RFCEnBridge-MIB
70 objects
No module-level DESCRIPTION found.
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.3.14 | Nodedot1dBridge | |||
| 1.3.6.1.3.14.1 | Nodedot1dBase | |||
| 1.3.6.1.3.14.1.1 | Scalardot1dBaseBridgeAddress | read-only | mandatory | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.3.14.1.2 | Scalardot1dBaseNumPorts | read-only | mandatory | The number of ports controlled by this bridging entity. |
| 1.3.6.1.3.14.1.3 | Scalardot1dBaseType | read-only | mandatory | Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the… |
| 1.3.6.1.3.14.1.4 | Tabledot1dBasePortTable | not-accessible | mandatory | A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included. |
| 1.3.6.1.3.14.1.4.1 | Rowdot1dBasePortEntry | not-accessible | mandatory | A list of information for each port of the bridge. |
| 1.3.6.1.3.14.1.4.1.1 | Columndot1dBasePortIfIndex | read-only | mandatory | Identifies the port for which this entry contains bridge management information. The value of this object for a particular port has the same value as the ifInd… |
| 1.3.6.1.3.14.1.4.1.2 | Columndot1dBasePortDelayExceededDiscards | read-only | mandatory | The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.3.14.1.4.1.3 | Columndot1dBasePortMtuExceededDiscards | read-only | mandatory | The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.3.14.2 | Nodedot1dStp | |||
| 1.3.6.1.3.14.2.1 | Scalardot1dStpProtocolSpecification | read-only | mandatory | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.3.14.2.2 | Scalardot1dStpPriority | read-write | mandatory | The value of the priority field which is contained in the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are give… |
| 1.3.6.1.3.14.2.3 | Scalardot1dStpTimeSinceTopologyChange | read-only | mandatory | The time (in hundreths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.3.14.2.4 | Scalardot1dStpTopChanges | read-only | mandatory | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.3.14.2.5 | Scalardot1dStpDesignatedRoot | read-only | mandatory | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.3.14.2.6 | Scalardot1dStpRootCost | read-only | mandatory | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.3.14.2.7 | Scalardot1dStpRootPort | read-only | mandatory | Identifies the port which offers the lowest cost path from this bridge to the root bridge. The value of this object indicates the port for which the ifIndex ob… |
| 1.3.6.1.3.14.2.8 | Scalardot1dStpMaxAge | read-only | mandatory | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.3.14.2.9 | Scalardot1dStpHelloTime | read-only | mandatory | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.3.14.2.10 | Scalardot1dStpHoldTime | read-only | mandatory | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.3.14.2.11 | Scalardot1dStpForwardDelay | read-only | mandatory | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.3.14.2.12 | Scalardot1dStpBridgeMaxAge | read-write | mandatory | The value that all bridges use for MaxAge when this bridge is acting as the root. |
| 1.3.6.1.3.14.2.13 | Scalardot1dStpBridgeHelloTime | read-write | mandatory | The value that all bridges use for HelloTime when this bridge is acting as the root. |
| 1.3.6.1.3.14.2.14 | Scalardot1dStpBridgeForwardDelay | read-write | mandatory | The value that all bridges use for ForwardDelay when this bridge is acting as the root. |
| 1.3.6.1.3.14.2.15 | Tabledot1dStpPortTable | not-accessible | mandatory | A table that contains port-specific information for the Spanning Tree Protocol. |
| 1.3.6.1.3.14.2.15.1 | Rowdot1dStpPortEntry | not-accessible | mandatory | A list of information maintained by every port about the Spanning Tree Protocol state for that port. |
| 1.3.6.1.3.14.2.15.1.1 | Columndot1dStpPortIfIndex | read-only | mandatory | Identifies the port for which this entry contains Spanning Tree Protocol management information. The value of this object for a particular port has the same va… |
| 1.3.6.1.3.14.2.15.1.2 | Columndot1dStpPortPriority | read-write | mandatory | The value of the priority field which is contained in the first octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of do… |
| 1.3.6.1.3.14.2.15.1.3 | Columndot1dStpPortState | read-only | mandatory | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.3.14.2.15.1.4 | Columndot1dStpPortEnable | read-write | mandatory | The enabled/disabled status of the port. |
| 1.3.6.1.3.14.2.15.1.5 | Columndot1dStpPortMultiCastAddr | read-only | mandatory | The MAC address used as the destination for all Spanning Tree Protocol PDU generated out this port. |
| 1.3.6.1.3.14.2.15.1.6 | Columndot1dStpPortPathCost | read-write | mandatory | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. |
| 1.3.6.1.3.14.2.15.1.7 | Columndot1dStpPortDesignatedRoot | read-only | mandatory | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the LAN to which the Port i… |
| 1.3.6.1.3.14.2.15.1.8 | Columndot1dStpPortDesignatedCost | read-only | mandatory | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.3.14.2.15.1.9 | Columndot1dStpPortDesignatedBridge | read-only | mandatory | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.3.14.2.15.1.10 | Columndot1dStpPortDesignatedPort | read-only | mandatory | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.3.14.2.15.1.11 | Columndot1dStpPortForwardTransitions | read-only | mandatory | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.3.14.4 | Nodedot1dTp | |||
| 1.3.6.1.3.14.4.1 | Scalardot1dTpLearntEntryDiscards | read-only | mandatory | The total number of Forwarding Database entries, which have been or would have been learnt, but have been discarded due to a lack of space to store them in the… |
| 1.3.6.1.3.14.4.2 | Scalardot1dTpAgingTime | read-write | mandatory | The timeout period in seconds for aging out dynamically learned forwarding information. |
| 1.3.6.1.3.14.4.3 | Tabledot1dTpFdbTable | not-accessible | mandatory | A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.3.14.4.3.1 | Rowdot1dTpFdbEntry | not-accessible | mandatory | Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information. |
| 1.3.6.1.3.14.4.3.1.1 | Columndot1dTpFdbAddress | read-only | mandatory | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.3.14.4.3.1.2 | Columndot1dTpFdbPort | read-only | mandatory | Either the value '0', or the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen.… |
| 1.3.6.1.3.14.4.3.1.3 | Columndot1dTpFdbStatus | read-only | mandatory | The status of this entry. The meanings of the values are: other(1) : none of the following. This would include the case where some other MIB object (not the co… |
| 1.3.6.1.4.1.50 | Nodeods | |||
| 1.3.6.1.4.1.50.2 | NodeenBridge | |||
| 1.3.6.1.4.1.50.2.1 | ScalarspanningTreeEnable | read-write | mandatory | An indication of whether Spanning Tree is being run. |
| 1.3.6.1.4.1.50.2.2 | TableprotFilterTable | not-accessible | mandatory | A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from … |
| 1.3.6.1.4.1.50.2.2.1 | RowprotFilterEntry | not-accessible | mandatory | Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and… |
| 1.3.6.1.4.1.50.2.2.1.1 | ColumnprotAddress | read-only | mandatory | The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group addres… |
| 1.3.6.1.4.1.50.2.2.1.2 | ColumnprotReceivePort | read-only | mandatory | The port from which a frame must be received in order for this entry's filtering information to apply. The value of this object is either zero, or it indicates… |
| 1.3.6.1.4.1.50.2.2.1.3 | ColumnprotAllowedToGoTo | read-write | mandatory | The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the valu… |
| 1.3.6.1.4.1.50.2.2.1.4 | ColumnprotStatus | read-write | mandatory | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.50.2.3 | TablesrcFilterTable | not-accessible | mandatory | A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from … |
| 1.3.6.1.4.1.50.2.3.1 | RowsrcFilterEntry | not-accessible | mandatory | Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and… |
| 1.3.6.1.4.1.50.2.3.1.1 | ColumnsrcAddress | read-only | mandatory | The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group addres… |
| 1.3.6.1.4.1.50.2.3.1.2 | ColumnsrcReceivePort | read-only | mandatory | The port from which a frame must be received in order for this entry's filtering information to apply. The value of this object is either zero, or it indicates… |
| 1.3.6.1.4.1.50.2.3.1.3 | ColumnsrcAllowedToGoTo | read-write | mandatory | The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the valu… |
| 1.3.6.1.4.1.50.2.3.1.4 | ColumnsrcStatus | read-write | mandatory | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.50.2.4 | TabledestFilterTable | not-accessible | mandatory | A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from … |
| 1.3.6.1.4.1.50.2.4.1 | RowdestFilterEntry | not-accessible | mandatory | Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and… |
| 1.3.6.1.4.1.50.2.4.1.1 | ColumndestAddress | read-only | mandatory | The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group addres… |
| 1.3.6.1.4.1.50.2.4.1.2 | ColumndestReceivePort | read-only | mandatory | The port from which a frame must be received in order for this entry's filtering information to apply. The value of this object is either zero, or it indicates… |
| 1.3.6.1.4.1.50.2.4.1.3 | ColumndestAllowedToGoTo | read-write | mandatory | The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the valu… |
| 1.3.6.1.4.1.50.2.4.1.4 | ColumndestStatus | read-write | mandatory | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.50.2.5 | NodefilterSwitches | |||
| 1.3.6.1.4.1.50.2.5.1 | ScalarmanualFilterSwitch | read-write | mandatory | This object indicates the status of manual filter switches. enabled(1) - all manual filter switches entered in the filtering table are active. Therfore, the pa… |
| 1.3.6.1.4.1.50.2.5.2 | ScalarexclusiveFilter | read-write | mandatory | This object indicates the status of manual filter switches. filter(1) - all addresses in the manual filtering table are filter addresses. Thus, if an incoming … |