MIB Viewer

RFC1233-MIB

45 objects
No module-level DESCRIPTION found.
OIDNameAccessStatusDescription
1.3.6.1.3.15Nodeds3
1.3.6.1.3.15.1Tableds3ConfigTablenot-accessiblemandatoryThe DS3 Configuration table.
1.3.6.1.3.15.1.1Rowds3ConfigEntrynot-accessiblemandatoryAn entry in the DS3 Configuration table.
1.3.6.1.3.15.1.1.1Columnds3CSUIndexread-onlymandatoryThe index value which uniquely identifies the CSU to which this entry is applicable.
1.3.6.1.3.15.1.1.2Columnds3Indexread-onlymandatoryAn index value that uniquely identifies a DS3 Interface. The interface identified by a particular value of this index is the same interface as identified by th…
1.3.6.1.3.15.1.1.3Columnds3TimeElapsedread-onlymandatoryThe number of seconds, including partial seconds, that have elapsed since the beginning of the current error-measurement period.
1.3.6.1.3.15.1.1.4Columnds3ValidIntervalsread-onlymandatoryThe number of previous intervals for which valid data was collected. The value will be 96 unless the CSU device was brought online within the last 24 hours, in…
1.3.6.1.3.15.1.1.5Columnds3LineTyperead-onlymandatoryThis variable indicates the variety of DS3 C-bit application implementing this circuit. The type of circuit affects the interpretation of the usage and error s…
1.3.6.1.3.15.1.1.6Columnds3ZeroCodingread-onlymandatoryThis variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. ds3B3ZS refers to the use…
1.3.6.1.3.15.1.1.7Columnds3Loopbackread-onlymandatoryThis variable represents the loopback state of the CSU. Devices supporting read/write access should return badValue in response to a requested loopback state t…
1.3.6.1.3.15.1.1.8Columnds3SendCoderead-onlymandatoryThis variable indicates what type of code is being sent across the DS1 circuit by the CSU. The values mean: ds3SendNoCode sending looped or normal data ds3Send…
1.3.6.1.3.15.1.1.9Columnds3YellowAlarmread-onlymandatoryThis variable indicates if a Yellow Alarm condition exists.
1.3.6.1.3.15.1.1.10Columnds3RedAlarmread-onlymandatoryThis variable indicates if a Red Alarm condition exists.
1.3.6.1.3.15.1.1.11Columnds3CircuitIdentifierread-onlymandatoryThis variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.
1.3.6.1.3.15.2Tableds3IntervalTablenot-accessiblemandatoryThe DS3 Interval table.
1.3.6.1.3.15.2.1Rowds3IntervalEntrynot-accessiblemandatoryAn entry in the DS3 Interval table.
1.3.6.1.3.15.2.1.1Columnds3IntervalIndexread-onlymandatoryThe index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same i…
1.3.6.1.3.15.2.1.2Columnds3IntervalNumberread-onlymandatoryA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.3.15.2.1.3Columnds3IntervalESsread-onlymandatoryThe counter associated with the number of Errored Seconds, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, interv…
1.3.6.1.3.15.2.1.4Columnds3IntervalSESsread-onlymandatoryThe counter associated with the number of Severely Errored Seconds, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minut…
1.3.6.1.3.15.2.1.5Columnds3IntervalSEFSsread-onlymandatoryThe counter associated with the number of Severely Errored Framing Seconds, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual …
1.3.6.1.3.15.2.1.6Columnds3IntervalUASsread-onlymandatoryThe counter associated with the number of Unavailable Seconds, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, in…
1.3.6.1.3.15.2.1.7Columnds3IntervalCSSsread-onlymandatoryThe counter associated with the number of Controlled Slip Seconds, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute…
1.3.6.1.3.15.2.1.8Columnds3IntervalBPVsread-onlymandatoryThe counter associated with the number of Bipolar Violations, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, int…
1.3.6.1.3.15.2.1.9Columnds3IntervalCVsread-onlymandatoryThe counter associated with the number of Coding Violations, as defined by [12], encountered by a DS3 CSU in one of the previous 96, individual 15 minute, inte…
1.3.6.1.3.15.3Tableds3CurrentTablenot-accessiblemandatoryThe DS3 Current table.
1.3.6.1.3.15.3.1Rowds3CurrentEntrynot-accessiblemandatoryAn entry in the DS3 Current table.
1.3.6.1.3.15.3.1.1Columnds3CurrentIndexread-onlymandatoryThe index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same i…
1.3.6.1.3.15.3.1.2Columnds3CurrentESsread-onlymandatoryThe counter associated with the number of Errored Seconds, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval.
1.3.6.1.3.15.3.1.3Columnds3CurrentSESsread-onlymandatoryThe counter associated with the number of Severely Errored Seconds, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval.
1.3.6.1.3.15.3.1.4Columnds3CurrentSEFSsread-onlymandatoryThe counter associated with the number of Severely Errored Framing Seconds, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval.
1.3.6.1.3.15.3.1.5Columnds3CurrentUASsread-onlymandatoryThe counter associated with the number of Unavailable Seconds, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval.
1.3.6.1.3.15.3.1.6Columnds3CurrentCSSsread-onlymandatoryThe counter associated with the number of Controlled Slip Seconds, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval. Note that SY…
1.3.6.1.3.15.3.1.7Columnds3CurrentBPVsread-onlymandatoryThe counter associated with the number of Bipolar Violations, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval.
1.3.6.1.3.15.3.1.8Columnds3CurrentCVsread-onlymandatoryThe counter associated with the number of Coding Violations, as defined by [12], encountered by a DS3 CSU in the current 15 minute interval.
1.3.6.1.3.15.4Tableds3TotalTablenot-accessiblemandatoryThe DS3 Total table. 24 hour interval.
1.3.6.1.3.15.4.1Rowds3TotalEntrynot-accessiblemandatoryAn entry in the DS3 Total table.
1.3.6.1.3.15.4.1.1Columnds3TotalIndexread-onlymandatoryThe index value which uniquely identifies the CSU to which this entry is applicable. The interface identified by a particular value of this index is the same i…
1.3.6.1.3.15.4.1.2Columnds3TotalESsread-onlymandatoryThe counter associated with the number of Errored Seconds, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval.
1.3.6.1.3.15.4.1.3Columnds3TotalSESsread-onlymandatoryThe counter associated with the number of Severely Errored Seconds, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval.
1.3.6.1.3.15.4.1.4Columnds3TotalSEFSsread-onlymandatoryThe counter associated with the number of Severely Errored Framing Seconds, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval.
1.3.6.1.3.15.4.1.5Columnds3TotalUASsread-onlymandatoryThe counter associated with the number of Unavailable Seconds, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval.
1.3.6.1.3.15.4.1.6Columnds3TotalCSSsread-onlymandatoryThe counter associated with the number of Controlled Slip Seconds, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval. Note that SYN…
1.3.6.1.3.15.4.1.7Columnds3TotalBPVsread-onlymandatoryThe counter associated with the number of Bipolar Violations, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval.
1.3.6.1.3.15.4.1.8Columnds3TotalCVsread-onlymandatoryThe counter associated with the number of Coding Violations, as defined by [12], encountered by a DS3 CSU in the previous 24 hour interval.