SDLC-OPT-MIB
199 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress mgmt NetworkAddress TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.2 | Nodecdx6500Configuration | |||
| 1.3.6.1.4.1.449.2.1.2.1 | Nodecdx6500CfgProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1 | Nodecdx6500PCTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.12 | Tablecdx6500PCTSDLCPortTable | not-accessible | mandatory | All of the configuration parameters relevant to the SDLC Port table. |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1 | Rowcdx6500PCTSDLCPortEntry | not-accessible | mandatory | A row of SDLC Port configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.1 | Columncdx6500sdlcpCfgPortNum | read-only | mandatory | Specifies a specific port (physical port number) in the node. |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.2 | Columncdx6500sdlcpSubType | read-only | mandatory | This is the SDLC port subtype hpad - Host PAD. tpad - Terminal PAD. newvalHpad - same functionality as 'hpad', new enumeration added for RFC1155 compatibility. |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.3 | Columncdx6500sdlcpTxCoding | read-only | mandatory | This is the data encoding used on the SDLC link. nrz - Non Return to Zero nrzi - Non Return to Zero Inverted newvalNrz - same functionality as 'nrz', new enume… |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.4 | Columncdx6500sdlcpLineType | read-only | mandatory | Type of line, indicates whether half duplex or full duplex signals are being generated. fdx - communications occuring in both directions simultaneously between… |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.5 | Columncdx6500sdlcpTxType | read-only | mandatory | This is the transmission mode used on the line. tws - Two way Simultaneout. twa - Two Way Alternate used by most controllers. newvalTws - same functionality as… |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.6 | Columncdx6500sdlcpSendSigDelay | read-only | deprecated | This object is replaced by cdx6500sdlcpHPADResponseDelay. This is a configurable delay that defines the amount of time that the HPAD delays before sending a re… |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.7 | Columncdx6500sdlcpClock | read-only | mandatory | int - Internal clock source. ext - External clock source. newvalInt - same functionality as 'int', new enumeration added for RFC1155 compatibility. |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.8 | Columncdx6500sdlcpClockSpeed | read-only | mandatory | This is the speed of the port in bits per second, when using internal clocking. |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.9 | Columncdx6500sdlcpNumControllers | read-only | mandatory | This is the number of controllers (PU TYPE 1 or PU TYPE 2 devices) on the SDLC line. |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.10 | Columncdx6500sdlcpPollTimer | read-only | mandatory | Worst case delay for a slave to respond to a poll frame sent by the master, including modem turn around time, etc. Value in 10ths of second ( 30 = 3.0 seconds … |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.11 | Columncdx6500sdlcpPollFrequency | read-only | mandatory | Time in milliseconds between polls when no data is exchanged. |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.12 | Columncdx6500sdlcpTries | read-only | mandatory | Maximum number of attempts to complete a transmission. |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.13 | Columncdx6500sdlcpOptions | read-only | mandatory | Select options on this SDLC port as follows: NONE - no option specified MARKi - port uses mark idle between frame exchanges (Required by System 36 - AS/400 ser… |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.14 | Columncdx6500sdlcpPortAddress | read-only | mandatory | When an SDLC port makes a call, this address is inserted into the calling address field. |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.15 | Columncdx6500sdlcpPortOptions | read-only | mandatory | Specify any of the following port control options: NONE - no option specified MB - raise Pin 22 when the port becomes disabled |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.16 | Columncdx6500sdlcpHPADResponseDelay | read-only | mandatory | This object replaces cdx6500sdlcpSendSigDelay. This is a configurable delay that defines the amount of time that the HPAD delays before sending a response to t… |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.17 | Columncdx6500sdlcpMaxFrameSize | read-only | mandatory | Maximum size (in bytes) of a frame, excluding the frame header and CRC. |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.18 | Columncdx6500sdlcpRtsCtsDelay | read-only | mandatory | Delay in milliseconds that the HDX DCE TPAD or the HDXDCE HPAD waits from the time it detects RTS go HIGH until the time it raises CTS. It is accurate to +/- 2… |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.19 | Columncdx6500sdlcpElectricalInterfaceType | read-only | mandatory | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 -… |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.20 | Columncdx6500sdlcpV24ElectricalInterfaceOption | read-only | mandatory | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| 1.3.6.1.4.1.449.2.1.2.1.1.12.1.21 | Columncdx6500sdlcpHighSpeedElectricalInterfaceOption | read-only | mandatory | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| 1.3.6.1.4.1.449.2.1.2.1.3 | Nodecdx6500PCTStationProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.3.4 | Tablecdx6500SPCTSDLCStationTable | not-accessible | mandatory | All of the configuration parameters relevant to the SDLC Station table. |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1 | Rowcdx6500SPCTSDLCStationEntry | not-accessible | mandatory | A row of SDLC station configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.1 | Columncdx6500sdlcsCfgPortNum | read-only | mandatory | Refers to the physical port number. |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.2 | Columncdx6500sdlcsCfgStationNum | read-only | mandatory | The number of the controller on the multidrop line. Also used for routing purposes. |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.3 | Columncdx6500sdlcsStationAddr | read-only | mandatory | The station address on the multidrop line. |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.4 | Columncdx6500sdlcsFrameWinSize | read-only | mandatory | Frame level window size must be set to the same value in devices at each end of the link. |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.5 | Columncdx6500sdlcsAutocallMnem | read-only | mandatory | This mnemonic references the remote address which will be called when polling activity is detected on the sdlc line. |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.6 | Columncdx6500sdlcsProtocolID | read-only | mandatory | The protocol identifier is the first four bytes of the call user data. If not configured the PAD will use C3000000 as the protocol ID in the call. |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.7 | Columncdx6500sdlcsCUG | read-only | mandatory | The station may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except (e.g. 12,34,56,09,02,03). 00… |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.8 | Columncdx6500sdlcsOptions | read-only | mandatory | Select options on this SDLC station as follows: NONE - no option specified. CUG - check closed user group in incoming calls, and insert closed user group facil… |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.9 | Columncdx6500sdlcsStationID | read-only | mandatory | This is the identification sent by the TPAD in a response. to a QXID when XIDs are enabled in the QLLC Options. |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.10 | Columncdx6500sdlcsBillingFlag | read-only | mandatory | This controls whether billing (accounting) records will be created for calls on this port. off - Billing (accounting) records will not be created for calls on … |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.11 | Columncdx6500sdlcsStnSubaddress | read-only | mandatory | The calling subaddress is appended to the port address to create the calling address in the autocall generated. |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.12 | Columncdx6500sdlcsGroupAddress | read-only | mandatory | This is the address of the poll group to which this station belongs. Enter an address of 0x00 for no group membership. |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.13 | Columncdx6500sdlcsX25Password | read-only | mandatory | Only TPAD initiated autocall packets shall use this feature. The X.25 Network Password which may be up to 12 bytes long is inserted in the CUD of the Call Requ… |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.14 | Columncdx6500sdlcsProtectionLevel | read-only | mandatory | This specifies the level of data or connection protection which will be applied to calls to or from this port. The actual level for a call will be negotiated t… |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.15 | Columncdx6500sdlcsReconnectTimeout | read-only | mandatory | This specifies the number of seconds that DCP on the originating side will wait between reconnection attempts. |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.16 | Columncdx6500sdlcsReconnectLimit | read-only | mandatory | This specifies the number of times that DCP on the originating side will attempt to reconnect before clearing the call. If 0 is entered, it will not attempt to… |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.17 | Columncdx6500sdlcsTrafficPriority | read-only | optional | This is the traffic priority of the SDLC station; low, medium, high, or expedite. newvalLowPriority : same functionality as 'lowPriority', new enumeration adde… |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.18 | Columncdx6500sdlcsCallTimer | read-only | mandatory | This specifies the time before the next call is made. If 0 is entered, the time to the next call is handled internally. The time is in seconds. |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.19 | Columncdx6500sdlcsIdleTimer | read-only | mandatory | The Link Idle Timer is used by the SNA Dial on Demand feature for determining how long the station should wait for a data frame before bringing the X.25 call d… |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.20 | Columncdx6500sdlcsVerConnTimer | read-only | mandatory | The Verify Connection Timer is used by the SNA Dial on Demand feature for periodically verifying that the connection to the remote station is still active, aft… |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.21 | Columncdx6500sdlcsUnsusWaitTimer | read-only | mandatory | The Unsuspend Wait Timer is used by the SNA Dial on Demand feature for determining how long the station will wait in LINK-UNSUSPENDING state after receiving a … |
| 1.3.6.1.4.1.449.2.1.2.1.3.4.1.22 | Columncdx6500sdlcsMaxCallAttempts | read-only | mandatory | The Max Call Attempts is used to specify the number of times that the SDLC stations will attempt to autocall a remote destination. A value of zero will allow u… |
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.1 | Nodecdx6500StatProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1 | Nodecdx6500PSTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.12 | Tablecdx6500PPSTSDLCPortTable | not-accessible | mandatory | All of the statistics parameters relevant to the SDLC Port table. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1 | Rowcdx6500PPSTSDLCPortEntry | not-accessible | mandatory | A row of SDLC Port statistics parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.1 | Columncdx6500sdlcpStatsPortNum | read-only | mandatory | Specifies a specific port (physical port number) in the node. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.2 | Columncdx6500sdlcpPortStatus | read-only | mandatory | Specifies the current port status. up : At least one station is responding to polls. down : None of the stattions are responding to polls. disabled : The port … |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.3 | Columncdx6500sdlcpPortSpeed | read-only | mandatory | The measured port speed in bits per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.4 | Columncdx6500sdlcpCharInTotal | read-only | mandatory | Total number of characters received until now, not including all SDLC header characters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.5 | Columncdx6500sdlcpCharOutTotal | read-only | mandatory | Total number of characters transmitted until now, not including all SDLC header characters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.6 | Columncdx6500sdlcpCharsInPerSec | read-only | mandatory | The average number of characters received per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.7 | Columncdx6500sdlcpCharsOutPerSec | read-only | mandatory | The average number of characters transmitted per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.8 | Columncdx6500sdlcpFrameInTotal | read-only | mandatory | Total number of SDLC frames received until now. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.9 | Columncdx6500sdlcpFrameOutTotal | read-only | mandatory | The total number of SDLC frames transmitted until now. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.10 | Columncdx6500sdlcpFramesInPerSec | read-only | mandatory | The average number of frames received per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.11 | Columncdx6500sdlcpFramesOutPerSec | read-only | mandatory | The average number of frames transmitted per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.12 | Columncdx6500sdlcpStateChange | read-only | mandatory | The date and time when the link entered the current state. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.13 | Columncdx6500sdlcpLinkDowns | read-only | mandatory | Total number of times link has made a transition from the UP state to the DOWN state. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.14 | Columncdx6500sdlcpUtilizationIn | read-only | mandatory | Indicates a percentage of the link resources currently in use in the IN(from the line to the port) direction. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.15 | Columncdx6500sdlcpUtilizationOut | read-only | mandatory | Indicates a percentage of the link resources currently in use in the OUT(from the port to the line) direction. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.16 | Columncdx6500sdlcpOverrunErrors | read-only | mandatory | Total number of overrun errors counted by the I/O driver. Overrun errors occur when received data is lost because it cannot be processed by the CPU. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.17 | Columncdx6500sdlcpUnderrunErrors | read-only | mandatory | Total number of underrun errors counted by the I/O driver. Underrun errors occur when the transmission of a frame cannot be completed because of momentary CPU … |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.18 | Columncdx6500sdlcpCRCErrors | read-only | mandatory | Total number of CRC errors counted by the I/O driver. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.19 | Columncdx6500sdlcpPacketsQueued | read-only | mandatory | Total number of packets queued at the SDLC protocol layer by the transmitter. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.20 | Columncdx6500sdlcpRRInFrames | read-only | mandatory | Total number of RR frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.21 | Columncdx6500sdlcpRROutFrames | read-only | mandatory | Total number of RR frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.22 | Columncdx6500sdlcpRNRInFrames | read-only | mandatory | Total number of RNR frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.23 | Columncdx6500sdlcpRNROutFrames | read-only | mandatory | Total number of RNR frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.24 | Columncdx6500sdlcpSNRMInFrames | read-only | mandatory | Total number of SNRM frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.25 | Columncdx6500sdlcpSNRMOutFrames | read-only | mandatory | Total number of SNRM frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.26 | Columncdx6500sdlcpUAInFrames | read-only | mandatory | Total number of UA frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.27 | Columncdx6500sdlcpUAOutFrames | read-only | mandatory | Total number of UA frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.28 | Columncdx6500sdlcpDMInFrames | read-only | mandatory | Total number of DM frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.29 | Columncdx6500sdlcpDMOutFrames | read-only | mandatory | Total number of DM frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.30 | Columncdx6500sdlcpXIDInFrames | read-only | mandatory | Total number of XID frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.31 | Columncdx6500sdlcpXIDOutFrames | read-only | mandatory | Total number of XID frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.32 | Columncdx6500sdlcpREJInFrames | read-only | mandatory | Total number of REJ frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.33 | Columncdx6500sdlcpREJOutFrames | read-only | mandatory | Total number of REJ frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.34 | Columncdx6500sdlcpDISCInFrames | read-only | mandatory | Total number of DISC frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.35 | Columncdx6500sdlcpDISCOutFrames | read-only | mandatory | Total number of DISC frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.36 | Columncdx6500sdlcpRDInFrames | read-only | mandatory | Total number of RD frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.37 | Columncdx6500sdlcpRDOutFrames | read-only | mandatory | Total number of RD frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.38 | Columncdx6500sdlcpFRMRInFrames | read-only | mandatory | Total number of FRMR frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.39 | Columncdx6500sdlcpFRMROutFrames | read-only | mandatory | Total number of FRMR frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.40 | Columncdx6500sdlcpUPInFrames | read-only | mandatory | Total number of UP frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.41 | Columncdx6500sdlcpUPOutFrames | read-only | mandatory | Total number of UP frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.42 | Columncdx6500sdlcpTESTInFrames | read-only | mandatory | Total number of TEST frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.43 | Columncdx6500sdlcpTESTOutFrames | read-only | mandatory | Total number of TEST frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.44 | Columncdx6500sdlcpXIDNullInFrames | read-only | mandatory | Total number of XID Null frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.45 | Columncdx6500sdlcpXIDNullOutFrames | read-only | mandatory | Total number of XID Null frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.46 | Columncdx6500sdlcpXID0InFrames | read-only | mandatory | Total number of XID Type 0 frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.47 | Columncdx6500sdlcpXID0OutFrames | read-only | mandatory | Total number of XID Type 0 frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.48 | Columncdx6500sdlcpXID1InFrames | read-only | mandatory | Total number of XID Type 1 frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.49 | Columncdx6500sdlcpXID1OutFrames | read-only | mandatory | Total number of XID Type 1 frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.50 | Columncdx6500sdlcpXID3InFrames | read-only | mandatory | Total number of XID Type 3 frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.1.12.1.51 | Columncdx6500sdlcpXID3OutFrames | read-only | mandatory | Total number of XID Type 3 frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3 | Nodecdx6500PSTStationProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.3.4 | Tablecdx6500SPSTSDLCStationTable | not-accessible | mandatory | All of the statistics parameters relevant to the SDLC Station table. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1 | Rowcdx6500SPSTSDLCStationEntry | not-accessible | mandatory | A row of SDLC station Statistics parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.1 | Columncdx6500sdlcsStatsPortNum | read-only | mandatory | Refers to the physical port number. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.2 | Columncdx6500sdlcsStatsStationNum | read-only | mandatory | Station reference number. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.3 | Columncdx6500sdlcsStatsStationAddr | read-only | mandatory | Configured station address. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.4 | Columncdx6500sdlcsQLLCState | read-only | mandatory | Indicates the status of the QLLC layer: INOPERATIVE : No connection exists with the station. LINK-CLOSED : X.25 call is connected, but there has been no succes… |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.5 | Columncdx6500sdlcsCharInTotal | read-only | mandatory | Total number of characters received until now, not including SDLC header characters. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.6 | Columncdx6500sdlcsCharOutTotal | read-only | mandatory | Total number of characters transmitted until now, not including SDLC header characters. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.7 | Columncdx6500sdlcsCharsInPerSec | read-only | mandatory | The average number of characters received per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.8 | Columncdx6500sdlcsCharsOutPerSec | read-only | mandatory | The average number of characters transmitted per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.9 | Columncdx6500sdlcsFrameInTotal | read-only | mandatory | Total number of frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.10 | Columncdx6500sdlcsFrameOutTotal | read-only | mandatory | Total number of frames transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.11 | Columncdx6500sdlcsFramesInPerSec | read-only | mandatory | The average number of frames received per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.12 | Columncdx6500sdlcsFramesOutPerSec | read-only | mandatory | The average number of frames transmitted per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.13 | Columncdx6500sdlcsQRRInTotal | read-only | mandatory | Total number of QRR packets received until now. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.14 | Columncdx6500sdlcsQRROutTotal | read-only | mandatory | Total number of QRR packets transmitted until now. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.15 | Columncdx6500sdlcsUtilizationIn | read-only | mandatory | Indicates a percentage of the link resources currently in use in the IN(from the line to the port) direction. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.16 | Columncdx6500sdlcsUtilizationOut | read-only | mandatory | Indicates a percentage of the link resources currently in use in the OUT(from the port to the line) direction. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.17 | Columncdx6500sdlcsPacketsQueued | read-only | mandatory | Total number of packets queued at the SDLC protocol layer by the transmitter. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.18 | Columncdx6500sdlcsRRInFrames | read-only | mandatory | Total number of RR frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.19 | Columncdx6500sdlcsRROutFrames | read-only | mandatory | Total number of RR frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.20 | Columncdx6500sdlcsRNRInFrames | read-only | mandatory | Total number of RNR frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.21 | Columncdx6500sdlcsRNROutFrames | read-only | mandatory | Total number of RNR frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.22 | Columncdx6500sdlcsSNRMInFrames | read-only | mandatory | Total number of SNRM frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.23 | Columncdx6500sdlcsSNRMOutFrames | read-only | mandatory | Total number of SNRM frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.24 | Columncdx6500sdlcsUAInFrames | read-only | mandatory | Total number of UA frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.25 | Columncdx6500sdlcsUAOutFrames | read-only | mandatory | Total number of UA frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.26 | Columncdx6500sdlcsDMInFrames | read-only | mandatory | Total number of DM frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.27 | Columncdx6500sdlcsDMOutFrames | read-only | mandatory | Total number of DM frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.28 | Columncdx6500sdlcsXIDInFrames | read-only | mandatory | Total number of XID frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.29 | Columncdx6500sdlcsXIDOutFrames | read-only | mandatory | Total number of XID frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.30 | Columncdx6500sdlcsREJInFrames | read-only | mandatory | Total number of REJ frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.31 | Columncdx6500sdlcsREJOutFrames | read-only | mandatory | Total number of REJ frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.32 | Columncdx6500sdlcsDISCInFrames | read-only | mandatory | Total number of DISC frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.33 | Columncdx6500sdlcsDISCOutFrames | read-only | mandatory | Total number of DISC frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.34 | Columncdx6500sdlcsRDInFrames | read-only | mandatory | Total number of RD frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.35 | Columncdx6500sdlcsRDOutFrames | read-only | mandatory | Total number of RD frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.36 | Columncdx6500sdlcsFRMRInFrames | read-only | mandatory | Total number of FRMR frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.37 | Columncdx6500sdlcsFRMROutFrames | read-only | mandatory | Total number of FRMR frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.38 | Columncdx6500sdlcsUPInFrames | read-only | mandatory | Total number of UP frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.39 | Columncdx6500sdlcsUPOutFrames | read-only | mandatory | Total number of UP frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.40 | Columncdx6500sdlcsTESTInFrames | read-only | mandatory | Total number of TEST frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.41 | Columncdx6500sdlcsTESTOutFrames | read-only | mandatory | Total number of TEST frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.42 | Columncdx6500sdlcsQSMInFrames | read-only | mandatory | Total number of QSM packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.43 | Columncdx6500sdlcsQSMOutFrames | read-only | mandatory | Total number of QSM packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.44 | Columncdx6500sdlcsQUAInFrames | read-only | mandatory | Total number of QUA packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.45 | Columncdx6500sdlcsQUAOutFrames | read-only | mandatory | Total number of QUA packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.46 | Columncdx6500sdlcsQRDInFrames | read-only | mandatory | Total number of QRD packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.47 | Columncdx6500sdlcsQRDOutFrames | read-only | mandatory | Total number of QRD packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.48 | Columncdx6500sdlcsQFRMRInFrames | read-only | mandatory | Total number of QFRMR packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.49 | Columncdx6500sdlcsQFRMROutFrames | read-only | mandatory | Total number of QFRMR packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.50 | Columncdx6500sdlcsQXIDInFrames | read-only | mandatory | Total number of QXID packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.51 | Columncdx6500sdlcsQXIDOutFrames | read-only | mandatory | Total number of QXID packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.52 | Columncdx6500sdlcsQDCInFrames | read-only | mandatory | Total number of QDC packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.53 | Columncdx6500sdlcsQDCOutFrames | read-only | mandatory | Total number of QDC packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.54 | Columncdx6500sdlcsQDMInFrames | read-only | mandatory | Total number of QDM packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.55 | Columncdx6500sdlcsQDMOutFrames | read-only | mandatory | Total number of QDM packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.56 | Columncdx6500sdlcsQTESTInFrames | read-only | mandatory | Total number of QTEST packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.57 | Columncdx6500sdlcsQTESTOutFrames | read-only | mandatory | Total number of QTEST packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.58 | Columncdx6500sdlcsQSSInFrames | read-only | mandatory | Total number of QSS packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.59 | Columncdx6500sdlcsQSSOutFrames | read-only | mandatory | Total number of QSS packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.60 | Columncdx6500sdlcsQRSInFrames | read-only | mandatory | Total number of QRS packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.61 | Columncdx6500sdlcsQRSOutFrames | read-only | mandatory | Total number of QRS packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.62 | Columncdx6500sdlcsXIDNullInFrames | read-only | mandatory | Total number of XID Null frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.63 | Columncdx6500sdlcsXIDNullOutFrames | read-only | mandatory | Total number of XID Null frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.64 | Columncdx6500sdlcsXID0InFrames | read-only | mandatory | Total number of XID Type 0 frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.65 | Columncdx6500sdlcsXID0OutFrames | read-only | mandatory | Total number of XID Type 0 frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.66 | Columncdx6500sdlcsXID1InFrames | read-only | mandatory | Total number of XID Type 1 frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.67 | Columncdx6500sdlcsXID1OutFrames | read-only | mandatory | Total number of XID Type 1 frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.68 | Columncdx6500sdlcsXID3InFrames | read-only | mandatory | Total number of XID Type 3 frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.69 | Columncdx6500sdlcsXID3OutFrames | read-only | mandatory | Total number of XID Type 3 frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.70 | Columncdx6500sdlcsVSNumber | read-only | mandatory | Next VS seuqunce number this station expects. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.71 | Columncdx6500sdlcsVRNumber | read-only | mandatory | Next VR seuqunce number this station expects. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.72 | Columncdx6500sdlcsNRNumber | read-only | mandatory | Next NR seuqunce number this station expects. |
| 1.3.6.1.4.1.449.2.1.3.1.3.4.1.73 | Columncdx6500sdlcsNSNumber | read-only | mandatory | Next NS seuqunce number this station expects. |
| 1.3.6.1.4.1.449.2.1.4 | Nodecdx6500Controls | |||
| 1.3.6.1.4.1.449.2.1.4.5 | Nodecdx6500ContSDLC | |||
| 1.3.6.1.4.1.449.2.1.4.5.1 | Tablecdx6500ContSDLCStationTable | not-accessible | mandatory | All of the control parameters relevant to the SDLC Station table. |
| 1.3.6.1.4.1.449.2.1.4.5.1.1 | Rowcdx6500ContSDLCStationEntry | not-accessible | mandatory | A row of SDLC Station Control parameters. |
| 1.3.6.1.4.1.449.2.1.4.5.1.1.1 | Columncdx6500sdlcsContPortNum | not-accessible | mandatory | Refers to the physical port number. |
| 1.3.6.1.4.1.449.2.1.4.5.1.1.2 | Columncdx6500sdlcsContStationNum | not-accessible | mandatory | Station reference number. |
| 1.3.6.1.4.1.449.2.1.4.5.1.1.3 | Columncdx6500sdlcsContBootStation | write-only | mandatory | Boots the specified SDLC station. boot - Boot Station noBoot - Do not boot Station |
| 1.3.6.1.4.1.449.2.1.4.5.1.1.4 | Columncdx6500sdlcsContDisableStation | write-only | mandatory | Disables the specified SDLC station. disable - Disable Station. noDisable - Do not disable Station. |
| 1.3.6.1.4.1.449.2.1.4.5.1.1.5 | Columncdx6500sdlcsContEnableStation | write-only | mandatory | Enables the specified SDLC station. enable - Enable Station. noEnable - Not not enable Station. |
| 1.3.6.1.4.1.449.2.1.4.5.1.1.6 | Columncdx6500sdlcsContBusyOutStation | write-only | deprecated | This operation is no longer supported. Busy out the specified SDLC station. busyOut - Busyout Station. noBusyOut - Do not busyout Station. |
| 1.3.6.1.4.1.449.2.1.4.5.1.1.7 | Columncdx6500sdlcsContResetStnStats | write-only | mandatory | Resets statistics for the specified SDLC station reset - Reset Station Statistics noReset - Do not reset Station Statistics |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Counter16 | INTEGER (0..65535) | ||
| DisplayString | OCTET STRING |