MIB Viewer

Search, upload, browse, or download from a database of over 11,000 SNMP MIBs. MIB Viewer lets you look up any MIB object by name, OID, or number, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

SILVERPEAK-MGMT-MIB

33 objects

This module defines the management variables used to manage and monitor appliance status.

Imported Objects

SILVERPEAK-SMI	silverpeakMgmt silverpeakNotifications
SILVERPEAK-TC	SilverpeakAlarmSeverity SilverpeakSeqNum SilverpeakYesNo
SNMPv2-CONF	MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI	MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TC	DisplayString

OID	Name	Access	Status	Description
1.3.6.1.4.1.23867.3.1	IdentitysilverpeakMgmtMIB			This module defines the management variables used to manage and monitor appliance status.
1.3.6.1.4.1.23867.3.1.1	NodesilverpeakMgmtMIBObjects
1.3.6.1.4.1.23867.3.1.1.1	NodesilverpeakMgmtMIBScalars
1.3.6.1.4.1.23867.3.1.1.1.1	ScalarspsSystemVersion	read-only	current	System software version string
1.3.6.1.4.1.23867.3.1.1.1.2	ScalarspsProductModel	read-only	current	System product model
1.3.6.1.4.1.23867.3.1.1.1.3	ScalarspsOperStatus	read-only	current	The current operational state of the appliance.
1.3.6.1.4.1.23867.3.1.1.1.4	ScalarspsActiveAlarmCount	read-only	current	The number of active alarm entries in the alarm table - spsActiveAlarmTable, defined under silverpeakMgmtMIBTables subtree.
1.3.6.1.4.1.23867.3.1.1.1.5	ScalarspsSystemUptime	read-only	current	The amount of time in hundredth of a second since this NX was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because …
1.3.6.1.4.1.23867.3.1.1.1.6	ScalarspsSystemSerial	read-only	current	System serial number string
1.3.6.1.4.1.23867.3.1.1.2	NodesilverpeakMgmtMIBTables
1.3.6.1.4.1.23867.3.1.1.2.1	TablespsActiveAlarmTable	not-accessible	current	A list of the active alarm entries. This represents the fault conditions that are still active in the appliance.
1.3.6.1.4.1.23867.3.1.1.2.1.1	RowactiveAlarmEntry	not-accessible	current	The active alarm entries that are still valid system faults.
1.3.6.1.4.1.23867.3.1.1.2.1.1.1	ColumnspsActiveAlarmIndex	not-accessible	current	An index that uniquely identifies an entry in the active alarm table.
1.3.6.1.4.1.23867.3.1.1.2.1.1.2	ColumnspsActiveAlarmSeqNum	read-only	current	The active alarm's sequence number at the time it was generated.
1.3.6.1.4.1.23867.3.1.1.2.1.1.3	ColumnspsActiveAlarmSeverity	read-only	current	The alarm severity for the active alarm.
1.3.6.1.4.1.23867.3.1.1.2.1.1.4	ColumnspsActiveAlarmName	read-only	current	A short name for the active alarm.
1.3.6.1.4.1.23867.3.1.1.2.1.1.5	ColumnspsActiveAlarmDescr	read-only	current	A description for the active alarm.
1.3.6.1.4.1.23867.3.1.1.2.1.1.6	ColumnspsActiveAlarmSource	read-only	current	The source for the active alarm.
1.3.6.1.4.1.23867.3.1.1.2.1.1.7	ColumnspsActiveAlarmType	read-only	current	The alarm type for the active alarm.
1.3.6.1.4.1.23867.3.1.1.2.1.1.8	ColumnspsActiveAlarmAcked	read-only	current	Identifies if the user has acknowledged the alarm.
1.3.6.1.4.1.23867.3.1.1.2.1.1.9	ColumnspsActiveAlarmActive	read-only	current	Identifies if the alarm is currently active.
1.3.6.1.4.1.23867.3.1.1.2.1.1.10	ColumnspsActiveAlarmClearable	read-only	current	Identifies if the user can manually clear the alarm.
1.3.6.1.4.1.23867.3.1.1.2.1.1.11	ColumnspsActiveAlarmLogTime	read-only	current	The value of sysUpTime when the alarm was generated.
1.3.6.1.4.1.23867.3.1.1.2.1.1.12	ColumnspsActiveAlarmServiceAffect	read-only	current	Identifies if the alarm is service affecting.
1.3.6.1.4.1.23867.3.1.1.2.1.1.13	ColumnspsActiveAlarmTypeId	read-only	current
1.3.6.1.4.1.23867.3.1.2	NodesilverpeakMgmtMIBConformance
1.3.6.1.4.1.23867.3.1.2.1	NodesilverpeakMgmtMIBCompliances
1.3.6.1.4.1.23867.3.1.2.1.1	CompliancesilverpeakMgmtCompliance		current	The compliance statement for agents implementing silverpeakMgmtMIB.
1.3.6.1.4.1.23867.3.1.2.2	NodesilverpeakMgmtMIBGroups
1.3.6.1.4.1.23867.3.1.2.2.1	GroupsilverpeakMgmtGroup		current	A collection of objects used to retrieve management information from Silverpeak Systems appliances.
1.3.6.1.4.1.23867.3.1.2.2.3	GroupsilverpeakMgmtNotifyGroup		current	A collection of the Notifications supported in the management MIB.
1.3.6.1.4.1.23867.4.1	NodesilverpeakMgmtMIBNotifications
1.3.6.1.4.1.23867.4.1.1	NotificationspsNotifyAlarm		current	A notification that the system has just generated and alarm.