RUGGEDCOM-DOT11-MIB
71 objects
RuggedCom MIB for Managing Wireless Interface on RuggedCom Devices.
Imported Objects
| RUGGEDCOM-MIB | ruggedcomMgmt |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15004.4.4 | IdentityrcDot11 | RuggedCom MIB for Managing Wireless Interface on RuggedCom Devices. | ||
| 1.3.6.1.4.1.15004.4.4.1 | IdentityrcDot11GlobalParams | current | The main subtree for managing system wide parameters as applicable to wireless interface. | |
| 1.3.6.1.4.1.15004.4.4.1.1 | ScalarrcDot11OpMode | read-write | current | The Operational mode of wireless interface. |
| 1.3.6.1.4.1.15004.4.4.1.2 | ScalarrcDot11RFMAC | read-only | current | The MAC address assigned to the wireless interface side to operate in WLAN. Wired interface side is actually WLAN port of the switch and it is represented as a… |
| 1.3.6.1.4.1.15004.4.4.1.3 | ScalarrcDot11IpAddress | read-only | current | The IP Address assigned to the wireless interface. Note that wireless interface resides on a daughter card and is supported by separate IP stack. |
| 1.3.6.1.4.1.15004.4.4.1.4 | ScalarrcDot11IpSubnet | read-only | current | The subnet mask associated with rcDot11SysIpAddress. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.… |
| 1.3.6.1.4.1.15004.4.4.1.5 | ScalarrcDot11DefaultGateway | read-only | current | The default IP Gateway for the wireless interface. Note that wireless interface resides on a daughter card and is supported by separate IP stack. |
| 1.3.6.1.4.1.15004.4.4.1.6 | ScalarrcDot11Status | read-only | current | The current status of the wireless interface. |
| 1.3.6.1.4.1.15004.4.4.1.7 | ScalarrcDot11UpTime | read-only | current | The time since the daughter card was last re-initialized. |
| 1.3.6.1.4.1.15004.4.4.1.8 | ScalarrcDot11Version | read-only | current | The version of the WLAN firmware residing on the wireless daughter card. |
| 1.3.6.1.4.1.15004.4.4.1.9 | ScalarrcDot11TftpServerIpAddress | read-write | current | The IP address of the TFTP server where the WLAN firmware is located. Note that rcDot11IpAddress and rcDot11TftpServerIpAddress must be on the same IP subnet. |
| 1.3.6.1.4.1.15004.4.4.1.10 | ScalarrcDot11SwUpgrade | read-write | current | Setting the value of this object to 'true(1)' will start firmware upgrade procedure for the wireless daughter card. Note that this upgrade will take approximat… |
| 1.3.6.1.4.1.15004.4.4.1.11 | ScalarrcDot11SwUpgradeStatus | read-only | current | The Current status of the software upgrade process for the wireless daughter card. |
| 1.3.6.1.4.1.15004.4.4.1.12 | ScalarrcDot11WlanReset | read-write | current | The software controlled WLAN interface reset functionality. Setting the value of this object to 'fullReset(2)' will reset to both, the RF and Ethernet interfac… |
| 1.3.6.1.4.1.15004.4.4.2 | IdentityrcDot11NetworkParams | current | The main subtree for managing Wireless Network related parameteres of wireless interface. | |
| 1.3.6.1.4.1.15004.4.4.2.1 | ScalarrcDot11NetworkPhyMode | read-write | current | The wireless mode running on the wireless network. Setting the value of this object to 'auto(1)' will allow Access Point to select the wireless mode. Setting t… |
| 1.3.6.1.4.1.15004.4.4.2.2 | ScalarrcDot11NetworkDesiredSsid | read-write | current | The Service Set ID (SSID). This value is a unique name which is used to identify the wireless network for an Access Point(AP). |
| 1.3.6.1.4.1.15004.4.4.2.3 | ScalarrcDot11NetworkPrimarySsid | read-write | current | The Service Set ID (SSID). This value is a unique name which is used to identify the Primary Network for a ClientBridge or ClientIpBridge. Note that for wirele… |
| 1.3.6.1.4.1.15004.4.4.2.4 | ScalarrcDot11NetworkSecondary1Ssid | read-write | current | The Service Set ID (SSID). This value is a unique name which is used to identify the First secondary network (Secondary 1) for a ClientBridge or ClientIpBridge… |
| 1.3.6.1.4.1.15004.4.4.2.5 | ScalarrcDot11NetworkSecondary2Ssid | read-write | current | The Service Set ID (SSID). This value is a unique name which is used to identify the Second Secondary network (Secondary 2) for a ClientBridge or ClientIpBridg… |
| 1.3.6.1.4.1.15004.4.4.2.6 | ScalarrcDot11NetworkRfChannel | read-write | current | RF communication channel for the wireless interface. All devices in the same Basic Service Set ID (BSSID) must be communicating on the same channel in order to… |
| 1.3.6.1.4.1.15004.4.4.2.7 | ScalarrcDot11NetworkSsidTxSuppress | read-write | current | Setting the value of this object to 'true(1)' will suppress sending SSID information by Wireless Access Point(AP). Setting the value of this object to 'false(2… |
| 1.3.6.1.4.1.15004.4.4.2.8 | ScalarrcDot11NetworkRfTxEnable | read-write | current | Setting the value of this object to 'true(1)' enables the RF transmitter of wireless interface. Setting the value of this object to 'false(2)' disables the RF … |
| 1.3.6.1.4.1.15004.4.4.2.9 | ScalarrcDot11NetworkRate | read-write | current | Data link rate (in Mbps) of the wireless interface. 'best(1)' - Choose the best data link rate for the interface. 'mbps1(2)' - 1 Mbps 'mbps2(3)' - 2 Mbps 'mbps… |
| 1.3.6.1.4.1.15004.4.4.2.10 | ScalarrcDot11NetworkTxPower | read-write | current | Maximum RF transmission power of the wireless interface. |
| 1.3.6.1.4.1.15004.4.4.2.11 | ScalarrcDot11NetworkWdsEnable | read-write | current | The Wireless Distribution System (WDS) support. WDS is simply a mechanism for constructing 802.11 frames using the 4-address format. Setting the value of this … |
| 1.3.6.1.4.1.15004.4.4.2.12 | ScalarrcDot11NetworkWmmEnable | read-write | current | The Wireless Multimedia Support (WMM) is, actually QoS support for the wireless interface. Setting the value of this object to 'true(1)' enables the QoS suppor… |
| 1.3.6.1.4.1.15004.4.4.2.13 | ScalarrcDot11NetworkTxShortPreamble | read-write | current | Setting the value of this object to 'true(1)' allows sending short preamble block in the frames during wireless communication. Setting the value of this object… |
| 1.3.6.1.4.1.15004.4.4.2.14 | ScalarrcDot11NetworkDistance | read-write | current | The distance (in meters) between AP and the farthest station. It allows to optimize the wireless communication parameters, especially for running wireless link… |
| 1.3.6.1.4.1.15004.4.4.2.15 | ScalarrcDot11NetworkAssociatedStations | read-only | current | Number of connected station(s) in the wireless network. |
| 1.3.6.1.4.1.15004.4.4.3 | IdentityrcDot11SecurityParams | current | The main subtree for managing Security parameteres on wireless interface. | |
| 1.3.6.1.4.1.15004.4.4.3.1 | ScalarrcDot11SecurityAuthMode | read-write | current | Authentication mode to be used by the wireless interface in the network. 'none(1)' - No authentication. 'wep(2)' - WEP as an authentication algorithm 'dot1X(3)… |
| 1.3.6.1.4.1.15004.4.4.3.2 | ScalarrcDot11SecurityEncrypType | read-write | current | Encryption algorithm to be used, in conjunction with the rcDot11SecurityAuthMode object. Note that with rcDot11OpMode object value set to 'clientBridge(2)' onl… |
| 1.3.6.1.4.1.15004.4.4.3.3 | ScalarrcDot11SecurityPassPhrase | read-write | current | Security Pass Phrase to be used on the wireless network. |
| 1.3.6.1.4.1.15004.4.4.3.4 | ScalarrcDot11SecurityWepKey | read-write | current | WEP key for the wireless network presented as an octet string containing ASCII presentation of hexadecimal digits. This key is applicaple only when rcDot11Secu… |
| 1.3.6.1.4.1.15004.4.4.3.5 | ScalarrcDot11SecurityKeyRenewal | read-write | current | Time (in hundredths of second) within which group key for the wireless network should be changed. |
| 1.3.6.1.4.1.15004.4.4.3.6 | ScalarrcDot11SecurityRadiusIpAddress | read-write | current | The IP Address of RADIUS server used by wireless interface for 802.1x based authentication. |
| 1.3.6.1.4.1.15004.4.4.3.7 | ScalarrcDot11SecurityRadiusPort | read-write | current | The UDP port at which RADIUS server for the wireless interface is to be contacted. |
| 1.3.6.1.4.1.15004.4.4.3.8 | ScalarrcDot11SecurityRadiusSecret | read-write | current | The secret shared with the RADIUS server for 802.1x based authentication. |
| 1.3.6.1.4.1.15004.4.4.4 | IdentityrcDot11MacFiltering | current | The main subtree for managaing Mac Filtering options and entries for the wireless interface. | |
| 1.3.6.1.4.1.15004.4.4.4.1 | ScalarrcDot11MacFilteringControl | read-write | current | MAC filtering policy in place for WLAN. 'open(1)' - No MAC filtering is performed, any MAC address is allowed to connect from the network. 'allow(2)' - Only al… |
| 1.3.6.1.4.1.15004.4.4.4.2 | TablercDot11MacFilteringTable | not-accessible | current | This table provides ability to configure wireless LAN MAC filtering entries. MACs represented by entries in this table are controlled per description of the ob… |
| 1.3.6.1.4.1.15004.4.4.4.2.1 | RowrcDot11MacFilteringEntry | not-accessible | current | Each entry contains one MAC address. |
| 1.3.6.1.4.1.15004.4.4.4.2.1.1 | ColumnrcDot11FilterMacAddress | not-accessible | current | The MAC address from the network controled per description of the object rcDot11MacFilteringControl. |
| 1.3.6.1.4.1.15004.4.4.4.2.1.2 | ColumnrcDot11RowStatus | read-create | current | The status of this conceptual row. The syntax of this object represents restricted RowStatus functionality. |
| 1.3.6.1.4.1.15004.4.4.5 | IdentityrcDot11DhcpParams | current | The main subtree for managing DHCP client-server communication for wireless interfaces. | |
| 1.3.6.1.4.1.15004.4.4.5.1 | ScalarrcDot11DhcpServerEnable | read-write | current | Setting the value of this object to 'true(1)' enables the DHCP server functionality on wireless daughter card. Setting the value of this object to 'false(2)' d… |
| 1.3.6.1.4.1.15004.4.4.5.2 | ScalarrcDot11DhcpStartOfPool | read-write | current | Beginning of IP address pool in the DHCP server. |
| 1.3.6.1.4.1.15004.4.4.5.3 | ScalarrcDot11DhcpIpPoolSize | read-write | current | Size of IP address pool in the DHCP server. |
| 1.3.6.1.4.1.15004.4.4.5.4 | ScalarrcDot11DhcpSubnet | read-write | current | The subnet mask associated with the DHCP server. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. |
| 1.3.6.1.4.1.15004.4.4.5.5 | ScalarrcDot11DhcpGateway | read-write | current | The default gateway to be used by DHCP server. |
| 1.3.6.1.4.1.15004.4.4.5.6 | ScalarrcDot11DhcpDnsIpAddress | read-write | current | The IP address of DNS server in the DHCP server. |
| 1.3.6.1.4.1.15004.4.4.5.7 | ScalarrcDot11DhcpLeaseTime | read-write | current | Lease Time (in hundredths of second) to be used by DHCP server for the IpAddress assigned to other devices. Note that valid lease time varies between 6000 - 25… |
| 1.3.6.1.4.1.15004.4.4.6 | IdentityrcDot11AssociationInfo | current | The main subtree for managing information related to associated stations on the wireless interface. | |
| 1.3.6.1.4.1.15004.4.4.6.1 | TablercDot11AssociationTable | not-accessible | current | This table provides detailed information on wireless links with associated stations if rcDot11OpMode object value is set to 'ap(1)'. If rcDot11OpMode object va… |
| 1.3.6.1.4.1.15004.4.4.6.1.1 | RowrcDot11AssociationEntry | not-accessible | current | Each entry contains one MAC address with its associated network settings on a wireless link. |
| 1.3.6.1.4.1.15004.4.4.6.1.1.1 | ColumnrcDot11AssociationMac | not-accessible | current | The MAC address of associated station on a wireless link. |
| 1.3.6.1.4.1.15004.4.4.6.1.1.2 | ColumnrcDot11AssociationChannel | read-only | current | The association channel in use for this wireless link. |
| 1.3.6.1.4.1.15004.4.4.6.1.1.3 | ColumnrcDot11AssociationRate | read-only | current | The current data rate for this wireless link. |
| 1.3.6.1.4.1.15004.4.4.6.1.1.4 | ColumnrcDot11AssociationRssi | read-only | current | The RSSI(Received Signal Strength Indication) of the power present in a received RF signal for this wireless link. |
| 1.3.6.1.4.1.15004.4.4.6.1.1.5 | ColumnrcDot11AssociationTxSeq | read-only | current | The Transmitter sequence number for associated station on this wireless link. |
| 1.3.6.1.4.1.15004.4.4.6.1.1.6 | ColumnrcDot11AssociationRxSeq | read-only | current | The Receiver sequence number from the associated station on this wireless link. |
| 1.3.6.1.4.1.15004.4.4.6.1.1.7 | ColumnrcDot11AssociationSecurity | read-only | current | The Security policy in place for this wireless link. |
| 1.3.6.1.4.1.15004.4.4.10 | NodercDot11Conformance | |||
| 1.3.6.1.4.1.15004.4.4.10.2 | NodercDot11Groups | |||
| 1.3.6.1.4.1.15004.4.4.10.2.1 | GrouprcDot11GlobalParamsGroup | current | Objects related to global settings for wireless daughter card. | |
| 1.3.6.1.4.1.15004.4.4.10.2.2 | GrouprcDot11NetworkParamsGroup | current | Objects related to managing Network related settings on wireless daughter card. | |
| 1.3.6.1.4.1.15004.4.4.10.2.3 | GrouprcDot11SecurityParamsGroup | current | Objects related to managing Security attributes on wireless daughter card. | |
| 1.3.6.1.4.1.15004.4.4.10.2.4 | GrouprcDot11DhcpParamsGroup | current | Objects related to managing DHCP server on wirless daughter card. | |
| 1.3.6.1.4.1.15004.4.4.10.2.5 | GrouprcDot11MacFilteringTableGroup | current | This group includes objects related to Mac Filter control. | |
| 1.3.6.1.4.1.15004.4.4.10.2.6 | GrouprcDot11AssociationTableGroup | current | Objects related to associated station(s) on their respective wireless link. |