SALIX-DS1-MIB
17 objects
The MIB describing objects relating to DS1 interfaces, specifically items that augment objects from the DS1-MIB
Imported Objects
| ATM-FORUM-M4-MIB | atmfM4TrapAlarmSeverity |
| DS1-MIB | dsx1ConfigEntry |
| ENTITY-MIB | entPhysicalIndex |
| HOST-RESOURCES-MIB | DateAndTime |
| SALIX-MIB | salixGeneric |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2158.2.7 | IdentitysalixDsx1MIB | The MIB describing objects relating to DS1 interfaces, specifically items that augment objects from the DS1-MIB | ||
| 1.3.6.1.4.1.2158.2.7.1 | NodesalixDsx1MIBObjects | |||
| 1.3.6.1.4.1.2158.2.7.1.1 | TablesalixDsx1ConfigTable | not-accessible | current | The SALIX DS1 config table This table augments the dsx1ConfigTable defined in the DS1 MIB. |
| 1.3.6.1.4.1.2158.2.7.1.1.1 | RowsalixDsx1ConfigEntry | not-accessible | current | An entry in the SALIX DS1 config table. This entry containts SALIX specific DS1 configuration objects |
| 1.3.6.1.4.1.2158.2.7.1.1.1.1 | ColumnsalixDsx1ContinuityTestType | read-write | current | The type of continuity test that should be setup. An entry exists for every DS1 in the system. This object is consulted when IPDC is requested to setup a conti… |
| 1.3.6.1.4.1.2158.2.7.1.1.1.2 | ColumnsalixDsx1DChannelPresent | read-write | current | An indication of whether channel 24 of the DS1 is reserved for D channel signaling. |
| 1.3.6.1.4.1.2158.2.7.1.1.1.3 | ColumnsalixDsx1AutoInitiateState | read-write | current | An indication of whether the D channel data link control (layer 2) should be initiated automatically during DS1 initialization or brought up on demand. This at… |
| 1.3.6.1.4.1.2158.2.7.1.1.1.4 | ColumnsalixDsx1DChannelMode | read-write | current | An indication of whether the D Channel (if present) on the given DS1 should be configured as 'user mode' or as 'network mode'. This attributes is only used if … |
| 1.3.6.1.4.1.2158.2.7.1.1.1.5 | ColumnsalixDsx1RobbedBitSignalling | read-write | current | An indication of whether the 'ABCD' bits of the DS0s in the DS1 should be configured for robbed bit signalling. |
| 1.3.6.1.4.1.2158.2.7.1.1.1.7 | ColumnsalixDsx1TDMEchoCancellation | read-write | current | An indication of whether echo cancellation should be applied to the DS0s in the DS1. echoCancel16ms - 16 millisecond echo cancellation tail length echoCancel32… |
| 1.3.6.1.4.1.2158.2.7.2 | NodesalixDsx1MIBTraps | |||
| 1.3.6.1.4.1.2158.2.7.2.0 | NodesalixDsx1MIBTrapPrefix | |||
| 1.3.6.1.4.1.2158.2.7.3 | NodesalixDsx1MIBCompliance | |||
| 1.3.6.1.4.1.2158.2.7.3.1 | NodesalixDs1Groups | |||
| 1.3.6.1.4.1.2158.2.7.3.1.1 | GroupsalixDs1Group | current | Salix DS1 Objects Group | |
| 1.3.6.1.4.1.2158.2.7.3.2 | NodesalixDs1Compliances | |||
| 1.3.6.1.4.1.2158.2.7.3.2.1 | CompliancesalixDs1Compliance | current | The basic implementation requirements for the SALIX-DS1-MIB. |