RAISECOM-LINKAGGREGATION-MIB
25 objects
The MIB module for managing link aggregation of switch.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8886.6.1.6 | IdentityrcLinkAggregation | The MIB module for managing link aggregation of switch. | ||
| 1.3.6.1.4.1.8886.6.1.6.1 | ScalarrcLinkAggregationStatus | read-write | current | Enable or disable link aggregation. |
| 1.3.6.1.4.1.8886.6.1.6.2 | ScalarrcLinkAggregationLoadSharingMode | read-write | current | The Rule to be applied to this Link Aggregator's Trunk Group Table. The rules are based on the following selections SrcMAC (1), means that the last three bits … |
| 1.3.6.1.4.1.8886.6.1.6.3 | ScalarrcLinkAggregationTicketGenerationAlgorithm | read-write | current | There are two algorithm to generate trunk ticket: direct-map and crc. Direct-map uses the last two bits of mac address as the trunk ticket; Crc uses crc algori… |
| 1.3.6.1.4.1.8886.6.1.6.4 | ScalarrcLinkAggregationMaxGroup | read-only | current | The number of maximum link aggregation group that system supports. |
| 1.3.6.1.4.1.8886.6.1.6.5 | TablercLinkAggregationGroupTable | not-accessible | current | Some ports participate in a link aggregation group. |
| 1.3.6.1.4.1.8886.6.1.6.5.1 | RowrcLinkAggregationGroupEntry | not-accessible | current | The entry is used to set some ports into a link aggregation group. |
| 1.3.6.1.4.1.8886.6.1.6.5.1.1 | ColumnrcLinkAggregationGroupID | not-accessible | current | The link aggregation group ID. |
| 1.3.6.1.4.1.8886.6.1.6.5.1.2 | ColumnrcLinkAggregationGroupSettingPorts | read-write | current | When a bit of PortList is set, the port this bit specified participate in a appointed link aggregation group. |
| 1.3.6.1.4.1.8886.6.1.6.5.1.3 | ColumnrcLinkAggregationGroupCurrentPorts | read-only | current | Show these ports that are in active status in a link aggregation group. |
| 1.3.6.1.4.1.8886.6.1.6.5.1.4 | ColumnrcLinkAggregationGroupMode | read-write | current | Show these ports that are in active status in a link aggregation group. |
| 1.3.6.1.4.1.8886.6.1.6.5.1.5 | ColumnrcLinkAggregationGroupMinLinks | read-write | current | The link aggregation group ID. |
| 1.3.6.1.4.1.8886.6.1.6.5.1.6 | ColumnrcLinkAggregationGroupMaxLinks | read-write | current | The link aggregation group ID. |
| 1.3.6.1.4.1.8886.6.1.6.5.1.7 | ColumnrcLinkAggregationGroupSettingPorts64 | read-write | current | When a bit of PortList is set, the port this bit specified participate in a appointed link aggregation group.It is used when the device has more than 256 ports. |
| 1.3.6.1.4.1.8886.6.1.6.5.1.8 | ColumnrcLinkAggregationGroupCurrentPorts64 | read-only | current | Show these ports that are in active status in a link aggregation group. It is used when the device has more than 256 ports. |
| 1.3.6.1.4.1.8886.6.1.6.5.1.9 | ColumnrcLinkAggregationMasterPort | read-write | current | set master port in a link aggregation group . |
| 1.3.6.1.4.1.8886.6.1.6.5.1.10 | ColumnrcLinkAggregationRestoreMode | read-write | current | set restore mode in a link aggregation group . |
| 1.3.6.1.4.1.8886.6.1.6.5.1.11 | ColumnrcLinkAggregationRestoreDelayTimer | read-write | current | set port delay time from the fault recovery in a link aggregation group . |
| 1.3.6.1.4.1.8886.6.1.6.6 | TablercLinkAggregationPortStatsClearTable | not-accessible | current | Clear link aggregation group stattistics table. |
| 1.3.6.1.4.1.8886.6.1.6.6.1 | RowrcLinkAggregationPortStatsClearEntry | not-accessible | current | The entry is used to clear statistics of a link aggregation group. |
| 1.3.6.1.4.1.8886.6.1.6.6.1.1 | ColumnrcLinkAggregationPortStatsClear | read-write | current | Clear link aggregation group port statistics. |
| 1.3.6.1.4.1.8886.6.1.6.7 | TablercLinkAggregationPortLACPTable | not-accessible | current | Enable or disable LACP table. |
| 1.3.6.1.4.1.8886.6.1.6.7.1 | RowrcLinkAggregationPortLACPEntry | not-accessible | current | The entry is used to enable or disable LACP of a port. |
| 1.3.6.1.4.1.8886.6.1.6.7.1.1 | ColumnrcLinkAggregationPortLACPEnable | read-write | current | Enable or disable LACP. |
| 1.3.6.1.4.1.8886.6.1.6.8 | ScalarrcLinkAggregationDestMacAddress | read-write | current | Specifies the destination MAC address of the provider network LACP PDUs. |