SIEMENS-MULTIPATH-MIB
58 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.231 | Nodesni | |||
| 1.3.6.1.4.1.231.2 | NodesniProductMibs | |||
| 1.3.6.1.4.1.231.2.10 | NodesniExtensions | |||
| 1.3.6.1.4.1.231.2.10.2 | NodesniServerMgmt | |||
| 1.3.6.1.4.1.231.2.10.2.2 | NodesniCommon | |||
| 1.3.6.1.4.1.231.2.10.2.2.7 | NodesieMultiPath | |||
| 1.3.6.1.4.1.231.2.10.2.2.7.1 | NodesieMPAgentInfo | |||
| 1.3.6.1.4.1.231.2.10.2.2.7.1.1 | ScalarsieMPAgentId | read-only | mandatory | MultiPath SNMP agent ID string |
| 1.3.6.1.4.1.231.2.10.2.2.7.1.2 | ScalarsieMPAgentCompany | read-only | mandatory | MultiPath SNMP agent company string |
| 1.3.6.1.4.1.231.2.10.2.2.7.1.3 | ScalarsieMPAgentVersion | read-only | mandatory | MultiPath SNMP agent version string |
| 1.3.6.1.4.1.231.2.10.2.2.7.1.4 | ScalarsieMPAgentBuild | read-only | mandatory | MultiPath SNMP agent build date and time string |
| 1.3.6.1.4.1.231.2.10.2.2.7.2 | NodesieMPState | |||
| 1.3.6.1.4.1.231.2.10.2.2.7.2.1 | ScalarsieMPLastDate | read-only | mandatory | Date of last recent reconfiguration in time_t (seconds since 1/1/1970 00:00:00) |
| 1.3.6.1.4.1.231.2.10.2.2.7.2.2 | ScalarsieMPCurrentState | read-only | mandatory | This reflects the overall state of the driver, agent and the underlying ports. Possible values are: OK everything is fine DEGRADED there was an event from the … |
| 1.3.6.1.4.1.231.2.10.2.2.7.3 | NodesieMPContainer | |||
| 1.3.6.1.4.1.231.2.10.2.2.7.3.1 | TablesieMPGroupTable | not-accessible | mandatory | Table of available MultiPath groups |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.1.1 | RowsieMPGroup | not-accessible | mandatory | Entry in table of MultiPath groups |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.1.1.1 | ColumnsieMPGroupID | read-only | mandatory | A unique value for each group, starts at 0 and remains unchanged from one re-initialization of the agent to the next |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.1.1.2 | ColumnsieMPGroupCommand | read-write | mandatory | These are the possible commands a frontend can send to a MultiPath group. ENABLE-LOAD-BALANCING I/Os can use all available ports of a MultiPath group DISABLE-L… |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.1.1.3 | ColumnsieMPGroupLoadBalancingStatus | read-only | mandatory | Show wether load balancing is enabled or disabled |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.1.1.4 | ColumnsieMPGroupAutorecoverStatus | read-only | mandatory | Show wether autorecover is enabled or disabled |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2 | TablesieMPPortTable | not-accessible | mandatory | Table of available ports |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1 | RowsieMPPort | not-accessible | mandatory | Entry in table of ports |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.1 | ColumnsieMPPortID | read-only | mandatory | A unique value for each port, starts at 0 and remains unchanged from one re-initialization of the agent to the next |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.2 | ColumnsieMPParentGroup | read-only | mandatory | sieMPGroupID of the group where port is member |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.3 | ColumnsieMPPortStatus | read-only | mandatory | These are the possible states a port can be in UNKNOWN cannot get status information for this port UNUSED this port cannot be used for MultiPath (user defined)… |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.4 | ColumnsieMPPortCommand | read-write | mandatory | These are the possible commands a frontend can send to a port. ENABLE when a port was disabled by user request - enable it DISABLE disable a port CLEAR-ERROR c… |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.5 | ColumnsieMPPortPciSlot | read-only | mandatory | Physical PCI slot of port |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.6 | ColumnsieMPPortHAType | read-only | mandatory | Vendor, name, type of hostadaptor |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.7 | ColumnsieMPPortTargetID | read-only | mandatory | SCSI Target ID of port |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.8 | ColumnsieMPPortLastErrorNumber | read-only | mandatory | Last error number for port |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.9 | ColumnsieMPPortLastErrorTarget | read-only | mandatory | Last target number where error occured for port |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.10 | ColumnsieMPPortLastErrorLun | read-only | mandatory | Last lun number where error occured for port |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.2.1.11 | ColumnsieMPPortLastErrorPath | read-only | mandatory | Last path where error occured for port |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.3 | TablesieMPLunTable | not-accessible | mandatory | Table of available luns |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.3.1 | RowsieMPLun | not-accessible | mandatory | Entry in table of luns |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.1 | ColumnsieMPLunID | read-only | mandatory | A unique value for each lun, starts at 0 and remains unchanged from one re-initialization of the agent to the next |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.2 | ColumnsieMPLunParentPort | read-only | mandatory | sieMPPortID of the group where lun is member |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.3 | ColumnsieMPLunTargetNo | read-only | mandatory | SCSI Target ID of lun |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.4 | ColumnsieMPLunLunNo | read-only | mandatory | SCSI LUN of lun |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.5 | ColumnsieMPLunInquiry | read-only | mandatory | Inquiry string containing serial number, etc. for lun |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.6 | ColumnsieMPOSDeviceName | read-only | mandatory | The operating system's name for this device (e.g. Windows NT: disk0). |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.7 | ColumnsieMPLunType | read-only | mandatory | SCSI LUN type |
| 1.3.6.1.4.1.231.2.10.2.2.7.3.3.1.8 | ColumnsieMPLunClaimed | read-only | mandatory | SCSI LUN claimed status |
| 1.3.6.1.4.1.231.2.10.2.2.7.10 | NodesieMPTrapInfo | |||
| 1.3.6.1.4.1.231.2.10.2.2.7.10.1 | ScalarsieMPTrapServerName | not-accessible | mandatory | Name of the server where the trap occured |
| 1.3.6.1.4.1.231.2.10.2.2.7.10.2 | ScalarsieMPTrapTime | not-accessible | mandatory | Time the trap occured (in seconds since 1/1/1970 00:00:00) |
| 1.3.6.1.4.1.231.2.10.2.2.7.10.3 | ScalarsieMPTrapGroupID | not-accessible | mandatory | The MultiPath Group ID where the change occured |
| 1.3.6.1.4.1.231.2.10.2.2.7.10.4 | ScalarsieMPTrapPortID | not-accessible | mandatory | The MultiPath Port ID where the change occured |
| 1.3.6.1.4.1.231.2.10.2.2.7.10.5 | ScalarsieMPTrapTargetID | not-accessible | mandatory | The MultiPath Target ID where the change occured |
| 1.3.6.1.4.1.231.2.10.2.2.7.10.6 | ScalarsieMPTrapLunID | not-accessible | mandatory | The MultiPath Lun ID where the change occured |
| 1.3.6.1.4.1.231.2.10.2.1200 | NodesieMPError | Only one port of the MultiPath group was alive and this one failed. The MultiPath group is not operational anymore. | ||
| 1.3.6.1.4.1.231.2.10.2.1201 | NodesieMPRetry | One active port of a MultiPath group has failed. A retry on another path has been started. | ||
| 1.3.6.1.4.1.231.2.10.2.1202 | NodesieMPActivePortChanged | Trap occurs after the driver has activated a port as requested by the configuration utility. | ||
| 1.3.6.1.4.1.231.2.10.2.1203 | NodesieMPReconfigured | Trap occurs after the driver has added a port to a MultiPath group (if a matching port was found) or removed a port from a MultiPath group. The action was requ… | ||
| 1.3.6.1.4.1.231.2.10.2.1204 | NodesieMPStatusChanged | Trap occurs after the driver has changed the behavior of a MultiPath group. Autorecovery was turned or off, loadbalancing was turned on or off or one port was … | ||
| 1.3.6.1.4.1.231.2.10.2.1205 | NodesieMPAutoRecovered | Trap occurs when the driver has detected that a port which was in status error is accessible again. | ||
| 1.3.6.1.4.1.231.2.10.2.1206 | NodesieMPErrorCleared | Trap occurs after the driver has cleared the error status for a port from a MultiPath group as requested by the configuration utility. |