SATELCOM-MIB
437 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises NetworkAddress |
| RFC1213-MIB | DisplayString mib-2 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.397 | Nodesatelcom | |||
| 1.3.6.1.4.1.397.0 | NodeerrorLogReport | Enterprise Specific trap for MegaPAC. The Error Log entry in ascii format | ||
| 1.3.6.1.4.1.397.1 | Nodeproducts | |||
| 1.3.6.1.4.1.397.1 | NodesysRestart | Enterprise Specific trap for MegaPAC System restart. | ||
| 1.3.6.1.4.1.397.1.1 | NodemegaPAC-E-cpu-C | |||
| 1.3.6.1.4.1.397.1.2 | NodemegaPAC-N-series | |||
| 1.3.6.1.4.1.397.1.3 | NodemegaPAC-E-cpu-D | |||
| 1.3.6.1.4.1.397.1.4 | NodemegaCARD | |||
| 1.3.6.1.4.1.397.1.5 | Nodearm-Router | |||
| 1.3.6.1.4.1.397.1.6 | NodemegaPAC-V-cpu-8 | |||
| 1.3.6.1.4.1.397.1.7 | NodemegaPAC-V-cpu-16 | |||
| 1.3.6.1.4.1.397.1.8 | NodemegaPAC-V-cpu-68040 | |||
| 1.3.6.1.4.1.397.1.9 | NodemegaPAD | |||
| 1.3.6.1.4.1.397.1.10 | Nodemegapac-2001 | |||
| 1.3.6.1.4.1.397.1.11 | Nodemicropad-2 | |||
| 1.3.6.1.4.1.397.1.12 | Nodemicropad-4 | |||
| 1.3.6.1.4.1.397.1.13 | Nodemicropad-8 | |||
| 1.3.6.1.4.1.397.1.14 | Nodeduo-Card-MBOX | |||
| 1.3.6.1.4.1.397.1.15 | Nodeduo-Card-System | |||
| 1.3.6.1.4.1.397.1.16 | NodemegaBox-CPU-C | |||
| 1.3.6.1.4.1.397.1.17 | NodemegaBox-CPU-D | |||
| 1.3.6.1.4.1.397.1.18 | NodemegaBox-CPU-E | |||
| 1.3.6.1.4.1.397.1.19 | NodemegaPac-E-CPU-C-Dual | |||
| 1.3.6.1.4.1.397.1.20 | NodemegaPac-E-CPU-D-Dual | |||
| 1.3.6.1.4.1.397.1.21 | NodemegaPac-E-CPU-E-Dual | |||
| 1.3.6.1.4.1.397.1.22 | NodemegaPac-E-CPU-C-Dual-Fan | |||
| 1.3.6.1.4.1.397.1.23 | NodemegaPac-E-CPU-D-Dual-Fan | |||
| 1.3.6.1.4.1.397.1.24 | NodemegaPac-E-CPU-E-Dual-Fan | |||
| 1.3.6.1.4.1.397.1.25 | NodemegaPac-E-CPU-C-Dual-Fan-48V | |||
| 1.3.6.1.4.1.397.1.26 | NodemegaPac-E-CPU-D-Dual-Fan-48V | |||
| 1.3.6.1.4.1.397.1.27 | NodemegaPac-E-CPU-E-Dual-Fan-48V | |||
| 1.3.6.1.4.1.397.1.28 | NodemegaPAC-E-cpu-E | |||
| 1.3.6.1.4.1.397.1.29 | NodemegaPac-V-Dual-PSU | |||
| 1.3.6.1.4.1.397.1.30 | NodemegaPac-V-Dual-PSU-48V | |||
| 1.3.6.1.4.1.397.1.31 | Nodemegapac-20EM | |||
| 1.3.6.1.4.1.397.1.32 | Nodemegapac-21EM | |||
| 1.3.6.1.4.1.397.1.33 | Nodemegapac-2002 | |||
| 1.3.6.1.4.1.397.1.34 | Nodemegapac-2003 | |||
| 1.3.6.1.4.1.397.2 | Nodebase | |||
| 1.3.6.1.4.1.397.2.1 | ScalarbaseVersion | read-only | mandatory | Software Version. The software version currently running. Defined as YMMR (i.e. Year, Month, Revision |
| 1.3.6.1.4.1.397.2.2 | ScalarbaseRestartTime | read-only | mandatory | BASE Restart Time. The time and data of the last system restart (i.e. power-on or last BOOT) |
| 1.3.6.1.4.1.397.2.3 | ScalarbaseMaxPacketSize | read-only | mandatory | Node Maximum Packet Size. The maximum single buffer size available on the MegaPAC. |
| 1.3.6.1.4.1.397.2.4 | ScalarbaseBuffPoolMax | read-only | mandatory | Node Buffer Pool Maximum. The maximum number of buffers available temporary storage of transitting data. |
| 1.3.6.1.4.1.397.2.5 | ScalarbaseBuffPoolNow | read-only | mandatory | Node Current Buffer Pool. The current number of free buffers available temporary storage of transitting data. |
| 1.3.6.1.4.1.397.2.6 | ScalarbaseBufferPoolLowest | read-only | mandatory | Node Buffer Pool Lowest. The lowest value the buffer pool has ever reached. |
| 1.3.6.1.4.1.397.2.7 | ScalarbaseBufferPoolEmpty | read-only | mandatory | Node Buffer Pool Empty. The number of times that the free buffer pool has fallen below the minimum buffer threshold 'baseBuffThreshold'. |
| 1.3.6.1.4.1.397.2.8 | ScalarbaseStatBufferThreshold | read-only | mandatory | Node Buffer Threshold. When the number of buffers in the free buffer pool reaches this threshold, flow control will occur. |
| 1.3.6.1.4.1.397.2.9 | ScalarbaseMemorySize | read-only | mandatory | Node Memory Size. The size of the system memory installed in the MegaPAC. |
| 1.3.6.1.4.1.397.2.10 | ScalarbaseDataFramesIn | read-only | mandatory | Node Frames In. The total number of frames received by the MegaPAC. |
| 1.3.6.1.4.1.397.2.11 | ScalarbaseDataFramesOut | read-only | mandatory | Node Frames Out. The total number of frames transmitted by the MegaPAC. |
| 1.3.6.1.4.1.397.2.12 | ScalarbaseDataFrameRateIn | read-only | mandatory | Node Frame Rate In. The rate measured in frames per second that the MegaPAC is currently receiving frames. |
| 1.3.6.1.4.1.397.2.13 | ScalarbaseDataFrameRateOut | read-only | mandatory | Node Frames Rate Out. The rate measured in frames per second that the MegaPAC is currently transmitting frames. |
| 1.3.6.1.4.1.397.2.14 | ScalarbaseTotalCallSetUps | read-only | mandatory | Node Total Call Set ups. The total number of calls successfully established by the MegaPAC. |
| 1.3.6.1.4.1.397.2.15 | ScalarbaseCurrentCalls | read-only | mandatory | Current calls. The number of calls currently active on the MegaPAC. |
| 1.3.6.1.4.1.397.2.16 | ScalarbaseRetransmissions | read-only | mandatory | Node Retransmissions. The total number of frames which have been retransmitted by the MegaPAC. |
| 1.3.6.1.4.1.397.2.17 | ScalarbaseRejects | read-only | mandatory | Node Rejects. The total number of frames that have been rejected by the MegaPAC. |
| 1.3.6.1.4.1.397.2.18 | ScalarbaseTotalTransportCalls | read-only | mandatory | Node Total Transport calls. The total number of transport calls established by the MegaPAC. |
| 1.3.6.1.4.1.397.2.19 | ScalarbaseCurrentTransportCalls | read-only | mandatory | Current Transport Calls. The number of transport calls currently active on the MegaPAC. |
| 1.3.6.1.4.1.397.2.20 | ScalarbaseRunStatus | read-only | mandatory | Node Run Status. This parameter indicates whether the operating system has been 'Booted' from RAM (TELELOAD) or EPROM (default). |
| 1.3.6.1.4.1.397.2.21 | ScalarbaseReports | read-write | mandatory | Node Reporting channel. The name of the logical resource (channel) that the system reports will be directed to. |
| 1.3.6.1.4.1.397.2.22 | ScalarbaseSessionStatistics | read-write | mandatory | Node Session Statistics reporting channel. The name of the logical resource (channel) that the system session statistics will be directed to. |
| 1.3.6.1.4.1.397.2.23 | ScalarbaseBufferThreshold | read-write | mandatory | Node Buffer Threshold. The threshold before flow control is invoked |
| 1.3.6.1.4.1.397.2.24 | ScalarbaseInitialPresentationTimer | read-write | mandatory | Node Initial Presentation Timer. The maximum time allowed between initial connection to the presentation service and the user entering a valid resource. The ca… |
| 1.3.6.1.4.1.397.2.25 | ScalarbaseSecondaryPresentationTimer | read-write | mandatory | Node Secondary Presentation Timer. After a call has been cleared by the Host DTE the user has the option to use the presentation service to establish another c… |
| 1.3.6.1.4.1.397.2.26 | ScalarbaseInactivityDetectTimer | read-write | mandatory | Node Inactivity Timer. This timer will cause calls to be cleared if the IDLE option has been configured on the channel. |
| 1.3.6.1.4.1.397.2.27 | ScalarbaseSegmentAccounting | read-write | mandatory | Node Segment Accounting. This parameter causes the frames in/out parameters to be displayed in terms of 64 byte SEGMENTS rather than frames. |
| 1.3.6.1.4.1.397.2.28 | ScalarbaseTerminalEmulationBuffers | read-write | mandatory | Terminal Emulation Buffers. The number of system buffers allocated for Terminal Emulation purposes. |
| 1.3.6.1.4.1.397.2.29 | ScalarbaseTransportBuffers | read-write | mandatory | Transport Buffers. The number of transport buffers allocated for TP 0,2,3,4 sessions. |
| 1.3.6.1.4.1.397.2.30 | ScalarbaseCountrySettings | read-write | mandatory | Country Setting. Invokes the ASCII representation of the Japanese character set. |
| 1.3.6.1.4.1.397.2.31 | ScalarbaseTeleloadEnabled | read-write | mandatory | Teleload enable. If set to yes the MegaPAC software may be downloaded by ASCII file transfer. |
| 1.3.6.1.4.1.397.2.32 | ScalarbaseDefaultToPromCompatible | read-write | mandatory | Cold Boot From PROM. If set to yes the MegaPAC software may be downloaded by ASCII file transfer. |
| 1.3.6.1.4.1.397.2.33 | ScalarbaseCommand | read-write | mandatory | Allows SNMP manager to execute commands. |
| 1.3.6.1.4.1.397.2.34 | ScalarbaseCommandControllerIndex | read-write | mandatory | Sets controller index for baseCommands where relevant. |
| 1.3.6.1.4.1.397.2.35 | ScalarbaseCommandChannelndex | read-write | mandatory | Sets channel index for baseCommands where relevant. |
| 1.3.6.1.4.1.397.2.36 | ScalarbaseConnectedToProtocol | read-only | mandatory | Indicates the VCP state. NULL is VCP free; a returned value indicates BUSY and maps the access protocol. |
| 1.3.6.1.4.1.397.2.37 | ScalarbaseBillingThreshold | read-write | mandatory | Sets threshold for billing alarms - entry written to ELOG file, and trap sent. |
| 1.3.6.1.4.1.397.2.38 | ScalarbaseBillUnread | read-only | mandatory | Number of BILLING records outstanding - to be read by SNMP manager. |
| 1.3.6.1.4.1.397.2.39 | ScalarbaseCurrentBill | read-only | mandatory | Record number of current available BILLING record. |
| 1.3.6.1.4.1.397.2.40 | ScalarbaseBillRecordBuffer | read-only | mandatory | The current BILLING record data. |
| 1.3.6.1.4.1.397.2.41 | ScalarbaseCurrentConfig | read-only | mandatory | A decimal number from 0000 to 9999 representing the current configuration. |
| 1.3.6.1.4.1.397.2.44 | ScalarbaseCommandBuffer | read-write | mandatory | The VCP single line command string buffer. |
| 1.3.6.1.4.1.397.2.45 | ScalarbaseCommandLength | read-write | mandatory | The length in Hex of the single line command string. |
| 1.3.6.1.4.1.397.2.46 | ScalarbaseEMPresent | read-only | mandatory | Indicator of whether Environmental Monitor is present. |
| 1.3.6.1.4.1.397.2.47 | ScalarbaseEMTempTens | read-only | mandatory | Tens part of Environmental Monitor temperature. |
| 1.3.6.1.4.1.397.2.48 | ScalarbaseEMTempUnits | read-only | mandatory | Unit part of Environmental Monitor temperature. |
| 1.3.6.1.4.1.397.2.49 | ScalarbaseEMFan1 | read-only | mandatory | Environmental Monitor Fan 1 state. |
| 1.3.6.1.4.1.397.2.50 | ScalarbaseEMFan2 | read-only | mandatory | Environmental Monitor Fan 2 state. |
| 1.3.6.1.4.1.397.2.51 | ScalarbaseEMFan3 | read-only | mandatory | Environmental Monitor Fan 3 state. |
| 1.3.6.1.4.1.397.2.52 | ScalarbaseEMVoltage | read-only | mandatory | Environmental Monitor voltage. |
| 1.3.6.1.4.1.397.2.53 | ScalarbaseEMPsu1 | read-only | mandatory | Environmental Monitor PSU 1 state. |
| 1.3.6.1.4.1.397.2.54 | ScalarbaseEMPsu2 | read-only | mandatory | Environmental Monitor PSU 2 state. |
| 1.3.6.1.4.1.397.2.55 | ScalarbaseCPUUtil | read-only | mandatory | CPU utilisation in the range 0 to 100. |
| 1.3.6.1.4.1.397.3 | Nodecontroller | |||
| 1.3.6.1.4.1.397.3.1 | ScalarctrlNumberConfigured | read-only | mandatory | Total Number of Controllers Configured. The number of controllers in the MegaPAC which have been configured. |
| 1.3.6.1.4.1.397.3.2 | ScalarctrlTotalNumber | read-only | mandatory | Total Number of Controllers. The TOTAL number of controllers in the MegaPAC including unconfigured (NULL) controllers. |
| 1.3.6.1.4.1.397.3.3 | TablectrlStatTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.397.3.3.1 | RowctrlStatEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.397.3.3.1.1 | ColumnctrlStatIndex | read-only | mandatory | Controller index. The position of this controller in relation to 'BASE'. i.e. BASE = 0 NMSC = 1 PS01 = 2 ... |
| 1.3.6.1.4.1.397.3.3.1.2 | ColumnctrlStatName | read-only | mandatory | Controller name. The unique 4 character name by which this controller is known. |
| 1.3.6.1.4.1.397.3.3.1.3 | ColumnctrlStatType | read-only | mandatory | Controller Type. The type of software controller. |
| 1.3.6.1.4.1.397.3.3.1.4 | ColumnctrlStatSubType | read-only | mandatory | Sub Type. The serial I/O board installed. |
| 1.3.6.1.4.1.397.3.3.1.5 | ColumnctrlStatNumberChannels | read-only | mandatory | Channel Count. The number of channels assigned to a controller. |
| 1.3.6.1.4.1.397.3.3.1.6 | ColumnctrlStatFirstChannelIndex | read-only | mandatory | First Channnel. The 1st channel index number used by the controller : PPP, X.25, XFRM, NFRM VFRM, CONS, IP, TIP, IPX, TIPX, ESIS, DLC, LAN, TLAN, ILAN, XLAN SD… |
| 1.3.6.1.4.1.397.3.3.1.7 | ColumnctrlStatCRCErrors | read-only | mandatory | CRC Errors. The number of packets received for which the checksum was not valid. |
| 1.3.6.1.4.1.397.3.3.1.8 | ColumnctrlStatTotalCallSetUps | read-only | mandatory | Total Call Set ups. The total number of successful calls established on this link. |
| 1.3.6.1.4.1.397.3.3.1.9 | ColumnctrlStatCurrentCalls | read-only | mandatory | Current Calls. The number of calls currently active on this link. |
| 1.3.6.1.4.1.397.3.3.1.10 | ColumnctrlStatDataIn | read-only | mandatory | Data bytes In. |
| 1.3.6.1.4.1.397.3.3.1.11 | ColumnctrlStatDataOut | read-only | mandatory | Data Out. The total number of data bytes transmitted on this link. |
| 1.3.6.1.4.1.397.3.3.1.12 | ColumnctrlStatDataFramesIn | read-only | mandatory | Data Frames In. The total number of data frames received on this link. |
| 1.3.6.1.4.1.397.3.3.1.13 | ColumnctrlStatDataFramesOut | read-only | mandatory | Data Frames Out. The total number of data frames transmitted on this link. |
| 1.3.6.1.4.1.397.3.3.1.14 | ColumnctrlStatDataFrameRateIn | read-only | mandatory | Data Frame Rate In. The rate that frames are arriving on this link, specified in frames per second. |
| 1.3.6.1.4.1.397.3.3.1.15 | ColumnctrlStatDataFrameRateOut | read-only | mandatory | Data Frame Frate Out. The rate that frames are being transmitted on this link, specified in frames per second. |
| 1.3.6.1.4.1.397.3.3.1.16 | ColumnctrlStatCallsReceived | read-only | mandatory | Calls Received. The total number of incoming call requests seen on this link. |
| 1.3.6.1.4.1.397.3.3.1.17 | ColumnctrlStatCallsSent | read-only | mandatory | Calls Sent. The total number of call requests sent out on this link. |
| 1.3.6.1.4.1.397.3.3.1.18 | ColumnctrlStatClearsReceived | read-only | mandatory | Clears Received. The total number of call clear requests received on this link. |
| 1.3.6.1.4.1.397.3.3.1.19 | ColumnctrlStatRetransmissions | read-only | mandatory | Retransmissions. The number of packets that have been transmitted more than once on this link. |
| 1.3.6.1.4.1.397.3.3.1.20 | ColumnctrlStatRejects | read-only | mandatory | Rejects. The total number of packets which have been rejected on this link. |
| 1.3.6.1.4.1.397.3.3.1.21 | ColumnctrlStatState | read-only | mandatory | State. The level 2 data state of the link. |
| 1.3.6.1.4.1.397.3.3.1.22 | ColumnctrlStatSubState | read-only | mandatory | Sub State. The level 3 state of this link. |
| 1.3.6.1.4.1.397.3.3.1.23 | ColumnctrlStatNoTries | read-only | mandatory | Tries. The number of un-numbered control frames sent to try and establish the link. |
| 1.3.6.1.4.1.397.3.3.1.24 | ColumnctrlStatOptions | read-only | mandatory | Options The options currently configured for this link. Note, that the values returned by the MegaPAC may be additive values - representing combined combinatio… |
| 1.3.6.1.4.1.397.3.3.1.25 | ColumnctrlStatLCGN | read-only | mandatory | LCGN The logical channel group number for this link. |
| 1.3.6.1.4.1.397.3.3.1.26 | ColumnctrlStatResetsReceived | read-only | mandatory | Resets Received. The total number of reset packets received on this link. |
| 1.3.6.1.4.1.397.3.3.1.27 | ColumnctrlStatInterruptsReceived | read-only | mandatory | Interupts Received. The total number of interrupt packets received on this link. |
| 1.3.6.1.4.1.397.3.3.1.28 | ColumnctrlStatOuputQueueLength | read-only | mandatory | Output Queue Length. The number of packets queued for transmission on this link. |
| 1.3.6.1.4.1.397.3.3.1.29 | ColumnctrlStatStationAddress | read-only | mandatory | Local MAC Address The MAC Address of the MegaPAC. |
| 1.3.6.1.4.1.397.3.3.1.30 | ColumnctrlStatDestinationAddress | read-only | mandatory | Destination MAC Address. The MAC Address of the destination device. |
| 1.3.6.1.4.1.397.3.3.1.31 | ColumnctrlStatEIA | read-only | mandatory | EIA state. Displays the EIA signals currently on the link. |
| 1.3.6.1.4.1.397.3.3.1.32 | ColumnctrlStatSdlcOptions | read-only | mandatory | SDLC Options. A range of link level options used for establishing IBM connections. |
| 1.3.6.1.4.1.397.3.3.1.33 | ColumnctrlStatArpRequestRec | read-only | mandatory | ARP Requests Received. The number of ARP requests sent to the MegaPAC |
| 1.3.6.1.4.1.397.3.3.1.34 | ColumnctrlStatArpRequestSent | read-only | mandatory | ARP Requests Sent. The number of ARP requests processed to the local LAN by the MegaPAC |
| 1.3.6.1.4.1.397.3.3.1.35 | ColumnctrlStatArpResponsesRec | read-only | mandatory | ARP Respones Received. The number of ARP responses returned to the the MegaPAC |
| 1.3.6.1.4.1.397.3.3.1.36 | ColumnctrlStatTestType | read-write | mandatory | Allows SNMP manager to set V54 tests; local or remote or off. |
| 1.3.6.1.4.1.397.3.3.1.37 | ColumnctrlStatTestSet | read-write | mandatory | Allows SNMP manager to apply the local/remote V54 test selection. |
| 1.3.6.1.4.1.397.3.3.1.38 | ColumnctrlStatTest | read-write | mandatory | Allows SNMP manager to activate local/remote V54 test. |
| 1.3.6.1.4.1.397.3.3.1.39 | ColumnctrlStatLstate | read-write | mandatory | Allows SNMP manager to read Local Loop test result. |
| 1.3.6.1.4.1.397.3.3.1.40 | ColumnctrlStatRstate | read-write | mandatory | Allows SNMP manager to read Remote Loop test result. |
| 1.3.6.1.4.1.397.3.4 | TablectrlParamTable | not-accessible | mandatory | The controller configuration table. |
| 1.3.6.1.4.1.397.3.4.1 | RowctrlParamEntry | not-accessible | mandatory | An individual controller configuration. |
| 1.3.6.1.4.1.397.3.4.1.1 | ColumnctrlParamIndex | read-only | mandatory | Index The position of this controller in relation to 'BASE'. i.e. BASE = 0 NMSC = 1 PS01 = 2 ... |
| 1.3.6.1.4.1.397.3.4.1.2 | ColumnctrlParamName | read-write | mandatory | Name. The unique 4 character name by which this controller is known. |
| 1.3.6.1.4.1.397.3.4.1.3 | ColumnctrlParamType | read-write | mandatory | Type. The type of controller |
| 1.3.6.1.4.1.397.3.4.1.4 | ColumnctrlParamSubType | read-write | mandatory | Sub-Type. The link between the controller and its associated hardware type. |
| 1.3.6.1.4.1.397.3.4.1.5 | ColumnctrlParamNoChannels | read-write | mandatory | Number of channels. The number of logical channels configured on the controller. |
| 1.3.6.1.4.1.397.3.4.1.6 | ColumnctrlParamSpeed | read-write | mandatory | Speed. The clock speed of the interface. |
| 1.3.6.1.4.1.397.3.4.1.7 | ColumnctrlParamInterfaceType | read-write | mandatory | The serial interface type. Note, Only applicable to MegaCard. |
| 1.3.6.1.4.1.397.3.4.1.8 | ColumnctrlParamPacketSize | read-write | mandatory | Packet Size. The maximum packet size in bytes of outgoing packets, this parameter must be less than or equal to the 'BASE' statistic 'maxPacketSize'. |
| 1.3.6.1.4.1.397.3.4.1.9 | ColumnctrlParamV54Modem | read-write | mandatory | V54 Modem. Enable V54 loop back testing. Note this does not initiate loop back testing, the loop back is initiated by typing in the 'TEST' command. |
| 1.3.6.1.4.1.397.3.4.1.10 | ColumnctrlParamAddress | read-write | mandatory | Address. The logical address designation of the controller. |
| 1.3.6.1.4.1.397.3.4.1.11 | ColumnctrlParamOptions | read-write | mandatory | Options. A range of controller options, options may be specified individually or added together. |
| 1.3.6.1.4.1.397.3.4.1.12 | ColumnctrlParamInitFrame | read-write | mandatory | Initial Frame. |
| 1.3.6.1.4.1.397.3.4.1.13 | ColumnctrlParamT1 | read-write | mandatory | T1. Timer for retransmission of unacknowleged frames. Specified in 0.1 second units. |
| 1.3.6.1.4.1.397.3.4.1.14 | ColumnctrlParamTries | read-write | mandatory | Tries. The number of times a frame will be retransmitted before a link restart is initiated. |
| 1.3.6.1.4.1.397.3.4.1.15 | ColumnctrlParamKLevel2 | read-write | mandatory | KLevel 2. The level 2 window size. |
| 1.3.6.1.4.1.397.3.4.1.16 | ColumnctrlParamKLevel3 | read-write | mandatory | KLevel 3. The level 3 window size. |
| 1.3.6.1.4.1.397.3.4.1.17 | ColumnctrlParamLineGroup | read-write | mandatory | Line Group. The line group is used for load sharing. If two links have same (non-zero) line group then data may be shared between them. |
| 1.3.6.1.4.1.397.3.4.1.18 | ColumnctrlParamLCGN | read-write | mandatory | LCGN. The logical channel group number for this link. |
| 1.3.6.1.4.1.397.3.4.1.19 | ColumnctrlParamLCNOffset | read-write | mandatory | LCN Offset. This parameter is used in conjunction with the LCGN. It's purpose is to shift the channel range by the appropriate offset. |
| 1.3.6.1.4.1.397.3.4.1.20 | ColumnctrlParamAddressGroup | read-write | mandatory | Address Group. This parameter is used in conjunction with the address group field in the x25 file to provide different addressing domains. |
| 1.3.6.1.4.1.397.3.4.1.21 | ColumnctrlParamFrameSequence | read-write | mandatory | Frame Sequence. This parameter determines if normal or extended frame sequencing is supported. |
| 1.3.6.1.4.1.397.3.4.1.22 | ColumnctrlParamCallTimeOut | read-write | mandatory | Call Time Out. The time in seconds the MegaPAC will wait to receive a call accept packet before clearing the call. |
| 1.3.6.1.4.1.397.3.4.1.23 | ColumnctrlParamErrorThreshold | read-write | mandatory | Error Threshold. The number of CRC errors that will be accepted before generating an error report. |
| 1.3.6.1.4.1.397.3.4.1.24 | ColumnctrlParamLoopBarPriority | read-write | mandatory | Loop Bar Priority. Prevents calls from looping on the same controller. |
| 1.3.6.1.4.1.397.3.4.1.25 | ColumnctrlParamExtendedCallMgmt | read-write | mandatory | Extended Call Management. Invokes extended packet processing facilities via the MAC file. |
| 1.3.6.1.4.1.397.3.4.1.26 | ColumnctrlParamOptionalTimers | read-write | mandatory | Optional Timers. Optional level 3 timers for clearing calls when a clear confirmation has not been received after a clear request has been sent. T13 is used if… |
| 1.3.6.1.4.1.397.3.4.1.27 | ColumnctrlParamOptionalFlags | read-write | mandatory | Optional Flags. This parameter is used to insert extra flags between frames to slow down the rate of transmission. It will only take effect on controllers with… |
| 1.3.6.1.4.1.397.3.4.1.28 | ColumnctrlParamTransportLevelType | read-write | mandatory | Transport Level Type. Enable the ISO transport facility. |
| 1.3.6.1.4.1.397.3.4.1.29 | ColumnctrlParamTransportClass | read-write | mandatory | Transport Class. The type of transport class implemented. |
| 1.3.6.1.4.1.397.3.4.1.30 | ColumnctrlParamDefaultWindowSize | read-write | mandatory | Default Window Size. The initial credit limit to be used on a transport session. |
| 1.3.6.1.4.1.397.3.4.1.31 | ColumnctrlParamDisableFlowControl | read-write | mandatory | Disable Flow Control. Enable/disable flow control on a tranport class 2 call. |
| 1.3.6.1.4.1.397.3.4.1.32 | ColumnctrlParamTSAPFormat | read-write | mandatory | TSAP Format. Determines how the TSAP's will be treated internally by the MegaPAC. If set to text the local and remote TSAP's will be converted to form a 4 char… |
| 1.3.6.1.4.1.397.3.4.1.33 | ColumnctrlParamMaximumTPDUSize | read-write | mandatory | Max. TPDU Size. The maximum Transport Protocol Data Unit Size. |
| 1.3.6.1.4.1.397.3.4.1.34 | ColumnctrlParamTTRTime | read-write | mandatory | TTR Timer. Time To Resynchronise. Specifies the time delay in seconds for the transport class three timer to resync at the initiating end. |
| 1.3.6.1.4.1.397.3.4.1.35 | ColumnctrlParamTWRTime | read-write | mandatory | TWR Timer. Time to Wait for Resynchronisation. The time delay in seconds allowed for the transport class 3 timer at the responding end to wait for resynchronis… |
| 1.3.6.1.4.1.397.3.4.1.36 | ColumnctrlParamDestinationAddress | read-write | mandatory | Destination Address. The physical address of the target device. |
| 1.3.6.1.4.1.397.3.4.1.37 | ColumnctrlParamDSAP | read-write | mandatory | DSAP. The Destination Service Access Point. |
| 1.3.6.1.4.1.397.3.4.1.38 | ColumnctrlParamSSAP | read-write | mandatory | SSAP. The Source Service Access Point. |
| 1.3.6.1.4.1.397.3.4.1.39 | ColumnctrlParamSDLCOptions | read-write | mandatory | SDLC Options. A range of link level options used for establishing IBM connections. |
| 1.3.6.1.4.1.397.3.4.1.40 | ColumnctrlParamPrimaryStation | read-write | mandatory | Primary Station. This parameter determines whether the MegaPAC will operate as a HOST primary connection (yes) or a CLUSTER secondary connection (no). |
| 1.3.6.1.4.1.397.3.4.1.41 | ColumnctrlParamIdleDetectTime | read-write | mandatory | Idle Detect Timer. This parameter determines the time period in tenths of a second before an unacknowleged POLL/RESPONSE frame will be retransmitted. |
| 1.3.6.1.4.1.397.3.4.1.42 | ColumnctrlParamPollInterval | read-write | mandatory | Poll Interval. The time period in tenths of a second between sending POLL frames. |
| 1.3.6.1.4.1.397.3.4.1.43 | ColumnctrlParamDuplex | read-write | mandatory | Duplex. Enables SDLC full duplex operation, half duplex operation is reserved for future use. |
| 1.3.6.1.4.1.397.3.4.1.44 | ColumnctrlParamTransmitDelay | read-write | mandatory | Transmit Delay. Determines the time period in tenths of a second between the MegaPAC receiving an RR frame with the P-Bit set and the MegaPAC issuing an RR res… |
| 1.3.6.1.4.1.397.3.4.1.45 | ColumnctrlParamSlowPollTimer | read-write | mandatory | Slow Poll Timer. When the controller has been defined as a primary station a slow poll rate can be specified for polling a Cluster controller that is down. Thi… |
| 1.3.6.1.4.1.397.3.4.1.46 | ColumnctrlParamMaxCallInterval | read-write | mandatory | Max. Call Interval. When controller is configured as a primary station, a call request retry interval may be defined, so as to avoid the situation where succes… |
| 1.3.6.1.4.1.397.3.4.1.47 | ColumnctrlParamMaxCallCycles | read-write | mandatory | Max. Call Cycles. This parameter is used in conjunction with the Maximum Call Interval parameter. It specifies the maximum number of call request cycles that c… |
| 1.3.6.1.4.1.397.3.4.1.48 | ColumnctrlParamGroupPoll | read-write | mandatory | Group Poll. Used in SNA applications, where the specified value would generate multiple down-stream poll requests. |
| 1.3.6.1.4.1.397.3.4.1.49 | ColumnctrlParamDelayToRTSLow | read-write | mandatory | Delay RTS Low. Specifies the number of padding characters to be inserted between the end of data transmission and the dropping of the RTS signal. Only required… |
| 1.3.6.1.4.1.397.3.4.1.50 | ColumnctrlParamDelayToCTSHigh | read-write | mandatory | Delay CTS High. Specifies the number of padding characters to be inserted between the dropping of RTS and the raising of CTS. Only required for synchronous ope… |
| 1.3.6.1.4.1.397.3.4.1.51 | ColumnctrlParamInputSyncDeletion | read-write | mandatory | Input Sync Deletion. If set, all SYNC characters will be stripped prior to transmission. Only effective in synchronous full duplex mode. |
| 1.3.6.1.4.1.397.3.4.1.52 | ColumnctrlParamOutputSyncInsertion | read-write | mandatory | Output Sync Insertion. Specifies the number of SYNC characters to be transmitted prior to the start of the data block. Only effective in synchronous operation. |
| 1.3.6.1.4.1.397.3.4.1.53 | ColumnctrlParamDCDFilter | read-write | mandatory | DCD Filter. A filter delay specified in tenths of a second which prevents unwanted link restarts caused by toggling of DCD signal. |
| 1.3.6.1.4.1.397.3.4.1.54 | ColumnctrlParamInhibitTimeFill | read-write | mandatory | Inhibit Time Fill Allows the insertion of time fill frames to compensate for network delays. Effective in synchronous mode only. |
| 1.3.6.1.4.1.397.3.4.1.55 | ColumnctrlParamDirectedBroadcasts | read-write | mandatory | Directed Broadcasts. |
| 1.3.6.1.4.1.397.3.4.1.56 | ColumnctrlParamDefaultLocalPrinter | read-write | mandatory | Default Local Printer. The number of the channel which is reserved for a Screen Print server, a value of (0) disables the Screen Print facility. |
| 1.3.6.1.4.1.397.3.4.1.57 | ColumnctrlParamNewLANInterface | read-write | mandatory | New FRM Port. This controller marks the first position of a controller connection to a LAN interface. All other controllers defined as NewPhysicalInterface/ No… |
| 1.3.6.1.4.1.397.3.4.1.58 | ColumnctrlParamNewSerialInterface | read-write | mandatory | New FRM Port. This controller marks the first position of a controller connection to a serial interface. All other controllers defined as NewPhysicalInterface/… |
| 1.3.6.1.4.1.397.3.4.1.59 | ColumnctrlParamDlci | read-write | mandatory | Defines the DLCI PVC number |
| 1.3.6.1.4.1.397.3.4.1.60 | ColumnctrlParamMode | read-write | mandatory | Defines a Network to Network Inteface (NNI) or User Network Interface (UNI) implementation. Where MegaPAC connects to a Frame Realy switch, this parameter just… |
| 1.3.6.1.4.1.397.3.4.1.61 | ColumnctrlParamLmi | read-write | mandatory | Local Management Inteface (LMI). Ansi = ANSI LMI yes = T1.S1 LMI no = LMI disabled. |
| 1.3.6.1.4.1.397.3.4.1.62 | ColumnctrlParamKeepAliveTimer | read-write | mandatory | Only applicable if the LMI is active. Specifies in seconds the interval between keep alive messages. If this end is a DTE, this is the actual interval between … |
| 1.3.6.1.4.1.397.3.4.1.63 | ColumnctrlParamStatusEnquiryInterval | read-write | mandatory | Frame Relay : Specifies how often a DTE sends a or a DCE expects a Full Status Request message. The number specified is the ratio between Status Requets messag… |
| 1.3.6.1.4.1.397.3.4.1.64 | ColumnctrlParamBandwidth | read-write | mandatory | The sample period used in enforcing the committed information rate (CIR). The CIR expressed in terms of characters per 1/10 th second. There are two further pa… |
| 1.3.6.1.4.1.397.3.4.1.65 | ColumnctrlParamBurstCommit | read-write | mandatory | Burst Commit, i.e. the number of characters the remote end is committed to buffering, in our case in a 1/10th of a second period |
| 1.3.6.1.4.1.397.3.4.1.66 | ColumnctrlParamBurstEligibility | read-write | mandatory | Burst Eligibility, i.e the DLCI in question is enabled to transmit a burst beyond its committed information rate, when enabled to do so by the state of the oth… |
| 1.3.6.1.4.1.397.4 | Nodechannel | |||
| 1.3.6.1.4.1.397.4.1 | ScalarchanNumberConfigured | read-only | mandatory | Number of channels. The number of channels configured. |
| 1.3.6.1.4.1.397.4.2 | TablechanStatTable | not-accessible | mandatory | A table of channels associated with a controller. |
| 1.3.6.1.4.1.397.4.2.1 | RowchanStatEntry | not-accessible | mandatory | An individual channel entry. |
| 1.3.6.1.4.1.397.4.2.1.1 | ColumnchanStatIndex | read-only | mandatory | Index. The position of this channel in the controller channel Table. |
| 1.3.6.1.4.1.397.4.2.1.2 | ColumnchanStatName | read-only | mandatory | Name. A user defined name for routing calls to this channel. |
| 1.3.6.1.4.1.397.4.2.1.3 | ColumnchanStatControllerIndex | read-only | mandatory | Controller Index. The index to the controller that this channel operates within. |
| 1.3.6.1.4.1.397.4.2.1.4 | ColumnchanStatNameCtrlName | read-only | mandatory | Controller Name. The controller NAME supporting this channel |
| 1.3.6.1.4.1.397.4.2.1.5 | ColumnchanStatConnectedToChannelIndex | read-only | mandatory | Connected to Index. The INDEX of the CHANNEL that this channel is connected to. |
| 1.3.6.1.4.1.397.4.2.1.6 | ColumnchanStatState | read-only | mandatory | State. The current Status of the channel, the status may be one or a combination of the following: disc Disconnected. emul Channel in Terminal Emulation mode. … |
| 1.3.6.1.4.1.397.4.2.1.7 | ColumnchanStatSessionStatus | read-only | mandatory | Session Status. The Status of the channel during a call session, the status may be one or a combination of the following: State Description CALL Call Originato… |
| 1.3.6.1.4.1.397.4.2.1.8 | ColumnchanStatEIA | read-only | mandatory | EIA Displays the status of the V24/V28 signals on term or muxport links, or call status on X.25 links. The down state indicates that level 2 is inactive. |
| 1.3.6.1.4.1.397.4.2.1.9 | ColumnchanStatTotalFramesIn | read-only | mandatory | Total Frames In. The total number of frames received on this channel since it entered Data State. |
| 1.3.6.1.4.1.397.4.2.1.10 | ColumnchanStatTotalFramesOut | read-only | mandatory | Total Frames out. The total number of frames transmitted on this channel since it entered Data State. |
| 1.3.6.1.4.1.397.4.2.1.11 | ColumnchanStatTotalCharsIn | read-only | mandatory | Total Characters In. The total number of characters received on this channel since it entered Data State. |
| 1.3.6.1.4.1.397.4.2.1.12 | ColumnchanStatTotalCharsOut | read-only | mandatory | Total Characters Out. The total number of characters transmitted on this channel since it entered Data State. |
| 1.3.6.1.4.1.397.4.2.1.13 | ColumnchanStatTxWindow | read-only | mandatory | Tx Window. The Level 3 Transmit Window size. |
| 1.3.6.1.4.1.397.4.2.1.14 | ColumnchanStatRxWindow | read-only | mandatory | Rx Window. The Level 3 Receive Window size. |
| 1.3.6.1.4.1.397.4.2.1.15 | ColumnchanStatTxSize | read-only | mandatory | Tx Size. The maximum size for outgoing packets. |
| 1.3.6.1.4.1.397.4.2.1.16 | ColumnchanStatRxSize | read-only | mandatory | Rx Size. The maximum acceptable size for incoming packets. |
| 1.3.6.1.4.1.397.4.2.1.17 | ColumnchanStatCause | read-only | mandatory | Cause. The value of the cause code in the last Clear Packet received or transmitted (decimal). |
| 1.3.6.1.4.1.397.4.2.1.18 | ColumnchanStatDiagnostic | read-only | mandatory | Diagnostic. The value of the diagnostic code in the last Clear Packet received or transmitted (decimal). |
| 1.3.6.1.4.1.397.4.2.1.19 | ColumnchanStatResetCause | read-only | mandatory | Reset Cause. The value of the last reset code in the last RESET packet transmitted. |
| 1.3.6.1.4.1.397.4.2.1.20 | ColumnchanStatResetDiagnostic | read-only | mandatory | Reset Diagnostic. The value of the last diagnostic code in the last RESET packet transmitted. |
| 1.3.6.1.4.1.397.4.2.1.21 | ColumnchanStatResetCauseReceived | read-only | mandatory | Reset Cause Received. The value of the last reset code in the last RESET packet received. |
| 1.3.6.1.4.1.397.4.2.1.22 | ColumnchanStatResetDiagReceived | read-only | mandatory | Reset Diagnostic Received. The value of the last diagnostic code in the last RESET packet received. |
| 1.3.6.1.4.1.397.4.2.1.23 | ColumnchanStatLevel3State | read-only | mandatory | Level 3 State. The level 3 status of the channel. |
| 1.3.6.1.4.1.397.4.2.1.24 | ColumnchanStatCallPriority | read-only | mandatory | Call Priority. Call and Resource priorities are used primarily for providing alternate routing. For a call to succeed the Call Priority on the incoming channel… |
| 1.3.6.1.4.1.397.4.2.1.25 | ColumnchanStatResourcePriority | read-only | mandatory | Resource Priority See chanCallPriority above. |
| 1.3.6.1.4.1.397.4.2.1.26 | ColumnchanStatPadEnable | read-only | mandatory | PAD Enable. The value of this statistic reflects the setting as configured on the channel. |
| 1.3.6.1.4.1.397.4.2.1.27 | ColumnchanStatPortMatch | read-only | mandatory | Port Match. The TCP port that is connected |
| 1.3.6.1.4.1.397.4.2.1.28 | ColumnchanStatPrimaryStation | read-only | mandatory | Primary Station. Determines whether the MegaPAC port is functioning as a Primary or Secondary SDLC station. |
| 1.3.6.1.4.1.397.4.2.1.29 | ColumnchanStatSDLCState | read-only | mandatory | SDLC State. The State of the SDLC connection, may be one of the following: State Description ACTIVE The SNRM and UA commands have been sent successfully. If pr… |
| 1.3.6.1.4.1.397.4.2.1.30 | ColumnchanStatQLLCState | read-only | mandatory | QLLC State. The State of the QLLC connection, may be one of the following: State Description CLSD The MegaPAC has received a QDISC and sent a QUA on the networ… |
| 1.3.6.1.4.1.397.4.2.1.31 | ColumnchanStatSDLCTransmitState | read-only | mandatory | SDLC Transmit State. May be one of the following: State Description NORM The MegaPAC is allowed to transmit data. NULL The MegaPAC is not allowed to transmit d… |
| 1.3.6.1.4.1.397.4.2.1.32 | ColumnchanStatPolls | read-only | mandatory | Polls. The quantity of polls that have occured since the link was established |
| 1.3.6.1.4.1.397.4.2.1.33 | ColumnchanStatStationAddress | read-only | mandatory | Station Address. The IBM PU poll address |
| 1.3.6.1.4.1.397.4.2.1.34 | ColumnchanStatXIDIdentification | read-only | mandatory | XID Identification. This field contains the first 64 bytes of the XID that has been used. |
| 1.3.6.1.4.1.397.4.2.1.35 | ColumnchanStatTries | read-only | mandatory | Tries. The number of times the current command has been transmitted. |
| 1.3.6.1.4.1.397.4.2.1.36 | ColumnchanStatWindow | read-only | mandatory | KLevel 2. The level 2 window size. |
| 1.3.6.1.4.1.397.4.2.1.37 | ColumnchanStatLUActive | read-only | mandatory | LU Active. If set to YES then the MegaPAC Logical Unit has responded positively to an ACTLU command. If set to NO the MegaPAC has either not received or has re… |
| 1.3.6.1.4.1.397.4.2.1.38 | ColumnchanStatBindActive | read-only | mandatory | Bind Active. If set to YES then the MegaPAC Logical Unit has responded positively to a BIND command. If set to NO the MegaPAC has either not received or has re… |
| 1.3.6.1.4.1.397.4.2.1.39 | ColumnchanStatLUType | read-only | mandatory | LU Type. The Session type taken from the BIND command. It may be one of the following: Session Type Description 0 User defined applications. 1 Printer. 2 Full … |
| 1.3.6.1.4.1.397.4.2.1.40 | ColumnchanStatBreaksReceived | read-only | mandatory | Breaks Rx The number of Break characters received from the terminal. |
| 1.3.6.1.4.1.397.4.2.1.41 | ColumnchanStatFramingErrors | read-only | mandatory | Framing Errors. The number of characters received with no stop bit appended. The MegaPAC substitutes a '#' character in place of each framing error. |
| 1.3.6.1.4.1.397.4.2.1.42 | ColumnchanStatInputOverruns | read-only | mandatory | Input Overruns. The number of times that data has been discarded due to a lack of receive buffers. |
| 1.3.6.1.4.1.397.4.2.1.43 | ColumnchanStatParityErrors | read-only | mandatory | TParity Errors. he number of parity errors received on this channel. |
| 1.3.6.1.4.1.397.4.2.1.44 | ColumnchanStatTerminalType | read-only | mandatory | Terminal Type. The type of emulation to be applied to the TERM controller, it may be one or more of the following: Type comment ASYN ASCII data support SYNC Bi… |
| 1.3.6.1.4.1.397.4.2.1.45 | ColumnchanStatCircuitType | read-only | mandatory | Circuit Type. The type of circuit used on this channel, it may be one or more of the following: |
| 1.3.6.1.4.1.397.4.2.1.46 | ColumnchanStatOptions | read-only | mandatory | The option(s) which have been envoked on this channel, one or more of: |
| 1.3.6.1.4.1.397.4.2.1.47 | ColumnchanStatBuffers | read-only | mandatory | Buffers. The number of data buffers to be used as a threshold value before flow control to the terminal is invoked. |
| 1.3.6.1.4.1.397.4.2.1.48 | ColumnchanStatDiscMode | read-only | mandatory | Disc mode. Specifies the call disconnect character that may be applied having established a route via the presentation service. |
| 1.3.6.1.4.1.397.4.2.1.49 | ColumnchanStatMenuNumber | read-only | mandatory | Menu Number. Specifies which menu will be displayed to the user by the presentation service. |
| 1.3.6.1.4.1.397.4.2.1.50 | ColumnchanStatHelpNumber | read-only | mandatory | Help Number. Specifies which help menu will be displayed to the user by the presentation service. |
| 1.3.6.1.4.1.397.4.2.1.51 | ColumnchanStatNewsNumber | read-only | mandatory | News Number. The Menu number that will be displayed if an outgoing resource is unavailable. |
| 1.3.6.1.4.1.397.4.2.1.52 | ColumnchanStatPadRecall | read-only | mandatory | Pad Recall. This parameter allows the user to escape from the data transfer state to the PAD command state. The permitted values are: 0 No PAD recall 1 Escape … |
| 1.3.6.1.4.1.397.4.2.1.53 | ColumnchanStatEcho | read-only | mandatory | Echo. Determines whether 'echo' is enabled or disabled. If set to controlled, the echo facility is controlled by the operator. |
| 1.3.6.1.4.1.397.4.2.1.54 | ColumnchanStatDataForwarding | read-only | mandatory | Data Forwarding. This parameter controls which character or characters cause the accumulated data to be forwarded. The possible values may be added together to… |
| 1.3.6.1.4.1.397.4.2.1.55 | ColumnchanStatDelay | read-only | mandatory | Delay. Specifies the idle time in tenths of a second, allowable between successive characters before the accumulated data is forwarded. A value of 0 disables t… |
| 1.3.6.1.4.1.397.4.2.1.56 | ColumnchanStatDRI | read-only | mandatory | DRI. Flow control of terminal by the MegaPAC. Valid settings are: enabled MegaPAC flow controls terminal using XON/XOFF. cts MegaPAC flow controls terminal usi… |
| 1.3.6.1.4.1.397.4.2.1.57 | ColumnchanStatPadSignals | read-only | mandatory | Pad Signals. Enable X.28 prompts and/or messages to be displayed on the users terminal. |
| 1.3.6.1.4.1.397.4.2.1.58 | ColumnchanStatBreak | read-only | mandatory | Break. The Action the MegaPAC will take on receipt of a Break Signal. The valid values are: 0 When the MegaPAC receives a Break Signal from the terminal no act… |
| 1.3.6.1.4.1.397.4.2.1.59 | ColumnchanStatPadding | read-only | mandatory | Padding. The number of NULL characters inserted after a carriage return. |
| 1.3.6.1.4.1.397.4.2.1.60 | ColumnchanStatFold | read-only | mandatory | Fold The number of characters output before line folding occurs. Setting to 0 disables line folding. |
| 1.3.6.1.4.1.397.4.2.1.61 | ColumnchanStatDRO | read-only | mandatory | Data Restraint Out. |
| 1.3.6.1.4.1.397.4.2.1.62 | ColumnchanStatLFI | read-only | mandatory | LFI. This parameter controls linefeed insertion after a carriage return. The valid seetings are: 0 Line feed insertion disabled. 1 A linefeed is inserted after… |
| 1.3.6.1.4.1.397.4.2.1.63 | ColumnchanStatLFPad | read-only | mandatory | LFPad. The number of NULL padding characters sent to a device following a linefeed character. |
| 1.3.6.1.4.1.397.4.2.1.64 | ColumnchanStatEdit | read-only | mandatory | Edit. Controls editing of text in data transfer state. |
| 1.3.6.1.4.1.397.4.2.1.65 | ColumnchanStatCharDel | read-only | mandatory | Char Del. The keystroke used for deleting a character. |
| 1.3.6.1.4.1.397.4.2.1.66 | ColumnchanStatBufferDel | read-only | mandatory | Buffer Del. The keystroke used for deleting the buffer. |
| 1.3.6.1.4.1.397.4.2.1.67 | ColumnchanStatDisp | read-only | mandatory | Disp The keystroke used to redisplay the data in the buffer. |
| 1.3.6.1.4.1.397.4.2.1.68 | ColumnchanStatEditServiceSignals | read-only | mandatory | Edit Service Signals. This parameter enables the user to edit the PAD service signals (echoing). The valid settings are: 0 No editing PAD service signals are e… |
| 1.3.6.1.4.1.397.4.2.1.69 | ColumnchanStatEchoMask | read-only | mandatory | Echo Mask. This parameter controls the characters which should not be echoed. The valid settings are: 0 All characters should be echoed to the terminal. 1 do n… |
| 1.3.6.1.4.1.397.4.2.1.70 | ColumnchanStatParityTreatment | read-only | mandatory | Parity Treatment. Determines the parity generation and checking performed valid settings are: 0 No parity generation or checking. 1 Check parity. 2 Generate pa… |
| 1.3.6.1.4.1.397.4.2.1.71 | ColumnchanStatPageWait | read-only | mandatory | PageWait. Specifies the number of lines to be transmitted, after which the MegaPAC will wait until instructed by the user to continue sending data (by entering… |
| 1.3.6.1.4.1.397.4.2.1.72 | ColumnchanStatForce | read-only | mandatory | Forward Char. The ASCII character which will force data forwarding, 0 disables forced data forwarding. |
| 1.3.6.1.4.1.397.4.2.1.73 | ColumnchanStatBreakChar | read-only | mandatory | Break Char. The ASCII character in decimal which is used to simulate a BREAK signal. |
| 1.3.6.1.4.1.397.4.2.1.74 | ColumnchanStatNetworkParity | read-only | mandatory | Network Parity. With the Terminal type set to ASYN+X28, the parity can be forced onto the network side by selecting the approriate value. |
| 1.3.6.1.4.1.397.4.2.1.75 | ColumnchanStatEscapeDelay | read-only | mandatory | Escape Delay. Specifies the time in tenths of a second, that after receiving an ESC character, all characters are buffered before being forwarded. During this … |
| 1.3.6.1.4.1.397.4.2.1.76 | ColumnchanStatDestTsap | read-only | mandatory | Destination TSAP The destination Transport Service Access Point. |
| 1.3.6.1.4.1.397.4.2.1.77 | ColumnchanStatTransportLevelState | read-only | mandatory | Transport Level State. Transport Class 4 session statistics |
| 1.3.6.1.4.1.397.4.2.1.78 | ColumnchanStatLinkState | read-only | mandatory | Link State. The current state of the Link Control Protocol |
| 1.3.6.1.4.1.397.4.2.1.79 | ColumnchanStatProtocolState | read-only | mandatory | Protocol State. The current state of the Protocol Control Protocol |
| 1.3.6.1.4.1.397.4.2.1.80 | ColumnchanStatProtocol | read-only | mandatory | Protocol Displays the protocol configured for the channel |
| 1.3.6.1.4.1.397.4.2.1.81 | ColumnchanStatIdentity | read-only | mandatory | Identity. The current value of the IDENTITY field being put into the Link Control Protocol or Protocol Control Protocol commands. |
| 1.3.6.1.4.1.397.4.2.1.82 | ColumnchanStatDlciRxDe | read-only | mandatory | DLCI RX Count. The total number of Frames with the DE bit set received on this channel since it entered Data State. |
| 1.3.6.1.4.1.397.4.2.1.83 | ColumnchanStatDlciTxDe | read-only | mandatory | DLCI TX Count. The total number of Frames with the DE bit set transmitted on this channel since it entered Data State. |
| 1.3.6.1.4.1.397.4.2.1.84 | ColumnchanStatDlciRxFecn | read-only | mandatory | DLCI RX Fecn Count. The total number of Fecns (Forward Explicit Congestion Notification) received on this channel since active. |
| 1.3.6.1.4.1.397.4.2.1.85 | ColumnchanStatDlciTxFecn | read-only | mandatory | DLCI TX Fecn Count. The total number of Fecns (Forward Explicit Congestion Notification) transmitted on this channel since active. |
| 1.3.6.1.4.1.397.4.2.1.86 | ColumnchanStatDlciRxBecn | read-only | mandatory | DLCI RX Becn Count. The total number of Becns (Backwards Explicit Congestion Notification) received on this channel since active. |
| 1.3.6.1.4.1.397.4.2.1.87 | ColumnchanStatDlciTxBecn | read-only | mandatory | DLCI TX Becn Count. The total number of Becns (Backwards Explicit Congestion Notification) transmitted on this channel since active. |
| 1.3.6.1.4.1.397.4.2.1.88 | ColumnchanStatConnectedToControllerIndex | read-only | mandatory | Connected to Index. The INDEX of the CONTROLLER that this channel is connected to. |
| 1.3.6.1.4.1.397.4.3 | TablechanParamTable | not-accessible | mandatory | A table of channels associated with this Level 2 controller. |
| 1.3.6.1.4.1.397.4.3.1 | RowchanParamEntry | not-accessible | mandatory | An individual Channel. |
| 1.3.6.1.4.1.397.4.3.1.1 | ColumnchanParamIndex | read-only | mandatory | Index. The position of this channel in the controller channel Table. |
| 1.3.6.1.4.1.397.4.3.1.2 | ColumnchanParamName | read-write | mandatory | Name. A user defined name for routing calls to this channel. |
| 1.3.6.1.4.1.397.4.3.1.3 | ColumnchanParamDRCMask | read-write | mandatory | DRC Mask. A four character string used to force expicit routing to the named resource. |
| 1.3.6.1.4.1.397.4.3.1.4 | ColumnchanParamTerminalType | read-write | mandatory | Terminal Type. If the channel is to perform terminal emulation, then the setting defined will be specific to the users terminal envoking emulation. |
| 1.3.6.1.4.1.397.4.3.1.5 | ColumnchanParamCircuitType | read-write | mandatory | Circuit Type. The type of circuit used on this channel |
| 1.3.6.1.4.1.397.4.3.1.6 | ColumnchanParamOptions | read-write | mandatory | Options. A range of channel options, these options may be specified individually or added together. |
| 1.3.6.1.4.1.397.4.3.1.7 | ColumnchanParamBuffers | read-write | mandatory | Buffers. The number of system buffers allocated to this channel for incoming calls. |
| 1.3.6.1.4.1.397.4.3.1.8 | ColumnchanParamDiscMode | read-write | mandatory | DISC Mode. The number of the character in decimal which forces disconnection of the call. |
| 1.3.6.1.4.1.397.4.3.1.9 | ColumnchanParamMenuNumber | read-write | mandatory | Menu Number. Specifies which menu will be displayed to the user by the presentation service |
| 1.3.6.1.4.1.397.4.3.1.10 | ColumnchanParamHelpNumber | read-write | mandatory | Help Number. Specifies which help screen will be displayed to the user by the presentation service. |
| 1.3.6.1.4.1.397.4.3.1.11 | ColumnchanParamNewsNumber | read-write | mandatory | News Number. The number of the menu which will be displayed if an outgoing channel is unavailable. |
| 1.3.6.1.4.1.397.4.3.1.12 | ColumnchanParamCallPriority | read-write | mandatory | Call Priority. Call and Resource priorities are used primarily for providing alternate routing. For a call to succeed the Call Priority on the incoming channel… |
| 1.3.6.1.4.1.397.4.3.1.13 | ColumnchanParamResourcePriority | read-write | mandatory | Resource Priority. Call and Resource priorities are used primarily for providing alternate routing. For a call to succeed the Call Priority on the incoming cha… |
| 1.3.6.1.4.1.397.4.3.1.14 | ColumnchanParamPadEnable | read-write | mandatory | Pad Enable. The effect of the PAD Enable parameters are as follows: enable PAD services enabled. The logical channel will respond to X.29 packets. enable-rev R… |
| 1.3.6.1.4.1.397.4.3.1.15 | ColumnchanParamPadRecall | read-write | mandatory | Pad Recall (1). This parameter allows the user to escape from the data transfer state to the PAD command state. The permitted values are: 0 No PAD recall 1 Esc… |
| 1.3.6.1.4.1.397.4.3.1.16 | ColumnchanParamEcho | read-write | mandatory | Echo. Determines whether 'echo' is enabled or disabled. If set to controlled, the echo facility is controlled by the operator. |
| 1.3.6.1.4.1.397.4.3.1.17 | ColumnchanParamDataForwarding | read-write | mandatory | Data Forwarding. This parameter controls which character or characters cause the accumulated data to be forwarded. The possible values may be added together to… |
| 1.3.6.1.4.1.397.4.3.1.18 | ColumnchanParamDelay | read-write | mandatory | Delay. Specifies the idle time in tenths of a second, allowable between successive characters before the accumulated data is forwarded. A value of 0 disables t… |
| 1.3.6.1.4.1.397.4.3.1.19 | ColumnchanParamDRI | read-write | mandatory | DRI. Flow control of terminal by the MegaPAC. Valid settings are: enabled MegaPAC flow controls terminal using XON/XOFF. cts MegaPAC flow controls terminal usi… |
| 1.3.6.1.4.1.397.4.3.1.20 | ColumnchanParamPadSignals | read-write | mandatory | Pad Signals. Enable X.28 prompts and/or messages to be displayed on the users terminal. |
| 1.3.6.1.4.1.397.4.3.1.21 | ColumnchanParamBreak | read-write | mandatory | Break. The Action the MegaPAC will take on receipt of a Break Signal. The valid values are: 0 When the MegaPAC receives a Break Signal from the terminal no act… |
| 1.3.6.1.4.1.397.4.3.1.22 | ColumnchanParamPadding | read-write | mandatory | Padding. The number of NULL characters inserted after a carriage return. |
| 1.3.6.1.4.1.397.4.3.1.23 | ColumnchanParamFold | read-write | mandatory | Fold. The number of characters output before line folding occurs. Setting to 0 disables line folding. |
| 1.3.6.1.4.1.397.4.3.1.24 | ColumnchanParamDRO | read-write | mandatory | Data Restraint Out. |
| 1.3.6.1.4.1.397.4.3.1.25 | ColumnchanParamLFI | read-write | mandatory | LFI. This parameter controls linefeed insertion after a carriage return. The valid settings are: 0 Line feed insertion disabled. 1 A linefeed is inserted after… |
| 1.3.6.1.4.1.397.4.3.1.26 | ColumnchanParamLFPad | read-write | mandatory | LFPad. The number of NULL padding characters sent to a device following a linefeed character. |
| 1.3.6.1.4.1.397.4.3.1.27 | ColumnchanParamEdit | read-write | mandatory | Edit. Controls editing of text in data transfer state. |
| 1.3.6.1.4.1.397.4.3.1.28 | ColumnchanParamCharDel | read-write | mandatory | Char Delete. The keystroke used for deleting a character. |
| 1.3.6.1.4.1.397.4.3.1.29 | ColumnchanParamBufferDel | read-write | mandatory | Buffer Delete. The keystroke used for deleting the buffer. |
| 1.3.6.1.4.1.397.4.3.1.30 | ColumnchanParamDisp | read-write | mandatory | Disp. The keystroke used to redisplay the data in the buffer. |
| 1.3.6.1.4.1.397.4.3.1.31 | ColumnchanParamEditServiceSignals | read-write | mandatory | Edit Service Signals. This parameter enables the user to edit the PAD service signals (echoing). The valid settings are: 0 No editing PAD service signals are e… |
| 1.3.6.1.4.1.397.4.3.1.32 | ColumnchanParamEchoMask | read-write | mandatory | Echo Mask. This parameter controls the characters which should not be echoed. The valid settings are: 0 All characters should be echoed to the terminal. 1 do n… |
| 1.3.6.1.4.1.397.4.3.1.33 | ColumnchanParamParityTreatment | read-write | mandatory | Parity Treatment. Determines the parity generation and checking performed valid settings are: 0 No parity generation or checking. 1 Check parity. 2 Generate pa… |
| 1.3.6.1.4.1.397.4.3.1.34 | ColumnchanParamPageWait | read-write | mandatory | Page Wait. Specifies the number of lines to be transmitted, after which the MegaPAC will wait until instructed by the user to continue sending data (by enterin… |
| 1.3.6.1.4.1.397.4.3.1.35 | ColumnchanParamForce | read-write | mandatory | Force. The ASCII character which will force data forwarding, 0 disables forced data forwarding. |
| 1.3.6.1.4.1.397.4.3.1.36 | ColumnchanParamBreakChar | read-write | mandatory | Break Character. The ASCII character in decimal which is used to simulate a BREAK signal. |
| 1.3.6.1.4.1.397.4.3.1.37 | ColumnchanParamNetworkParity | read-write | mandatory | Network Parity. With the Terminal type set to ASYN+X28, the parity can be forced onto the network side by selecting the approriate value. |
| 1.3.6.1.4.1.397.4.3.1.38 | ColumnchanParamEscapeDelay | read-write | mandatory | Escape Delay. Specifies the time in tenths of a second, that after receiving an ESC character, all characters are buffered before being forwarded. During this … |
| 1.3.6.1.4.1.397.4.3.1.39 | ColumnchanParamStationAddress | read-write | mandatory | Station Address. Physical Unit Address of the Cluster Controller. |
| 1.3.6.1.4.1.397.4.3.1.40 | ColumnchanParamProvideXID | read-write | mandatory | Provide XID. |
| 1.3.6.1.4.1.397.4.3.1.41 | ColumnchanParamMode | read-write | mandatory | Mode. This parameter provides a number of additional connection facilities for channels on virtual controllers. |
| 1.3.6.1.4.1.397.4.3.1.42 | ColumnchanParamPortMatch | read-write | mandatory | Port Match. This parameter optionally allows the Source and Destination ports to be used in conjunction with the IP address for routing. |
| 1.3.6.1.4.1.397.4.3.1.43 | ColumnchanParamReverseTelnetPort | read-write | mandatory | Reverse Telnet Port. The port number which will respond to TELNET open requests. The default value for TELNET ports is '23'. |
| 1.3.6.1.4.1.397.4.3.1.44 | ColumnchanParamBroadcastFilterTimer | read-write | mandatory | Broadcast Filter Timer. |
| 1.3.6.1.4.1.397.4.3.1.45 | ColumnchanParamInhibitLearning | read-write | mandatory | Inhibit Learning. This parameter determines whether the 'bridge' will work in Directed or Learning mode. If InhibitLearning is set to 'Yes' then the bridge wil… |
| 1.3.6.1.4.1.397.4.3.1.46 | ColumnchanParamRetainSession | read-write | mandatory | Retain Session. This parameter determines if and how a session will be cleared down when the call is cleared. The parameter is only applicable to channels (2) … |
| 1.3.6.1.4.1.397.4.3.1.47 | ColumnchanParamPrinterType | read-write | mandatory | Printer Type. If set to IBM the logical channel will act as an appication system printer, otherwise it operates in screen emulation mode. Only applicable to ch… |
| 1.3.6.1.4.1.397.4.3.1.48 | ColumnchanParamScreenPrinter | read-write | mandatory | Screen Printer. If set to YES, screen printer requests are to be processed and sent to this LU address (in this mode, the terminal attaching to this channel MU… |
| 1.3.6.1.4.1.397.4.3.1.49 | ColumnchanParamLocalPrinter | read-write | mandatory | Local Printer. This parameter specifies the channel to which screen printing should be directed. It takes precedence over the value defined by the DEFAULT LOCA… |
| 1.3.6.1.4.1.397.4.3.1.50 | ColumnchanParamInterlockBind | read-write | mandatory | Interlock Bind. This parameter is only applicable to channels (2) to (n). When set to YES, an UNBIND request will be sent to the host upon disconnecting. Note:… |
| 1.3.6.1.4.1.397.4.3.1.51 | ColumnchanParamRedirectPrintTo | read-write | mandatory | Redirect Printer To. This parameter is only applicable to channels (2) to (n). If set to (0), then no redirection takes place. Otherwise, LU type 1 session dat… |
| 1.3.6.1.4.1.397.4.3.1.52 | ColumnchanParamLUBase | read-write | mandatory | First LU defined by up-stream host. |
| 1.3.6.1.4.1.397.4.3.1.53 | ColumnchanParamLUOffset | read-write | mandatory | LU Offset. |
| 1.3.6.1.4.1.397.4.3.1.54 | ColumnchanParamLUTotal | read-write | mandatory | Total number of LUs to be allocated to down- stream PU's. |
| 1.3.6.1.4.1.397.4.3.1.55 | ColumnchanParamDlciBase | read-write | mandatory | The channel DLCI address. |
| 1.3.6.1.4.1.397.4.3.1.56 | ColumnchanParamDlciAdjacentBase | read-write | mandatory | The DLCI number on the cross connected port in the MegaPAC used when groups of channels are being switched across the MegaPAC. Used in conjunction with the DRC… |
| 1.3.6.1.4.1.397.4.3.1.57 | ColumnchanParamDlciPriority | read-write | mandatory | A value from 0 to 32 indicating the relative priority of this DLCI to the other data streams on this trunk, i.e. other DLCIs. The higher the value the higher t… |
| 1.3.6.1.4.1.397.4.3.1.58 | ColumnchanParamDlciATM | read-write | mandatory | Determines whether fragmentation should be implemented on frames on this link. |
| 1.3.6.1.4.1.397.4.3.1.59 | ColumnchanParamDlciCir | read-write | mandatory | The committed information rate for this DLCI - the units are in 80bits/sec |
| 1.3.6.1.4.1.397.4.3.1.60 | ColumnchanParamDlciBc | read-write | mandatory | Bc(Burst Commit) - the committed burst that the MegaPAC will allow to be transmitted on this DLCI; the units are 80bits. |
| 1.3.6.1.4.1.397.4.3.1.61 | ColumnchanParamDlciBe | read-write | mandatory | Be(Burst Excess) is the excess above the Bc that will be transmitted to the line by the MegaPAC in any given Tc. The units are 80bits. |
| 1.3.6.1.4.1.397.4.3.1.62 | ColumnchanParamDlciDe | read-write | mandatory | DE(Discard Eligibility) when set will indicate that in a congested situation this frame should be discarded first. |
| 1.3.6.1.4.1.397.4.3.1.63 | ColumnchanParamDlciProtocol | read-write | mandatory | Specifies header in RFC 1480/1490 connections |
| 1.3.6.1.4.1.397.4.3.1.64 | ColumnchanParamDlciDsap | read-write | mandatory | Used in RFC 1490 SNA connections - each SAP identifies a specific PU, hence by using different SAPs, multiple PUs can be multiplexed on the same Frame Relay PVC |
| 1.3.6.1.4.1.397.4.3.1.65 | ColumnchanParamDlciSsap | read-write | mandatory | Used in RFC 1490 SNA connections - each SAP identifies a specific PU, hence by using different SAPs, multiple PUs can be multiplexed on the same Frame Relay PVC |
| 1.3.6.1.4.1.397.4.3.1.66 | ColumnchanParamDlciPutype | read-write | mandatory | Used in RFC 1490 SNA connections - specifies type 2.0 or 2.1 |
| 1.3.6.1.4.1.397.5 | Nodex25File | |||
| 1.3.6.1.4.1.397.5.1 | Scalarx25FileSize | read-write | mandatory | X25 file size. The number of entries configured into the X25 file. |
| 1.3.6.1.4.1.397.5.2 | Tablex25Table | not-accessible | mandatory | A table of X.25 routing entries |
| 1.3.6.1.4.1.397.5.2.1 | Rowx25Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.397.5.2.1.1 | Columnx25Index | read-only | mandatory | Index. The index to an individual X.25 entry |
| 1.3.6.1.4.1.397.5.2.1.2 | Columnx25Name | read-write | mandatory | Name. A 4 character name which is used to match on the 'NAME' parameter of the channel on which a call will be routed over the X.25 network. |
| 1.3.6.1.4.1.397.5.2.1.3 | Columnx25AddressGroup | read-write | mandatory | Address Group. An integer used to partition the X.25 routing tables. Any match on a channel name will only take effect if the channel 'AddressGroup' parameter … |
| 1.3.6.1.4.1.397.5.2.1.4 | Columnx25Address | read-write | mandatory | Address. The numeric address which is used to match on the incoming X.25 address in a call request packet. |
| 1.3.6.1.4.1.397.5.2.1.5 | Columnx25UserData | read-write | mandatory | User Data A text field in which Call User Data or Facilities may be placed. The user data will be inserted into call request packets generated by the MegaPAC. |
| 1.3.6.1.4.1.397.6 | NodenameFile | |||
| 1.3.6.1.4.1.397.6.1 | ScalarnameFileSize | read-write | mandatory | Name File Size. The number of entries configured into the NAME file. |
| 1.3.6.1.4.1.397.6.2 | TablenameTable | not-accessible | mandatory | A table of 'Name' entries. |
| 1.3.6.1.4.1.397.6.2.1 | RownameEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.397.6.2.1.1 | ColumnnameIndex | read-only | mandatory | Index. The index into the name table. |
| 1.3.6.1.4.1.397.6.2.1.2 | ColumnnameName | read-write | mandatory | Name. A string of up to 8 characters in length which is typed in by the network user in order to establish a connection to a specific resource. |
| 1.3.6.1.4.1.397.6.2.1.3 | ColumnnameDRCMask | read-write | mandatory | DRC Mask. The four character resource (channel) name to which the call will be directed. |
| 1.3.6.1.4.1.397.6.2.1.4 | ColumnnameCallPriority | read-write | mandatory | Call Priority. The internal call priority which will be assigned to the call. |
| 1.3.6.1.4.1.397.6.2.1.5 | ColumnnameBilling | read-write | mandatory | Billing If enabled, statistics relating to the call will be sent to the billing file. |
| 1.3.6.1.4.1.397.6.2.1.6 | ColumnnameOptions | read-write | mandatory | Options Enables the appropriate terminal emulation options. |
| 1.3.6.1.4.1.397.7 | NodepassFile | |||
| 1.3.6.1.4.1.397.7.1 | ScalarpassFileSize | read-only | mandatory | Pass File Size. The number of entries configured into the PASSWORD file. |
| 1.3.6.1.4.1.397.8 | NodemacFile | |||
| 1.3.6.1.4.1.397.8.1 | ScalarmacFileSize | read-write | mandatory | Mac File Size. The number of entries configured into the MAC file. |
| 1.3.6.1.4.1.397.8.2 | TablemacTable | not-accessible | mandatory | A table of MAC entries |
| 1.3.6.1.4.1.397.8.2.1 | RowmacEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.397.8.2.1.1 | ColumnmacIndex | read-only | mandatory | Index. An index to an individual entry in the MAC table. |
| 1.3.6.1.4.1.397.8.2.1.2 | ColumnmacName | read-write | mandatory | Name. The level 2 controller name to which this entry applies. |
| 1.3.6.1.4.1.397.8.2.1.3 | ColumnmacFunction | read-write | mandatory | Function. The function field determines what action should be taken if their is a match on this entry. |
| 1.3.6.1.4.1.397.8.2.1.4 | ColumnmacOptions | read-write | mandatory | Options. Specific actions that may be envoked in conjunction with the function field. |
| 1.3.6.1.4.1.397.8.2.1.5 | ColumnmacSelector | read-write | mandatory | Selector. This field can contain a string of between 0 and 32 Hexadecimal characters, that must be matched by the Function DAD, CAD, CUD or FAC. |
| 1.3.6.1.4.1.397.8.2.1.6 | ColumnmacGenerator | read-write | mandatory | Generator. This field can contain a string of between 0 and 32 Hexadecimal characters, and can have different purposes depending on the Function or Options fie… |
| 1.3.6.1.4.1.397.9 | NodeilanFile | |||
| 1.3.6.1.4.1.397.9.1 | ScalarilanFileSize | read-write | mandatory | Ilan File Size. The number of entries configured into the ILAN file. |
| 1.3.6.1.4.1.397.9.2 | TableilanTable | not-accessible | mandatory | A table of ILAN entries |
| 1.3.6.1.4.1.397.9.2.1 | RowilanEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.397.9.2.1.1 | ColumnilanIndex | read-only | mandatory | Index. An index to an individual entry in the ILAN table. |
| 1.3.6.1.4.1.397.9.2.1.2 | ColumnilanName | read-write | mandatory | Name. The Resource which this entry applies to. |
| 1.3.6.1.4.1.397.9.2.1.3 | ColumnilanOptions | read-write | mandatory | Options ISO Allows transport calls to be set up on the outgoing channel. EXPE Allows expedited data to be sent. |
| 1.3.6.1.4.1.397.9.2.1.4 | ColumnilanEthernetAddress | read-write | mandatory | Ethernet Address. The destination MAC address of the named host. |
| 1.3.6.1.4.1.397.9.2.1.5 | ColumnilanTSAP | read-write | mandatory | TSAP. The Transport Service Access Point required on the destination Host. |
| 1.3.6.1.4.1.397.10 | NodeelogFile | |||
| 1.3.6.1.4.1.397.10.1 | ScalarelogFileSize | read-write | mandatory | Elog File Size. The size of the error log file. |
| 1.3.6.1.4.1.397.10.2 | TableelogTable | not-accessible | mandatory | A table of Error Log entries. |
| 1.3.6.1.4.1.397.10.2.1 | RowelogEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.397.10.2.1.1 | ColumnelogIndex | read-only | mandatory | Index. The index to an Error Log entry. |
| 1.3.6.1.4.1.397.10.2.1.2 | ColumnelogRecord | read-only | mandatory | Record. The Error Log entry in ascii format. |
| 1.3.6.1.4.1.397.32 | NodeconfigChange | Enterprise Specific trap for MegaPAC Configuration Change. | ||
| 1.3.6.1.4.1.397.33 | NodevcpConnect | Enterprise Specific trap for MegaPAC VCP Connect. | ||
| 1.3.6.1.4.1.397.34 | NodevcpDisconnect | Enterprise Specific trap for MegaPAC VCP Disconnect. | ||
| 1.3.6.1.4.1.397.35 | NodebillThreshReached | Enterprise Specific trap for MegaPAC- threshold reached for No. of BILLING records outstanding. | ||
| 1.3.6.1.4.1.397.96 | NodelinkNoResponse | Enterprise Specific trap for MegaPAC Link Not Responding. | ||
| 1.3.6.1.4.1.397.97 | NodelinkCarrierLoss | Enterprise Specific trap for MegaPAC Link Carrier Loss. | ||
| 1.3.6.1.4.1.397.98 | NodelinkAddressErr | Enterprise Specific trap for MegaPAC Link Address Error. | ||
| 1.3.6.1.4.1.397.99 | NodeframeLessThan2 | Enterprise Specific trap for MegaPAC Link Frame < 2 BYTES. | ||
| 1.3.6.1.4.1.397.100 | NodeifieldTooLarge | Enterprise Specific trap for MegaPAC Link I-Field too Large. | ||
| 1.3.6.1.4.1.397.103 | NodelinkRestart | Enterprise Specific trap for MegaPAC Link restart. | ||
| 1.3.6.1.4.1.397.104 | NodelinkBlocked | Enterprise Specific trap for MegaPAC LINK BLOCKED (Flow controlled). | ||
| 1.3.6.1.4.1.397.105 | NodelinkDisconnect | Enterprise Specific trap for MegaPAC Link Disconnected. | ||
| 1.3.6.1.4.1.397.112 | NodelinkFrmrRecvd | Enterprise Specific trap for MegaPAC Link FRMR received. | ||
| 1.3.6.1.4.1.397.113 | NodelinkDmResponse | Enterprise Specific trap for MegaPAC Link DM response. | ||
| 1.3.6.1.4.1.397.114 | NodelinkBadNr | Enterprise Specific trap for MegaPAC Link Bad N(r). | ||
| 1.3.6.1.4.1.397.115 | NodelinkDown | Enterprise Specific trap for MegaPAC Link Down. | ||
| 1.3.6.1.4.1.397.116 | NodelinkFrmrSent | Enterprise Specific trap for MegaPAC Link FRMR sent. | ||
| 1.3.6.1.4.1.397.117 | NodecrcThreshExceeded | Enterprise Specific trap for MegaPAC CRC Threshold Exceeded. | ||
| 1.3.6.1.4.1.397.121 | NodelinkManRestart | Enterprise Specific trap for MegaPAC Link Manual restart. | ||
| 1.3.6.1.4.1.397.122 | NodetestIndicationResponse | Enterprise Specific trap for MegaPAC 'TEST' command Indication/Response. | ||
| 1.3.6.1.4.1.397.123 | NodeinterfaceFailure | Enterprise Specific trap for MegaPAC Inteface (e.g. chip) failure. | ||
| 1.3.6.1.4.1.397.124 | NodexidComRecvd | Enterprise Specific trap for MegaPAC XID command received. | ||
| 1.3.6.1.4.1.397.166 | NodebufferOverrun | Enterprise Specific trap for MegaPAC Buffer Overrun Error. | ||
| 1.3.6.1.4.1.397.200 | NodeconnectTimeWarn | Enterprise Specific trap for MegaPAC Connect Time Warning. | ||
| 1.3.6.1.4.1.397.230 | NodeisdnNameAssigned | Enterprise Specific trap for MegaPAC ISDN/V25 bis Name Assigned. | ||
| 1.3.6.1.4.1.397.231 | NodeisdnNameDeAassigned | Enterprise Specific trap for MegaPAC ISDN/V25 bis Name De-Assigned. |