RC-VRF-MIB
65 objects
The MIB module is the definition of the managed objects for the Virtual Router.
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| RAPID-CITY | EnableValue IdList rcVrf |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.203.1 | IdentityrcVrfMib | The MIB module is the definition of the managed objects for the Virtual Router. | ||
| 1.3.6.1.4.1.2272.1.203.1.0 | NodercVrfNotifications | |||
| 1.3.6.1.4.1.2272.1.203.1.1 | NodercVrfObjects | |||
| 1.3.6.1.4.1.2272.1.203.1.1.1 | NodercVrfConfig | |||
| 1.3.6.1.4.1.2272.1.203.1.1.1.1 | NodercVrfConfigScalars | |||
| 1.3.6.1.4.1.2272.1.203.1.1.1.1.1 | ScalarrcVrfConfigNextAvailableVrfId | read-only | current | The next available Virtual Router Id (index). This object provides a hint for the rcVrfId value to use when administratively creating a new rcVrfConfigEntry. A… |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2 | TablercVrfConfigTable | not-accessible | current | This table is for creating the new Virtual Routers. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1 | RowrcVrfConfigEntry | not-accessible | current | The entries in this table can be added/deleted using the rcVrfRowStatus. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.1 | ColumnrcVrfId | not-accessible | current | The unique id of this virtual router instance. A Virtual Router cannot not be created with rcVrfId = 0. VRFID 0 is reserved for the Administrative VRF. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.2 | ColumnrcVrfRowStatus | read-create | current | The status column has three defined values: - `active', which indicates that the conceptual row is available for use by the managed device; - `createAndGo', wh… |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.3 | ColumnrcVrfName | read-write | current | The Name of the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.4 | ColumnrcVrfContextName | read-create | current | The SNMPv2 Community String or SNMPv3 contextName denotes the VRF 'context' and is used to logically separate the MIB module management. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.5 | ColumnrcVrfTrapEnable | read-create | current | This objects is used to enable the generation of the VrfUp and VrfDown traps. true(1) - VRF Traps Enabled false(2) - VRF Traps Disabled |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.6 | ColumnrcVrfMaxRoutes | read-create | current | This object specifies the maximum number of routes that this VRF can support. The default value is 10000. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.7 | ColumnrcVrfAdminStatus | read-create | current | The administrative state of the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.8 | ColumnrcVrfVpnId | read-create | current | The Virtual Private Network Identifier of the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.9 | ColumnrcVrfRpTrigger | read-create | current | This object represents Routing Protocol (RP) Triggers on a Virtual Router and it meant to be used to initiate or shutdown routing protocols on a VRF. Multiple … |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.10 | ColumnrcVrfMaxRoutesTrapEnable | read-create | current | This objects is used to enable the generation of the VRF Max Routes Exceeded traps. true(1) - VRF Max Routes Exceeded Traps Enabled false(2) - VRF Max Routes E… |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.11 | ColumnrcVrfIpv6MaxRoutes | read-create | current | This object specifies the maximum number of IPv6 routes that this VRF can support. The default value is 5000. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.12 | ColumnrcVrfIpv6MaxRoutesTrapEnable | read-create | current | This objects is used to enable the generation of the IPv6 VRF Max Routes Exceeded traps. true(1) - VRF IPv6 Max Routes Exceeded Traps Enabled false(2) - VRF IP… |
| 1.3.6.1.4.1.2272.1.203.1.1.2 | NodercVrfStat | |||
| 1.3.6.1.4.1.2272.1.203.1.1.2.1 | NodercVrfStatScalars | |||
| 1.3.6.1.4.1.2272.1.203.1.1.2.1.1 | ScalarrcVrfConfiguredVRFs | read-only | current | The number of VRFs configured on this network element. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.1.2 | ScalarrcVrfActiveVRFs | read-only | current | The number of VRFs that are active on the network element. These are VRFs for which the rcVrfStatOperStatus = up(1) |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2 | TablercVrfStatTable | not-accessible | current | This table contains statistics for the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1 | RowrcVrfStatEntry | not-accessible | current | Entries in this table are per rcVrfId. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.1 | ColumnrcVrfStatRouteEntries | read-only | current | Total number of routes for this VRF. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.2 | ColumnrcVrfStatFIBEntries | read-only | current | Total number of FIB Entries for this VRF. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.3 | ColumnrcVrfStatUpTime | read-only | current | The time in (in hundredths of a second) since this VRF entry has been operational. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.4 | ColumnrcVrfOperStatus | read-only | current | The operational status of the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.5 | ColumnrcVrfRpStatus | read-only | current | This object represents the status of Routing Protocols on this VRF corresponding to the list of RP specified in rcVrfRpTrigger. The BITS represent an Action-co… |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.6 | ColumnrcVrfRouterAddressType | read-only | current | Router Address Type of this VRF. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.7 | ColumnrcVrfRouterAddress | read-only | current | Router Address of this VRF. It is derived from one of the interfaces. If loopback interface is present, the loopback interface address can be used. However, lo… |
| 1.3.6.1.4.1.2272.1.203.1.1.3 | ScalarrcVrfIpVpnTableSize | read-only | current | Size of Vrf IpVpn Table |
| 1.3.6.1.4.1.2272.1.203.1.1.4 | TablercVrfIpVpnTable | not-accessible | current | Table required to configure vpn under ip. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1 | RowrcVrfIpVpnTableEntry | not-accessible | current | Entries in this table are per rcVrfId. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.1 | ColumnrcVrfIpVpnVrfId | not-accessible | current | The VrfId serves as the Index for the rcIpVpnVrfTable and also for the rcIpVpnRouteDistinguisherTable. It allows to connect to the vrf table to obtain other at… |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.2 | ColumnrcVrfIpVpnStatus | read-create | current | The status of IpVpn. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.3 | ColumnrcVrfIpVpnImportRTList | read-create | current | The Import RT list is a list of all the route-targets attached to a particular vrf behaving in the import mode. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.4 | ColumnrcVrfIpVpnExportRTList | read-create | current | The Export RT list is a list of all the route-targets attached to a particular vrf in the export mode. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.5 | ColumnrcVrfIpVpnSvcLblAllocOpt | read-create | current | The service label allocation option for the ipvpn |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.6 | ColumnrcVrfIpVpnRowStatus | read-create | current | RowStatus for the Vpn Entry. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.7 | ColumnrcVrfIpVpnIsidNumber | read-create | current | IP VPN I-SID number.Default 0 value indicates that no i-sid has been assinged. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.8 | ColumnrcVrfIpEvpnEnableStatus | read-create | current | The status of Evpn. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.9 | ColumnrcVrfIpEvpnVnidNumber | read-create | current | Ip Evpn VNID number.Default 0 value indicates that no VNID has been assinged. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.10 | ColumnrcVrfIpVpnIsidName | read-only | current | The administratively-assigned name for the I-SID. |
| 1.3.6.1.4.1.2272.1.203.1.1.5 | TablercVrfNameTable | not-accessible | current | This table is for EDM and SNMP agent to get source vrf name for inter-vrf route redistribute. |
| 1.3.6.1.4.1.2272.1.203.1.1.5.1 | RowrcVrfNameEntry | not-accessible | current | Each entry has the vrfid and name for source vrf needed by inter-vrf route redistribute. |
| 1.3.6.1.4.1.2272.1.203.1.1.5.1.1 | ColumnrcVrfNameVrfId | not-accessible | current | The unique id of this virtual router instance. |
| 1.3.6.1.4.1.2272.1.203.1.1.5.1.2 | ColumnrcVrfNameVrfName | read-only | current | The Name of the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.6 | ScalarrcVrfIpv6IpVpnTableSize | read-only | current | Size of Vrf Ipv6IpVpn Table |
| 1.3.6.1.4.1.2272.1.203.1.1.7 | TablercVrfIpv6IpVpnTable | not-accessible | current | Table required to configure vpn under ipv6. |
| 1.3.6.1.4.1.2272.1.203.1.1.7.1 | RowrcVrfIpv6IpVpnTableEntry | not-accessible | current | Entries in this table are per rcVrfId. |
| 1.3.6.1.4.1.2272.1.203.1.1.7.1.1 | ColumnrcVrfIpv6IpVpnVrfId | not-accessible | current | The VrfId serves as the Index for the rcVrfIpv6IpVpnTable It allows to connect to the vrf table to obtain other attributes like the vrf name etc. |
| 1.3.6.1.4.1.2272.1.203.1.1.7.1.2 | ColumnrcVrfIpv6IpVpnStatus | read-create | current | The status of Ipv6Vpn. |
| 1.3.6.1.4.1.2272.1.203.1.1.7.1.3 | ColumnrcVrfIpv6IpVpnImportRTList | read-create | current | The Import RT list is a list of all the route-targets attached to a particular vrf behaving in the import mode. |
| 1.3.6.1.4.1.2272.1.203.1.1.7.1.4 | ColumnrcVrfIpv6IpVpnExportRTList | read-create | current | The Export RT list is a list of all the route-targets attached to a particular vrf in the export mode. |
| 1.3.6.1.4.1.2272.1.203.1.1.7.1.5 | ColumnrcVrfIpv6IpVpnSvcLblAllocOpt | read-create | current | The service label allocation option for the ipv6vpn |
| 1.3.6.1.4.1.2272.1.203.1.1.7.1.6 | ColumnrcVrfIpv6IpVpnRowStatus | read-create | current | RowStatus for the Vpn Entry. |
| 1.3.6.1.4.1.2272.1.203.1.1.7.1.7 | ColumnrcVrfIpv6IpVpnIsidNumber | read-create | current | Ipv6 IP VPN I-SID number.Default 0 value indicates that no i-sid has been assinged. |
| 1.3.6.1.4.1.2272.1.203.1.1.7.1.8 | ColumnrcVrfIpv6IpVpnIsidName | read-only | current | The administratively-assigned name for the I-SID. |
| 1.3.6.1.4.1.2272.1.203.1.2 | NodercVrfNotificationObjects |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VPNId | OCTET STRING (SIZE (7)) | current | The purpose of a VPN-ID is to uniquely identify a VPN. The Global VPN Identifier format is: 3 octet VPN Authority, Organizationally Unique Identifier followed by 4 octet VPN index identifying VPN according to OUI |
| VrfIdentifier | Unsigned32 (0..4294967295) | current | Virtual Router Identifier. VRFID 0 is reserved for the Administrative VRF and cannot be used to create VRF's. |
| VrfRpTriggerBitCode | BITS { rip (0), ospf(1), bgp (2), isis(3), pim (4), mvr (5), pim6 (6), msdp (7), ospfv3 (8) } | current | This object represents Routing Protocol (RP) Triggers on a Virtual Router. The BITS represent an Action-code that specifies the action on the Routing Protocols. The actions are: initiate or shutdown. When encoding the R… |