RAISECOM-POE-MIB
26 objects
This MIB module defines objects to POE
Imported Objects
| IF-MIB | rfc3621-power-ethernet InterfaceIndex |
| POWER-ETHERNET-MIB | pethMainPseGroupIndex pethPsePortGroupIndex pethPsePortIndex |
| RAISECOM-BASE-MIB | iscomSwitch |
| SNMPv2-SMI | Unsigned32 |
| SWITCH-TC | EnableVar |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8886.6.1.51 | IdentityrcPoe | This MIB module defines objects to POE | ||
| 1.3.6.1.4.1.8886.6.1.51.1 | TablercPsePortTable | not-accessible | current | POE Interface table |
| 1.3.6.1.4.1.8886.6.1.51.1.1 | RowrcPsePortEntry | not-accessible | current | An entry in the rcPsePortTable. It contains POE status in each interface port. |
| 1.3.6.1.4.1.8886.6.1.51.1.1.1 | ColumnrcPsePortPeakPower | read-only | current | The peak power of the PSE port in milliWatts. |
| 1.3.6.1.4.1.8886.6.1.51.1.1.2 | ColumnrcPsePortAveragePower | read-only | current | The average power of the PSE port in milliWatts. |
| 1.3.6.1.4.1.8886.6.1.51.1.1.3 | ColumnrcPsePortCurrentPower | read-only | current | The current power of the PSE port in milliWatts. |
| 1.3.6.1.4.1.8886.6.1.51.1.1.4 | ColumnrcPsePortCurrentVoltage | read-only | current | The current voltage of the PSE port in Millivolt. |
| 1.3.6.1.4.1.8886.6.1.51.1.1.5 | ColumnrcPsePortCurrent | read-only | current | The current circuit of the PSE port in Milliampere. |
| 1.3.6.1.4.1.8886.6.1.51.1.1.6 | ColumnrcPsePortPowerLimit | read-write | current | The max power of the PSE port in milliWatts.the value is configured by manual. |
| 1.3.6.1.4.1.8886.6.1.51.1.1.7 | ColumnrcPsePortOperStatus | read-only | current | The operational status of the port PSE.1:enable,2:disable,3:force-power |
| 1.3.6.1.4.1.8886.6.1.51.1.1.8 | ColumnrcPsePortForcePower | read-write | current | The force-power status of the port PSE.1:enable,2:disable |
| 1.3.6.1.4.1.8886.6.1.51.1.1.9 | ColumnrcPsePortPoeProtectStatus | read-write | current | The poe protect status of the port PSE. |
| 1.3.6.1.4.1.8886.6.1.51.2 | TablercMainPseTable | not-accessible | current | A table of objects that display and control attributes of the main power source in a PSE device. Ethernet switches are one example of boxes that would support … |
| 1.3.6.1.4.1.8886.6.1.51.2.1 | RowrcMainPseEntry | not-accessible | current | A set of objects that display and control the Main power of a PSE. |
| 1.3.6.1.4.1.8886.6.1.51.2.1.1 | ColumnrcMainPseAveragePower | read-only | current | The average power of the PSE in milliWatts. |
| 1.3.6.1.4.1.8886.6.1.51.2.1.2 | ColumnrcMainPsePeakPower | read-only | current | The peak power of the PSE in milliWatts. |
| 1.3.6.1.4.1.8886.6.1.51.2.1.3 | ColumnrcMainPseLegacyDetectionEnable | read-write | current | Legacy CAP Detection��1-enable��2-disable |
| 1.3.6.1.4.1.8886.6.1.51.2.1.4 | ColumnrcMainPseManageMode | read-write | current | The management mode of power of PSE. 1-auto mode,2-manual mode. |
| 1.3.6.1.4.1.8886.6.1.51.2.1.5 | ColumnrcMainPseTemperatureProtect | read-write | current | The swich of over tempreture protection.1-enable;2-disable. |
| 1.3.6.1.4.1.8886.6.1.51.2.1.6 | ColumnrcMainPseModuleOverTemp | read-only | current | The status of over tempreture alarm for PSE,1-normal;2-alarm. |
| 1.3.6.1.4.1.8886.6.1.51.2.1.7 | ColumnrcMainPseChipSupplyVoltage | read-only | current | The Vmain Voltage Measurement in Millivolt. |
| 1.3.6.1.4.1.8886.6.1.51.2.1.8 | ColumnrcMainPseMode | read-only | current | The status of over tempreture alarm for PSE,1-normal;2-alarm. |
| 1.3.6.1.4.1.8886.6.1.51.2.1.9 | ColumnrcMainPseHighInrushEnable | read-write | current | The power-on instantly whether to allow high current impact,1-allow;2-ban |
| 1.3.6.1.4.1.8886.6.1.51.2.1.10 | ColumnrcMainPseCurrentProtectMode | read-write | current | Set current protect level according to CLASS Level. 1: Set Icut according to CLASS; 2: Set Icut to maximum value according to power allocation limits |
| 1.3.6.1.4.1.8886.6.1.51.3 | NodercPoeNotifications | |||
| 1.3.6.1.4.1.8886.6.1.51.3.1 | NotificationrcMainPseOverTempreture | current | This Notification indicates if Pse is over tempreture or below tempreture. This Notification SHOULD be sent on every status change. |