REDSTONE-SNMP-MIB
35 objects
MIB objects for configuring SNMP-based management access into Redstone Communications Inc. products.
Imported Objects
| REDSTONE-SMI | rsMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2773.2.16 | IdentityrsSnmpMIB | MIB objects for configuring SNMP-based management access into Redstone Communications Inc. products. | ||
| 1.3.6.1.4.1.2773.2.16.1 | NodersSnmpObjects | |||
| 1.3.6.1.4.1.2773.2.16.1.1 | NodersSnmpGeneral | |||
| 1.3.6.1.4.1.2773.2.16.1.1.1 | ScalarrsSnmpMaxPduSize | read-write | current | The maximum sized SNMP PDU, in bytes, that this agent is capable of handling. The default is 1500 bytes. The posssibility of IP fragmentation should be conside… |
| 1.3.6.1.4.1.2773.2.16.1.2 | NodersSnmpCommunity | |||
| 1.3.6.1.4.1.2773.2.16.1.2.1 | TablersSnmpCommunityTable | not-accessible | current | Table of SNMP management clients. Authentic SNMP clients are identified by a combination community name and IP address. Upon receipt of an SNMP request, this t… |
| 1.3.6.1.4.1.2773.2.16.1.2.1.1 | RowrsSnmpCommunityEntry | not-accessible | current | A table entry describing an authentic SNMP Community. |
| 1.3.6.1.4.1.2773.2.16.1.2.1.1.1 | ColumnrsSnmpCommunityName | read-only | current | An SNMP community name. |
| 1.3.6.1.4.1.2773.2.16.1.2.1.1.2 | ColumnrsSnmpCommunityRowStatus | read-create | current | Controls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' enumeration values are supported. |
| 1.3.6.1.4.1.2773.2.16.1.2.1.1.3 | ColumnrsSnmpCommunityPrivilege | read-create | current | The access privileges for a SNMP Community authenticated by this entry. readOnly Read-only access to nonadministrative portions of MIB. readWrite Read-write ac… |
| 1.3.6.1.4.1.2773.2.16.1.2.1.1.4 | ColumnrsSnmpCommunityAccessList | read-create | current | If nonzero, the number of an IP access list that describes the IP hosts permitted SNMP management access to this device via the corresponding community name co… |
| 1.3.6.1.4.1.2773.2.16.1.3 | NodersSnmpTrap | |||
| 1.3.6.1.4.1.2773.2.16.1.3.1 | ScalarrsSnmpTrapGlobalFilter | read-write | current | This object provides global control over trap generation by this agent. For each bit position, a '1' or '0' indicates the corresponding trap category is enable… |
| 1.3.6.1.4.1.2773.2.16.1.3.2 | ScalarrsSnmpTrapSource | read-write | current | The ifIndex of the interface whose IP address is used as the source IP address for outbound SNMP traps. If zero, no interface is specified, the mechanism for s… |
| 1.3.6.1.4.1.2773.2.16.1.3.3 | TablersSnmpTrapHostTable | not-accessible | current | Table of SNMP Trap recipient. |
| 1.3.6.1.4.1.2773.2.16.1.3.3.1 | RowrsSnmpTrapHostEntry | not-accessible | current | A table entry describing an SNMP Trap recipient. |
| 1.3.6.1.4.1.2773.2.16.1.3.3.1.1 | ColumnrsSnmpTrapHostIpAddress | read-only | current | IP address of an authorized SNMP Trap recipient. This must be a host IP address. |
| 1.3.6.1.4.1.2773.2.16.1.3.3.1.2 | ColumnrsSnmpTrapHostRowStatus | read-create | current | Controls creation/deletion of entries in this table. Only 'createAndGo' and 'destroy' enumeration values are supported. |
| 1.3.6.1.4.1.2773.2.16.1.3.3.1.3 | ColumnrsSnmpTrapHostUdpPort | read-create | current | The destination UDP port to which traps will be sent. |
| 1.3.6.1.4.1.2773.2.16.1.3.3.1.4 | ColumnrsSnmpTrapHostCommunity | read-create | current | An SNMP community name to be used in traps sent to this destination. |
| 1.3.6.1.4.1.2773.2.16.1.3.3.1.5 | ColumnrsSnmpTrapHostProtocolVersion | read-create | current | The format of the SNMP trap PDU to be sent to this trap destination. v1 Trap-PDU defined in RFC1157, encapsulated in Message structure also defined in RFC1157.… |
| 1.3.6.1.4.1.2773.2.16.1.3.3.1.6 | ColumnrsSnmpTrapHostFilter | read-create | current | Bit mask designating the specific trap types enabled for transmission to this trap destination. For each bit position, a '1' or '0' indicates the corresponding… |
| 1.3.6.1.4.1.2773.2.16.1.3.3.1.7 | ColumnrsSnmpTrapHostSends | read-only | current | The number of traps submitted for transmission to this destination. |
| 1.3.6.1.4.1.2773.2.16.1.4 | NodersSnmpAuthFailId | |||
| 1.3.6.1.4.1.2773.2.16.1.4.1 | ScalarrsSnmpAuthFailIdIpAddress | accessible-for-notify | current | The source IP address contained in a received SNMP request that failed authentication. |
| 1.3.6.1.4.1.2773.2.16.1.4.2 | ScalarrsSnmpAuthFailIdUdpPort | accessible-for-notify | current | The source UDP port contained in a received SNMP request that failed authentication. |
| 1.3.6.1.4.1.2773.2.16.1.4.3 | ScalarrsSnmpAuthFailIdCommunity | accessible-for-notify | current | The SNMP community contained in a received SNMP request that failed authentication. |
| 1.3.6.1.4.1.2773.2.16.1.4.4 | ScalarrsSnmpAuthFailIdReason | accessible-for-notify | current | The reason a received SNMP request failed authentication: other Unspecified reason. badCommunityName The community is not recognized. badCommunityUse The commu… |
| 1.3.6.1.4.1.2773.2.16.2 | NodersSnmpConformance | |||
| 1.3.6.1.4.1.2773.2.16.2.1 | NodersSnmpCompliances | |||
| 1.3.6.1.4.1.2773.2.16.2.1.1 | CompliancersSnmpCompliance | current | The compliance statement for entities which implement the Redstone SNMP MIB. | |
| 1.3.6.1.4.1.2773.2.16.2.2 | NodersSnmpGroups | |||
| 1.3.6.1.4.1.2773.2.16.2.2.1 | GrouprsSnmpGroup | current | A collection of management objects pertaining to SNMP Agent capability in a Redstone product. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RsSnmpCommunityName | DisplayString(SIZE(1..31)) | current | An SNMP community name. The character repertoire of the string is restricted to printable, non-whitespace characters. |
| RsSnmpTrapMask | OCTET STRING (SIZE(4)) | current | This octet string is interpreted as a bit mask, in which each bit corresponds to a category of SNMP trap. The DESCRIPTION clause of a MIB object having this SYNTAX should specify the semantics of bit values '1' and '0'.… |