MIB Viewer

RIP-IP-PRIVATE-MIB

33 objects
Cajun Private RIP MIB
Imported Objects
OIDNameAccessStatusDescription
1.3.6.1.4.1.1751.2.43.2.10IdentitycjnRipCajun Private RIP MIB
1.3.6.1.4.1.1751.2.43.2.10.1NodecjnIpRipGblGroup
1.3.6.1.4.1.1751.2.43.2.10.1.1ScalarcjnIpRipIsEnabledread-writecurrentEnables IP RIP services on this device.
1.3.6.1.4.1.1751.2.43.2.10.1.2ScalarcjnIpRipUpdateTimerread-writecurrentRIP route Advertisement Interval (sec)
1.3.6.1.4.1.1751.2.43.2.10.1.3ScalarcjnIpRipPurgeTTLread-writecurrentTTL for purged RIP routes
1.3.6.1.4.1.1751.2.43.2.10.1.4ScalarcjnIpRipTriggeredUpdatesread-writecurrentEnable/Disable Triggered RIP updates
1.3.6.1.4.1.1751.2.43.2.10.1.5ScalarcjnIpRipInterPktDelayread-writecurrentDelay between two successive RIP route Advertisements (sec)
1.3.6.1.4.1.1751.2.43.2.10.2NodecjnIpRipStatGroup
1.3.6.1.4.1.1751.2.43.2.10.3NodecjnIpRipIfGroup
1.3.6.1.4.1.1751.2.43.2.10.3.1TablecjnIpRipIfTablenot-accessiblecurrentA list of interface specific RIP Entries
1.3.6.1.4.1.1751.2.43.2.10.3.1.1RowcjnIpRipIfEntrynot-accessiblecurrentAn cajun RIP Interface instance
1.3.6.1.4.1.1751.2.43.2.10.3.1.1.1ColumncjnIpRipIfIpAddrread-onlycurrentThe globally unique IP Address identifier for this interface. This number MUST exist in the cjnIpIfTable to be valid.
1.3.6.1.4.1.1751.2.43.2.10.3.1.1.2ColumncjnIpRipIfRowStatusread-createcurrentThe Status of this entry in the table. Note the available states: active(1), notInService(2) notReady(3), createAndGo(4), createAndWait(5) or destroy(6)
1.3.6.1.4.1.1751.2.43.2.10.3.1.1.3ColumncjnIpRipIfSendRcvModeread-createcurrentRIP Send & Receive mode setting.
1.3.6.1.4.1.1751.2.43.2.10.3.1.1.4ColumncjnIpRipIfSendVersionread-createcurrentRIP version to adhere to, while sending updates
1.3.6.1.4.1.1751.2.43.2.10.3.1.1.5ColumncjnIpRipIfRcvVersionread-createcurrentRIP version to adhere to, while receiving updates
1.3.6.1.4.1.1751.2.43.2.10.3.1.1.6ColumncjnIpRipIfDefaultRouteModeread-createcurrentRIP default route characteristics. If this MIB Object is set to talkOnly(1) then the known default route is advertised in RIP updates but ignored on incoming n…
1.3.6.1.4.1.1751.2.43.2.10.3.1.1.7ColumncjnIpRipIfPoisonMethodread-createcurrentRIP Poison Reverse Mode.
1.3.6.1.4.1.1751.2.43.2.10.3.1.1.8ColumncjnIpRipIfAuthTyperead-createcurrentRIP authentication type
1.3.6.1.4.1.1751.2.43.2.10.3.1.1.9ColumncjnIpRipIfAuthKeyread-createcurrentRIP authentication key-valid only when cjnIpRipIfAuthType is not set to NONE
1.3.6.1.4.1.1751.2.43.2.10.3.2TablecjnIpRipIfStatTablenot-accessiblecurrentA list of interface specific RIP Statictics Entries
1.3.6.1.4.1.1751.2.43.2.10.3.2.1RowcjnIpRipIfStatEntrynot-accessiblecurrentAn cajun RIP Interface Statistics instance
1.3.6.1.4.1.1751.2.43.2.10.3.2.1.1ColumncjnIpRipIfStatIpAddrread-onlycurrentThe globally unique IP Address identifier for this interface. This number MUST exist in the cjnIpIfTable to be valid.
1.3.6.1.4.1.1751.2.43.2.10.3.2.1.2ColumncjnIpRipIfUpdatesSentread-writecurrentTotal# of RIP updates sent on this if
1.3.6.1.4.1.1751.2.43.2.10.3.2.1.3ColumncjnIpRipIfUpdatesRcvdread-writecurrentTotal# of RIP updates received on this if
1.3.6.1.4.1.1751.2.43.2.10.3.2.1.4ColumncjnIpRipIfTrigUpdatesSentread-writecurrentTotal# of RIP triggered updates sent on this if
1.3.6.1.4.1.1751.2.43.2.10.3.2.1.5ColumncjnIpRipIfBadPktRcvdread-writecurrentTotal# of RIP packets received in error on this if
1.3.6.1.4.1.1751.2.43.2.10.3.2.1.6ColumncjnIpRipIfBadRoutesRcvdread-writecurrentTotal# of bad RIP network routes received in error on this if
1.3.6.1.4.1.1751.2.43.2.10.4NodecjnIpRipNeighborGroup
1.3.6.1.4.1.1751.2.43.2.10.4.1TablecjnIpRipNeighborTablenot-accessiblecurrentA list of RIP Trusted Neighbors
1.3.6.1.4.1.1751.2.43.2.10.4.1.1RowcjnIpRipNeighborEntrynot-accessiblecurrentA RIP Trusted Neighbor Entry
1.3.6.1.4.1.1751.2.43.2.10.4.1.1.1ColumncjnIpRipNeighborIpAddrread-onlycurrentThe IP Address identifier for this neighbor.
1.3.6.1.4.1.1751.2.43.2.10.4.1.1.2ColumncjnIpRipNeighborRowStatusread-createcurrentThe Status of this entry in the table. Note the available states: active(1), notInService(2) notReady(3), createAndGo(4), createAndWait(5) or destroy(6)