MIB Viewer

SALIX-M4-MIB

31 objects
The MIB describing SALIX specific extensions to the M4-MIB
Imported Objects
ATM-FORUM-M4-MIBatmfM4CellProtoHistIndex atmfM4EquipHolderEntry atmfM4PlugInUnitEntry atmfM4TcAdaptorEntry atmfM4TrapAlarmSeverity
ENTITY-MIBentPhysicalIndex PhysicalIndex
HOST-RESOURCES-MIBhrSWInstalledIndex
SALIX-MIBsalixGeneric
SALIX-PRODUCT-PLUGIN-MIBSalixPlugInUnitType
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMIIpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCDisplayString RowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.2158.2.5IdentitysalixM4MIBThe MIB describing SALIX specific extensions to the M4-MIB
1.3.6.1.4.1.2158.2.5.0NodesalixM4MIBTrapPrefix
1.3.6.1.4.1.2158.2.5.0.1NotificationsalixAtmfM4HwSwDownloadSuccesscurrentIndicates that software was successfully downloaded to the physical entity identified by the entPhysicalIndex. For a successful download to a 'salixSysSwDownlo…
1.3.6.1.4.1.2158.2.5.0.2NotificationsalixAtmfM4PlugInUnitRedundancyPairCreatedcurrentIndicates that a 1:1 redundancy pair was created between two plug-in units. The salixAtmfM4PlugInUnitRedundancyConfig' objects identify the 'working' and 'prot…
1.3.6.1.4.1.2158.2.5.0.3NotificationsalixAtmfM4PlugInUnitRedundancyPairDestroyedcurrentIndicates that the 1:1 redundancy pair between the two plug-in units identified by the salixAtmfM4PlugInUnitRedundancyConfig objects was destroyed.
1.3.6.1.4.1.2158.2.5.0.4NotificationsalixAtmfM4PlugInUnitRedundancyPairSwitchovercurrentIndicates a switch from the working plug-in unit of the redundant pair to the protect partner plug-in unit. The 'salixAtmfM4PlugInUnitRedundancyConfig' objects…
1.3.6.1.4.1.2158.2.5.0.5NotificationsalixAtmfM4PlugInUnitRedundancyPairStatusChangecurrentIndicates a change in status of the redundant plug-in unit pair. The 'salixAtmfM4PlugInUnitRedundancyConfig' objects reflect the current redundancy configurati…
1.3.6.1.4.1.2158.2.5.1NodesalixM4MIBObjects
1.3.6.1.4.1.2158.2.5.1.2TablesalixAtmfM4EquipHolderTablenot-accessiblecurrentThe HNE equipment holder table. This table augments the atmfM4EquipHolderTable defined in the ATM-FORUM-M4-MIB.
1.3.6.1.4.1.2158.2.5.1.2.1RowsalixAtmfM4EquipHolderEntrynot-accessiblecurrentAn entry in the HNE equipment holder table. An entry contains HNE specific equipment holder information not found in the ATM-FORUM-M4-MIB.
1.3.6.1.4.1.2158.2.5.1.2.1.1ColumnsalixAtmfM4EquipHolderDownloadStateread-onlycurrentThe software download state of the plug-in unit contained in the equipment holder. This status is only valid if the equipment holder is a slot. If the equipmen…
1.3.6.1.4.1.2158.2.5.1.2.1.2ColumnsalixAtmfM4EquipHolderDownloadStatusMessageread-onlycurrentStatus message that describes the current state of the download as indicated by the 'salixAtmfM4EquipHolderDownloadState' attribute.
1.3.6.1.4.1.2158.2.5.1.3TablesalixAtmfM4PlugInUnitTablenot-accessiblecurrentThe HNE plug-in unit table. This table augments the atmfM4PlugInUnitTable defined in the ATM-FORUM-M4-MIB.
1.3.6.1.4.1.2158.2.5.1.3.1RowsalixAtmfM4PlugInUnitEntrynot-accessiblecurrentAn entry in the HNE plug-in unit table. An entry contains HNE specific plug-in information not found in the ATM-FORUM-M4-MIB.
1.3.6.1.4.1.2158.2.5.1.3.1.1ColumnsalixAtmfM4PlugInUnitSerialNumberread-onlycurrentThe serial number of the plug-in unit.
1.3.6.1.4.1.2158.2.5.1.3.1.2ColumnsalixAtmfM4PlugInUnitTyperead-onlycurrentThe type of plug-in unit loaded in the slot.
1.3.6.1.4.1.2158.2.5.1.3.1.3ColumnsalixAtmfM4PlugInUnitResetread-writecurrentThe type of reset to issue to the plug-in unit. The following types of plug-in units can be reset, 'mpu', 'dpu', 'smu', 'liu' and 'hsf'. Writing a cold(1) or w…
1.3.6.1.4.1.2158.2.5.1.3.1.4ColumnsalixAtmfM4PlugInUnitHwRevisionread-onlycurrentThe hardware revision of the plug-in unit.
1.3.6.1.4.1.2158.2.5.1.3.1.5ColumnsalixAtmfM4PlugInUnitLedStatusread-onlycurrentThe status of the LEDs on the plug-in unit. The various bit positions are: 1 OK LED is on 2 OK LED is flashing 4 Active LED is on 8 Active LED is flashing 16 F…
1.3.6.1.4.1.2158.2.5.1.3.1.6ColumnsalixAtmfM4PlugInUnitRedundancyConfigread-writecurrentWhen retrieved, this attribute represents the current redundancy configuration of the specified Plug-In Unit. A value of 'none' indicates that the specified Pl…
1.3.6.1.4.1.2158.2.5.1.3.1.7ColumnsalixAtmfM4PlugInUnitRedundancyPartnerModuleread-writecurrentWhen retrieved, this attributes represents the current partner module of a pair of plugins that are in redundancy relationship. This attribute is only valid wh…
1.3.6.1.4.1.2158.2.5.1.3.1.8ColumnsalixAtmfM4PlugInUnitRedundancyPairStatusread-onlycurrentThis attribute reflects the status of the redundant plug-in unit pair: none(1) - indicates that a 1:1 redundant pair does not exist with this plug-in unit. cre…
1.3.6.1.4.1.2158.2.5.1.3.1.9ColumnsalixAtmfM4PlugInUnitRedundancyStatusMessageread-onlycurrentStatus message that describes the current state of the redundant plug-in unit pair.
1.3.6.1.4.1.2158.2.5.1.4ScalarsalixAtmfM4TrapSwitchoverReasonaccessible-for-notifycurrentThis object identifies the reason for the switchover that occurred between two plug-in units in a redundant pair.
1.3.6.1.4.1.2158.2.5.2NodesalixM4MIBTraps
1.3.6.1.4.1.2158.2.5.3NodesalixM4MIBCompliance
1.3.6.1.4.1.2158.2.5.3.1NodesalixM4Groups
1.3.6.1.4.1.2158.2.5.3.1.1GroupsalixM4GroupcurrentSalix M4 Objects Group
1.3.6.1.4.1.2158.2.5.3.2NodesalixM4Compliances
1.3.6.1.4.1.2158.2.5.3.2.1CompliancesalixM4CompliancecurrentThe basic implementation requirements for the SALIX-M4-MIB.
Type Definitions
NameSyntaxStatusDescription
SalixAtmfM4SwitchoverReasonsINTEGER { administrative(1), pluginRemoved(2), failure(3) }currentDefinitions that identify reasons for a switchover to occur between two plug-in units in a redundancy pair.