SDSL-STATS-MIB
61 objects
This module contains definitions for SDSL Ports Stats.
Imported Objects
| IF-MIB | ifIndex |
| NNCGNI0001-SMI | nncExtensions |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.123.3.64 | IdentitynncSdslStatistics | This module contains definitions for SDSL Ports Stats. | ||
| 1.3.6.1.4.1.123.3.64.1 | NodenncSdslStatisticsObjects | |||
| 1.3.6.1.4.1.123.3.64.1.1 | TablenncSdslLineStatusTable | not-accessible | current | Table that contains the Status of all SDSL Lines. |
| 1.3.6.1.4.1.123.3.64.1.1.1 | RownncSdslLineStatusEntry | not-accessible | current | The Status of an SDSL Line. |
| 1.3.6.1.4.1.123.3.64.1.1.1.1 | ColumnnncSdslLineStatus | read-only | current | Status indicates current state of the line. Unknown 0 Operational 1 Near End Loss Of Cell Delineation 2 Near End Loss Of Signal 3 Near End Loss Of Power 34 |
| 1.3.6.1.4.1.123.3.64.1.2 | TablenncSdslNearEndRawTable | not-accessible | current | Table that contains the Near End RAW Stats of all SDSL Ports. |
| 1.3.6.1.4.1.123.3.64.1.2.1 | RownncSdslNearEndRawEntry | not-accessible | current | The Near End Raw Stats of an SDSL Port. |
| 1.3.6.1.4.1.123.3.64.1.2.1.1 | ColumnnncSdslNearEndRawLOS | read-only | current | Count of the number of Loss of Signal failures since system reset. |
| 1.3.6.1.4.1.123.3.64.1.2.1.2 | ColumnnncSdslNearEndRawLowNM | read-only | current | Count of the number of Low Noise Margin failures since system reset. |
| 1.3.6.1.4.1.123.3.64.1.2.1.3 | ColumnnncSdslNearEndRawLPR | read-only | current | Count of the number of Loss of Power failures since system reset. |
| 1.3.6.1.4.1.123.3.64.1.2.1.4 | ColumnnncSdslNearEndRawLOCD | read-only | current | Count of the number of Loss of Cell Delineation failures since system reset. |
| 1.3.6.1.4.1.123.3.64.1.2.1.5 | ColumnnncSdslNearEndRawCRCError | read-only | current | Count of the number of CRC Errors since system reset. |
| 1.3.6.1.4.1.123.3.64.1.3 | TablenncSdslNearEndCurr15MinTable | not-accessible | current | Table that contains the Near End 15 minutes current Stats of all SDSL Ports. |
| 1.3.6.1.4.1.123.3.64.1.3.1 | RownncSdslNearEndCurr15MinEntry | not-accessible | current | The Near End 15 minutes current Stats of an SDSL Port. |
| 1.3.6.1.4.1.123.3.64.1.3.1.1 | ColumnnncSdslNearEndCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. A full interval is 900 seconds. |
| 1.3.6.1.4.1.123.3.64.1.3.1.2 | ColumnnncSdslNearEndCurr15MinLOSS | read-only | current | Count of the number of seconds in Loss of Signal status not due to a Loss of Power in the current 15 minutes interval. |
| 1.3.6.1.4.1.123.3.64.1.3.1.3 | ColumnnncSdslNearEndCurr15MinLOSWS | read-only | current | Count of the number of seconds in Loss of Synch Word status not followed by a Loss of Signal in the current 15 minutes interval. |
| 1.3.6.1.4.1.123.3.64.1.3.1.4 | ColumnnncSdslNearEndCurr15MinLowNMS | read-only | current | Count of the number of seconds in Low Noise Margin status in the current 15 minutes interval. |
| 1.3.6.1.4.1.123.3.64.1.3.1.5 | ColumnnncSdslNearEndCurr15MinLPRS | read-only | current | Count of the number of seconds in Loss of Power status in the current 15 minutes interval. |
| 1.3.6.1.4.1.123.3.64.1.3.1.6 | ColumnnncSdslNearEndCurr15MinErrS | read-only | current | Count of Errored Seconds in the current 15 minutes interval. The errored second parameter is a count of one-second intervals containing one or more of the anom… |
| 1.3.6.1.4.1.123.3.64.1.4 | TablenncSdslNearEndCurr1DayTable | not-accessible | current | Table that contains the Near End 1 Day current Stats of all SDSL Ports. |
| 1.3.6.1.4.1.123.3.64.1.4.1 | RownncSdslNearEndCurr1DayEntry | not-accessible | current | The Near End 1 Day current Stats of an SDSL Port. |
| 1.3.6.1.4.1.123.3.64.1.4.1.1 | ColumnnncSdslNearEndCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapses since the beginning of the current 1 Day interval. |
| 1.3.6.1.4.1.123.3.64.1.4.1.2 | ColumnnncSdslNearEndCurr1DayLOSS | read-only | current | Count of the number of seconds in Loss of Signal status not due to a Loss of Power during the current day. |
| 1.3.6.1.4.1.123.3.64.1.4.1.3 | ColumnnncSdslNearEndCurr1DayLOSWS | read-only | current | Count of the number of seconds in Loss of Synch Word status not followed by a Loss of Signal during the current day. |
| 1.3.6.1.4.1.123.3.64.1.4.1.4 | ColumnnncSdslNearEndCurr1DayLowNMS | read-only | current | Count of the number of seconds in Low Noise Margin status during the current day. |
| 1.3.6.1.4.1.123.3.64.1.4.1.5 | ColumnnncSdslNearEndCurr1DayLPRS | read-only | current | Count of the number of seconds in Loss of Power status during the current day. |
| 1.3.6.1.4.1.123.3.64.1.4.1.6 | ColumnnncSdslNearEndCurr1DayErrS | read-only | current | Count of Errored Seconds during the current day. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or def… |
| 1.3.6.1.4.1.123.3.64.1.5 | TablenncSdslNearEndPrev1DayTable | not-accessible | current | Table that contains the Near End 1 DAY PREVIOUS Stats of all SDSL Ports. |
| 1.3.6.1.4.1.123.3.64.1.5.1 | RownncSdslNearEndPrev1DayEntry | not-accessible | current | The Near End 1 Day PREVIOUS Stats of an SDSL Port. |
| 1.3.6.1.4.1.123.3.64.1.5.1.1 | ColumnnncSdslNearEndPrev1DayMoniSecs | read-only | current | The time in the PREVIOUS 1-day interval over which the performance monitoring information is actually counted. This value will normally be the same as the tota… |
| 1.3.6.1.4.1.123.3.64.1.5.1.2 | ColumnnncSdslNearEndPrev1DayLOSS | read-only | current | Count of the number of seconds in Loss of Signal status not due to a Loss of Power within the most recent PREVIOUS 1 day period. |
| 1.3.6.1.4.1.123.3.64.1.5.1.3 | ColumnnncSdslNearEndPrev1DayLOSWS | read-only | current | Count of the number of seconds in Loss of Synch Word status not followed by a Loss of Signal within the most recent PREVIOUS 1 day period. |
| 1.3.6.1.4.1.123.3.64.1.5.1.4 | ColumnnncSdslNearEndPrev1DayLowNMS | read-only | current | Count of the number of seconds in Low Noise Margin status within the most recent PREVIOUS 1 day period. |
| 1.3.6.1.4.1.123.3.64.1.5.1.5 | ColumnnncSdslNearEndPrev1DayLPRS | read-only | current | Count of the number of seconds in Loss of Power status within the most recent PREVIOUS 1 day period. |
| 1.3.6.1.4.1.123.3.64.1.5.1.6 | ColumnnncSdslNearEndPrev1DayErrS | read-only | current | Count of Errored Seconds within the most recent PREVIOUS 1 day period. The errored second parameter is a count of one-second intervals containing one or more o… |
| 1.3.6.1.4.1.123.3.64.1.5.1.7 | ColumnnncSdslNearEndPrev1DayValidData | read-only | current | This variable indicates if there is valid data for this interval. |
| 1.3.6.1.4.1.123.3.64.1.6 | TablenncSdslFarEndAllTable | not-accessible | current | Table that contains ALL the Far End Stats of all SDSL Ports. |
| 1.3.6.1.4.1.123.3.64.1.6.1 | RownncSdslFarEndAllEntry | not-accessible | current | ALL the Far End Stats of an SDSL Port. |
| 1.3.6.1.4.1.123.3.64.1.6.1.1 | ColumnnncSdslFarEndRawLOCD | read-only | current | Count of the number of Loss of Cell Delineation failures since system reset. |
| 1.3.6.1.4.1.123.3.64.1.6.1.2 | ColumnnncSdslFarEndCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. A full interval is 900 seconds. |
| 1.3.6.1.4.1.123.3.64.1.6.1.3 | ColumnnncSdslFarEndCurr15MinErrS | read-only | current | Count of Errored Seconds in the current 15 minutes interval. The errored second parameter is a count of one-second intervals containing one or more of the anom… |
| 1.3.6.1.4.1.123.3.64.1.6.1.4 | ColumnnncSdslFarEndCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapses since the beginning of the current 1 Day interval. |
| 1.3.6.1.4.1.123.3.64.1.6.1.5 | ColumnnncSdslFarEndCurr1DayErrS | read-only | current | Count of Errored Seconds in the current 15 minutes interval. The errored second parameter is a count of one-second intervals containing one or more of the anom… |
| 1.3.6.1.4.1.123.3.64.1.6.1.6 | ColumnnncSdslFarEndPrev1DayMoniSecs | read-only | current | The time in the PREVIOUS 1-day interval over which the performance monitoring information is actually counted. This value will normally be the same as the tota… |
| 1.3.6.1.4.1.123.3.64.1.6.1.7 | ColumnnncSdslFarEndPrev1DayErrS | read-only | current | Count of Errored Seconds within the most recent PREVIOUS 1 day period. The errored second parameter is a count of one-second intervals containing one or more o… |
| 1.3.6.1.4.1.123.3.64.1.6.1.8 | ColumnnncSdslFarEndPrev1DayValidData | read-only | current | This variable indicates if there is valid data for this interval. |
| 1.3.6.1.4.1.123.3.64.1.7 | TablenncSdslNearEndIntTable | not-accessible | current | Table that contains the Near End 15 Minutes Intervals Stats of all SDSL Ports. |
| 1.3.6.1.4.1.123.3.64.1.7.1 | RownncSdslNearEndIntEntry | not-accessible | current | One interval of Near End Stats of an SDSL Port. |
| 1.3.6.1.4.1.123.3.64.1.7.1.1 | ColumnnncSdslNearEndIntNumber | not-accessible | current | Performance Data Interval number. 1 is the the most recent interval; interval 96 is 24 hours ago. Interval 2..96 are optional. |
| 1.3.6.1.4.1.123.3.64.1.7.1.2 | ColumnnncSdslNearEndIntLOSS | read-only | current | Count of seconds in the interval when there was Loss of Signal not due to a Loss of Power. |
| 1.3.6.1.4.1.123.3.64.1.7.1.3 | ColumnnncSdslNearEndIntLOSWS | read-only | current | Count of seconds in the interval when there was Loss of Signal not folloew by Loss of Signal. |
| 1.3.6.1.4.1.123.3.64.1.7.1.4 | ColumnnncSdslNearEndIntLowNMS | read-only | current | Count of seconds in the interval when there was Low Noise Margin. |
| 1.3.6.1.4.1.123.3.64.1.7.1.5 | ColumnnncSdslNearEndIntLPRS | read-only | current | Count of seconds in the interval when there was Loss of Power. |
| 1.3.6.1.4.1.123.3.64.1.7.1.6 | ColumnnncSdslNearEndIntErrS | read-only | current | Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects pr… |
| 1.3.6.1.4.1.123.3.64.1.7.1.7 | ColumnnncSdslNearEndIntValidData | read-only | current | This variable indicates if there is valid data for this interval. |
| 1.3.6.1.4.1.123.3.64.1.8 | TablenncSdslFarEndIntTable | not-accessible | current | Table that contains the Far End 15 Minutes Intervals Stats of all SDSL Ports. |
| 1.3.6.1.4.1.123.3.64.1.8.1 | RownncSdslFarEndIntEntry | not-accessible | current | One interval of Far End Stats of an SDSL Port. |
| 1.3.6.1.4.1.123.3.64.1.8.1.1 | ColumnnncSdslFarEndIntNumber | not-accessible | current | Performance Data Interval number. 1 is the the most recent interval; interval 96 is 24 hours ago. Interval 2..96 are optional. |
| 1.3.6.1.4.1.123.3.64.1.8.1.2 | ColumnnncSdslFarEndIntErrS | read-only | current | Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects pr… |
| 1.3.6.1.4.1.123.3.64.1.8.1.3 | ColumnnncSdslFarEndIntValidData | read-only | current | This variable indicates if there is valid data for this interval. |