RND-MIB
490 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress |
| RFC1213-MIB | DisplayString ipAddrEntry PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89 | Nodernd | |||
| 1.3.6.1.4.1.89.1 | NoderndMng | |||
| 1.3.6.1.4.1.89.1.1 | ScalarrndSysId | read-only | mandatory | Identification of an RND device. The device type for each integer clarifies the sysObjectID in MIB - II. |
| 1.3.6.1.4.1.89.1.2 | ScalarrndAction | read-write | mandatory | This variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions require support of prop… |
| 1.3.6.1.4.1.89.1.3 | ScalarrndFileName | read-write | mandatory | The name of the file used internally by RND for transferring tables maintained by network devices, using a prorietary File exchange protocol. |
| 1.3.6.1.4.1.89.2 | NoderndDeviceParams | |||
| 1.3.6.1.4.1.89.2.1 | ScalarrndBridgeType | read-only | mandatory | Identification of the RND bridge type. |
| 1.3.6.1.4.1.89.2.2 | ScalarrndInactiveArpTimeOut | read-write | mandatory | This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is del… |
| 1.3.6.1.4.1.89.2.3 | NoderndBridgeAlarm | |||
| 1.3.6.1.4.1.89.2.3.1 | ScalarrndErrorDesc | read-only | mandatory | A textual description of the enterprise-specific trap sent to the Network Management Station by the RND managed device. |
| 1.3.6.1.4.1.89.2.3.2 | ScalarrndErrorSeverity | read-only | mandatory | The severity type of the enterprise-specific trap sent to the Network Management Station by the RND managed device. |
| 1.3.6.1.4.1.89.2.4 | ScalarrndBrgVersion | read-only | mandatory | The bridge version. |
| 1.3.6.1.4.1.89.2.5 | ScalarrndBrgFeatures | read-only | mandatory | A bit mask that defines the features supported by a particular configuration of this network element: __________________________________________ | Byte 1|Byte … |
| 1.3.6.1.4.1.89.2.6 | ScalarrndBrgLicense | read-write | mandatory | This parameter is used for entering a s/w license number for a device. A separate license number is supplied for each device. |
| 1.3.6.1.4.1.89.2.7 | NoderndIpHost | |||
| 1.3.6.1.4.1.89.2.7.1 | ScalarrndICMPTransmitionEnable | read-write | mandatory | This variable controlls the ability to transmit ICMP frames |
| 1.3.6.1.4.1.89.2.7.2 | TablerndCommunityTable | not-accessible | mandatory | The community table of the agent |
| 1.3.6.1.4.1.89.2.7.2.1 | RowrndCommunityEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.2.7.2.1.1 | ColumnrndCommunityMngStationAddr | read-write | mandatory | The management station that will be allowed to communicate with the agent IP address |
| 1.3.6.1.4.1.89.2.7.2.1.2 | ColumnrndCommunityString | read-write | mandatory | The community string with which the management station will communicate with the agent |
| 1.3.6.1.4.1.89.2.7.2.1.3 | ColumnrndCommunityAccess | read-write | mandatory | The allowed access to this management station |
| 1.3.6.1.4.1.89.2.7.2.1.4 | ColumnrndCommunityTrapsEnable | read-write | mandatory | Should the agent send traps to the management station |
| 1.3.6.1.4.1.89.2.7.2.1.5 | ColumnrndCommunityStatus | read-write | mandatory | The status of this entry. If the status is invalid the community entry will be deleted |
| 1.3.6.1.4.1.89.2.8 | ScalarrndManagedTime | read-write | mandatory | The time will be sent in the format hhmmss |
| 1.3.6.1.4.1.89.2.9 | ScalarrndManagedDate | read-write | mandatory | The date will be sent in the format ddmmyyyy |
| 1.3.6.1.4.1.89.2.11 | NodegenGroup | |||
| 1.3.6.1.4.1.89.2.11.1 | ScalargenGroupHWVersion | read-only | mandatory | Defines the HW version of the product. |
| 1.3.6.1.4.1.89.2.11.2 | ScalargenGroupConfigurationSymbol | read-only | mandatory | Defines the Configuration Symbol attached to any hardware module manufactured by LANNET. One single character A..Z defines the CS version. |
| 1.3.6.1.4.1.89.2.11.3 | ScalargenGroupHWStatus | read-only | mandatory | This attribute describes the status of the group hardware as detected by the sensors software. |
| 1.3.6.1.4.1.89.4 | NoderndInterface | |||
| 1.3.6.1.4.1.89.4.1 | TablerndIfTable | not-accessible | mandatory | RND-specific interface table. Each table entry includes an index, Board number, Network Address, interface status, clock indicator and interface cost. |
| 1.3.6.1.4.1.89.4.1.1 | RowrndIfEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.4.1.1.1 | ColumnrndIfIndex | read-only | mandatory | Index to the RND Interface Table. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (M… |
| 1.3.6.1.4.1.89.4.1.1.2 | ColumnrndIfBoardNum | read-only | mandatory | The interface defined by this entry correspTnds to the board defined by the same value of rndSlotBoardNum in the rndSlotTab. |
| 1.3.6.1.4.1.89.4.1.1.3 | ColumnrndIfNetAddress | read-only | mandatory | The IP address of the interface defined by the particular value of rndIfIndex. |
| 1.3.6.1.4.1.89.4.1.1.4 | ColumnrndIfStatus | read-only | mandatory | The current status of the interface. |
| 1.3.6.1.4.1.89.4.1.1.5 | ColumnrndIfClockType | read-write | mandatory | rndIfClockType defines the type of clock each interface uses: internal or external. |
| 1.3.6.1.4.1.89.4.1.1.6 | ColumnrndIfBaudRate | read-write | mandatory | Defines the baud rate of use by the interface. The valid rates are determined by the type of the media for which this baud rate is defined. |
| 1.3.6.1.4.1.89.4.1.1.7 | ColumnrndIfCost | read-write | mandatory | This variable assigns a transmission cost to the interface (channel or LAN). These costs are used in Level II routing. The costs aretypically inversly proporti… |
| 1.3.6.1.4.1.89.4.1.1.8 | ColumnrndIfCompression | read-write | mandatory | Defines whether data compression is enabled or disabled for the interface. |
| 1.3.6.1.4.1.89.4.1.1.9 | ColumnrndIfCompressionStatus | read-only | mandatory | Defines the status of the compression component: not-inserted - Compression component is not in the device active - Compression is enabled and operates correct… |
| 1.3.6.1.4.1.89.4.1.1.10 | ColumnrndIfCompressionRate | read-only | mandatory | Percentage of compression. This variable applies only if rndCompressionStatus is active. |
| 1.3.6.1.4.1.89.4.1.1.11 | ColumnrndIfLATCompression | read-write | mandatory | Enable/Disable the LAT Compression. |
| 1.3.6.1.4.1.89.4.1.1.12 | ColumnrndIfCompressionType | read-only | mandatory | This parameter indicates the type of compression option available in the device. none(1) - indicates that there is no compression option in the device lowSpeed… |
| 1.3.6.1.4.1.89.4.1.1.13 | ColumnrndIfFilterMode | read-write | mandatory | This parameter indicates the type of filtering in the device. |
| 1.3.6.1.4.1.89.4.1.1.14 | ColumnrndIfChannelType | read-write | mandatory | The type of the WAN channel |
| 1.3.6.1.4.1.89.4.1.1.15 | ColumnrndIfBridge | read-write | mandatory | This variable indicates whether this interface forward Layer II pakages. |
| 1.3.6.1.4.1.89.4.1.1.16 | ColumnrndHighPriorityIf | read-write | mandatory | This variable indicates whether this interface will forward pakages that fit HighPriority set by the manager. |
| 1.3.6.1.4.1.89.4.1.1.17 | ColumnrndWanHeader | read-write | mandatory | This variable indicates the RND WAN header type used for frames which pass through this interface. 'regular' specifies a 14 bytes header compatible with older … |
| 1.3.6.1.4.1.89.4.1.1.18 | ColumnrndDuplexMode | read-write | mandatory | This variable indicates whether this interface operates in half duplex full duplex or auto negotiation mode. |
| 1.3.6.1.4.1.89.5 | NoderouteTableOverflow | An overflow condition has occurred in the Routing Table. The Routing Table is used for IP routing algorithm (RIP). | ||
| 1.3.6.1.4.1.89.10 | NoderesetRequired | This trap indicates that in order to perform the last SET request, a reset operation of the router/bridge is required. This occurs when the layer 2 routing alg… | ||
| 1.3.6.1.4.1.89.12 | NodeendTftp | This trap indicates that in the device finished a TFTP transaction with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual … | ||
| 1.3.6.1.4.1.89.12 | NoderndIPX | |||
| 1.3.6.1.4.1.89.12.1 | NoderndIPXdriver | |||
| 1.3.6.1.4.1.89.12.2 | NoderndIPXRip | |||
| 1.3.6.1.4.1.89.12.2.10 | TablerndIPXRipFilterGlbTable | not-accessible | mandatory | The table of RIP global filters per IPX router. |
| 1.3.6.1.4.1.89.12.2.10.1 | RowrndIPXRipFilterGlbEntry | not-accessible | mandatory | An entry in the RIP global filter table |
| 1.3.6.1.4.1.89.12.2.10.1.1 | ColumnrndIPXRipFilterGlbFLtype | read-only | mandatory | Type of filter - input/output |
| 1.3.6.1.4.1.89.12.2.10.1.2 | ColumnrndIPXRipFilterGlbFLnumber | read-only | mandatory | Number of RIP filter. |
| 1.3.6.1.4.1.89.12.2.10.1.3 | ColumnrndIPXRipFilterGlbFLStatus | read-write | mandatory | The validity of this entry. An entry with this value set to invalid may be deleted from the table with IPX implementation's discretion. |
| 1.3.6.1.4.1.89.12.2.10.1.4 | ColumnrndIPXRipFilterGlbFLnetworkPatern | read-write | mandatory | Number of filtered network. Value 0xFFFFFFFF applies for any network. |
| 1.3.6.1.4.1.89.12.2.10.1.5 | ColumnrndIPXRipFilterGlbFLnetworkMask | read-write | mandatory | Network mask |
| 1.3.6.1.4.1.89.12.2.10.1.6 | ColumnrndIPXRipFilterGlbFLaction | read-write | mandatory | Filter action - permit/deny for this network |
| 1.3.6.1.4.1.89.12.2.11 | TablerndIPXRipFilterCircuitTable | not-accessible | mandatory | Table of input/output RIP filters used per IPX circuit number. |
| 1.3.6.1.4.1.89.12.2.11.1 | RowrndIPXRipFilterCircuitEntry | not-accessible | mandatory | An entry in the Circuit RIP filter table |
| 1.3.6.1.4.1.89.12.2.11.1.1 | ColumnrndIPXRipFilterCircFLIfIndex | read-only | mandatory | The Interface identifier for this filter. This value correspond to rndIPXIfIndex or ipxCircIndex for ET16 |
| 1.3.6.1.4.1.89.12.2.11.1.2 | ColumnrndIPXRipFilterCircFLType | read-only | mandatory | Type of filter - input/output |
| 1.3.6.1.4.1.89.12.2.11.1.3 | ColumnrndIPXRipFilterCircFLnumber | read-only | mandatory | Number of RIP filter for this circuit |
| 1.3.6.1.4.1.89.12.2.11.1.4 | ColumnrndIPXRipFilterCircFLStatus | read-write | mandatory | The validity of this entry. An entry with this value set to invalid may be deleted from the table with IPX implementation's discretion. |
| 1.3.6.1.4.1.89.12.2.11.1.5 | ColumnrndIPXRipFilterCircFLnetworkPatern | read-write | mandatory | Number of filtered network. Value 0xFFFFFFFF applies for any network. |
| 1.3.6.1.4.1.89.12.2.11.1.6 | ColumnrndIPXRipFilterCircFLnetworkMask | read-write | mandatory | Network mask |
| 1.3.6.1.4.1.89.12.2.11.1.7 | ColumnrndIPXRipFilterCircFLaction | read-write | mandatory | Filter action - permit/deny |
| 1.3.6.1.4.1.89.12.3 | NoderndIPXSap | |||
| 1.3.6.1.4.1.89.12.3.10 | TablerndIPXSapFilterGlbTable | not-accessible | mandatory | The table of SAP global filter susedper IPX router. |
| 1.3.6.1.4.1.89.12.3.10.1 | RowrndIPXSapFilterGlbEntry | not-accessible | mandatory | An entry in the SAP global filter table |
| 1.3.6.1.4.1.89.12.3.10.1.1 | ColumnrndIPXSapFilterGlbFLtype | read-only | mandatory | Type of filter-input/output |
| 1.3.6.1.4.1.89.12.3.10.1.2 | ColumnrndIPXSapFilterGlbFLnumber | read-only | mandatory | Number of SAP filter. |
| 1.3.6.1.4.1.89.12.3.10.1.3 | ColumnrndIPXSapFilterGlbFLStatus | read-write | mandatory | The validity of this entry. An entry with this value set to invalid may be deleted from the table with IPX implementation's discretion. |
| 1.3.6.1.4.1.89.12.3.10.1.4 | ColumnrndIPXSapFilterGlbFLnetworkPatern | read-write | mandatory | Number network of the filter edservice. Value 0xFFFFFFFF applies for any network. |
| 1.3.6.1.4.1.89.12.3.10.1.5 | ColumnrndIPXSapFilterGlbFLnetworkMask | read-write | mandatory | Network mask |
| 1.3.6.1.4.1.89.12.3.10.1.6 | ColumnrndIPXSapFilterGlbFLserviceType | read-write | mandatory | The type of the service which may be filtered ;value0xFFFF applies for all types of service and it's default |
| 1.3.6.1.4.1.89.12.3.10.1.7 | ColumnrndIPXSapFilterGlbFLserviceName | read-write | mandatory | The name of the service which may be filtered; wild cardas * may be used in end of the name. |
| 1.3.6.1.4.1.89.12.3.10.1.8 | ColumnrndIPXSapFilterGlbFLaction | read-write | mandatory | Filter mode - permit/deny for this service |
| 1.3.6.1.4.1.89.12.3.11 | TablerndIPXSapFilterCircuitTable | not-accessible | mandatory | Table of input/output SAP filter susedper IPX circuit number. |
| 1.3.6.1.4.1.89.12.3.11.1 | RowrndIPXSapFilterCircuitEntry | not-accessible | mandatory | An entry in the Circuit SAP filter table |
| 1.3.6.1.4.1.89.12.3.11.1.1 | ColumnrndIPXSapFilterCircFLIfIndex | read-only | mandatory | The Interface identifier for this filter. This value correspondtornd IPXIfIndex or ipxCircIndex for ET16 |
| 1.3.6.1.4.1.89.12.3.11.1.2 | ColumnrndIPXSapFilterCircFLtype | read-only | mandatory | Type of filter-input/output |
| 1.3.6.1.4.1.89.12.3.11.1.3 | ColumnrndIPXSapFilterCircFLnumber | read-only | mandatory | Number of SAP filter. Th is value correspondto rndIPXSapFilterNumber |
| 1.3.6.1.4.1.89.12.3.11.1.4 | ColumnrndIPXSapFilterCircFLStatus | read-write | mandatory | The validity of this entry. An entry with this value set to invalid may be deleted from the table with IPX implementation's discretion. |
| 1.3.6.1.4.1.89.12.3.11.1.5 | ColumnrndIPXSapFilterCircFLnetworkPatern | read-write | mandatory | Number network of the filtered service. Value 0xFFFFFFFF applies for any network. |
| 1.3.6.1.4.1.89.12.3.11.1.6 | ColumnrndIPXSapFilterCircFLnetworkMask | read-write | mandatory | Network mask |
| 1.3.6.1.4.1.89.12.3.11.1.7 | ColumnrndIPXSapFilterCircFLserviceType | read-write | mandatory | The type of the service which may be filtered; value 0xFFFF applies for all types of service and it's default |
| 1.3.6.1.4.1.89.12.3.11.1.8 | ColumnrndIPXSapFilterCircFLserviceName | read-write | mandatory | The name of the service which may be filtered; wild cardas * may be used i n end of the name. |
| 1.3.6.1.4.1.89.12.3.11.1.9 | ColumnrndIPXSapFilterCircFLaction | read-write | mandatory | Filter mode-permit/deny |
| 1.3.6.1.4.1.89.12.4 | NodeipxSystem | |||
| 1.3.6.1.4.1.89.12.4.1 | TableipxBasicSysTable | not-accessible | mandatory | The IPX System table - basic information. |
| 1.3.6.1.4.1.89.12.4.1.1 | RowipxBasicSysEntry | not-accessible | mandatory | Each entry corresponds to one instance of IPX running on the system. |
| 1.3.6.1.4.1.89.12.4.1.1.1 | ColumnipxBasicSysInstance | read-write | mandatory | The unique identifier of the instance of IPX to which this row corresponds. This value may be written only when creating a new entry in the table. |
| 1.3.6.1.4.1.89.12.4.1.1.2 | ColumnipxBasicSysExistState | read-write | mandatory | The validity of this entry in the IPX system table. Setting this field to off indicates that this entry may be deleted from the system table at the IPX impleme… |
| 1.3.6.1.4.1.89.12.4.1.1.3 | ColumnipxBasicSysInReceives | read-only | mandatory | The total number of IPX packets received, including those received in error. |
| 1.3.6.1.4.1.89.12.4.1.1.4 | ColumnipxBasicSysInHdrErrors | read-only | mandatory | The number of IPX packets discarded due to errors in their headers, including any IPX packet with a size less than the minimum of 30 bytes. |
| 1.3.6.1.4.1.89.12.4.1.1.5 | ColumnipxBasicSysInUnknownSockets | read-only | mandatory | The number of IPX packets discarded because the destination socket was not open. |
| 1.3.6.1.4.1.89.12.4.1.1.6 | ColumnipxBasicSysInDiscards | read-only | mandatory | The number of IPX packets received but discarded due to reasons other than those accounted for by ipxBasicSysInHdrErrors, ipxBasicSysInUnknownSockets, ipxAdvSy… |
| 1.3.6.1.4.1.89.12.4.1.1.7 | ColumnipxBasicSysInDelivers | read-only | mandatory | The total number of IPX packets delivered locally, including packets from local applications. |
| 1.3.6.1.4.1.89.12.4.1.1.8 | ColumnipxBasicSysNoRoutes | read-only | mandatory | The number of times no route to a destination was found. |
| 1.3.6.1.4.1.89.12.4.1.1.9 | ColumnipxBasicSysOutRequests | read-only | mandatory | The number of IPX packets supplied locally for transmission, not including any packets counted in ipxAdvForwPackets. |
| 1.3.6.1.4.1.89.12.4.1.1.10 | ColumnipxBasicSysOutMalformedRequests | read-only | mandatory | The number of IPX packets supplied locally that contained errors in their structure. |
| 1.3.6.1.4.1.89.12.4.1.1.11 | ColumnipxBasicSysOutDiscards | read-only | mandatory | The number of outgoing IPX packets discarded due to reasons other than those accounted for in ipxBasicSysOutMalformedRequests, ipxAdvSysOutFiltered, and ipxAdv… |
| 1.3.6.1.4.1.89.12.4.1.1.12 | ColumnipxBasicSysOutPackets | read-only | mandatory | The total number of IPX packets transmitted. |
| 1.3.6.1.4.1.89.12.5 | NodeipxCircuit | |||
| 1.3.6.1.4.1.89.12.5.1 | TableipxCircTable | not-accessible | mandatory | The Circuit table. |
| 1.3.6.1.4.1.89.12.5.1.1 | RowipxCircEntry | not-accessible | mandatory | Each entry corresponds to one circuit known to the system. |
| 1.3.6.1.4.1.89.12.5.1.1.1 | ColumnipxCircSysInstance | read-write | mandatory | The unique identifier of the instance of IPX to which this entry corresponds. This value may be written only when creating a new entry in the table. |
| 1.3.6.1.4.1.89.12.5.1.1.2 | ColumnipxCircIndex | read-write | mandatory | The identifier of this circuit, unique within the instance of IPX. This value may be written only when creating a new entry in the table. |
| 1.3.6.1.4.1.89.12.5.1.1.3 | ColumnipxCircExistState | read-write | mandatory | The validity of this circuit entry. A circuit with this value set to off may be deleted from the table at the IPX implementation's discretion. |
| 1.3.6.1.4.1.89.12.5.1.1.4 | ColumnipxCircOperState | read-only | mandatory | The operational state of the circuit. |
| 1.3.6.1.4.1.89.12.5.1.1.5 | ColumnipxCircIfIndex | read-write | mandatory | The value of ifIndex for the interface used by this circuit. This value may be written only when creating a new entry in the table. |
| 1.3.6.1.4.1.89.12.5.1.1.6 | ColumnipxCircNetNumber | read-write | mandatory | The IPX network number of this circuit. This value may be written only when creating a new entry in the table. |
| 1.3.6.1.4.1.89.12.5.1.1.7 | ColumnipxCircTimeToNet | read-write | mandatory | The time to net value associated with this interface, in term of 1/18ths of a second. |
| 1.3.6.1.4.1.89.12.5.1.1.8 | ColumnipxCircEncaps | read-write | mandatory | The encapsulation method associated with this interface. |
| 1.3.6.1.4.1.89.12.5.1.1.9 | ColumnipxCircNetbiosDeliver | read-write | mandatory | Deliver NetBios All Networks Broadcast Packets |
| 1.3.6.1.4.1.89.12.6 | NodeipxForwarding | |||
| 1.3.6.1.4.1.89.12.6.1 | TableipxDestTable | not-accessible | mandatory | The Destination table contains information about all known destinations. |
| 1.3.6.1.4.1.89.12.6.1.1 | RowipxDestEntry | not-accessible | mandatory | Each entry corresponds to one destination. |
| 1.3.6.1.4.1.89.12.6.1.1.1 | ColumnipxDestSysInstance | read-only | mandatory | The unique identifier of the instance of IPX to which this row corresponds. |
| 1.3.6.1.4.1.89.12.6.1.1.2 | ColumnipxDestNetNum | read-only | mandatory | The IPX network number of the destination. |
| 1.3.6.1.4.1.89.12.6.1.1.3 | ColumnipxDestNextHopCircIndex | read-write | mandatory | The unique identifier of the circuit used to reach the next hop. |
| 1.3.6.1.4.1.89.12.6.1.1.4 | ColumnipxDestProtocol | read-only | mandatory | The routing protocol from which knowledge of this destination was obtained. |
| 1.3.6.1.4.1.89.12.6.1.1.5 | ColumnipxDestTicks | read-write | mandatory | The delay in ticks to reach this destination. |
| 1.3.6.1.4.1.89.12.6.1.1.6 | ColumnipxDestHopCount | read-write | mandatory | The number of hops necessary to reach the destination. |
| 1.3.6.1.4.1.89.12.6.1.1.7 | ColumnipxDestNextHopNICAddress | read-write | mandatory | The NIC address of the next hop. |
| 1.3.6.1.4.1.89.12.6.1.1.8 | ColumnipxDestNextHopNetNum | read-write | mandatory | The IPX network number of the next hop. |
| 1.3.6.1.4.1.89.12.6.1.1.9 | ColumnipxDestExistState | read-write | mandatory | The validity of this entry. An entry with this value set to off may be deleted from the table at the IPX implementation's discretion. |
| 1.3.6.1.4.1.89.12.7 | NodeipxServices | |||
| 1.3.6.1.4.1.89.12.7.1 | TableipxServTable | not-accessible | mandatory | The table of services, indexed by name and type. |
| 1.3.6.1.4.1.89.12.7.1.1 | RowipxServEntry | not-accessible | mandatory | Each entry corresponds to one service. |
| 1.3.6.1.4.1.89.12.7.1.1.1 | ColumnipxServSysInstance | read-only | mandatory | The unique identifier of the instance of IPX to which this entry corresponds. |
| 1.3.6.1.4.1.89.12.7.1.1.2 | ColumnipxServType | read-write | mandatory | The service type. |
| 1.3.6.1.4.1.89.12.7.1.1.3 | ColumnipxServName | read-write | mandatory | The service name. |
| 1.3.6.1.4.1.89.12.7.1.1.4 | ColumnipxServProtocol | read-only | mandatory | The protocol from which knowledge of this service was obtained. |
| 1.3.6.1.4.1.89.12.7.1.1.5 | ColumnipxServNetNum | read-write | mandatory | The IPX network number portion of the IPX address of the service. |
| 1.3.6.1.4.1.89.12.7.1.1.6 | ColumnipxServNode | read-write | mandatory | The node portion of the IPX address of the service. |
| 1.3.6.1.4.1.89.12.7.1.1.7 | ColumnipxServSocket | read-write | mandatory | The socket portion of the IPX address of the service. |
| 1.3.6.1.4.1.89.12.7.1.1.8 | ColumnipxServHopCount | read-write | mandatory | The number of hops to the service. |
| 1.3.6.1.4.1.89.12.7.1.1.9 | ColumnipxServExistState | read-write | mandatory | The validity of this entry. An entry with this value set to off may be deleted from the table at the IPX implementation's discretion. |
| 1.3.6.1.4.1.89.12.8 | Noderipsap | |||
| 1.3.6.1.4.1.89.12.8.1 | NoderipsapSystem | |||
| 1.3.6.1.4.1.89.12.8.1.1 | TableripSysTable | not-accessible | mandatory | The RIP system table. |
| 1.3.6.1.4.1.89.12.8.1.1.1 | RowripSysEntry | not-accessible | mandatory | Each entry corresponds to one instance of RIP running on the system. |
| 1.3.6.1.4.1.89.12.8.1.1.1.1 | ColumnripSysInstance | read-write | mandatory | The unique identifier of the instance of RIP to which this row corresponds. This value links the instance of RIP to an instance of IPX running on the system (i… |
| 1.3.6.1.4.1.89.12.8.1.1.1.2 | ColumnripSysState | read-write | mandatory | Indicates the operational state of this instance of RIP. |
| 1.3.6.1.4.1.89.12.8.1.1.1.3 | ColumnripSysIncorrectPackets | read-only | mandatory | The number of times that an incorrectly formatted RIP packet was received. |
| 1.3.6.1.4.1.89.12.8.1.2 | TablesapSysTable | not-accessible | mandatory | The SAP system table. |
| 1.3.6.1.4.1.89.12.8.1.2.1 | RowsapSysEntry | not-accessible | mandatory | Each entry corresponds to one instance of SAP running on the system. |
| 1.3.6.1.4.1.89.12.8.1.2.1.1 | ColumnsapSysInstance | read-write | mandatory | The unique identifier of the instance of SAP to which this row corresponds. This value links the instance of SAP to an instance of IPX running on the system (i… |
| 1.3.6.1.4.1.89.12.8.1.2.1.2 | ColumnsapSysState | read-only | mandatory | Indicates the operational state of this instance of SAP. |
| 1.3.6.1.4.1.89.12.8.1.2.1.3 | ColumnsapSysIncorrectPackets | read-only | mandatory | The number of times that an incorrectly formatted SAP packet was received. |
| 1.3.6.1.4.1.89.12.8.2 | NoderipsapCircuit | |||
| 1.3.6.1.4.1.89.12.8.2.1 | TableripCircTable | not-accessible | mandatory | The RIP Circuit table. |
| 1.3.6.1.4.1.89.12.8.2.1.1 | RowripCircEntry | not-accessible | mandatory | Each entry corresponds to one circuit known to the system. |
| 1.3.6.1.4.1.89.12.8.2.1.1.1 | ColumnripCircSysInstance | read-write | mandatory | The unique identifier of the instance of RIP and IPX (via ipxSysInstance) to which this entry corresponds. This value may be written only when creating a new e… |
| 1.3.6.1.4.1.89.12.8.2.1.1.2 | ColumnripCircIndex | read-write | mandatory | The identifier of this circuit, unique within the instance of RIP. This value corresponds to the circuit identifier found in ipxCircIndex. This value may be wr… |
| 1.3.6.1.4.1.89.12.8.2.1.1.3 | ColumnripCircState | read-write | mandatory | Indicates whether RIP information may be sent/received over this circuit. |
| 1.3.6.1.4.1.89.12.8.2.1.1.4 | ColumnripCircUpdate | read-write | mandatory | The RIP periodic update interval, in seconds. |
| 1.3.6.1.4.1.89.12.8.2.1.1.5 | ColumnripCircAgeMultiplier | read-write | mandatory | The holding multiplier for information received in RIP periodic updates. |
| 1.3.6.1.4.1.89.12.8.2.1.1.6 | ColumnripCircOutPackets | read-only | mandatory | The number of RIP packets sent on this circuit. |
| 1.3.6.1.4.1.89.12.8.2.1.1.7 | ColumnripCircInPackets | read-only | mandatory | The number of RIP packets received on this circuit. |
| 1.3.6.1.4.1.89.12.8.2.2 | TablesapCircTable | not-accessible | mandatory | The SAP Circuit table. |
| 1.3.6.1.4.1.89.12.8.2.2.1 | RowsapCircEntry | not-accessible | mandatory | Each entry corresponds to one circuit known to the system. |
| 1.3.6.1.4.1.89.12.8.2.2.1.1 | ColumnsapCircSysInstance | read-write | mandatory | The unique identifier of the instance of SAP and IPX (via ipxSysInstance) to which this entry corresponds. This value may be written only when creating a new e… |
| 1.3.6.1.4.1.89.12.8.2.2.1.2 | ColumnsapCircIndex | read-write | mandatory | The identifier of this circuit, unique within the instance of SAP. This value corresponds to the circuit identifier found in ipxCircIndex. This value may be wr… |
| 1.3.6.1.4.1.89.12.8.2.2.1.3 | ColumnsapCircState | read-write | mandatory | Indicates whether SAP information may be sent/received over this circuit. |
| 1.3.6.1.4.1.89.12.8.2.2.1.4 | ColumnsapCircUpdate | read-write | mandatory | The SAP periodic update interval, in seconds. |
| 1.3.6.1.4.1.89.12.8.2.2.1.5 | ColumnsapCircAgeMultiplier | read-write | mandatory | The holding multiplier for information received in SAP periodic updates. |
| 1.3.6.1.4.1.89.12.8.2.2.1.6 | ColumnsapCircGetNearestServerReply | read-write | mandatory | Indicates whether to respond to SAP get nearest server requests received on this circuit. |
| 1.3.6.1.4.1.89.12.8.2.2.1.7 | ColumnsapCircOutPackets | read-only | mandatory | The number of SAP packets sent on this circuit. |
| 1.3.6.1.4.1.89.12.8.2.2.1.8 | ColumnsapCircInPackets | read-only | mandatory | The number of SAP packets received on this circuit. |
| 1.3.6.1.4.1.89.13 | NodeabortTftp | This trap indicates that in the device aborted a TFTP session with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual messa… | ||
| 1.3.6.1.4.1.89.14 | NodestartTftp | Informational trap indicating that the device has intiated a TFTP session. rndErrorDesc will contain the file type in question | ||
| 1.3.6.1.4.1.89.16 | NoderndFACS | |||
| 1.3.6.1.4.1.89.16.1 | ScalarrndFACSDefaultAction | read-write | mandatory | Used to define the default action for the device, when no FACS statements applicable to a given frame are defined. |
| 1.3.6.1.4.1.89.16.2 | TablerndFACSActTable | not-accessible | mandatory | The table of FACS action. |
| 1.3.6.1.4.1.89.16.2.1 | RowrndFACSActEntry | not-accessible | mandatory | Each rndFACSActEntry consist of the following parameters |
| 1.3.6.1.4.1.89.16.2.1.1 | ColumnrndFACSActType | read-only | mandatory | This parameter indicate on which FACS Table the FACS action will preform. |
| 1.3.6.1.4.1.89.16.2.1.2 | ColumnrndFACSActIfIndex | read-only | mandatory | The interface to which this FACS entry is applicable. |
| 1.3.6.1.4.1.89.16.2.1.3 | ColumnrndFACSAction | read-write | mandatory | The management station that sends a SET request for one of these actions with indexes rndFACSType and rndFACSIfIndex defines the type and the interface Id for … |
| 1.3.6.1.4.1.89.16.3 | TablerndFACSTable | not-accessible | mandatory | The table of FACS statment. |
| 1.3.6.1.4.1.89.16.3.1 | RowrndFACSEntry | not-accessible | mandatory | Each FACS statment consist of the following parameters |
| 1.3.6.1.4.1.89.16.3.1.1 | ColumnrndFACSIfIndex | read-only | mandatory | The interface to which this FACS entry is applicable. |
| 1.3.6.1.4.1.89.16.3.1.2 | ColumnrndFACSProtocolType | read-only | mandatory | This parameter define the protocol the Security Access Control is applicable. |
| 1.3.6.1.4.1.89.16.3.1.3 | ColumnrndFACSType | read-only | mandatory | The Mode of in which this FACS statement operates. |
| 1.3.6.1.4.1.89.16.3.1.4 | ColumnrndFACSIndex | read-only | mandatory | Index to the FACS Table. |
| 1.3.6.1.4.1.89.16.3.1.5 | ColumnrndFACSSrcAdd | read-write | mandatory | The size of the octet string will be according to the protocol type define in rndFACSProtocolType. |
| 1.3.6.1.4.1.89.16.3.1.6 | ColumnrndFACSSrcAddMask | read-write | mandatory | Source-address mask . |
| 1.3.6.1.4.1.89.16.3.1.7 | ColumnrndFACSDesAdd | read-write | mandatory | Destination-address The size of the octet string will be according to the protocol type define in rndFACSProtocolType . |
| 1.3.6.1.4.1.89.16.3.1.8 | ColumnrndFACSDesAddMask | read-write | mandatory | Destination-address mask . |
| 1.3.6.1.4.1.89.16.3.1.9 | ColumnrndFACSOperation | read-write | mandatory | ... . |
| 1.3.6.1.4.1.89.16.3.1.10 | ColumnrndFACSNetFiltering | read-write | mandatory | ... . |
| 1.3.6.1.4.1.89.16.3.1.11 | ColumnrndFACSSoketNum | read-write | mandatory | Port/socket number for different applications 0 is default meaning not applicable. |
| 1.3.6.1.4.1.89.16.3.1.12 | ColumnrndFACSMask1Id | read-write | mandatory | Index into RND mask table FACS/COD Type) . |
| 1.3.6.1.4.1.89.16.3.1.13 | ColumnrndFACSMask2Id | read-write | mandatory | Index into RND mask table FACS/COD according to the value of rndFACSType . |
| 1.3.6.1.4.1.89.16.3.1.14 | ColumnrndFACSStatus | read-write | mandatory | The status of a table entry. |
| 1.3.6.1.4.1.89.24 | NoderndBootP | |||
| 1.3.6.1.4.1.89.24.1 | ScalarrndBootPServerAddress | read-write | mandatory | The IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if this parameter is not equale to 0.0.0.0. |
| 1.3.6.1.4.1.89.24.2 | ScalarrndBootPRelaySecThreshold | read-write | mandatory | BootP requests are relayed only if their SEC field is greater or equal to the threshold value in order to allow local BootP Servers to answer first. |
| 1.3.6.1.4.1.89.26 | NodeipSpec | |||
| 1.3.6.1.4.1.89.26.1 | TablersIpAddrTable | not-accessible | mandatory | This table is parralel to MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects. |
| 1.3.6.1.4.1.89.26.1.1 | RowrsIpAddrEntry | not-accessible | mandatory | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.4.1.89.26.1.1.1 | ColumnrsIpAdEntAddr | read-only | mandatory | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.89.26.1.1.2 | ColumnrsIpAdEntIfIndex | read-write | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.89.26.1.1.3 | ColumnrsIpAdEntNetMask | read-write | mandatory | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.89.26.1.1.4 | ColumnrsIpAdEntForwardIpBroadcast | read-write | mandatory | This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net). |
| 1.3.6.1.4.1.89.26.1.1.5 | ColumnrsIpAdEntBackupAddr | read-write | mandatory | |
| 1.3.6.1.4.1.89.26.1.1.6 | ColumnrsIpAdEntStatus | read-write | mandatory | The validity of this entry. Invalid indicates that this entry is invalid in IpAddrTable (MIB II). |
| 1.3.6.1.4.1.89.26.1.1.7 | ColumnrsIpAdEntBcastAddr | read-write | mandatory | Indicates how the host part of ip subnet broadcast messages will be filled: 0 - host part will be filled by 0 1 - host part will be filled by 1. |
| 1.3.6.1.4.1.89.26.2 | NodeicmpSpec | |||
| 1.3.6.1.4.1.89.26.2.1 | ScalarrsIcmpGenErrMsgEnable | read-write | mandatory | This variable controlls the ability to generate ICMP error messages |
| 1.3.6.1.4.1.89.26.2.2 | TablersIcmpRdTable | not-accessible | mandatory | This table contains ICMP Router Discovery parameters configurated per IP interface. |
| 1.3.6.1.4.1.89.26.2.2.1 | RowrsIcmpRdEntry | not-accessible | mandatory | The ICMP parameters configurated for IP interface. |
| 1.3.6.1.4.1.89.26.2.2.1.1 | ColumnrsIcmpRdIpAddr | read-only | mandatory | The IP address to which this entry's information pertains. |
| 1.3.6.1.4.1.89.26.2.2.1.2 | ColumnrsIcmpRdIpAdvertAddr | read-write | mandatory | The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast ad… |
| 1.3.6.1.4.1.89.26.2.2.1.3 | ColumnrsIcmpRdMaxAdvertInterval | read-write | mandatory | The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 180… |
| 1.3.6.1.4.1.89.26.2.2.1.4 | ColumnrsIcmpRdMinAdvertInterval | read-write | mandatory | The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no grea… |
| 1.3.6.1.4.1.89.26.2.2.1.5 | ColumnrsIcmpRdAdvertLifetime | read-write | mandatory | The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rsIcmpRdMaxAdvertInterval and no greater than 9000… |
| 1.3.6.1.4.1.89.26.2.2.1.6 | ColumnrsIcmpRdAdvertise | read-write | mandatory | A flag indicating whether or not the address is to be advertised. |
| 1.3.6.1.4.1.89.26.2.2.1.7 | ColumnrsIcmpRdPreferenceLevel | read-write | mandatory | The preferability of the address as a default router address, relative to other router addresses on the same subnet. |
| 1.3.6.1.4.1.89.26.2.2.1.8 | ColumnrsIcmpRdEntStatus | read-write | mandatory | Setting of any value to this object set values of all fields to the default values. |
| 1.3.6.1.4.1.89.26.3 | Noderip2Spec | |||
| 1.3.6.1.4.1.89.26.3.1 | TablersRip2IfConfTable | not-accessible | mandatory | This table is extension of rip2IfConfTable (RFC 1389 ,RIP 2) |
| 1.3.6.1.4.1.89.26.3.1.1 | RowrsRip2IfConfEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.89.26.3.1.1.1 | ColumnrsRip2IfConfAddress | read-only | mandatory | The IP Address of this system on the indicated subnet. |
| 1.3.6.1.4.1.89.26.3.1.1.2 | ColumnrsRip2IfConfVirtualDis | read-write | mandatory | This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm. |
| 1.3.6.1.4.1.89.26.3.1.1.3 | ColumnrsRip2IfConfAutoSend | read-write | mandatory | This variable controls RIP automatic send behavior. If enabled and no routers were heard on the interface, RIP will only send default route with high metric. O… |
| 1.3.6.1.4.1.89.26.4 | NodearpSpec | |||
| 1.3.6.1.4.1.89.26.4.1 | ScalarrsArpDeleteTable | read-write | mandatory | Setting this object to any not-null value has the effect of deleting all entries of the ARP table. |
| 1.3.6.1.4.1.89.26.4.2 | ScalarrsArpInactiveTimeOut | read-write | mandatory | This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the … |
| 1.3.6.1.4.1.89.26.4.3 | ScalarrsArpProxy | read-write | mandatory | When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router … |
| 1.3.6.1.4.1.89.26.5 | Nodetftp | |||
| 1.3.6.1.4.1.89.26.5.1 | ScalarrsTftpRetryTimeOut | read-write | mandatory | General Retransmission time-out value (seconds) |
| 1.3.6.1.4.1.89.26.5.2 | ScalarrsTftpTotalTimeOut | read-write | mandatory | Total Retransmission time-out value (seconds) |
| 1.3.6.1.4.1.89.26.5.3 | ScalarrsSendConfigFile | read-write | mandatory | The file name include path where the Router Server will put the full configuration. The default destination address will be the sender address. |
| 1.3.6.1.4.1.89.26.5.4 | ScalarrsGetConfigFile | read-write | mandatory | The file name include path where the Router Server will get the configuration. The default source address will be the sender address. |
| 1.3.6.1.4.1.89.26.5.5 | ScalarrsLoadSoftware | read-write | mandatory | The file name include path where the Router Server will get the software. The source address will the sender address. |
| 1.3.6.1.4.1.89.26.5.6 | ScalarrsFileServerAddress | read-write | mandatory | The IP address of the configuration / sw server. |
| 1.3.6.1.4.1.89.26.6 | NodeipRedundancy | |||
| 1.3.6.1.4.1.89.26.6.1 | ScalaripRedundAdminStatus | read-write | mandatory | This parameter controle the IP Redundancy in the device. In case the the parameter in Enable and second router down. all the traffic hendle by this element. |
| 1.3.6.1.4.1.89.26.6.2 | ScalaripRedundOperStatus | read-only | mandatory | obsolete |
| 1.3.6.1.4.1.89.26.6.3 | TableipRedundRoutersTable | not-accessible | mandatory | List of IP addresses backed up by this router. |
| 1.3.6.1.4.1.89.26.6.3.1 | RowipRedundRoutersEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.26.6.3.1.1 | ColumnipRedundRoutersIfAddr | read-only | mandatory | The Ip address of the IP interface on which the redundancy feature is operational. |
| 1.3.6.1.4.1.89.26.6.3.1.2 | ColumnipRedundRoutersMainRouterAddr | read-only | mandatory | The Ip address of the polled main router. |
| 1.3.6.1.4.1.89.26.6.3.1.3 | ColumnipRedundRoutersOperStatus | read-only | mandatory | If active, the main router is considered inoperational and the IP interface operates as its backup. |
| 1.3.6.1.4.1.89.26.6.3.1.4 | ColumnipRedundRoutersPollInterval | read-write | mandatory | Polling interval for this router (in seconds). If 0 the router is not polled. |
| 1.3.6.1.4.1.89.26.6.3.1.5 | ColumnipRedundRoutersTimeout | read-write | mandatory | Interval in seconds during which the backed-up router must signal. If it does not signal, it is considered inoperational and the IP interface starts operating … |
| 1.3.6.1.4.1.89.26.6.3.1.6 | ColumnipRedundRoutersStatus | read-write | mandatory | Entry status |
| 1.3.6.1.4.1.89.26.7 | NodeipRouteLeaking | |||
| 1.3.6.1.4.1.89.26.7.1 | ScalaripLeakStaticToRip | read-write | mandatory | This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised int… |
| 1.3.6.1.4.1.89.26.7.2 | ScalaripLeakStaticToOspf | read-write | mandatory | This parameter controls leaking (redistribution) of static routes into OSPF. When enabled, all routes inserted to the IP routing table via SNMP are advertised … |
| 1.3.6.1.4.1.89.26.7.3 | ScalaripLeakOspfToRip | read-write | mandatory | This parameter controls leaking (redistribution) of routes from OSPF to RIP. If enabled, all routes learned via OSPF are advertised into RIP. |
| 1.3.6.1.4.1.89.26.7.4 | ScalaripLeakRipToOspf | read-write | mandatory | This parameter controls leaking (redistribution) of routes from RIP to OSPF. If enabled, all routes learned via RIP are advertised into OSPF as external routes. |
| 1.3.6.1.4.1.89.26.7.5 | ScalaripLeakExtDirectToOspf | read-write | mandatory | This parameter controls leaking (redistribution) into OSPF of direct routes external to OSPF, i.e. routes to local network corresponding to IP interfaces on wh… |
| 1.3.6.1.4.1.89.26.8 | NodeipRipFilter | |||
| 1.3.6.1.4.1.89.26.8.1 | TablersIpRipFilterGlbTable | not-accessible | mandatory | The table of RIP global filters per IP router. |
| 1.3.6.1.4.1.89.26.8.1.1 | RowrsIpRipFilterGlbEntry | not-accessible | mandatory | An entry in the RIP global filter table |
| 1.3.6.1.4.1.89.26.8.1.1.1 | ColumnrsIpRipFilterGlbType | read-only | mandatory | Type of filter - input/output |
| 1.3.6.1.4.1.89.26.8.1.1.2 | ColumnrsIpRipFilterGlbNumber | read-only | mandatory | Number of RIP filter. |
| 1.3.6.1.4.1.89.26.8.1.1.3 | ColumnrsIpRipFilterGlbStatus | read-write | mandatory | The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table. |
| 1.3.6.1.4.1.89.26.8.1.1.4 | ColumnrsIpRipFilterGlbIpAddr | read-write | mandatory | network prefix IP address, as in the forwarding table. |
| 1.3.6.1.4.1.89.26.8.1.1.5 | ColumnrsIpRipFilterGlbNetworkMaskBits | read-write | mandatory | the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0 |
| 1.3.6.1.4.1.89.26.8.1.1.6 | ColumnrsIpRipFilterGlbMatchBits | read-write | mandatory | the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 b… |
| 1.3.6.1.4.1.89.26.8.1.1.7 | ColumnrsIpRipFilterGlbAction | read-write | mandatory | Filter action - permit/deny for this network |
| 1.3.6.1.4.1.89.26.8.2 | TablersIpRipFilterLclTable | not-accessible | mandatory | Table of input/output RIP filters used per IP Interface. |
| 1.3.6.1.4.1.89.26.8.2.1 | RowrsIpRipFilterLclEntry | not-accessible | mandatory | An entry in the Intf RIP filter table |
| 1.3.6.1.4.1.89.26.8.2.1.1 | ColumnrsIpRipFilterLclIpIntf | read-only | mandatory | The IP address identifying the RIP interface for this filter. This value corresponds to rsIpAdEntAddr. |
| 1.3.6.1.4.1.89.26.8.2.1.2 | ColumnrsIpRipFilterLclType | read-only | mandatory | Type of filter - input/output |
| 1.3.6.1.4.1.89.26.8.2.1.3 | ColumnrsIpRipFilterLclNumber | read-only | mandatory | Number of RIP filter for this Interface |
| 1.3.6.1.4.1.89.26.8.2.1.4 | ColumnrsIpRipFilterLclStatus | read-write | mandatory | The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table. |
| 1.3.6.1.4.1.89.26.8.2.1.5 | ColumnrsIpRipFilterLclIpAddr | read-write | mandatory | network prefix IP address, as in the forwarding table. |
| 1.3.6.1.4.1.89.26.8.2.1.6 | ColumnrsIpRipFilterLclNetworkMaskBits | read-write | mandatory | the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0 |
| 1.3.6.1.4.1.89.26.8.2.1.7 | ColumnrsIpRipFilterLclMatchBits | read-write | mandatory | the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 b… |
| 1.3.6.1.4.1.89.26.8.2.1.8 | ColumnrsIpRipFilterLclAction | read-write | mandatory | Filter action - permit/deny |
| 1.3.6.1.4.1.89.26.9 | ScalarrsRipEnable | read-write | mandatory | Enables or disables RIP. |
| 1.3.6.1.4.1.89.26.10 | ScalarlreBoxAgentIP | read-write | mandatory | |
| 1.3.6.1.4.1.89.27 | NodevirtualLan | |||
| 1.3.6.1.4.1.89.27.1 | TablevirtualLanTable | not-accessible | mandatory | An entry of this table specifies an new ifIndex with a type of propVirtual(53). |
| 1.3.6.1.4.1.89.27.1.1 | RowvirtualLanEntry | not-accessible | mandatory | A list of information for each virtual LAN. |
| 1.3.6.1.4.1.89.27.1.1.1 | ColumnvlIfIndex | read-write | mandatory | An logical interface number, corresponded this VL |
| 1.3.6.1.4.1.89.27.1.1.2 | ColumnvlProto | read-write | mandatory | The protocol, supported by this VL. The meanings of the values are: other: none of the following. This VL includes any protocol except the following protocols.… |
| 1.3.6.1.4.1.89.27.1.1.3 | ColumnvlAutoConfigEnable | read-write | mandatory | It is used only in the case of IP. The meanings of the values are: true(1): Autolearning is used for this VL false(2): Autolearning isn't used for this VL from… |
| 1.3.6.1.4.1.89.27.1.1.4 | ColumnvlStatus | read-write | mandatory | It is used to delete an entry |
| 1.3.6.1.4.1.89.27.1.1.5 | ColumnvlType | read-write | mandatory | regular - ordinary type specBroadcast - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's … |
| 1.3.6.1.4.1.89.27.2 | TablevirtualLanPortsTable | not-accessible | mandatory | For each VL (a ifIndex with a type of propVirtual(53)) an entry of this table specifies a set of ports, which it contains. |
| 1.3.6.1.4.1.89.27.2.1 | RowvirtualLanPortEntry | not-accessible | mandatory | A entry of this table specifies a VL and a port belonging to it |
| 1.3.6.1.4.1.89.27.2.1.1 | ColumnvLIfIndex | read-write | mandatory | An logical interface number, corresponding to this VL |
| 1.3.6.1.4.1.89.27.2.1.2 | ColumnvLPortIfIndex | read-write | mandatory | A physical port belonging to the VL specified by vlIfIndex. |
| 1.3.6.1.4.1.89.27.2.1.3 | ColumnvLPortType | read-only | mandatory | static means configured by user dynamic means autoconfigured by the RS |
| 1.3.6.1.4.1.89.27.2.1.4 | ColumnvLPortStatus | read-write | mandatory | It is used to delete an entry |
| 1.3.6.1.4.1.89.27.3 | TablevirtualLanAutoConfTable | not-accessible | mandatory | This table specifies per a routing protocol a set of ports, from which RS will automatically learning VL in accordance with rules, defined by the protocol. |
| 1.3.6.1.4.1.89.27.3.1 | RowvirtualLanAutoConfEntry | not-accessible | mandatory | One port, specified by vlAutoConfPortIfIndex, for which the RS will automatically learn its VL in accordance with rules, defined by the protocol specified in v… |
| 1.3.6.1.4.1.89.27.3.1.1 | ColumnvlAutoConfPortIfIndex | read-write | mandatory | Port on which the autoconfig option should be supported |
| 1.3.6.1.4.1.89.27.3.1.2 | ColumnvlAutoConfProto | read-only | mandatory | Protocol for which the autoconfig option is supported for the port specified by vlAutoConfPortIfIndex |
| 1.3.6.1.4.1.89.27.3.1.3 | ColumnvlAutoConfStatus | read-write | mandatory | It is used to delete an entry |
| 1.3.6.1.4.1.89.27.4 | ScalarvirtualLanAutoConfAgingTimeout | read-write | mandatory | The units of this MIB object is seconds. Its value can be either 0 or in range 10..65535 . |
| 1.3.6.1.4.1.89.27.5 | NodevirtualLanProtocolVlan | |||
| 1.3.6.1.4.1.89.27.5.1 | ScalarvirtualLanUserEtherType | read-write | mandatory | |
| 1.3.6.1.4.1.89.27.5.2 | ScalarvirtualLanUserMask | read-write | mandatory | |
| 1.3.6.1.4.1.89.28 | NodersConf | |||
| 1.3.6.1.4.1.89.28.1 | TablersIfConfTable | not-accessible | mandatory | This table enable the user to add interface to the RS. RS will automatically add the new interface to the interface Table |
| 1.3.6.1.4.1.89.28.1.1 | RowrsIfConfEntry | not-accessible | mandatory | Each entry defines a configured interface. |
| 1.3.6.1.4.1.89.28.1.1.1 | ColumnrsIfConfIndex | read-only | mandatory | This variable uniquely identifies the interface. It is used as a cross reference in other system tables |
| 1.3.6.1.4.1.89.28.1.1.2 | ColumnrsIfConfType | read-write | mandatory | This variable identifies the type of the specific entry in the rsIfConfTable. This field is writable only at creation time (i.e., when value of status is under… |
| 1.3.6.1.4.1.89.28.1.1.3 | ColumnrsIfConfName | read-write | mandatory | This variable provides a logical name to a specific entry in rsIfConfTable |
| 1.3.6.1.4.1.89.28.1.1.4 | ColumnrsIfConfStatus | read-write | mandatory | The status of the ConfigEntry. The choices are those defined in SNMPv2-TC. Only: active, createAndWait, and destroy will be used. active - The conceptual row i… |
| 1.3.6.1.4.1.89.29 | NodersTunning | |||
| 1.3.6.1.4.1.89.29.1 | ScalarrsHighPriority | read-write | mandatory | This variable indicates the time interval the forwarding task inside the RS works in High Priority Mode. |
| 1.3.6.1.4.1.89.29.2 | ScalarrsLowPriority | read-write | mandatory | This variable indicates the time interval the forwarding task inside the RS works in Low Priority Mode. |
| 1.3.6.1.4.1.89.29.3 | ScalarrsDbgLevel | read-write | mandatory | This variable indicates the debug level the Router Server works. the range of this variable is 1..100 |
| 1.3.6.1.4.1.89.29.4 | ScalarrsDiagnostic | read-only | mandatory | This variable will contain some dignostic information in case on a problem ocurs in the RS functinality. |
| 1.3.6.1.4.1.89.29.5 | ScalarrsConfirmMessagTab | read-write | mandatory | This variable enables the operator to confirm all the message in the event Message Table. |
| 1.3.6.1.4.1.89.29.6 | TableeventMessageTable | not-accessible | mandatory | The Event Message table of the agent |
| 1.3.6.1.4.1.89.29.6.1 | RoweventMessageEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.29.6.1.1 | ColumneventNum | read-only | mandatory | The event number,the index of this table. |
| 1.3.6.1.4.1.89.29.6.1.2 | ColumneventDesc | read-only | mandatory | The event discription, this text will include time and severity. |
| 1.3.6.1.4.1.89.29.7 | NodereaTunning | |||
| 1.3.6.1.4.1.89.29.7.1 | ScalarreaIpRemoteAgingTime | read-write | mandatory | This variable specifies aging time used by the REA for remote entries in the Ip Fast Forwarding Table. |
| 1.3.6.1.4.1.89.29.7.2 | ScalarreaFftHashMaxChain | read-write | mandatory | This variable specifies the maximum length of hash chains in the Fast Forwarding Tables. |
| 1.3.6.1.4.1.89.29.7.3 | ScalarreaMltcstBitOn | read-write | mandatory | |
| 1.3.6.1.4.1.89.29.7.4 | ScalarreaIpForwardEnable | read-write | mandatory | The Platform will perform fast IP forwarding if only if this variable's value is enable. |
| 1.3.6.1.4.1.89.29.7.5 | ScalarreaIpxForwardEnable | read-write | mandatory | The Platform will perform fast IPX forwarding if only if this variable's value is enable. |
| 1.3.6.1.4.1.89.29.7.6 | ScalarreaBridgeEnable | read-write | mandatory | The Platform will perform bridging if only if this variable's value is enable. |
| 1.3.6.1.4.1.89.29.7.7 | ScalarreaFacsEnable | read-write | mandatory | The RS and Platform will perform FASC if only if this variable's value is enable. |
| 1.3.6.1.4.1.89.29.7.8 | ScalarreaIpForwardDatagrams | read-only | mandatory | The number of IP datagrams have been forwarded by the Platform. |
| 1.3.6.1.4.1.89.29.7.9 | ScalarreaIpInDiscards | read-only | mandatory | The number of IP datagrams have been dicarded by the Platform. |
| 1.3.6.1.4.1.89.29.7.10 | ScalarreaIpxForwardDatagrams | read-only | mandatory | The number of IPX datagrams have been forwarded by the Platform. |
| 1.3.6.1.4.1.89.29.7.11 | ScalarreaIpxInDiscards | read-only | mandatory | The number of IP datagrams have been dicarded by the Platform. |
| 1.3.6.1.4.1.89.29.7.12 | TablereaBridgeFftTable | not-accessible | mandatory | The Bridge Fast Forwarding Table |
| 1.3.6.1.4.1.89.29.7.12.1 | RowreaBridgeFftEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.29.7.12.1.1 | ColumnreaBrgFftEntryNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.12.1.2 | ColumnreaBrgFftMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.12.1.3 | ColumnreaBrgFftReNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.12.1.4 | ColumnreaBrgFftPortNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.12.1.5 | ColumnreaBrgFftFacsSrcIndex | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.12.1.6 | ColumnreaBrgFftFacsDstIndex | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.13 | ScalarreaBrgDiscards | read-only | mandatory | The number of bridging datagrams have been discarded by the Platform. |
| 1.3.6.1.4.1.89.29.7.14 | ScalarreaBrgForwards | read-only | mandatory | The number of bridging datagrams have been forwarded by the Platform. |
| 1.3.6.1.4.1.89.29.7.15 | TablereaIpFftTable | not-accessible | mandatory | The IP Fast Forwarding Table |
| 1.3.6.1.4.1.89.29.7.15.1 | RowreaIpFftEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.29.7.15.1.1 | ColumnreaIpFftEntryNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.2 | ColumnreaIpFftDstIpAddr | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.3 | ColumnreaIpFftDstIpMask | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.4 | ColumnreaIpFftRangeType | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.5 | ColumnreaIpFftSrcMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.6 | ColumnreaIpFftDstMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.7 | ColumnreaIpFftReNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.8 | ColumnreaIpFftPortNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.9 | ColumnreaIpFftFacsSrcIndex | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.10 | ColumnreaIpFftFacsDstIndex | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.15.1.11 | ColumnreaIpFftApplFlags | read-only | mandatory | A bit mask that defines the applications associated with this entry: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654… |
| 1.3.6.1.4.1.89.29.7.16 | TablereaIpxFftTable | not-accessible | mandatory | The IPX Fast Forwarding Table |
| 1.3.6.1.4.1.89.29.7.16.1 | RowreaIpxFftEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.29.7.16.1.1 | ColumnreaIpxFftEntryNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.2 | ColumnreaIpxFftDstNetid | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.3 | ColumnreaIpxFftRangeType | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.4 | ColumnreaIpxFftSrcMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.5 | ColumnreaIpxFftDstMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.6 | ColumnreaIpxFftReNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.7 | ColumnreaIpxFftPortNum | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.8 | ColumnreaIpxFftFacsSrcIndex | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.16.1.9 | ColumnreaIpxFftFacsDstIndex | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.17 | TablelreVnResposibilityTable | not-accessible | mandatory | The Bridge Responsibility Table |
| 1.3.6.1.4.1.89.29.7.17.1 | RowlreVnResposibilityEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.29.7.17.1.1 | ColumnlreVnRespVn | read-write | mandatory | |
| 1.3.6.1.4.1.89.29.7.17.1.2 | ColumnlreVnRespStatus | read-write | mandatory | |
| 1.3.6.1.4.1.89.29.7.18 | ScalarreaSrcViolationEnable | read-write | mandatory | The Platform will perform the Source Port Violation Procedure if only if this variable's value is enable. |
| 1.3.6.1.4.1.89.29.7.19 | ScalarreaSrcViolationTrapEnable | read-write | mandatory | The RS will send the Source Port Violation TRAP messages if only if this variable's value is enable. |
| 1.3.6.1.4.1.89.29.7.20 | ScalarreaSrcAddrValidationEnable | read-write | mandatory | The Platform will verify the source address of incoming IP datagram. |
| 1.3.6.1.4.1.89.29.7.21 | ScalarreaRsQueueDiscards | read-only | mandatory | |
| 1.3.6.1.4.1.89.29.7.22 | ScalarreaBufFree | read-only | mandatory | The number of free buffers. |
| 1.3.6.1.4.1.89.29.7.23 | ScalarlreResetDstMacBit46 | read-write | mandatory | |
| 1.3.6.1.4.1.89.29.7.24 | ScalarlreQueSourceSelect | read-write | mandatory | |
| 1.3.6.1.4.1.89.29.7.25 | ScalarlreResetDstMacBit47 | read-write | mandatory | |
| 1.3.6.1.4.1.89.29.8 | NodersMaxEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.1 | NodersMaxBridgeForwardingEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.1.1 | ScalarrsMaxBrgFrwEntries | read-only | mandatory | Maximal number of entries in bridge forwarding table. |
| 1.3.6.1.4.1.89.29.8.1.2 | ScalarrsMaxBrgFrwEntriesAfterReset | read-write | mandatory | Future maximal number of entries in bridge forwarding table. |
| 1.3.6.1.4.1.89.29.8.2 | NodersMaxIpForwardingEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.2.1 | ScalarrsMaxIpFrwEntries | read-only | mandatory | Maximal number of entries in Ip forwarding table. |
| 1.3.6.1.4.1.89.29.8.2.2 | ScalarrsMaxIpFrwEntriesAfterReset | read-write | mandatory | Future maximal number of entries in Ip forwarding table. |
| 1.3.6.1.4.1.89.29.8.3 | NodersMaxArpEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.3.1 | ScalarrsMaxArpEntries | read-only | mandatory | Maximal number of entries in Arp forwarding table. |
| 1.3.6.1.4.1.89.29.8.3.2 | ScalarrsMaxArpEntriesAfterReset | read-write | mandatory | Future maximal number of entries in Arp forwarding table. |
| 1.3.6.1.4.1.89.29.8.4 | NodersMaxIpxForwardingEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.4.1 | ScalarrsMaxIpxFrwEntries | read-only | mandatory | Maximal number of entries in Ipx forwarding table. |
| 1.3.6.1.4.1.89.29.8.4.2 | ScalarrsMaxIpxFrwEntriesAfterReset | read-write | mandatory | Future maximal number of entries in Ipx forwarding table. |
| 1.3.6.1.4.1.89.29.8.5 | NodersMaxIpxSapEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.5.1 | ScalarrsMaxIpxSapEntries | read-only | mandatory | Maximal number of entries in IpxSap table. |
| 1.3.6.1.4.1.89.29.8.5.2 | ScalarrsMaxIpxSapEntriesAfterReset | read-write | mandatory | Future maximal number of entries in IpxSap table. |
| 1.3.6.1.4.1.89.29.8.6 | NodersMaxDspClntEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.6.1 | ScalarrsMaxDspClntEntries | read-only | mandatory | Maximal number of entries in rsSdClientsTable. |
| 1.3.6.1.4.1.89.29.8.6.2 | ScalarrsMaxDspClntEntriesAfterReset | read-write | mandatory | Future maximal number of entries in rsSdClientsTable. |
| 1.3.6.1.4.1.89.29.8.7 | NodersMaxZeroHopRoutEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.7.1 | ScalarrsMaxZhrConns | read-only | mandatory | The current maximal number of direct Zero-hop routing connections. |
| 1.3.6.1.4.1.89.29.8.7.2 | ScalarrsMaxZhrConnsAfterReset | read-write | mandatory | The future (after reset) maximal number of direct Zero-hop routing connections. |
| 1.3.6.1.4.1.89.29.8.8 | NodersMaxDspFrmEntriesTuning | |||
| 1.3.6.1.4.1.89.29.8.8.1 | ScalarrsMaxDspFrmEntries | read-only | mandatory | Maximal number of entries in rsSdClientsTable. |
| 1.3.6.1.4.1.89.29.8.8.2 | ScalarrsMaxDspFrmEntriesAfterReset | read-write | mandatory | Future maximal number of entries in rsSdClientsTable. |
| 1.3.6.1.4.1.89.35 | NoderndApplications | |||
| 1.3.6.1.4.1.89.35.1 | NodersServerDispatcher | |||
| 1.3.6.1.4.1.89.35.2 | NoderndMidLevelManagement | |||
| 1.3.6.1.4.1.89.35.2.2 | NoderndAlarmOptions | |||
| 1.3.6.1.4.1.89.35.2.2.1 | ScalarrndAlarmEnabling | read-write | mandatory | Indicates whether alarms should be issued to the high-level NMS |
| 1.3.6.1.4.1.89.35.2.2.2 | ScalarrndAlarmInterval | read-write | mandatory | Indicates the minimal period of time which must pass after issuing an alarm before issuing the same alarm again. |
| 1.3.6.1.4.1.89.35.2.3 | TablerndMonitoredElementsTable | not-accessible | mandatory | The table of monitored elements of the network |
| 1.3.6.1.4.1.89.35.2.3.1 | RowrndMonitoredElementEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.2.3.1.1 | ColumnrndMonitoredElementAddress | read-only | mandatory | The IP address of the monitored element |
| 1.3.6.1.4.1.89.35.2.3.1.2 | ColumnrndMonitoredElementCommunity | read-write | mandatory | The community of the monitored element |
| 1.3.6.1.4.1.89.35.2.3.1.3 | ColumnrndMonitoredElementLabel | read-write | mandatory | The label assigned by the network manager to the monitored element |
| 1.3.6.1.4.1.89.35.2.3.1.4 | ColumnrndDefaultPollingInterval | read-write | mandatory | The default period of time between two consecutive pollings of the monitored element for the value of an object instance. If no other polling interval is speci… |
| 1.3.6.1.4.1.89.35.2.3.1.5 | ColumnrndDefaultLogFile | read-write | mandatory | The default file path of the log-file which will contain the polling results for the monitored element. If no other file path is specifically assigned to the m… |
| 1.3.6.1.4.1.89.35.2.3.1.6 | ColumnrndMonitoredElementStatus | read-write | mandatory | It is used to manage the monitored elements table and indicates the current monitoring status of an element. |
| 1.3.6.1.4.1.89.35.2.4 | TablerndMonitoringTable | not-accessible | mandatory | The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable. |
| 1.3.6.1.4.1.89.35.2.4.1 | RowrndMonitoringEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.2.4.1.1 | ColumnrndMonitoredElement | read-only | mandatory | A label assigned by the network manager to a monitored element to which this monitored object instance belongs. This label must have been previously entered in… |
| 1.3.6.1.4.1.89.35.2.4.1.2 | ColumnrndMonitoredObjectInstanceLabel | read-only | mandatory | The label assigned by the network manager to the monitored object instance |
| 1.3.6.1.4.1.89.35.2.4.1.3 | ColumnrndMonitoredObjectName | read-write | mandatory | The symbolic object type name of the object to which the monitored object instance belongs (as it appears the MIB module definition). In case of ambiguity the … |
| 1.3.6.1.4.1.89.35.2.4.1.4 | ColumnrndMonitoredObjectIdentifier | read-write | mandatory | The object identifier of the object to which the monitored object instance belongs. An instance of rndMonitoredObjectIdentifier need not be assigned any value,… |
| 1.3.6.1.4.1.89.35.2.4.1.5 | ColumnrndMonitoredObjectInstance | read-write | mandatory | The instance identifier (key) of the monitored object instance. |
| 1.3.6.1.4.1.89.35.2.4.1.6 | ColumnrndMonitoredObjectSyntax | read-write | mandatory | The syntax of the monitored object instance (i.e., the syntax of the object type of the object to which the monitored instance belongs). Need not be assigned a… |
| 1.3.6.1.4.1.89.35.2.4.1.7 | ColumnrndMonitoringInterval | read-write | mandatory | The period of time between two consecutive retrievals of the monitored object instance's value. |
| 1.3.6.1.4.1.89.35.2.4.1.8 | ColumnrndAlarmMaxTreshold | read-write | mandatory | The value of the monitored object instance, the exceeding of which will cause the generation of an alarm to the high-level management station. |
| 1.3.6.1.4.1.89.35.2.4.1.9 | ColumnrndAlarmMinTreshold | read-write | mandatory | If the value of the monitored object instance falls below the value assigned to rndAlarmMinTreshold, an alarm to the high-level management station will be issu… |
| 1.3.6.1.4.1.89.35.2.4.1.10 | ColumnrndMonitoringLogfile | read-write | mandatory | The entire path of the file in which the results of the monitoring of this object instance should be recorded. |
| 1.3.6.1.4.1.89.35.2.4.1.11 | ColumnrndMonitoringEntryStatus | read-write | mandatory | It is used to manage the monitored object instances table and indicates the current monitoring status of an object instance. |
| 1.3.6.1.4.1.89.35.2.5 | TablerndMibFilesTable | not-accessible | mandatory | The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable. |
| 1.3.6.1.4.1.89.35.2.5.1 | RowrndMibFileEntry | not-accessible | mandatory | The row definition for this table. |
| 1.3.6.1.4.1.89.35.2.5.1.1 | ColumnrndMibFileIndex | read-only | mandatory | The number of the MIB file in the list MIB files supported by the Mid-Level management station. The order of the MIB files in this list must reflect the the IM… |
| 1.3.6.1.4.1.89.35.2.5.1.2 | ColumnrndMibFilePath | read-write | mandatory | The path of the MIB file in the MIB file server. |
| 1.3.6.1.4.1.89.35.2.5.1.3 | ColumnrndMibFileRefresh | read-write | mandatory | Indicates if the file should be fetched after setting this entry from the MIB file server. |
| 1.3.6.1.4.1.89.35.2.5.1.4 | ColumnrndMibFileEntryStatus | read-write | mandatory | It is used to manage the MIB files table. |
| 1.3.6.1.4.1.89.35.2.6 | ScalarrndHardwareConfiguration | read-write | mandatory | Indicates whether the current SET SNMP PDU contains hardware configuration (i.e., normally read-only variables). SET of such variables in the Mid-level managem… |
| 1.3.6.1.4.1.89.35.2.7 | ScalarrndEraseSimulatedConfiguration | read-write | mandatory | eraseSimulatedConfiguration instructs the MLNMS to erase all the simulated configuration from its configuration data-base (CDB). This the only accepted value f… |
| 1.3.6.1.4.1.89.35.2.8 | TablerndDeleteValuesTable | not-accessible | mandatory | This table indicates which MIB variables are row status fields which control the status of the entry to which they belong. This table also indicates which (int… |
| 1.3.6.1.4.1.89.35.2.8.1 | RowrndDeleteValuesEntry | not-accessible | mandatory | The row definition for the rndDeleteValuesTable table. |
| 1.3.6.1.4.1.89.35.2.8.1.1 | ColumnrndRowStatusVariableName | read-write | mandatory | The name of the row status field. This name may not necessarily be any name which is present in the MIBs loaded into the MLNMS station. |
| 1.3.6.1.4.1.89.35.2.8.1.2 | ColumnrndRowStatusObjectId | read-write | mandatory | The object id of the row status field. If the rndRowStatusVariableName is a name present in the MIBs loaded into the MLNMS, this MIB variable is not required, … |
| 1.3.6.1.4.1.89.35.2.8.1.3 | ColumnrndRowDeleteValue | read-write | mandatory | The value of the variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause the deletion of t… |
| 1.3.6.1.4.1.89.35.2.8.1.4 | ColumnrndDeleteValueEntryStatus | read-write | mandatory | It is used to delete an entry from this table. |
| 1.3.6.1.4.1.89.35.3 | NodersIpZeroHopRouting | |||
| 1.3.6.1.4.1.89.35.3.1 | ScalarrsIpZhrGeneralStatus | read-write | mandatory | This parameter enables or disables the IP Zero Hop Routing feature for all IP interfaces. The IP Zero Hop Routing feature can also be enabled or disabled on ea… |
| 1.3.6.1.4.1.89.35.3.2 | ScalarrsIpZhrAgingTimeout | read-write | mandatory | This parameter controls the aging time-out in seconds of direct connections which were allocated. The virtual IP address of a direct connection whose time-out … |
| 1.3.6.1.4.1.89.35.3.3 | TablersIpZhrStatusTable | not-accessible | mandatory | The administrative status of the ZHR feature per ip interface. |
| 1.3.6.1.4.1.89.35.3.3.1 | RowrsIpZhrStatusEntry | not-accessible | mandatory | An entry in the ZHR status table. |
| 1.3.6.1.4.1.89.35.3.3.1.1 | ColumnrsIpZhrStatusIpIntf | read-only | mandatory | The Ip interface whose ZHR feature status is accessed. |
| 1.3.6.1.4.1.89.35.3.3.1.2 | ColumnrsIpZhrAdminStatus | read-write | mandatory | It is used to control whether ZHR will operate on the interface. |
| 1.3.6.1.4.1.89.35.3.4 | TablersIpZhrVirtAddressTable | not-accessible | mandatory | The table of free virtual IP addresses which may be allocated to establish direct connections - Per IP Interface. |
| 1.3.6.1.4.1.89.35.3.4.1 | RowrsIpZhrVirtAddressEntry | not-accessible | mandatory | An entry in the ZHR virtual IP addresses table |
| 1.3.6.1.4.1.89.35.3.4.1.1 | ColumnrsIpZhrVirtAddressIpIntf | read-only | mandatory | The Ip Interface to which the IP addresses in this entry are allocated. |
| 1.3.6.1.4.1.89.35.3.4.1.2 | ColumnrsIpZhrVirtAddressTo | read-only | mandatory | The last free IP address in the block. |
| 1.3.6.1.4.1.89.35.3.4.1.3 | ColumnrsIpZhrVirtAddressFrom | read-write | mandatory | The first free IP address in the block. |
| 1.3.6.1.4.1.89.35.3.4.1.4 | ColumnrsIpZhrVirtAddressStatus | read-write | mandatory | It is used to manage the virtual address table. The supported actions will be active, createAndGo and destroy. |
| 1.3.6.1.4.1.89.35.3.5 | TablersIpZhrConnectionsTable | not-accessible | mandatory | Table of the currently active direct connections. |
| 1.3.6.1.4.1.89.35.3.5.1 | RowrsIpZhrConnectionEntry | not-accessible | mandatory | An entry in the ZHR Connection table |
| 1.3.6.1.4.1.89.35.3.5.1.1 | ColumnrsIpZhrConnectionIpIntf | read-only | mandatory | The IP Interface for which this direct connection was established. |
| 1.3.6.1.4.1.89.35.3.5.1.2 | ColumnrsIpZhrConnectionSrcIp | read-only | mandatory | The source IP Address of this direct connection. |
| 1.3.6.1.4.1.89.35.3.5.1.3 | ColumnrsIpZhrConnectionDestIp | read-only | mandatory | The destination IP Address of this direct connection. |
| 1.3.6.1.4.1.89.35.3.5.1.4 | ColumnrsIpZhrConnectionVirtualIp | read-only | mandatory | The virtual IP address allocated for this direct connection. |
| 1.3.6.1.4.1.89.35.3.5.1.5 | ColumnrsIpZhrConnectionType | read-only | mandatory | The type of this direct connection. dynamic - established by the RS. disabled - established by the RS. The RS detected that the virtual address is already used… |
| 1.3.6.1.4.1.89.35.3.5.1.6 | ColumnrsIpZhrConnectionAge | read-only | mandatory | The age of the connection in seconds. |
| 1.3.6.1.4.1.89.35.3.5.1.7 | ColumnrsIpZhrConnectionStatus | read-write | mandatory | It is used to manage the connections table. The supported actions will be active, createAndGo and destroy. |
| 1.3.6.1.4.1.89.36 | NodeipxRipTblOverflow | This trap indicates that in an OpenGate IPX RIP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity… | ||
| 1.3.6.1.4.1.89.37 | NodeipxSapTblOverflow | This trap indicates that in an OpenGate IPX SAP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity… | ||
| 1.3.6.1.4.1.89.49 | NodefacsAccessVoilation | This trap indicates that message that fits FACS statenebt with operation blockAndReport was forward to the interface.The bound variable rndErrorDesc, rndErrorS… | ||
| 1.3.6.1.4.1.89.50 | NodeautoConfigurationCompleted | This trap indicates that auto comfiguration completetd succssefully. The bound variable rndErrorDesc, rndErrorSeverity(== info ) | ||
| 1.3.6.1.4.1.89.51 | NodeforwardingTabOverflow | This trap indicates that an overflow condition has occurred in the layer II Forward Table. The bound variable rndErrorDesc, rndErrorSeverity(== warning ) | ||
| 1.3.6.1.4.1.89.61 | NodeerrorsDuringInit | |||
| 1.3.6.1.4.1.89.66 | NodevlanDynPortAdded | |||
| 1.3.6.1.4.1.89.67 | NodevlanDynPortRemoved | |||
| 1.3.6.1.4.1.89.68 | NodersSDclientsTableOverflow | This warning is generated when an overflow occurs in the clients table. | ||
| 1.3.6.1.4.1.89.69 | NodersSDinactiveServer | This warning is generated when a server does not respond to the dispatchers polling and is thought to be inactive. | ||
| 1.3.6.1.4.1.89.70 | NodersIpZhrConnectionsTableOverflow | The Zero Hop Routing connections Table has been overflown. | ||
| 1.3.6.1.4.1.89.71 | NodersIpZhrReqStaticConnNotAccepted | The requested static connection was not accepted because there is no available IP virtual address to allocate to it. | ||
| 1.3.6.1.4.1.89.72 | NodersIpZhrVirtualIpAsSource | The virtual IP address appeared as a source IP. All the connections using it will be deleted and it will not be further allocated to new connections. | ||
| 1.3.6.1.4.1.89.73 | NodersIpZhrNotAllocVirtualIp | The source IP address sent an ARP specifying a virtual IP which was not allocated for this source. This virtual IP will not be allocated to connections of this… | ||
| 1.3.6.1.4.1.89.74 | NodersSnmpSetRequestInSpecialCfgState | An incoming SNMP SET request was rejected because no such requests (except action requests) are accepted after start of new configuration reception or during s… | ||
| 1.3.6.1.4.1.89.141 | NodersWSDRedundancySwitch | Whenever main server fails and backup takes over or server comes up after failure a trap of this type is issued. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| NetNumber | OCTET STRING (SIZE(4)) | ||
| RowStatus | INTEGER { active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) } | ||
| RsIfType | INTEGER | ||
| TruthValue | INTEGER { true (1), false (2) } |