RAY3-MIB
120 objects
The MIB module defines management objects for RAy product series. Revision 201909200000Z.
Imported Objects
| RFC1155-SMI | enterprises Gauge IpAddress |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-MIB | snmpTraps |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33555 | Identityracom | The MIB module defines management objects for RAy product series. Revision 201909200000Z. | ||
| 1.3.6.1.4.1.33555.4 | Noderay3 | |||
| 1.3.6.1.4.1.33555.4.1 | Nodestation | |||
| 1.3.6.1.4.1.33555.4.1.1 | Nodeproduct | |||
| 1.3.6.1.4.1.33555.4.1.1.1 | ScalarproductName | read-only | current | Product name. |
| 1.3.6.1.4.1.33555.4.1.1.2 | ScalarserialNumber | read-only | current | Product serial number. |
| 1.3.6.1.4.1.33555.4.1.1.3 | ScalarunitType | read-only | current | Station type (L or H). |
| 1.3.6.1.4.1.33555.4.1.2 | Nodeinfo | |||
| 1.3.6.1.4.1.33555.4.1.2.1 | ScalardeviceName | read-only | current | Station name. |
| 1.3.6.1.4.1.33555.4.1.2.2 | ScalarswVer | read-only | current | Firmware version. |
| 1.3.6.1.4.1.33555.4.1.2.3 | ScalarswVerRadio | read-only | current | Radio firmware version. |
| 1.3.6.1.4.1.33555.4.1.3 | Nodestatus | |||
| 1.3.6.1.4.1.33555.4.1.3.1 | ScalarsystemStatus | read-only | current | Unit status. |
| 1.3.6.1.4.1.33555.4.1.3.3 | ScalarpeerNumber | read-only | current | Peer station serial number. |
| 1.3.6.1.4.1.33555.4.1.3.7 | ScalarsecurePeerMode | read-only | current | Secure peer mode. |
| 1.3.6.1.4.1.33555.4.1.3.8 | ScalarlineStatusII | read-only | current | Radio link status. |
| 1.3.6.1.4.1.33555.4.1.3.9 | Scalareth1Link | read-only | current | Ethernet 1 link status. |
| 1.3.6.1.4.1.33555.4.1.3.10 | Scalareth2Link | read-only | current | Ethernet 2 link status. |
| 1.3.6.1.4.1.33555.4.1.4 | Nodechassis | |||
| 1.3.6.1.4.1.33555.4.1.4.1 | ScalartemperatureModem | read-only | current | Modem temperature in hundredths of Celsius. |
| 1.3.6.1.4.1.33555.4.1.4.2 | ScalartemperatureRadio | read-only | current | Radio temperature in hundredths of Celsius. |
| 1.3.6.1.4.1.33555.4.1.4.3 | ScalarvoltageUnit | read-only | current | Power supply voltage in tenths of Volts (V). |
| 1.3.6.1.4.1.33555.4.1.4.4 | ScalarvoltageSource | read-only | current | Source of supply voltage. |
| 1.3.6.1.4.1.33555.4.1.5 | Nodesystem | |||
| 1.3.6.1.4.1.33555.4.1.5.1 | ScalaruseCpu | read-only | current | System use CPU in %. |
| 1.3.6.1.4.1.33555.4.1.5.2 | ScalaruseMemory | read-only | current | System use memory in %. |
| 1.3.6.1.4.1.33555.4.1.5.3 | ScalaruseLogStorage | read-only | current | Use storage for log in %. |
| 1.3.6.1.4.1.33555.4.1.6 | Nodeaccess | |||
| 1.3.6.1.4.1.33555.4.1.6.1 | Scalarsshd | read-only | current | Management interface: SSH. |
| 1.3.6.1.4.1.33555.4.1.6.2 | Scalartelnetd | read-only | current | Management interface: Telnet. |
| 1.3.6.1.4.1.33555.4.1.6.3 | Scalarhttpd | read-only | current | Management interface: HTTP. |
| 1.3.6.1.4.1.33555.4.1.6.4 | Scalarip | read-only | current | Management interface: IP address. |
| 1.3.6.1.4.1.33555.4.1.6.5 | Scalarmac | read-only | current | Management interface: MAC address. |
| 1.3.6.1.4.1.33555.4.1.6.6 | ScalarmanagementVlan | read-only | current | Management interface: VLAN on/off. |
| 1.3.6.1.4.1.33555.4.1.6.7 | ScalarmanagementVlanId | read-only | current | Management interface: VLAN ID. |
| 1.3.6.1.4.1.33555.4.1.6.8 | ScalarwifiHAP | read-only | current | Management interface: WiFi Host Access Point. |
| 1.3.6.1.4.1.33555.4.1.8 | Nodealarm | |||
| 1.3.6.1.4.1.33555.4.1.8.1 | ScalaralarmTemperature | read-only | current | Temperature alarm state. |
| 1.3.6.1.4.1.33555.4.1.8.2 | ScalaralarmVoltageLow | read-only | current | Low voltage alarm state. |
| 1.3.6.1.4.1.33555.4.1.8.3 | ScalaralarmVoltageHigh | read-only | current | High voltage alarm state. |
| 1.3.6.1.4.1.33555.4.1.8.4 | ScalaralarmRss | read-only | current | RSS alarm state. |
| 1.3.6.1.4.1.33555.4.1.8.6 | ScalaralarmBer | read-only | current | BER alarm state. |
| 1.3.6.1.4.1.33555.4.1.8.7 | ScalaralarmPeerDisconnected | read-only | current | Peer disconnect alarm state. |
| 1.3.6.1.4.1.33555.4.1.8.8 | ScalaralarmEth1Down | read-only | current | Ethernet 1 Link Down alarm state. |
| 1.3.6.1.4.1.33555.4.1.8.9 | ScalaralarmEth2Down | read-only | current | Ethernet 2 Link Down alarm state. |
| 1.3.6.1.4.1.33555.4.1.8.11 | ScalaralarmNetBitrate | read-only | current | Air Speed below Limit alarm state. |
| 1.3.6.1.4.1.33555.4.1.8.12 | ScalaralarmWifiOn | read-only | current | WiFi Host Access Point on. |
| 1.3.6.1.4.1.33555.4.1.8.13 | ScalaralarmMse | read-only | current | MSE alarm state. |
| 1.3.6.1.4.1.33555.4.2 | Nodeinterface | |||
| 1.3.6.1.4.1.33555.4.2.1 | NodeifRadio | |||
| 1.3.6.1.4.1.33555.4.2.1.1 | ScalarrxChannel | read-only | current | Receiver channel ID. |
| 1.3.6.1.4.1.33555.4.2.1.2 | ScalartxChannel | read-only | current | Transceiver channel ID. |
| 1.3.6.1.4.1.33555.4.2.1.3 | ScalarrxFreq | read-only | current | Receiver frequency in kHz. |
| 1.3.6.1.4.1.33555.4.2.1.4 | ScalartxFreq | read-only | current | Transceiver frequency in kHz. |
| 1.3.6.1.4.1.33555.4.2.1.5 | ScalarrxModulation | read-only | current | Rx modulation text ID. |
| 1.3.6.1.4.1.33555.4.2.1.6 | ScalartxModulation | read-only | current | Tx modulation text ID. |
| 1.3.6.1.4.1.33555.4.2.1.7 | ScalarrxModulationIndex | read-only | current | Rx modulation index. |
| 1.3.6.1.4.1.33555.4.2.1.8 | ScalartxModulationIndex | read-only | current | Tx modulation index. |
| 1.3.6.1.4.1.33555.4.2.1.11 | Scalarmatching | read-only | current | Channel matching. |
| 1.3.6.1.4.1.33555.4.2.1.12 | ScalarrfPowerConfigured | read-only | current | Configured RF Power in dBm. |
| 1.3.6.1.4.1.33555.4.2.1.13 | ScalarnetBitrate | read-only | current | Current net bitrate in kbps. |
| 1.3.6.1.4.1.33555.4.2.1.14 | ScalarmaxNetBitrate | read-only | current | Maximum net bitrate in Mbps. |
| 1.3.6.1.4.1.33555.4.2.1.15 | ScalartxBandwidthKHz | read-only | current | Radio Tx channel bandwidth in kHz. |
| 1.3.6.1.4.1.33555.4.2.1.16 | ScalarchannelArrangement | read-only | current | Channel arrangement. |
| 1.3.6.1.4.1.33555.4.2.1.17 | ScalarrfPowerCurrent | read-only | current | Current RF Power in dBm. |
| 1.3.6.1.4.1.33555.4.2.1.18 | Scalaracm | read-only | current | ACM option. |
| 1.3.6.1.4.1.33555.4.2.1.19 | Scalaratpc | read-only | current | ATPC option. |
| 1.3.6.1.4.1.33555.4.2.1.20 | ScalarfrequencyTable | read-only | current | Current frequency table name. |
| 1.3.6.1.4.1.33555.4.2.1.21 | ScalarrxBandwidthKHz | read-only | current | Radio Rx channel bandwidth in kHz. |
| 1.3.6.1.4.1.33555.4.2.2 | NodeifEth | |||
| 1.3.6.1.4.1.33555.4.2.2.1 | TableifEthTable | not-accessible | current | List of Ethernet interfaces. |
| 1.3.6.1.4.1.33555.4.2.2.1.1 | RowifEthEntry | not-accessible | current | Ethernet interface entry. |
| 1.3.6.1.4.1.33555.4.2.2.1.1.1 | Columnspeed | read-only | current | Ethernet speed. |
| 1.3.6.1.4.1.33555.4.2.2.1.1.2 | Columnduplex | read-only | current | Ethernet duplex. |
| 1.3.6.1.4.1.33555.4.2.2.1.1.3 | Columnmdix | read-only | current | Ethernet MDI-X / MDI. |
| 1.3.6.1.4.1.33555.4.2.2.1.1.4 | Columnautonego | read-only | current | Ethernet autonego. |
| 1.3.6.1.4.1.33555.4.2.2.1.1.7 | ColumnflowControl | read-only | current | Ethernet flow control. |
| 1.3.6.1.4.1.33555.4.3 | Nodestatistic | |||
| 1.3.6.1.4.1.33555.4.3.2 | Noderadio | |||
| 1.3.6.1.4.1.33555.4.3.2.1 | Scalarrss | read-only | current | Receiving RSS indicator in tenths of dBm. |
| 1.3.6.1.4.1.33555.4.3.2.5 | ScalartimeAllConnect | read-only | current | Overall link uptime. |
| 1.3.6.1.4.1.33555.4.3.2.6 | ScalartimeAllDisconnect | read-only | current | Overall link downtime. |
| 1.3.6.1.4.1.33555.4.3.2.7 | ScalartimeMaxDisconnect | read-only | current | The longest drop (disconnecting). |
| 1.3.6.1.4.1.33555.4.3.2.8 | ScalarnumDisconnect | read-only | current | Number of drops (disconnecting). |
| 1.3.6.1.4.1.33555.4.3.2.9 | Scalarreliability | read-only | current | Reliability in thousandths of %. |
| 1.3.6.1.4.1.33555.4.3.2.10 | ScalarlinkUptime | read-only | current | Current radio link uptime. |
| 1.3.6.1.4.1.33555.4.3.2.11 | Scalarber | read-only | current | Bit Error Rate (BER) multiplied by 10^9. |
| 1.3.6.1.4.1.33555.4.3.2.12 | Scalarmse | read-only | current | Receiving MSE indicator in thnths of dB. |
| 1.3.6.1.4.1.33555.4.3.3 | Nodeethernet | |||
| 1.3.6.1.4.1.33555.4.3.3.1 | ScalarethInThroughput | read-only | current | Input Ethernet 1 data port throughput in kbps. |
| 1.3.6.1.4.1.33555.4.3.3.2 | ScalarethOutThroughput | read-only | current | Output Ethernet 1 data port throughput in kbps. |
| 1.3.6.1.4.1.33555.4.3.3.3 | Scalareth2InThroughput | read-only | current | Input Ethernet 2 data port throughput in kbps. |
| 1.3.6.1.4.1.33555.4.3.3.4 | Scalareth2OutThroughput | read-only | current | Output Ethernet 2 data port throughput in kbps. |
| 1.3.6.1.4.1.33555.4.4 | Nodeswitch | |||
| 1.3.6.1.4.1.33555.4.4.3 | NodeegressQueue | |||
| 1.3.6.1.4.1.33555.4.4.3.2 | ScalarspeedGuard | read-only | current | Speed guard feature on/off. |
| 1.3.6.1.4.1.33555.4.12 | Noderay3Traps | |||
| 1.3.6.1.4.1.33555.4.12.0 | Noderay3TrapsPrefix | |||
| 1.3.6.1.4.1.33555.4.12.0.1 | Notificationtr3TemperatureAlarm | current | Temperature exceeded the threshold. | |
| 1.3.6.1.4.1.33555.4.12.0.2 | Notificationtr3VoltageLowAlarm | current | Supply voltage below minimal threshold. | |
| 1.3.6.1.4.1.33555.4.12.0.3 | Notificationtr3VoltageHighAlarm | current | Supply voltage above maximal threshold. | |
| 1.3.6.1.4.1.33555.4.12.0.4 | Notificationtr3RssAlarm | current | RSS exceeded the threshold. | |
| 1.3.6.1.4.1.33555.4.12.0.5 | Notificationtr3MseAlarm | current | MSE exceeded the threshold. | |
| 1.3.6.1.4.1.33555.4.12.0.6 | Notificationtr3BerAlarm | current | BER exceeded the threshold. | |
| 1.3.6.1.4.1.33555.4.12.0.7 | Notificationtr3AirDisconnect | current | Air line disconnected. | |
| 1.3.6.1.4.1.33555.4.12.0.8 | Notificationtr3AirConnect | current | Air line connected after being disconnected. | |
| 1.3.6.1.4.1.33555.4.12.0.9 | Notificationtr3Eth1LinkDown | current | Local station Ethernet 1 link Up/Down. | |
| 1.3.6.1.4.1.33555.4.12.0.10 | Notificationtr3Eth21LinkDown | current | Local station Ethernet 2 link Up/Down. | |
| 1.3.6.1.4.1.33555.4.12.0.11 | Notificationtr3NetBitrate | current | Air speed below threshold. | |
| 1.3.6.1.4.1.33555.4.12.0.12 | Notificationtr3WifiOn | current | WiFi Host Access Point is on. | |
| 1.3.6.1.4.1.33555.4.12.0.101 | Notificationtr3EventAirCapacity | current | Air channel capacity changed. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlarmState | INTEGER { na (0), up (1), down (2), ack (3) } | current | Alarm status. |
| DisplayStringRaw | OCTET STRING | current | Unlimited display string - UTF8 encoding. |
| Hundredths | Integer32 | current | Numeric 32-bit type with 0.01 precision without subtyping. |
| ModulationList | INTEGER { na (0), qpskS (1), qpsk (2), qam16 (3), qam32 (4), qam64 (5), qam128 (6), qam256 (7), qam512 (8), qam1024 (9), qam2048 (10), qam4096 (11) } | current | Radio channel modulations numerical list |
| OptionSetting | INTEGER { na (0), on (1), off (2) } | current | Setting of some options. |
| PhysAddressRaw | OCTET STRING | current | Unlimited physic address - hexadecimal encoding for each octet. |
| ServiceState | INTEGER { na (0), up (1), down (2) } | current | System service or device state. |
| Tenths | Integer32 | current | Numeric 32-bit type with 0.1 precision without subtyping. |
| Thousandths | Integer32 | current | Numeric 32-bit type with 0.001 precision without subtyping. |