MIB Viewer

SIP-MIB

78 objects
The MIB module to describe SMDS interfaces objects.
Imported Objects
RFC1213-MIBifIndex mib-2 transmission
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TCTEXTUAL-CONVENTION TimeStamp
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.31Nodesip
1.3.6.1.2.1.10.31.1TablesipL3Tablenot-accessiblecurrentThis table contains SIP L3 parameters and state variables, one entry per SIPL3 interface.
1.3.6.1.2.1.10.31.1.1RowsipL3Entrynot-accessiblecurrentThis list contains SIP L3 parameters and state variables.
1.3.6.1.2.1.10.31.1.1.1ColumnsipL3Indexread-onlycurrentThe value of this object identifies the SIP L3 interface for which this entry contains management information.
1.3.6.1.2.1.10.31.1.1.2ColumnsipL3ReceivedIndividualDAsread-onlydeprecatedThe total number of individually addressed SIP Level 3 PDUs received from the remote system across the SNI. The total includes only unerrored L3PDUs.
1.3.6.1.2.1.10.31.1.1.3ColumnsipL3ReceivedGAsread-onlydeprecatedThe total number of group addressed SIP Level 3 PDUs received from the remote system across the SNI. The total includes only unerrored L3PDUs.
1.3.6.1.2.1.10.31.1.1.4ColumnsipL3UnrecognizedIndividualDAsread-onlydeprecatedThe number of SIP Level 3 PDUs received from the remote system with invalid or unknown individual destination addresses (Destination Address Screening violatio…
1.3.6.1.2.1.10.31.1.1.5ColumnsipL3UnrecognizedGAsread-onlydeprecatedThe number of SIP Level 3 PDUs received from the remote system with invalid or unknown group addresses. (Destination Address Screening violations are not inclu…
1.3.6.1.2.1.10.31.1.1.6ColumnsipL3SentIndividualDAsread-onlydeprecatedThe number of individually addressed SIP Level 3 PDUs that have been sent by this system across the SNI.
1.3.6.1.2.1.10.31.1.1.7ColumnsipL3SentGAsread-onlydeprecatedThe number of group addressed SIP L3PDUs that have been sent by this system across the SNI.
1.3.6.1.2.1.10.31.1.1.8ColumnsipL3Errorsread-onlydeprecatedThe total number of SIP Level 3 PDUs received from the remote system that were discovered to have errors (including protocol processing and bit errors but excl…
1.3.6.1.2.1.10.31.1.1.9ColumnsipL3InvalidSMDSAddressTypesread-onlydeprecatedThe number of SIP Level 3 PDUs received from the remote system that had the Source or Destination Address_Type subfields, (the four most significant bits of th…
1.3.6.1.2.1.10.31.1.1.10ColumnsipL3VersionSupportread-onlycurrentA value which indicates the version(s) of SIP that this interface supports. The value is a sum. This sum initially takes the value zero. For each version, V, t…
1.3.6.1.2.1.10.31.2TablesipL2Tablenot-accessiblecurrentThis table contains SIP L2PDU parameters and state variables, one entry per SIP L2 interface.
1.3.6.1.2.1.10.31.2.1RowsipL2Entrynot-accessiblecurrentThis list contains SIP L2 parameters and state variables.
1.3.6.1.2.1.10.31.2.1.1ColumnsipL2Indexread-onlycurrentThe value of this object identifies the SIP interface for which this entry contains management information.
1.3.6.1.2.1.10.31.2.1.2ColumnsipL2ReceivedCountsread-onlycurrentThe number of SIP Level 2 PDUs received from the remote system across the SNI. The total includes only unerrored L2PDUs.
1.3.6.1.2.1.10.31.2.1.3ColumnsipL2SentCountsread-onlycurrentThe number of SIP Level 2 PDUs that have been sent by this system across the SNI.
1.3.6.1.2.1.10.31.2.1.4ColumnsipL2HcsOrCRCErrorsread-onlycurrentThe number of received SIP Level 2 PDUs that were discovered to have either a Header Check Sequence error or a Payload CRC violation.
1.3.6.1.2.1.10.31.2.1.5ColumnsipL2PayloadLengthErrorsread-onlycurrentThe number of received SIP Level 2 PDUs that had Payload Length errors that fall in the following specifications: - SSM L2_PDU payload length field value less …
1.3.6.1.2.1.10.31.2.1.6ColumnsipL2SequenceNumberErrorsread-onlycurrentThe number of received SIP Level 2 PDUs that had a sequence number within the L2PDU not equal to the expected sequence number of the SMDS SS receive process.
1.3.6.1.2.1.10.31.2.1.7ColumnsipL2MidCurrentlyActiveErrorsread-onlycurrentThe number of received SIP Level 2 PDUs that are BOMs for which an active receive process is already started.
1.3.6.1.2.1.10.31.2.1.8ColumnsipL2BomOrSSMsMIDErrorsread-onlycurrentThe number of received SIP Level 2 PDUs that are SSMs with a MID not equal to zero or are BOMs with MIDs equal to zero.
1.3.6.1.2.1.10.31.2.1.9ColumnsipL2EomsMIDErrorsread-onlycurrentThe number of received SIP Level 2 PDUs that are EOMs for which there is no active receive process for the MID (i.e., the receipt of an EOM which does not corr…
1.3.6.1.2.1.10.31.3NodesipPLCP
1.3.6.1.2.1.10.31.3.1TablesipDS1PLCPTablenot-accessiblecurrentThis table contains SIP DS1 PLCP parameters and state variables, one entry per SIP port.
1.3.6.1.2.1.10.31.3.1.1RowsipDS1PLCPEntrynot-accessiblecurrentThis list contains SIP DS1 PLCP parameters and state variables.
1.3.6.1.2.1.10.31.3.1.1.1ColumnsipDS1PLCPIndexread-onlycurrentThe value of this object identifies the interface for which this entry contains management information.
1.3.6.1.2.1.10.31.3.1.1.2ColumnsipDS1PLCPSEFSsread-onlycurrentA DS1 Severely Errored Framing Second (SEFS) is a count of one-second intervals containing one or more SEF events. A Severely Errored Framing (SEF) event is de…
1.3.6.1.2.1.10.31.3.1.1.3ColumnsipDS1PLCPAlarmStateread-onlycurrentThis variable indicates if there is an alarm present for the DS1 PLCP. The value receivedFarEndAlarm means that the DS1 PLCP has received an incoming Yellow Si…
1.3.6.1.2.1.10.31.3.1.1.4ColumnsipDS1PLCPUASsread-onlycurrentThe counter associated with the number of Unavailable Seconds, as defined by TR-TSV-000773, encountered by the PLCP.
1.3.6.1.2.1.10.31.3.2TablesipDS3PLCPTablenot-accessiblecurrentThis table contains SIP DS3 PLCP parameters and state variables, one entry per SIP port.
1.3.6.1.2.1.10.31.3.2.1RowsipDS3PLCPEntrynot-accessiblecurrentThis list contains SIP DS3 PLCP parameters and state variables.
1.3.6.1.2.1.10.31.3.2.1.1ColumnsipDS3PLCPIndexread-onlycurrentThe value of this object identifies the interface for which this entry contains management information.
1.3.6.1.2.1.10.31.3.2.1.2ColumnsipDS3PLCPSEFSsread-onlycurrentA DS3 Severely Errored Framing Second (SEFS) is a count of one-second intervals containing one or more SEF events. A Severely Errored Framing (SEF) event is de…
1.3.6.1.2.1.10.31.3.2.1.3ColumnsipDS3PLCPAlarmStateread-onlycurrentThis variable indicates if there is an alarm present for the DS3 PLCP. The value receivedFarEndAlarm means that the DS3 PLCP has received an incoming Yellow Si…
1.3.6.1.2.1.10.31.3.2.1.4ColumnsipDS3PLCPUASsread-onlycurrentThe counter associated with the number of Unavailable Seconds, as defined by TR-TSV-000773, encountered by the PLCP.
1.3.6.1.2.1.10.31.4NodesmdsApplications
1.3.6.1.2.1.10.31.4.1NodeipOverSMDS
1.3.6.1.2.1.10.31.4.1.1TableipOverSMDSTablenot-accessiblecurrentThe table of addressing information relevant to this entity's IP addresses.
1.3.6.1.2.1.10.31.4.1.1.1RowipOverSMDSEntrynot-accessiblecurrentThe addressing information for one of this entity's IP addresses.
1.3.6.1.2.1.10.31.4.1.1.1.1ColumnipOverSMDSIndexread-onlycurrentThe value of this object identifies the interface for which this entry contains management information.
1.3.6.1.2.1.10.31.4.1.1.1.2ColumnipOverSMDSAddressread-onlycurrentThe IP address to which this entry's addressing information pertains.
1.3.6.1.2.1.10.31.4.1.1.1.3ColumnipOverSMDSHAread-onlycurrentThe SMDS Individual address of the IP station.
1.3.6.1.2.1.10.31.4.1.1.1.4ColumnipOverSMDSLISGAread-onlycurrentThe SMDS Group Address that has been configured to identify the SMDS Subscriber-Network Interfaces (SNIs) of all members of the Logical IP Subnetwork (LIS) con…
1.3.6.1.2.1.10.31.4.1.1.1.5ColumnipOverSMDSARPReqread-onlycurrentThe SMDS address (individual or group) to which ARP Requests are to be sent.
1.3.6.1.2.1.10.31.5NodesmdsCarrierSelection
1.3.6.1.2.1.10.31.6NodesipErrorLog
1.3.6.1.2.1.10.31.6.1TablesipL3PDUErrorTablenot-accessiblecurrentA table that contains the latest occurrence of the following syntactical SIP L3PDU errors: - Destination Address Field Format Error, The following pertains to …
1.3.6.1.2.1.10.31.6.1.1RowsipL3PDUErrorEntrynot-accessiblecurrentAn entry in the service disagreement table.
1.3.6.1.2.1.10.31.6.1.1.1ColumnsipL3PDUErrorIndexread-onlycurrentThe value of this object identifies the interface for which this entry contains management information.
1.3.6.1.2.1.10.31.6.1.1.2ColumnsipL3PDUErrorTyperead-onlycurrentThe type of error.
1.3.6.1.2.1.10.31.6.1.1.3ColumnsipL3PDUErrorSAread-onlycurrentA rejected SMDS source address.
1.3.6.1.2.1.10.31.6.1.1.4ColumnsipL3PDUErrorDAread-onlycurrentA rejected SMDS destination address.
1.3.6.1.2.1.10.31.6.1.1.5ColumnsipL3PDUErrorTimeStampread-onlycurrentThe timestamp for the service disagreement. The timestamp contains the value of sysUpTime at the latest occurrence of this type of service disagreement. See te…
1.3.6.1.2.1.36IdentitysipMIBThe MIB module to describe SMDS interfaces objects.
1.3.6.1.2.1.36.1NodesipMIBObjects
1.3.6.1.2.1.36.1.1TablesipDxiTablenot-accessiblecurrentThe DXI table.
1.3.6.1.2.1.36.1.1.1RowsipDxiEntrynot-accessiblecurrentAn entry in the DXI table.
1.3.6.1.2.1.36.1.1.1.1ColumnsipDxiCrcread-onlycurrentThe value of this object indicates the type of Frame Checksum used by DXI. Current choices include CCITT CRC16 or CRC32.
1.3.6.1.2.1.36.1.1.1.2ColumnsipDxiOutDiscardsread-onlycurrentThe number of outbound frames discarded because of congestion.
1.3.6.1.2.1.36.1.1.1.3ColumnsipDxiInErrorsread-onlycurrentThe number of inbound frames discarded because of errors such as frame checksum (CRC) violations, non-integral number of octets, address and control field viol…
1.3.6.1.2.1.36.1.1.1.4ColumnsipDxiInAbortsread-onlycurrentThe number of inbound frames discarded because of an abort bit sequence (1111111) received before closing flag.
1.3.6.1.2.1.36.1.1.1.5ColumnsipDxiInTestFramesread-onlycurrentThe number of unerrored, inbound Test frames received (generally as part of Heart Beat Poll procedure).
1.3.6.1.2.1.36.1.1.1.6ColumnsipDxiOutTestFramesread-onlycurrentThe number of unerrored, outbound Test frames sent (generally as part of Heart Beat Poll procedure).
1.3.6.1.2.1.36.1.1.1.7ColumnsipDxiHbpNoAcksread-onlycurrentThe number of Heart Beat Poll (HBP) No Ack timeouts.
1.3.6.1.2.1.36.2NodesmdsConformance
1.3.6.1.2.1.36.2.1NodesmdsGroups
1.3.6.1.2.1.36.2.1.1GroupsipLevel3StuffcurrentA collection of objects providing information applicable to all SMDS interfaces.
1.3.6.1.2.1.36.2.1.2GroupsipLevel2StuffcurrentA collection of objects providing information specific to interfaces using the SIP Level 2.
1.3.6.1.2.1.36.2.1.3GroupsipDS1PLCPStuffcurrentA collection of objects providing information specific to interfaces using the DS1 PLCP.
1.3.6.1.2.1.36.2.1.4GroupsipDS3PLCPStuffcurrentA collection of objects providing information specific to interfaces using the DS3 PLCP.
1.3.6.1.2.1.36.2.1.5GroupsipIPApplicationsStuffcurrentA collection of objects providing information for running IP over SMDS.
1.3.6.1.2.1.36.2.1.6GroupsipDxiStuffcurrentA collection of objects providing information specific to interfaces using the DXI protocol.
1.3.6.1.2.1.36.2.2NodesmdsCompliances
1.3.6.1.2.1.36.2.2.1CompliancesmdsCompliancecurrentThe compliance statement for SMDS interfaces.
Type Definitions
NameSyntaxStatusDescription
IfIndexInteger32currentThe value of this object identifies the interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in RFC 1213, …
SMDSAddressOCTET STRING (SIZE (8))currentThe 60-bit SMDS address, preceded by 4 bits with the following values: 1100 when representing an individual address 1110 when representing a group address.
MIB Viewer