SALIX-SYSTEM-MIB
40 objects
The MIB describing System Objects for SALIX products. These objects include error reporting objects, and other system information objects
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2158.2.3 | IdentitysalixSystemMIB | The MIB describing System Objects for SALIX products. These objects include error reporting objects, and other system information objects | ||
| 1.3.6.1.4.1.2158.2.3.1 | NodesalixSystemMIBObjects | |||
| 1.3.6.1.4.1.2158.2.3.1.1 | ScalarsalixSysLastLogErrorNumber | read-only | current | The error number that is associate with the last set request. |
| 1.3.6.1.4.1.2158.2.3.1.2 | ScalarsalixSysLastLogErrorMessage | read-only | current | The error message that describes the error associated with the last set request. |
| 1.3.6.1.4.1.2158.2.3.1.3 | ScalarsalixSysLastLogErrorOid | read-only | current | The last set request OID that produced an error. |
| 1.3.6.1.4.1.2158.2.3.1.4 | ScalarsalixSysTemperature | read-only | deprecated | The temperature in degrees Celsius inside the chassis. |
| 1.3.6.1.4.1.2158.2.3.1.5 | NodesalixSystemSync | |||
| 1.3.6.1.4.1.2158.2.3.1.5.1 | ScalarsalixSysSyncTimingMode | read-write | current | An identification of the source from which timing is derived by the working sync module. Possible values are: internal(1) - the internal oscillator on the sync… |
| 1.3.6.1.4.1.2158.2.3.1.5.2 | ScalarsalixSysSyncPrimaryRef | read-write | current | The interface index of the primary reference line from which the sync module can derive timing. If the 'salixSysSyncTimingMode' is set to 'line' then this inte… |
| 1.3.6.1.4.1.2158.2.3.1.5.3 | ScalarsalixSysSyncSecondaryRef | read-write | current | The interface index of the secondary reference line from which the sync module can derive timing. If the 'salixSysSyncTimingMode' is set to 'line' then this in… |
| 1.3.6.1.4.1.2158.2.3.1.5.4 | ScalarsalixSysSyncRevertiveSwitch | read-write | current | Indication of whether or not the active interface for deriving timing should revert to the interface defined by the primary reference line 'salixSysSyncPrimary… |
| 1.3.6.1.4.1.2158.2.3.1.5.5 | ScalarsalixSysSyncClockMode | read-only | current | Indication of the clock mode of the 'working' sync module. freeRun(1) - mode in which the clock is synchronized to the module's internal oscillator. normal(2) … |
| 1.3.6.1.4.1.2158.2.3.1.5.6 | ScalarsalixSysSyncConfiguredActiveRef | read-write | current | The configured active reference line from which the sync module should deriving its timing. This object is relevant if the 'salixSysSyncTimingMode' is set to '… |
| 1.3.6.1.4.1.2158.2.3.1.5.7 | ScalarsalixSysSyncAutoRefSwitch | read-write | current | Indication of automatic reference switching being enabled or disabled. true(1) - Auto reference switching is enabled false(2) - Auto reference switching is dis… |
| 1.3.6.1.4.1.2158.2.3.1.5.8 | ScalarsalixSysSyncFreeRunAlarm | read-write | current | Indication of alarm associated with free-run mode being enabled or disabled. true(1) - Alarm is enabled false(2) - Alarm is disabled |
| 1.3.6.1.4.1.2158.2.3.1.5.9 | ScalarsalixSysSyncWorking | read-write | current | The entPhysicalIndex of the sync module plug-in unit that is providing the system synchronizaton signal. Writing a new value to this object, a value not equal … |
| 1.3.6.1.4.1.2158.2.3.1.5.10 | ScalarsalixSysSyncProtect | read-only | current | The entPhysicalIndex of the sync module plug-in unit that is protecting or on standby to the working sync module. A value of 0 indicates that there is no redun… |
| 1.3.6.1.4.1.2158.2.3.1.5.11 | ScalarsalixSysSyncPrimaryRefState | read-only | current | This variable indicates the state of the primary reference line termination point to be used as a timing source by the sync module. This object is relevant if … |
| 1.3.6.1.4.1.2158.2.3.1.5.12 | ScalarsalixSysSyncSecondaryRefState | read-only | current | This variable indicates the state of the secondary reference line termination point to be used as a timing source by the sync module. This object is relevant i… |
| 1.3.6.1.4.1.2158.2.3.1.5.13 | ScalarsalixSysSyncCurrentActiveRef | read-only | current | Indication of the active reference line from which the sync module is deriving its timing. This object is relevant if the salixSysSyncTimingMode is set to 'lin… |
| 1.3.6.1.4.1.2158.2.3.1.5.14 | ScalarsalixSysSyncForcedState | read-only | current | This variable indicates the state of the sync module with regard to switching between the configured active reference, the value of the 'salixSysSyncConfigured… |
| 1.3.6.1.4.1.2158.2.3.1.6 | NodesalixSystemHsf | |||
| 1.3.6.1.4.1.2158.2.3.1.6.1 | ScalarsalixSysHsfWorking | read-write | current | The PhysicalIndex of the Hybrid Switch Fabric (HSF) module plug-in unit that is performing switching in the SALIX. Writing a new value to this variable will: -… |
| 1.3.6.1.4.1.2158.2.3.1.6.2 | ScalarsalixSysHsfProtect | read-only | current | The entPhysicalIndex of the Hybrid Switch Fabric (HSF) module plug-in unit that is protecting or on standby to the working HSF module, salixHSFWorking. A value… |
| 1.3.6.1.4.1.2158.2.3.1.7 | NodesalixSystemRsc | |||
| 1.3.6.1.4.1.2158.2.3.1.7.1 | ScalarsalixSysRscWorking | read-write | current | The PhysicalIndex of the Redundant Shelf Controller (RSC) module plug-in unit that is performing shelf controller operations in the product (ie. talking with m… |
| 1.3.6.1.4.1.2158.2.3.1.7.2 | ScalarsalixSysRscProtect | read-only | current | The entPhysicalIndex of the Redundant Shelf Controller (RSC) module plug-in unit that is protecting or on standby to the working RSC module, salixRscWorking. A… |
| 1.3.6.1.4.1.2158.2.3.1.8 | ScalarsalixSysLoginMessage | read-write | current | The message is displayed every time a user logs into the CLI. It may be used to display legal warnings. |
| 1.3.6.1.4.1.2158.2.3.2 | NodesalixSystemMIBTraps | |||
| 1.3.6.1.4.1.2158.2.3.2.0 | NodesalixSystemMIBTrapPrefix | |||
| 1.3.6.1.4.1.2158.2.3.2.0.1 | NotificationsalixSysSyncRefLineAlarm | current | Indicates that the Sync plug-in unit associated with the specified physical entity detected an error condition with the interface configured as a reference. Th… | |
| 1.3.6.1.4.1.2158.2.3.2.0.2 | NotificationsalixSysSyncInvalidRefLineAlarm | current | Indicates that the Sync plug-in unit associated with the specified physical entity does not have a valid primary or secondary reference line for deriving timin… | |
| 1.3.6.1.4.1.2158.2.3.2.0.3 | NotificationsalixSysSyncClockModeAlarm | current | Indicates that the clock mode of the working or protect Sync plug-in unit associated with the specified physical entity, 'atmfM4PlugInUnitAvailStatus', changed… | |
| 1.3.6.1.4.1.2158.2.3.2.0.4 | NotificationsalixSysSyncClockModeStateChange | current | Indicates that the clock mode of the working or protect Sync plug-in unit associated with the specified physical entity, 'atmfM4PlugInUnitAvailStatus', changed. | |
| 1.3.6.1.4.1.2158.2.3.2.0.5 | NotificationsalixSysFileSystemUnavailable | current | Indicates the System Filesystem is no longer available. This can indicate the loss of connectivity to the NFS server, or loss of the hard disk in systems with … | |
| 1.3.6.1.4.1.2158.2.3.3 | NodesalixSystemMIBCompliance | |||
| 1.3.6.1.4.1.2158.2.3.3.1 | NodesalixSystemGroups | |||
| 1.3.6.1.4.1.2158.2.3.3.1.1 | GroupsalixSystemGroup | current | Salix Error Objects Group | |
| 1.3.6.1.4.1.2158.2.3.3.2 | NodesalixSystemCompliances | |||
| 1.3.6.1.4.1.2158.2.3.3.2.1 | CompliancesalixSystemCompliance | current | The basic implementation requirements for the SALIX-ERROR-MIB. |