RUGGEDCOM-DIGITAL-INPUTS-MIB
20 objects
RuggedCom MIB for Managing Digital Inputs on RuggedCom Devices.
Imported Objects
| RUGGEDCOM-MIB | ruggedcomMgmt |
| RUGGEDCOM-TRAPS-MIB | ruggedcomTraps |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15004.4.8 | IdentityrcDigitalInputs | RuggedCom MIB for Managing Digital Inputs on RuggedCom Devices. | ||
| 1.3.6.1.4.1.15004.4.8.1 | NodercDigitalInputsParams | |||
| 1.3.6.1.4.1.15004.4.8.1.1 | TablercDigitalInputsTable | not-accessible | current | A list of Digital Iputs table entries. |
| 1.3.6.1.4.1.15004.4.8.1.1.1 | RowrcDigitalInputsEntry | not-accessible | current | Configuration and status parameters for a Digital Input. |
| 1.3.6.1.4.1.15004.4.8.1.1.1.1 | ColumnrcDiID | not-accessible | current | The physical Digital Input ID of the device for which this Entry contains configuration settings. |
| 1.3.6.1.4.1.15004.4.8.1.1.1.2 | ColumnrcDiAlarm | read-write | current | Enable or disable alarm for this sigital input. |
| 1.3.6.1.4.1.15004.4.8.1.1.1.3 | ColumnrcDiActiveState | read-write | current | A state that would activate alarm for this digital input. |
| 1.3.6.1.4.1.15004.4.8.1.1.1.4 | ColumnrcDiDelayOn | read-write | current | A time for which the input must be active before the alarm is activated. |
| 1.3.6.1.4.1.15004.4.8.1.1.1.5 | ColumnrcDiDelayOff | read-write | current | A time for which the input must be inactive before the alarm is deactivated. |
| 1.3.6.1.4.1.15004.4.8.1.1.1.6 | ColumnrcDiDescription | read-write | current | Current digital input state read from hardware. |
| 1.3.6.1.4.1.15004.4.8.1.1.1.7 | ColumnrcDiInputState | read-only | current | Current digital input state read from hardware. |
| 1.3.6.1.4.1.15004.4.8.1.1.1.8 | ColumnrcDiAlarmStatus | read-only | current | Current alarm status for this digital input. Change of the value of this object will result in sending notification (trap) digitalInputTrap. |
| 1.3.6.1.4.1.15004.4.8.2 | NodercDigitalInputsConformance | |||
| 1.3.6.1.4.1.15004.4.8.2.2 | NodercDigitalInputsGroups | |||
| 1.3.6.1.4.1.15004.4.8.2.2.1 | GrouprcDigitalInputsTableGroup | current | Group objects related to Digital Alarms configuration and status. | |
| 1.3.6.1.4.1.15004.4.8.2.2.2 | GrouprcDigitalInputsNotifyGroup | current | A group of objects that define New Topology trap. | |
| 1.3.6.1.4.1.15004.5.18 | NotificationdigitalInputTrap | current | Indication that state of digital input changed to the state indicated by the value of object rcDiAlarmState. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EnabledStatus | INTEGER { enabled(1), disabled(2) } | current | A simple status value for the object. |
| RcActiveOrInactive | INTEGER { active(1), inactive(2) } | current | Activity status. |
| RcLowOrHigh | INTEGER { low(1), high(2) } | current | A state of signal. |