MIB Viewer

RS-232-MIB

58 objects
The MIB module for RS-232-like hardware devices.
Imported Objects
IF-MIBInterfaceIndex
RFC1213-MIBtransmission
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY OBJECT-TYPE
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.33Identityrs232The MIB module for RS-232-like hardware devices.
1.3.6.1.2.1.10.33.1Scalarrs232Numberread-onlycurrentThe number of ports (regardless of their current state) in the RS-232-like general port table.
1.3.6.1.2.1.10.33.2Tablers232PortTablenot-accessiblecurrentA list of port entries. The number of entries is given by the value of rs232Number.
1.3.6.1.2.1.10.33.2.1Rowrs232PortEntrynot-accessiblecurrentStatus and parameter values for a port.
1.3.6.1.2.1.10.33.2.1.1Columnrs232PortIndexread-onlycurrentThe value of ifIndex for the port. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remai…
1.3.6.1.2.1.10.33.2.1.2Columnrs232PortTyperead-onlycurrentThe port's hardware type.
1.3.6.1.2.1.10.33.2.1.3Columnrs232PortInSigNumberread-onlycurrentThe number of input signals for the port in the input signal table (rs232PortInSigTable). The table contains entries only for those signals the software can de…
1.3.6.1.2.1.10.33.2.1.4Columnrs232PortOutSigNumberread-onlycurrentThe number of output signals for the port in the output signal table (rs232PortOutSigTable). The table contains entries only for those signals the software can…
1.3.6.1.2.1.10.33.2.1.5Columnrs232PortInSpeedread-writecurrentThe port's input speed in bits per second. Note that non-standard values, such as 9612, are probably not allowed on most implementations.
1.3.6.1.2.1.10.33.2.1.6Columnrs232PortOutSpeedread-writecurrentThe port's output speed in bits per second. Note that non-standard values, such as 9612, are probably not allowed on most implementations.
1.3.6.1.2.1.10.33.2.1.7Columnrs232PortInFlowTyperead-writecurrentThe port's type of input flow control. 'none' indicates no flow control at this level. 'ctsRts' and 'dsrDtr' indicate use of the indicated hardware signals.
1.3.6.1.2.1.10.33.2.1.8Columnrs232PortOutFlowTyperead-writecurrentThe port's type of output flow control. 'none' indicates no flow control at this level. 'ctsRts' and 'dsrDtr' indicate use of the indicated hardware signals.
1.3.6.1.2.1.10.33.3Tablers232AsyncPortTablenot-accessiblecurrentA list of asynchronous port entries. Entries need not exist for synchronous ports.
1.3.6.1.2.1.10.33.3.1Rowrs232AsyncPortEntrynot-accessiblecurrentStatus and parameter values for an asynchronous port.
1.3.6.1.2.1.10.33.3.1.1Columnrs232AsyncPortIndexread-onlycurrentA unique value for each port. Its value is the same as rs232PortIndex for the port.
1.3.6.1.2.1.10.33.3.1.2Columnrs232AsyncPortBitsread-writecurrentThe port's number of bits in a character.
1.3.6.1.2.1.10.33.3.1.3Columnrs232AsyncPortStopBitsread-writecurrentThe port's number of stop bits.
1.3.6.1.2.1.10.33.3.1.4Columnrs232AsyncPortParityread-writecurrentThe port's sense of a character parity bit.
1.3.6.1.2.1.10.33.3.1.5Columnrs232AsyncPortAutobaudread-writecurrentA control for the port's ability to automatically sense input speed. When rs232PortAutoBaud is 'enabled', a port may autobaud to values different from the set …
1.3.6.1.2.1.10.33.3.1.6Columnrs232AsyncPortParityErrsread-onlycurrentTotal number of characters with a parity error, input from the port since system re-initialization and while the port state was 'up' or 'test'.
1.3.6.1.2.1.10.33.3.1.7Columnrs232AsyncPortFramingErrsread-onlycurrentTotal number of characters with a framing error, input from the port since system re-initialization and while the port state was 'up' or 'test'.
1.3.6.1.2.1.10.33.3.1.8Columnrs232AsyncPortOverrunErrsread-onlycurrentTotal number of characters with an overrun error, input from the port since system re-initialization and while the port state was 'up' or 'test'.
1.3.6.1.2.1.10.33.4Tablers232SyncPortTablenot-accessiblecurrentA list of asynchronous port entries. Entries need not exist for synchronous ports.
1.3.6.1.2.1.10.33.4.1Rowrs232SyncPortEntrynot-accessiblecurrentStatus and parameter values for a synchronous port.
1.3.6.1.2.1.10.33.4.1.1Columnrs232SyncPortIndexread-onlycurrentA unique value for each port. Its value is the same as rs232PortIndex for the port.
1.3.6.1.2.1.10.33.4.1.2Columnrs232SyncPortClockSourceread-writecurrentSource of the port's bit rate clock. 'split' means the transmit clock is internal and the receive clock is external.
1.3.6.1.2.1.10.33.4.1.3Columnrs232SyncPortFrameCheckErrsread-onlycurrentTotal number of frames with an invalid frame check sequence, input from the port since system re-initialization and while the port state was 'up' or 'test'.
1.3.6.1.2.1.10.33.4.1.4Columnrs232SyncPortTransmitUnderrunErrsread-onlycurrentTotal number of frames that failed to be transmitted on the port since system re-initialization and while the port state was 'up' or 'test' because data was no…
1.3.6.1.2.1.10.33.4.1.5Columnrs232SyncPortReceiveOverrunErrsread-onlycurrentTotal number of frames that failed to be received on the port since system re-initialization and while the port state was 'up' or 'test' because the receiver d…
1.3.6.1.2.1.10.33.4.1.6Columnrs232SyncPortInterruptedFramesread-onlycurrentTotal number of frames that failed to be received or transmitted on the port due to loss of modem signals since system re-initialization and while the port sta…
1.3.6.1.2.1.10.33.4.1.7Columnrs232SyncPortAbortedFramesread-onlycurrentNumber of frames aborted on the port due to receiving an abort sequence since system re-initialization and while the port state was 'up' or 'test'.
1.3.6.1.2.1.10.33.4.1.8Columnrs232SyncPortRoleread-writecurrentThe role the device is playing that is using this port. dte means the device is performing the role of data terminal equipment dce means the device is performi…
1.3.6.1.2.1.10.33.4.1.9Columnrs232SyncPortEncodingread-writecurrentThe bit stream encoding technique that is in effect for this port. nrz for Non-Return to Zero encoding nrzi for Non-Return to Zero Inverted encoding.
1.3.6.1.2.1.10.33.4.1.10Columnrs232SyncPortRTSControlread-writecurrentThe method used to control the Request To Send (RTS) signal. controlled when the DTE is asserts RTS each time data needs to be transmitted and drops RTS at som…
1.3.6.1.2.1.10.33.4.1.11Columnrs232SyncPortRTSCTSDelayread-writecurrentThe interval (in milliseconds) that the DCE must wait after it sees RTS asserted before asserting CTS. This object exists in support of older synchronous devic…
1.3.6.1.2.1.10.33.4.1.12Columnrs232SyncPortModeread-writecurrentThe mode of operation of the port with respect to the direction and simultaneity of data transfer. fdx when frames on the data link can be transmitted and rece…
1.3.6.1.2.1.10.33.4.1.13Columnrs232SyncPortIdlePatternread-writecurrentThe bit pattern used to indicate an idle line.
1.3.6.1.2.1.10.33.4.1.14Columnrs232SyncPortMinFlagsread-writecurrentThe minimum number of flag patterns this port needs in order to recognize the end of one frame and the start of the next. Plausible values are 1 and 2.
1.3.6.1.2.1.10.33.5Tablers232InSigTablenot-accessiblecurrentA list of port input control signal entries implemented and visible to the software on the port, and useful to monitor.
1.3.6.1.2.1.10.33.5.1Rowrs232InSigEntrynot-accessiblecurrentInput control signal status for a hardware port.
1.3.6.1.2.1.10.33.5.1.1Columnrs232InSigPortIndexread-onlycurrentThe value of rs232PortIndex for the port to which this entry belongs.
1.3.6.1.2.1.10.33.5.1.2Columnrs232InSigNameread-onlycurrentIdentification of a hardware signal, as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dtr Data Terminal Ready ri Ring Indicator dcd Receive…
1.3.6.1.2.1.10.33.5.1.3Columnrs232InSigStateread-onlycurrentThe current signal state.
1.3.6.1.2.1.10.33.5.1.4Columnrs232InSigChangesread-onlycurrentThe number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'.
1.3.6.1.2.1.10.33.6Tablers232OutSigTablenot-accessiblecurrentA list of port output control signal entries implemented and visible to the software on the port, and useful to monitor.
1.3.6.1.2.1.10.33.6.1Rowrs232OutSigEntrynot-accessiblecurrentOutput control signal status for a hardware port.
1.3.6.1.2.1.10.33.6.1.1Columnrs232OutSigPortIndexread-onlycurrentThe value of rs232PortIndex for the port to which this entry belongs.
1.3.6.1.2.1.10.33.6.1.2Columnrs232OutSigNameread-onlycurrentIdentification of a hardware signal, as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dtr Data Terminal Ready ri Ring Indicator dcd Receive…
1.3.6.1.2.1.10.33.6.1.3Columnrs232OutSigStateread-onlycurrentThe current signal state.
1.3.6.1.2.1.10.33.6.1.4Columnrs232OutSigChangesread-onlycurrentThe number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'.
1.3.6.1.2.1.10.33.7Noders232Conformance
1.3.6.1.2.1.10.33.7.1Noders232Groups
1.3.6.1.2.1.10.33.7.1.1Grouprs232GroupcurrentA collection of objects providing information applicable to all RS-232-like interfaces.
1.3.6.1.2.1.10.33.7.1.2Grouprs232AsyncGroupcurrentA collection of objects providing information applicable to asynchronous RS-232-like interfaces.
1.3.6.1.2.1.10.33.7.1.3Grouprs232SyncGroupcurrentA collection of objects providing information applicable to synchronous RS-232-like interfaces.
1.3.6.1.2.1.10.33.7.1.4Grouprs232SyncSDLCGroupcurrentA collection of objects providing information applicable to synchronous RS-232-like interfaces running SDLC.
1.3.6.1.2.1.10.33.7.2Noders232Compliances
1.3.6.1.2.1.10.33.7.2.1Compliancers232CompliancecurrentThe compliance statement for SNMPv2 entities which have RS-232-like hardware interfaces.
MIB Viewer