfgIdxread-onlycurrentThis object indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg. For products that do not support configurations, 1 will be…
1.3.6.1.4.1.164.3.3.3.1.6.1.2ColumnprtMonitoringIdxread-onlycurrentThis object indicates the Monitoring Port Index. For DXC: The valid port number depends on the IO slot no., the installed card type and the port type: external…
1.3.6.1.4.1.164.3.3.3.1.6.1.3ColumnprtMonitoringEnableread-writecurrentThis object indicates if the prtMonitoringIdx is configured as a monitoring port or not. disabled = the port is NOT configured to monitor. Setting this object …
1.3.6.1.4.1.164.3.3.3.1.6.1.4ColumnprtMonitoringTSsread-writecurrentThis object indicates which TSs of the Monitoring port, the test equipment should monitor. Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will…
1.3.6.1.4.1.164.3.3.3.1.6.1.5ColumnprtMonitoredPortread-writecurrentThis object indicates the MONITORED Port Index that the Monitoring port monitors. For DXC: The valid port number depends on the IO slot no., the installed card…
1.3.6.1.4.1.164.3.3.3.1.6.1.6ColumnprtMonitoredTSsread-writecurrentThis object indicates which TSs of the Monitored port, should be monitored. Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will not be used. I…
1.3.6.1.4.1.164.3.3.3.1.7NodeprtCfgParam
1.3.6.1.4.1.164.3.3.3.1.7.1TableprtCfgParamTablenot-accessiblecurrentThe write operation into the Table Objects is valid only to the TmpCnfg entry. KMUX parameters are for the cards: KMBE/New, KVF.6 family.
1.3.6.1.4.1.164.3.3.3.1.7.1.1RowprtCfgParamEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.3.1.7.1.1.1ColumnprtCfgParamCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.3.3.1.7.1.1.2ColumnprtCfgParamIdxread-onlycurrentA unique identifier of the port (within the card when applicable). - For KM-2100: Slot*100+Ch external ports: Ch=1..10 internal ports (sub-channels): Ch=11..20…
1.3.6.1.4.1.164.3.3.3.1.7.1.1.3ColumnprtCfgParamSltread-onlycurrentThis attribute indicates a unique number to identify the slot where the card is inserted in. In the 2104 Unit the entries kmxIO5(111)..kmxIO12(118) are not val…
1.3.6.1.4.1.164.3.3.3.1.7.1.1.4ColumnprtCfgParamOperatedMlread-writecurrentThe main link for this channel. The field is relevant only for ML modes of Dual, Priority Bumping and Switched Backup.
1.3.6.1.4.1.164.3.3.3.1.7.1.1.5ColumnprtCfgParamMlAtoMlBPrioread-writecurrentML-A to ML-B Priority. The field is relevant only for ML modes of Priority Bumping and Switched Backup.
1.3.6.1.4.1.164.3.3.3.1.7.1.1.6ColumnprtCfgParamMlBtoMlAPrioread-writecurrentML-B to ML-A Priority. The field is relevant only for ML modes of Priority Bumping.
1.3.6.1.4.1.164.3.3.3.1.7.1.1.7ColumnprtCfgParamInbandLoopDetectionread-writecurrentInband Loop Detection. The field is relevant for FCD-T1/E1(L) ports.
1.3.6.1.4.1.164.3.3.3.1.7.1.1.8ColumnprtCfgParamInbandLoopPatternCfgread-writecurrentThis object indicates if Inband Loop polynomial pattern will be according to RDL Loop (the standard) or User Configurated according to prtCfgParamInbandLoopAct…
1.3.6.1.4.1.164.3.3.3.1.7.1.1.9ColumnprtCfgParamInbandLoopActPatternread-writecurrentThis object is a binary string of up to 8 bits. Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The st…
1.3.6.1.4.1.164.3.3.3.1.7.1.1.10ColumnprtCfgParamInbandLoopDeactPatternread-writecurrentThis object is a binary string of up to 8 bits. Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The st…
1.3.6.1.4.1.164.3.3.3.2NodeprtT1E1
1.3.6.1.4.1.164.3.3.3.2.1TableprtT1E1StatTablenot-accessiblecurrentT1/E1 port statistics table.
1.3.6.1.4.1.164.3.3.3.2.1.1RowprtT1E1StatEntrynot-accessiblecurrentAn entry in the T1/E1 port statistics table.
1.3.6.1.4.1.164.3.3.3.2.1.1.1ColumnprtT1E1SPrtIdxread-onlycurrentThis attribute indicates a unique port number. The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card typ…
1.3.6.1.4.1.164.3.3.3.2.1.1.2ColumnprtT1E1SSltread-onlycurrentThis attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25…
1.3.6.1.4.1.164.3.3.3.2.1.1.3ColumnprtT1E1OosCountread-onlycurrentThis object is applicable only for an E1 active port. It provides the number of red alarm events since the last count clearing.
1.3.6.1.4.1.164.3.3.3.2.1.1.4ColumnprtT1E1BpvLastMinread-onlycurrentThis object is applicable only for an E1 active port. It provides the number of BPV (BiPolar Violation) events detected during the last minute.
1.3.6.1.4.1.164.3.3.3.2.1.1.5ColumnprtT1E1BpvMaxread-onlycurrentThis object is applicable only for an E1 active port. It provides the maximal number of BPV (BiPolar Violation) events (per minute), detected during the worst …
1.3.6.1.4.1.164.3.3.3.2.2TableprtT1E1CnfgTablenot-accessiblecurrentT1/E1 port configuration table.
1.3.6.1.4.1.164.3.3.3.2.2.1RowprtT1E1CnfgEntrynot-accessiblecurrentAn entry in the T1/E1 port configuration table.
1.3.6.1.4.1.164.3.3.3.2.2.1.1ColumnprtT1E1CnfgIdxread-onlycurrentThis attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config.
1.3.6.1.4.1.164.3.3.3.2.2.1.2ColumnprtT1E1PrtIdxread-onlycurrentThis attribute indicates a unique port number. The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card typ…
1.3.6.1.4.1.164.3.3.3.2.2.1.3ColumnprtT1E1Sltread-onlycurrentThis attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25…
1.3.6.1.4.1.164.3.3.3.2.2.1.4ColumnprtT1E1LineTyperead-writecurrentThis variable indicates the variety of T1/E1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can rea…
1.3.6.1.4.1.164.3.3.3.2.2.1.5ColumnprtT1E1LineCoderead-writecurrentThis variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. jbzs=b7zs refers the Jamm…
1.3.6.1.4.1.164.3.3.3.2.2.1.6ColumnprtT1E1SignalModeread-writecurrent'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that T1 Robbed Bit Signaling is in use. 'bitOriented' indicates…
1.3.6.1.4.1.164.3.3.3.2.2.1.7ColumnprtT1E1Fdlread-writecurrentThis bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a protocol other than one following i…
1.3.6.1.4.1.164.3.3.3.2.2.1.8ColumnprtT1E1FdlModeread-writecurrentFdl Mode of the T1 selected port. notApplicable - will be used for an E1 port.
1.3.6.1.4.1.164.3.3.3.2.2.1.9ColumnprtT1E1Syncread-writecurrentThis object enables returning to normal operation, after the end of a main/sub link red alarm event, in reduced time. 'tr62411' - complies with AT&T TR-62411 (…
1.3.6.1.4.1.164.3.3.3.2.2.1.10ColumnprtT1E1CGAread-writecurrentThis object selects the method used to signal the CGA state to the other end, through the main/sub link. 'none' - non-transparent mode. When one of the links (…
1.3.6.1.4.1.164.3.3.3.2.2.1.11ColumnprtT1E1IdleCoderead-writecurrentThis object selects the code transmitted to fill idle (unused) time slots in the main link frame. Valid range: (0 - FF HEX) .
1.3.6.1.4.1.164.3.3.3.2.2.1.12ColumnprtT1E1OosSignalread-writecurrent'idle' = '0' = on-hook, idle state 'busy' = '1' = off-hook, busy state 'forcedIdle' = SP = both A and B signaling bits are forced to '0' during out-of-service …
1.3.6.1.4.1.164.3.3.3.2.2.1.13ColumnprtT1E1VoiceOosread-writecurrentVoice Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0.
1.3.6.1.4.1.164.3.3.3.2.2.1.14ColumnprtT1E1DataOosread-writecurrentData Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0.
1.3.6.1.4.1.164.3.3.3.2.2.1.15ColumnprtT1E1LineLengthMaskread-writecurrentThis attribute is the line length mask parameter used only for T1/DSU interfaces. len400p533ft=length range: 400ft to 533ft 'fcc68' - provides compliance with …
1.3.6.1.4.1.164.3.3.3.2.2.1.16ColumnprtT1E1TxGainMaskread-writecurrentThis attribute is the tx gain mask parameter (dB), used only for T1/CSU interfaces.
1.3.6.1.4.1.164.3.3.3.2.2.1.17ColumnprtT1E1InbandMngread-writecurrentA unique number to identify an Inband management over the link. internal - supported by KM-2100 only. It means that the management is internal to the frame. It…
1.3.6.1.4.1.164.3.3.3.2.2.1.18ColumnprtT1E1InbandMngRateread-writecurrentA unique number to identify the rate of the Inband management. It is required only for E1 links and is applicable only when prtExT1E1InbandMng selected is FdlO…
1.3.6.1.4.1.164.3.3.3.2.2.1.19ColumnprtT1E1DedicatedTsread-writecurrentThe value is differently determined for different products. There are two methods: 1) A unique number to identify Dedicated TS of the T1/E1 port. It is applica…
1.3.6.1.4.1.164.3.3.3.2.2.1.20ColumnprtT1E1InbandMngRoutProtread-writecurrentInband Mng Routing Protocol of the port. When prtT1E1InbandMng is 'dedicatedPpp'-'proprietary' and 'rip2' are applicable. For other values - only 'proprietary'…
1.3.6.1.4.1.164.3.3.3.2.2.1.21ColumnprtT1E1LinkModeread-writecurrentregular - TSs are connected by user via TS Assignment only transparent - when a port with this Link Mode is connected to an internal T1/E1 port of a T3/E3 card…
1.3.6.1.4.1.164.3.3.3.2.2.1.22ColumnprtT1E1Multiplierread-writecurrentThe data rate of each TS. The multiplier values can be 56 kbps or 64 kbps. For T1 only.
1.3.6.1.4.1.164.3.3.3.2.2.1.23ColumnprtT1E1RxGainread-writecurrentThis attribute is the rx volume (dB).
1.3.6.1.4.1.164.3.3.3.2.2.1.24ColumnprtT1E1RAIread-writecurrentRemote Alarm Signal
1.3.6.1.4.1.164.3.3.3.2.2.1.25ColumnprtT1E1LineModeread-writecurrentInterface type of the port. For T1 - csu, dsu are the valid values For E1 - dsu, ltu are the valid values
1.3.6.1.4.1.164.3.3.3.2.2.1.26ColumnprtT1E1TS0SaBitsread-writecurrentThis object is applicable only for E1 ports. For T1, string size will be 0. For E1, it enables user to select the use of TS0 Sa Bits 4..8, by 3 octets: The ord…
1.3.6.1.4.1.164.3.3.3.2.2.1.27ColumnprtT1E1ConnectedTSread-onlycurrentThis parameter indicates if there is any connected TS for this interface.
1.3.6.1.4.1.164.3.3.3.2.2.1.28ColumnprtT1E1Ts0SaBitread-writecurrentThis parameter indicates whether to send TS 0, or not. noMng= TS 0 is looped, therefore not sent. mng= TS 0 isn't looped, therefore it is sent.
1.3.6.1.4.1.164.3.3.3.2.2.1.29ColumnprtT1E1SameFeCnfgread-writecurrentThis parameter indicates whether the same E1 configuration parameters and TS assignment are set both to the local and remote device. Read-Write access is appli…
1.3.6.1.4.1.164.3.3.3.2.2.1.30ColumnprtT1E1RemCrc4read-writecurrentThis object indicates whether the E1 of the Remote device connected to this E1 port, will have CRC-4 or not.
1.3.6.1.4.1.164.3.3.3.2.2.1.31ColumnprtT1E1MaxTSsread-writecurrentThis object is applicable only for DXC D4T1, D4E1, D8T1, D8E1 external ports and D8GSL internal E1 ports. It is relevant only when sysCIntTsAllocMode=static(2)…
1.3.6.1.4.1.164.3.3.3.2.2.1.32ColumnprtT1E1EocTsConfigread-writecurrentThis object indicates whether the use of EOC for TS Configuration is enabled or not.
1.3.6.1.4.1.164.3.3.3.2.2.1.33ColumnprtT1E1Roleread-writecurrentThis object indicates whether this port behaves as SUB or Main link.
1.3.6.1.4.1.164.3.3.3.2.2.1.34ColumnprtT1E1PppEchoFailDetectionread-writecurrentThis object indicates whether the PPP Echo is taken into account for its Fail Detection. This object is relevant when Inband Mng between devices is Dedicated T…
1.3.6.1.4.1.164.3.3.3.2.3TableprtT1E1FdlMsgTablenot-accessiblecurrentThis table is applicable for a T1 interface with 'esf' LineType or E1 interface, when CRC is enabled (LineType).
1.3.6.1.4.1.164.3.3.3.2.3.1RowprtT1E1FdlMsgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.3.2.3.1.1ColumnprtT1E1FdlMsgPrtIdxread-onlycurrentThis attribute indicates a unique port number. The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card typ…
1.3.6.1.4.1.164.3.3.3.2.3.1.2ColumnprtT1E1FdlMsgFdlTyperead-onlycurrentThe Fdl type reference of the Fdl message.
1.3.6.1.4.1.164.3.3.3.2.3.1.3ColumnprtT1E1FdlMsgSltread-onlycurrentThis attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25…
1.3.6.1.4.1.164.3.3.3.2.3.1.4ColumnprtT1E1FdlMsgread-onlycurrentFDL message.
1.3.6.1.4.1.164.3.3.3.3NodeprtHS
1.3.6.1.4.1.164.3.3.3.3.1TableprtHSParamTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.3.3.1.1RowprtHSParamEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.3.3.1.1.1ColumnprtHSCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config.
1.3.6.1.4.1.164.3.3.3.3.1.1.2ColumnprtHSPrtIdxread-onlycurrentThis attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi…
1.3.6.1.4.1.164.3.3.3.3.1.1.3ColumnprtHSSltread-onlycurrentThis attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25…
1.3.6.1.4.1.164.3.3.3.3.1.1.4ColumnprtHSRateread-writecurrentThis object indicates the port rate (speed). auto - rate is selected automatically by system.
1.3.6.1.4.1.164.3.3.3.3.1.1.5ColumnprtHSFifoSizeread-writecurrentThis object selects the size of the user data channel buffer FIFO used in the DTE2 mode. In the other modes, buffer size is automatically set by the DACS agent…
1.3.6.1.4.1.164.3.3.3.3.1.1.6ColumnprtHSClkModeread-writecurrentClock Mode of the user data channel. dce - DACS operates as a DCE and provides transmit and receive clocks to the synchronous user DTE. dte1- DACS supplies the…
1.3.6.1.4.1.164.3.3.3.3.1.1.7ColumnprtHSCTSread-writecurrentSelection of CTS line state in the user data channel. on - CTS continuously ON. rts - CTS line follows the RTS line.
1.3.6.1.4.1.164.3.3.3.3.1.1.8ColumnprtHSRtsStateread-onlycurrentRTS state of the port.
1.3.6.1.4.1.164.3.3.3.3.1.1.9ColumnprtHSInbandLoopbackread-writecurrentThis object indicates if Inband Loopback from the Network should be enabled or disabled.
1.3.6.1.4.1.164.3.3.3.3.1.1.10ColumnprtHSInbandLoopPatternCfgread-writecurrentThis object indicates if Inband Loop polynomial pattern will be according to RDL Loop (the standard) or User Configurated according to prtHSActivatePolyPattern…
1.3.6.1.4.1.164.3.3.3.3.1.1.11ColumnprtHSInbandLoopActPatternread-writecurrentThis object is a binary string of up to 8 bits. Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The st…
1.3.6.1.4.1.164.3.3.3.3.1.1.12ColumnprtHSInbandLoopDeactPatternread-writecurrentThis object is a binary string of up to 8 bits. Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The st…
1.3.6.1.4.1.164.3.3.3.3.1.1.13ColumnprtHSDCDread-writecurrentSelection of DCD line state in the user data channel. linkOK - DCD line is ON only when active link is OK. on - DCD continuously ON.
1.3.6.1.4.1.164.3.3.3.3.1.1.14ColumnprtHSClkPolarityread-writecurrentThis object indicates the clock polarity.
1.3.6.1.4.1.164.3.3.3.3.1.1.15ColumnprtHSInterfaceTyperead-writecurrentThis object indicates the selected electrical interface type.
1.3.6.1.4.1.164.3.3.3.3.1.1.16ColumnprtHSUnframedread-writecurrentUnframed line for HS ports. yes - means that all TSs must be transferred, including TS0. In this case, prtHSRate must be r31x56eq1736Kbps OR r31x64eq1984Kbps.
1.3.6.1.4.1.164.3.3.3.3.2TableprtHSBertTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.3.3.2.1RowprtHSBertEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.3.3.2.1.1ColumnprtHSBertPrtIdxread-onlycurrentThis attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi…
1.3.6.1.4.1.164.3.3.3.3.2.1.2ColumnprtHSBertSltread-onlycurrentThis attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25…
1.3.6.1.4.1.164.3.3.3.3.2.1.3ColumnprtHSBertCountClrread-writecurrentSetting this object (to on) initiate bert counter clear operation. Valid only when bert test is active on the specific port. (Every time a new bert test starts…
1.3.6.1.4.1.164.3.3.3.3.2.1.4ColumnprtHSBertTestResultread-onlycurrentThis object indicates the number of Bit Error Rate indicated during the BERT test. Active only when bert test is running on the selected port.
1.3.6.1.4.1.164.3.3.3.4NodeprtSP
1.3.6.1.4.1.164.3.3.3.4.1TableprtSpCnfgTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.3.4.1.1RowprtSpCnfgEntrynot-accessiblecurrentAll the entries at this table are identical(have the same value) at all the configurations(1..255) except at the TmpCnfg. - For products supporting more than o…
1.3.6.1.4.1.164.3.3.3.4.1.1.1ColumnprtSpCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.3.3.4.1.1.2ColumnprtSpPrtIdxread-onlycurrentThis attribute indicates a unique port number of the SPor DP port. For DXC, it is the port in the active DCL card: - SP = 1 - NP ; DP = 2 For Kilomux, the port…
1.3.6.1.4.1.164.3.3.3.4.1.1.3ColumnprtSpUsageread-writecurrentThis attribute indicates what is the usage of the port.
1.3.6.1.4.1.164.3.3.3.4.1.1.4ColumnprtSpRateread-writecurrentThis attribute indicates the operation rate (speed) of the port. auto - automatic rate selection, by the agent.
1.3.6.1.4.1.164.3.3.3.4.1.1.5ColumnprtSpDataBitsread-writecurrentThis attribute indicates the number of data bits in async frame
1.3.6.1.4.1.164.3.3.3.4.1.1.6ColumnprtSpParityread-writecurrentThis attribute indicates the parity mode in async frame
1.3.6.1.4.1.164.3.3.3.4.1.1.7ColumnprtSpCallOutModeread-writecurrentThis attribute indicates the call-out mode. For DXC - this object is applicable only for the DP port (2).
1.3.6.1.4.1.164.3.3.3.4.1.1.8ColumnprtSpInterfaceread-writecurrentThis attribute indicates the supervisory port interface. dce - the DACS appears as a DCE for the port. dte - the DACS operates as a DTE, for connection via mod…
1.3.6.1.4.1.164.3.3.3.4.1.1.9ColumnprtSpCTSread-writecurrentCTS line state. This object is applicable only for port (1) = SP
1.3.6.1.4.1.164.3.3.3.4.1.1.10ColumnprtSpDcdDelayread-writecurrentDCD delay in msec. d10 = delay of 10msec. This object is applicable only for port (1) = SP
1.3.6.1.4.1.164.3.3.3.4.1.1.11ColumnprtSpDsrread-writecurrentDSR line state. This object is applicable only for port (1) = SP
1.3.6.1.4.1.164.3.3.3.4.1.1.12ColumnprtSpNoOfRetriesread-writecurrentFor DXC - this object is applicable only for port (2) = DP. The number of dialing retries requested. Default = 0
1.3.6.1.4.1.164.3.3.3.4.1.1.13ColumnprtSpWaitForConnectread-writecurrentFor DXC - this object is applicable only for port (2) = DP. Waiting time for connect, in seconds. Default = 30 sec.
1.3.6.1.4.1.164.3.3.3.4.1.1.14ColumnprtSpDialModeread-writecurrentFor DXC - this object is applicable only for port (2) = DP. Dialing mode. Default=tone
1.3.6.1.4.1.164.3.3.3.4.1.1.15ColumnprtSpAltNumModeread-writecurrentFor DXC - this object is applicable only for port (2) = DP. It determines wether to use the alternate number or not. Default = no.
1.3.6.1.4.1.164.3.3.3.4.1.1.16ColumnprtSpPrimaryNumread-writecurrentFor DXC - this object is applicable only for port (2) = DP. It is the Primary dialing number.
1.3.6.1.4.1.164.3.3.3.4.1.1.17ColumnprtSpAltNumread-writecurrentFor DXC - this object is applicable only for port (2) = DP. It is the Alternate dialing number. This number is applicable only if prtSpAltNumMode is 'yes'.
1.3.6.1.4.1.164.3.3.3.4.1.1.18ColumnprtSpRoutProtocolread-writecurrentThis attribute indicates the routing protocol of the port. notApplicable - for DP.
1.3.6.1.4.1.164.3.3.3.4.1.1.19ColumnprtSpCmdread-writecurrentSP Command. For LRS this parameter will be used for a Modem Command. Upon NMS's Get operation for devices that this parameter is notApplicable, agent will send…
1.3.6.1.4.1.164.3.3.3.4.1.1.20ColumnprtSpActCallOutread-writecurrentThis object indicates when to Activate Call-Out. It is used by FCD-T1/E1. always - to activate call-out always. linkFail - to activate call-out only when Link …
1.3.6.1.4.1.164.3.3.3.4.1.1.21ColumnprtSpAlrRelayModeread-writecurrentThis attribute indicates the Alarm Relay Mode. notApplicable - for DP.
1.3.6.1.4.1.164.3.3.3.4.1.1.22ColumnprtSpStopBitsread-writecurrentThis attribute indicates number of stop bits in an async frame.
1.3.6.1.4.1.164.3.3.3.5NodeprtDim
1.3.6.1.4.1.164.3.3.3.5.1TableprtDimCnfgTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.3.5.1.1RowprtDimCnfgEntrynot-accessiblecurrentThe write operation into the Table Objects is valid only for the TmpCnfg entry (prtDimCnfgIdx=255).
1.3.6.1.4.1.164.3.3.3.5.1.1.1ColumnprtDimCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.3.3.5.1.1.2ColumnprtDimIdxread-onlycurrentThis attribute indicates a unique port number of the DIM card. The convention used for DXC: (IO slot number+10)*10 + 1 Example: port1 of IO slot 11 will be: 21…
1.3.6.1.4.1.164.3.3.3.5.1.1.3ColumnprtDimTxModeread-writecurrentTx mode. regularTx - the links are connected to a similar outfit on the other side. In this mode, if a link fails, the transmitted bandwidth is decreased accor…
1.3.6.1.4.1.164.3.3.3.5.1.1.4ColumnprtDimPolarityread-writecurrentPolarity.
1.3.6.1.4.1.164.3.3.3.5.1.1.5ColumnprtDimClkModeread-writecurrentClock Mode. smooth - a clock that is not 'pulsed'(has no 'gaps'). In this mode the DXC does NOT receive back the clock signal. extSmooth - same as 'smooth' but…
1.3.6.1.4.1.164.3.3.3.5.1.1.6ColumnprtDimMaxDelayread-writecurrentMax Delay permitted between the links, in msec.
1.3.6.1.4.1.164.3.3.3.5.1.1.7ColumnprtDimMngread-writecurrentUse of DIM port for management. disabled - no management on DIM ts1 - 1 bit of TS1 is used for management.
1.3.6.1.4.1.164.3.3.3.5.1.1.8ColumnprtDimMngRoutProtread-writecurrentMng Routing Protocol of the port. none - when prtDimMng is 'disabled'.
1.3.6.1.4.1.164.3.3.3.5.2TableprtDimDestTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.3.5.2.1RowprtDimDestEntrynot-accessiblecurrentThe write operation is valid only for the TmpCnfg entry (prtDimDestCnfgIdx=255).
1.3.6.1.4.1.164.3.3.3.5.2.1.1ColumnprtDestCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.3.3.5.2.1.2ColumnprtDestDimIdxread-onlycurrentThis attribute indicates a unique port number of the DIM card. The convention used for DXC: (IO slot number+10) & 1 Example: port1 of IO slot 11 will be: 211 .
1.3.6.1.4.1.164.3.3.3.5.2.1.3ColumnprtDestIdxread-onlycurrentThis attribute indicates a destination number of the DIM card.
1.3.6.1.4.1.164.3.3.3.5.2.1.4ColumnprtDestread-writecurrentDestination port,(of a T1/E1 port), that is connected to the DIM card, for the specified Destination number. 0 = No destination port. Else: For external ports:…
1.3.6.1.4.1.164.3.3.3.5.2.1.5ColumnprtDestConnectread-onlycurrentConnection Status of the specified destination number. For a specified destination port, it depends both on the status of the port and on the status of the far…
1.3.6.1.4.1.164.3.3.3.6NodeprtI
1.3.6.1.4.1.164.3.3.3.6.1TableprtICnfgTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.3.6.1.1RowprtICnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.3.6.1.1.1ColumnprtICnfgIdxread-onlycurrentThis attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config.
1.3.6.1.4.1.164.3.3.3.6.1.1.2ColumnprtIIdxread-onlycurrentThis attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi…
1.3.6.1.4.1.164.3.3.3.6.1.1.3ColumnprtIRateread-writecurrentThis object indicates the port rate in bits. Each TS contains 8 bits. Thus, 1 bit is equivalent to 8Kbps rate.
1.3.6.1.4.1.164.3.3.3.6.1.1.4ColumnprtIConnectread-writecurrentD channel connection. no - disconnected yes - connected.
1.3.6.1.4.1.164.3.3.3.7NodeprtHdsl
1.3.6.1.4.1.164.3.3.3.7.1TableprtHdslTablenot-accessiblecurrentHDSL port table.
1.3.6.1.4.1.164.3.3.3.7.1.1RowprtHdslEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.3.7.1.1.1ColumnprtHdslIdxread-onlycurrentThis attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi…
1.3.6.1.4.1.164.3.3.3.7.1.1.2ColumnprtHdslModeread-writecurrentThis object indicates the HDSL mode.
1.3.6.1.4.1.164.3.3.3.7.1.1.3ColumnprtHdslRptrTyperead-onlycurrentThe Repeater between Near and Far modem. none - no repeater exists between the modems hrpt - HRPT repeater exists between the modems.
1.3.6.1.4.1.164.3.3.3.7.1.1.4ColumnprtHdslMaxRateread-writecurrentMaximum Rate of the xDSL Line, in Kbps units. This object can be Set only for a Central unit.
1.3.6.1.4.1.164.3.3.3.7.1.1.5ColumnprtHdslLinkTyperead-onlycurrentThe Link Type. msdsl2w - MSDSL 2 Wire hdsl2w - HDSL 2 Wire hdsl4w - HDSL 4 Wire gDsl - G.DSL
1.3.6.1.4.1.164.3.3.3.7.1.1.6ColumnprtHdslCompSwVerread-onlycurrentThis object indicates the Software Version of the component (Piggyback card) supporting this interface.
1.3.6.1.4.1.164.3.3.3.7.1.1.7ColumnprtHdslCompHwVerread-onlycurrentThis object indicates the Hardware Version of the component (Piggyback card) supporting this interface.
1.3.6.1.4.1.164.3.3.3.8NodeprtT3E3
1.3.6.1.4.1.164.3.3.3.8.1TableprtT3E3CnfgTablenot-accessiblecurrentT3/E3 port configuration table.
1.3.6.1.4.1.164.3.3.3.8.1.1RowprtT3E3CnfgEntrynot-accessiblecurrentAn entry in the T3/E3 port configuration table.
1.3.6.1.4.1.164.3.3.3.8.1.1.1ColumnprtT3E3CnfgIdxread-onlycurrentThis attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For DXC, write operations can be performed…
1.3.6.1.4.1.164.3.3.3.8.1.1.2ColumnprtT3E3PrtIdxread-onlycurrentThis attribute indicates a unique port number. For DXC: The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed…
1.3.6.1.4.1.164.3.3.3.8.1.1.3ColumnprtT3E3Sltread-onlycurrentThis attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25…
1.3.6.1.4.1.164.3.3.3.8.1.1.4ColumnprtT3E3LineLengthread-writecurrentThis object is the length of the ds3 line in feet. It provides information for line build out circuitry if it exists and can use this object to adjust the line…
1.3.6.1.4.1.164.3.3.3.8.1.1.5ColumnprtT3E3InbandMngread-writecurrentA unique number to identify the Frame Type over the link. For Optimux-T3: only values (4), (7) are supported.
1.3.6.1.4.1.164.3.3.3.8.1.1.6ColumnprtT3E3AisFrameread-writecurrentThis object is applicable only for Optimux-T3. It allows user to select whether the AIS sent will be framed or unframed.
1.3.6.1.4.1.164.3.3.3.8.1.1.7ColumnprtT3E3TxClockSourceread-writecurrentTx Clock Source.
1.3.6.1.4.1.164.3.3.3.8.1.1.8ColumnprtT3E3RoutProtread-writecurrentRouting Protocol of the port. This object is applicable only for T3 ports.
1.3.6.1.4.1.164.3.3.3.8.1.1.9ColumnprtT3E3AisTransmitread-writecurrentIndicates if AIS signal will be transmitted over the tributary E3/DS3 upon failure.
1.3.6.1.4.1.164.3.3.4NodegenDacsMux
1.3.6.1.4.1.164.3.3.4.1TablecmprTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.4.1.1RowcmprEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.4.1.1.1ColumncmprTypeIdxread-onlycurrentThis object indicates the Type of the Compressed data referred (which table, which level, etc). The type is a code according to a convention between agent and …
1.3.6.1.4.1.164.3.3.4.1.1.2ColumncmprCnfgIdxread-onlycurrentThis object indicates the configuration number the Compressed information relates to.
1.3.6.1.4.1.164.3.3.4.1.1.3ColumncmprVersionread-onlycurrentThis object indicates the version of the internal format of the Compressed data (the version of the convention used).
1.3.6.1.4.1.164.3.3.4.1.1.4ColumncmprSltIdxread-onlycurrentThis attribute indicates a unique number of the slot position where the card is inserted. When the unit is stand-alone or this object is not applicable, 255 wi…
1.3.6.1.4.1.164.3.3.4.1.1.5ColumncmprPrtIdxread-onlycurrentThis object indicates a unique identifier of the port, the compressed information relates to. For DXC - according to the order in the card of cmprSltIdx: - fir…
1.3.6.1.4.1.164.3.3.4.1.1.6ColumncmprObjread-writecurrentThis object is the compressed information itself, according to a predefined format, both agent and NMS agreed about.
1.3.6.1.4.1.164.3.3.4.2TablemapLinkTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.4.2.1RowmapLinkEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.4.2.1.1ColumnmapLinkIdxread-onlycurrentA unique identifier of the link
1.3.6.1.4.1.164.3.3.4.2.1.2ColumnmapLinkSlotIdxread-writecurrentThis attribute indicates a unique slot position where the module is inserted.
1.3.6.1.4.1.164.3.3.4.2.1.3ColumnmapLinkPortIdxread-writecurrentThis attribute indicates a unique port number. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP…
1.3.6.1.4.1.164.3.3.4.2.1.4ColumnmapLinkStateread-onlycurrentThis attribute indicates the status of the link between the two muxes
1.3.6.1.4.1.164.3.3.4.3TablealrGenTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.3.4.3.1RowalrGenEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.4.3.1.1ColumnalrGenCoderead-onlycurrentThis object is a unique code number, identifying a certain alarm.
1.3.6.1.4.1.164.3.3.4.3.1.2ColumnalrGenDescriptionread-onlycurrentThis entry is a unique text description, of the alarm corresponding to the specified code.
1.3.6.1.4.1.164.3.3.4.3.1.3ColumnalrGenLevelread-onlycurrentAlarm level.
1.3.6.1.4.1.164.3.3.4.3.1.4ColumnalrGenSlotTyperead-onlycurrentSlot type that the alarm is relevant to. clAndIo - an alarm that is relevant for both CL and IO slots.
1.3.6.1.4.1.164.3.3.4.3.1.5ColumnalrGenSeverityread-writecurrentThis object enables the user to select a severity for each alarm. The severity is set per alarm code (same for all slots/ports using this code).
1.3.6.1.4.1.164.3.3.4.3.1.6ColumnalrGenDebounceread-writecurrentDebounce time for each alarm code, in seconds. The meaning is, that an alarm will be 'declared' as ON (or OFF), only after it was actually ON/OFF the Debouncin…
1.3.6.1.4.1.164.3.3.4.3.1.7ColumnalrGenDefSeverityread-onlycurrentThis object reports the default severity of each alarm. User can change the severity of the alarms defined by this default via the alrGenSeverity object.
1.3.6.1.4.1.164.4NoderadBridges
1.3.6.1.4.1.164.4.1NodegenBridge
1.3.6.1.4.1.164.4.1.1ScalarradBridgeActionread-writecurrentThis variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions are not currently imple…
1.3.6.1.4.1.164.4.1.2ScalarradBridgeInactiveArpTimeOutread-writecurrentThis variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is del…
1.3.6.1.4.1.164.4.1.3TableradBridgeMaskTablenot-accessiblecurrentMask tables enable definition of forwarding restrictions and control of message flow in the internetwork. Each entry in this table defines a mask statement con…
1.3.6.1.4.1.164.4.1.3.1RowradBridgeMaskEntrynot-accessiblecurrentAn entry in table radBridgeMaskTable.
1.3.6.1.4.1.164.4.1.3.1.1ColumnradBridgeMaskTyperead-onlycurrentDefines the type of mask entry.
1.3.6.1.4.1.164.4.1.3.1.2ColumnradBridgeMaskIfIndexread-onlycurrentSpecifies the if Index of the interface to which the mask is applied.
1.3.6.1.4.1.164.4.1.3.1.3ColumnradBridgeMaskNumread-onlycurrentThe Mask entry number, defined by its line number in the mask table.
1.3.6.1.4.1.164.4.1.3.1.4ColumnradBridgeMaskDestread-writecurrentSpecifies the type of destination address carried by the frame to which the mask will be applied. Unassigned-condition deactivates the mask entry.
1.3.6.1.4.1.164.4.1.3.1.5ColumnradBridgeMaskPat1read-writecurrentDescribes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern.
1.3.6.1.4.1.164.4.1.3.1.6ColumnradBridgeMaskActiveBit1read-writecurrentSpecifies the positions of the wild card characters (*) in the radBridgeMaskPat1 field.
1.3.6.1.4.1.164.4.1.3.1.7ColumnradBridgeMaskFrom1read-writecurrentOffset base of radBridgeMaskPat1 within the frame. Net can be in some cases the data start point.
1.3.6.1.4.1.164.4.1.3.1.8ColumnradBridgeMaskOffset1read-writecurrentSpecifies the radBridgeMaskPat1 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm1.The mask offset is an even decimal number in …
1.3.6.1.4.1.164.4.1.3.1.9ColumnradBridgeMaskCond1read-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset1 the packet contains data th…
1.3.6.1.4.1.164.4.1.3.1.10ColumnradBridgeMaskPat2read-writecurrentDescribes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern.
1.3.6.1.4.1.164.4.1.3.1.11ColumnradBridgeMaskActiveBit2read-writecurrentSpecifies the positions of the wild card characters (*) in the radBridgeMaskPat2 field.
1.3.6.1.4.1.164.4.1.3.1.12ColumnradBridgeMaskFrom2read-writecurrentOffset base of radBridgeMaskPat2 within the frame. Net can be in some cases the data start point.
1.3.6.1.4.1.164.4.1.3.1.13ColumnradBridgeMaskOffset2read-writecurrentSpecifies the radBridgeMaskPat2 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm2.The mask offset is an even decimal number in …
1.3.6.1.4.1.164.4.1.3.1.14ColumnradBridgeMaskCond2read-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset2 the packet contains data th…
1.3.6.1.4.1.164.4.1.3.1.15ColumnradBridgeMaskPat3read-writecurrentDescribes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern.
1.3.6.1.4.1.164.4.1.3.1.16ColumnradBridgeMaskActiveBit3read-writecurrentSpecifies the positions of the wild card characters (*) in the radBridgeMaskPat3 field.
1.3.6.1.4.1.164.4.1.3.1.17ColumnradBridgeMaskFrom3read-writecurrentOffset base of radBridgeMaskPat3 within the frame. Net can be in some cases the data start point.
1.3.6.1.4.1.164.4.1.3.1.18ColumnradBridgeMaskOffset3read-writecurrentSpecifies the radBridgeMaskPat3 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm3. The mask offset is an even decimal number in…
1.3.6.1.4.1.164.4.1.3.1.19ColumnradBridgeMaskCond3read-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset3 the packet contains data th…
1.3.6.1.4.1.164.4.1.3.1.20ColumnradBridgeMaskOperread-writecurrentThe type of action to be taken if the frame meets the conditions of the mask. noOp = disabled (mask remains on list, but is not active) delete = mask is remove…
1.3.6.1.4.1.164.4.1.4NoderadBridgeCOD
1.3.6.1.4.1.164.4.1.4.1TableradBridgeCODParamTablenot-accessiblecurrentThe table of COD parameters
1.3.6.1.4.1.164.4.1.4.1.1RowradBridgeCODEntrynot-accessiblecurrentEach radBridgeCODEntry consists of the following parameters
1.3.6.1.4.1.164.4.1.4.1.1.1ColumnradBridgeCODIfIndexread-onlycurrentThe interface to which this COD entry is applicable.
1.3.6.1.4.1.164.4.1.4.1.1.2ColumnradBridgeCODManualConnectread-writecurrentThe management station can start connection manually by setting this parameter
1.3.6.1.4.1.164.4.1.4.1.1.3ColumnradBridgeCODModeread-writecurrentIn answer mode only one incoming call may be accepted at a time. Other nodes attempting to access the local modem will receive a busy signal until the connecti…
1.3.6.1.4.1.164.4.1.4.1.1.4ColumnradBridgeCODConnectDelayread-writecurrentThe connect delay defines the minimum time period that the link must stay disconnected, between 2 succesive connections (in seconds).
1.3.6.1.4.1.164.4.1.4.1.1.5ColumnradBridgeCODisConnectDelayread-writecurrentThe disconnect delay defines the minimum time period the link must stay connected, between 2 succesive disconnections (in seconds).
1.3.6.1.4.1.164.4.1.4.1.1.6ColumnradBridgeCODImplicitSwitchread-writecurrentThe inplicit switch allows the user to ignore implicit triggers provided by the COD software.
1.3.6.1.4.1.164.4.1.4.1.1.7ColumnradBridgeCODNumAccessread-onlycurrentThe number of successful connections that have been established since the COD has been reset.
1.3.6.1.4.1.164.4.1.4.1.1.8ColumnradBridgeCODTotalConnecTimeread-onlycurrentThe sum of all the connect time intervals since the COD was reset.
1.3.6.1.4.1.164.4.1.4.2TableradBridgeCODTimeTriggerTablenot-accessiblecurrentThe table of COD parameters
1.3.6.1.4.1.164.4.1.4.2.1RowradBridgeCODTimeTriggerEntrynot-accessiblecurrentEach radBridgeCODTimeTriggerEntry consists of the following parameters
1.3.6.1.4.1.164.4.1.4.2.1.1ColumnradBridgeCODTimeIfIndexread-onlycurrentThe interface to which this COD Time Trigger entry is applicable.
1.3.6.1.4.1.164.4.1.4.2.1.2ColumnradBridgeCODDayread-onlycurrentThe day of the week in which the dial up connection operates.
1.3.6.1.4.1.164.4.1.4.2.1.3ColumnradBridgeCODTimeTriggerNumread-onlycurrentEvery day of the week the user can configure 3 dial up connections.
1.3.6.1.4.1.164.4.1.4.2.1.4ColumnradBridgeCODTimeTriggerFromread-writecurrentTime to start Dial Up connection, in format hh:mm.
1.3.6.1.4.1.164.4.1.4.2.1.5ColumnradBridgeCODTimeTriggerToread-writecurrentTime to terminate Dial Up connection, in format HH:MM.
1.3.6.1.4.1.164.4.1.4.2.1.6ColumnradBridgeCODTimeTriggerStatusread-writecurrentThe status of a table entry.
1.3.6.1.4.1.164.4.1.4.3NoderadBridgeCODTraffic
1.3.6.1.4.1.164.4.1.4.3.1TableradBridgeCODTrafficTablenot-accessiblecurrentThe table of COD Traffic trigger
1.3.6.1.4.1.164.4.1.4.3.1.1RowradBridgeCODTrafficEntrynot-accessiblecurrentEach radBridgeCODTrafficEntry consists of the following parameters.
1.3.6.1.4.1.164.4.1.4.3.1.1.1ColumnradBridgeCODProtocolTyperead-onlycurrentThe Protocol Type of the Traffic Table
1.3.6.1.4.1.164.4.1.4.3.1.1.2ColumnradBridgeCODTrafficTriggerStatusread-writecurrentCommand of Status of the Protocol Traffic Trigger
1.3.6.1.4.1.164.4.1.4.3.2ScalarradBridgeCODRemoteIPAddrread-writecurrentThis is the Remote IP Address
1.3.6.1.4.1.164.4.1.4.3.3ScalarradBridgeCODIPMaskread-writecurrentThis is the Mask of the Remote IP Address
1.3.6.1.4.1.164.4.1.4.3.4ScalarradBridgeCODTrafficTriggerProtTyperead-writecurrentProtocol Type for the User Defined Protocol Traffic Trigger (3).
1.3.6.1.4.1.164.4.1.4.4TableradBridgeCODCondTablenot-accessiblecurrentThe table of COD Condition parameters
1.3.6.1.4.1.164.4.1.4.4.1RowradBridgeCODCondEntrynot-accessiblecurrentEach radBridgeCODCondEntry consists of the following parameters
1.3.6.1.4.1.164.4.1.4.4.1.1ColumnradBridgeCODCondIfIndexread-onlycurrentThe interface, this COD entry is applicable to.
1.3.6.1.4.1.164.4.1.4.4.1.2ColumnradBridgeCODOriginateConnectConditionread-writecurrentThis condition, allows the user to specify the condition under which the link is connected. The options are onPowerOn - On power on. whenAnyStationOnLan - When…
1.3.6.1.4.1.164.4.1.4.4.1.3ColumnradBridgeCODOriginateDisConnectConditionread-writecurrentThis condition allows the user to specify the condition under which the link is disconnected. The options are: noStationOnLan - When there is no station on lan…
1.3.6.1.4.1.164.4.1.4.4.1.4ColumnradBridgeCODOriginateDisConnectDelayread-writecurrentDelay time in seconds.
1.3.6.1.4.1.164.4.1.4.4.1.5ColumnradBridgeCODAnswerConnectConditionread-writecurrentCODCondAnswerConnect allows the user to specify the condition under which the link is connected. The options are: onPowerOn - On power on. whenAnyStationOnLan …
1.3.6.1.4.1.164.4.1.4.4.1.6ColumnradBridgeCODSpecificOnTrafficOIDConditionread-onlycurrentA reference to a specific entry in the radBridgeMaskTable, which describes the particular COD condition . If Connect or Disconnect Conditions are not onTraffic…
1.3.6.1.4.1.164.4.1.4.4.1.7ColumnradBridgeCODDisConnectMinimunFramesNumberread-writecurrentFrames rate.
1.3.6.1.4.1.164.4.1.5NoderadBridgeIPX
1.3.6.1.4.1.164.4.1.5.1NoderadBridgeIPXdriver
1.3.6.1.4.1.164.4.1.5.1.1ScalarradBridgeIPXForwardingread-writecurrentThe indication of whether this entity is acting as an IPX gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IPX…
1.3.6.1.4.1.164.4.1.5.2NoderadBridgeIPXRip
1.3.6.1.4.1.164.4.1.5.2.1ScalarradBridgeIPXRipOutPacketsread-onlycurrentThe total number of packets transmitted by RIP.
1.3.6.1.4.1.164.4.1.5.2.2ScalarradBridgeIPXRipInPacketsread-onlycurrentThe total number of packets received by RIP. This will include any packets that are subsequently discarded.
1.3.6.1.4.1.164.4.1.5.2.3ScalarradBridgeIPXRipInDiscardsread-onlycurrentThe number of received packets discarded by RIP.
1.3.6.1.4.1.164.4.1.5.2.4ScalarradBridgeIPXRipTblNoOfEntriesread-onlycurrentThe max number of entries that exist in the RIP routing table.
1.3.6.1.4.1.164.4.1.5.2.5ScalarradBridgeIPXRipTblBcastTrigUpdateIntervalread-writecurrentThe default time interval (in seconds)between triggered RIP updates on a broadcast type interface. A triggered update occurs when a change is detected in the r…
1.3.6.1.4.1.164.4.1.5.2.6TableradBridgeIPXRipTablenot-accessiblecurrentThe routing table used by RIP to calculate routes to remote desination networks.
1.3.6.1.4.1.164.4.1.5.2.6.1RowradBridgeIPXRipTableEntrynot-accessiblecurrentThe routing information for one of this entity's destination networks.
1.3.6.1.4.1.164.4.1.5.2.6.1.1ColumnradBridgeIPXRipDestNetworkread-onlycurrentThe destination network address to which this entry's routing information pertains.
1.3.6.1.4.1.164.4.1.5.2.6.1.2ColumnradBridgeIPXRipPolicyread-onlycurrentA value specifying the precidence of the route. A value of zero means that the route is the best route, a value of one means that the route is the second best …
1.3.6.1.4.1.164.4.1.5.2.6.1.3ColumnradBridgeIPXRipForwardingRouterread-writecurrentThe IPX node address of the next hop (router) for the entry's associated destination network.
1.3.6.1.4.1.164.4.1.5.2.6.1.4ColumnradBridgeIPXRipNICread-writecurrentAn interface identifier specifying what IPX interface the next hop can be found on.
1.3.6.1.4.1.164.4.1.5.2.6.1.5ColumnradBridgeIPXRipTickMetricread-writecurrentThe metric, in terms of transit time, associated with the route given by the entry. This time is in terms of 1/18ths of a second.
1.3.6.1.4.1.164.4.1.5.2.6.1.6ColumnradBridgeIPXRipHopMetricread-writecurrentThe metric, in terms of distance , associated with the route given by the entry.
1.3.6.1.4.1.164.4.1.5.2.6.1.7ColumnradBridgeIPXRipAgingTimeread-onlycurrentThe last time that the entry was updated. The time will be provided in terms of the MIB-I object sysUpTime.
1.3.6.1.4.1.164.4.1.5.2.6.1.8ColumnradBridgeIPXRipValueStatusread-writecurrentThe entry status value; whether the entry is permanent (added statically), reachable or unreachable. In the latter two cases it would be added by RIP. A semiDy…
1.3.6.1.4.1.164.4.1.5.2.6.1.9ColumnradBridgeIPXRipForwardTyperead-writecurrentThe type of route. Note that local(2) refers to a route for which the next hop is the final destination; remote(3) refers to a route for which the next hop is …
1.3.6.1.4.1.164.4.1.5.2.7TableradBridgeIPXRipInfTablenot-accessiblecurrentThe RIP interface table.
1.3.6.1.4.1.164.4.1.5.2.7.1RowradBridgeIPXRipInfEntrynot-accessiblecurrentEach entry corresponds to one ifindex.
1.3.6.1.4.1.164.4.1.5.2.7.1.1ColumnradBridgeIPXRipInfIfIndexread-onlycurrentThis value of Ifindex is same as radBridgeIPXIfIndex in the IPX Interface Table.
1.3.6.1.4.1.164.4.1.5.2.7.1.2ColumnradBridgeIPXRipInfBcastUpdateread-writecurrentThe RIP periodic update interval, in seconds. Zero value corresponds to infinite interval.
1.3.6.1.4.1.164.4.1.5.2.7.1.3ColumnradBridgeIPXRipInfAgeMultiplierread-writecurrentThe holding multiplier for information received in RIP periodic updates. Zero value corresponds to infinite aging time.
1.3.6.1.4.1.164.4.1.5.3NoderadBridgeIPXSap
1.3.6.1.4.1.164.4.1.5.3.1ScalarradBridgeIPXSapOutPacketsread-onlycurrentThe total number of packets transmitted by SAP.
1.3.6.1.4.1.164.4.1.5.3.2ScalarradBridgeIPXSapInPacketsread-onlycurrentThe total number of packets received by SAP. This will include any packets that are subsequently discarded.
1.3.6.1.4.1.164.4.1.5.3.3ScalarradBridgeIPXSapInDiscardsread-onlycurrentThe number of received packets discarded by SAP.
1.3.6.1.4.1.164.4.1.5.3.4ScalarradBridgeIPXSapTblNoOfEntriesread-onlycurrentThe max number of entries that exist in the SAP Server Information table.
1.3.6.1.4.1.164.4.1.5.3.5ScalarradBridgeIPXSapTblBcastTrigUpdateIntervalread-writecurrentThe default time interval (in seconds) between triggered SAP updates on a broadcast style interface. A triggered update occurs when a change is detected in the…
1.3.6.1.4.1.164.4.1.5.3.6TableradBridgeIPXSapTablenot-accessiblecurrentThe Server Information table is used by SAP to store information of services which are available on the internetwork.
1.3.6.1.4.1.164.4.1.5.3.6.1RowradBridgeIPXSapTableEntrynot-accessiblecurrentThe server information for one of this entity's server entries.
1.3.6.1.4.1.164.4.1.5.3.6.1.1ColumnradBridgeIPXSapServerTyperead-onlycurrentThe type of the server for which this entry pertains.
1.3.6.1.4.1.164.4.1.5.3.6.1.2ColumnradBridgeIPXSapNameread-onlycurrentThe name of the server for which this entry pertains.
1.3.6.1.4.1.164.4.1.5.3.6.1.3ColumnradBridgeIPXSapNetworkread-writecurrentThe IPX network address of the host on which this server exists.
1.3.6.1.4.1.164.4.1.5.3.6.1.4ColumnradBridgeIPXSapNoderead-writecurrentThe IPX node address of the host on which this server exists.
1.3.6.1.4.1.164.4.1.5.3.6.1.5ColumnradBridgeIPXSapSocketread-writecurrentThe IPX socket number that is being used by the server to which this entry pertains.
1.3.6.1.4.1.164.4.1.5.3.6.1.6ColumnradBridgeIPXSapHopsToServerread-writecurrentThe number of hops to the entity on which this server exists.
1.3.6.1.4.1.164.4.1.5.3.6.1.7ColumnradBridgeIPXSapNICread-writecurrentAn Network Interface Card identifier specifying what IPX interface the next hop can be found on.
1.3.6.1.4.1.164.4.1.5.3.6.1.8ColumnradBridgeIPXSapAgingTimeread-onlycurrentThe last time that the entry was updated. The time will be provided in terms of the MIB-I object sysUpTime.
1.3.6.1.4.1.164.4.1.5.3.6.1.9ColumnradBridgeIPXSapStatusread-writecurrentThe status of the entry.
1.3.6.1.4.1.164.4.1.5.3.7TableradBridgeIPXSapInfTablenot-accessiblecurrentThe Sap interface table.
1.3.6.1.4.1.164.4.1.5.3.7.1RowradBridgeIPXSapInfEntrynot-accessiblecurrentEach entry corresponds to one ifindex.
1.3.6.1.4.1.164.4.1.5.3.7.1.1ColumnradBridgeIPXSapInfIfIndexread-onlycurrentThis value of Ifindex is same as radBridgeIPXIfIndex in the IPX Interface Table.
1.3.6.1.4.1.164.4.1.5.3.7.1.2ColumnradBridgeIPXSapInfBcastUpdateread-writecurrentThe SAP periodic update interval, in seconds. Zero value corresponds to infinite interval.
1.3.6.1.4.1.164.4.1.5.3.7.1.3ColumnradBridgeIPXSapInfAgeMultiplierread-writecurrentThe holding multiplier for information received in SAP periodic updates. Zero value corresponds to infinite aging time.
1.3.6.1.4.1.164.4.1.6NodenewMasking
1.3.6.1.4.1.164.4.1.6.1ScalarmaskingMaxEntriesread-onlycurrentThe maximum number of entries in the masking table.
1.3.6.1.4.1.164.4.1.6.2ScalarmaskingCurrentEntriesread-onlycurrentThe number of entries in the mask table.
1.3.6.1.4.1.164.4.1.6.3TablemaskingTablenot-accessiblecurrentThis is the new masking scheme. Mask tables enable definition of forwarding restrictions and control of message flow in the internetwork. Each entry in this ta…
1.3.6.1.4.1.164.4.1.6.3.1RowmaskingEntrynot-accessiblecurrentDefines the contents of each line in the mask table.
1.3.6.1.4.1.164.4.1.6.3.1.1ColumnmaskingTyperead-onlycurrentDefines the type of mask entry.
1.3.6.1.4.1.164.4.1.6.3.1.2ColumnmaskingIfIndexread-onlycurrentSpecifies the ifIndex of the interface to which the mask is applied.
1.3.6.1.4.1.164.4.1.6.3.1.3ColumnmaskingIndexread-onlycurrentAn index to the masking table. This number should not be greater than maskingMaxEntries
1.3.6.1.4.1.164.4.1.6.3.1.4ColumnmaskingProtocolTyperead-writecurrentThe base protocol for masking. IPX, IP, others.
1.3.6.1.4.1.164.4.1.6.3.1.5ColumnmaskingSmartMaskOIDread-onlycurrentA reference to a specific Smart mask table (old radBridgeMaskTable) which enables a more specific mask type. If this information is not available, its value sh…
1.3.6.1.4.1.164.4.1.6.3.1.6ColumnmaskingFrameTyperead-writecurrentEnables the user to decide about frame type * all frame * just broadcast * just multicast.
1.3.6.1.4.1.164.4.1.6.3.1.7ColumnmaskingFrameTypeConditionread-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingFrameType the packet contains data that m…
1.3.6.1.4.1.164.4.1.6.3.1.8ColumnmaskingSourceAddressread-writecurrentThe source address is according to the maskingMacOrNet and maskingProtocolType variables. In case of 'MAC' enter 6 bytes (48 bit) of source address. In case of…
1.3.6.1.4.1.164.4.1.6.3.1.9ColumnmaskingSourceActiveBitsread-writecurrentSpecifies the positions of the wild card characters (*) in the maskingSourceAddress field. Only the 1's bit will be taken in considerations.
1.3.6.1.4.1.164.4.1.6.3.1.10ColumnmaskingSourceMacOrNetread-writecurrentThe variable maskingSourceAddress and maskingSourceActiveBits will be treated as MAC, or NET address. - If maskingProtocolType = 'all', 'sna', 'netbios', dec o…
1.3.6.1.4.1.164.4.1.6.3.1.11ColumnmaskingSourceConditionread-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingSourceAddress (in conjunction with maskin…
1.3.6.1.4.1.164.4.1.6.3.1.12ColumnmaskingDestAddressread-writecurrentIf maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. The destination a…
1.3.6.1.4.1.164.4.1.6.3.1.13ColumnmaskingDestActiveBitsread-writecurrentIf maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. Specifies the pos…
1.3.6.1.4.1.164.4.1.6.3.1.14ColumnmaskingDestMacOrNetread-writecurrentIf maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. - If maskingProto…
1.3.6.1.4.1.164.4.1.6.3.1.15ColumnmaskingDestConditionread-writecurrentIf maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. Specifies the log…
1.3.6.1.4.1.164.4.1.6.3.1.16ColumnmaskingLowLevelProtread-writecurrentThis field is set in conjunction with the maskingProtocolType variable. This variable specifies the low level protocol. The IPX socket entered in maskingDestAd…
1.3.6.1.4.1.164.4.1.6.3.1.17ColumnmaskingLowLevelProtConditionread-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingLowLevelProt the packet contains data tha…
1.3.6.1.4.1.164.4.1.6.3.1.18ColumnmaskingHighLevelProtread-writecurrentThis field is set in connection to the maskingProtocolType variable. This variable specifies the high level protocols (application). As for today it supports j…
1.3.6.1.4.1.164.4.1.6.3.1.19ColumnmaskingHighLevelProtConditionread-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingHighLevelProt the packet contains data th…
1.3.6.1.4.1.164.4.1.6.3.1.20ColumnmaskingPortNumread-writecurrentThe port number is the same as in high level protocol. It specifies the dest. port in IP case or the dest. socket in case of IPX & apple protocols. IP - This o…
1.3.6.1.4.1.164.4.1.6.3.1.21ColumnmaskingPortNumConditionread-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingPortNum the packet contains data that mat…
1.3.6.1.4.1.164.4.1.6.3.1.22ColumnmaskingOperationread-writecurrentThe type of action to be taken if the frame meets the conditions of the mask. noOp = disabled (mask remains on list, but is not active) delete = mask is remove…
1.3.6.1.4.1.164.4.1.6.3.1.23ColumnmaskingSrcPortNumread-writecurrentThe source port number. For IP: No Condition. For IPX: This object is applicable only if the socket entered in maskingSourceAddress is don't care (00) and mask…
1.3.6.1.4.1.164.4.1.6.3.1.24ColumnmaskingSrcPortNumConditionread-writecurrentThe same as 'maskingPortNumCondition'. Relates to source port.
1.3.6.1.4.1.164.4.1.7NoderadBridgePerformance
1.3.6.1.4.1.164.4.1.7.1TableradBridgeCurrentTablenot-accessiblecurrentThe RAD Bridge Current table.
1.3.6.1.4.1.164.4.1.7.1.1RowradBridgeCurrentEntrynot-accessiblecurrentAn entry in the RAD Bridge Current table.
1.3.6.1.4.1.164.4.1.7.1.1.1ColumnradBridgeCurrentIndexread-onlycurrentThe index of the Bridge interface or Bridge Port. It may be ifIndex.
1.3.6.1.4.1.164.4.1.7.1.1.2ColumnradBridgeCurrentIngressFilteringDiscardedFramesread-onlycurrentThe counter associated with the number of Discarded Frames upon Ingress Filtering, encountered by a Bridge interface in the current 15 minute interval.
1.3.6.1.4.1.164.4.1.7.1.1.3ColumnradBridgeCurrentFrameTypeDiscardedFramesread-onlycurrentThe counter associated with the number of Discarded Frames upon Frame Type and Tagging Mismatch, encountered by a Bridge interface in the current 15 minute int…
1.3.6.1.4.1.164.4.1.7.1.1.4ColumnradBridgeCurrentRxCorrectFramesread-onlycurrentThe counter associated with the number of Received Correct Frames, encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.4.1.7.1.1.5ColumnradBridgeCurrentRxCorrectBytesread-onlycurrentThe counter associated with the number of Received Correct Bytes, encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.4.1.7.1.1.6ColumnradBridgeCurrentRxCorrectBytesHCOverflowread-onlycurrentThe counter associated with the number of times the associated radBridgeCurrentRxCorrectBytes counter has overflowed.
1.3.6.1.4.1.164.4.1.7.1.1.7ColumnradBridgeCurrentRxBcastFramesread-onlycurrentThe counter associated with the number of Received Broadcast Frames, encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.4.1.7.1.1.8ColumnradBridgeCurrentRxMcastFramesread-onlycurrentThe counter associated with the number of Received Multicast Frames, encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.4.1.7.1.1.9ColumnradBridgeCurrentTxCorrectFramesread-onlycurrentThe counter associated with the number of Transmitted Correct Frames, encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.4.1.7.1.1.10ColumnradBridgeCurrentTxCorrectBytesread-onlycurrentThe counter associated with the number of Transmitted Correct Bytes, encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.4.1.7.1.1.11ColumnradBridgeCurrentTxCorrectBytesHCOverflowread-onlycurrentThe counter associated with the number of times the associated radBridgeCurrentTxCorrectBytes counter has overflowed.
1.3.6.1.4.1.164.4.1.7.1.1.12ColumnradBridgeCurrentTxBcastFramesread-onlycurrentThe counter associated with the number of Transmitted Broadcast Frames, encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.4.1.7.1.1.13ColumnradBridgeCurrentTxMcastFramesread-onlycurrentThe counter associated with the number of Transmitted Multicast Frames, encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.4.1.7.1.1.14ColumnradBridgeCurrentTxDropFramesread-onlycurrentThe counter associated with the number of Transmitted Dropped Frames, encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.4.1.7.2TableradBridgeIntervalTablenot-accessiblecurrentThe RAD Bridge Interval table.
1.3.6.1.4.1.164.4.1.7.2.1RowradBridgeIntervalEntrynot-accessiblecurrentAn entry in the RAD Bridge Interval table.
1.3.6.1.4.1.164.4.1.7.2.1.1ColumnradBridgeIntervalIndexread-onlycurrentThe index of the bridge interface or Bridge Port. It may be ifIndex.
1.3.6.1.4.1.164.4.1.7.2.1.2ColumnradBridgeIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.4.1.7.2.1.3ColumnradBridgeIntervalIngressFilteringDiscardedFramesread-onlycurrentThe counter associated with the number of Discarded Frames upon Ingress Filtering, encountered by a Bridge interface in one of the previous 96, individual 15 m…
1.3.6.1.4.1.164.4.1.7.2.1.4ColumnradBridgeIntervalFrameTypeDiscardedFramesread-onlycurrentThe counter associated with the number of Discarded Frames upon Frame Type and Tagging Mismatch, encountered by a Bridge interface in one of the previous 96, i…
1.3.6.1.4.1.164.4.1.7.2.1.5ColumnradBridgeIntervalRxCorrectFramesread-onlycurrentThe counter associated with the number of Received Correct Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.4.1.7.2.1.6ColumnradBridgeIntervalRxCorrectBytesread-onlycurrentThe counter associated with the number of Received Correct Bytes, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.4.1.7.2.1.7ColumnradBridgeIntervalRxCorrectBytesHCOverflowread-onlycurrentThe counter associated with the number of times the associated radBridgeIntervalRxCorrectBytes counter has overflowed.
1.3.6.1.4.1.164.4.1.7.2.1.8ColumnradBridgeIntervalRxBcastFramesread-onlycurrentThe counter associated with the number of Received Broadcast Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.4.1.7.2.1.9ColumnradBridgeIntervalRxMcastFramesread-onlycurrentThe counter associated with the number of Received Multicast Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.4.1.7.2.1.10ColumnradBridgeIntervalTxCorrectFramesread-onlycurrentThe counter associated with the number of Transmitted Correct Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.4.1.7.2.1.11ColumnradBridgeIntervalTxCorrectBytesread-onlycurrentThe counter associated with the number of Transmitted Correct Bytes, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.4.1.7.2.1.12ColumnradBridgeIntervalTxCorrectBytesHCOverflowread-onlycurrentThe counter associated with the number of times the associated radBridgeIntervalTxCorrectBytes counter has overflowed.
1.3.6.1.4.1.164.4.1.7.2.1.13ColumnradBridgeIntervalTxBcastFramesread-onlycurrentThe counter associated with the number of Transmitted Broadcast Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.4.1.7.2.1.14ColumnradBridgeIntervalTxMcastFramesread-onlycurrentThe counter associated with the number of Transmitted Multicast Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.4.1.7.2.1.15ColumnradBridgeIntervalTxDropFramesread-onlycurrentThe counter associated with the number of Transmitted Dropped Frames, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.4.1.8NoderadBridgePortBaseVlan
1.3.6.1.4.1.164.4.1.8.1TableradBridgePortBaseVlanTablenot-accessiblecurrentA table containing static configuration information for each VLAN configured into the device by management. All entries are permanent and will be restored afte…
1.3.6.1.4.1.164.4.1.8.1.1RowradBridgePortBaseVlanEntrynot-accessiblecurrentStatic information for a VLAN configured into the device by (local or network) management.
1.3.6.1.4.1.164.4.1.8.1.1.1ColumnradBridgePortBaseVlanCnfgIdxnot-accessiblecurrentThis object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Ag…
1.3.6.1.4.1.164.4.1.8.1.1.2ColumnradBridgePortBaseVlanIdxnot-accessiblecurrentIndex of the port based VLAN.
1.3.6.1.4.1.164.4.1.8.1.1.3ColumnradBridgePortBaseVlanNameread-createcurrentAn administratively assigned string, which may be used to identify the the port based VLAN.
1.3.6.1.4.1.164.4.1.8.1.1.4ColumnradBridgePortBaseVlanEgressPortsread-createcurrentThe set of ports which are permanently assigned to the egress list for this port based VLAN by management. The default value of this object is a string of zero…
1.3.6.1.4.1.164.4.1.8.1.1.5ColumnradBridgePortBaseVlanVirtualGroupsread-createcurrentThe set of Virtual Groups which are permanently assigned to this port based VLAN by management. (read Virtual Group instead of port in PortList Textual Convent…
1.3.6.1.4.1.164.4.1.8.1.1.6ColumnradBridgePortBaseVlanRowStatusread-createcurrentThis object enable user to create/delete entries in this table.
1.3.6.1.4.1.164.4.1.8.1.1.7ColumnradBridgePortBaseVlanMngread-createcurrentThis object allows user to enable/disable management traffic on this VLAN. disable - only non-management data is allowed. enable - mixture of management traffi…
1.3.6.1.4.1.164.4.1.8.2TableradBridgePortVlanMemberTablenot-accessiblecurrentThe Bridge Ports-VLAN Membership table. This table enables the user to assign: - Several VLANs to a Port. - Several Ports to a VLAN.
1.3.6.1.4.1.164.4.1.8.2.1RowradBridgePortVlanMemberEntrynot-accessiblecurrentAn entry in the Bridge Ports-VLANs Memebership table.
1.3.6.1.4.1.164.4.1.8.2.1.1ColumnradBridgePortVlanMemberBridgeIdxread-onlycurrentThis object indicates the Bridge Index.
1.3.6.1.4.1.164.4.1.8.2.1.2ColumnradBridgePortVlanMemberPortIdxread-onlycurrentThis object indicates the Bridge's Port Index. For some cases, it can be used as the Port ofIndex.
1.3.6.1.4.1.164.4.1.8.2.1.3ColumnradBridgePortVlanMemberVlanIdread-onlycurrentThis object indicates the VLAN ID.
1.3.6.1.4.1.164.4.1.8.2.1.4ColumnradBridgePortVlanMemberRowStatusread-createcurrentThis object enables the user to create/delete entries in this table.
1.3.6.1.4.1.164.4.1.9NoderadBridgeGenCnfg
1.3.6.1.4.1.164.4.1.9.1TableradBridgeGenFlowTablenot-accessiblecurrentA table containing static configuration information for Bridge configured into the device by (local or network) management. All entries are permanent and will …
1.3.6.1.4.1.164.4.1.9.1.1RowradBridgeGenFlowEntrynot-accessiblecurrentStatic information for a Bridge configured into the device by management.
1.3.6.1.4.1.164.4.1.9.1.1.1ColumnradBridgeGenFlowCnfgIdxnot-accessiblecurrentThis object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant Set is done only to this configuration). For Age…
1.3.6.1.4.1.164.4.1.9.1.1.2ColumnradBridgeGenFlowIdxnot-accessiblecurrentFor Agent having more than one bridge, this index may be used as bridge index
1.3.6.1.4.1.164.4.1.9.1.1.3ColumnradBridgeGenFlowRowStatusread-createcurrentThis object enable user to create/delete entries in this table.
1.3.6.1.4.1.164.4.1.9.1.1.4ColumnradBridgeGenFlowFloodOrBcastMaxRateread-createcurrentThis object controls maximum Flooding or Broadcast Rate: Max number of multicast along with unknown or flooded unicast frames allowed to enter any port. The nu…
1.3.6.1.4.1.164.4.1.9.1.1.5ColumnradBridgeGenFlowQosModeread-createcurrentThis object controls Quality of Service mode. User may select which field(s) (in case of fields - which one has precedence) will affect prioritization of data …
1.3.6.1.4.1.164.4.1.9.1.1.6ColumnradBridgeGenFlowSchedulingModeread-createcurrentThis object controls which scheduling mode is used: Weighted Fair Queuing (WFQ) scheme, Strict Priority (SP) or ATM CoS
1.3.6.1.4.1.164.4.1.9.1.1.7ColumnradBridgeGenFlowBasicClassificationread-createcurrentThis object defines whether Classification based on Port should be taken into account (either as default, or in addition to other classifications).
1.3.6.1.4.1.164.4.1.9.1.1.8ColumnradBridgeGenFlowMulticastTrafficClassread-createcurrentThe Traffic Class the received Multicast frame is mapped to.
1.3.6.1.4.1.164.4.1.9.1.1.9ColumnradBridgeGenFlowBroadcastTrafficClassread-createcurrentThe Traffic Class the received Broadcast frame is mapped to.
1.3.6.1.4.1.164.4.1.9.1.1.10ColumnradBridgeGenFlowUnkownUnicastTrafficClassread-createcurrentThe Traffic Class the received Unkonwn Unicast frame is mapped to.
1.3.6.1.4.1.164.4.1.9.2TableradBridgeDot1qVlanStaticTablenot-accessiblecurrentA table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and wi…
1.3.6.1.4.1.164.4.1.9.2.1RowradBridgeDot1qVlanStaticEntrynot-accessiblecurrentStatic information for a VLAN configured into the device by (local or network) management.
1.3.6.1.4.1.164.4.1.9.2.1.1ColumnradBridgeDot1qVlanTaggedPortsread-createcurrentThe set of ports which should transmit egress packets for this VLAN as tagged.
1.3.6.1.4.1.164.4.1.9.2.1.2ColumnradBridgeDot1qVlanUnmodifiedPortsread-createcurrentThe set of ports which should transmit egress packets for this VLAN as unmodified.
1.3.6.1.4.1.164.4.1.9.2.1.3ColumnradBridgeDot1qVlanSplitHorizonread-createcurrentWhen 'enable (3)', packets having this VLAN will not be switched back to other bridge ports which are members of this VLAN.
1.3.6.1.4.1.164.4.1.9.3TableradDot1qPortVlanTablenot-accessiblecurrentA table containing control and status information for VLAN configuration per port.
1.3.6.1.4.1.164.4.1.9.3.1RowradDot1qPortVlanEntrynot-accessiblecurrentInformation controlling VLAN configuration for a port. This is indexed by dot1dBasePort.
1.3.6.1.4.1.164.4.1.9.3.1.1ColumnradDot1qPortStackingread-writecurrentThis object indicates the port stacking operation: unmodify (2) = Do not add Tag. tag (3) = Add Tag to Untagged Frames. stack (4) = Add Tag to all Frames.
1.3.6.1.4.1.164.4.1.9.3.1.2ColumnradDot1qPortCopyOriginVlanPriorityread-writecurrentThis object indicates whether use the original VLAN Priority of the frame, as the priority of the VLAN added by this port.
1.3.6.1.4.1.164.4.1.9.3.1.3ColumnradDot1qPortDefaultVlanPriorityread-writecurrentDefault VLAN Frame priority of the VLAN added by this port.
1.3.6.1.4.1.164.4.1.9.3.1.4ColumnradDot1qPortTagStrippingread-writecurrentThis object indicates whether remove a tag from the frame on this port, frame with double tag will remain with one tag and frame with one tag will remain untag…
1.3.6.1.4.1.164.4.1.9.3.1.5ColumnradDot1qPortEgressTagHandlingread-writecurrentThis object indicates how is the Egress VLAN Tag processed. It is mainly for use with Double Tagging.
1.3.6.1.4.1.164.4.1.9.3.1.6ColumnradDot1qPortIngressTagHandlingread-writecurrentThis object indicates how is the Ingress VLAN Tag processed. It is mainly for use with Double Tagging.
1.3.6.1.4.1.164.4.1.9.3.1.7ColumnradDot1qPortReplaceVlanPriorityread-writecurrentThis object indicates whether for each received tagged frame on this Bridge Port - VLAN Priority will be replaced by another Priority. no(2) = no repacement ye…
1.3.6.1.4.1.164.4.1.9.3.1.8ColumnradDot1qPortVlanEthTyperead-writecurrentThis object indicates the Ethernet Type. For some devices, it is applicable only when radDot1qPortStacking = stack.
1.3.6.1.4.1.164.4.1.9.3.1.9ColumnradDot1qPortVlanCnodeLevel1Agentread-writecurrentSpecify if a Level 1 cNode agent is enabled or not for the bridge port.
1.3.6.1.4.1.164.4.1.9.4TableradBridgeGenCfgTablenot-accessiblecurrentA table containing Bridge configuration parameters.
1.3.6.1.4.1.164.4.1.9.4.1RowradBridgeGenCfgEntrynot-accessiblecurrentDescribes an entry in the radBridgeGenCfgTable.
1.3.6.1.4.1.164.4.1.9.4.1.1ColumnradBridgeGenCfgIdxnot-accessiblecurrentThis object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg. For Agents that support only one Configuration, this object wi…
1.3.6.1.4.1.164.4.1.9.4.1.2ColumnradBridgeGenCfgIdx2not-accessiblecurrentFor Agents having more than one bridge, this index may be used as bridge index
1.3.6.1.4.1.164.4.1.9.4.1.3ColumnradBridgeGenCfgBridgeActionread-writecurrentThis variable enables the operator to perform one of the specified actions on the tables maintained by the Bridge. After performing the action, Agent will auto…
1.3.6.1.4.1.164.4.1.9.4.1.4ColumnradBridgeAgingTimeSecread-writecurrentThis variable duplicates scalar object dot1dTpAgingTimeThe of BRIDGE-MIB with configuration index and Bridge index. It defines the timeout period in seconds fo…
1.3.6.1.4.1.164.4.1.9.4.1.5ColumnradBridgeMngVlanIdread-writecurrentThis variable indicates the VLAN ID used for remote management traffic. 0 = Not Applicable.
1.3.6.1.4.1.164.4.1.9.4.1.6ColumnradBridgeLoopDetectVlanIdread-writecurrentThis variable indicates the VLAN ID used for Loop Detection packets. Valid values: 1 - 4095: VLAN ID 0 - Means that the Loop Detection is Disabled.
1.3.6.1.4.1.164.4.1.9.4.1.7ColumnradBridgeSplitHorizonread-writecurrentThis object configure 'split horizon' switching between bridge Ports. - disable - normal (VLAN aware) bridge behavior. - enable - all packets, regardless their…
1.3.6.1.4.1.164.4.1.9.4.1.8ColumnradBridgeEthTyperead-writecurrentValue of Ethertype field in Ethernet frame. This field indicates which protocol is being transported in an ethernet frame.
1.3.6.1.4.1.164.4.1.9.5ScalarradBridgeAgingTimeread-writecurrentThis variable defines whether the Aging Time will be finite or infinite. When selecting the finite (3) value, the exact time will be determined by another vari…
1.3.6.1.4.1.164.4.1.9.6ScalarradBridgeMngFlowread-writecurrentThis variable defines whether the Management Flow is passed through the bridge (enable) or not (disable).
1.3.6.1.4.1.164.4.1.10NoderadBridgeStatus
1.3.6.1.4.1.164.4.1.10.1TableradBridgeInvBasePortTablenot-accessiblecurrentAn inversed table to dot1dBasePortTable from RFC1493 with reduced information. This table index is known to the NMS and this way the needed information can be …
1.3.6.1.4.1.164.4.1.10.1.1RowradBridgeInvBasePortEntrynot-accessiblecurrentThe bridge port number for each bridge port interface index.
1.3.6.1.4.1.164.4.1.10.1.1.1ColumnradBridgeInvBasePortIfIndexread-onlycurrentThe value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this Bridge port.
1.3.6.1.4.1.164.4.1.10.1.1.2ColumnradBridgeInvBasePortread-onlycurrentThe Bridge port number.
1.3.6.1.4.1.164.4.1.11NoderadBridgeStp
1.3.6.1.4.1.164.4.1.11.1TableradBridgeStpCnfgTablenot-accessiblecurrentSTP Configuration table. STP=Spanning Tree Protocol. It includes STP configurable parameters that in BRIDGE-MIB are scalars, while we need them per card/bridge…
1.3.6.1.4.1.164.4.1.11.1.1RowradBridgeStpCnfgEntrynot-accessiblecurrentAn entry in the radBridgeStpCnfgTable.
1.3.6.1.4.1.164.4.1.11.1.1.1ColumnradBridgeStpCnfgIdx1not-accessiblecurrentThis object indicates the Index of the Agent Configuration the following objects refer to. For Agents that support more than one configuration: 255=Temporary C…
1.3.6.1.4.1.164.4.1.11.1.1.2ColumnradBridgeStpCnfgIdx2not-accessiblecurrentFor Agents having the table objects per Card/Bridge/Interface this will be the index of the Card/Bridge/Interface used.
1.3.6.1.4.1.164.4.1.11.1.1.3ColumnradBridgeStpCnfgForwardDelayread-writecurrentThe value that the bridge of radBridgeStpCnfgIdx2 uses for Forward Delay when this bridge is acting as the root. Note that the range for this parameter is rela…
1.3.6.1.4.1.164.4.1.11.1.1.4ColumnradBridgeStpCnfgMaxAgeread-writecurrentThe value that the bridge of radBridgeStpCnfgIdx2 uses for MaxAge when this bridge is acting as the root. Note that the range for this parameter is related to …
1.3.6.1.4.1.164.4.1.11.1.1.5ColumnradBridgeStpCnfgHelloTimeread-writecurrentThe value that the bridge of radBridgeStpCnfgIdx2 uses for Hello Time when this bridge is acting as the root. The granularity of this timer is specified by 802…
1.3.6.1.4.1.164.4.1.11.1.1.6ColumnradBridgeStpCnfgPriorityread-writecurrentThe value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID, per radBridgeStpCnfgIdx2 instance.
1.3.6.1.4.1.164.4.1.11.1.1.7ColumnradBridgeStpCnfgStpVersionread-writecurrentThis object determines the STP version used: stp - usual Spanning Tree Protocol. rstp - Rapid Spanning Tree Protocol.
1.3.6.1.4.1.164.4.1.11.2TableradBridgeStpStatTablenot-accessiblecurrentSTP Status table. STP=Spanning Tree Protocol. It includes STP status parameters that in BRIDGE-MIB are scalars, while we need them per card/bridge/interface. F…
1.3.6.1.4.1.164.4.1.11.2.1RowradBridgeStpStatEntrynot-accessiblecurrentAn entry in the radBridgeStpStatTable.
1.3.6.1.4.1.164.4.1.11.2.1.1ColumnradBridgeStpStatIdxnot-accessiblecurrentFor Agents having the table objects per Card/Bridge/Interface this will be the index of the Card/Bridge/Interface used.
1.3.6.1.4.1.164.4.1.11.2.1.2ColumnradBridgeStpStatForwardDelayread-onlycurrentThis time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The…
1.3.6.1.4.1.164.4.1.11.2.1.3ColumnradBridgeStpStatMaxAgeread-onlycurrentThe maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is …
1.3.6.1.4.1.164.4.1.11.2.1.4ColumnradBridgeStpStatHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become …
1.3.6.1.4.1.164.4.1.11.2.1.5ColumnradBridgeStpStatDesignatedRootread-onlycurrentThe bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide…
1.3.6.1.4.1.164.4.1.11.2.1.6ColumnradBridgeStpStatRootCostread-onlycurrentThe cost of the path to the root as seen from this bridge.
1.3.6.1.4.1.164.4.1.12ScalarradBridgeForwardingModeread-writecurrentThis object determines the Bridge Forwarding Mode: transparent - Forward all frames received (not dependent on VLAN). filter - Filter frames received according…
1.3.6.1.4.1.164.4.1.13NoderadBridgePort
1.3.6.1.4.1.164.4.1.13.1TableradBridgePortCnfgTablenot-accessiblecurrentThe Bridge Port Configuration Table.
1.3.6.1.4.1.164.4.1.13.1.1RowradBridgePortCnfgEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.4.1.13.1.1.1ColumnradBridgePortCnfgIdxnot-accessiblecurrentThe first index of the table. It can serve for Configuration index, Bridge index or other.
1.3.6.1.4.1.164.4.1.13.1.1.2ColumnradBridgePortCnfgPrtIdxnot-accessiblecurrentThis object indicates the Bridge Port index.
1.3.6.1.4.1.164.4.1.13.1.1.3ColumnradBridgePortCnfgMaxMacAddrread-writecurrentThis object indicates the maximum number of total MAC Addresses (static and learned) supported by this Bridge Port.
1.3.6.1.4.1.164.4.1.13.1.1.4ColumnradBridgePortCnfgMngFlowread-writecurrentThis object indicates whether this Bridge Port is dedicated for management flow.
1.3.6.1.4.1.164.4.1.13.1.1.5ColumnradBridgePortCnfgMcastModeread-writecurrentThis object indicates this Bridge Port's Multicast Mode: flooding (1) - flood multicast MAC addresses forwarding (2) - forward multicast MAC addresses to the s…
1.3.6.1.4.1.164.4.1.13.1.1.6ColumnradBridgePortCnfgDefaultVpiread-writecurrentThis object indicates the VPI of this Bridge Port's Default VCL. An incoming frame with priority that is not assigned to any VCL will be transferred to the Def…
1.3.6.1.4.1.164.4.1.13.1.1.7ColumnradBridgePortCnfgDefaultVciread-writecurrentThis object indicates the VCI of this Bridge Port's Default VCL. An incoming frame with priority that is not assigned to any VCL will be transferred to the Def…
1.3.6.1.4.1.164.4.1.13.1.1.8ColumnradBridgePortCnfgStatVlanIdread-writecurrentThis object indicates the selected VlanId of the bridge port on which statistics are being collected. 0=no Statistics collected for VLAN on this bridge port.
1.3.6.1.4.1.164.4.1.13.1.1.9ColumnradBridgePortCnfgIngressMturead-writecurrentThe size of the largest packet which can be received on the interface, specified in octets.
1.3.6.1.4.1.164.4.1.13.1.1.10ColumnradBridgePortCnfgEgressMturead-writecurrentThe size of the largest packet which can be sent on the interface, specified in octets.
1.3.6.1.4.1.164.4.1.13.1.1.11ColumnradBridgePortCnfgDot1xread-writecurrentThis feature is currently supported via the variable ethIfTable.ethDot1xEnable. Determnines if the Port-Based Network Access Protocol (IEEE-802.1x)is enabled f…
1.3.6.1.4.1.164.5NoderadConverters
1.3.6.1.4.1.164.6NoderadGen
1.3.6.1.4.1.164.6.1Nodesystems
1.3.6.1.4.1.164.6.1.0IdentitysystemsEventscurrentThe events for RAD products.
1.3.6.1.4.1.164.6.1.0.1NotificationtftpStatusChangeTrapcurrentThis trap is sent whenever the status of tftp changed.
1.3.6.1.4.1.164.6.1.0.2NotificationagnStatusChangeTrapcurrentThis trap is sent whenever the state of the entity the agent is responsible for changed. TDM devices will send agnTestStatus variable to indicate the current t…
1.3.6.1.4.1.164.6.1.0.3NotificationprtStatusChangeTrapcurrentThis trap is sent whenever the state of a port changed. Attached, will be parameter/s that indicate the new port status. The attached variables will be specifi…
1.3.6.1.4.1.164.6.1.0.4NotificationswdlStatusResultcurrentThis notification is sent when Software Down Load is finished. The attached object indicates the File Name.
1.3.6.1.4.1.164.6.1.0.5NotificationintSwdlSlotFileMismatchcurrentThis notification is sent when the card in the chosen slot doesn't match the chosen file. The attached object indicates the File Name.
1.3.6.1.4.1.164.6.1.0.6NotificationagnCounterChangecurrentThis notification is sent when the value of a specific Counter is changed. Agent can send as attached object the updated Counter. For details about this Counte…
1.3.6.1.4.1.164.6.1.0.7NotificationprtClkSrcChangeTrapcurrentThis trap is sent upon any port clock change.
1.3.6.1.4.1.164.6.1.0.8NotificationmoduleFailTrapcurrentThis trap is sent upon a module failure.
1.3.6.1.4.1.164.6.1.0.9NotificationmoduleInitFailTrapcurrentThis trap is sent upon a module initialization failure.
1.3.6.1.4.1.164.6.1.0.10NotificationclkSrcChangeTrapcurrentThis trap is sent upon any change in Clock Source.
1.3.6.1.4.1.164.6.1.0.11NotificationagnUploadDataTrapcurrentThis trap is sent upon an upload data session termination. For more details see product specification.
1.3.6.1.4.1.164.6.1.0.12NotificationenrollmentTrapcurrentThis trap is a periodically trap, which sent to manager untill Agent get any response (Get or Set) from this manager.
1.3.6.1.4.1.164.6.1.0.13NotificationagnPowerFailureTrapcurrentThis trap is sent upon power failure. It is applicable for the following devices: 1. Devices having one PS unit, which sense the failure in advance, and still …
1.3.6.1.4.1.164.6.1.0.14NotificationagnFanFailureTrapcurrentThis trap is sent upon fan failure/recovery.
1.3.6.1.4.1.164.6.1.0.15NotificationagnSystemParameterChangeTrapcurrentThis trap is sent upon any change of the systemParameter value.
1.3.6.1.4.1.164.6.1.0.16NotificationagnConfigDBChecksumErrorcurrentThis trap indicates that the database currently stored in the non-volatile memory of the device is corrupted
1.3.6.1.4.1.164.6.1.0.17NotificationagnAlarmBufferOverflowcurrentThis trap indicates that the quantity of alarm messages which have been written in the alarm buffer, since the last clear command, exceeds predefined threshold…
1.3.6.1.4.1.164.6.1.0.18NotificationagnAlarmBufferClearcurrentThis trap indicates that alarm buffer has been cleared.
1.3.6.1.4.1.164.6.1.0.19NotificationagnParametersValueChangedcurrentThis trap indicates that due to software upgrade, some of the parameters are assigned new values
1.3.6.1.4.1.164.6.1.0.20NotificationagnDriverSwMismatchcurrentThere is mismatch between the SW driver and the HW of the device uplink interface.
1.3.6.1.4.1.164.6.1.0.21NotificationagnActualLowRatecurrentThe main link is synchronized at a rate lower than expected.
1.3.6.1.4.1.164.6.1.0.22NotificationxModemFileTransferStatusTrapcurrentThis trap is sent in the following cases: - When an xModem File Transfer Session begins. In this case, the trapVal.1 string sent will be: 'Start'. - When an xM…
1.3.6.1.4.1.164.6.1.0.23NotificationagnStationClkFailureTrapcurrentThis trap is sent upon Station Clock failure.
1.3.6.1.4.1.164.6.1.0.24NotificationsuccessfulLogincurrentThis trap is sent when a user performed successful Login via Terminal/Telnet/Web. This trap is used when the device is located at End-User's premises while man…
1.3.6.1.4.1.164.6.1.0.25NotificationfailedLogincurrentThis trap is sent when a user tried to Login via Terminal/Telnet/Web and failed. This trap is used when the device is located at End-User's premises while mana…
1.3.6.1.4.1.164.6.1.0.26NotificationmodlChangeTrapcurrentThis trap is sent whenever a module is inserted or removed. The trap should include the new module type (e.g. modlParamType).
1.3.6.1.4.1.164.6.1.0.27NotificationlicenseUpdateTrapcurrentThis trap is sent whenever a license is successfully downloaded or whenever a license's demo duration is expired.
1.3.6.1.4.1.164.6.1.0.28NotificationagnClkSrcStateChangeTrapcurrentThe trap is sent upon change in Recovery Clock State.
1.3.6.1.4.1.164.6.1.0.29NotificationagnSelfTestResultChangeTrapcurrentThe trap is sent upon each change in the result of a Self State operation.
1.3.6.1.4.1.164.6.1.0.31NotificationagnClkSrcFrequencyAlarmTrapcurrentThe trap is sent upon Recovered Clock Frequency alarm.
1.3.6.1.4.1.164.6.1.1NoderadSysTR
1.3.6.1.4.1.164.6.1.1.1NoderadRADring
1.3.6.1.4.1.164.6.1.1.2NoderadTMA
1.3.6.1.4.1.164.6.1.1.3NoderadRingMonitor
1.3.6.1.4.1.164.6.1.2NoderadSysFddi
1.3.6.1.4.1.164.6.1.2.1NoderadFDX100
1.3.6.1.4.1.164.6.1.3NoderadSysWan
1.3.6.1.4.1.164.6.1.3.0IdentityradSysWanEventscurrentThe events for RAD Wan products.
1.3.6.1.4.1.164.6.1.3.0.5NotificationalarmStatusTrapcurrentThe trap is sent whenever there is a transition from a no alarm state to a state with at least one active alarm.
1.3.6.1.4.1.164.6.1.3.0.6NotificationsystemTrapcurrentThis trap alerts of major problems in the device.
1.3.6.1.4.1.164.6.1.3.0.7NotificationalarmLOScurrentThis trap indicates Loss Of Signal.
1.3.6.1.4.1.164.6.1.3.0.8NotificationalarmLOFcurrentThis trap indicates Loss Of Frame.
1.3.6.1.4.1.164.6.1.3.0.9NotificationchannelOperStatusTrapcurrentThis trap is sent upon any change in one or more channels.
1.3.6.1.4.1.164.6.1.3.0.10NotificationalarmAIScurrentThis trap indicates AIS.
1.3.6.1.4.1.164.6.1.3.0.11NotificationalarmRDIcurrentThis trap indicates RDI.
1.3.6.1.4.1.164.6.1.3.0.12NotificationalarmFEBEcurrentThis trap indicates FEBE.
1.3.6.1.4.1.164.6.1.3.0.13NotificationlocalConnStatusTrapcurrentThis trap is sent upon a change in Local connectivity of Bundle connection.
1.3.6.1.4.1.164.6.1.3.0.14NotificationremoteConnStatusTrapcurrentThis trap is sent upon a change in Remote connectivity of Bundle connection.
1.3.6.1.4.1.164.6.1.3.0.15NotificationbundleConnectionStatusTrapcurrentThis trap is sent upon any change in the connectivity status of a Bundle (ip2IfOperStatus). The ifAlias index is the ifIndex of the bundle that its status has …
1.3.6.1.4.1.164.6.1.3.1NoderadMP2100
1.3.6.1.4.1.164.6.1.3.2NoderadMP2104
1.3.6.1.4.1.164.6.1.3.3NoderadMP2100B
1.3.6.1.4.1.164.6.1.3.4NoderadMP2100F
1.3.6.1.4.1.164.6.1.3.5NoderadMP2100H
1.3.6.1.4.1.164.6.1.3.6NoderadMP2104H
1.3.6.1.4.1.164.6.1.3.7NoderadMP2200B
1.3.6.1.4.1.164.6.1.3.8NoderadMP2200F
1.3.6.1.4.1.164.6.1.3.9NoderadMX3000
1.3.6.1.4.1.164.6.1.3.10NoderadMX3004
1.3.6.1.4.1.164.6.1.3.11NoderadMX30
1.3.6.1.4.1.164.6.1.3.12NoderadMX300
1.3.6.1.4.1.164.6.1.3.13NoderadVOIP
1.3.6.1.4.1.164.6.1.3.15NoderadKM2100
1.3.6.1.4.1.164.6.1.3.16NoderadKM2104
1.3.6.1.4.1.164.6.1.3.20NoderadDXC30
1.3.6.1.4.1.164.6.1.3.21NoderadDXC10A
1.3.6.1.4.1.164.6.1.3.22NoderadDXC8R
1.3.6.1.4.1.164.6.1.3.23NoderadDXC30E
1.3.6.1.4.1.164.6.1.3.24NoderadDXC3000
1.3.6.1.4.1.164.6.1.3.25NoderadDXC8RNew
1.3.6.1.4.1.164.6.1.3.26NoderadFcdT1LC
1.3.6.1.4.1.164.6.1.3.27NoderadFcdE1LC
1.3.6.1.4.1.164.6.1.3.28NoderadFcdT1L
1.3.6.1.4.1.164.6.1.3.29NoderadFcdE1L
1.3.6.1.4.1.164.6.1.3.30NoderadFcdT1
1.3.6.1.4.1.164.6.1.3.31NoderadFcdE1
1.3.6.1.4.1.164.6.1.3.32NoderadFcdE1I
1.3.6.1.4.1.164.6.1.3.33NoderadFcdT1M
1.3.6.1.4.1.164.6.1.3.34NoderadFcdE1M
1.3.6.1.4.1.164.6.1.3.35NoderadFcdIP
1.3.6.1.4.1.164.6.1.3.36NoderadFcdT1A
1.3.6.1.4.1.164.6.1.3.37NoderadFcdE1A
1.3.6.1.4.1.164.6.1.3.38NoderadFcdW
1.3.6.1.4.1.164.6.1.3.39NoderadFcdSTM
1.3.6.1.4.1.164.6.1.3.40NoderadHtuE1Sa
1.3.6.1.4.1.164.6.1.3.41NoderadHtuE1
1.3.6.1.4.1.164.6.1.3.42NoderadHtu2Sa
1.3.6.1.4.1.164.6.1.3.43NoderadHtu2
1.3.6.1.4.1.164.6.1.3.44NoderadAsmi450R768Sa
1.3.6.1.4.1.164.6.1.3.45NoderadAsmi450R768
1.3.6.1.4.1.164.6.1.3.46NoderadAsmi450R1152Sa
1.3.6.1.4.1.164.6.1.3.47NoderadAsmi450R1152
1.3.6.1.4.1.164.6.1.3.48NoderadLrs12F
1.3.6.1.4.1.164.6.1.3.49NoderadLrs12B
1.3.6.1.4.1.164.6.1.3.50NoderadLrs52
1.3.6.1.4.1.164.6.1.3.51NoderadHcdE1Sa
1.3.6.1.4.1.164.6.1.3.52NoderadHcdE1
1.3.6.1.4.1.164.6.1.3.53NoderadHtuT1Sa
1.3.6.1.4.1.164.6.1.3.54NoderadHtuT1
1.3.6.1.4.1.164.6.1.3.55NoderadOptimux4E1
1.3.6.1.4.1.164.6.1.3.56NoderadOptimux4T1
1.3.6.1.4.1.164.6.1.3.57NoderadOptimuxXLE1
1.3.6.1.4.1.164.6.1.3.58NoderadOptimuxXLT1
1.3.6.1.4.1.164.6.1.3.59NoderadOptimuxXL16E1
1.3.6.1.4.1.164.6.1.3.60NoderadImx64
1.3.6.1.4.1.164.6.1.3.61NoderadImx6L
1.3.6.1.4.1.164.6.1.3.62NoderadImx2
1.3.6.1.4.1.164.6.1.3.63NoderadImx4T1
1.3.6.1.4.1.164.6.1.3.64NoderadImx4E1
1.3.6.1.4.1.164.6.1.3.65NoderadImx2T1E1
1.3.6.1.4.1.164.6.1.3.66NoderadImxi4
1.3.6.1.4.1.164.6.1.3.67NoderadOptimux155
1.3.6.1.4.1.164.6.1.3.68NoderadOptimux4T1L
1.3.6.1.4.1.164.6.1.3.69NoderadOptimux4E1L
1.3.6.1.4.1.164.6.1.3.70NoderadHtuE1SaV2
1.3.6.1.4.1.164.6.1.3.71NoderadHtuE1V2
1.3.6.1.4.1.164.6.1.3.72NoderadFomiE3
1.3.6.1.4.1.164.6.1.3.73NoderadFomiT3
1.3.6.1.4.1.164.6.1.3.74NoderadOpt4E1C
1.3.6.1.4.1.164.6.1.3.75NoderadOpt4T1C
1.3.6.1.4.1.164.6.1.3.76NoderadPrbiE3
1.3.6.1.4.1.164.6.1.3.77NoderadPrbiT3
1.3.6.1.4.1.164.6.1.3.78NoderadHcd4Sa
1.3.6.1.4.1.164.6.1.3.79NoderadOptimuxT3
1.3.6.1.4.1.164.6.1.3.80NoderadFRmon
1.3.6.1.4.1.164.6.1.3.81NoderadIpMux4
1.3.6.1.4.1.164.6.1.3.82NoderadIpMux1
1.3.6.1.4.1.164.6.1.3.83NoderadIpMux16
1.3.6.1.4.1.164.6.1.3.84NoderadIpMux1E
1.3.6.1.4.1.164.6.1.3.85NoderadVmux2100
1.3.6.1.4.1.164.6.1.3.86NoderadMP104
1.3.6.1.4.1.164.6.1.3.87NoderadMP204
1.3.6.1.4.1.164.6.1.3.88NoderadVmux110
1.3.6.1.4.1.164.6.1.3.90NoderadFcd155
1.3.6.1.4.1.164.6.1.3.91NoderadIpMux8
1.3.6.1.4.1.164.6.1.3.92NoderadOptimux155DS3
1.3.6.1.4.1.164.6.1.3.93NoderadOptimuxT3L
1.3.6.1.4.1.164.6.1.3.94NoderadGmux2000
1.3.6.1.4.1.164.6.1.3.95NoderadOp16E1L
1.3.6.1.4.1.164.6.1.3.96NoderadOp16E1LS
1.3.6.1.4.1.164.6.1.3.97NoderadPRBm20
1.3.6.1.4.1.164.6.1.3.98NoderadPRBm22
1.3.6.1.4.1.164.6.1.3.99NoderadAsmi52A
1.3.6.1.4.1.164.6.1.3.100NoderadOpXLE1
1.3.6.1.4.1.164.6.1.3.101NoderadOpXLT1
1.3.6.1.4.1.164.6.1.3.102NoderadOpXL16E1
1.3.6.1.4.1.164.6.1.3.103NoderadOp4E1
1.3.6.1.4.1.164.6.1.3.104NoderadOp4T1
1.3.6.1.4.1.164.6.1.3.105NoderadDxc4
1.3.6.1.4.1.164.6.1.3.106NoderadIpMux11
1.3.6.1.4.1.164.6.1.3.107NoderadIpMux14
1.3.6.1.4.1.164.6.1.3.108NoderadOp1550
1.3.6.1.4.1.164.6.1.3.110NoderadFdsl101
1.3.6.1.4.1.164.6.1.3.111NoderadFdsl201
1.3.6.1.4.1.164.6.1.3.112NoderadVmux120
1.3.6.1.4.1.164.6.1.3.113NoderadVmux2200
1.3.6.1.4.1.164.6.1.3.114NoderadVmux400
1.3.6.1.4.1.164.6.1.3.115NoderadIpMux116
1.3.6.1.4.1.164.6.1.3.116NoderadOp4E1LNew
1.3.6.1.4.1.164.6.1.3.117NoderadOp4T1LNew
1.3.6.1.4.1.164.6.1.3.118NoderadFcd155E
1.3.6.1.4.1.164.6.1.3.119NoderadFcd155ES
1.3.6.1.4.1.164.6.1.3.120NoderadMP4100
1.3.6.1.4.1.164.6.1.3.121NoderadAsmi52L
1.3.6.1.4.1.164.6.1.3.122NoderadVmux210
1.3.6.1.4.1.164.6.1.3.123NoderadOp34E1
1.3.6.1.4.1.164.6.1.3.124NoderadVmux312
1.3.6.1.4.1.164.6.1.3.125NoderadVmux404
1.3.6.1.4.1.164.6.1.3.126NoderadVmux420
1.3.6.1.4.1.164.6.1.3.127NoderadIpMux12
1.3.6.1.4.1.164.6.1.3.128NoderadOptimux4E1V3dot5
1.3.6.1.4.1.164.6.1.3.129NoderadOptimux4E1Mar06
1.3.6.1.4.1.164.6.1.3.130NoderadFcd155EwAPS
1.3.6.1.4.1.164.6.1.3.131NoderadOptimux4T1Mar06
1.3.6.1.4.1.164.6.1.3.132NoderadFcd155EwAPS2pdh
1.3.6.1.4.1.164.6.1.3.133NoderadVmux320
1.3.6.1.4.1.164.6.1.3.134NoderadMP2100VoIP
1.3.6.1.4.1.164.6.1.3.135NoderadMP2104VoIP
1.3.6.1.4.1.164.6.1.3.136NoderadIpMux24
1.3.6.1.4.1.164.6.1.3.137NoderadOp4E1NG1
1.3.6.1.4.1.164.6.1.3.138NoderadOp4T1NG1
1.3.6.1.4.1.164.6.1.3.139NoderadOp25
1.3.6.1.4.1.164.6.1.3.140NoderadAsmi54
1.3.6.1.4.1.164.6.1.3.141NoderadVmux314
1.3.6.1.4.1.164.6.1.3.142NoderadFcd622
1.3.6.1.4.1.164.6.1.3.143NoderadLrs22
1.3.6.1.4.1.164.6.1.3.144NoderadUNT20E1
1.3.6.1.4.1.164.6.1.3.145NoderadIpMux2L
1.3.6.1.4.1.164.6.1.3.146NoderadUNT20Fcd
1.3.6.1.4.1.164.6.1.3.147NoderadIpMux216
1.3.6.1.4.1.164.6.1.3.148NoderadLrs102
1.3.6.1.4.1.164.6.1.3.149NoderadGmux2004
1.3.6.1.4.1.164.6.1.3.150NoderadLrs102unbal
1.3.6.1.4.1.164.6.1.3.151NoderadLrs16
1.3.6.1.4.1.164.6.1.3.152NoderadVmux405
1.3.6.1.4.1.164.6.1.3.153NoderadVmux425
1.3.6.1.4.1.164.6.1.3.154NoderadMiniCVS
1.3.6.1.4.1.164.6.1.4NoderadSysBRG
1.3.6.1.4.1.164.6.1.4.1NoderadTRE1
1.3.6.1.4.1.164.6.1.4.2NoderadTRE1D
1.3.6.1.4.1.164.6.1.4.3NoderadTRE8
1.3.6.1.4.1.164.6.1.4.4NoderadTRE8D
1.3.6.1.4.1.164.6.1.4.5NoderadMBE1
1.3.6.1.4.1.164.6.1.4.6NoderadMBE1D
1.3.6.1.4.1.164.6.1.4.7NoderadMBE8
1.3.6.1.4.1.164.6.1.4.8NoderadMBE8D
1.3.6.1.4.1.164.6.1.4.9NoderadMLBT
1.3.6.1.4.1.164.6.1.4.10NoderadFEB4DAS
1.3.6.1.4.1.164.6.1.4.11NoderadTrimBrg10
1.3.6.1.4.1.164.6.1.4.12NoderadTrimBrg16
1.3.6.1.4.1.164.6.1.4.13NoderadRRTRE8
1.3.6.1.4.1.164.6.1.4.14NoderadRRTRE8D
1.3.6.1.4.1.164.6.1.4.15NoderadRRMLBT
1.3.6.1.4.1.164.6.1.4.16NoderadRRMLBTF
1.3.6.1.4.1.164.6.1.4.17NoderadRRTRE1D
1.3.6.1.4.1.164.6.1.4.18NoderadTRERAS
1.3.6.1.4.1.164.6.1.4.19NoderadTRERASa
1.3.6.1.4.1.164.6.1.4.20NoderadMBERAS
1.3.6.1.4.1.164.6.1.4.21NoderadMBERASa
1.3.6.1.4.1.164.6.1.4.22NoderadFEB4FDX
1.3.6.1.4.1.164.6.1.4.23NoderadFEB4SAS
1.3.6.1.4.1.164.6.1.4.24NoderadRRFTBDAS
1.3.6.1.4.1.164.6.1.4.25NoderadRRFTBSAS
1.3.6.1.4.1.164.6.1.4.26NoderadFTBDAS
1.3.6.1.4.1.164.6.1.4.27NoderadFTBSAS
1.3.6.1.4.1.164.6.1.4.28NoderadFastWay100
1.3.6.1.4.1.164.6.1.5NoderadSysCnvrtr
1.3.6.1.4.1.164.6.1.5.1NoderadSTC1
1.3.6.1.4.1.164.6.1.5.3NoderadSTC2
1.3.6.1.4.1.164.6.1.5.4NoderadSTC1UDP
1.3.6.1.4.1.164.6.1.5.6NoderadSTC2UDP
1.3.6.1.4.1.164.6.1.5.10NoderadFTC1
1.3.6.1.4.1.164.6.1.5.12NoderadFTC2
1.3.6.1.4.1.164.6.1.5.13NoderadFTC1UDP
1.3.6.1.4.1.164.6.1.5.15NoderadFTC2UDP
1.3.6.1.4.1.164.6.1.5.20NoderadSEC1
1.3.6.1.4.1.164.6.1.5.22NoderadSEC2
1.3.6.1.4.1.164.6.1.5.23NoderadSEC1UDP
1.3.6.1.4.1.164.6.1.5.25NoderadSEC2UDP
1.3.6.1.4.1.164.6.1.5.30NoderadFEC1
1.3.6.1.4.1.164.6.1.5.32NoderadFEC2
1.3.6.1.4.1.164.6.1.5.33NoderadFEC1UDP
1.3.6.1.4.1.164.6.1.5.35NoderadFEC2UDP
1.3.6.1.4.1.164.6.1.5.36NoderadRIC155
1.3.6.1.4.1.164.6.1.5.37NoderadRICE1
1.3.6.1.4.1.164.6.1.5.38NoderadETX102
1.3.6.1.4.1.164.6.1.5.39NoderadRIC155GE
1.3.6.1.4.1.164.6.1.5.40NoderadRiciT3
1.3.6.1.4.1.164.6.1.5.41NoderadRiciE3
1.3.6.1.4.1.164.6.1.5.42NoderadRiciT1
1.3.6.1.4.1.164.6.1.5.43NoderadETX202
1.3.6.1.4.1.164.6.1.5.44NoderadETX105
1.3.6.1.4.1.164.6.1.5.45NoderadETX205
1.3.6.1.4.1.164.6.1.5.46NoderadRiciSE
1.3.6.1.4.1.164.6.1.5.47NoderadRIC622GE
1.3.6.1.4.1.164.6.1.5.48NoderadSPH
1.3.6.1.4.1.164.6.1.5.49NoderadMiricE1T1
1.3.6.1.4.1.164.6.1.5.50NoderadMiricE3T3
1.3.6.1.4.1.164.6.1.6NoderadEthAccess
1.3.6.1.4.1.164.6.1.6.1NoderadETX510
1.3.6.1.4.1.164.6.1.6.2NoderadEGate100
1.3.6.1.4.1.164.6.1.6.3NoderadEGate20
1.3.6.1.4.1.164.6.1.6.4NoderadRici8E1
1.3.6.1.4.1.164.6.1.6.5NoderadRici8T1
1.3.6.1.4.1.164.6.1.6.6NoderadRici4E1
1.3.6.1.4.1.164.6.1.6.7NoderadRici4T1
1.3.6.1.4.1.164.6.1.6.8NoderadIMXI4
1.3.6.1.4.1.164.6.1.6.9NoderadETX550
1.3.6.1.4.1.164.6.1.6.10NoderadRici16
1.3.6.1.4.1.164.6.1.6.11NoderadETX102A
1.3.6.1.4.1.164.6.1.6.12NoderadETX202A
1.3.6.1.4.1.164.6.1.6.13NoderadETX201A
1.3.6.1.4.1.164.6.1.6.14NoderadETX201
1.3.6.1.4.1.164.6.1.6.15NoderadUNT20Ric
1.3.6.1.4.1.164.6.1.6.16NoderadRici4E1L
1.3.6.1.4.1.164.6.1.6.17NoderadRici8E1L
1.3.6.1.4.1.164.6.1.6.18NoderadRici155GE
1.3.6.1.4.1.164.6.1.6.19NoderadRici622GE
1.3.6.1.4.1.164.6.1.6.20NoderadETX208
1.3.6.1.4.1.164.6.1.6.21NoderadETX202AW
1.3.6.1.4.1.164.6.1.6.22NoderadETX102H
1.3.6.1.4.1.164.6.1.6.23NoderadETX202H
1.3.6.1.4.1.164.6.1.7NoderadSysStkHub
1.3.6.1.4.1.164.6.1.7.1NoderadRBHE
1.3.6.1.4.1.164.6.1.7.1.0IdentityradRBHEEventscurrentThe events for RAD Stackable products.
1.3.6.1.4.1.164.6.1.7.2NoderadRBHT
1.3.6.1.4.1.164.6.1.7.2.0IdentityradRBHTEventscurrentThe events for RAD Stackable products.
1.3.6.1.4.1.164.6.1.7.3NoderadETS4fddiDAS
1.3.6.1.4.1.164.6.1.7.4NoderadETS4fddiSAS
1.3.6.1.4.1.164.6.1.7.5NoderadSAHEMX
1.3.6.1.4.1.164.6.1.7.6NoderadSAHTM
1.3.6.1.4.1.164.6.1.7.7NoderadETS4
1.3.6.1.4.1.164.6.1.7.8NoderadSAHEMU
1.3.6.1.4.1.164.6.1.7.9Nodeunknown
1.3.6.1.4.1.164.6.1.7.10NoderadSAH16Eint
1.3.6.1.4.1.164.6.1.7.11NoderadSAH16Tint
1.3.6.1.4.1.164.6.1.7.12NoderadSAH16Eext
1.3.6.1.4.1.164.6.1.7.13NoderadSAH16Text
1.3.6.1.4.1.164.6.1.8NoderadSysPS
1.3.6.1.4.1.164.6.1.8.0IdentityradSysPSEventscurrentThe events for RAD Packet Switch (PS) products.
1.3.6.1.4.1.164.6.1.8.1NoderadSPS2
1.3.6.1.4.1.164.6.1.8.2NoderadSPS3
1.3.6.1.4.1.164.6.1.8.3NoderadSPS6
1.3.6.1.4.1.164.6.1.8.4NoderadSPS9
1.3.6.1.4.1.164.6.1.8.5NoderadSPS12
1.3.6.1.4.1.164.6.1.8.6NoderadAPD2
1.3.6.1.4.1.164.6.1.8.7NoderadAPD8
1.3.6.1.4.1.164.6.1.8.8NoderadAPS8
1.3.6.1.4.1.164.6.1.8.9NoderadAPS16
1.3.6.1.4.1.164.6.1.8.10NoderadAPS24
1.3.6.1.4.1.164.6.1.8.11NoderadSPS3S
1.3.6.1.4.1.164.6.1.8.12NoderadFPS8
1.3.6.1.4.1.164.6.1.8.13NoderadFPS12
1.3.6.1.4.1.164.6.1.8.14NoderadSPS3ScSL
1.3.6.1.4.1.164.6.1.8.15NoderadSPS3Sc2S
1.3.6.1.4.1.164.6.1.8.16NoderadFPS8c
1.3.6.1.4.1.164.6.1.8.17NoderadFPS4
1.3.6.1.4.1.164.6.1.8.18NoderadSPS4
1.3.6.1.4.1.164.6.1.9NoderadSysEth
1.3.6.1.4.1.164.6.1.9.1NoderadEP8T
1.3.6.1.4.1.164.6.1.9.2NoderadEP4TAUI
1.3.6.1.4.1.164.6.1.9.3NoderadEP4T2FL
1.3.6.1.4.1.164.6.1.9.4NoderadEP4TFL
1.3.6.1.4.1.164.6.1.9.5NoderadEP4FL
1.3.6.1.4.1.164.6.1.9.7NoderadEPR8T
1.3.6.1.4.1.164.6.1.9.8NoderadEPR4TAUI
1.3.6.1.4.1.164.6.1.9.9NoderadEPR4T2FL
1.3.6.1.4.1.164.6.1.9.10NoderadEPR4TFL
1.3.6.1.4.1.164.6.1.9.11NoderadEPR4FL
1.3.6.1.4.1.164.6.1.11NoderadSysRtr
1.3.6.1.4.1.164.6.1.11.0IdentityradSysRtrEventscurrentThe events for RAD Router products.
1.3.6.1.4.1.164.6.1.11.1NoderadRTED
1.3.6.1.4.1.164.6.1.11.2NoderadRTEM
1.3.6.1.4.1.164.6.1.11.3NoderadRTEC
1.3.6.1.4.1.164.6.1.11.4NoderadWebRanger
1.3.6.1.4.1.164.6.1.11.5NoderadTinyRouter
1.3.6.1.4.1.164.6.1.11.6NoderadLA240
1.3.6.1.4.1.164.6.1.11.7NoderadSuperLan
1.3.6.1.4.1.164.6.1.11.8NoderadLA240I
1.3.6.1.4.1.164.6.1.11.9NoderadFcdIsdn
1.3.6.1.4.1.164.6.1.11.10NoderadEFcdIp
1.3.6.1.4.1.164.6.1.11.11NoderadFcdIpD
1.3.6.1.4.1.164.6.1.11.12NoderadFcdIpM
1.3.6.1.4.1.164.6.1.11.13NoderadFcdIpL
1.3.6.1.4.1.164.6.1.12NoderadSysAtm
1.3.6.1.4.1.164.6.1.12.0IdentityradSysAtmEventscurrentThe events for RAD ATM products.
1.3.6.1.4.1.164.6.1.12.0.6NotificationatmAceSystemTrapcurrentThis trap alerts of major problems in the device.
1.3.6.1.4.1.164.6.1.12.0.7NotificationatmAceAlarmForwardingTrapcurrentThis trap is sent upon starting or stopping Alarm Forwarding Mechanism.
1.3.6.1.4.1.164.6.1.12.0.8NotificationatmAceDateAndTimeRequestcurrentThis trap is sent upon restart. Upon recieving this trap the NMS will set the device's date and time. This trap's purpose is to fix a problem in ACE2002, ACE-2…
1.3.6.1.4.1.164.6.1.12.0.16NotificationatmAceAlarmLOScurrentThis trap indicates Loss Of Signal.
1.3.6.1.4.1.164.6.1.12.0.17NotificationatmAceAlarmLOFcurrentThis trap indicates Loss Of Frame.
1.3.6.1.4.1.164.6.1.12.0.18NotificationatmAceAlarmLCDcurrentThis trap indicates Loss of Cell Delineation.
1.3.6.1.4.1.164.6.1.12.0.19NotificationatmAceAlarmSLMcurrentThis trap indicates Signal Line Mismatch.
1.3.6.1.4.1.164.6.1.12.0.20NotificationatmAceAlarmLOPcurrentThis trap indicates Loss of Pointer.
1.3.6.1.4.1.164.6.1.12.0.21NotificationatmAceAlarmLineAIScurrentThis trap indicates Line AIS.
1.3.6.1.4.1.164.6.1.12.0.22NotificationatmAceAlarmPathAIScurrentThis trap indicates Path AIS.
1.3.6.1.4.1.164.6.1.12.0.23NotificationatmAceAlarmLineRDIcurrentThis trap indicates Line RDI.
1.3.6.1.4.1.164.6.1.12.0.24NotificationatmAceAlarmPathRDIcurrentThis trap indicates Path RDIand Path RAI(Yellow) for DS1 interfaces.
1.3.6.1.4.1.164.6.1.12.0.25NotificationatmAceAlarmSectionBIPcurrentThis trap indicates Section Bit Interleave Parity.
1.3.6.1.4.1.164.6.1.12.0.26NotificationatmAceAlarmLineBIPcurrentThis trap indicates Line Bit Interleave Parity.
1.3.6.1.4.1.164.6.1.12.0.27NotificationatmAceAlarmPathBIPcurrentThis trap indicates Path Bit Interleave Parity.
1.3.6.1.4.1.164.6.1.12.0.28NotificationatmAceAlarmLineFEBEcurrentThis trap indicates Line Far End Block Error.
1.3.6.1.4.1.164.6.1.12.0.29NotificationatmAceAlarmPathFEBEcurrentThis trap indicates Path Far End Block Error.
1.3.6.1.4.1.164.6.1.12.0.30NotificationatmAceAlarmPlcpLOFcurrentThis trap indicates T3 PLCP Loss Of Frame.
1.3.6.1.4.1.164.6.1.12.0.31NotificationatmAceAlarmPlcpYELLOWcurrentThis trap indicates T3 Plcp Yellow.
1.3.6.1.4.1.164.6.1.12.0.32NotificationatmAceAlarmPlcpBIPcurrentThis trap indicates T3 Plcp Bit Interleave Parity.
1.3.6.1.4.1.164.6.1.12.0.33NotificationatmAceAlarmPlcpFEBEcurrentThis trap indicates T3 Plcp Far End Block Error.
1.3.6.1.4.1.164.6.1.12.0.34NotificationatmAceAlarmPlcpP1P2currentThis trap indicates T3 Plcp Parity errors in P1/P2 bytes.
1.3.6.1.4.1.164.6.1.12.0.35NotificationatmAceAlarmUAScurrentThis trap is sent upon UAS start or end per port.
1.3.6.1.4.1.164.6.1.12.0.36NotificationatmAceAlarmClustercurrentThis trap is sent upon atmNteAlarmType start or end, for a cluster of VPs/VCs (according to atmNteLevel) with the same alarm on the same physical port. This tr…
1.3.6.1.4.1.164.6.1.12.0.37NotificationatmAceHwFailurecurrentThis trap is sent upon HW failure per port.
1.3.6.1.4.1.164.6.1.12.0.38NotificationatmAceUnavailableBwTrapcurrentThis trap is sent when Bandwidth allocation is > max possible value for the installed card. For ACE2002 this trap will be sent for the following cases: Card in…
1.3.6.1.4.1.164.6.1.12.0.40NotificationatmAceAlarmVpContinuityLosscurrentThis trap indicates Loss of Continuity Check on a VP Connection.
1.3.6.1.4.1.164.6.1.12.0.41NotificationatmAceAlarmVpAISReceptioncurrentThis trap indicates AIS Reception on a VP Connection.
1.3.6.1.4.1.164.6.1.12.0.42NotificationatmAceAlarmVpRDIReceptioncurrentThis trap indicates RDI Reception on a VP Connection.
1.3.6.1.4.1.164.6.1.12.0.43NotificationatmAceAlarmVpErroredCellscurrentThis trap indicates Errored Cells on a VP Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.44NotificationatmAceAlarmVpLostCellscurrentThis trap indicates Lost Cells on a VP Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.45NotificationatmAceAlarmVpMisinsertedCellscurrentThis trap indicates Misinserted Cells on a VP Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.46NotificationatmAceAlarmVpUAScurrentThis trap is sent upon UAS start or end per VP.
1.3.6.1.4.1.164.6.1.12.0.47NotificationatmAceAlarmVpLoopbackcurrentThis trap is sent upon OAM LoopBack fail status per VP.
1.3.6.1.4.1.164.6.1.12.0.48NotificationatmAceAlarmVpGCRAViolationcurrentThis trap indicates GCRA violation on a VP Connection reported by UPC device.
1.3.6.1.4.1.164.6.1.12.0.56NotificationatmAceAlarmVcContinuityLosscurrentThis trap indicates Loss of Continuity Check on a VC Connection.
1.3.6.1.4.1.164.6.1.12.0.57NotificationatmAceAlarmVcAISReceptioncurrentThis trap indicates AIS Reception on a VC.
1.3.6.1.4.1.164.6.1.12.0.58NotificationatmAceAlarmVcRDIReceptioncurrentThis trap indicates RDI Reception on a VC Connection.
1.3.6.1.4.1.164.6.1.12.0.59NotificationatmAceAlarmVcErroredCellscurrentThis trap indicates Errored Cells on a VC Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.60NotificationatmAceAlarmVcLostCellscurrentThis trap indicates Lost Cells on a VC Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.61NotificationatmAceAlarmVcMisinsertedCellscurrentThis trap indicates Misinserted Cells on a VC Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.62NotificationatmAceAlarmVcUnexpectedCellcurrentThis trap indicates an unexpected cell from user or network port.
1.3.6.1.4.1.164.6.1.12.0.63NotificationatmAceAlarmVcUAScurrentThis trap is sent upon UAS start or end per VC.
1.3.6.1.4.1.164.6.1.12.0.64NotificationatmAceAlarmVcLoopbackcurrentThis trap is sent upon OAM LoopBack fail status per VC.
1.3.6.1.4.1.164.6.1.12.0.65NotificationatmAceAlarmVcGCRAViolationcurrentThis trap indicates GCRA violation on a VC Connection reported by UPC device.
1.3.6.1.4.1.164.6.1.12.1NoderadStarSwitch
1.3.6.1.4.1.164.6.1.12.1.1NoderadStarSwitchATM25
1.3.6.1.4.1.164.6.1.12.1.2NoderadStarSwitchATM25L
1.3.6.1.4.1.164.6.1.12.1.3NoderadStarSwitchATM155
1.3.6.1.4.1.164.6.1.12.2NoderadAtmCsuDsu
1.3.6.1.4.1.164.6.1.12.2.1NoderadAmcdE1
1.3.6.1.4.1.164.6.1.12.2.2NoderadAmcdT1
1.3.6.1.4.1.164.6.1.12.2.3NoderadAce20E
1.3.6.1.4.1.164.6.1.12.2.4NoderadAce20T
1.3.6.1.4.1.164.6.1.12.2.5NoderadAce2005
1.3.6.1.4.1.164.6.1.12.2.6NoderadAce2002
1.3.6.1.4.1.164.6.1.12.2.7NoderadAce2002E
1.3.6.1.4.1.164.6.1.12.2.8NoderadAce2E
1.3.6.1.4.1.164.6.1.12.2.9NoderadAce2T
1.3.6.1.4.1.164.6.1.12.2.10NoderadMlAtmE1
1.3.6.1.4.1.164.6.1.12.2.11NoderadMlAtmT1
1.3.6.1.4.1.164.6.1.12.2.12NoderadAmc102
1.3.6.1.4.1.164.6.1.12.2.13NoderadAmc102c
1.3.6.1.4.1.164.6.1.12.2.14NoderadAce202
1.3.6.1.4.1.164.6.1.12.3NoderadAce
1.3.6.1.4.1.164.6.1.12.3.1NoderadAce101
1.3.6.1.4.1.164.6.1.12.3.2NoderadAce102
1.3.6.1.4.1.164.6.1.12.3.3NoderadAce50
1.3.6.1.4.1.164.6.1.12.3.4NoderadAce52
1.3.6.1.4.1.164.6.1.12.3.5NoderadAce52L
1.3.6.1.4.1.164.6.1.12.3.7NoderadAce201
1.3.6.1.4.1.164.6.1.12.3.8NoderadAce3200
1.3.6.1.4.1.164.6.1.12.3.9NoderadAce3100
1.3.6.1.4.1.164.6.1.12.3.10NoderadAce3400
1.3.6.1.4.1.164.6.1.12.3.11NoderadAce3402
1.3.6.1.4.1.164.6.1.12.3.12NoderadAce3100PSN
1.3.6.1.4.1.164.6.1.12.3.13NoderadAce3200PSN
1.3.6.1.4.1.164.6.1.12.3.14NoderadAce3400PSN
1.3.6.1.4.1.164.6.1.12.3.15NoderadAce3402PSN
1.3.6.1.4.1.164.6.1.12.3.16NoderadAce3600
1.3.6.1.4.1.164.6.1.12.3.17NoderadAce3205
1.3.6.1.4.1.164.6.1.12.3.18NoderadAce3105
1.3.6.1.4.1.164.6.1.13NoderadSysLA
1.3.6.1.4.1.164.6.1.13.1NoderadLA140
1.3.6.1.4.1.164.6.1.13.2NoderadLA110
1.3.6.1.4.1.164.6.1.13.3NoderadLA104
1.3.6.1.4.1.164.6.1.13.4NoderadLA130
1.3.6.1.4.1.164.6.1.13.5NoderadLA210
1.3.6.1.4.1.164.6.1.100NoderadSysTerminal
1.3.6.1.4.1.164.6.2Nodeagnt
1.3.6.1.4.1.164.6.2.1ScalaragnHwVersionread-writecurrentASCII string for description and display of the agent hardware version, as it is known by the agent software.The user can update the version upon request when …
1.3.6.1.4.1.164.6.2.2ScalaragnTrapMaskread-writecurrentThe value of this attribute determines the type of traps the agent should mask and not send to the management console. The value is differently determined for …
1.3.6.1.4.1.164.6.2.3ScalaragnTrapValueread-onlydeprecatedThe value of the trap decoded in internal RAD format. Full description is given in the Trap definition file
1.3.6.1.4.1.164.6.2.4ScalaragnChangeCntread-onlycurrentThe number of changes in system configuration that were reported to the manager since last cold start
1.3.6.1.4.1.164.6.2.5ScalaragnSpecificread-onlycurrentObject identifier of entity containing additional information regarding this instance.
1.3.6.1.4.1.164.6.2.6ScalaragnConfigMsgread-onlycurrentFull configuration message coded in internal RAD application format. This entry describes agent's configuration. For MP-2200 R3, this object describes agent's …
1.3.6.1.4.1.164.6.2.7TablemngTrapIpTablenot-accessiblecurrentThis table indicates the destination address of the traps. Internally it will be limited to ten addresses.
1.3.6.1.4.1.164.6.2.7.1RowmngEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.7.1.1ColumnmngIDread-onlycurrentThis value indicates an index of a specific IP address
1.3.6.1.4.1.164.6.2.7.1.2ColumnmngIPread-writecurrentThis value indicates the destination address of the traps. IP 0.0.0.0 removes the entry.
1.3.6.1.4.1.164.6.2.7.1.3ColumnmngIPMaskread-writedeprecatedThis value indicates the mask of the destination addresses of the traps.
1.3.6.1.4.1.164.6.2.7.1.4ColumnmngTrapMaskread-writecurrentThe value of this attribute determines the type of traps the agent should mask and not send to this NMS. The value is differently determined for different prod…
1.3.6.1.4.1.164.6.2.7.1.5ColumnmngAlarmTrapMaskread-writecurrentThe value of this object determines the alarm traps that the agent should mask (not send to this manager). The value is an Octet String, where each bit is assi…
1.3.6.1.4.1.164.6.2.7.1.6ColumnmngSnmpTrapUdpPortread-writecurrentThis variable enables to set the UDP port (socket) used for SNMP traps.
1.3.6.1.4.1.164.6.2.8ScalaragnIndicationread-onlycurrentAttribute describing the state of the entity the agent is responsible for. In case of a modular entity, the value of this attribute will be according to the co…
1.3.6.1.4.1.164.6.2.9ScalaragnMonitorModeCmdread-writecurrentSetting this attribute to ON, will enforce the agent to change its mode of operation to Monitor Mode
1.3.6.1.4.1.164.6.2.10ScalaragnLedread-onlycurrentThis entry specifies the LEDs status of the agent module . Each led will be represented by 4 bits where the first 2 bits (left) will specify the status : (00=N…
1.3.6.1.4.1.164.6.2.11TabletrapTablenot-accessiblecurrentThis table may include the last few traps generated by the agent, for future retrieval. The table has a limited capacity. If traps are not retrieved in proper …
1.3.6.1.4.1.164.6.2.11.1RowtrapEntrynot-accessiblecurrentAn entry in trapTable.
1.3.6.1.4.1.164.6.2.11.1.1ColumntrapIDread-onlycurrentThis object indicates an index of a specific trap. Can be used also for any trap, while trapVal is used as 'accessible-for-notify' or trapNumeric is used.
1.3.6.1.4.1.164.6.2.11.1.2ColumntrapValread-onlycurrentThis object is the actual ASCII description of the trap. It can be used also as attached variable of traps, in order to detail in explicit ASCII text, data of …
1.3.6.1.4.1.164.6.2.11.1.3ColumntrapTimeSinceOccurrenceread-onlycurrentThis object indicates the amount of time passed since the occurrence of the event that triggered this trap.
1.3.6.1.4.1.164.6.2.11.1.4ColumntrapNumericaccessible-for-notifycurrentThis object is a numeric general parameter, that can be attached to any trap. Values can be positive or negative.
1.3.6.1.4.1.164.6.2.12NodefileTransfer
1.3.6.1.4.1.164.6.2.12.1ScalarfileServerIPread-writecurrentThe IP address of the server from which the file is loaded
1.3.6.1.4.1.164.6.2.12.2ScalarfileNameread-writecurrentThe name of the file to be loaded. For protection, read returns NULL.
1.3.6.1.4.1.164.6.2.12.3ScalarfileTransCmdread-writecurrentThe command to be executed on fileName at fileServerIP.
1.3.6.1.4.1.164.6.2.12.4ScalartftpRetryTimeOutread-writecurrentGeneral Retransmission time-out value (seconds)
1.3.6.1.4.1.164.6.2.12.5ScalartftpTotalTimeOutread-writecurrentTotal Retransmission time-out value (seconds)
1.3.6.1.4.1.164.6.2.12.6ScalartftpStatusread-writecurrentStatus of tftp session. When a session ended with success, the tftpStatus should be endedOk(6). Before restarting a tftp session, the NMS should set the tftpSt…
1.3.6.1.4.1.164.6.2.12.7ScalartftpErrorread-onlycurrentThe MSB represents the standard error code. The LSB represents the private error code. 0x0000 is No Error 0x0100 is File Not Found 0x0200 is Access violation 0…
1.3.6.1.4.1.164.6.2.12.8ScalarfileTransferToSubSystemsread-writecurrentThis object represents the sub-systems the fileTransCmd refers to. It should be used when a system is divided to sub-systems and each sub-system (or part of th…
1.3.6.1.4.1.164.6.2.12.9ScalarfileNameWithinProductread-writecurrentThe file name used by the product within the product file system.
1.3.6.1.4.1.164.6.2.12.10TableintSwdlTablenot-accessiblecurrentThis parameters table is for internal Software down load. It also includes data about all files contained in the Object from which down-load is performed.
1.3.6.1.4.1.164.6.2.12.10.1RowintSwdlEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.12.10.1.1ColumnintSwdlObjIdxread-onlycurrentThe index of the object from which down-load is performed.
1.3.6.1.4.1.164.6.2.12.10.1.2ColumnintSwdlFileIdxread-onlycurrentThe index of the files included in intSwdlObjIdx. One of these files can be selected to be internally downloaded.
1.3.6.1.4.1.164.6.2.12.10.1.3ColumnintSwdlFileNameread-onlycurrentThe name of the file.
1.3.6.1.4.1.164.6.2.12.10.1.4ColumnintSwdlFileSwVerread-onlycurrentThe software version of the file.
1.3.6.1.4.1.164.6.2.12.10.1.5ColumnintSwdlSwDateread-onlycurrentThe software version date of the file.
1.3.6.1.4.1.164.6.2.12.10.1.6ColumnintSwdlSizeread-onlycurrentThe size of the file.
1.3.6.1.4.1.164.6.2.12.10.1.7ColumnintSwdlCmdread-writecurrentThe command to down-load a SW file to an object. The Agent will change the value of this MIB object to off(2) automatically, after accepting the command.
1.3.6.1.4.1.164.6.2.12.10.1.8ColumnintSwdlToSubSystemread-writecurrentThis object defines the subsystem for download. Bit='1'- APPLY to respective sub system. Bit='0'- DO NOT APPLY to respective sub system. For more details see p…
1.3.6.1.4.1.164.6.2.12.10.1.9ColumnintSwdlCardTyperead-onlycurrentThis object defines the Card type that this file is relevant for.
1.3.6.1.4.1.164.6.2.12.10.1.10ColumnintSwdlFlashIdxread-onlycurrentThe index of the flash memory this file is stored in (1 or 2) (Example: 1= The file is stored in flash No.1). ASMi52 file will always be stored in Flash No.2 (…
1.3.6.1.4.1.164.6.2.12.11TableswdlStatusTablenot-accessiblecurrentThis parameters table is for software download status. It also includes data about the files down-loaded or attempted to be down-loaded.
1.3.6.1.4.1.164.6.2.12.11.1RowswdlStatusEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.12.11.1.1ColumnswdlStatusTypeIdxread-onlycurrentThe index of the down-load type (e.g. external (1) or internal (2)).
1.3.6.1.4.1.164.6.2.12.11.1.2ColumnswdlStatusIdxread-onlycurrentThe index of the status rows.
1.3.6.1.4.1.164.6.2.12.11.1.3ColumnswdlStatusFileNameread-onlycurrentThe name of the file.
1.3.6.1.4.1.164.6.2.12.11.1.4ColumnswdlStatusSlotread-onlycurrentThe slot of the updated (or attempted to be updated) object.
1.3.6.1.4.1.164.6.2.12.11.1.5ColumnswdlStatusSubSystemread-onlycurrentThe subsystem that updated (or attempted to be updated).
1.3.6.1.4.1.164.6.2.12.11.1.6ColumnswdlStatusStatusread-onlycurrentThe status of the down load process. Value: Fail (2), OK (3), InProcess (4).
1.3.6.1.4.1.164.6.2.12.11.1.7ColumnswdlStatusTimeread-onlycurrentThis MIB parameter indicates the time SW download was finished. The format shuld be YYYY-MM-DD, hh:mm:ss
1.3.6.1.4.1.164.6.2.12.12ScalarclearDwldStatusLogread-writecurrentThis object clears the status log. Value: off(2), external(3), internal(4) The Agent will change the value of this MIB object to off(2) automatically, after ac…
1.3.6.1.4.1.164.6.2.12.13NodeautoFileTransfer
1.3.6.1.4.1.164.6.2.12.13.1TableautoFileTransferTablenot-accessiblecurrentScheduling configuration table for Agent initiated file transfer.
1.3.6.1.4.1.164.6.2.12.13.1.1RowautoFileTransferEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.12.13.1.1.1ColumnautoFileTransferTyperead-onlycurrentThis object defines the type of file to be transferred by agent.
1.3.6.1.4.1.164.6.2.12.13.1.1.2ColumnautoFileTransferServerIpread-writecurrentThis object defines the IP Address of the server to which the file is uploaded.
1.3.6.1.4.1.164.6.2.12.13.1.1.3ColumnautoFileTransferFileNameread-writecurrentThis object defines the name of the file to be uploaded.
1.3.6.1.4.1.164.6.2.12.13.1.1.4ColumnautoFileTransferSchedulingread-writecurrentThis object defines schedule for TFTP Automatic session(s) initiated by Agent, according to the value selected: now - initiate immediate single session. recurr…
1.3.6.1.4.1.164.6.2.12.13.1.1.5ColumnautoFileTransferTimeRecurrenceread-writecurrentThis object defines time reccurence interval, e.g. M can be 'every M days', 'every M hours' etc. Zero is used to indicate there's no time reccurence (0= notApp…
1.3.6.1.4.1.164.6.2.12.13.1.1.6ColumnautoFileTransferOccurrenceRecurrenceread-writecurrentThis object defines Occurrence reccurence interval, e.g N can be in 'every N alarms', 'every N log entries' etc. zero is used to indicate There's no Event Recc…
1.3.6.1.4.1.164.6.2.12.14ScalarfileTransferServerPortread-writecurrentServer Port number used for File Transfer. Applicable for SFTP. Valid values: 0..65535.
1.3.6.1.4.1.164.6.2.12.15ScalarfileTransferProtocolread-writecurrentFile Transfer protocol used.
1.3.6.1.4.1.164.6.2.13ScalarsystemResetread-writecurrentReset action to be performed on the system. - resetMapping - reset SDH/SONET mapping to default for all SDH/SONET links. - resetStandby(6) - can be used only b…
1.3.6.1.4.1.164.6.2.14NodesystemTiming
1.3.6.1.4.1.164.6.2.14.1ScalarsystemDateread-writecurrentSystem date.
1.3.6.1.4.1.164.6.2.14.2ScalarsystemTimeread-writecurrentSystem time.
1.3.6.1.4.1.164.6.2.14.3ScalarsystemTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the current error-measurement period. Same for all ports of the device.
1.3.6.1.4.1.164.6.2.14.4NodesystemNtp
1.3.6.1.4.1.164.6.2.14.4.1ScalarsystemNtpModeread-writecurrentThis variable represents the NTP Mode.
1.3.6.1.4.1.164.6.2.14.4.2ScalarsystemNtpGmtread-writecurrentThis variable represents the NTP GMT (Greenwich Mean Time), Possible values range is -12..12. For new devices/versions this variable will be in minutes.
1.3.6.1.4.1.164.6.2.14.4.3ScalarsystemNtpServerAddressTyperead-writecurrentThis variable represents the NTP Server Address Type.
1.3.6.1.4.1.164.6.2.14.4.4ScalarsystemNtpServerAddressread-writecurrentThis variable represents the NTP Server Address.
1.3.6.1.4.1.164.6.2.14.4.5ScalarsystemNtpUpdateIntervalread-writecurrentThis variable represents the NTP Update Interval, measured in seconds.
1.3.6.1.4.1.164.6.2.14.4.6ScalarsystemNtpCmdread-writecurrentThis variable represents NTP possible commands. After the Agent accepts a command, it will automatically change the value to off(2).
1.3.6.1.4.1.164.6.2.14.5TableschedXTablenot-accessiblecurrentAn Augment to the Schedule table (schedTable in DISMAN-SCHEDULE-MIB; RFC-3231).
1.3.6.1.4.1.164.6.2.14.5.1RowschedXEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.14.5.1.1ColumnschedYearread-createcurrentThe year during which the scheduled action should take place.
1.3.6.1.4.1.164.6.2.14.5.1.2ColumnschedWeekInMonthread-createcurrentThe week in month (schedMonth) during which the scheduled action should take place.
1.3.6.1.4.1.164.6.2.14.5.1.3ColumnschedParamread-createcurrentA Parameter that might be used whenever the scheduled action takes place. For summer-time schedule - This variable represents the time offset (in minutes), mea…
1.3.6.1.4.1.164.6.2.15NodesystemPort
1.3.6.1.4.1.164.6.2.15.1TablephysicalConnectorTablenot-accessiblecurrentThis table includes the connector type of ports or interfaces.
1.3.6.1.4.1.164.6.2.15.1.1RowphysicalConnectorEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.1.1.1ColumnportIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.1.1.2ColumnphysicalConnectorread-onlycurrentThe connector of the port/interface. other - none of the specified connectors none - no connector.
1.3.6.1.4.1.164.6.2.15.1.1.3ColumnportOptWaveLengthread-onlycurrentWave Length of an Optical interface/port in [nm] and specification if Laser or not. notApplicable - for non-optical ports.
1.3.6.1.4.1.164.6.2.15.1.1.4ColumnportOptModeread-onlycurrentLaser Mode of an Optical Laser interface/port. notApplicable - for non-Laser ports.
1.3.6.1.4.1.164.6.2.15.1.1.5ColumnportBalanceread-writecurrentThis object is according to the port Impedance. For T1 - always balanced. For E1 - there are different impedance values for balanced and unbalanced.
1.3.6.1.4.1.164.6.2.15.1.1.6ColumnportDdmSupportread-onlycurrentSFP (Small Form Pluggable) port -support Digital Diagnostics Monitoring.
1.3.6.1.4.1.164.6.2.15.1.1.7ColumnportMfgNameread-onlycurrent(SFP) Port Manufacturer name (Maximum - 16 characters).
1.3.6.1.4.1.164.6.2.15.1.1.8ColumnportTypicalMaxRangeread-onlycurrentMaximum range supported by SFP port, in meter units.
1.3.6.1.4.1.164.6.2.15.1.1.9ColumnphysicalConnectorStringread-onlycurrent(SFP) connector type. It can be Vendor Specific (unknown in advance). Being a string, the object is not affected by any future new connectors. This object will…
1.3.6.1.4.1.164.6.2.15.1.1.10ColumnportVendorPartNoread-onlycurrentSFP Vendor Part Number. Being a string, the object is not affected by any future new SFPs.
1.3.6.1.4.1.164.6.2.15.2NodeprtSupervisory
1.3.6.1.4.1.164.6.2.15.2.1TableprtSpTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.6.2.15.2.1.1RowprtSpEntrynot-accessiblecurrentSupervisory port parameter table.
1.3.6.1.4.1.164.6.2.15.2.1.1.1ColumnprtSupervisoryIndexread-onlycurrentThe SP port index. For some products, having modules (cards): The LS byte of the integer is the port index 1..255. The MS byte is different than 0 only if the …
1.3.6.1.4.1.164.6.2.15.2.1.1.2ColumnprtSupervisoryRateread-writecurrentThis attribute indicates the operation rate (speed) of the port. auto - automatic rate selection, by the agent.
1.3.6.1.4.1.164.6.2.15.2.1.1.3ColumnprtSupervisoryDataBitsread-writecurrentThis attribute indicates the number of data bits in an async frame
1.3.6.1.4.1.164.6.2.15.2.1.1.4ColumnprtSupervisoryParityread-writecurrentThis attribute indicates the parity mode in an async frame
1.3.6.1.4.1.164.6.2.15.2.1.1.5ColumnprtSupervisoryStopBitsread-writecurrentThis attribute indicates the parity mode in an async frame.
1.3.6.1.4.1.164.6.2.15.2.1.1.6ColumnprtSupervisoryUsageread-writecurrentThis attribute indicates the usage of the SP port.
1.3.6.1.4.1.164.6.2.15.2.1.1.7ColumnprtSupervisoryInterfaceread-writecurrentThis attribute indicates the supervisory port interface.
1.3.6.1.4.1.164.6.2.15.2.1.1.8ColumnprtSupervisoryCTSread-writecurrentCTS line state.
1.3.6.1.4.1.164.6.2.15.2.1.1.9ColumnprtSupervisoryDcdDelayread-writecurrentDCD delay in msec.
1.3.6.1.4.1.164.6.2.15.2.1.1.10ColumnprtSupervisoryDSRread-writecurrentDSR line state.
1.3.6.1.4.1.164.6.2.15.2.1.1.11ColumnprtSupervisoryRoutProtocolread-writecurrentThis attribute indicates the routing protocol of the port. notApplicable - for DP.
1.3.6.1.4.1.164.6.2.15.3NodeprtPerformance
1.3.6.1.4.1.164.6.2.15.3.1TableprtPerfTablenot-accessiblecurrentThis table includes G.826 ports or interfaces.
1.3.6.1.4.1.164.6.2.15.3.1.1RowprtPerfEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.3.1.1.1ColumnprtPerfIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.3.1.1.2ColumnprtPerfPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 5 objects refer to. currentPeriod - the period since last prtPerfSaveAndResetCmd received…
1.3.6.1.4.1.164.6.2.15.3.1.1.3ColumnprtPerfElapsedTimeread-onlycurrentElapsed Time in seconds. - for prtPerfPeriodRef=currentPeriod: The period since last prtPerfSaveAndResetCmd received or since Start-up (if no prtPerfSaveAndRes…
1.3.6.1.4.1.164.6.2.15.3.1.1.4ColumnprtPerfUASread-onlycurrentNumber of Unavailable Seconds for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.5ColumnprtPerfESread-onlycurrentNumber of Errored Seconds for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.6ColumnprtPerfSESread-onlycurrentNumber of Severely Errored Seconds for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.7ColumnprtPerfBBEread-onlycurrentNumber of Background Block (or Frame) Errors for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.8ColumnprtPerfBlocksPerSecread-onlycurrentBlocks per second (or frames per second) of the port/interface indicated by portIdx. This object is constant for a certain port/interface. It is not affected b…
1.3.6.1.4.1.164.6.2.15.3.1.1.9ColumnprtPerfTimeTagread-onlycurrentTime Tag of Last Period: sysUpTime when last prtPerfSaveAndResetCmd was executed. This object is applicable only for prtPerfPeriodRef=lastPeriod. For prtPerfPe…
1.3.6.1.4.1.164.6.2.15.3.1.1.10ColumnprtPerfSaveAndResetCmdread-writecurrentA command per port/interface, to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. This object is applica…
1.3.6.1.4.1.164.6.2.15.4NodeprtTest
1.3.6.1.4.1.164.6.2.15.4.1TableprtTestTablenot-accessiblecurrentThis table includes test data for ports or interfaces.
1.3.6.1.4.1.164.6.2.15.4.1.1RowprtTestEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.4.1.1.1ColumnprtTestIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.4.1.1.2ColumnprtTestCmdAndStatusread-writecurrentSetting this object to a value as detailed further on (except 0) will initiate a test on the specific port. The test/s requested will be set according to the r…
1.3.6.1.4.1.164.6.2.15.4.1.1.3ColumnprtBertCounterread-onlycurrentThis object indicates the number of BERT errors encountered during the BERT operation. It is valid only when BERT (Bit Error Rate Test) is active on the specif…
1.3.6.1.4.1.164.6.2.15.4.1.1.4ColumnprtTestInitiatorread-onlycurrentThis object indicates who initiated this port's test/s.
1.3.6.1.4.1.164.6.2.15.4.1.1.5ColumnprtTestTimeoutread-writecurrentThis object is applicable only when a single test is running. It indicates the test activation timeout in minutes. For RICi-E1T1, RICi-E3T3 the measurement uni…
1.3.6.1.4.1.164.6.2.15.4.1.1.6ColumnprtTestVctRxResultread-onlycurrentThis object indicates the result of the Vct on the cable connected to the RX connector.
1.3.6.1.4.1.164.6.2.15.4.1.1.7ColumnprtTestVctTxResultread-onlycurrentThis object indicates the result of the Vct on the cable connected to the TX connector.
1.3.6.1.4.1.164.6.2.15.4.1.1.8ColumnprtTestVctRxDistanceread-onlycurrentThis object indicates the distance in Meters to the RX cable Open/ Short location discovered by the Vct. This parameter is applicable for Vct Result = Normal o…
1.3.6.1.4.1.164.6.2.15.4.1.1.9ColumnprtTestVctTxDistanceread-onlycurrentThis object indicates the distance in Meters to the TX cable Open/ Short location discovered by the Vct. This parameter is applicable for Vct Result = Normal o…
1.3.6.1.4.1.164.6.2.15.4.1.1.10ColumnprtTestVctCmdread-writecurrentVct command. on (3) = Start Vct on both cables connected to RX and TX connectors of this port. Agent will perform the required command and change automatically…
1.3.6.1.4.1.164.6.2.15.4.1.1.11ColumnprtTestVctRxCrossPairread-onlycurrentThis object should be equal to the Index (prtTestIdx) of the Rx cross pair. This object is applicable only for Vct Result = shortToCrossPair or coupleWithCross…
1.3.6.1.4.1.164.6.2.15.4.1.1.12ColumnprtTestVctTxCrossPairread-onlycurrentThis object should be equal to the Index (prtTestIdx) of the Tx cross pair. This object is applicable only for Vct Result = shortToCrossPair or coupleWithCross…
1.3.6.1.4.1.164.6.2.15.4.1.1.13ColumnprtTestActivationDelayread-writecurrentThis object is applicable only when a single test is running. It indicates test activation delay in seconds. A Value of 0 indicates that the test starts immedi…
1.3.6.1.4.1.164.6.2.15.4.1.1.14ColumnprtTestMacSwapLoopDataModeread-writecurrentThis object defines which part of the data will be looped back.
1.3.6.1.4.1.164.6.2.15.4.1.1.15ColumnprtTestMacSwapLoopVlanIdread-writecurrentThis object specifies the VLAN ID for prtTestMacSwapLoopDataMode=specificVlan.
1.3.6.1.4.1.164.6.2.15.4.1.1.16ColumnprtTestMacSwapLoopDirectionread-writecurrentThis object defines the direction of the performed loopback. In ETX102 'local' corresponds to Ingress loop (either on User port or on Network port), and 'remot…
1.3.6.1.4.1.164.6.2.15.4.1.1.17ColumnprtTestMacSwapLoopDestAddrread-writecurrentConfigures the MAC address that will be sent in the Destination field of the packet in the outgoing direction.
1.3.6.1.4.1.164.6.2.15.4.1.1.18ColumnprtTestMacSwapLoopSrcAddrread-writecurrentConfigures the MAC address that will be sent in the Source field of the packet in the outgoing direction.
1.3.6.1.4.1.164.6.2.15.4.1.1.19ColumnprtTestOamMinRoundTripDelayread-onlycurrentThe mininal value of round trip delay of loopback message for a session of OAM loopback.Units are msec.
1.3.6.1.4.1.164.6.2.15.4.1.1.20ColumnprtTestOamMaxRoundTripDelayread-onlycurrentThe maximum value of round trip delay of loopback message for a session of OAM loopback.Units are msec.
1.3.6.1.4.1.164.6.2.15.4.1.1.21ColumnprtTestOamAvgRoundTripDelayread-onlycurrentThe average round trip delay of loopback message for a session of OAM loopback.Units are msec.
1.3.6.1.4.1.164.6.2.15.4.1.1.22ColumnprtTestOamTxIntervalread-writecurrentIndicates the interval between loopback sent messages.Units are msec.
1.3.6.1.4.1.164.6.2.15.4.1.1.23ColumnprtTestDestinationIpAddressread-writecurrentIndicates the destination IP Address in the transmitted messages that are looped back.
1.3.6.1.4.1.164.6.2.15.4.1.1.24ColumnprtTestTTLread-writecurrentTime-to-live.Number of hops the loopback message will go through the net before deciding to discard it.
1.3.6.1.4.1.164.6.2.15.4.1.1.25ColumnprtTestBwProfileread-writecurrentIndicates the BW profile (from bwProfileTable) that is assigned to the loopback test in order to limit the traffic that is looped back.
1.3.6.1.4.1.164.6.2.15.5NodeprtParam
1.3.6.1.4.1.164.6.2.15.5.1TableprtParamTablenot-accessiblecurrentThis table includes general port parameters. The meaning is different for every product that supports it due to a general parameter - prtControlCnfg. For ACE20…
1.3.6.1.4.1.164.6.2.15.5.1.1RowprtParamEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.5.1.1.1ColumnprtParamIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.5.1.1.2ColumnprtControlCnfgread-writecurrentThis object may be used for port RW general parameter/s. For detailed meaning, see product's spec. Supported by: PRBi-E3/T3. For ACE2002: This parameter will i…
1.3.6.1.4.1.164.6.2.15.5.1.1.3ColumnprtParamClkSrcread-writecurrentThe source of Transmit Clock. 'loopTiming' or 'loopback' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' or 'internal' …
1.3.6.1.4.1.164.6.2.15.5.1.1.4ColumnprtParamPhantomread-writecurrentPower feeding to another device.
1.3.6.1.4.1.164.6.2.15.5.1.1.5ColumnprtParamResetStatsCmdread-writecurrentReset statistics of the selected port.
1.3.6.1.4.1.164.6.2.15.5.1.1.6ColumnprtParamLastResetStatsTimeread-onlycurrentThe value of MIB II's sysUpTime object at the last time that prtParamResetStatsCmd was Set to on(3) for this port. If prtParamResetStatsCmd was never Set to on…
1.3.6.1.4.1.164.6.2.15.5.1.1.7ColumnprtParamInterfaceTyperead-writecurrentThe type of the port.
1.3.6.1.4.1.164.6.2.15.5.1.1.8ColumnprtParamClearAlarmread-writecurrentSetting this attribute to ON, will enforce a clear operation on the Port Alarms. Upon completion, the value will automatically change to off(2).
1.3.6.1.4.1.164.6.2.15.5.1.1.9ColumnprtParamLedsread-onlycurrentThis entry specifies the LEDs status of the port. Each led is represented by 4 bits where the first 2 bits (left) specify the status : (00=NA, 01=OFF, 10=ON, 1…
1.3.6.1.4.1.164.6.2.15.5.1.1.10ColumnprtParamLineLengthread-writecurrentLine Length of the line connected to this port.
1.3.6.1.4.1.164.6.2.15.5.1.1.11ColumnprtParamUsageread-writecurrentDefines whether this port works as User port or as Network port.
1.3.6.1.4.1.164.6.2.15.5.1.1.12ColumnprtParamMappingModeread-writecurrentThis object defines path protection on SONET/SDH link Auto - SONET/SDH mapping for port is copied automatically to same TU on the redundant SONET/SDH local (re…
1.3.6.1.4.1.164.6.2.15.5.1.1.13ColumnprtParamAlarmIndicationread-onlycurrentThis object indicates status-aggregation of non-masked alarms associated with all interface layers, related to this physical port. When at least one non-masked…
1.3.6.1.4.1.164.6.2.15.5.1.1.14ColumnprtParamClkQualityLevelread-onlycurrentThis parameter indicates quality level of clock signal. Quality is encoded according to SSM (Synchronization Status Messages) encoding. Bits 8 -5 of byte are e…
1.3.6.1.4.1.164.6.2.15.5.1.1.15ColumnprtParamClkWaveShaperead-writecurrentWave shape of station clock source signal.
1.3.6.1.4.1.164.6.2.15.5.1.1.16ColumnprtParamStatusread-onlycurrentStation clock source Status.
1.3.6.1.4.1.164.6.2.15.5.1.1.17ColumnprtParamSignalLevelread-onlycurrentThis object indicates signal level (in thenth of dB units) on selected port.
1.3.6.1.4.1.164.6.2.15.5.1.1.18ColumnprtParamClkUserQualityLevelread-writecurrentThis parameter allows user to mark quality level of clock. Quality is encoded according to SSM (Synchronization Status Messages) encoding. Bits 8 -5 of byte ar…
1.3.6.1.4.1.164.6.2.15.5.1.1.19ColumnprtParamDataRateread-writecurrentRate of serial data port (V.11, V.24, V.35) in kbps units.
1.3.6.1.4.1.164.6.2.15.5.1.1.20ColumnprtParamLoopDetectread-writecurrentEnable/disable Loop Detection on a port. Examples of ports: physical, Channelized Bundle over TDM Uplink, Bridge Ports.
1.3.6.1.4.1.164.6.2.15.5.1.1.21ColumnprtParamActUponLoopDetectread-writecurrentThis parameter is used to indicate which actions should be taken in case a loop is detected in the network the port is part of. Each action is represented by a…
1.3.6.1.4.1.164.6.2.15.5.1.1.22ColumnprtParamPSNLayerread-writecurrentThis object indicates the network layer from which clock is derived.
1.3.6.1.4.1.164.6.2.15.5.1.1.23ColumnprtParamRxSsmread-writecurrentThis object indicates if Station Clock SSM messages received will serve as criteria for clock selection.
1.3.6.1.4.1.164.6.2.15.5.1.1.24ColumnprtParamClkSsmRxSourceread-writecurrentThis object indicates the Sa-bit of the E1 frame, in which SSM messages are carried.
1.3.6.1.4.1.164.6.2.15.5.1.1.26ColumnprtParamFarEndDeviceread-writecurrentProgrammed Far-End device connected to this port. This object is relevant for products having multiple DBs. It will enable configuring offline, the relevant da…
1.3.6.1.4.1.164.6.2.15.5.1.1.27ColumnprtParamTxClkread-writecurrentenable/disable station clock signal output.
1.3.6.1.4.1.164.6.2.15.6NodeprtIP
1.3.6.1.4.1.164.6.2.15.6.1TableprtIpParamTablenot-accessiblecurrentA table - Parameters for IP Ports.
1.3.6.1.4.1.164.6.2.15.6.1.1RowprtIpParamEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.6.1.1.1ColumnprtIpParamConfigIdxread-onlycurrentThis object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). For products having Agent and Edit configuratio…
1.3.6.1.4.1.164.6.2.15.6.1.1.2ColumnprtIpParamSlotIdxread-onlycurrentThis object indicates a unique number of the slot position in which the module is inserted. notApplicable = 255 (for products that don't have slots). For KM: k…
1.3.6.1.4.1.164.6.2.15.6.1.1.3ColumnprtIpParamIdxread-onlycurrentThis object indicates a unique Port Index.
1.3.6.1.4.1.164.6.2.15.6.1.1.4ColumnprtIpParamHostIPread-writecurrentThe host interface IP address.
1.3.6.1.4.1.164.6.2.15.6.1.1.5ColumnprtIpParamHostMaskread-writecurrentThe host interface subnet mask.
1.3.6.1.4.1.164.6.2.15.6.1.1.6ColumnprtIpParamDefaultGatewayread-writecurrentDefault Gateway's IP Address.
1.3.6.1.4.1.164.6.2.15.6.1.1.7ColumnprtIpParamMediaModeread-onlycurrentThis object indicates the real Media Mode.
1.3.6.1.4.1.164.6.2.15.6.1.1.8ColumnprtIpParamMediaRateread-onlycurrentThis object indicates the real Media Rate (Mbps).
1.3.6.1.4.1.164.6.2.15.6.1.1.9ColumnprtIpParamMngVlanSupportread-writecurrentManagement VLAN support (Tagging). no - No support of VLAN Tagging. yes - 4 VLAN bytes will be added to the frame.
1.3.6.1.4.1.164.6.2.15.6.1.1.10ColumnprtIpParamMngVlanIdread-writecurrentManagement VLAN ID.
1.3.6.1.4.1.164.6.2.15.6.1.1.11ColumnprtIpParamMngVlanPriorityread-writecurrentManagement VLAN Frame priority.
1.3.6.1.4.1.164.6.2.15.6.1.1.12ColumnprtIpParamRingModeread-writecurrentThis object indicates If Ring Mode is enabled or not.
1.3.6.1.4.1.164.6.2.15.6.1.1.13ColumnprtIpParamProtIpEnableread-writecurrentThis object indicates whether a list of Protected IP Addresses is enabled or not. This object is applicable only if prtIpParamRingMode=enable.
1.3.6.1.4.1.164.6.2.15.6.1.1.14ColumnprtIpParamTrafficPriorityread-writecurrentThis object indicates the traffic priority of this port.
1.3.6.1.4.1.164.6.2.15.6.1.1.15ColumnprtIpParamRemoteIPread-writecurrentThis is the IP Address of the remote device that is connected to the current device (Point to Point Application). It is used for sending OAM packets on the LAN…
1.3.6.1.4.1.164.6.2.15.6.1.1.16ColumnprtIpParamMaxTxBandwidthread-writecurrentThis object shows the Max Bandwidth allowed on the LAN. Full - means that a Maximum of 100 Mega Byte Rate may go through the LAN. e1(3) means that the maximum …
1.3.6.1.4.1.164.6.2.15.6.1.1.17ColumnprtIpParamTosread-writecurrentTOS = Type of Service transmitted. Valid values: 0..255.
1.3.6.1.4.1.164.6.2.15.6.1.1.18ColumnprtIpParamConnectread-writecurrentPort Connection.
1.3.6.1.4.1.164.6.2.15.6.1.1.19ColumnprtIpParamAgingTimeread-writecurrentAging Time in seconds.
1.3.6.1.4.1.164.6.2.15.6.1.1.20ColumnprtIpParamEncapsulationProtread-writecurrentEncapsulation Protocol.
1.3.6.1.4.1.164.6.2.15.6.1.1.21ColumnprtIpParamEncapProtPortread-writecurrentEncapsulation Protocol Port (TCP/UDP Port).
1.3.6.1.4.1.164.6.2.15.6.1.1.22ColumnprtIpParamVlanSupportread-writecurrentVLAN support (Tagging). 'no' - No support of VLAN Tagging. 'yes' - 4 VLAN bytes will be added to the frame.
1.3.6.1.4.1.164.6.2.15.6.1.1.23ColumnprtIpParamVlanIdread-writecurrentVLAN Identifier.
1.3.6.1.4.1.164.6.2.15.6.1.1.24ColumnprtIpParamVlanPriorityread-writecurrentVLAN Frame priority.
1.3.6.1.4.1.164.6.2.15.6.1.1.25ColumnprtIpParamDoubleTagVlanIdread-writecurrentVLAN Identifier of the Double Tagging VLAN.
1.3.6.1.4.1.164.6.2.15.6.1.1.26ColumnprtIpParamDoubleTagVlanPriorityread-writecurrentVLAN Frame priority of the Double Tagging VLAN.
1.3.6.1.4.1.164.6.2.15.6.1.1.27ColumnprtIpParamVlanTaggingread-writecurrentVLAN Tagging. 'unmodified' - No change will be done to the Frame. 'tag' - Add Tag to Untagged Frames. 'doubleTag' - Add Tag to all Frames. 'doubleTagAndFallBac…
1.3.6.1.4.1.164.6.2.15.6.1.1.28ColumnprtIpParamRateLimitread-writecurrentThe maximum rate permitted to transfer via this port, in Kbps.
1.3.6.1.4.1.164.6.2.15.6.1.1.29ColumnprtIpParamDefInterfaceread-writecurrentThe Default Interface for packets with unresolved destination subnet. For internal-X port: 100 + X .
1.3.6.1.4.1.164.6.2.15.6.1.1.30ColumnprtIpParamMngread-writecurrentThis object indicates whether Management is enabled/disabled via this port.
1.3.6.1.4.1.164.6.2.15.6.1.1.31ColumnprtIpParamFloodedRateLimitread-writecurrentThe maximum rate permitted to transfer broadcast, multicast, and unicast flooded frames via this port, in Kbps. 0 - Disable. In Ipmux14 this parameter is appli…
1.3.6.1.4.1.164.6.2.15.6.1.1.32ColumnprtIpParamBurstSizeread-writecurrentThe burst size that the port can support beyond rate limitation determined in prtIpParamRateLimit. Burst Size is measured in bytes.
1.3.6.1.4.1.164.6.2.15.6.1.1.33ColumnprtIpParamLimitPacketTyperead-writecurrentThe packet type that will be rate limited. Rate limitation determined in prtIpParamRateLimit. all - All packet types are rate limited. broadMultiFloodedUnicast…
1.3.6.1.4.1.164.6.2.15.6.1.1.34ColumnprtIpParamKeepAliveIntervalread-writecurrentThis parameter indicates the period of time (in msec.) between two consequent Keep Alive messages.
1.3.6.1.4.1.164.6.2.15.6.1.1.35ColumnprtIpParamKeepAliveThreshread-writecurrentThis parameter indicates the maximum number of missed Keep Alive answer messages acceptable, after which link status will be failed.
1.3.6.1.4.1.164.6.2.15.6.1.1.36ColumnprtIpParamP2pKeepAliveVlanIdread-writecurrentDedicated VLAN ID for keep alive messages.
1.3.6.1.4.1.164.6.2.15.6.1.1.37ColumnprtIpParamP2pKeepAliveVlanPrioread-writecurrentVLAN priority for P2P keep alive messages .
1.3.6.1.4.1.164.6.2.15.6.1.1.38ColumnprtIpParamRingAdjacentMacAddrread-onlycurrentThe MAC address of the adjacent NE connected to this port in an ETH ring. If the port is not a member of a ring, the value of this parameter will be 00-00-00-0…
1.3.6.1.4.1.164.6.2.15.7NodeprtClkSrc
1.3.6.1.4.1.164.6.2.15.7.1TableprtClkSrcTablenot-accessiblecurrentA table - Parameters for master and fallback clock source of ports .
1.3.6.1.4.1.164.6.2.15.7.1.1RowprtClkSrcEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.7.1.1.1ColumnprtClkSrcCnfgIdxnot-accessiblecurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.6.2.15.7.1.1.2ColumnprtClkSrcPrtIdxnot-accessiblecurrentThis object indicates a unique Port Index (receiving clock). Refer to device specification for port Index
1.3.6.1.4.1.164.6.2.15.7.1.1.3ColumnprtClkSrcIdxnot-accessiblecurrentAn index in the table. master - refers Master clock parameters fallback - refers Fallback clock parameters
1.3.6.1.4.1.164.6.2.15.7.1.1.4ColumnprtClkSrcModeread-writecurrentThis entry indicates the source the nodal timing is locked to.
1.3.6.1.4.1.164.6.2.15.7.1.1.5ColumnprtClkSrcPrtread-writecurrentThis entry is valid only when working in rxClk mode. It specifies the port from which the clock willl be taken. Refer to device specification for source port I…
1.3.6.1.4.1.164.6.2.15.8NodeopticalPort
1.3.6.1.4.1.164.6.2.15.8.1TableoptPrtMonitorTablenot-accessiblecurrentA table - optical port (e.g SFP) monitoring parameters, according to SFF-8472 Specification for Diagnostic Monitoring Interface for Optical Xcvrs. and ITU-T re…
1.3.6.1.4.1.164.6.2.15.8.1.1RowoptPrtMonitorEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.8.1.1.1ColumnoptPrtMonitorPrtIdxnot-accessiblecurrentThis object indicates a unique (optical) Port Index . Refer to device specification for port Index.
1.3.6.1.4.1.164.6.2.15.8.1.1.2ColumnoptPrtMonitorSamplenot-accessiblecurrentThis index indicates historic and current values - minimum, maximum and actual (current) value.
1.3.6.1.4.1.164.6.2.15.8.1.1.3ColumnoptPrtMonitorTxPowerread-onlycurrentTransmitted optical power level. Value is given in units of hundredth (1/100) of dBm.
1.3.6.1.4.1.164.6.2.15.8.1.1.4ColumnoptPrtMonitorLaserBiasread-onlycurrentLASER bias current level. Value is given in units of microAmper (uA).
1.3.6.1.4.1.164.6.2.15.8.1.1.5ColumnoptPrtMonitorLaserTempread-onlycurrentLASER temperature level, in hundredth (1/100) (C) degrees.
1.3.6.1.4.1.164.6.2.15.8.1.1.6ColumnoptPrtMonitorRxPowerread-onlycurrentReceived optical power in units of hundredth (1/100) of dBm.
1.3.6.1.4.1.164.6.2.15.8.1.1.7ColumnoptPrtMonitorSupplyVoltageread-onlycurrentSupply voltage, in hundredth (1/100) of volts (V).
1.3.6.1.4.1.164.6.2.15.8.2TableoptPrtCnfgTablenot-accessiblecurrentA table - optical port configuration
1.3.6.1.4.1.164.6.2.15.8.2.1RowoptPrtCnfgEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.8.2.1.1ColumnoptPrtCnfgIdxnot-accessiblecurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.x.
1.3.6.1.4.1.164.6.2.15.8.2.1.2ColumnoptPrtCnfgPrtIdxnot-accessiblecurrentThis object indicates a unique (optical) Port Index . Refer to device specification for port Index.
1.3.6.1.4.1.164.6.2.15.8.2.1.3ColumnoptPrtCnfgALSread-writecurrentenable/disable Automatic Laser Shutdown
1.3.6.1.4.1.164.6.2.16ScalarsystemResetAllStatsCmdread-writecurrentReset statistics of all ports and connections of the device.
1.3.6.1.4.1.164.6.2.17ScalarsystemClearTablesCmdread-writecurrenttempCnfgTables - Set *RowStatus = destroy for all entries of some tables having *RowStatus object, for temporary configuration only! (255). For the relevant ta…
1.3.6.1.4.1.164.6.2.18ScalarsystemParameterread-writecurrentThis parameter can be used for different purposes: - TELNET session time-out in seconds. - Ace20: when trying to create row in a table that already has row wit…
1.3.6.1.4.1.164.6.2.19ScalaragnGlobalAlarmMaskread-writecurrentThe value of this attribute determines the alarm traps the agent should mask and not send to the managers. Each bit from a certain octet represents a certain a…
1.3.6.1.4.1.164.6.2.20ScalaralarmSeverityread-onlycurrentThis object specifies the severity of the alarms.
1.3.6.1.4.1.164.6.2.21ScalaralarmStateread-onlycurrent.
1.3.6.1.4.1.164.6.2.22ScalaragnTestStatusread-onlycurrentIndicates the current test status (for all levels: system, card, port). This attribute will be set to: on(3): when there is at least one test in progress on th…
1.3.6.1.4.1.164.6.2.23ScalarsystemSaveAndResetAllStatsCmdread-writecurrenton - a command to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. off - agent will automatically change…
1.3.6.1.4.1.164.6.2.24ScalarsystemDefaultGatewayread-writecurrentDefault Gateway's IP Address.
1.3.6.1.4.1.164.6.2.25TablesystemPsTablenot-accessiblecurrentThis table describes the PS types of a device. Usage of this table is specified in the device's NMS SRS
1.3.6.1.4.1.164.6.2.25.1RowsystemPsEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.25.1.1ColumnsystemPsIndex1read-onlycurrentFirst Index. In HUBs: 1 = PS-A slot 2 = PS-B slot 3 = PS-C slot. In SA units: 1 = PS1 2 = PS2 Default = 1
1.3.6.1.4.1.164.6.2.25.1.2ColumnsystemPsIndex2read-onlycurrentSecond Index. In HUBs: 1 always. In SA units: 1 = Local 2 = Remote Default = 1.
1.3.6.1.4.1.164.6.2.25.1.3ColumnsystemPsTyperead-onlycurrentThe type of PS, for a stand-alone product. acDc - PS that supports both AC and DC. acPF - Power Feeding (phantom) box that is feeding another box by external A…
1.3.6.1.4.1.164.6.2.25.1.4ColumnsystemPsStatusread-onlycurrentThe Status of the PS unit.
1.3.6.1.4.1.164.6.2.25.1.5ColumnsystemPsHotSwapread-onlycurrentIs PS unit hot swap or fixed.
1.3.6.1.4.1.164.6.2.26ScalaragnFansread-onlycurrentThis entry specifies the FANs existence and status. Each fan will be represented by 2 bits, where the first bit (right) will specify the existence: (0= Not exi…
1.3.6.1.4.1.164.6.2.27ScalaragnSendTrapParameterread-writecurrentThis object specifies if the agent will attach a specific parameter to a trap. For ACE2002 the agent will attach or not the openViewSeverity parameter accordin…
1.3.6.1.4.1.164.6.2.28ScalaragnSensorsStatusread-onlycurrentThis entry specifies the Sensors (Temperature sensors or others) existence and status. Each sensor will be represented by 2 bits, where the first bit (right) w…
1.3.6.1.4.1.164.6.2.29ScalaragnStationClockCardread-onlycurrentThis entry specifies the station clock card existence and status. notExist - station clock card (piggy) does not exist. notValid - station clock card exists bu…
1.3.6.1.4.1.164.6.2.30ScalarxcIndexNextread-onlycurrentThis object contains an appropriate value to be used for xcIndex when creating entries in the xcTable. The value 0 indicates that no unassigned entries are ava…
1.3.6.1.4.1.164.6.2.31TablexcTablenot-accessiblecurrentConfiguration of system cross-connect entries. The table follows the behavior described in RFC 2515, RFC 1604 regarding the creation deletion and modification …
1.3.6.1.4.1.164.6.2.31.1RowxcEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.31.1.1ColumnxcIndexnot-accessiblecurrentCross Connect Identifier.
1.3.6.1.4.1.164.6.2.31.1.2ColumnxcIfIndex1not-accessiblecurrentThe interface Index from the ifTable, which identify one side of the connection.
1.3.6.1.4.1.164.6.2.31.1.3ColumnxcVpinot-accessiblecurrentThe VPI value.
1.3.6.1.4.1.164.6.2.31.1.4ColumnxcVcinot-accessiblecurrentThe VCI value.
1.3.6.1.4.1.164.6.2.31.1.5ColumnxcIfIndex2not-accessiblecurrentThe interface Index from the ifTable, which identifies the other side of the connection.
1.3.6.1.4.1.164.6.2.31.1.6ColumnxcRowStatusread-createcurrentThis parameter allows NMS to create/delete entries of this table.
1.3.6.1.4.1.164.6.2.31.1.7ColumnxcDescrread-createcurrentA textual string containing information about the xc entry.
1.3.6.1.4.1.164.6.2.31.1.8ColumnxcAdminStatusread-createcurrentThe desired administrative status of this bi-directional cross-connect.
1.3.6.1.4.1.164.6.2.31.1.9ColumnxcOperStatusread-onlycurrentThe operational status of this bi-directional cross-connect.
1.3.6.1.4.1.164.6.2.31.1.10ColumnxcAttachedIfTyperead-onlycurrentThis object indicates if the specific VCC is already attached to any interface, and indicates the type of the interface. This object's purpose is to ease the c…
1.3.6.1.4.1.164.6.2.31.1.11ColumnxcInputPriorityread-createcurrentThis object is the priority, by which the LAN frames will be internaly sent to the ATM HW. This parameter is applicable if atmNteMdlInputPriorityMechanism=enab…
1.3.6.1.4.1.164.6.2.31.1.12ColumnxcBitMappingread-onlycurrentThis object maps this entry to a bit of an octet string. For ACE2002 this object maps the LAN VCC to the bit of the VLAN Port Lists. If the value is '0' then i…
1.3.6.1.4.1.164.6.2.32NodesystemModule
1.3.6.1.4.1.164.6.2.32.1NodemodlParam
1.3.6.1.4.1.164.6.2.32.1.1TablemodlParamTablenot-accessiblecurrentThis table include parameters for system modules.
1.3.6.1.4.1.164.6.2.32.1.1.1RowmodlParamEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.32.1.1.1.1ColumnmodlParamIndexread-onlycurrentThe module index. The index can be the slot number or any other module index as described in the specifications of the device. For Vmux-2100 device, the index …
1.3.6.1.4.1.164.6.2.32.1.1.1.2ColumnmodlParamResetread-writecurrentReset action to be performed on the module. Set the parameter will be done always to on(3) or factory (4). After performing the Reset operation, Agent will aut…
1.3.6.1.4.1.164.6.2.32.1.1.1.3ColumnmodlParamSwdlStatusread-onlycurrentThis parameter indicates whatever the swdl is in process or not.
1.3.6.1.4.1.164.6.2.32.1.1.1.4ColumnmodlParamLedsread-onlycurrentThis entry specifies the LEDs status of the module. Each led is represented by 4 bits where the first 2 bits (left) specify the status : (00=NA, 01=OFF, 10=ON,…
1.3.6.1.4.1.164.6.2.32.1.1.1.5ColumnmodlParamTyperead-onlycurrentThis attribute indicates the Module Type.
1.3.6.1.4.1.164.6.2.32.1.1.1.6ColumnmodlParamSwVerread-onlycurrentThis attribute indicates the Module's Software Version.
1.3.6.1.4.1.164.6.2.33ScalaragnNearFarConnectionread-onlycurrentThis parameter describes the connection between near-end and far-end agents.
1.3.6.1.4.1.164.6.2.34NodeagnAccess
1.3.6.1.4.1.164.6.2.34.1ScalaragnTelnetAccessread-writecurrentEnable/Disable accessing the device via Telnet. disable - no one will be allowed to access the device via Telnet. enable - all users are allowed Telnet Access.…
1.3.6.1.4.1.164.6.2.34.2ScalaragnWebAccessread-writecurrentEnable/Disable accessing the device via Web. disable - no one will be allowed to access the device via Web. enable - all users are allowed Web Access. managers…
1.3.6.1.4.1.164.6.2.34.3ScalaragnRadiusAccessread-writecurrentEnable/Disable authentication via RADIUS server.
1.3.6.1.4.1.164.6.2.34.4ScalaragnSshAccessread-writecurrentEnable/Disable accessing the device via SSH. disable - no one will be allowed to access the device via SSH. enable - all users are allowed SSH Access. managers…
1.3.6.1.4.1.164.6.2.35NodesystemInterface
1.3.6.1.4.1.164.6.2.35.1TableifCreateTablenot-accessiblecurrentThe Interface Configuration Table. This table enables to create interfaces of Entities.
1.3.6.1.4.1.164.6.2.35.1.1RowifCreateEntrynot-accessiblecurrentAn entry in the Interface Configuration table.
1.3.6.1.4.1.164.6.2.35.1.1.1ColumnifCreateEntityTyperead-onlycurrentThis object indicates the Type of the Entity that exists above the created interface. For a Logical Port, this value can be: other (1) when there is no fixed e…
1.3.6.1.4.1.164.6.2.35.1.1.2ColumnifCreateEntityIdxread-onlycurrentThis object indicates the Index of the Entity that exists above the created interface. For a Logical Port, this value can be: 9999 - N/A when there is no fixed…
1.3.6.1.4.1.164.6.2.35.1.1.3ColumnifCreateNumberread-onlycurrentThis object indicates the number of the Interface that is created.
1.3.6.1.4.1.164.6.2.35.1.1.4ColumnifCreateRowStatusread-createcurrentThis object enables the user to create/delete entries in this table.
1.3.6.1.4.1.164.6.2.35.1.1.5ColumnifCreateTyperead-createcurrentThis object indicates the Type of the Interface that is created.
1.3.6.1.4.1.164.6.2.35.1.1.6ColumnifCreateIndexread-onlycurrentThis object indicates the ifIndex of the created Interface. The ifIndex is assigned by the device.
1.3.6.1.4.1.164.6.2.35.1.1.7ColumnifCreateConnectedToread-createcurrentThis object indicates the entity connected to the created Interface. The value of this object can be ifIndex of the connected entity or any other number that c…
1.3.6.1.4.1.164.6.2.35.1.1.8ColumnifCreateParamsread-createcurrentThis object represents one or more parameters of the created Interface. Each group of bits (one or more bits) represents a specific parameter and its possible …
1.3.6.1.4.1.164.6.2.35.1.1.9ColumnifCreateConnectionPointerread-createcurrentThis parameter represents the entity that is connected to this Interface. It can be used instead of ifCreateConnectedTo. It is an OBJECT IDENTIFIER. This param…
1.3.6.1.4.1.164.6.2.35.2NodeinterfacePerformance
1.3.6.1.4.1.164.6.2.35.2.1TableifPerfTablenot-accessiblecurrentInterface Performance Table. The propose of this table is to support statistics counters having 64 bit by using 2 parameters with syntax= Integer32. This is be…
1.3.6.1.4.1.164.6.2.35.2.1.1RowifPerfEntrynot-accessiblecurrentAn entry in the Interface Performance Table.
1.3.6.1.4.1.164.6.2.35.2.1.1.1ColumnifPerfCounterTypenot-accessiblecurrent2nd index of the ifPerfTable. This parameter represents the Counter Type. Each application can have a different association between this object's value and cou…
1.3.6.1.4.1.164.6.2.35.2.1.1.2ColumnifPerfLowCounterPartread-onlycurrentIn order to support Counters having 64 bit length, the performance counter is divided into two 32 bit parameters as follows: [ 64 bit parameter ] = [ High 32 b…
1.3.6.1.4.1.164.6.2.35.2.1.1.3ColumnifPerfHighCounterPartread-onlycurrentThis parameter holds the High 32 bits of the counter (see description in the above parameter).
1.3.6.1.4.1.164.6.2.35.2.1.1.4ColumnifPerfHCCounterread-onlycurrentThis High Capacity counter holds whole 64 bits of the counter indicated by ifPerfCounterType (concatenates both counter parts ifPerfHighCounterPart&ifPerfLowCo…
1.3.6.1.4.1.164.6.2.36NodesystemOam
1.3.6.1.4.1.164.6.2.36.1TablesystemOamTablenot-accessiblecurrentThe OAM Configuration Table.
1.3.6.1.4.1.164.6.2.36.1.1RowsystemOamEntrynot-accessiblecurrentAn entry in the OAM table.
1.3.6.1.4.1.164.6.2.36.1.1.1ColumnsystemOamCnfgIdxnot-accessiblecurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.6.2.36.1.1.2ColumnsystemOamFrequencyread-writecurrentTime in sec. between 2 OAM packets.
1.3.6.1.4.1.164.6.2.36.1.1.3ColumnsystemOamTimeoutCyclesread-writecurrentNo. of cycles the agent will send OAM packets without receiving a response from the remote device before declaring that the connection to the remote side is do…
1.3.6.1.4.1.164.6.2.36.1.1.4ColumnsystemOamLinkCheckread-writecurrentThis MIB object determines whether continuous connectivity Link checks will be performed by the device for uplinks. For Vmux-2100: enable (3) value can be set …
1.3.6.1.4.1.164.6.2.36.2TablesystemOamDescrTablenot-accessiblecurrentThe OAM Descriptors Configuration Table.
1.3.6.1.4.1.164.6.2.36.2.1RowsystemOamDescrEntrynot-accessiblecurrentAn entry in the OAM table.
1.3.6.1.4.1.164.6.2.36.2.1.1ColumnsystemOamDescrIdxnot-accessiblecurrentThe OAM Descriptor Index.
1.3.6.1.4.1.164.6.2.36.2.1.2ColumnsystemOamDescrRowStatusread-createcurrentEnables the user to create/delete entries in this table.
1.3.6.1.4.1.164.6.2.36.2.1.3ColumnsystemOamDescrModeread-createcurrentThe OAM Mode of the Descriptor.
1.3.6.1.4.1.164.6.2.36.2.1.4ColumnsystemOamDescrCCDirectionread-createcurrentOAM Continuity Check function mode. both(2) - Agent sends OAM CC cells and checks received OAM CC cells. none(3) - Agent does not send and does not check recei…
1.3.6.1.4.1.164.6.2.36.2.1.5ColumnsystemOamDescrLoopbackOperationread-createcurrentThe OAM Loopback function mode. off(2) - Stop sending loopback OAM cells. on(3) - Start loopback OAM cells.
1.3.6.1.4.1.164.6.2.36.2.1.6ColumnsystemOamDescrLoopbackDestAddrread-createcurrentLoopback Destination Address.
1.3.6.1.4.1.164.6.2.36.2.1.7ColumnsystemOamDescrXcCounterread-onlycurrentThe number of connections that use this OAM Descriptor.
1.3.6.1.4.1.164.6.2.37ScalaragnDeviceViewread-onlycurrentThis variable denotes the view of the device: Look: old look, new look or new look 2. Material: Plastic or Metal.
1.3.6.1.4.1.164.6.2.38TablebitMappingTablenot-accessiblecurrentThis table maps bits of an octet string to an interface. For ACE-2002 this table is used to map bits of VLAN port lists to LAN VCC's. This table is the opposit…
1.3.6.1.4.1.164.6.2.38.1RowbitMappingEntrynot-accessiblecurrentEach entry in the table describes a correlation of a bit location to an interface. For ACE-2002 - Upon creation of a new LAN VCC the agent will add an entry to…
1.3.6.1.4.1.164.6.2.38.1.1ColumnbitMappingLocationnot-accessiblecurrentThe bit location in an octet string.
1.3.6.1.4.1.164.6.2.38.1.2ColumnbitMappingIndexread-onlycurrentThe interface index or any other index that should be mapped.
1.3.6.1.4.1.164.6.2.39ScalarbitMappingViewread-onlycurrentA view of the bitMappingTable in one object - each entry in the biMappingTable will have the corresponding Bit of this object (bitMappingLocation) = '1'. For A…
1.3.6.1.4.1.164.6.2.40TablehostTablenot-accessiblecurrentHost interface table.
1.3.6.1.4.1.164.6.2.40.1RowhostEntrynot-accessiblecurrentAn entry in the Host Table. The hostParam1, hostParam2, and hostParam3 entries may have different use in different applications.
1.3.6.1.4.1.164.6.2.40.1.1ColumnhostIndexnot-accessiblecurrentThe Host Table Index. This index can have the same value as Host No.
1.3.6.1.4.1.164.6.2.40.1.2ColumnhostIPread-createcurrentThe host interface IP address.
1.3.6.1.4.1.164.6.2.40.1.3ColumnhostIPMaskread-createcurrentThe host interface subnet mask.
1.3.6.1.4.1.164.6.2.40.1.4ColumnhostDefaultNextHopread-createcurrentThe host interface Default Next Hop address.
1.3.6.1.4.1.164.6.2.40.1.5ColumnhostModeread-createcurrentThis parameter represents the Host mode of operation. There can be different values for each application. For example: Not Applicable = 1.
1.3.6.1.4.1.164.6.2.40.1.6ColumnhostParam1read-createcurrentThis parameter represents the first Host parameter. There can be different values for each application. For example: Not Applicable = 1.
1.3.6.1.4.1.164.6.2.40.1.7ColumnhostParam2read-createcurrentThis parameter represents the 2nd Host parameter. There can be different values for each application.
1.3.6.1.4.1.164.6.2.40.1.8ColumnhostParam3read-createcurrentThis parameter represents the 3nd Host parameter. There can be different values for each application.
1.3.6.1.4.1.164.6.2.40.1.9ColumnhostRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.6.2.40.1.10ColumnhostVlanTaggingread-createcurrentHost VLAN support (Tagging). untag - No support of VLAN Tagging. tag - 4 VLAN bytes will be added to the frame.
1.3.6.1.4.1.164.6.2.40.1.11ColumnhostVlanIdread-createcurrentHost VLAN ID.
1.3.6.1.4.1.164.6.2.40.1.12ColumnhostVlanPriorityread-createcurrentHost VLAN Frame priority.
1.3.6.1.4.1.164.6.2.41TableinvNameXCTablenot-accessiblecurrentInverse Name XC Table. This table can be used to ease the search for a connection first index by the connection name.
1.3.6.1.4.1.164.6.2.41.1RowinvNameXCEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.41.1.1ColumninvNameXCnot-accessiblecurrentThe unique Connection name, associated to a Cross-Connection.
1.3.6.1.4.1.164.6.2.41.1.2ColumninvNameXCTyperead-onlycurrentThe OBJECT IDENTIFIER of the respective XC Table. Examples: XC Table invNameXCType atmVpCrossConnectTable 1.3.6.1.2.1.37.1.9 atmVcCrossConnectTable 1.3.6.1.2.1…
1.3.6.1.4.1.164.6.2.41.1.3ColumninvNameXCIndexread-onlycurrentThe XC Table (invNameXCType) may include more than one index. This object represents the value of the first XC Index.
1.3.6.1.4.1.164.6.2.42ScalaragnDeviceCapabilitiesread-onlycurrentIndicates the optional capabilities that are implemented by this device and are manageable through this MIB. For each capability 1 BIT is allocated in each Oct…
1.3.6.1.4.1.164.6.2.43TablerowInfoTablenot-accessiblecurrentThis table holds information of other tables.
1.3.6.1.4.1.164.6.2.43.1RowrowInfoEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.43.1.1ColumnrowInfoTableIdnot-accessiblecurrentThe OBJECT IDENTIFIER of the Table, which its information is held by this table (rowInfoTable). Examples: Table Name rowInfoTableId atmTrafficDescrParamTable 1…
1.3.6.1.4.1.164.6.2.43.1.2ColumnrowInfoCounterread-onlycurrentThe Number of rows in the table, indicated by rowInfoTableId.
1.3.6.1.4.1.164.6.2.43.1.3ColumnrowInfoIndexNextread-onlycurrentThe First Free Index of the table, indicated by rowInfoTableId.
1.3.6.1.4.1.164.6.2.43.1.4ColumnrowInfoMaxNoOfRowsread-onlycurrentThe maximum possible number of rows in the table, indicated by rowInfoTableId.
1.3.6.1.4.1.164.6.2.44ScalaragnStoreCmdread-writecurrentStore command. inFlash(3) = store the current Agent configuration in Flash memory. asDefConfigFile(4) = store the current Agent configuration as Default Config…
1.3.6.1.4.1.164.6.2.45TableagnFunctionTablenot-accessiblecurrentThis table is used in order to activate/deactivate device functions. The index indicates the function. Each function can be Enabled or Disabled.
1.3.6.1.4.1.164.6.2.45.1RowagnFunctionEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.45.1.1ColumnagnFunctionnot-accessiblecurrentThis MIB object indicates the function that will be enabled or disabled in the device. alarmForwarding= Fault Propagation (usually towards user port). For Vmux…
1.3.6.1.4.1.164.6.2.45.1.2ColumnagnFunctionActivationread-writecurrentThis MIB object indicates the activation of the current function.
1.3.6.1.4.1.164.6.2.46ScalaragnManagerConfigPortsread-writecurrentThis variable defines from which port/s this manager can manage the device. The value is a sum of 2**n, where n is a bit assigned to a certain port. For RIC-E1…
1.3.6.1.4.1.164.6.2.47ScalaragnEgressRateRangeread-writecurrentThis variable defines the valid ranges of egress rate. For example, for ETX 102: range 1 (2)= 128KBPS - 8MBPS, range 2 (3)= 256KBPS - 16MBPS, range 3 (4)= 512K…
1.3.6.1.4.1.164.6.2.48ScalaragnNoOfCurrentConnsread-onlycurrentThis variable indicates the number of connections currently configured for the agent.
1.3.6.1.4.1.164.6.2.49ScalaragnIngressRateRangeread-writecurrentThis variable defines the valid ranges of ingress rate. For example, for ETX 102: range 1 (2)= 128KBPS - 8MBPS, range 2 (3)= 256KBPS - 16MBPS, range 3 (4)= 512…
1.3.6.1.4.1.164.6.2.50TablealarmForwardingTablenot-accessiblecurrentThe Alarm Forwarding Mechanism will be operated for this table entries.
1.3.6.1.4.1.164.6.2.50.1RowalarmForwardingEntrynot-accessiblecurrentEach entry in this table is a pair of ports that the Alarm Forwarding Mechanism is determined for.
1.3.6.1.4.1.164.6.2.50.1.1ColumnalarmForwardingFailPortnot-accessiblecurrentAn Index of the port on which a fail occurs.
1.3.6.1.4.1.164.6.2.50.1.2ColumnalarmForwardingToPortnot-accessiblecurrentAn Index of the port that will be affected upon the failure of the alarmForwardingFailPort.
1.3.6.1.4.1.164.6.2.50.1.3ColumnalarmForwardingRowStatusread-createcurrentCreation/ Deletion of rows in the table.
1.3.6.1.4.1.164.6.2.50.1.4ColumnalarmForwardingRecoveryTimeread-createcurrentThis parameter defines the maximum time (sec) the affected port will hold the down state.
1.3.6.1.4.1.164.6.2.50.1.5ColumnalarmForwardingGroupConditionsread-createcurrentThis parameter is applicable when there is a group of interfaces in which a fault may occur, and one interface to which alarm is propagated (forwarded). 0 = Al…
1.3.6.1.4.1.164.6.2.50.1.6ColumnalarmForwardingCauseread-createcurrentBit map representing the cause upon which alarm forwarding will take place. bit 0 - LOSS (LINE DOWN) bit 1 - AIS bit 2 - RDI bit 3 - PROTOCOL DOWN.
1.3.6.1.4.1.164.6.2.50.1.7ColumnalarmForwardingRecoveryModeread-createcurrentThis parameter determines the Recovery Mode. manual - The user should stop the alarm forwarding by using the alarmForwardingRecoveryCommand. automatic - Alarm …
1.3.6.1.4.1.164.6.2.50.1.8ColumnalarmForwardingRecoveryCommandread-createcurrentThis parameter is a command. It is applicable when alarmForwardingRecoveryMode = manual. on - Will stop alarm forwarding. After setting to 'On', the agent will…
1.3.6.1.4.1.164.6.2.50.1.9ColumnalarmForwardingDelayread-createcurrentThis parameter determines the period of time (in seconds) the alarm of the alarmForwardingFailPort should exist before starting alarm forwarding.
1.3.6.1.4.1.164.6.2.50.1.10ColumnalarmForwardingDirectionread-createcurrentThis parameter determines the Direction of the Alarm Forwarding. unidirectional - alarmForwardingFailPort affects the alarmForwardingToPort. bidirectional - al…
1.3.6.1.4.1.164.6.2.50.1.11ColumnalarmForwardingActionread-createcurrentBit map representing the action to be performed when alarm forwarding will take place. bit 0 - No Action. '1' value - device should NOT perform any action, tho…
1.3.6.1.4.1.164.6.2.51ScalaragnSwVersionSwapCmdread-writecurrentSW switch command. mainAndBackup (3) = Swap between Main SW and the backup one. Agent will perform the required command and change automatically the value of t…
1.3.6.1.4.1.164.6.2.52NodeagnClockSource
1.3.6.1.4.1.164.6.2.52.1TableagnClkSrcPortTablenot-accessiblecurrentPool of Ports for the Master/Fallback Clock Source and of Recovered IDs. For devices with more than one configuration: Set operation is valid only to the TmpCn…
1.3.6.1.4.1.164.6.2.52.1.1RowagnClkSrcPortEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.52.1.1.1ColumnagnClkSrcPortCnfgIdxnot-accessiblecurrentThis object indicates the Idx of the Cnfg being accessed ; Idx of 255 relates to the TmpCnfg. For product supporting a single configuration, the value will be …
1.3.6.1.4.1.164.6.2.52.1.1.2ColumnagnClkSrcPortSrcIdxnot-accessiblecurrentClock Source Index. master - refers to Master clock fallback - refers to Fallback clock recovered - refers to Recovered clock.
1.3.6.1.4.1.164.6.2.52.1.1.3ColumnagnClkSrcPortIdxnot-accessiblecurrentThis object indicates the running Idx of the port that is to be used as Clock Source, for each agnClkSrcPortSrcIdx instance. In case of Recovered Clock - it in…
1.3.6.1.4.1.164.6.2.52.1.1.4ColumnagnClkSrcPortread-createcurrentThis object indicates the Port/Interface Index of the port that is to be used as Clock Source. In case of Recovered Clock - it indicates the PW number.
1.3.6.1.4.1.164.6.2.52.1.1.5ColumnagnClkSrcPortRowStatusread-createcurrentThis object enables Creation/ Deletion of rows in the table.
1.3.6.1.4.1.164.6.2.52.1.1.6ColumnagnClkSrcPortAdminStatusread-createcurrentThis object indicates the Recovered Clock Administrative Status.
1.3.6.1.4.1.164.6.2.52.1.1.7ColumnagnClkSrcPortTyperead-createcurrentThis object is relevant only in case of Recovery Clock. It indicates the Clock Type.
1.3.6.1.4.1.164.6.2.52.1.1.8ColumnagnClkSrcPortQualityread-createcurrentThis object indicates the Clock Source Quality.
1.3.6.1.4.1.164.6.2.52.1.1.9ColumnagnClkSrcPortNetTyperead-createcurrentThis object is relevant only in case of Recovery Clock. It indicates the Clock Network Type, i.e. the PSN network characteristics and behavior.
1.3.6.1.4.1.164.6.2.52.1.1.10ColumnagnClkSrcPortStateread-onlycurrentThis object indicates the Clock State. freeRun(1) - Clock recovery is not locked to any clock. frequencyAcquisition(2) - Adaptive clock recovery is learning th…
1.3.6.1.4.1.164.6.2.52.2TableagnCurrClkTablenot-accessiblecurrentCurrent Clock Source.
1.3.6.1.4.1.164.6.2.52.2.1RowagnCurrClkEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.52.2.1.1ColumnagnCurrClkObjIdxnot-accessiblecurrentThis MIB object identifies the object for which the Clock Source is used (System, Other System, Card).
1.3.6.1.4.1.164.6.2.52.2.1.2ColumnagnCurrClkModeread-onlycurrentCurrent Clock Source Mode. master - refers Master clock fallback - refers Fallback clock internal - only when both Master and Fallback Sources failed
1.3.6.1.4.1.164.6.2.52.2.1.3ColumnagnCurrClkSrcread-onlycurrentThis object indicates the Current Clock Source.
1.3.6.1.4.1.164.6.2.52.2.1.4ColumnagnCurrClkPortread-onlycurrentThis object indicates the Port/Interface Index of the port that is Currently used as Clock Source.
1.3.6.1.4.1.164.6.2.52.2.1.5ColumnagnCurrClkHoldoverread-onlycurrentCurrent Clock Holdover State. As a last resort, in the absence of higher quality timing: - a SONET/SDH object can enter 'holdover' state, until higher quality …
1.3.6.1.4.1.164.6.2.52.2.1.6ColumnagnCurrClkSsmBasedread-onlycurrentThis parameter indicates whether clock source is selected based on receive clock quality. Clock quality is indicated in S1 byte inside SONET/SDH overhead, (enc…
1.3.6.1.4.1.164.6.2.52.2.1.7ColumnagnCurrClkStateread-onlycurrentThis object indicates the Current Clock State. freeRun(1) - Current clock state machine is not locked and run from the internal oscillator. rapidPhaseLock(2) -…
1.3.6.1.4.1.164.6.2.52.2.1.8ColumnagnCurrClkQualificationread-onlycurrentThis object indicates the Current Clock Qualification and defines whether the PLL can locked according to the stratum definitions.
1.3.6.1.4.1.164.6.2.52.3NodeagnClockMonitoring
1.3.6.1.4.1.164.6.2.52.3.1TableagnClkCurrentTablenot-accessiblecurrentThe Clock Current table.
1.3.6.1.4.1.164.6.2.52.3.1.1RowagnClkCurrentEntrynot-accessiblecurrentAn entry in the Clock Current table.
1.3.6.1.4.1.164.6.2.52.3.1.1.1ColumnagnClkCurrentIndexnot-accessiblecurrentAn Index that is uniquely represents the Clock.
1.3.6.1.4.1.164.6.2.52.3.1.1.2ColumnagnClkCurrentRxPacketsread-onlycurrentThe counter associated with the number of Received Packets, encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.6.2.52.3.1.1.3ColumnagnClkCurrentLostPacketsread-onlycurrentThe counter associated with the number of Lost Packets, encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.6.2.52.3.1.1.4ColumnagnClkCurrentOutOfOrderPacketsread-onlycurrentThe counter associated with the number of times Out-of-Order Packets encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.6.2.52.3.1.1.5ColumnagnClkCurrentBufferUnderflowread-onlycurrentThe counter associated with the number of times Underflow event encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.6.2.52.3.2TableagnClkIntervalTablenot-accessiblecurrentThe Clock Interval table.
1.3.6.1.4.1.164.6.2.52.3.2.1RowagnClkIntervalEntrynot-accessiblecurrentAn entry in the Clock Interval table.
1.3.6.1.4.1.164.6.2.52.3.2.1.1ColumnagnClkIntervalIndexnot-accessiblecurrentAn Index that is uniquely represents the Clock.
1.3.6.1.4.1.164.6.2.52.3.2.1.2ColumnagnClkIntervalNumbernot-accessiblecurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.6.2.52.3.2.1.3ColumnagnClkIntervalRxPacketsread-onlycurrentThe counter associated with the number of Received Packets, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.6.2.52.3.2.1.4ColumnagnClkIntervalLostPacketsread-onlycurrentThe counter associated with the number of Lost Packets, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.6.2.52.3.2.1.5ColumnagnClkIntervalOutOfOrderPacketsread-onlycurrentThe counter associated with the number of times Out-of-Order Packets are detected, encountered by a Bridge Port in one of the previous 96, individual 15 minute…
1.3.6.1.4.1.164.6.2.52.3.2.1.6ColumnagnClkIntervalBufferUnderflowread-onlycurrentThe counter associated with the number of times Underflow event is detected, encountered by a Bridge Port in one of the previous 96, individual 15 minute, inte…
1.3.6.1.4.1.164.6.2.53ScalaragnMaxNoOfConnsread-onlycurrentThis variable indicates the maximum number of connections that can be configured for the agent.
1.3.6.1.4.1.164.6.2.54Nodelag
1.3.6.1.4.1.164.6.2.54.1TablelagTablenot-accessiblecurrentA table defining Link Aggregation Groups port association, and other parameters.
1.3.6.1.4.1.164.6.2.54.1.1RowlagEntrynot-accessiblecurrentAn entry in the LAG table.
1.3.6.1.4.1.164.6.2.54.1.1.1ColumnlagCnfgIdxnot-accessiblecurrentThis object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.6.2.54.1.1.2ColumnlagIdxnot-accessiblecurrentThis object indicates LAG unique index.
1.3.6.1.4.1.164.6.2.54.1.1.3ColumnlagPortMembersread-createcurrentThe set of ports which are permanently assigned to the Link Aggregation Group. The default value of this object is a string of zeros.
1.3.6.1.4.1.164.6.2.54.1.1.4ColumnlagDistributionMethodread-createcurrentThis object defines the criteria for the 802.3ad (LAG) to split the traffic between ports
1.3.6.1.4.1.164.6.2.54.1.1.5ColumnlagRecoveryModeread-createcurrentThis object defines whether traffic will be returned to a port after its recovery. This object is applicable only when lagDistributionMethod= oneToOne (3).
1.3.6.1.4.1.164.6.2.54.1.1.6ColumnlagWaitToRestoreread-createcurrentThis object defines traffic recovery time (in seconds) to the port after its recovery. This object is applicable only when lagRecoveryMode= revertive (3).
1.3.6.1.4.1.164.6.2.54.1.1.7ColumnlagRowStatusread-createcurrentThis object enables user to create/delete entries of this table. Note: When using LAG standard package, this table is static, hence, only the values active(1),…
1.3.6.1.4.1.164.6.2.54.1.1.8ColumnlagShutDownDurationUponFlipread-createcurrentThis object defines the duration (in seconds) the active port transmission is shut down after LAG Flip occurs. The transmission is shut down and then opened ag…
1.3.6.1.4.1.164.6.2.54.1.1.9ColumnlagRdnMethodread-createcurrentThis object defines the redundancy method.
1.3.6.1.4.1.164.6.2.54.1.1.10ColumnlagLacpEnableread-createcurrentEnabling/Disabling the LACP for a LAG. The LACP will be enabled for all ports belonging to this LAG.
1.3.6.1.4.1.164.6.2.54.2TablelagStatTablenot-accessiblecurrentA table defining Link Aggregation Groups Redundancy. This table is applicable only when lagDistributionMethod = oneToOne.
1.3.6.1.4.1.164.6.2.54.2.1RowlagStatEntrynot-accessiblecurrentAn entry in the LAG Status table.
1.3.6.1.4.1.164.6.2.54.2.1.1ColumnlagStatForcePortread-writecurrentThis object enables user to enforce the active port. 0 = No Enforcement; Otherwise the ifIndex of the port.
1.3.6.1.4.1.164.6.2.54.2.1.2ColumnlagStatActivePortread-onlycurrentThis object indicates the current active port. It is applicable only when lagDistributionMethod = oneToOne. The value is the ifIndex of the port. 0 = none of t…
1.3.6.1.4.1.164.6.2.55Nodegfp
1.3.6.1.4.1.164.6.2.55.1TablegfpCnfgTablenot-accessiblecurrentConfiguration table for GFP (General Framing Protocol).
1.3.6.1.4.1.164.6.2.55.1.1RowgfpCnfgEntrynot-accessiblecurrentAn entry in the GFP configuration table.
1.3.6.1.4.1.164.6.2.55.1.1.1ColumngfpCnfgIdxnot-accessiblecurrentIndex to GFP configuration table.
1.3.6.1.4.1.164.6.2.55.1.1.2ColumngfpPayloadFcsread-writecurrentThis object defines whether protocol header will include FCS.
1.3.6.1.4.1.164.6.2.55.1.1.3ColumngfpRxTxScrambleread-writecurrentThis object defines whether transmission will be scrambled.
1.3.6.1.4.1.164.6.2.55.1.1.4ColumngfpVcatHeaderread-writecurrentVCAT header is LCAS CONTROL packet as described in the G-7043. one control packet is transmitted in a period of 16 Multi frame
1.3.6.1.4.1.164.6.2.56TableagnGroupTablenot-accessiblecurrentA table that enables associating components to Group/s (or removing components of a group). The Group Idx can then be used in other tables (e.g alarmForwarding…
1.3.6.1.4.1.164.6.2.56.1RowagnGroupEntrynot-accessiblecurrentAn entry in the agnGroupTable.
1.3.6.1.4.1.164.6.2.56.1.1ColumnagnGroupCnfgIdxnot-accessiblecurrentThis object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.6.2.56.1.2ColumnagnGroupIdxnot-accessiblecurrentThis object indicates a unique Group Index.
1.3.6.1.4.1.164.6.2.56.1.3ColumnagnGroupComponentIdxnot-accessiblecurrentThis object indicates a unique Component Index that belongs to the Group defined by agnGroupIdx.
1.3.6.1.4.1.164.6.2.56.1.4ColumnagnGroupRowStatusread-createcurrentThis object enables user to create/delete entries of this table. destroy - If a Group is used in another table, Agent may not allow destroying the entry/ies th…
1.3.6.1.4.1.164.6.2.57ScalaragnStatNoOfUploadedIntervalsread-onlycurrentThis parameter indicates the Number of Intervals that were successfully collected and uploaded in the last statistics collection session.
1.3.6.1.4.1.164.6.2.58NodeagnSyslog
1.3.6.1.4.1.164.6.2.58.1ScalaragnSyslogDeviceUdpPortread-writecurrentThe UDP Port of the device, from which Syslog messages are sent. Default=514.
1.3.6.1.4.1.164.6.2.58.2ScalaragnSyslogFacilityread-writecurrentA user defined SW module, task or function, from which Syslog messages are sent to the remote Server.
1.3.6.1.4.1.164.6.2.58.3ScalaragnSyslogSeverityLevelread-writecurrentDevice will send events equal or exceeding this severity level (configured by user).
1.3.6.1.4.1.164.6.2.59ScalaragnNetworkInterfaceTyperead-writecurrentThis MIB object indicates the network interface type to be used by the device. It is used for devices that use only one network port type.
1.3.6.1.4.1.164.6.2.60ScalaragnTrapDelayread-writecurrentThis variable enables the user to set a delay (in seconds) before a trap is sent. This delay will be used only for traps that need to be sent during device ini…
1.3.6.1.4.1.164.6.2.62TableagnStringToIndexTablenot-accessiblecurrentThis table holds the conversions of tables from unique String to numeric index.
1.3.6.1.4.1.164.6.2.62.1RowagnStringToIndexEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.62.1.1ColumnagnStringToIndexTableIdnot-accessiblecurrentThe OBJECT IDENTIFIER of the Table, having as index numeric values. In this table, the value of agnStringToIndexUserName is an attribute.
1.3.6.1.4.1.164.6.2.62.1.2ColumnagnStringToIndexUserNamenot-accessiblecurrentThis object indicates a unique name used by agnStringToIndexTableId, although it is not it's index.
1.3.6.1.4.1.164.6.2.62.1.3ColumnagnStringToIndexTableIndexread-onlycurrentThe numeric Index of agnStringToIndexTableId.
1.3.6.1.4.1.164.6.2.63TableagnRowPointerTablenot-accessiblecurrentThis table holds information about a specific entry in a table. For example, number of usages of this row.
1.3.6.1.4.1.164.6.2.63.1RowagnRowPointerEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.63.1.1ColumnagnRowPointerIndexnot-accessiblecurrentThe OBJECT IDENTIFIER of an entry in a table.
1.3.6.1.4.1.164.6.2.63.1.2ColumnagnRowPointerNoOfUsagesread-onlycurrentThe number of usages of specific entry in a table, which is pointed by agnRowPointerIndex.Usually, when the value of this counter is greater than 0,the entry c…
1.3.6.1.4.1.164.6.3Nodeservices
1.3.6.1.4.1.164.6.3.1Nodewfq
1.3.6.1.4.1.164.6.3.1.1TablewfqTablenot-accessiblecurrentThis table allows user to define several WFQ tables per output port. WFQ supports flows with different bandwidth requirements by giving each queue a weight tha…
1.3.6.1.4.1.164.6.3.1.1.1RowwfqEntrynot-accessiblecurrentAn entry in the Weighted Fair Queueing table.
1.3.6.1.4.1.164.6.3.1.1.1.1ColumnwfqCnfgIdxnot-accessiblecurrentThis object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Ag…
1.3.6.1.4.1.164.6.3.1.1.1.2ColumnwfqPrtIdxnot-accessiblecurrentThis object indicates a unique port or interface number, for which Weighted Fair Queueing table is applicable . For numbering, see product's spec. For some pro…
1.3.6.1.4.1.164.6.3.1.1.1.3ColumnwfqTblIdxnot-accessiblecurrentThis object indicates which Weighted Fair Queueing (WFQ) Table is being used. There can be several tables. For FCD-155 User will select which one will be used …
1.3.6.1.4.1.164.6.3.1.1.1.4ColumnwfqQueueIdxnot-accessiblecurrentThis object indicates a queue index. For FCD-155, valid queues are 1..3. The 4th queue is not in MIB. Its weight will be RO, Calculated according to the sum of…
1.3.6.1.4.1.164.6.3.1.1.1.5ColumnwfqRowStatusread-createcurrentThis object enables Creation/Deletion of rows in the WFQ table. For FCD-155, rows are not created nor destroyed by user.
1.3.6.1.4.1.164.6.3.1.1.1.6ColumnwfqWeightValueread-createcurrentThis object indicates a relative weight value. User should make sure that the sum of values for all queues will not exceed 100% (sum should be BELOW 100% in or…
1.3.6.1.4.1.164.6.3.1.1.1.7ColumnwfqSchedulingModeread-createcurrentThis object controls which scheduling mode is used: Weighted Fair Queuing (WFQ) scheme or priority Queue (Strict Priority).
1.3.6.1.4.1.164.6.3.1.1.1.8ColumnwfqMinRateAbsoluteread-createcurrentThe minimum absolute rate, in kbps, that should be allocated to this queue. If the value is zero, then there is effectively no minimum rate guarantee. If the v…
1.3.6.1.4.1.164.6.3.1.1.1.9ColumnwfqMaxPacketSizeread-createcurrentThe size of the largest packet which can be received on this queue, specified in octets. Packets larger than this size will be discarded.
1.3.6.1.4.1.164.6.3.2NodedscpMapping
1.3.6.1.4.1.164.6.3.2.1TabledscpMappingTablenot-accessiblecurrentMapping of DSCP value to a regenerated priority level.
1.3.6.1.4.1.164.6.3.2.1.1RowdscpMappingEntrynot-accessiblecurrentAn entry in dscpMappingTable.
1.3.6.1.4.1.164.6.3.2.1.1.1ColumndscpMappingCnfgIdxnot-accessiblecurrentThis object indicates the Idx of the Agent Cnfg the following objects refer to. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For…
1.3.6.1.4.1.164.6.3.2.1.1.2ColumndscpMappingDscpIdxnot-accessiblecurrentDSCP value of the incoming IP packet
1.3.6.1.4.1.164.6.3.2.1.1.3ColumndscpMappingRegenPriorityread-writecurrentThe Regenerated Priority level the incoming DSCP value is mapped to. For FCD-155, valid values are 0,1,2,3
1.3.6.1.4.1.164.6.3.3NodeifTeQos
1.3.6.1.4.1.164.6.3.3.1TableifTeQosTablenot-accessiblecurrentThe TE QOS Interface Table.
1.3.6.1.4.1.164.6.3.3.1.1RowifTeQosEntrynot-accessiblecurrentAn entry in the TE QOS Interface table.
1.3.6.1.4.1.164.6.3.3.1.1.1ColumnifTeQosIdx1not-accessiblecurrentThis object indicates the 1st Index of the table.
1.3.6.1.4.1.164.6.3.3.1.1.2ColumnifTeQosIdx2not-accessiblecurrentThis object indicates the 2nd Index of the table.
1.3.6.1.4.1.164.6.3.3.1.1.3ColumnifTeQosIdx3not-accessiblecurrentThis object indicates the 3rd Index of the table.
1.3.6.1.4.1.164.6.3.3.1.1.4ColumnifTeQosParamread-writecurrentThis object is used for QOS attributes of the entry's entities.
1.3.6.1.4.1.164.6.3.3.1.1.5ColumnifTeQosParam2read-writecurrentThis object is used for 2nd group QOS attributes of the entry's entities.
1.3.6.1.4.1.164.6.3.3.1.1.6ColumnifTeQosStatusread-writecurrentThis object is used to create, activate and destroy entries of this table.
1.3.6.1.4.1.164.6.3.4NodeportQos
1.3.6.1.4.1.164.6.3.4.1TableprtPriorityTablenot-accessiblecurrentA table - Parameters per port per Priority .
1.3.6.1.4.1.164.6.3.4.1.1RowprtPriorityEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.3.4.1.1.1ColumnprtPriorityIdx1not-accessiblecurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. or any other Index.
1.3.6.1.4.1.164.6.3.4.1.1.2ColumnprtPriorityPrtIdxnot-accessiblecurrentThis object indicates a unique Port Index. Refer to device specification for port Index.
1.3.6.1.4.1.164.6.3.4.1.1.3ColumnprtPriorityIdxnot-accessiblecurrentThis object indicates the Traffic Priority Index.
1.3.6.1.4.1.164.6.3.4.1.1.4ColumnprtPriorityIngressRateLimitread-writecurrentThe maximum rate permitted at Ingress of this port with this Traffic Priority, in Kbps.
1.3.6.1.4.1.164.6.3.4.2TableprtQosTablenot-accessiblecurrentPort QoS (Quality of Service) table.
1.3.6.1.4.1.164.6.3.4.2.1RowprtQosEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.3.4.2.1.1ColumnprtQosIdxnot-accessiblecurrentThe first index of the table. This attribute might indicate the Idx of the Cnfg (1..255) being accessed ; Idx of 255 relates to the TmpCnfg or any other Index.
1.3.6.1.4.1.164.6.3.4.2.1.2ColumnprtQosPrtIdxnot-accessiblecurrentThis object indicates a unique Port Index. Refer to device specification for port Index.
1.3.6.1.4.1.164.6.3.4.2.1.3ColumnprtQosDirectionnot-accessiblecurrentThis object indicates the port's QoS Direction.
1.3.6.1.4.1.164.6.3.4.2.1.4ColumnprtQosRateLimitPacketTyperead-writecurrentThis object indicates the Type of Packets on which Rate Limitation is applied.
1.3.6.1.4.1.164.6.3.4.2.1.5ColumnprtQosRateLimitCIRread-writecurrentThis object indicates the port's CIR (Committed Information Rate) in Kbps. Value=0 represents best effort.
1.3.6.1.4.1.164.6.3.4.2.1.6ColumnprtQosRateLimitCBSread-writecurrentThis object indicates the port's CBS (Committed Burst Size) in KB. Value=0 represents best effort.
1.3.6.1.4.1.164.6.3.4.2.1.7ColumnprtQosRateLimitEIRread-writecurrentThis object indicates the port's EIR (Excess Information Rate) in Kbps.
1.3.6.1.4.1.164.6.3.4.2.1.8ColumnprtQosRateLimitEBSread-writecurrentThis object indicates the port's EBS (Excess Burst Size) in KB.
1.3.6.1.4.1.164.6.3.5NodeprtTrafficClass
1.3.6.1.4.1.164.6.3.5.1TableportTrafficClassTablenot-accessiblecurrentMapping of port to Traffic Class level.
1.3.6.1.4.1.164.6.3.5.1.1RowportTrafficClassEntrynot-accessiblecurrentAn entry in portTrafficClassTable.
1.3.6.1.4.1.164.6.3.5.1.1.1ColumnportTrafficClassIdx1not-accessiblecurrentThis attribute indicates the 1st index of the table. This may be the Idx of the Cnfg(1..255) being accessed; Idx of 255 relates to the TmpCnfg, or any other In…
1.3.6.1.4.1.164.6.3.5.1.1.2ColumnportTrafficClassPortIdxnot-accessiblecurrentThis object indicates a unique Port Index. Refer to device specification for port Index.
1.3.6.1.4.1.164.6.3.5.1.1.3ColumnportTrafficClassread-writecurrentThis object indicates the Traffic Class level of this port.
1.3.6.1.4.1.164.6.3.6TableserviceTablenot-accessiblecurrentTable of services.
1.3.6.1.4.1.164.6.3.6.1RowserviceEntrynot-accessiblecurrentAn entry in the Service Table.
1.3.6.1.4.1.164.6.3.6.1.1ColumnflowIndexnot-accessiblecurrentDefines the Flow ID the service is associated to.
1.3.6.1.4.1.164.6.3.6.1.2ColumnserviceIndexnot-accessiblecurrentDefines the Service ID - according to the CoS.
1.3.6.1.4.1.164.6.3.6.1.3ColumnserviceRowStatusread-createcurrentThis attribute is used to create a new row or to delete an existing row in the table.
1.3.6.1.4.1.164.6.3.6.1.4ColumnserviceNameread-createcurrentThis attribute defines the service name.
1.3.6.1.4.1.164.6.3.6.1.5ColumnserviceBwProfileIdread-createcurrentThis variable holds the index of the Ingress BW profile assigned to that service.
1.3.6.1.4.1.164.6.3.7TableevcCosTablenot-accessiblecurrentThis table defines mapping of Ethernet Virtual Connection (EVC) ID to Class of Service (CoS) ID
1.3.6.1.4.1.164.6.3.7.1RowevcCosEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.3.7.1.1ColumnevcCosCnfgIdxnot-accessiblecurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.6.3.7.1.2ColumnevcCosEvcIdxnot-accessiblecurrentThis attribute indicates EVC Id.
1.3.6.1.4.1.164.6.3.7.1.3ColumnevcCosRowStatusread-createcurrentThis attribute allows to create/delete a row in this table.
1.3.6.1.4.1.164.6.3.7.1.5ColumnevcCosEvcNameread-createcurrentA string that identifies the EVC. It should be unique in the Maintenance Domain (i.e., in the managed network) Used as MEG ID field in OAM messages.
1.3.6.1.4.1.164.6.3.7.1.6ColumnevcCosSpVlanIdread-createcurrentThis object indicates the SP (Service Provider) VLAN used when sending an OAM message for the specified EVC.
1.3.6.1.4.1.164.6.3.8TableserviceStatTablenot-accessiblecurrentService statistics table.
1.3.6.1.4.1.164.6.3.8.1RowserviceStatEntrynot-accessiblecurrentAn entry in the Service Statistics Table.
1.3.6.1.4.1.164.6.3.8.1.1ColumnserviceStatDirectionnot-accessiblecurrentThe direction in wich the measurement is taken.
1.3.6.1.4.1.164.6.3.8.1.2ColumnsrvForwardGreenPacketsread-onlycurrentThis attribute displays the counted number of forwarded packets that where marked Green.
1.3.6.1.4.1.164.6.3.8.1.3ColumnsrvForwardGreenPacktesOverflowread-onlycurrentThis attribute displays the number of times that the forwardGreenPackets counter has overflowed.
1.3.6.1.4.1.164.6.3.8.1.4ColumnsrvForwardYellowPacketsread-onlycurrentThis attribute displays the counted number of forwarded packets that where marked Yellow.
1.3.6.1.4.1.164.6.3.8.1.5ColumnsrvForwardYellowPacketsOverflowread-onlycurrentThis attribute displays the number of times that the forwardYellowPackets counter has overflowed.
1.3.6.1.4.1.164.6.3.8.1.6ColumnsrvDiscardGreenPacketread-onlycurrentThis attribute displays the counted number of discarded packets that where marked Green.
1.3.6.1.4.1.164.6.3.8.1.7ColumnsrvDiscardGreenPacketOverflowread-onlycurrentThis attribute displays the number of times that the discardGreenPacket counter has overflowed.
1.3.6.1.4.1.164.6.3.8.1.8ColumnsrvDiscardYellowRedPacketsread-onlycurrentThis attribute displays the counted number of discarded packets that where marked Yellow or Red.
1.3.6.1.4.1.164.6.3.8.1.9ColumnsrvDiscardYellowRedPacketsOverflowread-onlycurrentThis attribute displays the number of times that the discardYellowRedPackets counter has overflowed.
1.3.6.1.4.1.164.6.3.8.1.10ColumnsrvForwardGreenBytesread-onlycurrentThis attribute displays the counted number of forwarded bytes that where marked Green.
1.3.6.1.4.1.164.6.3.8.1.11ColumnsrvForwardGreenBytesOverflowread-onlycurrentThis attribute displays the number of times that the forwardGreenBytes counter has overflowed.
1.3.6.1.4.1.164.6.3.8.1.12ColumnsrvForwardYellowBytesread-onlycurrentThis attribute displays the counted number of forwarded bytes that where marked Yellow.
1.3.6.1.4.1.164.6.3.8.1.13ColumnsrvForwardYellowBytesOverflowread-onlycurrentThis attribute displays the number of times that the forwardYellowBytes counter has overflowed.
1.3.6.1.4.1.164.6.3.8.1.14ColumnsrvDiscardGreenBytesread-onlycurrentThis attribute displays the counted number of discarded bytes that where marked Green.
1.3.6.1.4.1.164.6.3.8.1.15ColumnsrvDiscardGreenBytesOverflowread-onlycurrentThis attribute displays the number of times that the discardGreenBytes counter has overflowed.
1.3.6.1.4.1.164.6.3.8.1.16ColumnsrvDiscardYellowRedBytesread-onlycurrentThis attribute displays the counted number of discarded bytes that where marked Yellow or Red.
1.3.6.1.4.1.164.6.3.8.1.17ColumnsrvDiscardYellowRedBytesOverflowread-onlycurrentThis attribute displays the number of times that the discardYellowRedBytes counter has overflowed.
1.3.6.1.4.1.164.6.3.8.1.18ColumnsrvResetStatsCmdread-createcurrentReset statistic counters of the service.
1.3.6.1.4.1.164.6.3.8.1.19ColumnsrvDiscardYellowPacketsread-onlycurrentThis attribute displays the counted number of discarded packets that where marked Yellow.
1.3.6.1.4.1.164.6.3.8.1.20ColumnsrvDiscardYellowPacketsOverflowread-onlycurrentThis attribute displays the number of times that the discardYellowPackets counter has overflowed.
1.3.6.1.4.1.164.6.3.8.1.21ColumnsrvDiscardYellowBytesread-onlycurrentThis attribute displays the counted number of discarded bytes that where marked Yellow.
1.3.6.1.4.1.164.6.3.8.1.22ColumnsrvDiscardYellowBytesOverflowread-onlycurrentThis attribute displays the number of times that the discardYellowBytes counter has overflowed.
1.3.6.1.4.1.164.6.3.8.1.23ColumnsrvDiscardRedPacketsread-onlycurrentThis attribute displays the counted number of discarded packets that where marked Red.
1.3.6.1.4.1.164.6.3.8.1.24ColumnsrvDiscardRedPacketsOverflowread-onlycurrentThis attribute displays the number of times that the discardRedPackets counter has overflowed.
1.3.6.1.4.1.164.6.3.8.1.25ColumnsrvDiscardRedBytesread-onlycurrentThis attribute displays the counted number of discarded bytes that where marked Red.
1.3.6.1.4.1.164.6.3.8.1.26ColumnsrvDiscardRedBytesOverflowread-onlycurrentThis attribute displays the number of times that the discardRedBytes counter has overflowed.
1.3.6.1.4.1.164.6.3.9NodemappingProfileObjects
1.3.6.1.4.1.164.6.3.9.1TableflowMappingProfileTablenot-accessiblecurrentThis table holds flow mapping profiles.
1.3.6.1.4.1.164.6.3.9.1.1RowflowMappingProfileEntrynot-accessiblecurrentEach entry in this table describes one Flow mapping profile with one of its Flow Mapping supported, according to the Priority order. The information includes a…
1.3.6.1.4.1.164.6.3.9.1.1.1ColumnflowMappingProfileIndexnot-accessiblecurrentA running index for the Flow Mapping Profile table.
1.3.6.1.4.1.164.6.3.9.1.1.2ColumnflowMappingProfilePrioritynot-accessiblecurrentThe priority of the Mapping selected by flowMappingProfileMapIndex within the Flow Mapping Profile.
1.3.6.1.4.1.164.6.3.9.1.1.3ColumnflowMappingProfileRowStatusread-createcurrentThis attribute is used to create a new row or to delete an existing row in the table.
1.3.6.1.4.1.164.6.3.9.1.1.4ColumnflowMappingProfileNumOfMapsread-createcurrentThis attribute determines the number of the mappings associated to the Flow Mapping Profile.
1.3.6.1.4.1.164.6.3.9.1.1.5ColumnflowMappingProfileMapIndexread-createcurrentThis attribute holds a reference to the mapping index. It specifies the mapping selected for the Mapping Profile for the selected Priority. When flowMappingPro…
1.3.6.1.4.1.164.6.3.9.1.1.6ColumnflowMappingProfileNameread-createcurrentThis attribute defines the name assigned to flowMappingIndex profile.
1.3.6.1.4.1.164.6.3.9.2TableqosFlowMappingTablenot-accessiblecurrentA table of Flow Mapping.
1.3.6.1.4.1.164.6.3.9.2.1RowqosFlowMappingEntrynot-accessiblecurrentEach entry in this table describes one Flow Mapping. The information includes combination (AND function) of all the classifications, as defined in the qosFlowM…
1.3.6.1.4.1.164.6.3.9.2.1.1ColumnqosFlowMappingIdx1not-accessiblecurrent- In case the table is accessed via flowMappingProfileTable this is a running index for the QoS Flow Mapping table. - In case the table is not accessed via flo…
1.3.6.1.4.1.164.6.3.9.2.1.2ColumnqosFlowMappingIdx2not-accessiblecurrentAn index for the QoS Flow Mapping table. - In case the table is accessed via flowMappingProfileTable the index will be fixed = 1. - In case the table is not ac…
1.3.6.1.4.1.164.6.3.9.2.1.3ColumnqosFlowMappingIdx3not-accessiblecurrentAn index for the QoS Flow Mapping table. - In case the table is accessed via flowMappingProfileTable the index will be fixed = 1. - In case the table is not ac…
1.3.6.1.4.1.164.6.3.9.2.1.4ColumnqosFlowMappingRowStatusread-createcurrentThis attribute is used to create a new row or to delete an existing row in the table.
1.3.6.1.4.1.164.6.3.9.2.1.5ColumnqosFlowMappingCriteriaread-createcurrentThis attribute determines upon which criterion the flow will be mapped.
1.3.6.1.4.1.164.6.3.9.2.1.6ColumnqosFlowMappingIeee802dot1pread-createcurrentThis attribute determines which TOS values are applicable for that flow. Each bit (0..7) represents a different 802.1 P-bit value. Setting '1' to the bit means…
1.3.6.1.4.1.164.6.3.9.2.1.7ColumnqosFlowMappingTosread-createcurrentThis attribute determines which TOS values are applicable for that flow. Each bit (0..7) represents a different TOS value. Setting '1' to the bit means that th…
1.3.6.1.4.1.164.6.3.9.2.1.8ColumnqosFlowMappingFromDscpread-createcurrentThis attribute determines the first DSCP value to compare with in a range. It is relevant only in case the dscp bit (2) in qosFlowMappingCriteria equals 1.
1.3.6.1.4.1.164.6.3.9.2.1.9ColumnqosFlowMappingToDscpread-createcurrentThis attribute determines the first DSCP value to compare with in a range. It is relevant only in case the dscp bit (2) in qosFlowMappingCriteria equals 1.
1.3.6.1.4.1.164.6.3.9.2.1.10ColumnqosFlowMappingFromVlanIdread-createcurrentThis attribute determines the first VLAN ID value to compare with in a range. It is relevant only in case the vlanId bit (3) in qosFlowMappingCriteria equals 1.
1.3.6.1.4.1.164.6.3.9.2.1.11ColumnqosFlowMappingToVlanIdread-createcurrentThis attribute determines the last VLAN ID value to compare with in a range. It is relevant only in case the vlanId bit (3) in qosFlowMappingCriteria equals 1.
1.3.6.1.4.1.164.6.3.9.2.1.12ColumnqosFlowMappingFromSrcMacAddrread-createcurrentThis attribute determines the first source MAC address to compare with in a range. It is relevant only in case the macSrcAddr bit (4) in qosFlowMappingCriteria…
1.3.6.1.4.1.164.6.3.9.2.1.13ColumnqosFlowMappingToSrcMacAddrread-createcurrentThis attribute determines the last source MAC address to compare with in a range. It is relevant only in case the macSrcAddr bit (4) in qosFlowMappingCriteria …
1.3.6.1.4.1.164.6.3.9.2.1.14ColumnqosFlowMappingFromDestMacAddrread-createcurrentThis attribute determines the first destination MAC address to compare with in a range. It is relevant only in case the macDestAddr (5) bit in qosFlowMappingCr…
1.3.6.1.4.1.164.6.3.9.2.1.15ColumnqosFlowMappingToDestMacAddrread-createcurrentThis attribute determines the last destination MAC address to compare with in a range. It is relevant only in case the macDestAddr (5) bit in qosFlowMappingCri…
1.3.6.1.4.1.164.6.3.9.2.1.16ColumnqosFlowMappingFromSrcIpAddrread-createcurrentThis attribute determines the first source IP address to compare with in a range. It is relevant only in case the ipSrcAddr (6) bit in qosFlowMappingCriteria e…
1.3.6.1.4.1.164.6.3.9.2.1.17ColumnqosFlowMappingToSrcIpAddrread-createcurrentThis attribute determines the last source IP address to compare with in a range. It is relevant only in case the ipSrcAddr (6) bit in qosFlowMappingCriteria eq…
1.3.6.1.4.1.164.6.3.9.2.1.18ColumnqosFlowMappingFromDestIpAddrread-createcurrentThis attribute determines the first destination IP address to compare with in a range. It is relevant only in case the ipDestAddr (7) bit in qosFlowMappingCrit…
1.3.6.1.4.1.164.6.3.9.2.1.19ColumnqosFlowMappingToDestIpAddrread-createcurrentThis attribute determines the last destination IP address to compare with in a range. It is relevant only in case the ipDestAddr (7) bit in qosFlowMappingCrite…
1.3.6.1.4.1.164.6.3.9.2.1.20ColumnqosFlowMappingFromTcpSrcPortread-createcurrentThis attribute determines the first TCP source port to compare with in a range. It is relevant only in case the tcpSrcPort bit (8) in qosFlowMappingCriteria eq…
1.3.6.1.4.1.164.6.3.9.2.1.21ColumnqosFlowMappingToTcpSrcPortread-createcurrentThis attribute determines the last TCP source port to compare with in a range. It is relevant only in case the tcpSrcPort bit (8) in qosFlowMappingCriteria equ…
1.3.6.1.4.1.164.6.3.9.2.1.22ColumnqosFlowMappingFromTcpDestPortread-createcurrentThis attribute determines the first TCP destination port to compare with in a range. It is relevant only in case the tcpDestPort bit (9) in qosFlowMappingCrite…
1.3.6.1.4.1.164.6.3.9.2.1.23ColumnqosFlowMappingToTcpDestPortread-createcurrentThis attribute determines the last TCP destination port to compare with in a range. It is relevant only in case the tcpDestPort bit (9) in qosFlowMappingCriter…
1.3.6.1.4.1.164.6.3.9.2.1.24ColumnqosFlowMappingFromUdpSrcPortread-createcurrentThis attribute determines the first UDP source port to compare with in a range. It is relevant only in case the udpSrcPort bit (10) in qosFlowMappingCriteria e…
1.3.6.1.4.1.164.6.3.9.2.1.25ColumnqosFlowMappingToUdpSrcPortread-createcurrentThis attribute determines the last UDP source port to compare with in a range. It is relevant only in case the udpSrcPort bit (10) in qosFlowMappingCriteria eq…
1.3.6.1.4.1.164.6.3.9.2.1.26ColumnqosFlowMappingFromUdpDestPortread-createcurrentThis attribute determines the first UDP destination port to compare with in a range. It is relevant only in case the udpDestPort bit (11) in qosFlowMappingCrit…
1.3.6.1.4.1.164.6.3.9.2.1.27ColumnqosFlowMappingToUdpDestPortread-createcurrentThis attribute determines the last UDP destination port to compare with in a range. It is relevant only in case the udpDestPort bit (11) in qosFlowMappingCrite…
1.3.6.1.4.1.164.6.3.9.2.1.28ColumnqosFlowMappingFromIpPrecedenceread-createcurrentThis attribute determines the first IpPrecedence value to compare with in a range. It is relevant only in case the IpPrecedence bit (12) in qosFlowMappingCrite…
1.3.6.1.4.1.164.6.3.9.2.1.29ColumnqosFlowMappingToIpPrecedenceread-createcurrentThis attribute determines the last IpPrecedence value to compare with in a range. It is relevant only in case the IpPrecedence bit (12) in qosFlowMappingCriter…
1.3.6.1.4.1.164.6.3.9.2.1.30ColumnqosFlowMappingInnerIeee802dot1pread-createcurrentThis attribute determines which TOS values are applicable for that flow. Each bit (0..7) represents a different inner 802.1 P-bit value. Setting '1' to the bit…
1.3.6.1.4.1.164.6.3.9.2.1.31ColumnqosFlowMappingFromInnerVlanIdread-createcurrentThis attribute determines the first inner VLAN ID value to compare with in a range. It is relevant only in case the innerVlanId bit(14) in qosFlowMappingCriter…
1.3.6.1.4.1.164.6.3.9.2.1.32ColumnqosFlowMappingToInnerVlanIdread-createcurrentThis attribute determines the last inner VLAN ID value to compare with in a range. It is relevant only in case the innerVlanId bit(14) in qosFlowMappingCriteri…
1.3.6.1.4.1.164.6.3.10TablecosProfileTablenot-accessiblecurrentClass of Service Profile table. Each profile holds a priority method, and a mappring function that maps the priority values (range according to the method) int…
1.3.6.1.4.1.164.6.3.10.1RowcosProfileEntrynot-accessiblecurrentA conceptual row where each row contains one CoS attributes.
1.3.6.1.4.1.164.6.3.10.1.1ColumncosProfileIndexnot-accessiblecurrentDefines the CoS Profile ID.
1.3.6.1.4.1.164.6.3.10.1.2ColumncosProfileRowStatusread-createcurrentThis attribute is used to create a new row or to delete an existing row in the table.
1.3.6.1.4.1.164.6.3.10.1.3ColumncosProfileCosMethodread-createcurrentDefines the priority method upon CoS mapping is done.
1.3.6.1.4.1.164.6.3.10.1.4ColumncosProfileNameread-createcurrentThis attribute defines the name assigned to CoS profile.
1.3.6.1.4.1.164.6.3.10.1.5ColumncosProfileCosMappingread-createcurrentThis attribute defines the value of the CoS that is assigned for each priority. The number of the valid octets depends upon the priority method selected: Octet…
1.3.6.1.4.1.164.6.3.11NodequeueProfileObjects
1.3.6.1.4.1.164.6.3.11.1TableqProfileTablenot-accessiblecurrentThis table defines the profiles for a cluster of queues.
1.3.6.1.4.1.164.6.3.11.1.1RowqProfileEntrynot-accessiblecurrentA conceptual row where each row contains one Queue Cluster attribute.
1.3.6.1.4.1.164.6.3.11.1.1.1ColumnqProfileIndexnot-accessiblecurrentDefines the Queue Cluster Profile ID.
1.3.6.1.4.1.164.6.3.11.1.1.2ColumnqProfileRowStatusread-createcurrentThis attribute is used to create a new row or to delete an existing row in the table.
1.3.6.1.4.1.164.6.3.11.1.1.3ColumnqProfileNameread-createcurrentThis attribute holds the name of the Queue cluster profile.
1.3.6.1.4.1.164.6.3.11.1.1.4ColumnqProfileNumberOfInternalQread-createcurrentThis attribute holds the number of the internal queue profiles that are pointed by qInternalQProfile.
1.3.6.1.4.1.164.6.3.11.1.1.5ColumnqProfileInternalQProfileread-createcurrentThis attribute holds the indexes to the queue profiles in the qInternalProfileTable. Each couple of octets holds an index to the qInternalProfileTable.
1.3.6.1.4.1.164.6.3.11.2TableqInternalProfileTablenot-accessiblecurrentThis table holds queue profiles.
1.3.6.1.4.1.164.6.3.11.2.1RowqInternalProfileEntrynot-accessiblecurrentA conceptual row where each row contains one Queue attribute.
1.3.6.1.4.1.164.6.3.11.2.1.1ColumnqInternalProfileIndexnot-accessiblecurrentDefines the Queue Profile ID.
1.3.6.1.4.1.164.6.3.11.2.1.2ColumnqInternalProfileRowStatusread-createcurrentThis attribute is used to create a new row or to delete an existing row in the table.
1.3.6.1.4.1.164.6.3.11.2.1.3ColumnqInternalProfileSchedulingread-createcurrentThis attribute determines the queue scheduling method.
1.3.6.1.4.1.164.6.3.11.2.1.4ColumnqInternalProfileWFQWeightread-createcurrentThis attribute determines the weight that each WFQ (Weighted Fair Queue) participant gets. It is applicable only when scheduling is configured to WFQ.
1.3.6.1.4.1.164.6.3.11.2.1.5ColumnqInternalProfileQueueLengthread-createcurrentThis attribute determines the length of the queue.
1.3.6.1.4.1.164.6.3.11.2.1.6ColumnqInternalProfileWredStartDropThreshread-createcurrentThis attribute determines the length that the queue (Start Value) must reach before the packets colored yellow will start being dropped by the WRED (Weighted R…
1.3.6.1.4.1.164.6.3.11.2.1.7ColumnqInternalProfileWredDropAllThreshread-createcurrentThis attribute determines the length that the queue (Stop Value) must reach before the WRED (Weighted Random Early Detection) shaper mechanism stops dropping r…
1.3.6.1.4.1.164.6.3.11.2.1.8ColumnqInternalProfileWredDropProbabilityread-createcurrentThis attribute determines the percentage of packets that are being dropped at the point when the length of the queue reaches the Stop value. So, effectively, t…
1.3.6.1.4.1.164.6.3.11.2.1.9ColumnqInternalProfileRateLimitread-createcurrentThis attribute determines the Rate Limit of the queue in Kbps. Value=0 represents best effort.
1.3.6.1.4.1.164.6.3.11.2.1.10ColumnqInternalProfileShaperProfileread-createcurrentThis attribute defines the Shaper Profile (bwProfileIndex from bwProfileTable) assigned to this qInternalProfile. Valid range of bwProfileIndex for Shaper Prof…
1.3.6.1.4.1.164.6.3.11.3TablequeueGroupTablenot-accessiblecurrentThis table defines the queue groups/blocks,their level and connections between them.
1.3.6.1.4.1.164.6.3.11.3.1RowqueueGroupEntrynot-accessiblecurrentA conceptual row where each row contains one Queue group.
1.3.6.1.4.1.164.6.3.11.3.1.1ColumnqueueGroupNamenot-accessiblecurrentDefines the Queue Group unique name.
1.3.6.1.4.1.164.6.3.11.3.1.2ColumnqueueGroupQBlockLevelnot-accessiblecurrentThis attribute holds the Level of the Queue Block .First level is 1. NA=2^32-1.
1.3.6.1.4.1.164.6.3.11.3.1.3ColumnqueueGroupQBlockIdxnot-accessiblecurrentThis attribute holds the ID of the Queue Block. NA=2^32-1.
1.3.6.1.4.1.164.6.3.11.3.1.4ColumnqueueGroupRowStatusread-createcurrentThis attribute is used to create a new row or to delete an existing row in the table.
1.3.6.1.4.1.164.6.3.11.3.1.5ColumnqueueGroupQBlockProfileread-createcurrentThis attribute defines the Queue profile assigned to this Queue Block. This object points to qProfileIndex in qProfileTable.
1.3.6.1.4.1.164.6.3.11.3.1.6ColumnqueueGroupQBlockShaperProfileread-createcurrentThis attribute defines the Shaper profile assigned to this Queue Block.
1.3.6.1.4.1.164.6.3.11.3.1.7ColumnqueueGroupPointToQBlockread-createcurrentThis attribute defines the Queue Block name of the next Queue Block level that is pointed by this Queue Block.
1.3.6.1.4.1.164.6.3.11.3.1.8ColumnqueueGroupPointToInternalQueueread-createcurrentThis attribute defines the internal queue whithin queueGroupPointToQBlock that is pointed by this Queue Block.
1.3.6.1.4.1.164.6.3.11.3.1.9ColumnqueueGroupQBlockNameread-createcurrentThis attribute holds the name of the Queue Block.
1.3.6.1.4.1.164.6.3.12TablemarkingProfileTablenot-accessiblecurrentMarking profile table. Each profile holds a marking function which converts CoS values to Service Provider priority values.
1.3.6.1.4.1.164.6.3.12.1RowmarkingProfileEntrynot-accessiblecurrentA conceptual row where each row contains one Marking attribute.
1.3.6.1.4.1.164.6.3.12.1.1ColumnmarkingProfileIndexnot-accessiblecurrentDefines the Marking Profile ID.
1.3.6.1.4.1.164.6.3.12.1.2ColumnmarkingProfileRowStatusread-createcurrentThis attribute is used to create a new row or to delete an existing row in the table.
1.3.6.1.4.1.164.6.3.12.1.3ColumnmarkingProfileNameread-createcurrentThis attribute defines the unique name assigned to the Marking profile.
1.3.6.1.4.1.164.6.3.12.1.4ColumnmarkingSpVlanPBitread-createcurrentFor ETX-202A : This attribute defines the value of the SP VLAN P-Bit that is assigned for each CoS: Octet 0 corresponds to CoS = 0 Octet 1 corresponds to CoS =…
1.3.6.1.4.1.164.6.3.12.1.5ColumnmarkingProfileMethodread-createcurrentThis attribute defines the method upon which marking is done.
1.3.6.1.4.1.164.6.4NoderadTransport
1.3.6.1.4.1.164.6.4.1NoderadTransportDomains
1.3.6.1.4.1.164.6.4.1.1IdentityradTransportDomainSnmpEfmOamcurrentThe SNMP over EFM OAM transport domain. The corresponding transport address is of type RadTransportAddressEfmOam for EFM OAM addresses (port).
1.3.6.1.4.1.164.7NoderadStkHub
1.3.6.1.4.1.164.11NoderadRouter
1.3.6.1.4.1.164.11.7NodertrBridge
1.3.6.1.4.1.164.11.7.2Nodewebranger
1.3.6.1.4.1.164.11.7.2.1NodewrSysConfig
1.3.6.1.4.1.164.11.7.2.1.1ScalarwrBraodcastCtrlCmdread-writecurrentThis parameter is a command to the webranger CPU. It enables blocking or forwarding broadcast frames, which may cause a trigger to a connection. block (1) - bl…
1.3.6.1.4.1.164.11.7.2.1.2ScalarwrFrSelfLearningModeread-writecurrentThis parameter enables the webranger to learn the DLCi's configuration and maintanance protocol. off - will get the configuration by setting it. on - disables …
1.3.6.1.4.1.164.11.7.2.1.3ScalarwrGratuitousArpread-writecurrentThis parameter enables/disables the Gratuitous ARP feature. When enabled, the feature means: when receiving ARP with sender's Source IP Address that already ex…
1.3.6.1.4.1.164.11.7.2.2NodewrIpRouterInfo
1.3.6.1.4.1.164.11.7.2.2.1NodewrConfigIpDhcp
1.3.6.1.4.1.164.11.7.2.2.1.1ScalarwrDhcpActionread-writecurrentActivating (disable/enable) DHCP server operation. Since DHCP Server and DHCP Relay cannot reside in same device, DHCP Relay may be enabled (per interface), on…
1.3.6.1.4.1.164.11.7.2.2.1.2TablewrDhcpTablenot-accessiblecurrentA list of DHCP entries. The number of entries is up to DHCP current entries, according to the WEBRANger model.
1.3.6.1.4.1.164.11.7.2.2.1.2.1RowwrDhcpEntrynot-accessiblecurrentDHCP parameters per entry of the DHCP table.
1.3.6.1.4.1.164.11.7.2.2.1.2.1.1ColumnwrDhcpLowIpAddressread-createcurrentDHCP Low Ip Address.
1.3.6.1.4.1.164.11.7.2.2.1.2.1.2ColumnwrDhcpHighIpAddressread-createcurrentDHCP High Ip Address.
1.3.6.1.4.1.164.11.7.2.2.1.2.1.3ColumnwrDhcpIpMaskAddressread-createcurrentIP mask Address.
1.3.6.1.4.1.164.11.7.2.2.1.2.1.4ColumnwrDhcpDefaultGatewayread-createcurrentDefault Gateway's IP Address.
1.3.6.1.4.1.164.11.7.2.2.1.2.1.5ColumnwrDhcpPrimaryDNSread-createcurrentPrimary DNS.
1.3.6.1.4.1.164.11.7.2.2.1.2.1.6ColumnwrDhcpSecondaryDNSread-createcurrentSecondary DNS.
1.3.6.1.4.1.164.11.7.2.2.1.2.1.7ColumnwrDhcpInterfaceread-createcurrentThe IP addresse allocation is done according to the interface type from which the DHCP request arrives.
1.3.6.1.4.1.164.11.7.2.2.1.2.1.8ColumnwrDhcpRowStatusread-createcurrentThis attribute allows to create/delete a row in this table. For creating a row, the NMS should set wrDhcpRowStatus.id = active(1). For destroying a row, the NM…
1.3.6.1.4.1.164.11.7.2.2.1.2.1.9ColumnwrDhcpIpAddressLeaseTimeread-createcurrentAllocated IP Address lease time in seconds. A zero value specifies no time limitation.
1.3.6.1.4.1.164.11.7.2.2.1.2.1.10ColumnwrDhcpPoolNameread-createcurrentDHCP pool name - string with max length of 10 characters
1.3.6.1.4.1.164.11.7.2.2.1.2.1.11ColumnwrDhcpTftpServerIpread-createcurrentDHCP pool - TFTP-server IP Address.
1.3.6.1.4.1.164.11.7.2.2.1.2.1.12ColumnwrDhcpConfigFileNameread-createcurrentTFTP-name of the configuration File Name for DHCP pool.
1.3.6.1.4.1.164.11.7.2.2.1.3TabledhcpPoolAllocTablenot-accessiblecurrentA list of DHCP Pool Allocation entries. Each entry (row) consist of a single IP Address belonging to DHCP pool whose lowest IP address is dhcpPoolAllocLowIpAdd…
1.3.6.1.4.1.164.11.7.2.2.1.3.1RowdhcpPoolAllocEntrynot-accessiblecurrentDHCP Pool Allocation parameters per entry of the DHCP Pool Allocation table.
1.3.6.1.4.1.164.11.7.2.2.1.3.1.1ColumndhcpPoolAllocLowIpAddressread-onlycurrentLowest IP address of this pool, value eqaul to wrDhcpLowIpAddress for the pool.
1.3.6.1.4.1.164.11.7.2.2.1.3.1.2ColumndhcpPoolAllocLeasingIpAddressread-onlycurrentSingle IP Address belonging to dhcp pool whose Lowest Ip Address is dhcpPoolAllocLowIpAddress. This IP address may be offered for leasing or may be leased by H…
1.3.6.1.4.1.164.11.7.2.2.1.3.1.3ColumndhcpPoolAllocMacAddressread-onlycurrentMAC Address to which the IP address has been leased
1.3.6.1.4.1.164.11.7.2.2.1.3.1.4ColumndhcpPoolAllocTimeLeftread-onlycurrentIP address leasing time left in seconds
1.3.6.1.4.1.164.11.7.2.2.1.3.1.5ColumndhcpPoolAllocFlagsread-onlycurrentThese flags indicates status of each IP address. User may change value to free, via dhcpPoolAllocFreeCmd
1.3.6.1.4.1.164.11.7.2.2.1.3.1.6ColumndhcpPoolAllocFreeCmdread-writecurrentSetting this attribute to On (3), will enforce the agent to Free this entry. The Agent will change the value of this MIB object to off(2) automatically, after …
1.3.6.1.4.1.164.11.7.2.2.1.4TabledhcpRelayTablenot-accessiblecurrentA list of DHCP relay entries.
1.3.6.1.4.1.164.11.7.2.2.1.4.1RowdhcpRelayEntrynot-accessiblecurrentDHCP Relay parameters per entry of the DHCP relay table.
1.3.6.1.4.1.164.11.7.2.2.1.4.1.1ColumndhcpRelayActionread-writecurrentSetting this attribute to enable (3), will enable DHCP Relay action for this interface (Only if DHCP Server is disabled for device - wrDhcpAction=disable). dhc…
1.3.6.1.4.1.164.11.7.2.2.1.4.1.2ColumndhcpRelayServerIpAddressread-writecurrentDHCP Server IP Address.
1.3.6.1.4.1.164.11.7.2.2.1.4.1.3ColumndhcpRelayMaxHopread-writecurrentMaximum number of hops till DHCP Server. upper limit is 16 hops
1.3.6.1.4.1.164.11.7.2.2.1.5ScalarwrDhcpPortread-writecurrentThis parameter defines the port that DHCP flow will be actiavted.
1.3.6.1.4.1.164.11.7.2.2.1.6TabledhcpClientTablenot-accessiblecurrentA list of DHCP client entries.
1.3.6.1.4.1.164.11.7.2.2.1.6.1RowdhcpClientEntrynot-accessiblecurrentDHCP Client parameters per entry of the DHCP Client table.
1.3.6.1.4.1.164.11.7.2.2.1.6.1.1ColumndhcpClientActionread-writecurrentThis parameter default value is enable(3). Setting this attribute to disable (2), will disable DHCP Client action for this interface. This parameter can be cha…
1.3.6.1.4.1.164.11.7.2.2.1.6.1.2ColumndhcpClientServerIpAddressread-writecurrentDHCP Server IP Address.
1.3.6.1.4.1.164.11.7.2.2.1.6.1.3ColumndhcpClientLeaseExpirationTimeread-onlycurrentThis parameter holds the time (in minutes) left until lease expiration.
1.3.6.1.4.1.164.11.7.2.2.1.6.1.4ColumndhcpClientStatusread-onlycurrentThis parametr displays the DHCP status.
1.3.6.1.4.1.164.11.7.2.2.1.7TabledhcpIfClientTablenot-accessiblecurrentDHCP client entries for each Interface.
1.3.6.1.4.1.164.11.7.2.2.1.7.1RowdhcpIfClientEntrynot-accessiblecurrentDHCP Clients per entry of the DHCP Interface Client table.
1.3.6.1.4.1.164.11.7.2.2.1.7.1.2ColumndhcpIfClientIpAddressread-createcurrentDHCP Client IP Address.
1.3.6.1.4.1.164.11.7.2.2.1.7.1.3ColumndhcpIfClientRowStatusread-createcurrentThe row status used for creating, modifying, and deleting instances of the columnar objects in the dhcpIfClientTable. For Vmux Devices, it will be possible onl…
1.3.6.1.4.1.164.11.7.2.2.1.8ScalardhcpServerActionread-writecurrentThis variable enables the operator to perform one of the specified actions on the Server. deleteAllClients (3) is an option that is used for a device functioni…
1.3.6.1.4.1.164.11.7.2.2.2NodewrConfigIpDNS
1.3.6.1.4.1.164.11.7.2.2.2.1ScalarwrDNSRelayActionread-writecurrentWhen Enabled, device will act as a DNS Relay: whenever the device receives a DNS request from its host, it will forward it to the DNS server as if the request …
1.3.6.1.4.1.164.11.7.2.3NodewrConfigIpxRouterInfo
1.3.6.1.4.1.164.11.7.2.3.1ScalarwrAutoLearnLanIpxNetsread-writecurrentActivating (disable/enable) the auto-learn operation.
1.3.6.1.4.1.164.11.7.2.3.2TablewrLanIpxNetTablenot-accessiblecurrentLan IPX nets Table.
1.3.6.1.4.1.164.11.7.2.3.2.1RowwrLanIpxNetEntrynot-accessiblecurrentIPX Nets per frame type & LAN port. The table entries will be created by the agent
1.3.6.1.4.1.164.11.7.2.3.2.1.1ColumnwrLanifIndexread-onlycurrentLAN port ifIndex.
1.3.6.1.4.1.164.11.7.2.3.2.1.2ColumnwrLanIpxFrameTyperead-onlycurrentFrame Type
1.3.6.1.4.1.164.11.7.2.3.2.1.3ColumnwrIpxNetAddressread-writecurrentNet address per Frame Type & LAN port.
1.3.6.1.4.1.164.11.7.2.3.3ScalarwrDialInIpxNetread-writecurrentNet address through a link.
1.3.6.1.4.1.164.11.7.2.3.4TableripSapIfConfTablenot-accessiblecurrentA list of Interfaces which require separate configuration in RIP/SAP.
1.3.6.1.4.1.164.11.7.2.3.4.1RowripSapIfConfEntrynot-accessiblecurrentA Single Routing Domain in a single Subnet.
1.3.6.1.4.1.164.11.7.2.3.4.1.1ColumnripSapIfConfIfIndexread-onlycurrentThe interface ifIndex.
1.3.6.1.4.1.164.11.7.2.3.4.1.2ColumnripSapIfConfModeread-createcurrentThe ifIndex RIP/SAP mode.
1.3.6.1.4.1.164.11.7.2.3.4.1.3ColumnripSapIfConfStatusread-createcurrentThis attribute allows to create/delete a row in this table. For creating a row, the NMS should set ripSapIfConfStatus.id1 = active(1). For destroying a row, th…
1.3.6.1.4.1.164.11.7.2.4NodewrInterface
1.3.6.1.4.1.164.11.7.2.4.1TablewrIpAddressTablenot-accessiblecurrentLink IP addresses Table.
1.3.6.1.4.1.164.11.7.2.4.1.1RowwrIpAddressEntrynot-accessiblecurrentIp Address per Link
1.3.6.1.4.1.164.11.7.2.4.1.1.1ColumnwrIpIfIndexread-onlycurrentPort interface index.
1.3.6.1.4.1.164.11.7.2.4.1.1.2ColumnwrIpAddressread-createcurrentLink IP Address.
1.3.6.1.4.1.164.11.7.2.4.1.1.3ColumnwrIpMaskread-createcurrentLink IP mask Address.
1.3.6.1.4.1.164.11.7.2.4.1.1.4ColumnwrIpRowStatusread-createcurrentThis attribute allows to create/delete a row in this table. For creating a row, the NMS should set wrIpRowStatus.id1 = active(1). For destroying a row, the NMS…
1.3.6.1.4.1.164.11.7.2.4.2TablewrSpoofingTablenot-accessiblecurrentSpoofing Table.
1.3.6.1.4.1.164.11.7.2.4.2.1RowwrSpoofingEntrynot-accessiblecurrentSpoofing per Link
1.3.6.1.4.1.164.11.7.2.4.2.1.1ColumnwrSpoofingIfIndexread-onlycurrentPort interface index.
1.3.6.1.4.1.164.11.7.2.4.2.1.2ColumnwrSpoofingActionread-createcurrent
1.3.6.1.4.1.164.11.7.2.4.2.1.3ColumnwrSpoofingAgingStationread-createcurrent
1.3.6.1.4.1.164.11.7.2.4.2.1.4ColumnwrSpoofingRowStatusread-createcurrentThis attribute allows to create/delete a row in this table. For creating a row, the NMS should set wrSpoofingRowStatus.id1 = active(1). For destroying a row, t…
1.3.6.1.4.1.164.11.7.2.4.3TablewrLanIfTablenot-accessiblecurrentLink IP addresses Table.
1.3.6.1.4.1.164.11.7.2.4.3.1RowwrLanIfEntrynot-accessiblecurrentIp Address per Link
1.3.6.1.4.1.164.11.7.2.4.3.1.1ColumnwrLanIfIndexread-onlycurrentPort interface index.
1.3.6.1.4.1.164.11.7.2.4.3.1.2ColumnwrLanBridgeRouterModeread-writecurrentThis parameter indicates whether the link is Bridge or Router and specifies the Router's type.
1.3.6.1.4.1.164.11.7.2.4.3.1.3ColumnwrLanIfStateread-writecurrentThe LAN is disabled or enabled. For LAN 2 it can be also 'redundancy'.
1.3.6.1.4.1.164.11.7.2.4.3.1.4ColumnwrLanIfRdnTimeoutread-writecurrentLAN Redundancy Timeout in seconds. Applicable when wrLanIfState=redundancy.
1.3.6.1.4.1.164.11.7.2.4.4TablewrSyncCnfgTablenot-accessiblecurrentConfiguration table for Async interface.
1.3.6.1.4.1.164.11.7.2.4.4.1RowwrSyncCnfgEntrynot-accessiblecurrentConfiguration table
1.3.6.1.4.1.164.11.7.2.4.4.1.1ColumnwrSyncIfIndexread-onlycurrentSync interface index.
1.3.6.1.4.1.164.11.7.2.4.4.1.2ColumnwrSyncClkModeread-writecurrentClock Mode.
1.3.6.1.4.1.164.11.7.2.4.4.1.3ColumnwrSyncClkRateread-writecurrentClock Rate in. Rate can be changed if Clock Mode is Program only.
1.3.6.1.4.1.164.11.7.2.4.5TablewrFrCnfgTablenot-accessiblecurrentConfiguration table for Fr parameters that do not exist in RFC2115.
1.3.6.1.4.1.164.11.7.2.4.5.1RowwrFrCnfgEntrynot-accessiblecurrentConfiguration entry for Fr parameters that do not exist in RFC2115.
1.3.6.1.4.1.164.11.7.2.4.5.1.1ColumnwrFrDlciLearningModeread-writecurrentThis parameter enables the webranger to learn the DLCi's configuration and maintanance protocol for the current interface. off - the WR will read the user's co…
1.3.6.1.4.1.164.11.7.2.4.5.1.2ColumnwrFrCllmMessagesread-writecurrentThis parameter enables/disables the Webranger to Tx/Rx CLLM (Consolidated Link Layer Management) messages via DLCI 1023. The CLLM messages are link layer contr…
1.3.6.1.4.1.164.12NoderadAtm
1.3.6.1.4.1.164.12.2NodeatmGen
1.3.6.1.4.1.164.12.2.1NodeatmPerfHistory
1.3.6.1.4.1.164.12.2.1.1NodeatmIfPerformance
1.3.6.1.4.1.164.12.2.1.1.1TableatmIfDataTablenot-accessiblecurrentThe ATM interface Data table.
1.3.6.1.4.1.164.12.2.1.1.1.1RowatmIfDataEntrynot-accessiblecurrentAn entry in the ATM interface Data table.
1.3.6.1.4.1.164.12.2.1.1.1.1.1ColumnatmIfTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the near end current error- measurement period.
1.3.6.1.4.1.164.12.2.1.1.1.1.2ColumnatmIfValidIntervalsread-onlycurrentThe number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 h…
1.3.6.1.4.1.164.12.2.1.1.1.1.3ColumnatmIfTxCellsread-onlycurrentThe counter associated with the total number of transmitted cells, encountered by an ATM interface.
1.3.6.1.4.1.164.12.2.1.1.1.1.4ColumnatmIfRxCellsread-onlycurrentThe counter associated with the total number of received cells, encountered by an ATM interface.
1.3.6.1.4.1.164.12.2.1.1.1.1.5ColumnatmIfUncorrectedHecsread-onlycurrentThe counter associated with the total number of cells with uncorrected HEC errors, encountered by an ATM interface.
1.3.6.1.4.1.164.12.2.1.1.2TableatmIfCurrentTablenot-accessiblecurrentThe ATM interface Current table.
1.3.6.1.4.1.164.12.2.1.1.2.1RowatmIfCurrentEntrynot-accessiblecurrentAn entry in the ATM interface Current table.
1.3.6.1.4.1.164.12.2.1.1.2.1.1ColumnatmIfCurrentTxCellsread-onlycurrentThe counter associated with the number of transmitted cells, encountered by an ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.2.1.2ColumnatmIfCurrentRxCellsread-onlycurrentThe counter associated with the number of received cells, encountered by an ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.2.1.3ColumnatmIfCurrentCorrectedHecsread-onlycurrentThe counter associated with the number of cells with corrected HEC errors, encountered by an ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.2.1.4ColumnatmIfCurrentUncorrectedHecsread-onlycurrentThe counter associated with the number of cells with uncorrected HEC errors, encountered by an ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.2.1.5ColumnatmIfCurrentHecErrorSecondsread-onlycurrentThe counter associated with the number of seconds with HEC errors, encountered by an ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.3TableatmIfIntervalTablenot-accessiblecurrentThe ATM interface Interval table.
1.3.6.1.4.1.164.12.2.1.1.3.1RowatmIfIntervalEntrynot-accessiblecurrentAn entry in the ATM interface Interval table.
1.3.6.1.4.1.164.12.2.1.1.3.1.1ColumnatmIfIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.1.3.1.2ColumnatmIfIntervalTxCellsread-onlycurrentThe counter associated with the number of transmitted cells , encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.1.3.1.3ColumnatmIfIntervalRxCellsread-onlycurrentThe counter associated with the number of received cells, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.1.3.1.4ColumnatmIfIntervalCorrectedHecsread-onlycurrentThe counter associated with the number of cells with corrected HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, int…
1.3.6.1.4.1.164.12.2.1.1.3.1.5ColumnatmIfIntervalUncorrectedHecsread-onlycurrentThe counter associated with the number of cells with uncorrected HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, i…
1.3.6.1.4.1.164.12.2.1.1.3.1.6ColumnatmIfIntervalHecErrorSecondsread-onlycurrentThe counter associated with the number of seconds with HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2NodeatmPvcPerformance
1.3.6.1.4.1.164.12.2.1.2.1NodeatmVpPerformance
1.3.6.1.4.1.164.12.2.1.2.1.1TableatmVpCurrentTablenot-accessiblecurrentThe ATM VP Current table.
1.3.6.1.4.1.164.12.2.1.2.1.1.1RowatmVpCurrentEntrynot-accessiblecurrentAn entry in the ATM VP Current table.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.1ColumnatmVpCurrentVpiread-onlycurrentThe VPI of the VPL.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.2ColumnatmVpCurrentRxCellsClp01read-onlycurrentThe counter associated with the number of transmitted cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.3ColumnatmVpCurrentRxCellsClp0read-onlycurrentThe counter associated with the number of received cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.4ColumnatmVpCurrentGcra0Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA0, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.5ColumnatmVpCurrentGcra1Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA1, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.6ColumnatmVpCurrentRxAISread-onlycurrentThe counter associated with the number of received AIS cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.7ColumnatmVpCurrentTxAISread-onlycurrentThe counter associated with the number of transmitted AIS cells, encountered by the VPL of this ATM interface in the current 15 minute interval. Not Supported …
1.3.6.1.4.1.164.12.2.1.2.1.1.1.8ColumnatmVpCurrentRxRDIread-onlycurrentThe counter associated with the number of received RDI cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.9ColumnatmVpCurrentTxRDIread-onlycurrentThe counter associated with the number of transmitted RDI cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.10ColumnatmVpCurrentContinuityLossread-onlycurrentThe counter associated with the number of loss of continuity cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.11ColumnatmVpCurrentUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.12ColumnatmVpCurrentSESread-onlycurrentThe counter associated with the number of Severerly Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.13ColumnatmVpCurrentCDCread-onlycurrentAmount of cells dropped in the current 15 minute interval of the VP connection.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.14ColumnatmVpCurrentTotalDiscardsread-onlycurrentThe total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.15ColumnatmVpCurrentClp0Discardsread-onlycurrentThe total number of valid ATM cells received with CLP=0 and discarded by the traffic policing entity.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.16ColumnatmVpCurrentTotalCellOutsread-onlycurrentThe total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.17ColumnatmVpCurrentClp0CellOutsread-onlycurrentThe total number of valid ATM cells transmitted with CLP=0 by this VPL.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.18ColumnatmVpCurrentTaggedOutsread-onlycurrentThe total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.19ColumnatmVpCurrentPCRread-onlycurrentThe maximum traffic rate encountered in the last interval of the VP connection (monitored once a second).
1.3.6.1.4.1.164.12.2.1.2.1.1.1.20ColumnatmVpCurrentSCRread-onlycurrentThe average traffic rate during the last interval of the VP connection.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.21ColumnatmVpCurrentMCRread-onlycurrentMCR - The minimum traffic rate encountered in the last interval of the VP connection (monitored once a second).
1.3.6.1.4.1.164.12.2.1.2.1.1.1.22ColumnatmVpCurrentShaperTotalDiscardsread-onlycurrentThe total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.23ColumnatmVpCurrentShaperClp0Discardsread-onlycurrentThe total number of CLP0 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.24ColumnatmVpCurrentShaperClp1Discardsread-onlycurrentThe total number of CLP1 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.1.2TableatmVpPMCurrentTablenot-accessiblecurrentThe ATM VP Current table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.1.2.1RowatmVpPMCurrentEntrynot-accessiblecurrentAn entry in the ATM VP Current table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.1ColumnatmVpPMCurrentVpiread-onlycurrentThe VPI of the VPL.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.2ColumnatmVpPMCurrentDirread-onlycurrentThe direction of performance management.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.3ColumnatmVpPMCurrentTxClp01read-onlycurrentThe counter associated with the number of transmitted CLP 0+1 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.4ColumnatmVpPMCurrentTxClp0read-onlycurrentThe counter associated with the number of transmitted CLP 0 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.5ColumnatmVpPMCurrentRxClp01read-onlycurrentThe counter associated with the number of received CLP 0+1 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.6ColumnatmVpPMCurrentRxClp0read-onlycurrentThe counter associated with the number of received CLP 0 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.7ColumnatmVpPMCurrentErroredCellsread-onlycurrentThe counter associated with the number of errored cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.8ColumnatmVpPMCurrentLostCellsread-onlycurrentThe counter associated with the number of lost cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.9ColumnatmVpPMCurrentMisinsertedCellsread-onlycurrentThe counter associated with the number of misinserted cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.10ColumnatmVpPMCurrentECBread-onlycurrentThe counter associated with the number of ECB, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.11ColumnatmVpPMCurrentSECBread-onlycurrentThe counter associated with the number of SECB, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.12ColumnatmVpPMCurrentESread-onlycurrentThe counter associated with the number of Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.13ColumnatmVpPMCurrentSESread-onlycurrentThe counter associated with the number of Severely Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.14ColumnatmVpPMCurrentUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.15ColumnatmVpPMCurrentIntervalQualityread-onlycurrentIf the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.16ColumnatmVpPMCurrentLastDayQualityread-onlycurrentIf the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded.
1.3.6.1.4.1.164.12.2.1.2.1.3TableatmVpIntervalTablenot-accessiblecurrentThe ATM Vp Interval table.
1.3.6.1.4.1.164.12.2.1.2.1.3.1RowatmVpIntervalEntrynot-accessiblecurrentAn entry in the ATM Vp Interval table.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.1ColumnatmVpIntervalVpiread-onlycurrentThe VPI of the VPL.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.2ColumnatmVpIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.2.1.3.1.3ColumnatmVpIntervalRxCellsClp01read-onlycurrentThe counter associated with the number of transmitted cells , encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.4ColumnatmVpIntervalRxCellsClp0read-onlycurrentThe counter associated with the number of received cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.5ColumnatmVpIntervalGcra0Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA0, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.6ColumnatmVpIntervalGcra1Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA1, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.7ColumnatmVpIntervalRxAISread-onlycurrentThe counter associated with the number of received AIS cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.8ColumnatmVpIntervalTxAISread-onlycurrentThe counter associated with the number of transmitted AIS cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.…
1.3.6.1.4.1.164.12.2.1.2.1.3.1.9ColumnatmVpIntervalRxRDIread-onlycurrentThe counter associated with the number of received RDI cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.10ColumnatmVpIntervalTxRDIread-onlycurrentThe counter associated with the number of transmitted RDI cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.11ColumnatmVpIntervalContinuityLossread-onlycurrentThe counter associated with the number of Continuity Loss cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.12ColumnatmVpIntervalUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.13ColumnatmVpIntervalSESread-onlycurrentThe counter associated with the number of Severerly Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interv…
1.3.6.1.4.1.164.12.2.1.2.1.3.1.14ColumnatmVpIntervalCDCread-onlycurrentAmount of cells dropped in the 15 minute interval of the VP connection.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.15ColumnatmVpIntervalTotalDiscardsread-onlycurrentThe total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.16ColumnatmVpIntervalClp0Discardsread-onlycurrentThe total number of valid ATM cells received with CLP=0 an discarded by the traffic policing entity.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.17ColumnatmVpIntervalTotalCellOutsread-onlycurrentThe total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.18ColumnatmVpIntervalClp0CellOutsread-onlycurrentThe total number of valid ATM cells transmitted with CLP=0 by this VPL.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.19ColumnatmVpIntervalTaggedOutsread-onlycurrentThe total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.20ColumnatmVpIntervalPCRread-onlycurrentThe maximum traffic rate encountered in the last interval of the VP connection (monitored once a second) encountered by an ATM interface/VP in one of the previ…
1.3.6.1.4.1.164.12.2.1.2.1.3.1.21ColumnatmVpIntervalSCRread-onlycurrentThe average traffic rate during the last interval of the VP connection , encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, in…
1.3.6.1.4.1.164.12.2.1.2.1.3.1.22ColumnatmVpIntervalMCRread-onlycurrentMCR - The minimum traffic rate encountered in the last interval of the VP connection (monitored once a second) encountered by an ATM interface/VP in one of the…
1.3.6.1.4.1.164.12.2.1.2.1.3.1.23ColumnatmVpIntervalShaperTotalDiscardsread-onlycurrentThe total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.24ColumnatmVpIntervalShaperClp0Discardsread-onlycurrentThe total number of CLP0 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.25ColumnatmVpIntervalShaperClp1Discardsread-onlycurrentThe total number of CLP1 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.1.4TableatmVpPMIntervalTablenot-accessiblecurrentThe ATM Vp Interval table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.1.4.1RowatmVpPMIntervalEntrynot-accessiblecurrentAn entry in the ATM Vp Interval table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.1ColumnatmVpPMIntervalVpiread-onlycurrentThe VPI of the VPL.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.2ColumnatmVpPMIntervalDirread-onlycurrentThe direction of performance management.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.3ColumnatmVpPMIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.2.1.4.1.4ColumnatmVpPMIntervalTxClp01read-onlycurrentThe counter associated with the number of transmitted CLP 0+1 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interv…
1.3.6.1.4.1.164.12.2.1.2.1.4.1.5ColumnatmVpPMIntervalTxClp0read-onlycurrentThe counter associated with the number of transmitted CLP 0 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interval…
1.3.6.1.4.1.164.12.2.1.2.1.4.1.6ColumnatmVpPMIntervalRxClp01read-onlycurrentThe counter associated with the number of received CLP 0+1 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.7ColumnatmVpPMIntervalRxClp0read-onlycurrentThe counter associated with the number of received CLP 0 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.8ColumnatmVpPMIntervalErroredCellsread-onlycurrentThe counter associated with the number of Errored cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.9ColumnatmVpPMIntervalLostCellsread-onlycurrentThe counter associated with the number of Lost cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.10ColumnatmVpPMIntervalMisinsertedCellsread-onlycurrentThe counter associated with the number of Misinserted cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.11ColumnatmVpPMIntervalECBread-onlycurrentThe counter associated with the number of ECBs encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.12ColumnatmVpPMIntervalSECBread-onlycurrentThe counter associated with the number of SECBs encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.13ColumnatmVpPMIntervalESread-onlycurrentThe counter associated with the number of Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.14ColumnatmVpPMIntervalSESread-onlycurrentThe counter associated with the number of Severely Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interva…
1.3.6.1.4.1.164.12.2.1.2.1.4.1.15ColumnatmVpPMIntervalUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.16ColumnatmVpPMIntervalQualityread-onlycurrentIf the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.17ColumnatmVpPMIntervalLastDayQualityread-onlycurrentIf the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded.
1.3.6.1.4.1.164.12.2.1.2.1.5TableatmVpQoSTablenot-accessiblecurrentThe VP QoS table.
1.3.6.1.4.1.164.12.2.1.2.1.5.1RowatmVpQoSEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.2.1.2.1.5.1.1ColumnatmVpQoSPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 2 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received…
1.3.6.1.4.1.164.12.2.1.2.1.5.1.2ColumnatmVpQoSElapsedTimeread-onlycurrentElapsed Time in seconds. - for atmVpQoSPeriodRef = currentPeriod: The period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAll…
1.3.6.1.4.1.164.12.2.1.2.1.5.1.3ColumnatmVpQoSUASread-onlycurrentNumber of Unavailable Seconds for the reference period (atmVpQoSPeriodRef).
1.3.6.1.4.1.164.12.2.1.2.1.6TableatmVpPMQoSTablenot-accessiblecurrentThe PM VP QoS table.
1.3.6.1.4.1.164.12.2.1.2.1.6.1RowatmVpPMQoSEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.2.1.2.1.6.1.1ColumnatmVpPMQoSDirectionread-onlycurrentThe direction of performance management.
1.3.6.1.4.1.164.12.2.1.2.1.6.1.2ColumnatmVpPMQoSPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 5 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received…
1.3.6.1.4.1.164.12.2.1.2.1.6.1.3ColumnatmVpPMQoSCLRread-onlycurrentCell Loss Ratio counter for the reference period (atmVpPMQoSPeriodRef)- defined in accordance with I.356 , in %. The value will be multipuled by 100.
1.3.6.1.4.1.164.12.2.1.2.1.6.1.4ColumnatmVpPMQoSCERread-onlycurrentCell Error Ratio counter for the reference period (atmVpPMQoSPeriodRef) defined in accordance with I.356 , in %. The value will be multipuled by 100.
1.3.6.1.4.1.164.12.2.1.2.1.6.1.5ColumnatmVpPMQoSCMRread-onlycurrentCell Misinsertion Ratio counter for the reference period (atmVpPMQoSPeriodRef) defined in accordance with I.356 , cells/sec .
1.3.6.1.4.1.164.12.2.1.2.1.7TableatmVpShaperStatTablenot-accessiblecurrentThe ATM VP shaper statistics table.
1.3.6.1.4.1.164.12.2.1.2.1.7.1RowatmVpShaperStatEntrynot-accessiblecurrentAn entry in the ATM VP shaper statistics table.
1.3.6.1.4.1.164.12.2.1.2.1.7.1.1ColumnatmVpShaperDiscardedread-onlycurrentThe number of Cells that were discarded in the shaper on that VPC due to buffer overflow. This counter counts till it reaches its MAX value (20 bits) and then …
1.3.6.1.4.1.164.12.2.1.2.1.7.1.2ColumnatmVpShaperOccupationread-onlycurrentThe number of Cells that are currently stored in the buffer. This parameter is limited to 20 bits.
1.3.6.1.4.1.164.12.2.1.2.1.7.1.3ColumnatmVpShaperMaxOccupationread-onlycurrentThe Maximum number of Cells that were stored in the buffer, since this VP was activated. This parameter is limited to 20 bits.
1.3.6.1.4.1.164.12.2.1.2.1.7.1.4ColumnatmVpShaperLevelread-onlycurrentThe occupation of the buffer according to a predefined threshold. empty - buffer is Empty full - buffer is Full below - buffer is Below the threshold above - b…
1.3.6.1.4.1.164.12.2.1.2.1.7.1.5ColumnatmVpShaperEpdDroppedread-onlycurrentThe number of Cells that were dropped in the shaper on that VPC due to EPD\PPD mechanism in the last second. This parameter is limited to 24 bits. Applicable f…
1.3.6.1.4.1.164.12.2.1.2.1.7.1.6ColumnatmVpShaperTotalEpdDroppedread-onlycurrentThe Total number of Cells that were dropped in the shaper on that VPC due to EPD\PPD mechanism in the last 15 minutes. This counter automatically reset itself …
1.3.6.1.4.1.164.12.2.1.2.2NodeatmVcPerformance
1.3.6.1.4.1.164.12.2.1.2.2.1TableatmVcCurrentTablenot-accessiblecurrentThe ATM VC Current table.
1.3.6.1.4.1.164.12.2.1.2.2.1.1RowatmVcCurrentEntrynot-accessiblecurrentAn entry in the ATM VC Current table.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.1ColumnatmVcCurrentVpiread-onlycurrentThe VPI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.2ColumnatmVcCurrentVciread-onlycurrentThe VCI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.3ColumnatmVcCurrentRxCellsClp01read-onlycurrentThe counter associated with the number of transmitted cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.4ColumnatmVcCurrentRxCellsClp0read-onlycurrentThe counter associated with the number of received cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.5ColumnatmVcCurrentGcra0Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA0, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.6ColumnatmVcCurrentGcra1Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA1, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.7ColumnatmVcCurrentRxAISread-onlycurrentThe counter associated with the number of received AIS cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.8ColumnatmVcCurrentTxAISread-onlycurrentThe counter associated with the number of transmitted AIS cells, encountered by the VCL of this ATM interface in the current 15 minute interval. Not Supported …
1.3.6.1.4.1.164.12.2.1.2.2.1.1.9ColumnatmVcCurrentRxRDIread-onlycurrentThe counter associated with the number of received RDI cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.10ColumnatmVcCurrentTxRDIread-onlycurrentThe counter associated with the number of transmitted RDI cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.11ColumnatmVcCurrentContinuityLossread-onlycurrentThe counter associated with the number of loss of continuity cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.12ColumnatmVcCurrentUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.13ColumnatmVcCurrentSESread-onlycurrentThe counter associated with the number of Severerly Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.14ColumnatmVcCurrentCDCread-onlycurrentAmount of cells dropped in the current 15 minute interval of the VC connection.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.15ColumnatmVcCurrentTotalDiscardsread-onlycurrentThe total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.16ColumnatmVcCurrentClp0Discardsread-onlycurrentThe total number of valid ATM cells received with CLP=0 an discarded by the traffic policing entity.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.17ColumnatmVcCurrentTotalCellOutsread-onlycurrentThe total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.18ColumnatmVcCurrentClp0CellOutsread-onlycurrentThe total number of valid ATM cells transmitted with CLP=0 by this VPL.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.19ColumnatmVcCurrentTaggedOutsread-onlycurrentThe total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.20ColumnatmVcCurrentPCRread-onlycurrentThe maximum traffic rate encountered in the last interval of the VC connection (monitored once a second).
1.3.6.1.4.1.164.12.2.1.2.2.1.1.21ColumnatmVcCurrentSCRread-onlycurrentThe average traffic rate during the last interval of the VC connection.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.22ColumnatmVcCurrentMCRread-onlycurrentMCR - The minimum traffic rate encountered in the last interval of the VC connection (monitored once a second).
1.3.6.1.4.1.164.12.2.1.2.2.1.1.23ColumnatmVcCurrentShaperTotalDiscardsread-onlycurrentThe total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.24ColumnatmVcCurrentShaperClp0Discardsread-onlycurrentThe total number of CLP0 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.25ColumnatmVcCurrentShaperClp1Discardsread-onlycurrentThe total number of CLP1 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.2.2TableatmVcPMCurrentTablenot-accessiblecurrentThe ATM VC Current table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.2.1RowatmVcPMCurrentEntrynot-accessiblecurrentAn entry in the ATM VC Current table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.1ColumnatmVcPMCurrentVpiread-onlycurrentThe VPI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.2ColumnatmVcPMCurrentVciread-onlycurrentThe VCI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.3ColumnatmVcPMCurrentDirread-onlycurrentThe direction of Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.4ColumnatmVcPMCurrentTxClp01read-onlycurrentThe counter associated with the number of transmitted CLP 0+1 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.5ColumnatmVcPMCurrentTxClp0read-onlycurrentThe counter associated with the number of transmitted CLP 0 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.6ColumnatmVcPMCurrentRxClp01read-onlycurrentThe counter associated with the number of received CLP 0+1 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.7ColumnatmVcPMCurrentRxClp0read-onlycurrentThe counter associated with the number of received CLP 0 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.8ColumnatmVcPMCurrentErroredCellsread-onlycurrentThe counter associated with the number of errored cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.9ColumnatmVcPMCurrentLostCellsread-onlycurrentThe counter associated with the number of lost cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.10ColumnatmVcPMCurrentMisinsertedCellsread-onlycurrentThe counter associated with the number of misinserted cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.11ColumnatmVcPMCurrentECBread-onlycurrentThe counter associated with the number of ECBs encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.12ColumnatmVcPMCurrentSECBread-onlycurrentThe counter associated with the number of SECBs encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.13ColumnatmVcPMCurrentESread-onlycurrentThe counter associated with the number of Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.14ColumnatmVcPMCurrentSESread-onlycurrentThe counter associated with the number of Severely Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.15ColumnatmVcPMCurrentUASread-onlycurrentThe counter associated with the number of Severely Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.16ColumnatmVcPMCurrentIntervalQualityread-onlycurrentIf the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.17ColumnatmVcPMCurrentLastDayQualityread-onlycurrentIf the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded.
1.3.6.1.4.1.164.12.2.1.2.2.3TableatmVcIntervalTablenot-accessiblecurrentThe ATM Vc Interval table.
1.3.6.1.4.1.164.12.2.1.2.2.3.1RowatmVcIntervalEntrynot-accessiblecurrentAn entry in the ATM Vc Interval table.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.1ColumnatmVcIntervalVpiread-onlycurrentThe VPI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.2ColumnatmVcIntervalVciread-onlycurrentThe VCI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.3ColumnatmVcIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.2.2.3.1.4ColumnatmVcIntervalRxCellsClp01read-onlycurrentThe counter associated with the number of transmitted cells , encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.5ColumnatmVcIntervalRxCellsClp0read-onlycurrentThe counter associated with the number of received cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.6ColumnatmVcIntervalGcra0Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA0, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.7ColumnatmVcIntervalGcra1Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA1, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.8ColumnatmVcIntervalRxAISread-onlycurrentThe counter associated with the number of received AIS cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.9ColumnatmVcIntervalTxAISread-onlycurrentThe counter associated with the number of transmitted AIS cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.…
1.3.6.1.4.1.164.12.2.1.2.2.3.1.10ColumnatmVcIntervalRxRDIread-onlycurrentThe counter associated with the number of received RDI cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.11ColumnatmVcIntervalTxRDIread-onlycurrentThe counter associated with the number of transmitted RDI cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.12ColumnatmVcIntervalContinuityLossread-onlycurrentThe counter associated with the number of Continuity Loss cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.13ColumnatmVcIntervalUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.14ColumnatmVcIntervalSESread-onlycurrentThe counter associated with the number of Severerly Errored Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interv…
1.3.6.1.4.1.164.12.2.1.2.2.3.1.15ColumnatmVcIntervalCDCread-onlycurrentAmount of cells dropped in the 15 minute interval of the VC connection.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.16ColumnatmVcIntervalTotalDiscardsread-onlycurrentThe total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.17ColumnatmVcIntervalClp0Discardsread-onlycurrentThe total number of valid ATM cells received with CLP=0 an discarded by the traffic policing entity.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.18ColumnatmVcIntervalTotalCellOutsread-onlycurrentThe total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.19ColumnatmVcIntervalClp0CellOutsread-onlycurrentThe total number of valid ATM cells transmitted with CLP=0 by this VPL.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.20ColumnatmVcIntervalTaggedOutsread-onlycurrentThe total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.21ColumnatmVcIntervalPCRread-onlycurrentThe maximum traffic rate encountered in the last interval of the VC connection (monitored once a second) encountered by an ATM interface/VC in one of the previ…
1.3.6.1.4.1.164.12.2.1.2.2.3.1.22ColumnatmVcIntervalSCRread-onlycurrentThe average traffic rate during the last interval of the VC connection, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, int…
1.3.6.1.4.1.164.12.2.1.2.2.3.1.23ColumnatmVcIntervalMCRread-onlycurrentMCR - The minimum traffic rate encountered in the last interval of the VC connection (monitored once a second) encountered by an ATM interface/VC in one of the…
1.3.6.1.4.1.164.12.2.1.2.2.3.1.24ColumnatmVcIntervalShaperTotalDiscardsread-onlycurrentThe total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.25ColumnatmVcIntervalShaperClp0Discardsread-onlycurrentThe total number of CLP0 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.26ColumnatmVcIntervalShaperClp1Discardsread-onlycurrentThe total number of CLP1 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.2.4TableatmVcPMIntervalTablenot-accessiblecurrentThe ATM Vc Interval table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.4.1RowatmVcPMIntervalEntrynot-accessiblecurrentAn entry in the ATM Vc Interval table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.1ColumnatmVcPMIntervalVpiread-onlycurrentThe VPI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.2ColumnatmVcPMIntervalVciread-onlycurrentThe VCI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.3ColumnatmVcPMIntervalDirread-onlycurrentThe direction of Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.4ColumnatmVcPMIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.2.2.4.1.5ColumnatmVcPMIntervalTxClp01read-onlycurrentThe counter associated with the number of transmitted CLP 0+1 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interv…
1.3.6.1.4.1.164.12.2.1.2.2.4.1.6ColumnatmVcPMIntervalTxClp0read-onlycurrentThe counter associated with the number of transmitted CLP 0 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interval…
1.3.6.1.4.1.164.12.2.1.2.2.4.1.7ColumnatmVcPMIntervalRxClp01read-onlycurrentThe counter associated with the number of received CLP 0+1 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.8ColumnatmVcPMIntervalRxClp0read-onlycurrentThe counter associated with the number of received CLP 0 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.9ColumnatmVcPMIntervalErroredCellsread-onlycurrentThe counter associated with the number of Errored cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.10ColumnatmVcPMIntervalLostCellsread-onlycurrentThe counter associated with the number of Lost cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.11ColumnatmVcPMIntervalMisinsertedCellsread-onlycurrentThe counter associated with the number of Misinserted cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.12ColumnatmVcPMIntervalECBread-onlycurrentThe counter associated with the number of ECBs encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.13ColumnatmVcPMIntervalSECBread-onlycurrentThe counter associated with the number of SECBs encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.14ColumnatmVcPMIntervalESread-onlycurrentThe counter associated with the number of Errored Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.15ColumnatmVcPMIntervalSESread-onlycurrentThe counter associated with the number of Severely Errored Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interva…
1.3.6.1.4.1.164.12.2.1.2.2.4.1.16ColumnatmVcPMIntervalUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.17ColumnatmVcPMIntervalQualityread-onlycurrentIf the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.18ColumnatmVcPMIntervalLastDayQualityread-onlycurrentIf the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded.
1.3.6.1.4.1.164.12.2.1.2.2.6TableatmVcQoSTablenot-accessiblecurrentThe ATM VP QoS table.
1.3.6.1.4.1.164.12.2.1.2.2.6.1RowatmVcQoSEntrynot-accessiblecurrentAn entry in the ATM VP table.
1.3.6.1.4.1.164.12.2.1.2.2.6.1.1ColumnatmVcQoSPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 2 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received…
1.3.6.1.4.1.164.12.2.1.2.2.6.1.2ColumnatmVcQoSElapsedTimeread-onlycurrentElapsed Time in seconds. - for atmVcQoSPeriodRef = currentPeriod: The period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAll…
1.3.6.1.4.1.164.12.2.1.2.2.6.1.3ColumnatmVcQoSUASread-onlycurrentNumber of Unavailable Seconds for the reference period (atmVcQoSPeriodRef).
1.3.6.1.4.1.164.12.2.1.2.2.7TableatmVcPMQoSTablenot-accessiblecurrentThe PM VC QoS table.
1.3.6.1.4.1.164.12.2.1.2.2.7.1RowatmVcPMQoSEntrynot-accessiblecurrentAn entry in the VC PM QoS table.
1.3.6.1.4.1.164.12.2.1.2.2.7.1.1ColumnatmVcPMQoSDirectionread-onlycurrentThe direction of performance management.
1.3.6.1.4.1.164.12.2.1.2.2.7.1.2ColumnatmVcPMQoSPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 5 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received…
1.3.6.1.4.1.164.12.2.1.2.2.7.1.3ColumnatmVcPMQoSCLRread-onlycurrentCell Loss Ratio counter for the reference period (atmVcPMQoSPeriodRef)- defined in accordance with I.356 , in %. The value will be multipuled by 100.
1.3.6.1.4.1.164.12.2.1.2.2.7.1.4ColumnatmVcPMQoSCERread-onlycurrentCell Error Ratio counter for the reference period (atmVcPMQoSPeriodRef) defined in accordance with I.356 , in %. The value will be multipuled by 100.
1.3.6.1.4.1.164.12.2.1.2.2.7.1.5ColumnatmVcPMQoSCMRread-onlycurrentCell Miss-insertion Ratio counter for the reference period (atmVcPMQoSPeriodRef) defined in accordance with I.356 , cells/sec .
1.3.6.1.4.1.164.12.2.1.2.2.8TableatmVcShaperStatTablenot-accessiblecurrentThe ATM VC shaper statistics table.
1.3.6.1.4.1.164.12.2.1.2.2.8.1RowatmVcShaperStatEntrynot-accessiblecurrentAn entry in the ATM VC shaper statistics table.
1.3.6.1.4.1.164.12.2.1.2.2.8.1.1ColumnatmVcShaperDiscardedread-onlycurrentThe number of Cells that were discarded in the shaper on that VCC due to buffer overflow. This counter counts till it reaches its MAX value (20 bits) and then …
1.3.6.1.4.1.164.12.2.1.2.2.8.1.2ColumnatmVcShaperOccupationread-onlycurrentThe number of Cells that are currently stored in the buffer. This parameter is limited to 20 bits.
1.3.6.1.4.1.164.12.2.1.2.2.8.1.3ColumnatmVcShaperMaxOccupationread-onlycurrentThe Maximum number of Cells that were stored in the buffer, since this VC was activated. This parameter is limited to 20 bits.
1.3.6.1.4.1.164.12.2.1.2.2.8.1.4ColumnatmVcShaperLevelread-onlycurrentThe occupation of the buffer according to a predefined threshold. empty - buffer is Empty full - buffer is Full below - buffer is Below the threshold above - b…
1.3.6.1.4.1.164.12.2.1.2.2.8.1.5ColumnatmVcShaperEpdDroppedread-onlycurrentThe number of Cells that were dropped in the shaper on that VCC due to EPD\PPD mechanism in the last second. This parameter is limited to 24 bits. Applicable f…
1.3.6.1.4.1.164.12.2.1.2.2.8.1.6ColumnatmVcShaperTotalEpdDroppedread-onlycurrentThe Total number of Cells that were dropped in the shaper on that VPC due to EPD\PPD mechanism in the last 15 minutes. This counter automatically reset itself …
1.3.6.1.4.1.164.12.2.1.3TableatmIntervalDateTablenot-accessiblecurrentThe agent will keep in this group the date & time corresponding to each interval.
1.3.6.1.4.1.164.12.2.1.3.1RowatmIntervalDateEntrynot-accessiblecurrentThe date & time for the given interval.
1.3.6.1.4.1.164.12.2.1.3.1.1ColumnatmIntervalDateIntervalread-onlycurrentThe interval number defining this entry.
1.3.6.1.4.1.164.12.2.1.3.1.2ColumnatmIntervalDateDateread-onlycurrentThe date corresponding to this interval.
1.3.6.1.4.1.164.12.2.1.3.1.3ColumnatmIntervalDateTimeread-onlycurrentThe time corresponding to this interval.
1.3.6.1.4.1.164.12.2.2NodeatmGenSystem
1.3.6.1.4.1.164.12.2.2.1NodeatmGenSysGen
1.3.6.1.4.1.164.12.2.2.1.1TableatmGenSysSelfTestTablenot-accessiblecurrentA table containing the results of the initial testing of the device.
1.3.6.1.4.1.164.12.2.2.1.1.1RowatmGenSysSelfTestEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.2.2.1.1.1.1ColumnatmGenSysSelfTestIndexread-onlycurrentA running index for the table.
1.3.6.1.4.1.164.12.2.2.1.1.1.2ColumnatmGenSysSelfTestResultread-onlycurrentThe results of the initial testing of the device.
1.3.6.1.4.1.164.12.2.2.1.1.1.3ColumnatmGenSysSelfTestModuleread-onlycurrentThe name of module on which the test was performed.
1.3.6.1.4.1.164.12.2.2.1.2ScalaratmGenSysLogClearAllread-writecurrentSetting the variable to clear(3) removes all entries in the Log Buffer of the agent. The agent will immediately reset the variable to off(2).
1.3.6.1.4.1.164.12.2.2.1.3TableatmGenSysLogTablenot-accessiblecurrentA copy of the log buffer.
1.3.6.1.4.1.164.12.2.2.1.3.1RowatmGenSysLogEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.2.2.1.3.1.1ColumnatmGenSysLogIndexread-onlycurrentThe index of the log buffer.
1.3.6.1.4.1.164.12.2.2.1.3.1.2ColumnatmGenSysLogMessageread-onlycurrentThe log buffer entry message text.
1.3.6.1.4.1.164.12.2.2.1.4ScalaratmGenSysSetDefaultConfgread-writecurrentWhen set to on(3), the agent will set all the configuration parameters to their default values. The variable is then reset to off(2) by the agent. The agent mu…
1.3.6.1.4.1.164.12.2.2.1.5TableatmGenSysCxRefTablenot-accessiblecurrentA Cross Reference table. The table maintains an index of an object which is also the table index, and a counter that indicates how many times this object was r…
1.3.6.1.4.1.164.12.2.2.1.5.1RowatmGenSysCxRefEntrynot-accessiblecurrentThe entries will be added by the agent upon an entry addition in the referenced tables (TD table, FR Descriptor etc.)
1.3.6.1.4.1.164.12.2.2.1.5.1.1ColumnatmGenSysCxRefIndexread-onlycurrentThe index specifies an entry in the table of the object.
1.3.6.1.4.1.164.12.2.2.1.5.1.2ColumnatmGenSysCxRefCounterread-onlycurrentThe counter counts the number of references that have been made to the object .
1.3.6.1.4.1.164.12.3NodeatmNte
1.3.6.1.4.1.164.12.3.0IdentityatmNteEventscurrentThe events for RAD ATM products.
1.3.6.1.4.1.164.12.3.0.1NotificationatmAceStatusChangecurrentThe trap is sent every time there is a change in the state of one of the LEDs.
1.3.6.1.4.1.164.12.3.0.2NotificationatmAceAlarmTrapcurrentThe trap is sent whenever there is a transition from a no alarm state to a state with at least one active alarm. An active alarm state exists if: 1) The atmInt…
1.3.6.1.4.1.164.12.3.0.3NotificationatmAceModuleChangeTrapcurrentThe trap is sent every time a module is changed (Hot swapping). The second variable will be atmNteCardType to indicate the type of card that was inserted. The …
1.3.6.1.4.1.164.12.3.0.4NotificationatmAceRedundancyTrapcurrentThe trap is sent upon change in link as a result of redundancy. The ifIndex parameter indicates the current active link.
1.3.6.1.4.1.164.12.3.0.5NotificationatmAceModuleMismatchTrapcurrentThe trap is sent upon starting or stopping of a module mismatch state. A possible mismatch is when the inserted module is other than the programmed one.
1.3.6.1.4.1.164.12.3.1NodeatmNteSys
1.3.6.1.4.1.164.12.3.1.1NodeatmNteSysConfig
1.3.6.1.4.1.164.12.3.1.1.1TableatmNteManagerTablenot-accessiblecurrentThe Manager Table includes all the NMSs that receive traps from this agent. A single manager can receive traps on more than one PVC. The agent will set implici…
1.3.6.1.4.1.164.12.3.1.1.1.1RowatmNteManagerEntrynot-accessiblecurrentA single manager and the PVC for receiving traps.
1.3.6.1.4.1.164.12.3.1.1.1.1.1ColumnatmNteManagerIPread-onlycurrentThe IP address of the NMS.
1.3.6.1.4.1.164.12.3.1.1.1.1.2ColumnatmNteManagerPvcread-onlycurrentA PVC index. The range is 1..8. There are four PVCs on the User Port and four PVCs on the Network Port. The default VPI, VCI values are specified below.
1.3.6.1.4.1.164.12.3.1.1.1.1.3ColumnatmNteManagerIfIndexread-createcurrentThe ATM interface index of the management port.
1.3.6.1.4.1.164.12.3.1.1.1.1.4ColumnatmNteManagerVpiread-createcurrentThe VPI of the management VCL. Default: 0.
1.3.6.1.4.1.164.12.3.1.1.1.1.5ColumnatmNteManagerVciread-createcurrentThe VCI of the management VCL. Defaults: 32,33,34,35.
1.3.6.1.4.1.164.12.3.1.1.1.1.6ColumnatmNteManagerTrapMaskread-createcurrentThe value of this attribute determines the type of traps the agent should mask and not send to this NMS. The value is differently determined for different prod…
1.3.6.1.4.1.164.12.3.1.1.1.1.7ColumnatmNteManagerRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.12.3.1.1.1.1.8ColumnatmNteManagerNextHopread-createcurrentThis parameter is relevant to Ethernet out of band host only (PVC=10). The Next Hop IP address of the entry route.
1.3.6.1.4.1.164.12.3.1.1.1.1.9ColumnatmNteManagerVlanSupportread-createcurrentVLAN support (Tagging). no - No support to VLAN. yes - 4 VLAN bytes will be added to the frame.
1.3.6.1.4.1.164.12.3.1.1.1.1.10ColumnatmNteManagerVlanIdentifierread-createcurrentVLAN ID. Range is 0..4095.
1.3.6.1.4.1.164.12.3.1.1.1.1.11ColumnatmNteManagerVlanFramePriorityread-createcurrentVLAN Frame priority.Range is 0..7.
1.3.6.1.4.1.164.12.3.1.1.1.1.12ColumnatmNteManagerAlarmTrapMaskread-createcurrentThe value of this object determines the alarm traps that the agent should mask and not send to this NMS. The value is an Octet String, where each bit is assign…
1.3.6.1.4.1.164.12.3.1.1.1.1.13ColumnatmNteManagerConfigPortsread-createcurrentThis variable defines from which port/s this manager can configure the device. For IPmux 11 the value of this variable will be according to the ports combinati…
1.3.6.1.4.1.164.12.3.1.1.2ScalaratmNteUPLTCRread-writecurrentThe Unacceptable ES Limit threshold for Performance Management.
1.3.6.1.4.1.164.12.3.1.1.3ScalaratmNteDPLTCRread-writecurrentThe Degraded ES Limit threshold for Performance Management.
1.3.6.1.4.1.164.12.3.1.1.4ScalaratmNteSysLogClearAllread-writecurrentSetting the variable to clear(3) removes all entries in the Log Buffer of the agent. The agent will immediately reset the variable to off(2).
1.3.6.1.4.1.164.12.3.1.1.5ScalaratmNteUSESLTCRread-writecurrentThe Unacceptable SES Limit threshold for Performance Management.
1.3.6.1.4.1.164.12.3.1.1.6ScalaratmNteDSESLTCRread-writecurrentThe Degraded ES Limit threshold for Performance Management.
1.3.6.1.4.1.164.12.3.1.1.8NodeatmNteProtection
1.3.6.1.4.1.164.12.3.1.1.8.1ScalaratmNteProtectionModeread-writecurrentProtection Mode. MspOn - Multiplex section protection. pathOn - High order path protection. mspUniOn - Multiplex section Uni-directional protection. mspOneToN …
1.3.6.1.4.1.164.12.3.1.1.8.2ScalaratmNteProtectionWorkingLinkread-writecurrentSelects the working link when atmNteProtectionMode is off.
1.3.6.1.4.1.164.12.3.1.1.8.3ScalaratmNteProtectionSwitchLinkread-writecurrentForceSwitch - will force Switching from the working link to the backup link. Afterwards the agent will set atmNteProtectionSwitchLink back to off(1). atmNtePro…
1.3.6.1.4.1.164.12.3.1.1.9NodeatmNteConfOam
1.3.6.1.4.1.164.12.3.1.1.9.1ScalaratmNteConfOamSupportread-writecurrentOAM support mode, which determines the device location in a segment wise.
1.3.6.1.4.1.164.12.3.1.1.9.2NodeatmNteConfOamTransmission
1.3.6.1.4.1.164.12.3.1.1.9.2.1ScalaratmNteConfOamAISread-writecurrentDefines if a F4 segment OAM cell is transmitted due to problems in the other port, i.e. physical layer alarm or F4 defect. This is valid only when the ACE101 h…
1.3.6.1.4.1.164.12.3.1.1.9.2.2ScalaratmNteConfOamRDIread-writecurrentDefines if an F4 OAM RDI cell is transmitted due to physical layer problems in the port (in addition to F4 RDI cells transmitted due to ATM layer problems). Th…
1.3.6.1.4.1.164.12.3.1.1.9.3NodeatmNteConfOamAddressing
1.3.6.1.4.1.164.12.3.1.1.9.3.1ScalaratmNteConfLoopbackAddModeread-writecurrentLoopback addressing mode. on - will enable loopback addressing. off - will disable loopback addressing.
1.3.6.1.4.1.164.12.3.1.1.9.3.2ScalaratmNteConfLoopbackSourceAddread-writecurrentLoopback source address. This field is relevant when atmNteConfOamAddMode is on.
1.3.6.1.4.1.164.12.3.1.1.9.4TableatmNteConfOamIfTablenot-accessiblecurrentOAM support per ATM interface.
1.3.6.1.4.1.164.12.3.1.1.9.4.1RowatmNteConfOamIfEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.3.1.1.9.4.1.1ColumnatmNteConfOamIfAisRdiread-writecurrentThis parameter controls the generation of F4/F5 AIS and RDI due to lower order problems such as physical layer problems. For AIS: Defines if F4/F5 AIS cell is …
1.3.6.1.4.1.164.12.3.1.1.10NodeatmNteConfCAC
1.3.6.1.4.1.164.12.3.1.1.10.1ScalaratmNteConfCACModeread-writecurrentCAC support mode. For ACE2002, the following are the applicable values: disable(1), enable(2), 10 - 1000.
1.3.6.1.4.1.164.12.3.1.1.11TableatmNteHostIfTablenot-accessiblecurrentHost IP interface table.
1.3.6.1.4.1.164.12.3.1.1.11.1RowatmNteHostIfEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.3.1.1.11.1.1ColumnatmNteHostPvcIndexread-onlycurrentA PVC index. The range is 1..10.
1.3.6.1.4.1.164.12.3.1.1.11.1.2ColumnatmNteHostIPread-createcurrentThe host interface IP address.
1.3.6.1.4.1.164.12.3.1.1.11.1.3ColumnatmNteHostMaskread-createcurrentThe host interface subnet mask.
1.3.6.1.4.1.164.12.3.1.1.11.1.4ColumnatmNteHostAtmIfIndexread-createcurrentATM interface index. Will be 1 for user port, and 2 for network port.
1.3.6.1.4.1.164.12.3.1.1.11.1.5ColumnatmNteHostVpiread-createcurrentVPI of the PVC connected to that host interface.
1.3.6.1.4.1.164.12.3.1.1.11.1.6ColumnatmNteHostVciread-createcurrentVCI of the PVC connected to that host interface.
1.3.6.1.4.1.164.12.3.1.1.11.1.7ColumnatmNteHostRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.12.3.1.1.11.1.8ColumnatmNteHostRdnVpiread-createcurrentThe VPI of the redundant management VCL. This parameter is applicable only if atmNteRdnManagement=enable(3).
1.3.6.1.4.1.164.12.3.1.1.11.1.9ColumnatmNteHostRdnVciread-createcurrentThe VCI of the redundant management VCL. This parameter is applicable only if atmNteRdnManagement=enable(3).
1.3.6.1.4.1.164.12.3.1.1.11.1.10ColumnatmNteHostDefaultNextHopread-createcurrentThe host interface Default Next Hop address. This address will be used as default next hop for every Bundle mapped to this Host.
1.3.6.1.4.1.164.12.3.1.1.11.1.11ColumnatmNteHostVlanTaggingread-createcurrentVLAN Tag support. no - No support to VLAN. yes - 4 VLAN bytes will be added to each frame connected to this Host.
1.3.6.1.4.1.164.12.3.1.1.11.1.12ColumnatmNteHostDefaultVlanIDread-createcurrentDefault VLAN ID of this Host.
1.3.6.1.4.1.164.12.3.1.1.11.1.13ColumnatmNteHostDefaultVlanPriorityread-createcurrentDefault VLAN priority for this Host.
1.3.6.1.4.1.164.12.3.1.1.12ScalaratmNteShaperModeread-writecurrentShaper Mode. vpInbandMng - Vcc within a Vp for management.
1.3.6.1.4.1.164.12.3.1.1.13ScalaratmNteOutputRateread-writecurrentAggregate shaping output rate in Cells per Seconds units. Default value is the Network port rate.
1.3.6.1.4.1.164.12.3.1.1.14ScalaratmNteTosModeread-writecurrentTOS Mode.
1.3.6.1.4.1.164.12.3.1.1.15ScalaratmNteTosMaskread-writecurrentThis parameter determines the seqence of bits that will be used for TOS. For ACE101 this parameter is applicable only if atmNteTosMode = enable. Valid only for…
1.3.6.1.4.1.164.12.3.1.1.16ScalaratmNteTosHighPriorityread-writecurrentPriorities options are High or Low. High priority will be represented by bit = 1. Low priority will be represented by bit = 0. Each TOS value will be represent…
1.3.6.1.4.1.164.12.3.1.1.17ScalaratmNtePlugAndPlayActivityread-writecurrentActivity control for Manager Plug And Play. disable - disable the feature. offline - Automatic learn IP address into offline memory. online - Automatic learn I…
1.3.6.1.4.1.164.12.3.1.1.18ScalaratmNteSlotUsageread-writecurrentApplicable to ace2002. Slot 2 might be configured as user slot or as network slot.
1.3.6.1.4.1.164.12.3.1.1.19ScalaratmNteConnectionsMaxNumberread-writecurrentThe MAX number of connections supported by system. Setting this parameter will affect the number of MAX intervals supported. This parameter will affect the sys…
1.3.6.1.4.1.164.12.3.1.1.20ScalaratmNteDefaultVpiread-writecurrentDefault Vpi for management.
1.3.6.1.4.1.164.12.3.1.1.21ScalaratmNteDefaultVciread-writecurrentDefault Vci for management.
1.3.6.1.4.1.164.12.3.1.1.22ScalaratmNteReservedVpiread-writecurrentInternal use VPI, where shaperMode=vpInbandMng.
1.3.6.1.4.1.164.12.3.1.1.23ScalaratmNteRdnManagementread-onlycurrentThe redundancy management status.
1.3.6.1.4.1.164.12.3.1.1.24ScalaratmNtePlugAndPlayIfIndexread-writecurrentThe ifIndex of the Plug and Play VCC.
1.3.6.1.4.1.164.12.3.1.1.25ScalaratmNteLoopbackTimeoutread-writecurrentThe Loopback state timeout in minutes. A value of zero means no timeout (for ever). Default is 5 min.
1.3.6.1.4.1.164.12.3.1.1.26TableatmNteOamTablenot-accessiblecurrentThis table is a static table, which is created by agent once upon initialization. The created entries are actually, only the supported OAM features. This table…
1.3.6.1.4.1.164.12.3.1.1.26.1RowatmNteOamEntrynot-accessiblecurrentAn entry in the OAM table. Each entry in this table will indicate a special OAM.
1.3.6.1.4.1.164.12.3.1.1.26.1.1ColumnatmNteOamModeread-onlycurrentThe OAM cell path. endToEnd(1) - the entire path.
1.3.6.1.4.1.164.12.3.1.1.26.1.2ColumnatmNteOamCellTyperead-onlycurrentThis object indicates a unique Indication Signal. aisAndRdi(1) - Alarm Indication Signal (AIS) and Remote Defect Indication (RDI) cell. loopback(2) - Loopback …
1.3.6.1.4.1.164.12.3.1.1.26.1.3ColumnatmNteOamLevelread-onlycurrentThe level of the OAM cell. f5 (3) - VC level.
1.3.6.1.4.1.164.12.3.1.1.26.1.4ColumnatmNteOamEnableread-writecurrentThis parameter determines if the specified OAM cells will be enabled.
1.3.6.1.4.1.164.12.3.1.1.27ScalaratmNteDefaultLoopbackThresholdread-writecurrentThe Default OAM Loopback Failure Threshold value that will be used for configuration.
1.3.6.1.4.1.164.12.3.1.1.28ScalaratmNteMaxBurstSizeread-writecurrentThe Maximum allowed burst size (cell units). This object is applicable for each Physical port.
1.3.6.1.4.1.164.12.3.1.1.29ScalaratmNteGranularityFactorread-writecurrentThis parameter affects the granularity of the guaranteed Rate (SCR+MCR) in spaced connection (cell/sec units). It is also defines the minimum guaranteed rate i…
1.3.6.1.4.1.164.12.3.1.1.30ScalaratmNteTotalInputRateread-onlycurrentThis parameter indicates the total input rate of the device in cells/sec.
1.3.6.1.4.1.164.12.3.1.1.31ScalaratmNteTotalOutputRateread-onlycurrentThis parameter indicates the total output rate of the device in cells/sec.
1.3.6.1.4.1.164.12.3.1.1.32TableatmAlarmForwardingTablenot-accessiblecurrentThe Alarm Forwarding Mechanism will be operated for this table entries.
1.3.6.1.4.1.164.12.3.1.1.32.1RowatmAlarmForwardingEntrynot-accessiblecurrentEach entry in this table is a pair of ports that the Alarm Forwarding Mechanism is determined for.
1.3.6.1.4.1.164.12.3.1.1.32.1.1ColumnatmAlarmForwardingFailPortnot-accessiblecurrentAn Index of the port on which a fail occurs.
1.3.6.1.4.1.164.12.3.1.1.32.1.2ColumnatmAlarmForwardingToPortnot-accessiblecurrentAn Index of the port that will be affected upon the failure of the atmAlarmForwardingFailPort.
1.3.6.1.4.1.164.12.3.1.1.32.1.3ColumnatmAlarmForwardingRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.12.3.1.1.32.1.4ColumnatmAlarmForwardingFailureLevelread-createcurrentThis parameter determines the level of failure that will operate the Alarm Forwarding Mechanism.
1.3.6.1.4.1.164.12.3.1.1.32.1.5ColumnatmAlarmForwardingRecoveryModeread-createcurrentThis parameter determines the Recovery Mode. manual - The user should stop the RDI transmission by using the atmAlarmForwardingRecoveryCommand. automatic - The…
1.3.6.1.4.1.164.12.3.1.1.32.1.6ColumnatmAlarmForwardingRecoveryCommandread-createcurrentThis parameter is a command. It is applicable when atmAlarmForwardingRecoveryMode = manual. on - Will stop the RDI transmission. After setting to 'On' the agen…
1.3.6.1.4.1.164.12.3.1.1.32.1.7ColumnatmAlarmForwardingTimeFilterWindowread-createcurrentThis parameter determines the Time Filter Window, meaning: how much time (in seconds) should the alarm exist in order to start the Alarm Forwarding operation.
1.3.6.1.4.1.164.12.3.1.1.33NodeatmSysConfigCellTest
1.3.6.1.4.1.164.12.3.1.1.33.1ScalaratmSysConfigCellTestPortread-writecurrentAn Index of the port on which the cell test will be sent.
1.3.6.1.4.1.164.12.3.1.1.33.2ScalaratmSysConfigCellTestVpiread-writecurrentThe VPI on which the cell test will be sent.
1.3.6.1.4.1.164.12.3.1.1.33.3ScalaratmSysConfigCellTestVciread-writecurrentThe VCI on which the cell test will be sent.
1.3.6.1.4.1.164.12.3.1.1.33.4ScalaratmSysConfigCellTestPtiread-writecurrentThe cell type.
1.3.6.1.4.1.164.12.3.1.1.33.5ScalaratmSysConfigCellTestClpread-writecurrentThe type of the Cell.
1.3.6.1.4.1.164.12.3.1.1.33.6ScalaratmSysConfigCellTestOamTyperead-writecurrentThe OAM type of the Cell. This object is applicable if atmSysConfigCellTestPti = oamSegment/oamEndToEnd .
1.3.6.1.4.1.164.12.3.1.1.33.7ScalaratmSysConfigCellTestPayloadread-writecurrentThe payload of the cell. For OAM cell the payload is set automatically to 6A.
1.3.6.1.4.1.164.12.3.1.1.33.8ScalaratmSysConfigCellTestQuantityread-writecurrentQuantity of cells to send.
1.3.6.1.4.1.164.12.3.1.1.33.9ScalaratmSysConfigCellTestSendCmdread-writecurrentSetting the variable to send(3) perfroms cell test. The agent will immediately reset the variable to off(2).
1.3.6.1.4.1.164.12.3.1.1.34TableatmVpCrossConnectExtenTablenot-accessiblecurrentAn extension to the ATM VP Cross Connect table (RFC2515 - atmVpCrossConnectTable).
1.3.6.1.4.1.164.12.3.1.1.34.1RowatmVpCrossConnectExtenEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.12.3.1.1.34.1.1ColumnatmVpCrossConnectNameread-createcurrentThe Connection's name.
1.3.6.1.4.1.164.12.3.1.1.35TableatmVcCrossConnectExtenTablenot-accessiblecurrentAn extension to the ATM VC Cross Connect table (RFC2515 - atmVcCrossConnectTable).
1.3.6.1.4.1.164.12.3.1.1.35.1RowatmVcCrossConnectExtenEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.12.3.1.1.35.1.1ColumnatmVcCrossConnectNameread-createcurrentThe Connection's name.
1.3.6.1.4.1.164.12.3.1.1.37ScalaratmNteQosModeread-writecurrentThis variable defines the QoS Mode. disable(1) - QoS is disabled. multipleVc(2) - QoS is enabled and multiple VCs can be bound per bridge port. singleVc(3) - Q…
1.3.6.1.4.1.164.12.3.1.1.38TableatmTrafficDescrParamXTablenot-accessiblecurrentAn Augment to ATM Traffic Descriptor Parameter Table (atmTrafficDescrParamTable in ATM-MIB; RFC-2515).
1.3.6.1.4.1.164.12.3.1.1.38.1RowatmTrafficDescrParamXEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.12.3.1.1.38.1.1ColumnatmTrafficDescrParamModeread-createcurrentThe Mode of the Traffic Descriptor.
1.3.6.1.4.1.164.12.3.1.2NodeatmNteSysInfo
1.3.6.1.4.1.164.12.3.1.2.1TableatmNteIdTablenot-accessiblecurrentThe IDs of the cards and of the system.
1.3.6.1.4.1.164.12.3.1.2.1.1RowatmNteIdEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.3.1.2.1.1.1ColumnatmNteIdIndexread-onlycurrentAn Index of the Unit ID table. The following units have IDs in this table: 1 - System 2 - ATM Board 3 - User Card 4 - Trunk 1 card 5 - Trunk 2 card 6 - Shaper …
1.3.6.1.4.1.164.12.3.1.2.1.1.2ColumnatmNteUnitIdread-onlycurrentThe ID of the Unit. For index = 6, the id will describe the validity of a shaper in the system: 0 - Shaper Not exist 1 - Shaper exist. For index = 7, the id wi…
1.3.6.1.4.1.164.12.3.1.2.1.1.3ColumnatmNteUnitVersionread-onlycurrentHardware and Software version of the module.
1.3.6.1.4.1.164.12.3.1.2.1.1.4ColumnatmNteCardTyperead-onlycurrentThe card type.
1.3.6.1.4.1.164.12.3.1.2.1.1.5ColumnatmNteCardStatusread-onlycurrentStatus of the card in the selected slot. notActive - Connections are in NotReady state. No configuration is available for the card. The access to the card HW i…
1.3.6.1.4.1.164.12.3.1.2.1.1.6ColumnatmNteCardCmdread-writecurrentCommand on the card that is installed in the selected slot. The commands are applicable according to the value of atmNteCardStatus. See the specification docum…
1.3.6.1.4.1.164.12.3.1.2.1.1.7ColumnatmNteProgCardTyperead-writecurrentThe programmed card type.
1.3.6.1.4.1.164.12.3.1.2.2ScalaratmSysPSunitsread-onlycurrentThe number of power supply units.
1.3.6.1.4.1.164.12.3.1.2.3ScalaratmSysPSunitsInUseread-onlycurrentThe main power supply in this unit.
1.3.6.1.4.1.164.12.3.1.2.4ScalaratmSysFanUnitsread-onlycurrentThe number of fan units.
1.3.6.1.4.1.164.12.3.1.2.5ScalaratmSysNetPrtsread-onlycurrentThe number of network ports.
1.3.6.1.4.1.164.12.3.1.2.6ScalaratmSysNetPrtInUseread-onlycurrentThe network port in use.
1.3.6.1.4.1.164.12.3.1.2.7ScalaratmNteBridgingModeread-writecurrentBridging mode can be one of the following: ATM <> Ethernet - Bridging is between the Ethernet port and the ATM port (there is no bridging between VCs). ATM <> …
1.3.6.1.4.1.164.12.3.1.2.8NodeatmSysStats
1.3.6.1.4.1.164.12.3.1.2.8.1ScalaratmSysCurrentCdcread-onlycurrentSeconds in which cells dropped was occured in the current 15 minutes interval.
1.3.6.1.4.1.164.12.3.1.2.8.2TableatmSysIntervalTablenot-accessiblecurrentThe system level Interval table.
1.3.6.1.4.1.164.12.3.1.2.8.2.1RowatmSysIntervalEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.3.1.2.8.2.1.1ColumnatmSysIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.3.1.2.8.2.1.2ColumnatmSysIntervalCdcread-onlycurrentSeconds in which cells dropped was occured in 15 minutes interval.
1.3.6.1.4.1.164.12.3.1.2.9ScalaratmNteEventTyperead-onlycurrentThis parameter identifies the event. On - the problem exist. Off - the problem not exist. InvalidLogin - Invalid login on local console. CorrectLogin - Success…
1.3.6.1.4.1.164.12.3.1.2.10ScalaratmNteIntervalMaxNumberread-onlycurrentThe MAX number of connections intervals supported by system. This parameter value is a function of atmNteConnectionsMaxNumber parameter. This parameter should …
1.3.6.1.4.1.164.12.3.1.2.11ScalaratmNteAlarmTyperead-onlycurrentThis object specifies the type of the alarm.
1.3.6.1.4.1.164.12.3.1.2.12ScalaratmNteLevelread-onlycurrentThis object specifies the ATM level.
1.3.6.1.4.1.164.12.3.1.2.13ScalaratmNteConnectionsNumberread-onlycurrentThis object specifies a quantity of connections.
1.3.6.1.4.1.164.12.3.1.2.14ScalaratmNteTotalLbread-onlycurrentThis parameter counts the total number of end-points that were configured with Loopback (LB).
1.3.6.1.4.1.164.12.3.1.2.15ScalaratmNteTotalCcread-onlycurrentThis parameter counts the total number of end-points that were configured with Continuity Check (CC).
1.3.6.1.4.1.164.12.3.1.2.16ScalaratmNteTotalPmread-onlycurrentThis parameter counts the total number of end-points that were configured with PM.
1.3.6.1.4.1.164.12.3.2NodeatmNtePrt
1.3.6.1.4.1.164.12.3.2.1NodeatmNtePrtConfig
1.3.6.1.4.1.164.12.3.2.1.1TableatmNteConfIfTablenot-accessiblecurrentThe Physical interface configuration table.
1.3.6.1.4.1.164.12.3.2.1.1.1RowatmNteConfIfEntrynot-accessiblecurrentAn entry in the Physical interface configuration table. The ifIndex is of the lowest physical layer.
1.3.6.1.4.1.164.12.3.2.1.1.1.1ColumnatmConfIfTransmitClkread-writecurrentThe transmit clock of the port.
1.3.6.1.4.1.164.12.3.2.1.1.1.2ColumnatmConfIfLoopbackread-writecurrentInterface Loopback.
1.3.6.1.4.1.164.12.3.2.1.1.1.3ColumnatmConfIfFrameTyperead-writecurrentThe frame type. Valid values for a 155M interface: sonet(2), sdh(3). Valid values for a T3 interface: direct(4), plcpInternal(5), plcpExternal(6), directNoScrm…
1.3.6.1.4.1.164.12.3.2.1.1.1.4ColumnatmConfIfCardTyperead-onlydeprecatedThe card type.
1.3.6.1.4.1.164.12.3.2.1.1.1.5ColumnatmConfAtmIfVpiVciLimitread-onlycurrentThe limit on the sum of the VPI+VCI bits for this interface.
1.3.6.1.4.1.164.12.3.2.1.1.1.6ColumnatmConfIfHwFeaturesread-writecurrentHW features command.
1.3.6.1.4.1.164.12.3.2.1.1.1.7ColumnatmConfIfOutputRateread-writecurrentThis parameter indicates the output rate in cells/sec, which is supported per port. Successfully setting this parameter is dependent on all other ports values …
1.3.6.1.4.1.164.12.3.2.1.1.1.8ColumnatmConfIfInputRateread-writecurrentThis parameter indicates the input rate in cells/sec, which is supported per port. Successfully setting this parameter is dependent on all other ports values c…
1.3.6.1.4.1.164.12.3.2.1.1.1.9ColumnatmConfAlarmForwardingread-writecurrentEnables Path AIS Alarm forwarding upon a failure detection. The following might be considered as a failure: LOS, LOF, LOC, SLM, LOP, Path AIS and Line AIS. dis…
1.3.6.1.4.1.164.12.3.2.1.1.1.10ColumnatmConfIfAllocatedBwread-onlycurrentTotal VC Bandwidth Allocation.
1.3.6.1.4.1.164.12.3.2.1.1.1.11ColumnatmConfIfLowerVpiread-writecurrentThe Lower possible VPI.
1.3.6.1.4.1.164.12.3.2.1.1.1.12ColumnatmConfIfOamModeread-writecurrentOAM support Mode, which determines the interface's location in a segment wise.
1.3.6.1.4.1.164.12.3.2.1.1.1.13ColumnatmConfIfOamFailureIndread-writecurrentThis object allows user to define the type of indication (if any) that will be created upon a LB cell failure, for all VCs on which OAM loopback traffic is act…
1.3.6.1.4.1.164.12.3.2.1.2TableatmNteAlarmIfTablenot-accessiblecurrentThe interface Alarm table.
1.3.6.1.4.1.164.12.3.2.1.2.1RowatmNteAlarmIfEntrynot-accessiblecurrentAn entry in the interface Alarm table.
1.3.6.1.4.1.164.12.3.2.1.2.1.1ColumnatmInterfaceActiveAlarmsread-onlycurrentA Bit String of the active alarms on this interface. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. Th…
1.3.6.1.4.1.164.12.3.2.1.2.1.2ColumnatmThresholdSectionBIPread-writecurrentWhen Section BIPs are greater than this threshold, an active alarm is raised. N/A for ds3/e3 interface.
1.3.6.1.4.1.164.12.3.2.1.2.1.3ColumnatmThresholdLineBIPread-writecurrentWhen Line BIPs are greater than this threshold, an active alarm is raised. N/A for ds3/e3 interface.
1.3.6.1.4.1.164.12.3.2.1.2.1.4ColumnatmThresholdLineFEBEread-writecurrentWhen Line FEBEs are greater than this threshold, an active alarm is raised. N/A for ds3/e3 interface.
1.3.6.1.4.1.164.12.3.2.1.2.1.5ColumnatmThresholdPathBIPread-writecurrentWhen Path BIPs are greater than this threshold, an active alarm is raised.
1.3.6.1.4.1.164.12.3.2.1.2.1.6ColumnatmThresholdPathFEBEread-writecurrentWhen Path FEBEs are greater than this threshold, an active alarm is raised.
1.3.6.1.4.1.164.12.3.2.1.2.1.7ColumnatmThresholdErroredCellsread-writecurrentWhen Errored Cells are greater than this threshold, an active alarm is raised.
1.3.6.1.4.1.164.12.3.2.1.2.1.8ColumnatmThresholdLostCellsread-writecurrentWhen Lost Cells are greater than this threshold, an active alarm is raised.
1.3.6.1.4.1.164.12.3.2.1.2.1.9ColumnatmThresholdMisinsertedCellsread-writecurrentWhen Misinserted Cells are greater than this threshold, an active alarm is raised.
1.3.6.1.4.1.164.12.3.2.1.2.1.10ColumnatmInterfaceAlarmStatusread-onlycurrentThe variable is on(3) when there is any active alarm on this interface.
1.3.6.1.4.1.164.12.3.2.1.2.1.11ColumnatmInterfaceMaskAlarmsread-writecurrentA Bit String of alarms mask on this interface. An up bit (1) means that the respective alarm is masked. A down bit (0) means no mask. The mask is supported for…
1.3.6.1.4.1.164.12.3.2.1.3TableatmNteConfVpTablenot-accessiblecurrentThe ATM VP configuration table. The table is an extension to the atmVplTable of RFC-1695.
1.3.6.1.4.1.164.12.3.2.1.3.1RowatmNteConfVpEntrynot-accessiblecurrentAn entry in the ATM VP configuration table. ifIndex of the ATM layer.
1.3.6.1.4.1.164.12.3.2.1.3.1.1ColumnatmConfVpPolicingread-writecurrentPolicing method desired for this VPL.
1.3.6.1.4.1.164.12.3.2.1.3.1.2ColumnatmConfVpCCAdminStatusread-writecurrentup(2) - Activate Continuity Check (CC). down(3) - Deactivate CC. source(4) - Activate OAM CC(Continuity Check) of local agent ( start sending Oam cells to the …
1.3.6.1.4.1.164.12.3.2.1.3.1.3ColumnatmConfVpLoopbackAdminStatusread-writecurrentup(2) - Start loopback OAM cells. down(3) - Stop sending loopback OAM cells. For ace2002: up(2) - Transmitting LB cells with llid all ones (i.e. FFFF..FF) down…
1.3.6.1.4.1.164.12.3.2.1.3.1.4ColumnatmConfVpLoopbackSinkAddressread-writecurrentDestination address. For ace101: 2 bytes are used. For ace2002: 16 bytes are used.
1.3.6.1.4.1.164.12.3.2.1.3.1.5ColumnatmConfVpCongestionControlread-writecurrentEach bit indicates a selection of one option as the following description. All combinations are possible and legal. The codes are: 1 - EPD 2 - CLP 4 - EFCI
1.3.6.1.4.1.164.12.3.2.1.3.1.6ColumnatmConfVpCCDirectionread-writecurrentboth(2) - Agent send OAM CC cells and check received OAM CC cells source(4)- Agent send OAM CC cells. sink(5) - Agent checks received OAM CC cells.
1.3.6.1.4.1.164.12.3.2.1.3.1.7ColumnatmConfVpCreationTimeread-onlycurrentA date-time in which the VP was created.
1.3.6.1.4.1.164.12.3.2.1.3.1.8ColumnatmConfVpOamSupportread-writecurrentOAM support mode, which determines the device location in a segment wise.
1.3.6.1.4.1.164.12.3.2.1.3.1.9ColumnatmConfVpCCOperStatusread-onlycurrentinitial(1) - The CC activation process is not started. source(4) - Agent sends OAM CC cells. sink(5) - Agent checks received OAM CC cells. both (8) - OAM CC of…
1.3.6.1.4.1.164.12.3.2.1.3.1.10ColumnatmConfVpLoopbackTrafficread-writecurrentThis parameter has both command and status meanings: off(2) - Set to 'Off' will Stop traffic loop. Getting this value means that the loop is not running. on (3…
1.3.6.1.4.1.164.12.3.2.1.3.1.11ColumnatmConfVpLoopbackFailureIndread-writecurrentThis object allows user to define the Indication that will be created upon a LB cell failure. disabled(2) - no indication will be created. segmentAis(3) - will…
1.3.6.1.4.1.164.12.3.2.1.3.1.12ColumnatmConfVpLoopbackFailureThresholdread-writecurrentThe number of the LB failures before starting transmission of the Indication defined by atmConfVcLoopbackFailureInd. Range: 1..16. Default: 1.
1.3.6.1.4.1.164.12.3.2.1.3.1.13ColumnatmConfVpOamDirectionread-writecurrentThe direction of OAM cell insertion. downStream(2) - The OAM cell will be inserted in downStream. upStream(3) - The OAM cell will be inserted in upStream.
1.3.6.1.4.1.164.12.3.2.1.3.1.14ColumnatmConfVpOamDescrIndexread-writecurrentThis parameter indicates the VPL's OAM Descriptor index, according to the OAM Descriptor Configuration Table.
1.3.6.1.4.1.164.12.3.2.1.3.1.15ColumnatmConfVpConnectedread-writecurrentThis object indicates whether this VP is connected and if connected, what is it connected to.
1.3.6.1.4.1.164.12.3.2.1.5TableatmNteAlarmVpTablenot-accessiblecurrentThe ATM VP Alarm table.
1.3.6.1.4.1.164.12.3.2.1.5.1RowatmNteAlarmVpEntrynot-accessiblecurrentAn entry in the ATM VP Alarm table. ifIndex of the ATM layer.
1.3.6.1.4.1.164.12.3.2.1.5.1.1ColumnatmNteVpAlarmVpiread-onlycurrentThe VPI on which there is an active alarm.
1.3.6.1.4.1.164.12.3.2.1.5.1.2ColumnatmNteVpActiveAlarmsread-onlycurrentA Bit String of the active alarms on this VP. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. The meani…
1.3.6.1.4.1.164.12.3.2.1.6TableatmNteAlarmVcTablenot-accessiblecurrentThe ATM VC Alarm table.
1.3.6.1.4.1.164.12.3.2.1.6.1RowatmNteAlarmVcEntrynot-accessiblecurrentAn entry in the ATM VC Alarm table. ifIndex of the ATM layer.
1.3.6.1.4.1.164.12.3.2.1.6.1.1ColumnatmNteVcAlarmVpiread-onlycurrentThe VPI of the VC on which there is an active alarm.
1.3.6.1.4.1.164.12.3.2.1.6.1.2ColumnatmNteVcAlarmVciread-onlycurrentThe VCI of the VC on which there is an active alarm.
1.3.6.1.4.1.164.12.3.2.1.6.1.3ColumnatmNteVcActiveAlarmsread-onlycurrentA Bit String of the active alarms on this VC. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. The meani…
1.3.6.1.4.1.164.12.3.2.2NodeatmNteLoopback
1.3.6.1.4.1.164.12.3.2.2.1TableatmLoopbackVpTablenot-accessiblecurrentThis table contains parameters for an OAM VP loopback test.
1.3.6.1.4.1.164.12.3.2.2.1.1RowatmLoopbackVpEntrynot-accessiblecurrentAn entry in table atmLoopbackVpTable.
1.3.6.1.4.1.164.12.3.2.2.1.1.1ColumnatmLoopbackVpIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.2.1.1.2ColumnatmLoopbackVpVpiread-onlycurrentThe VPI of the OAM VPL.
1.3.6.1.4.1.164.12.3.2.2.1.1.3ColumnatmLoopbackVpOperStatusread-onlycurrent-noActive(1) means that the loopback test has not been activated for this VP. -inProgress(2) means that the test has been activated and there is currently no p…
1.3.6.1.4.1.164.12.3.2.2.1.1.4ColumnatmLoopbackVpCDVread-onlycurrentCell Delay Variation for this sampling.
1.3.6.1.4.1.164.12.3.2.2.1.1.5ColumnatmLoopbackVpAverageDelayread-onlycurrentAverage delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.1.1.6ColumnatmLoopbackVpMaxDelayread-onlycurrentMaximum delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.1.1.7ColumnatmLoopbackVpMinDelayread-onlycurrentMinimum delay.
1.3.6.1.4.1.164.12.3.2.2.1.1.8ColumnatmLoopbackVpErrSessionsread-onlycurrentErrored Sessions. Will be updated once in 5 seconds.
1.3.6.1.4.1.164.12.3.2.2.2TableatmLoopbackVcTablenot-accessiblecurrentThis table contains parameters for an OAM VC loopback test.
1.3.6.1.4.1.164.12.3.2.2.2.1RowatmLoopbackVcEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.3.2.2.2.1.1ColumnatmLoopbackVcIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.2.2.1.2ColumnatmLoopbackVcVpiread-onlycurrentThe VPI of the OAM VCL.
1.3.6.1.4.1.164.12.3.2.2.2.1.3ColumnatmLoopbackVcVciread-onlycurrentThe VCI of the OAM VCL.
1.3.6.1.4.1.164.12.3.2.2.2.1.4ColumnatmLoopbackVcOperStatusread-onlycurrent-noActive(1) means that the loopback test has not been activated for this VP. -inProgress(2) means that the test has been activated and there is currently no p…
1.3.6.1.4.1.164.12.3.2.2.2.1.5ColumnatmLoopbackVcCDVread-onlycurrentCell Delay Variation for this sampling.
1.3.6.1.4.1.164.12.3.2.2.2.1.6ColumnatmLoopbackVcAverageDelayread-onlycurrentAverage delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.2.1.7ColumnatmLoopbackVcMaxDelayread-onlycurrentThe maximum delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.2.1.8ColumnatmLoopbackVcMinDelayread-onlycurrentThe minimum delay.
1.3.6.1.4.1.164.12.3.2.2.2.1.9ColumnatmLoopbackVcErrSessionsread-onlycurrentErrored Sessions. Will be updated once in 5 seconds.
1.3.6.1.4.1.164.12.3.2.2.3TableatmLoopbackVpIvlTablenot-accessiblecurrentThis table contains parameters for an OAM VP loopback test, according interval number.
1.3.6.1.4.1.164.12.3.2.2.3.1RowatmLoopbackVpIvlEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.3.2.2.3.1.1ColumnatmLoopbackVpIvlIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.2.3.1.2ColumnatmLoopbackVpIvlVpiread-onlycurrentThe VPI of the OAM VPL.
1.3.6.1.4.1.164.12.3.2.2.3.1.3ColumnatmLoopbackVpIvlIvlread-onlycurrentThe relevant interval number.
1.3.6.1.4.1.164.12.3.2.2.3.1.4ColumnatmLoopbackVpIvlOperStatusread-onlycurrent-noActive(1) means that the loopback test has not been activated for this VP during this interval. -inProgress(2) has no meaning for an ended interval. -failed…
1.3.6.1.4.1.164.12.3.2.2.3.1.5ColumnatmLoopbackVpIvlCDVread-onlycurrentCell Delay Variation for this interval.
1.3.6.1.4.1.164.12.3.2.2.3.1.6ColumnatmLoopbackVpIvlAverageDelayread-onlycurrentAverage delay without including lost cells for this interval.
1.3.6.1.4.1.164.12.3.2.2.3.1.7ColumnatmLoopbackVpIvlMaxDelayread-onlycurrentThe maximum delay without including lost cells for this interval.
1.3.6.1.4.1.164.12.3.2.2.3.1.8ColumnatmLoopbackVpIvlMinDelayread-onlycurrentThe minimum delay for this interval.
1.3.6.1.4.1.164.12.3.2.2.3.1.9ColumnatmLoopbackVpIvlErrSessionsread-onlycurrentErrored Sessions. Will be updated once in 5 seconds.
1.3.6.1.4.1.164.12.3.2.2.4TableatmLoopbackVcIvlTablenot-accessiblecurrentThis table contains parameters for an OAM VC loopback test.
1.3.6.1.4.1.164.12.3.2.2.4.1RowatmLoopbackVcIvlEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.3.2.2.4.1.1ColumnatmLoopbackVcIvlIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.2.4.1.2ColumnatmLoopbackVcIvlVpiread-onlycurrentThe VPI of the OAM VCL.
1.3.6.1.4.1.164.12.3.2.2.4.1.3ColumnatmLoopbackVcIvlVciread-onlycurrentThe VCI of the OAM VCL.
1.3.6.1.4.1.164.12.3.2.2.4.1.4ColumnatmLoopbackVcIvlIvlread-onlycurrentThe relevant interval number.
1.3.6.1.4.1.164.12.3.2.2.4.1.5ColumnatmLoopbackVcIvlOperStatusread-onlycurrent-noActive(1) means that the loopback test has not been activated for this VC during this interval. -inProgress(2) has no meaning per interval. -failed(3) means…
1.3.6.1.4.1.164.12.3.2.2.4.1.6ColumnatmLoopbackVcIvlCDVread-onlycurrentCell Delay Variation for this interval.
1.3.6.1.4.1.164.12.3.2.2.4.1.7ColumnatmLoopbackVcIvlAverageDelayread-onlycurrentAverage delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.4.1.8ColumnatmLoopbackVcIvlMaxDelayread-onlycurrentThe maximum delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.4.1.9ColumnatmLoopbackVcIvlMinDelayread-onlycurrentThe minimum delay.
1.3.6.1.4.1.164.12.3.2.2.4.1.10ColumnatmLoopbackVcIvlErrSessionsread-onlycurrentErrored Sessions. Will be updated once in 5 seconds.
1.3.6.1.4.1.164.12.3.2.3NodeatmNtePM
1.3.6.1.4.1.164.12.3.2.3.1TableatmVpPmTablenot-accessiblecurrentThis table contains parameters for VP performance monitoring.
1.3.6.1.4.1.164.12.3.2.3.1.1RowatmVpPmEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.3.2.3.1.1.1ColumnatmVpPmIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.3.1.1.2ColumnatmVpPmVpiread-onlycurrentThe VPI of the Performance Monitoring VPL.
1.3.6.1.4.1.164.12.3.2.3.1.1.3ColumnatmVpPmAdminStatusread-createcurrentup(2) - Activate PM. down(3) - Deactivate PM. listenToActivationCells(4) - . originateActivationCells(5) - .
1.3.6.1.4.1.164.12.3.2.3.1.1.4ColumnatmVpPmDirectionread-createcurrentThe direction of PM.
1.3.6.1.4.1.164.12.3.2.3.1.1.5ColumnatmVpPmBlockSizeread-createcurrentValid block sizes (in cells): 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768.
1.3.6.1.4.1.164.12.3.2.3.1.1.6ColumnatmVpPmRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.12.3.2.3.1.1.7ColumnatmVpPmSinkread-createcurrentoff (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.
1.3.6.1.4.1.164.12.3.2.3.1.1.8ColumnatmVpPmSourceread-createcurrentoff (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.
1.3.6.1.4.1.164.12.3.2.3.2TableatmVcPmTablenot-accessiblecurrentThis table contains parameters for VC performance monitoring.
1.3.6.1.4.1.164.12.3.2.3.2.1RowatmVcPmEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.3.2.3.2.1.1ColumnatmVcPmIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.3.2.1.2ColumnatmVcPmVpiread-onlycurrentThe VPI of the Performance Monitoring VCL.
1.3.6.1.4.1.164.12.3.2.3.2.1.3ColumnatmVcPmVciread-onlycurrentThe VCI of the PM VCL.
1.3.6.1.4.1.164.12.3.2.3.2.1.4ColumnatmVcPmAdminStatusread-createcurrentup(2) - Activate PM. down(3) - Deactivate PM. listenToActivationCells(4) - . originateActivationCells(5) - .
1.3.6.1.4.1.164.12.3.2.3.2.1.5ColumnatmVcPmDirectionread-createcurrentThe direction of PM.
1.3.6.1.4.1.164.12.3.2.3.2.1.6ColumnatmVcPmBlockSizeread-createcurrentValid block sizes (in cells): 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768.
1.3.6.1.4.1.164.12.3.2.3.2.1.7ColumnatmVcPmRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.12.3.2.3.2.1.8ColumnatmVcPmSinkread-createcurrentoff (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.
1.3.6.1.4.1.164.12.3.2.3.2.1.9ColumnatmVcPmSourceread-createcurrentoff (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.
1.3.6.1.4.1.164.12.3.3NodeatmNteMdl
1.3.6.1.4.1.164.12.3.3.1NodeatmNteMdlConfig
1.3.6.1.4.1.164.12.3.3.1.1TableatmNteMdlConfigTablenot-accessiblecurrentModule configuration table.
1.3.6.1.4.1.164.12.3.3.1.1.1RowatmNteMdlConfigEntrynot-accessiblecurrentThere is an entry in this table just for those modules that have parameters that are relevant to module level only.
1.3.6.1.4.1.164.12.3.3.1.1.1.1ColumnatmNteMdlSlotIndexnot-accessiblecurrentThe slot number.
1.3.6.1.4.1.164.12.3.3.1.1.1.2ColumnatmNteMdlPrtCpuSharingread-writecurrentThis object lets the user decide what will be the CPU sharing between the ports of the module. This object is applicable for modules in which the same CPU hand…
1.3.6.1.4.1.164.12.3.3.1.1.1.3ColumnatmNteMdlInputPriorityMechanismread-writecurrentThis object allows the user to Enable/Disable the Input priority mechanism. This object is applicable for modules with more than one port, in which the total p…
Type Definitions
NameSyntaxStatusDescription
DscpInteger32 (0..63)currentA Differentiated Services Code-Point that may be used for marking a traffic stream.
GenAddressOCTET STRING (SIZE(12))
RadTransportAddressEfmOamOCTET STRING (SIZE (4)) systemsEvents OBJECT-IDENTITY STATUS current DESCRIPTION "The events for RAD products." ::= { systems 0 }currentRepresents a transport address consisting of an EFM OAM port number.
RadTransportAddressTypeINTEGER { unknown(0), efmOam (1) }currentA value that represents a transport domain. This is the enumerated version of the transport domain registrations in this MIB module. It was added in RAD MIB due to the fact that it is not defined in Standard MIB. The en…
SysIfEntityTypeINTEGER
MIB Viewer