SHIVA-AT-MIB
21 objects
No module-level DESCRIPTION found.
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.166.4.2.1 | ScalartRTMPEntryTimeouts | read-only | mandatory | The number of entries which were removed from routing table because the aging algorithm indicated that they were invalid. |
| 1.3.6.1.4.1.166.4.2.2 | ScalartRTMPEntryDeletes | read-only | mandatory | The number of entries which were removed from the routing table for any reason other than aging, for instance, due to a command from a Network Management stati… |
| 1.3.6.1.4.1.166.4.2.3 | ScalartRTMPEntryEqualReplaces | read-only | mandatory | The number of entries whose route was replaced by another route with the same hop count. |
| 1.3.6.1.4.1.166.4.2.4 | ScalartRTMPEntryBetterReplaces | read-only | mandatory | The number of entries whose route was replaced by another route with a lower hop count. |
| 1.3.6.1.4.1.166.4.2.5 | ScalartRTMPEntryAdds | read-only | mandatory | The number of new entries which have been added to the table. |
| 1.3.6.1.4.1.166.4.2.6 | ScalartRTMPZeroCounters | read-write | mandatory | Writing this variable causes all the RTMP variables in this group to be set to zero. |
| 1.3.6.1.4.1.166.4.2.7 | ScalartZIPDeletes | read-only | mandatory | The number of Zones which have been deleted from the Zone Table. |
| 1.3.6.1.4.1.166.4.2.8 | ScalartZIPAdds | read-only | mandatory | The number of Zones which have been added to the Zone Table. |
| 1.3.6.1.4.1.166.4.2.9 | ScalartZIPZeroCounters | read-write | mandatory | Writing this variable causes all the ZIP variables in this group to be set to zero. |
| 1.3.6.1.4.1.166.4.2.10 | ScalartAARPClearCache | read-write | mandatory | Writing this variable clears the AARP Cache. |
| 1.3.6.1.4.1.166.4.2.11 | ScalartKIPRoutesValid | read-write | mandatory | This variable can be used to force KIP to reacquire its configuration information. |
| 1.3.6.1.4.1.166.4.2.12 | ScalartNBPDeviceObject | read-only | mandatory | The NBP name used to advertise this device's primary NVE on the LAN interface. |
| 1.3.6.1.4.1.166.4.2.13 | ScalartNBPDeviceType | read-only | mandatory | The NBP type used to advertise this device's primary NVE on the LAN interface. |
| 1.3.6.1.4.1.166.4.2.14 | ScalartNBPDeviceZone | read-only | mandatory | The zone in which this device registers its primary NVE on the LAN interface. |
| 1.3.6.1.4.1.166.4.2.15 | ScalartNBPDeviceSocket | read-only | mandatory | The DDP socket number used by the device in NBP Responses for its primary NVE registered on the LAN interface. |
| 1.3.6.1.4.1.166.4.2.16 | ScalartATDialinNetwork | read-only | mandatory | The AppleTalk network number in which AppleTalk dialin users appear. When tATDialInPacketDeliveryMode is routing(1) this value corresponds to the configured di… |
| 1.3.6.1.4.1.166.4.2.17 | ScalartATDialinZone | read-only | mandatory | The zone with which tATDialinNetwork is associated. |
| 1.3.6.1.4.1.166.4.2.18 | ScalartATRoutingMode | read-only | mandatory | The routing behavior of this device for AppleTalk. If the device is configured as conformingRouter(1) or seedRouter(2) then it will behave as an AppleTalk rout… |
| 1.3.6.1.4.1.166.4.2.19 | ScalartATDialinPacketDeliveryMode | read-only | mandatory | The method used to deliver packets to and from Appletalk dialin clients. If the device is configured as routing(1) it will use routing tables to deliver packet… |
| 1.3.6.1.4.1.166.4.2.20 | ScalartRTMPEntryTotal | read-only | mandatory | The number of network (range) entries in the device's RTMP Table. This value is not cleared by the tRTMPZeroCounters switch. |
| 1.3.6.1.4.1.166.4.2.21 | ScalartZoneTotal | read-only | mandatory | The number of AppleTalk zones for which the device has learned one or more associated nets or net ranges. This value is not cleared by the tZIPZeroCounters swi… |