RS232-MIB
41 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter experimental |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.3.20 | Noders232 | |||
| 1.3.6.1.3.20.1 | Scalarrs232Number | read-only | mandatory | The number of ports (regardless of their current state) in the RS-232-like general port table. |
| 1.3.6.1.3.20.2 | Tablers232PortTable | not-accessible | mandatory | A list of port entries. The number of entries is given by the value of rs232Number. |
| 1.3.6.1.3.20.2.1 | Rowrs232PortEntry | not-accessible | mandatory | Status and parameter values for a port. |
| 1.3.6.1.3.20.2.1.1 | Columnrs232PortIndex | read-only | mandatory | A unique value for each port. Its value ranges between 1 and the value of rs232Number. By convention and if possible, hardware port numbers map directly to ext… |
| 1.3.6.1.3.20.2.1.2 | Columnrs232PortType | read-only | mandatory | The port's hardware type. |
| 1.3.6.1.3.20.2.1.3 | Columnrs232PortInSigNumber | read-only | mandatory | The number of input signals for the port in the input signal table (rs232PortInSigTable). The table contains entries only for those signals the software can de… |
| 1.3.6.1.3.20.2.1.4 | Columnrs232PortOutSigNumber | read-only | mandatory | The number of output signals for the port in the output signal table (rs232PortOutSigTable). The table contains entries only for those signals the software can… |
| 1.3.6.1.3.20.2.1.5 | Columnrs232PortInSpeed | read-write | mandatory | The port's input speed in bits per second. |
| 1.3.6.1.3.20.2.1.6 | Columnrs232PortOutSpeed | read-write | mandatory | The port's output speed in bits per second. |
| 1.3.6.1.3.20.3 | Tablers232AsyncPortTable | not-accessible | mandatory | A list of asynchronous port entries. The maximum entry number is given by the value of rs232Number. Entries need not exist for synchronous ports. |
| 1.3.6.1.3.20.3.1 | Rowrs232AsyncPortEntry | not-accessible | mandatory | Status and parameter values for an asynchronous port. |
| 1.3.6.1.3.20.3.1.1 | Columnrs232AsyncPortIndex | read-only | mandatory | A unique value for each port. Its value is the same as rs232PortIndex for the port. |
| 1.3.6.1.3.20.3.1.2 | Columnrs232AsyncPortBits | read-write | mandatory | The port's number of bits in a character. |
| 1.3.6.1.3.20.3.1.3 | Columnrs232AsyncPortStopBits | read-write | mandatory | The port's number of stop bits. |
| 1.3.6.1.3.20.3.1.4 | Columnrs232AsyncPortParity | read-write | mandatory | The port's sense of a character parity bit. |
| 1.3.6.1.3.20.3.1.5 | Columnrs232AsyncPortAutobaud | read-write | mandatory | A control for the port's ability to automatically sense input speed. When rs232PortAutoBaud is 'enabled', a port may autobaud to values different from the set … |
| 1.3.6.1.3.20.3.1.6 | Columnrs232AsyncPortParityErrs | read-only | mandatory | Total number of characters with a parity error, input from the port since system re-initialization and while the port state was 'up' or 'test'. |
| 1.3.6.1.3.20.3.1.7 | Columnrs232AsyncPortFramingErrs | read-only | mandatory | Total number of characters with a framing error, input from the port since system re-initialization and while the port state was 'up' or 'test'. |
| 1.3.6.1.3.20.3.1.8 | Columnrs232AsyncPortOverrunErrs | read-only | mandatory | Total number of characters with an overrun error, input from the port since system re-initialization and while the port state was 'up' or 'test'. |
| 1.3.6.1.3.20.4 | Tablers232SyncPortTable | not-accessible | mandatory | A list of synchronous port entries. The maximum entry number is given by the value of rs232Number. Entries need not exist for asynchronous ports. |
| 1.3.6.1.3.20.4.1 | Rowrs232SyncPortEntry | not-accessible | mandatory | Status and parameter values for a synchronous port. |
| 1.3.6.1.3.20.4.1.1 | Columnrs232SyncPortIndex | read-only | mandatory | A unique value for each port. Its value is the same as rs232PortIndex for the port. |
| 1.3.6.1.3.20.4.1.2 | Columnrs232SyncPortClockSource | read-write | mandatory | Source of the port's bit rate clock. 'split' means the tranmit clock is internal and the receive clock is external. |
| 1.3.6.1.3.20.4.1.3 | Columnrs232SyncPortFrameCheckErrs | read-only | mandatory | Total number of frames with an invalid frame check sequence, input from the port since system re-initialization and while the port state was 'up' or 'test'. |
| 1.3.6.1.3.20.4.1.4 | Columnrs232SyncPortTransmitUnderrunErrs | read-only | mandatory | Total number of frames that failed to be transmitted on the port since system re-initialization and while the port state was 'up' or 'test' because data was no… |
| 1.3.6.1.3.20.4.1.5 | Columnrs232SyncPortReceiveOverrunErrs | read-only | mandatory | Total number of frames that failed to be received on the port since system re-initialization and while the port state was 'up' or 'test' because the receiver d… |
| 1.3.6.1.3.20.4.1.6 | Columnrs232SyncPortInterruptedFrames | read-only | mandatory | Total number of frames that failed to be received or transmitted on the port due to loss of modem signals since system re-initialization and while the port sta… |
| 1.3.6.1.3.20.4.1.7 | Columnrs232SyncPortAbortedFrames | read-only | mandatory | Number of frames aborted on the port due to receiving an abort sequence since system re-initialization and while the port state was 'up' or 'test'. |
| 1.3.6.1.3.20.5 | Tablers232InSigTable | not-accessible | mandatory | A list of port input control signal entries. |
| 1.3.6.1.3.20.5.1 | Rowrs232InSigEntry | not-accessible | mandatory | Input control signal status for a hardware port. |
| 1.3.6.1.3.20.5.1.1 | Columnrs232InSigPortIndex | read-only | mandatory | The value of rs232PortIndex for the port to which this entry belongs. |
| 1.3.6.1.3.20.5.1.2 | Columnrs232InSigName | read-only | mandatory | Identification of a hardware signal, as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dtr Data Terminal Ready ri Ring Indicator dcd Receive… |
| 1.3.6.1.3.20.5.1.3 | Columnrs232InSigState | read-only | mandatory | The current signal state. |
| 1.3.6.1.3.20.5.1.4 | Columnrs232InSigChanges | read-only | mandatory | The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'. |
| 1.3.6.1.3.20.6 | Tablers232OutSigTable | not-accessible | mandatory | A list of port output control signal entries. |
| 1.3.6.1.3.20.6.1 | Rowrs232OutSigEntry | not-accessible | mandatory | Output control signal status for a hardware port. |
| 1.3.6.1.3.20.6.1.1 | Columnrs232OutSigPortIndex | read-only | mandatory | The value of rs232PortIndex for the port to which this entry belongs. |
| 1.3.6.1.3.20.6.1.2 | Columnrs232OutSigName | read-only | mandatory | Identification of a hardware signal, as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dtr Data Terminal Ready ri Ring Indicator dcd Receive… |
| 1.3.6.1.3.20.6.1.3 | Columnrs232OutSigState | read-only | mandatory | The current signal state. |
| 1.3.6.1.3.20.6.1.4 | Columnrs232OutSigChanges | read-only | mandatory | The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'. |