RING-MIB
102 objects
The MIB module for coriolis rings
Imported Objects
| CORIOLIS-MIB | coriolisMibs ring |
| DEVICE-MIB | chassisElemReachStatus chassisIpAddr |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | IpAddress |
| RFC1213-MIB | DisplayString sysName |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5812.3 | NoderingOperStatusChange | change in operational status of a configured logical ring | ||
| 1.3.6.1.4.1.5812.4 | NodeneReachabilityChange | change in the reachability status of NE | ||
| 1.3.6.1.4.1.5812.4.1 | ScalaractPhyRingCount | read-only | current | Actual number of physical rings passing through the device |
| 1.3.6.1.4.1.5812.4.2 | TableactPhyRingTable | not-accessible | current | The actual physical ring table. The number of entries in this table is given by actPhyRingCount |
| 1.3.6.1.4.1.5812.4.2.1 | RowactPhyRingEntry | not-accessible | current | Entry containing information about the attributes of actual physical rings passing through a device |
| 1.3.6.1.4.1.5812.4.2.1.1 | ColumnphyRingSlotNo | read-only | current | The slot number for the physical ring |
| 1.3.6.1.4.1.5812.4.2.1.2 | ColumnphyRingPortNo | read-only | current | The port number of the physical ring |
| 1.3.6.1.4.1.5812.4.3 | ScalaractLogRingCount | read-only | current | Actual number of logical rings passing through the device |
| 1.3.6.1.4.1.5812.4.4 | TableactLogRingTable | not-accessible | current | The actual logical ring table. The number of entries in this table is given by actLogRingCount |
| 1.3.6.1.4.1.5812.4.4.1 | RowactLogRingEntry | not-accessible | current | Entry containing information about the attributes of actual logical rings passing through a device |
| 1.3.6.1.4.1.5812.4.4.1.1 | ColumnlogRingVPortNo | read-only | current | The lambda number of the logical ring if applicable, else 0 |
| 1.3.6.1.4.1.5812.4.4.1.2 | ColumnlogRingElemCount | read-only | current | Number of Elements on this logical ring |
| 1.3.6.1.4.1.5812.4.4.1.3 | ColumnlogRingLambdaStatus | read-only | current | The status of the lambda for the logical ring |
| 1.3.6.1.4.1.5812.4.4.1.5 | ColumnlogRingProtoStatusTxt | read-only | current | The ascii text describing the protocol status of the ring |
| 1.3.6.1.4.1.5812.4.4.1.6 | ColumnlogRingProtoStatus | read-only | current | The protocol status of the logical ring |
| 1.3.6.1.4.1.5812.4.4.1.7 | ColumnlogRingGneName | read-only | current | The name of the GNE on the ring. |
| 1.3.6.1.4.1.5812.4.4.1.8 | ColumnlogRingGneIpAddr | read-only | current | The IP address of the GNE on the ring. |
| 1.3.6.1.4.1.5812.4.4.1.9 | ColumnlogRingGneRingSlot | read-only | current | The slot of the connected GNE ring. |
| 1.3.6.1.4.1.5812.4.4.1.10 | ColumnlogRingGneRingPort | read-only | current | The port of the connected GNE ring. |
| 1.3.6.1.4.1.5812.4.4.1.11 | ColumnlogRingGneRingVport | read-only | current | The virtual port of the connected GNE ring. |
| 1.3.6.1.4.1.5812.4.4.1.12 | ColumnlogRingUpsNgbrName | read-only | current | The name of the upstream neighbor on the ring. |
| 1.3.6.1.4.1.5812.4.4.1.13 | ColumnlogRingUpsNgbrIpAddr | read-only | current | The IP address of the upstream neighbor on the ring. |
| 1.3.6.1.4.1.5812.4.4.1.14 | ColumnlogRingUpsNgbrRingSlot | read-only | current | The slot of the connected upstream neighbors ring. |
| 1.3.6.1.4.1.5812.4.4.1.15 | ColumnlogRingUpsNgbrRingPort | read-only | current | The port of the connected upstream neighbors ring. |
| 1.3.6.1.4.1.5812.4.4.1.16 | ColumnlogRingUpsNgbrRingVport | read-only | current | The virtual port of the connected upstream neighbors ring. |
| 1.3.6.1.4.1.5812.4.4.1.17 | ColumnlogRingIsConfigured | read-only | current | Whether this ring has been configured by NM |
| 1.3.6.1.4.1.5812.4.4.1.18 | ColumnlogRingAttRingType | read-only | current | This object provides the type of the ring. |
| 1.3.6.1.4.1.5812.4.4.1.19 | ColumnlogRingCapacity | read-only | current | The capacity of the ring. |
| 1.3.6.1.4.1.5812.4.4.1.20 | ColumnlogRingCutLocationIp | read-only | current | IP address of the element where ring is cut. |
| 1.3.6.1.4.1.5812.4.4.1.21 | ColumnlogRingCutLocationName | read-only | current | Name of the element where ring is cut. |
| 1.3.6.1.4.1.5812.4.4.1.22 | ColumnlogRingIsRingMaster | read-only | current | Whether this node is master on the ring. |
| 1.3.6.1.4.1.5812.4.4.1.23 | ColumnlogRingOtherSlot | read-only | current | The slot of the other(for working, it's protected or vice versa) ring. |
| 1.3.6.1.4.1.5812.4.4.1.24 | ColumnlogRingOtherPort | read-only | current | The port of the other(for working, it's protected or vice versa) ring. |
| 1.3.6.1.4.1.5812.4.4.1.25 | ColumnlogRingOtherVport | read-only | current | The vport of the other(for working, it's protected or vice versa) ring. |
| 1.3.6.1.4.1.5812.4.5 | TableactLogRingElemTable | not-accessible | current | The actual logical ring topology table. This describes the Elements on a logical ring |
| 1.3.6.1.4.1.5812.4.5.1 | RowactLogRingElemEntry | not-accessible | current | Entry containing information about the Elements on a logical ring |
| 1.3.6.1.4.1.5812.4.5.1.1 | ColumnlogRingElemIndex | read-only | current | The position of the Element on the ring starting from the transmit side of GNE |
| 1.3.6.1.4.1.5812.4.5.1.2 | ColumnlogRingElemName | read-only | current | The name of the Element |
| 1.3.6.1.4.1.5812.4.5.1.3 | ColumnlogRingElemMACAddr | read-only | current | The MAC address of the Element |
| 1.3.6.1.4.1.5812.4.5.1.4 | ColumnlogRingElemIpAddr | read-only | current | The IP address of the Element |
| 1.3.6.1.4.1.5812.4.5.1.5 | ColumnlogRingElemPortId | read-only | current | The port id for the logical ring on this NE |
| 1.3.6.1.4.1.5812.4.5.1.6 | ColumnlogRingElemChassisId | read-only | current | The chassis identifier of the Element |
| 1.3.6.1.4.1.5812.4.5.1.7 | ColumnlogRingElemActiveMM | read-only | current | The active management module of the Element |
| 1.3.6.1.4.1.5812.4.5.1.8 | ColumnlogRingElemIsInNeTable | read-only | current | Indicates whether this element has it's entry in the cfgNeTable |
| 1.3.6.1.4.1.5812.4.5.1.9 | ColumnlogRingElemIsReachable | read-only | current | Indicates whether this element is reachable on this ring. |
| 1.3.6.1.4.1.5812.4.5.1.10 | ColumnlogRingElemIsLambdaCutHere | read-only | current | Indicates whether there is a lambda cut at this element. |
| 1.3.6.1.4.1.5812.4.5.1.11 | ColumnlogRingElemChassisCharacter | read-only | current | The chassis character of the element. |
| 1.3.6.1.4.1.5812.4.5.1.12 | ColumnlogRingElemNodeId | read-only | current | The node id of the element on the ring. Value 64 means element doesn't have node id. |
| 1.3.6.1.4.1.5812.4.5.1.13 | ColumnlogRingElemRxSegCutSeverity | read-only | current | The cut severity of RX segement of this element on the ring. Cut severity indicates the effect of cutting RX segment on service level. noLoss => segment doesn'… |
| 1.3.6.1.4.1.5812.4.6 | ScalarcfgRingCount | read-only | current | The number of configured rings |
| 1.3.6.1.4.1.5812.4.7 | TablecfgRingTable | not-accessible | current | The configured ring table. The number of entries in this table is given by cfgRingCount |
| 1.3.6.1.4.1.5812.4.7.1 | RowcfgRingEntry | not-accessible | current | Entry containing information about the attributes of configured rings passing through a device |
| 1.3.6.1.4.1.5812.4.7.1.1 | ColumncfgRingRowStatus | read-write | current | The row status variable. In order to modify the attributes of the ring ring has to be put in out-of-service first. |
| 1.3.6.1.4.1.5812.4.7.1.2 | ColumncfgRingAdminCost | read-write | current | Admin cost of the ring. In the normal case, all rings should have same admin cost. Whenever a ring is needed to be serviced, increase the admin cost of the rin… |
| 1.3.6.1.4.1.5812.4.7.1.3 | ColumncfgRingName | read-write | current | The name of the configured ring |
| 1.3.6.1.4.1.5812.4.7.1.4 | ColumncfgRingMeshFactor | read-write | current | Traffic pattern on ring. The value varies between 1 (in case of hub traffic pattern)and n/2 (in case of mesh traffic pattern) where n is number of nodes in rin… |
| 1.3.6.1.4.1.5812.4.7.1.5 | ColumncfgRingEirOverSub | read-write | current | Over subscription percentage on EIR portion of BW allocated on ring |
| 1.3.6.1.4.1.5812.4.7.1.6 | ColumncfgRingProtectMode | read-write | current | The protection mode of the ring |
| 1.3.6.1.4.1.5812.4.7.1.7 | ColumncfgRingExceptNes | read-write | current | Comma separated list of IP address that are physically present on the ring but no connections are allowed to be setup. This is useful for traffic management wh… |
| 1.3.6.1.4.1.5812.4.7.1.8 | ColumncfgRingNeTopo | read-write | current | Desired topology of the ring (starting from transmit direction) in the form of comma separated list of IP addresses. If the actual topology mismatches with the… |
| 1.3.6.1.4.1.5812.4.7.1.9 | ColumncfgRingIpMode | read-write | current | Source of ip addresses of NEs. If it is gneSupplied, GNE over writes the ip address of NE from its configured tables. Otherwise it takes it from NE itself |
| 1.3.6.1.4.1.5812.4.7.1.10 | ColumncfgRingFrameMode | read-write | current | The frame mode on the ring |
| 1.3.6.1.4.1.5812.4.7.1.13 | ColumncfgRingOperStatus | read-only | current | The operational status of the configured ring |
| 1.3.6.1.4.1.5812.4.7.1.14 | ColumncfgRingCurNumTdmCkts | read-only | current | The number of TDM ckts traversing on the ring currently. |
| 1.3.6.1.4.1.5812.4.7.1.15 | ColumncfgRingCurNumFreeChans | read-only | current | The number of free channels available on the ring currently. |
| 1.3.6.1.4.1.5812.4.7.1.16 | ColumncfgRingNeAdminCost | read-write | current | The NE specific admin costs on the ring as comma separated list where list entry is of form <ip address in dotted notation>:<admin cost>. Admin costs for the N… |
| 1.3.6.1.4.1.5812.4.7.1.17 | ColumncfgRingCurNumDataCkts | read-only | current | The number of data ckts traversing on the ring currently. |
| 1.3.6.1.4.1.5812.4.7.1.18 | ColumncfgRingCurAllocTdmBwKbits | read-only | current | The bandwidth on the ring that is currently being reserved by TDM ckts passing through ring. |
| 1.3.6.1.4.1.5812.4.7.1.19 | ColumncfgRingCurAllocCirBwKbits | read-only | current | The bandwidth on the ring that is currently being reserved for CIR by data ckts passing through the ring. |
| 1.3.6.1.4.1.5812.4.7.1.20 | ColumncfgRingCurAllocEirBwKbits | read-only | current | The bandwidth on the ring that is currently being reserved for EIR by data ckts passing through the ring. |
| 1.3.6.1.4.1.5812.4.7.1.21 | ColumncfgRingCurAvailBwKbits | read-only | current | The current available bandwidth on the ring |
| 1.3.6.1.4.1.5812.4.7.1.22 | ColumncfgRingTdmAvgUtilPercent | read-only | current | Average ring utilization for TDM traffic since last reset |
| 1.3.6.1.4.1.5812.4.7.1.23 | ColumncfgRingTdmLastUtilPercent | read-only | current | Ring utilization for TDM traffic during last period. |
| 1.3.6.1.4.1.5812.4.7.1.24 | ColumncfgRingTdmMaxUtilPercent | read-only | current | Max. ring utilization for TDM traffic since last reset |
| 1.3.6.1.4.1.5812.4.7.1.25 | ColumncfgRingDataAvgUtilPercent | read-only | current | Average ring utilization for Data traffic since last reset |
| 1.3.6.1.4.1.5812.4.7.1.26 | ColumncfgRingDataLastUtilPercent | read-only | current | Ring utilization for Data traffic during last period |
| 1.3.6.1.4.1.5812.4.7.1.27 | ColumncfgRingDataMaxUtilPercent | read-only | current | Max. ring utilization for Data traffic since last reset |
| 1.3.6.1.4.1.5812.4.7.1.28 | ColumncfgRingTotalAvgUtilPercent | read-only | current | Average ring utlization for combined Data and TDM traffic |
| 1.3.6.1.4.1.5812.4.7.1.29 | ColumncfgRingTotalLastUtilPercent | read-only | current | Ring utilization for TDM and Data traffic during last period |
| 1.3.6.1.4.1.5812.4.7.1.30 | ColumncfgRingTotalMaxUtilPercent | read-only | current | Max. ring utilization for TDM and Data traffic since last reset |
| 1.3.6.1.4.1.5812.4.7.1.31 | ColumncfgRingTdmTrafficKbits | read-only | current | TDM traffic transmitted on ring since last reset |
| 1.3.6.1.4.1.5812.4.7.1.32 | ColumncfgRingTdmLastTrafficKbits | read-only | current | TDM traffic transmitted on ring during current period |
| 1.3.6.1.4.1.5812.4.7.1.33 | ColumncfgRingDataTrafficKbits | read-only | current | Data traffic transmitted on ring since last reset |
| 1.3.6.1.4.1.5812.4.7.1.34 | ColumncfgRingDataLastTrafficKbits | read-only | current | Data traffic trasnmitted on ring during last period |
| 1.3.6.1.4.1.5812.4.7.1.35 | ColumncfgRingDataNumPkts | read-only | current | Number of Data packets on ring since last reset |
| 1.3.6.1.4.1.5812.4.7.1.36 | ColumncfgRingDataLastNumPkts | read-only | current | Number of Data packets on ring during last period |
| 1.3.6.1.4.1.5812.4.7.1.37 | ColumncfgRingStatsCollElapsedTime | read-only | current | The time elapsed since the beginning of collection of ring statistics |
| 1.3.6.1.4.1.5812.4.7.1.38 | ColumncfgRingStatsPeriodTime | read-only | current | The period of status collection interval |
| 1.3.6.1.4.1.5812.4.7.1.39 | ColumncfgRingTimeSinceLastOperStatusChange | read-only | current | The time since the last change in the oper status of the ring |
| 1.3.6.1.4.1.5812.4.7.1.40 | ColumncfgRingTdmMinUtilPercent | read-only | current | Mininum ring utilization for TDM traffic since last reset |
| 1.3.6.1.4.1.5812.4.7.1.41 | ColumncfgRingDataMinUtilPercent | read-only | current | Mininum ring utilization for data traffic since last reset |
| 1.3.6.1.4.1.5812.4.7.1.42 | ColumncfgRingTotalMinUtilPercent | read-only | current | Mininum ring utilization for combined TDM and Data traffic since last reset |
| 1.3.6.1.4.1.5812.4.7.1.43 | ColumncfgRingAttUpsrSwitchCmd | read-write | current | This object defines the UPSR switch commands that amy be configured. These commands are configurable and static. The priority of the commands in relation to AP… |
| 1.3.6.1.4.1.5812.4.7.1.44 | ColumncfgRingIsRevertiveModeEnabled | read-write | current | If the revertive mode is enabled and the UPSR switch command is clear, then, if the working ring gets cut, the traffic is moved to the protected ring. When the… |
| 1.3.6.1.4.1.5812.4.7.1.45 | ColumncfgRingWaitToRestorePeriod | read-write | current | This object provide the time period in minutes between the time the working ring gets restored from the cut and the time when the traffic is reverted to the wo… |
| 1.3.6.1.4.1.5812.4.7.1.46 | ColumncfgRingCurTdmAvailBwKbits | read-only | current | The current tdm available bandwidth on the ring |
| 1.3.6.1.4.1.5812.4.7.1.47 | ColumncfgRingCurDataAvailBwKbits | read-only | current | The current pkt available bandwidth on the ring |
| 1.3.6.1.4.1.5812.4.8 | IdentityringMIB | The MIB module for coriolis rings | ||
| 1.3.6.1.4.1.5812.5 | NodelambdaStatusChange | change in the fiber status of the ring | ||
| 1.3.6.1.4.1.5812.6 | NoderingProtoErrorStatusChange | Ring error detected/cleared | ||
| 1.3.6.1.4.1.5812.7 | NoderingProtoWarnStatusChange | Ring warning detected/cleared | ||
| 1.3.6.1.4.1.5812.56 | NoderingTopoChange | Ring topology changed |