SIXNET-MIB
869 objects
Enterprise MIB for SIXNET products
Imported Objects
| BRIDGE-MIB | BridgeId dot1dStpPortEntry MacAddress Timeout |
| IEEE8021-PAE-MIB | dot1xAuthConfigEntry |
| IF-MIB | ifIndex InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | PortList VlanIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.259.10.1.27.1.5.6.6.1.2 | Identitysixnet | Enterprise MIB for SIXNET products | ||
| 1.3.6.1.4.1.259.10.1.27.1.5.6.6.1.3 | ScalarmstInstanceEditVlansMap2k | read-create | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.10.1.27.1.5.6.6.1.4 | ScalarmstInstanceEditVlansMap3k | read-create | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.10.1.27.1.5.6.6.1.5 | ScalarmstInstanceEditVlansMap4k | read-create | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.10.1.27.1.5.6.6.1.6 | ScalarmstInstanceEditRemainingHops | read-only | current | The remaining hop count for this MST instance. |
| 1.3.6.1.4.1.259.10.1.27.1.5.6.7 | TablemstInstanceOperTable | not-accessible | current | The Multiple Spanning Tree region instance vlan mapped table. |
| 1.3.6.1.4.1.259.10.1.27.1.5.6.7.1 | RowmstInstanceOperEntry | not-accessible | current | A conceptual row containing the status of the MSTP instance. |
| 1.3.6.1.4.1.259.10.1.27.1.5.6.7.1.1 | ColumnmstInstanceOperIndex | not-accessible | current | An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. |
| 1.3.6.1.4.1.259.10.1.27.1.5.6.7.1.2 | ColumnmstInstanceOperVlansMap | read-only | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through … |
| 1.3.6.1.4.1.259.10.1.27.1.5.6.7.1.3 | ColumnmstInstanceOperVlansMap2k | read-only | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.10.1.27.1.5.6.7.1.4 | ColumnmstInstanceOperVlansMap3k | read-only | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.10.1.27.1.5.6.7.1.5 | ColumnmstInstanceOperVlansMap4k | read-only | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.259.10.1.27.1.16.1 | NoderateLimitMgt | |||
| 1.3.6.1.4.1.259.10.1.27.1.16.1.2 | TablerateLimitPortTable | not-accessible | current | Table for rate limit of each port. |
| 1.3.6.1.4.1.259.10.1.27.1.16.1.2.1 | RowrateLimitPortEntry | not-accessible | current | Entry for rate limit of each port. |
| 1.3.6.1.4.1.259.10.1.27.1.16.1.2.1.1 | ColumnrlPortIndex | not-accessible | current | The port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface … |
| 1.3.6.1.4.1.259.10.1.27.1.16.1.2.1.6 | ColumnrlPortInputStatus | read-write | current | Whether input rate limit is enabled for this port. |
| 1.3.6.1.4.1.259.10.1.27.1.16.1.2.1.7 | ColumnrlPortOutputStatus | read-write | current | Whether output rate limit is enabled for this port. |
| 1.3.6.1.4.1.259.10.1.27.1.16.1.2.1.10 | ColumnrlPortInputLimitInKilo | read-write | current | Value of the input rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 100000… |
| 1.3.6.1.4.1.259.10.1.27.1.16.1.2.1.11 | ColumnrlPortOutputLimitInKilo | read-write | current | Value of the output rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 10000… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4 | NodediffServMgt | |||
| 1.3.6.1.4.1.259.10.1.27.1.16.4.9 | TablediffServPortTable | not-accessible | current | Table for differentiated services on each port. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.9.1 | RowdiffServPortEntry | not-accessible | current | Entry for differentiated services on each port. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.9.1.1 | ColumndiffServPortIfIndex | not-accessible | current | This object is the interface index of diffServPortEntry. The interface identified by a particular value of this index is the same interface as identified by th… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.9.1.2 | ColumndiffServPortPolicyMapIndex | read-write | current | Specifies the policy map binding to the interface. The policy map identified by a particular value of this index is associated with the same DiffServPolicyMapE… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.9.1.3 | ColumndiffServPortIngressIpAclIndex | read-write | current | Specifies the ingress IP ACL binding to the interface. The ingress IP ACL identified by a particular value of this index is associated with the same diffServAc… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.9.1.4 | ColumndiffServPortIngressMacAclIndex | read-write | current | Specifies the ingress MAC ACL binding to the interface. The ingress MAC ACL identified by a particular value of this index is associated with the same diffServ… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.9.1.5 | ColumndiffServPortIngressIpv6AclIndex | read-write | current | Specifies the ingress IPv6 ACL binding to the interface. The ingress IPv6 ACL identified by a particular value of this index is associated with the same diffSe… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.10 | TablediffServPolicyMapTable | not-accessible | current | Table for policy map. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.10.1 | RowdiffServPolicyMapEntry | not-accessible | current | Entry for policy map. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.10.1.1 | ColumndiffServPolicyMapIndex | not-accessible | current | An index that uniquely identifies an entry in this table. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.10.1.2 | ColumndiffServPolicyMapName | read-create | current | The name of this entry. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.10.1.3 | ColumndiffServPolicyMapDescription | read-create | current | The description of this entry. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.10.1.4 | ColumndiffServPolicyMapElementIndexList | read-only | current | The octet string containes the diffServPolicyMapElementEntry indexes. Two octets express one index and it is represented in network order. This index list indi… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.10.1.5 | ColumndiffServPolicyMapStatus | read-create | current | This object is used to create a new row, or modify or delete an existing row, in this table. The status column has six defined values: The status column has si… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.11 | NodediffServPolicyMapAttachCtl | |||
| 1.3.6.1.4.1.259.10.1.27.1.16.4.11.1 | ScalardiffServPolicyMapAttachCtlIndex | read-write | current | Index for attachment control. Specifies the policy map as the target to relate with the policy map element. The policy map identified by a particular value of … |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.11.2 | ScalardiffServPolicyMapAttachCtlElementIndex | read-write | current | Element Index for attachment control.Specifies the policy map element to relate with the policy map. The policy map element identified by a particular value of… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.11.3 | ScalardiffServPolicyMapAttachCtlAction | read-write | current | Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular policy map element is attached to a particu… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.12 | TablediffServPolicyMapElementTable | not-accessible | current | Table for policy map element. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.12.1 | RowdiffServPolicyMapElementEntry | not-accessible | current | Entry for policy map element. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.12.1.1 | ColumndiffServPolicyMapElementIndex | not-accessible | current | An index that uniquely identifies an entry in this table. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.12.1.2 | ColumndiffServPolicyMapElementClassMapIndex | read-create | current | Specifies the class map binding to this entry. The class map identified by a particular value of this index is associated with the same diffServClassMapEntry a… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.12.1.3 | ColumndiffServPolicyMapElementMeterIndex | read-create | current | Specifies the meter binding to this entry. The meter identified by a particular value of this index is associated with the same diffServMeterEntry as identifie… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.12.1.4 | ColumndiffServPolicyMapElementActionIndex | read-create | current | Specifies the action binding to this entry. The action identified by a particular value of this index is associated with the same diffServActionEntry as identi… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.12.1.5 | ColumndiffServPolicyMapElementStatus | read-create | current | This object is used to create a new row, or modify or delete an existing row, in this table. The status column has six defined values: The status column has si… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.13 | TablediffServClassMapTable | not-accessible | current | Table for class map. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.13.1 | RowdiffServClassMapEntry | not-accessible | current | Entry for class map. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.13.1.1 | ColumndiffServClassMapIndex | not-accessible | current | An index that uniquely identifies an entry in this table. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.13.1.2 | ColumndiffServClassMapName | read-create | current | The name of this entry. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.13.1.3 | ColumndiffServClassMapDescription | read-create | current | The description of this entry. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.13.1.4 | ColumndiffServClassMapMatchType | read-create | current | The map match type of this entry. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.13.1.5 | ColumndiffServClassMapElementIndexTypeList | read-only | current | The octet string containes the type of class map element indexes. Two octets which are represented in network order express one type of the class map element i… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.13.1.6 | ColumndiffServClassMapElementIndexList | read-only | current | The octet string containes the class map element indexes. Two octets express one index and it is represented in network order. This index list indicates the pa… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.13.1.7 | ColumndiffServClassMapStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table.The status column has six defined values: The status column has six d… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.14 | NodediffServClassMapAttachCtl | |||
| 1.3.6.1.4.1.259.10.1.27.1.16.4.14.1 | ScalardiffServClassMapAttachCtlIndex | read-write | current | Index for attachment control. Specifies the class map as the target to relate with class map elements. The class map identified by a particular value of this i… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.14.2 | ScalardiffServClassMapAttachCtlElementIndexType | read-write | current | Element Index for attachment control. Specifies the type of class map element to relate with the class map. When type is macAce(1), the index of diffServClassM… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.14.3 | ScalardiffServClassMapAttachCtlElementIndex | read-write | current | Element Index for attachment control. Specifies the class map element related with the class map. The class map element uses type to indicate diffServAclEntry,… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.14.4 | ScalardiffServClassMapAttachCtlAction | read-write | current | Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular class map element is attached to a particul… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.15 | TablediffServAclTable | not-accessible | current | Table for ACL. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.15.1 | RowdiffServAclEntry | not-accessible | current | Entry for ACL. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.15.1.1 | ColumndiffServAclIndex | not-accessible | current | An index that uniquely identifies an entry in the ACL table. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.15.1.2 | ColumndiffServAclName | read-create | current | The name of this entry. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.15.1.3 | ColumndiffServAclType | read-create | current | The type of this entry. When the value of ACL type is modified, then the ACEs in the diffServAclAceIndexList of this entry will be auto-removed, and this entry… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.15.1.4 | ColumndiffServAclAceIndexList | read-only | current | The octet string containes the ACE indexes. Two octets express one index and it is represented in network order. This index list indicates the particular ACEs … |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.15.1.5 | ColumndiffServAclStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: - 'active', which indicate… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.16 | NodediffServAclAttachCtl | |||
| 1.3.6.1.4.1.259.10.1.27.1.16.4.16.1 | ScalardiffServAclAttachCtlIndex | read-write | current | Index for attachment control. Specifies the ACL as the target to relate with the IP ACE, the MAC ACE or IPv6 ACE. The ACL identified by a particular value of t… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.16.2 | ScalardiffServAclAttachCtlAceType | read-write | current | Type for attachment control. Specifies the type of diffServAclAttachCtlAceIndex to relate with the diffServAclAttachCtlIndex. When the type is macAce(1), the i… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.16.3 | ScalardiffServAclAttachCtlAceIndex | read-write | current | Index for attachment control. Specifies the ACE to relate with the diffServAclAttachCtlIndex. When diffServAclAttachCtlAceType is macAce(1), the value of diffS… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.16.4 | ScalardiffServAclAttachCtlAction | read-write | current | Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular ACE is attached to a particular ACL. When s… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17 | TablediffServIpAceTable | not-accessible | current | Table for IP ACE. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1 | RowdiffServIpAceEntry | not-accessible | current | Entry for IP ACE. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.1 | ColumndiffServIpAceIndex | not-accessible | current | An index that uniquely identifies an entry in the IP ACE table. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.2 | ColumndiffServIpAceType | read-create | current | The specified IP ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the diffServAclEntry and the not supporting field… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.3 | ColumndiffServIpAceAccess | read-create | current | Indicates the action to be taken if a packet matches this ACE. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.4 | ColumndiffServIpAceSourceIpAddr | read-create | current | The specified source IP address. The packet's source address is AND-ed with the value of IpAceSourceIpAddrBitmask and then compared against the value of this o… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.5 | ColumndiffServIpAceSourceIpAddrBitmask | read-create | current | The specified source IP address mask. The packet's source address is AND-ed with the value of IpAceSourceIpAddr and then compared against the value of this obj… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.6 | ColumndiffServIpAceDestIpAddr | read-create | current | The specified destination IP address. The packet's destination address is AND-ed with the value of diffServIpAceDestIpAddrBitmask and then compared against the… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.7 | ColumndiffServIpAceDestIpAddrBitmask | read-create | current | The specified destination IP address mask. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.8 | ColumndiffServIpAceProtocol | read-create | current | The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value of 0 matches every IP packet. The objec… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.9 | ColumndiffServIpAcePrec | read-create | current | Specifies the IP precedence value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 8. This object may no… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.10 | ColumndiffServIpAceTos | read-create | current | Specifies the IP ToS facility value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 9. This object may … |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.11 | ColumndiffServIpAceDscp | read-create | current | Specifies the DSCP value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 64. This object may not be mod… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.12 | ColumndiffServIpAceSourcePortOp | read-create | current | Indicates how a packet's source TCP/UDP port number is to be compared. noOperator(1), which is the default value, means no comparison is to be made with the so… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.13 | ColumndiffServIpAceMinSourcePort | read-create | current | If the diffServIpAceSourcePortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the ass… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.15 | ColumndiffServIpAceSourcePortBitmask | read-create | current | If the diffServIpAceSourcePortOp is equal(2), this indicates the bitmask of the diffServIpAceMinSourcePort. This object may not be modified if the associated d… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.16 | ColumndiffServIpAceDestPortOp | read-create | current | Indicates how a packet's destination TCP/UDP port number is to be compared. noOperator(1), which is the default value, means that no comparison is to be made w… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.17 | ColumndiffServIpAceMinDestPort | read-create | current | If the diffServIpAceDestPortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the assoc… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.19 | ColumndiffServIpAceDestPortBitmask | read-create | current | If the diffServIpAceDestPortOp is equal(2), this indicates the bitmask of the diffServIpAceMinDestPort. This object may not be modified if the associated diffS… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.20 | ColumndiffServIpAceControlCode | read-create | current | Indicates how the control flags of TCP packets are to be compared. diffServIpAceControlCode is AND-ed with diffServIpAceControlCodeBitmask. This object may not… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.21 | ColumndiffServIpAceControlCodeBitmask | read-create | current | Indicates how the control flags of TCP packets are to be compared. It can be used to check multiple flags of the FIN, SYN, RST, PSH, ACK, URG by the sum of FIN… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.17.1.22 | ColumndiffServIpAceStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six … |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18 | TablediffServMacAceTable | not-accessible | current | Table for MAC ACE. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1 | RowdiffServMacAceEntry | not-accessible | current | Entry for MAC ACE. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.1 | ColumndiffServMacAceIndex | not-accessible | current | An index that uniquely identifies an entry in the MAC ACE table. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.2 | ColumndiffServMacAceAccess | read-create | current | Indicates the action to be taken if a packet matches this ACE. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.3 | ColumndiffServMacAcePktformat | read-create | current | Used to check the packet format of the packets. This object cannot be configured when the status of the entry, diffServMacAceStatus, is active(1). |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.4 | ColumndiffServMacAceSourceMacAddr | read-create | current | Indicates the 48-bit source MAC address. The specified source MAC of the packet. The packet's source MAC address is AND-ed with the value of diffServMacAceSour… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.5 | ColumndiffServMacAceSourceMacAddrBitmask | read-create | current | The specified source MAC address mask. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.6 | ColumndiffServMacAceDestMacAddr | read-create | current | Indicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND-ed with the value of dif… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.7 | ColumndiffServMacAceDestMacAddrBitmask | read-create | current | The specified destination MAC address mask. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.8 | ColumndiffServMacAceVidOp | read-create | current | Indicates how a packet's VID is to be compared. This object cannot be configured when the status of the entry, diffServMacAceStatus, is active(1). |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.9 | ColumndiffServMacAceMinVid | read-create | current | Indicates the lower bound of the VID value range if the diffServMacAceVidOp is range(3). |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.10 | ColumndiffServMacAceVidBitmask | read-create | current | The bit mask of the VID. The default value is 0. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.12 | ColumndiffServMacAceEtherTypeOp | read-create | current | Indicates how a packet's ether type is to be compared. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.13 | ColumndiffServMacAceEtherTypeBitmask | read-create | current | The bit mask of Ether type. The default value is 0. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.14 | ColumndiffServMacAceMinEtherType | read-create | current | Indicates the lower bound of the ether type value range if the diffServMacAceEtherTypeOp is range(3). |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.16 | ColumndiffServMacAceStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six … |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.17 | ColumndiffServMacAceCosOp | read-create | current | Indicates how a packet's CoS is compared. If the object type of diffServMacAceCosOp is equal(2), diffServMacAceMinCos indicates the CoS value for comparing, an… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.18 | ColumndiffServMacAceCosBitmask | read-create | current | Indicates the bitmask of the CoS value if the object type of diffServMacAceCosOp is equal(2). The default value is 0. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.18.1.19 | ColumndiffServMacAceMinCos | read-create | current | If the object type of diffServMacAceCosOp is equal(2), diffServMacAceMinCos indicates the CoS value for comparing. If the object type of diffServMacAceCosOp is… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.19 | TablediffServActionTable | not-accessible | current | Table for action. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.19.1 | RowdiffServActionEntry | not-accessible | current | Entry for action. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.19.1.1 | ColumndiffServActionIndex | not-accessible | current | An index that uniquely identifies an entry in the action table. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.19.1.2 | ColumndiffServActionList | read-create | current | The bitmap value used to identify which action capabilities are enabled on the entry. The actionPktNewPri and actionPktNewDscp can not be enabled at the same t… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.19.1.3 | ColumndiffServActionPktNewPri | read-create | current | Specifies the new priority value for the packet when the action is satisfied. If the actionPktNewPri bit of the diffServActionList is not enabled, this object … |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.19.1.5 | ColumndiffServActionPktNewDscp | read-create | current | Specifies the new DSCP value for the packet when the action is satisfied. If the actionPktNewDscp bit of the diffServActionList is not enabled, this object can… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.19.1.6 | ColumndiffServActionRedPktNewDscp | read-create | current | Specifies the new DSCP value for the red marking packet when the action is satisfied. If the actionRedPktNewDscp bit of the diffServActionList is not enabled, … |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.19.1.7 | ColumndiffServActionRedDrop | read-only | current | The actionRedDrop bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the red marking packet will be dropped. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.19.1.8 | ColumndiffServActionStatus | read-create | current | This object is used to create a new row, modify or delete an existing row in this table. The status column has six defined values: The status column has six de… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.20 | TablediffServMeterTable | not-accessible | current | Table for meter. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.20.1 | RowdiffServMeterEntry | not-accessible | current | Entry for meter. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.20.1.1 | ColumndiffServMeterIndex | not-accessible | current | An entry that describes a single set of token bucket parameters. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.20.1.2 | ColumndiffServMeterModel | read-create | current | The Metering algorithm associated with the Token Bucket parameters. The zeroDotZero indicates this is unknown. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.20.1.3 | ColumndiffServMeterRate | read-create | current | The token-bucket rate, in kilobits per second (kbps). |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.20.1.4 | ColumndiffServMeterBurstSize | read-create | current | The maximum number of bytes in a single transmission burst. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.20.1.5 | ColumndiffServMeterInterval | read-create | current | The time interval used with the token bucket. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.20.1.6 | ColumndiffServMeterStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six … |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.21 | TablediffServIpv6AceTable | not-accessible | current | Table for IPv6 ACE. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.21.1 | RowdiffServIpv6AceEntry | not-accessible | current | Entry fo IPv6 ACE. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.21.1.1 | ColumndiffServIpv6AceIndex | not-accessible | current | An index that uniquely identifies an entry in the IPv6 table. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.21.1.2 | ColumndiffServIpv6AceType | read-create | current | The specified IP v6 ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the diffServAclEntry and the not supporting fi… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.21.1.3 | ColumndiffServIpv6AceAccess | read-create | current | Indicates the action to be taken if a packet matches this ACE. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.21.1.4 | ColumndiffServIpv6AceSourceIpAddr | read-create | current | Specifies the source IPv6 address. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.21.1.5 | ColumndiffServIpv6AceSourceIpAddrPrefixLen | read-create | current | The length (in bits) associated with the source IPv6 address prefix of this entry. |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.21.1.6 | ColumndiffServIpv6AceDestIpAddr | read-create | current | Specifies the destination IPv6 address. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1). |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.21.1.7 | ColumndiffServIpv6AceDestIpAddrPrefixLen | read-create | current | The length (in bits) associated with the destination IPv6 address prefix of this entry. This object may not be modified if the associated diffServIpv6AceType o… |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.21.1.9 | ColumndiffServIpv6AceDscp | read-create | current | Specifies the DSCP value to match against. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1). |
| 1.3.6.1.4.1.259.10.1.27.1.16.4.21.1.11 | ColumndiffServIpv6AceStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six … |
| 1.3.6.1.4.1.259.10.1.27.1.20.1 | NodeconsoleMgt | |||
| 1.3.6.1.4.1.259.10.1.27.1.20.1.1 | ScalarconsoleDataBits | read-write | current | Number of data bits. |
| 1.3.6.1.4.1.259.10.1.27.1.20.1.2 | ScalarconsoleParity | read-write | current | Defines the generation of a parity bit. |
| 1.3.6.1.4.1.259.10.1.27.1.20.1.4 | ScalarconsoleStopBits | read-write | current | The console stop bits, valid values are stopbits1(1) or stopbits2(2) |
| 1.3.6.1.4.1.259.10.1.27.1.20.1.5 | ScalarconsoleExecTimeout | read-write | current | In a serial console, use the consoleExecTimeout variable to set the interval that the EXEC command interpreter waits until user input is detected; set the valu… |
| 1.3.6.1.4.1.259.10.1.27.1.20.1.6 | ScalarconsolePasswordThreshold | read-write | current | The number of failed console logon attempts that may be made before the system will not accept a further attempt in the time specified by consoleSilentTime. A … |
| 1.3.6.1.4.1.259.10.1.27.1.20.1.7 | ScalarconsoleSilentTime | read-write | current | The length of time that the management console is inaccessible after the number of failed logon attempts has reached consolePasswordThreshold. A value of 0 dis… |
| 1.3.6.1.4.1.259.10.1.27.1.20.1.8 | ScalarconsoleAdminBaudRate | read-write | current | Baud rate. Valid values are 2400, 4800, 9600, 19200, 38400, 57600, 115200. Setting this variable to 0 means autobaud. Please read the actual baud rate in the c… |
| 1.3.6.1.4.1.259.10.1.27.1.20.1.9 | ScalarconsoleOperBaudRate | read-only | current | The baud rate currently in use. |
| 1.3.6.1.4.1.259.10.1.27.1.20.1.10 | ScalarconsoleLoginResponseTimeout | read-write | current | Console login response timeout setting. Valid range is 0 to 300. Setting to 0 means disabled. |
| 1.3.6.1.4.1.259.10.1.27.1.20.2 | NodetelnetMgt | |||
| 1.3.6.1.4.1.259.10.1.27.1.20.2.1 | ScalartelnetExecTimeout | read-write | current | Specifies the interval that the system waits for user input before terminating the current telnet session. |
| 1.3.6.1.4.1.259.10.1.27.1.20.2.2 | ScalartelnetPasswordThreshold | read-write | current | The number of failed telnet logon attempts that may be made before the system will not accept a further attempt to logon with telnet. |
| 1.3.6.1.4.1.259.10.1.27.1.20.2.3 | ScalartelnetLoginResponseTimeout | read-write | current | Telnet login response timeout setting. Valid range is 1 to 300. This timout setting cannot be disbled. |
| 1.3.6.1.4.1.259.10.1.27.1.20.2.4 | ScalartelnetStatus | read-write | current | To enable or disable the telnet function. Any new telnet request will be rejected and all current telnet sessions will be terminated if this status is set to d… |
| 1.3.6.1.4.1.259.10.1.27.1.20.2.5 | ScalartelnetPortNumber | read-write | current | The telnet session port number. |
| 1.3.6.1.4.1.259.10.1.27.1.26.1 | ScalardnsDomainLookup | read-write | current | To enable the IP Domain Naming System (DNS)-based host name-to-address translation. |
| 1.3.6.1.4.1.259.10.1.27.1.26.2 | ScalardnsDomainName | read-write | current | To define a default domain name to complete unqualified host names (names without a dotted-decimal domain name). |
| 1.3.6.1.4.1.259.10.1.27.1.26.3 | TablednsHostTable | not-accessible | current | This table is used to define static host name-to-address mapping. |
| 1.3.6.1.4.1.259.10.1.27.1.26.3.1 | RowdnsHostEntry | not-accessible | current | A conceptual row for the dnsHostTable. |
| 1.3.6.1.4.1.259.10.1.27.1.26.3.1.1 | ColumndnsHostName | not-accessible | current | The DNS Host name. |
| 1.3.6.1.4.1.259.10.1.27.1.26.3.1.2 | ColumndnsHostIndex | not-accessible | current | The secondary index of this dnsHostTable, representing the sequence of the dnsHostIp. |
| 1.3.6.1.4.1.259.10.1.27.1.26.3.1.3 | ColumndnsHostIp | read-create | current | The DNS Host IP. |
| 1.3.6.1.4.1.259.10.1.27.1.26.5 | TablednsDomainListTable | not-accessible | current | This table defines a list of default domain names to complete unqualified host names. |
| 1.3.6.1.4.1.259.10.1.27.1.26.5.1 | RowdnsDomainListEntry | not-accessible | current | A conceptual row for the dnsDomainListTable. |
| 1.3.6.1.4.1.259.10.1.27.1.26.5.1.1 | ColumndnsDomainListName | not-accessible | current | Domain name. |
| 1.3.6.1.4.1.259.10.1.27.1.26.5.1.2 | ColumndnsDomainListStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.27.1.26.6 | TablednsNameServerTable | not-accessible | current | To specify the address of one or more name servers to use for name and address resolution. This table has fixed size, will get 0.0.0.0 dnsNameServerIp if this … |
| 1.3.6.1.4.1.259.10.1.27.1.26.6.1 | RowdnsNameServerEntry | not-accessible | current | A conceptual row for dnsNameServerTable. |
| 1.3.6.1.4.1.259.10.1.27.1.26.6.1.1 | ColumndnsNameServerIndex | not-accessible | current | Index of this dnsNameServerTable, representing the sequence of the dnsNameServerIp. |
| 1.3.6.1.4.1.259.10.1.27.1.26.6.1.2 | ColumndnsNameServerIp | read-write | current | IP address of name server. |
| 1.3.6.1.4.1.259.10.1.27.1.26.7 | TablednsCacheTable | not-accessible | current | To display the RRs in DNS cache. |
| 1.3.6.1.4.1.259.10.1.27.1.26.7.1 | RowdnsCacheEntry | not-accessible | current | A conceptual row for the dnsCacheTable. |
| 1.3.6.1.4.1.259.10.1.27.1.26.7.1.1 | ColumndnsCacheIndex | not-accessible | current | The entry sequence number. |
| 1.3.6.1.4.1.259.10.1.27.1.26.7.1.2 | ColumndnsCacheFlag | read-only | current | Always get 4, means this record is unreliable. |
| 1.3.6.1.4.1.259.10.1.27.1.26.7.1.3 | ColumndnsCacheType | read-only | current | Cache Type: address(1); cname(2). |
| 1.3.6.1.4.1.259.10.1.27.1.26.7.1.4 | ColumndnsCacheIp | read-only | current | The DNS cache IP. |
| 1.3.6.1.4.1.259.10.1.27.1.26.7.1.5 | ColumndnsCacheTtl | read-only | current | The DNS cache TTL. |
| 1.3.6.1.4.1.259.10.1.27.1.26.7.1.6 | ColumndnsCacheDomain | read-only | current | The DNS cache domain. |
| 1.3.6.1.4.1.259.10.1.27.1.33.1 | NodemcastStormMgt | |||
| 1.3.6.1.4.1.259.10.1.27.1.33.1.1 | TablemcastStormTable | not-accessible | current | Table to manage the control of multicast storms for ports. |
| 1.3.6.1.4.1.259.10.1.27.1.33.1.1.1 | RowmcastStormEntry | not-accessible | current | The conceptual row of multiStormTable. |
| 1.3.6.1.4.1.259.10.1.27.1.33.1.1.1.1 | ColumnmcastStormIfIndex | not-accessible | current | The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.259.10.1.27.1.33.1.1.1.2 | ColumnmcastStormStatus | read-write | current | Whether multicast storm protection is enabled. |
| 1.3.6.1.4.1.259.10.1.27.1.33.1.1.1.4 | ColumnmcastStormPktRate | read-write | current | Multicast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port. |
| 1.3.6.1.4.1.259.10.1.27.1.33.3 | NodebcastStormMgt | |||
| 1.3.6.1.4.1.259.10.1.27.1.33.3.1 | TablebcastStormTable | not-accessible | current | Table to manage the control of broadcast storms for ports. |
| 1.3.6.1.4.1.259.10.1.27.1.33.3.1.1 | RowbcastStormEntry | not-accessible | current | The conceptual row of bcastStormTable. |
| 1.3.6.1.4.1.259.10.1.27.1.33.3.1.1.1 | ColumnbcastStormIfIndex | not-accessible | current | The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.259.10.1.27.1.33.3.1.1.2 | ColumnbcastStormStatus | read-write | current | Whether broadcast storm protection is enabled. |
| 1.3.6.1.4.1.259.10.1.27.1.33.3.1.1.4 | ColumnbcastStormPktRate | read-write | current | Broadcast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port. For a 10 Gbps port, the range is 1042 to… |
| 1.3.6.1.4.1.259.10.1.27.1.33.4 | NodeunknownUcastStormMgt | |||
| 1.3.6.1.4.1.259.10.1.27.1.33.4.1 | TableunknownUcastStormTable | not-accessible | current | Table to manage the unknown unicast storm control. |
| 1.3.6.1.4.1.259.10.1.27.1.33.4.1.1 | RowunknownUcastStormEntry | not-accessible | current | The conceptual row of unknownUcastStormTable. |
| 1.3.6.1.4.1.259.10.1.27.1.33.4.1.1.1 | ColumnunknownUcastStormIfIndex | not-accessible | current | The port or trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same valu… |
| 1.3.6.1.4.1.259.10.1.27.1.33.4.1.1.2 | ColumnunknownUcastStormStatus | read-write | current | The parameter indicates that the unknown unicast storm protection is enabled/disabled. |
| 1.3.6.1.4.1.259.10.1.27.1.33.4.1.1.3 | ColumnunknownUcastStormSampleType | read-write | current | The parameter indicates which storm protection mode is used. |
| 1.3.6.1.4.1.259.10.1.27.1.33.4.1.1.4 | ColumnunknownUcastStormPktRate | read-write | current | The parameter indicates the packet rate of the storm protection. |
| 1.3.6.1.4.1.259.10.1.27.1.44.1 | ScalarmvrStatus | read-write | current | Parameter to enable or disable MVR(Multicast VLAN Registration) on the device. NOTE: IGMP Snooping must be enabled first before enabling MVR and MVR will be di… |
| 1.3.6.1.4.1.259.10.1.27.1.44.2 | ScalarmvrVlanId | read-write | current | To set VLAN for MVR.The VLAN identified by a particular value of this index is the same VLAN as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-… |
| 1.3.6.1.4.1.259.10.1.27.1.44.3 | ScalarmvrMaxGroups | read-only | current | The maximum number of MVR groups. |
| 1.3.6.1.4.1.259.10.1.27.1.44.4 | ScalarmvrCurrentGroups | read-only | current | The current number of MVR groups. |
| 1.3.6.1.4.1.259.10.1.27.1.44.5 | NodemvrGroupsCtl | |||
| 1.3.6.1.4.1.259.10.1.27.1.44.5.1 | ScalarmvrGroupsCtlId | read-write | current | The start of a contiguous range of MVR group addresses. |
| 1.3.6.1.4.1.259.10.1.27.1.44.5.2 | ScalarmvrGroupsCtlCount | read-write | current | The range count for configuring MVR group addresses. |
| 1.3.6.1.4.1.259.10.1.27.1.44.5.3 | ScalarmvrGroupsCtlAction | read-write | current | Sets the configure action for a contiguous range of MVR group addresses. The start addresses is the current value of mvrGroupsCtlId and the range count is the … |
| 1.3.6.1.4.1.259.10.1.27.1.44.6 | TablemvrGroupTable | not-accessible | current | The table for configuring the MVR group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.6.1 | RowmvrGroupEntry | not-accessible | current | The entry for configuring the MVR group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.6.1.1 | ColumnmvrGroupId | not-accessible | current | The multicast address of the MVR group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.6.1.2 | ColumnmvrGroutActive | read-only | current | To indicate if the group has a member or not. If there are no members, the status is inactive(2); otherwise the status is active(1). |
| 1.3.6.1.4.1.259.10.1.27.1.44.6.1.3 | ColumnmvrGroupStatus | read-write | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.27.1.44.7 | TablemvrGroupStaticTable | not-accessible | current | The table for configuring the static members of the MVR group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.7.1 | RowmvrGroupStaticEntry | not-accessible | current | The entry for configuring the static members of the MVR group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.7.1.1 | ColumnmvrGroupStaticAddress | not-accessible | current | The multicast address of the MVR group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.7.1.2 | ColumnmvrGroupStaticPorts | read-write | current | The set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.7.1.3 | ColumnmvrGroupStaticStatus | read-write | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.27.1.44.8 | TablemvrGroupCurrentTable | not-accessible | current | The table for the current members of the MVR group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.8.1 | RowmvrGroupCurrentEntry | not-accessible | current | The entry for the current members of the MVR group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.8.1.1 | ColumnmvrGroupCurrentAddress | not-accessible | current | The multicast address of the MVR group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.8.1.2 | ColumnmvrGroupCurrentPorts | read-only | current | The complete set of ports currently associated with this MVR group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.8.1.3 | ColumnmvrGroupCurrentReceiverVlan | read-only | current | This object indicates the receiver VLAN of the MVR group. None of receiver VLAN belong to the MVR group when the value of this object is 0. |
| 1.3.6.1.4.1.259.10.1.27.1.44.9 | TablemvrPortTable | not-accessible | current | The table for configuring the MVR port. |
| 1.3.6.1.4.1.259.10.1.27.1.44.9.1 | RowmvrPortEntry | not-accessible | current | The entry for configuring the MVR port. |
| 1.3.6.1.4.1.259.10.1.27.1.44.9.1.1 | ColumnmvrIfIndex | not-accessible | current | The port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIn… |
| 1.3.6.1.4.1.259.10.1.27.1.44.9.1.2 | ColumnmvrPortType | read-write | current | For configuring the MVR port type. To disable the MVR port type, use the none(0). |
| 1.3.6.1.4.1.259.10.1.27.1.44.9.1.3 | ColumnmvrPortImmediateLeave | read-write | current | To enable immediate leave on MVR port. |
| 1.3.6.1.4.1.259.10.1.27.1.44.9.1.4 | ColumnmvrPortActive | read-only | current | To indicate if the port is associated with the MVR group. If the port is the MVR receiver port or the MVR source port in MVR vlan, the status is active(1); oth… |
| 1.3.6.1.4.1.259.10.1.27.1.44.10 | ScalarmvrRunningStatus | read-only | current | Describes the running status of MVR (Multicast VLAN Registration) to the switch. A value of true(1) indicates that all necessary conditions in the MVR environm… |
| 1.3.6.1.4.1.259.10.1.27.1.44.12 | ScalarmvrReceiverVlanId | read-write | current | To set receiver VLAN for MVR.The VLAN identified by a particular value of this index is the same VLAN as identified by the same value of dot1qVlanIndex in the … |
| 1.3.6.1.4.1.259.10.1.27.1.44.13 | ScalarmvrMaxReceiverGroups | read-only | current | The maximum number of MVR receiver groups. |
| 1.3.6.1.4.1.259.10.1.27.1.44.14 | ScalarmvrCurrentReceiverGroups | read-only | current | The current number of MVR receiver groups. |
| 1.3.6.1.4.1.259.10.1.27.1.44.15 | TablemvrReceiverGroupTable | not-accessible | current | The table for configuring the MVR receiver group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.15.1 | RowmvrReceiverGroupEntry | not-accessible | current | The entry for configuring the MVR receiver group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.15.1.1 | ColumnmvrReceiverGroupId | not-accessible | current | The multicast address of a MVR receiver group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.15.1.2 | ColumnmvrReceiverGroupActive | read-only | current | Indicate whether the receiver group has a member or not. If there are no members, the status will be inactive(2); if there are members, the status will be acti… |
| 1.3.6.1.4.1.259.10.1.27.1.44.15.1.3 | ColumnmvrReceiverGroupStatus | read-write | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.27.1.44.16 | TablemvrReceiverGroupStaticTable | not-accessible | current | The table for configuring static members of the MVR receiver group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.16.1 | RowmvrReceiverGroupStaticEntry | not-accessible | current | The entry for configuring static members of the MVR receiver group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.16.1.1 | ColumnmvrReceiverGroupStaticAddress | not-accessible | current | The multicast address of a MVR receiver group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.16.1.2 | ColumnmvrReceiverGroupStaticPorts | read-write | current | The set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR receiver group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.16.1.3 | ColumnmvrReceiverGroupStaticStatus | read-write | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.259.10.1.27.1.44.17 | TablemvrReceiverGroupCurrentTable | not-accessible | current | The table for the current members of a MVR receiver group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.17.1 | RowmvrReceiverGroupCurrentEntry | not-accessible | current | The entry for the current members of a MVR receiver group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.17.1.1 | ColumnmvrReceiverGroupCurrentAddress | not-accessible | current | The multicast address of a MVR receiver group. |
| 1.3.6.1.4.1.259.10.1.27.1.44.17.1.2 | ColumnmvrReceiverGroupCurrentPorts | read-only | current | The complete set of ports currently associated with a MVR receiver group. |
| 1.3.6.1.4.1.259.10.1.27.1.46.1 | NodedhcpSnoopGlobal | |||
| 1.3.6.1.4.1.259.10.1.27.1.46.1.1 | ScalardhcpSnoopEnable | read-write | current | This object indicates whether the DHCP Snooping feature is enabled. |
| 1.3.6.1.4.1.259.10.1.27.1.46.1.2 | ScalardhcpSnoopVerifyMacAddressEnable | read-write | current | This object indicates whether DHCP Snooping Mac address verification is enabled. |
| 1.3.6.1.4.1.259.10.1.27.1.46.1.3 | ScalardhcpSnoopInformationOptionEnable | read-write | current | This object indicates whether the DHCP snooping information option(option 82) feature is enabled. |
| 1.3.6.1.4.1.259.10.1.27.1.46.1.4 | ScalardhcpSnoopInformationOptionPolicy | read-write | current | This object indicates which reforwarding policy shall be used for DHCP snooping information option(option 82). A value of drop(1) means to drop the DHCP reques… |
| 1.3.6.1.4.1.259.10.1.27.1.46.1.5 | ScalardhcpSnoopBindingsTableCtlAction | read-write | current | Set this to store(2) to store DHCP snooping binding entries to flash. Set this to clear(3) to clear DHCP snooping binding entries from flash. noAction(1) will … |
| 1.3.6.1.4.1.259.10.1.27.1.46.2 | NodedhcpSnoopVlan | |||
| 1.3.6.1.4.1.259.10.1.27.1.46.2.1 | TabledhcpSnoopVlanConfigTable | not-accessible | current | A table contains DHCP Snooping configurations of existing VLANs. |
| 1.3.6.1.4.1.259.10.1.27.1.46.2.1.1 | RowdhcpSnoopVlanConfigEntry | not-accessible | current | An instance contains the configuration to enable or disable DHCP Snooping at each existing VLAN. |
| 1.3.6.1.4.1.259.10.1.27.1.46.2.1.1.1 | ColumndhcpSnoopVlanIndex | not-accessible | current | This object indicates the VLAN ID on which DHCP Snooping feature is configured. |
| 1.3.6.1.4.1.259.10.1.27.1.46.2.1.1.2 | ColumndhcpSnoopVlanEnable | read-write | current | This object indicates whether DHCP Snooping is enabled in this VLAN. |
| 1.3.6.1.4.1.259.10.1.27.1.46.3 | NodedhcpSnoopInterface | |||
| 1.3.6.1.4.1.259.10.1.27.1.46.3.1 | TabledhcpSnoopPortConfigTable | not-accessible | current | A table provides the mechanism to configure the trust state of each port or trunk for DHCP Snooping purpose. |
| 1.3.6.1.4.1.259.10.1.27.1.46.3.1.1 | RowdhcpSnoopPortConfigEntry | not-accessible | current | An instance contains the configuration to enable or disable trust state of each port or trunk for DHCP Snooping purpose. |
| 1.3.6.1.4.1.259.10.1.27.1.46.3.1.1.1 | ColumndhcpSnoopPortIfIndex | not-accessible | current | The ifIndex value of the port or trunk. |
| 1.3.6.1.4.1.259.10.1.27.1.46.3.1.1.2 | ColumndhcpSnoopPortTrustEnable | read-write | current | This object indicates whether the port or trunk is trusted for DHCP Snooping purpose. |
| 1.3.6.1.4.1.259.10.1.27.1.46.4 | NodedhcpSnoopBindings | |||
| 1.3.6.1.4.1.259.10.1.27.1.46.4.1 | TabledhcpSnoopBindingsTable | not-accessible | current | A table contains the DHCP bindings information learnt by the device. |
| 1.3.6.1.4.1.259.10.1.27.1.46.4.1.1 | RowdhcpSnoopBindingsEntry | not-accessible | current | An instance contains the Mac address, IP address type, IP address, VLAN number, interface number, leased time and status. |
| 1.3.6.1.4.1.259.10.1.27.1.46.4.1.1.1 | ColumndhcpSnoopBindingsVlanIndex | not-accessible | current | This object indicates the VLAN which a DHCP client host belongs to. |
| 1.3.6.1.4.1.259.10.1.27.1.46.4.1.1.2 | ColumndhcpSnoopBindingsMacAddress | not-accessible | current | This object indicates the MAC address of a DHCP client host. |
| 1.3.6.1.4.1.259.10.1.27.1.46.4.1.1.3 | ColumndhcpSnoopBindingsAddrType | read-only | current | This object indicates the type of IP address denoted in dhcpSnoopBindingsIpAddress type. |
| 1.3.6.1.4.1.259.10.1.27.1.46.4.1.1.4 | ColumndhcpSnoopBindingsEntryType | read-only | current | This object indicates that this binding is obtained from dynamically learning or is a static configuraion. |
| 1.3.6.1.4.1.259.10.1.27.1.46.4.1.1.5 | ColumndhcpSnoopBindingsIpAddress | read-only | current | This object indicates the allocated IP address of a DHCP client host. |
| 1.3.6.1.4.1.259.10.1.27.1.46.4.1.1.6 | ColumndhcpSnoopBindingsPortIfIndex | read-only | current | This object indicates the port or trunk where a DHCP client host connects to. |
| 1.3.6.1.4.1.259.10.1.27.1.46.4.1.1.7 | ColumndhcpSnoopBindingsLeaseTime | read-only | current | This object indicates the leased time of this DHCP bindings. |
| 1.3.6.1.4.1.259.10.1.27.1.46.5 | NodedhcpSnoopStatistics | |||
| 1.3.6.1.4.1.259.10.1.27.1.46.5.1 | ScalardhcpSnoopTotalForwardedPkts | read-only | current | Indicates the total number of packets subjected to DHCP Snooping is forwarded. |
| 1.3.6.1.4.1.259.10.1.27.1.46.5.3 | ScalardhcpSnoopUntrustedPortDroppedPkts | read-only | current | Indicates the number of packets subjected to DHCP Snooping is dropped because they come from untrusted interface. |
| 1.3.6.1.4.1.259.10.1.27.1.47.1 | ScalarclusterEnable | read-write | current | Enables or disables clustering on the device. |
| 1.3.6.1.4.1.259.10.1.27.1.47.2 | ScalarclusterCommanderEnable | read-write | current | Enables or disables the device as commander in a cluster. |
| 1.3.6.1.4.1.259.10.1.27.1.47.4 | ScalarclusterIpPool | read-write | current | The start internal IP address of a cluster pool. |
| 1.3.6.1.4.1.259.10.1.27.1.47.5 | ScalarclusterClearCandidateTable | read-write | current | Setting this object to clear(2) starts to clear the candidate table. |
| 1.3.6.1.4.1.259.10.1.27.1.47.6 | ScalarclusterRole | read-only | current | The current role of the device in a cluster. commander(1) : The switch is the controlling device in a cluster. candidate(2) : The switch has been discovered by… |
| 1.3.6.1.4.1.259.10.1.27.1.47.7 | ScalarclusterMemberCount | read-only | current | The total number of members in a cluster. |
| 1.3.6.1.4.1.259.10.1.27.1.47.8 | ScalarclusterCandidateCount | read-only | current | The total number of candidates in a cluster. |
| 1.3.6.1.4.1.259.10.1.27.1.47.9 | TableclusterCandidateTable | not-accessible | current | A table listing cluster candidates. |
| 1.3.6.1.4.1.259.10.1.27.1.47.9.1 | RowclusterCandidateEntry | not-accessible | current | A conceptual row containing the information of the candidate. |
| 1.3.6.1.4.1.259.10.1.27.1.47.9.1.1 | ColumnclusterCandidateMacAddr | not-accessible | current | The MAC address of the candidate. |
| 1.3.6.1.4.1.259.10.1.27.1.47.9.1.3 | ColumnclusterCandidateDesc | read-only | current | The description of the candidate. |
| 1.3.6.1.4.1.259.10.1.27.1.47.9.1.4 | ColumnclusterCandidateRole | read-only | current | The role of the candidate. candidate(2) : The switch is discovered by the commander, but it has not been manually configured for access from the commander. act… |
| 1.3.6.1.4.1.259.10.1.27.1.47.10 | TableclusterMemberTable | not-accessible | current | A table listing clustering members. |
| 1.3.6.1.4.1.259.10.1.27.1.47.10.1 | RowclusterMemberEntry | not-accessible | current | A conceptual row containing the information of the member. |
| 1.3.6.1.4.1.259.10.1.27.1.47.10.1.1 | ColumnclusterMemberId | not-accessible | current | The ID of the member. |
| 1.3.6.1.4.1.259.10.1.27.1.47.10.1.2 | ColumnclusterMemberMacAddr | read-only | current | The MAC address of the member. |
| 1.3.6.1.4.1.259.10.1.27.1.47.10.1.3 | ColumnclusterMemberDesc | read-only | current | The description of the member. |
| 1.3.6.1.4.1.259.10.1.27.1.47.10.1.4 | ColumnclusterMemberActive | read-only | current | The active status of the member. activeMember(3) : The switch is manually configured for access from the commander and it is active in the cluster. inactiveMem… |
| 1.3.6.1.4.1.259.10.1.27.1.47.11 | NodeclusterMemberAddCtl | |||
| 1.3.6.1.4.1.259.10.1.27.1.47.11.1 | ScalarclusterMemberAddCtlMacAddr | read-write | current | The MAC address of the device associated with clusterMemberAddCtlAction. |
| 1.3.6.1.4.1.259.10.1.27.1.47.11.2 | ScalarclusterMemberAddCtlId | read-write | current | The member id associated with clusterMemberAddCtlAction. |
| 1.3.6.1.4.1.259.10.1.27.1.47.11.5 | ScalarclusterMemberAddCtlAction | read-write | current | Adds the device to members that can be accessed from the commander. The MAC of the device is the current value of clusterMemberAddCtlMacAddr and the assigned m… |
| 1.3.6.1.4.1.259.10.1.27.1.47.12 | NodeclusterMemberRemoveCtl | |||
| 1.3.6.1.4.1.259.10.1.27.1.47.12.1 | ScalarclusterMemberRemoveCtlId | read-write | current | The member ID associated with clusterMemberRemoveCtlAction. |
| 1.3.6.1.4.1.259.10.1.27.1.47.12.2 | ScalarclusterMemberRemoveCtlAction | read-write | current | Removes the device from members that can be accessed from the commander. The member ID is the current value of clusterMemberRemoveCtlId. Set this object to rem… |
| 1.3.6.1.4.1.259.10.1.27.1.48.1 | TableipSrcGuardConfigTable | not-accessible | current | A table contains the configurations to enable or disable IP Source Guard at each port or trunk. |
| 1.3.6.1.4.1.259.10.1.27.1.48.1.1 | RowipSrcGuardConfigEntry | not-accessible | current | An instance contains the configuration to enable or disable IP Source Guard at each port or trunk. |
| 1.3.6.1.4.1.259.10.1.27.1.48.1.1.1 | ColumnipSrcGuardPortIfIndex | not-accessible | current | This object idents the port or trunk which is capable of IP Source Guard feature. |
| 1.3.6.1.4.1.259.10.1.27.1.48.1.1.2 | ColumnipSrcGuardMode | read-write | current | This object indicates whether Ip Source Guard is enabled at this interface. If the value equals 0, it means Ip Source Guard is disabled. If the value equals 1,… |
| 1.3.6.1.4.1.259.10.1.27.1.48.2 | TableipSrcGuardAddrTable | not-accessible | current | A table contains the IP Source Guard bindings information learnt by the device. |
| 1.3.6.1.4.1.259.10.1.27.1.48.2.1 | RowipSrcGuardAddrEntry | not-accessible | current | An instance contains the Mac address, IP address type, IP address, VLAN number, interface number, leased time and status. |
| 1.3.6.1.4.1.259.10.1.27.1.48.2.1.1 | ColumnipSrcGuardBindingsVlanIndex | not-accessible | current | This object indicates the VLAN which a DHCP client host belongs to. |
| 1.3.6.1.4.1.259.10.1.27.1.48.2.1.2 | ColumnipSrcGuardBindingsMacAddress | not-accessible | current | This object indicates the MAC address of a DHCP client host. |
| 1.3.6.1.4.1.259.10.1.27.1.48.2.1.3 | ColumnipSrcGuardBindingsAddrType | read-create | current | This object indicates the type of IP address denoted in ipSrcGuardBindingsIpAddress type. |
| 1.3.6.1.4.1.259.10.1.27.1.48.2.1.4 | ColumnipSrcGuardBindingsEntryType | read-only | current | This object indicates that this binding is obtained from dynamically learning or is a static configuraion. |
| 1.3.6.1.4.1.259.10.1.27.1.48.2.1.5 | ColumnipSrcGuardBindingsIpAddress | read-create | current | This object indicates the allocated IP address of a DHCP client host. |
| 1.3.6.1.4.1.259.10.1.27.1.48.2.1.6 | ColumnipSrcGuardBindingsPortIfIndex | read-create | current | This object indicates the port or trunk where a DHCP client host connects to. |
| 1.3.6.1.4.1.259.10.1.27.1.48.2.1.7 | ColumnipSrcGuardBindingsLeaseTime | read-only | current | This object indicates the leased time of this DHCP bindings. |
| 1.3.6.1.4.1.259.10.1.27.1.48.2.1.8 | ColumnipSrcGuardBindingsStatus | read-create | current | The status of this conceptual row entry. This object issued to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.259.10.1.27.1.49.1 | ScalarupnpStatus | read-write | current | Sets enabled(1) to enable UPnP device, and sets disabled(2) to disable UPnP device. |
| 1.3.6.1.4.1.259.10.1.27.1.49.2 | ScalarupnpAdvertisingDuration | read-write | current | The interval(in seconds) between available UPnP device advertising messages sent by the switch. |
| 1.3.6.1.4.1.259.10.1.27.1.49.3 | ScalarupnpTtl | read-write | current | Specifies the TTL value of the UPnP advertising messages sent by the switch. When the TTL value is greater than 1, it is possible to send UPnP advertising mess… |
| 1.3.6.1.4.1.259.10.1.27.1.52.1 | TableoamPortStatusTable | not-accessible | current | A table contains the status of OAM at each port. |
| 1.3.6.1.4.1.259.10.1.27.1.52.1.1 | RowoamPortStatusEntry | not-accessible | current | An entry contains the status of OAM at each port. |
| 1.3.6.1.4.1.259.10.1.27.1.52.1.1.1 | ColumnoamPortIfIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.10.1.27.1.52.1.1.2 | ColumnoamEnableStatus | read-write | current | This object configures the status of OAM at each port. |
| 1.3.6.1.4.1.259.10.1.27.1.52.2 | TableoamPortModeTable | not-accessible | current | A table contains the mode of OAM at each port. |
| 1.3.6.1.4.1.259.10.1.27.1.52.2.1 | RowoamPortModeEntry | not-accessible | current | An entry contains the mode of OAM at each port. |
| 1.3.6.1.4.1.259.10.1.27.1.52.2.1.1 | ColumnoamPortModeIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.10.1.27.1.52.2.1.2 | ColumnoamPortMode | read-write | current | This object configures the mode of OAM at each port. |
| 1.3.6.1.4.1.259.10.1.27.1.52.3 | TableoamPortClearStatTable | not-accessible | current | A table contains the information of clear OAM statistics at each port. |
| 1.3.6.1.4.1.259.10.1.27.1.52.3.1 | RowoamPortClearStatEntry | not-accessible | current | An entry contains the information of clear OAM statistics at each port. |
| 1.3.6.1.4.1.259.10.1.27.1.52.3.1.1 | ColumnoamPortClearStatIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.259.10.1.27.1.52.3.1.2 | ColumnoamClearStatistics | read-write | current | This variable is used to clear the counters for OAM. Set this variable to clear(2) to perform the clear operation, noClear(1) will always be displayed when rea… |
| 1.3.6.1.4.1.259.10.1.27.1.52.4 | TableoamLoopbackTable | not-accessible | current | Table for OAM remote loopback test. |
| 1.3.6.1.4.1.259.10.1.27.1.52.4.1 | RowoamLoopbackEntry | not-accessible | current | Entry for OAM remote loopback test. |
| 1.3.6.1.4.1.259.10.1.27.1.52.4.1.1 | ColumnoamLoopbackTestIfIndex | not-accessible | current | The ifIndex value of the port(excluding trunk). The interface identified by a particular value of this index is the same interface as identified by the same va… |
| 1.3.6.1.4.1.259.10.1.27.1.52.4.1.2 | ColumnoamLoopbackTestPacketNumber | read-write | current | Setting the packet number when performing loopback test. |
| 1.3.6.1.4.1.259.10.1.27.1.52.4.1.3 | ColumnoamLoopbackTestPacketSize | read-write | current | Setting the packet size when performing loopback test. |
| 1.3.6.1.4.1.259.10.1.27.1.52.4.1.4 | ColumnoamLoopbackTestAction | read-write | current | Setting this object to test(2) to begin the loopback test. This object will be noTest(1) when the loopback test is canceled or the loopback test has finished. |
| 1.3.6.1.4.1.259.10.1.27.1.52.4.1.5 | ColumnoamLoopbackTestResultTx | read-only | current | A count of the the total number of loopback frames transmitted at last loopback test on this interface. |
| 1.3.6.1.4.1.259.10.1.27.1.52.4.1.6 | ColumnoamLoopbackTestResultRx | read-only | current | A count of the the total number of loopback frames received at last loopback test on this interface. |
| 1.3.6.1.4.1.259.10.1.27.1.55.1 | ScalarsFlowStatus | read-write | current | Set this to enabled(1) to enable global sFlow, and set this to disabled(2) to disable global sFlow. |
| 1.3.6.1.4.1.259.10.1.27.1.55.2 | TablesFlowPortTable | not-accessible | current | A table that contains the settings of sFlow. |
| 1.3.6.1.4.1.259.10.1.27.1.55.2.1 | RowsFlowPortEntry | not-accessible | current | The conceptual row of sFlowPortTable. |
| 1.3.6.1.4.1.259.10.1.27.1.55.2.1.1 | ColumnsFlowPortIndex | not-accessible | current | The port number of a port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the… |
| 1.3.6.1.4.1.259.10.1.27.1.55.2.1.2 | ColumnsFlowPortStatus | read-create | current | Set this to enabled(1) to enable sFlow on this port, and set this to disabled(2) to disable sFlow on this port. |
| 1.3.6.1.4.1.3709.3.5.201.1.5.7 | TablestaLoopbackDetectionPortTable | not-accessible | current | A table provides the mechanism to configure the spanning tree loopback detection of each port or trunk |
| 1.3.6.1.4.1.3709.3.5.201.1.5.7.1 | RowstaLoopbackDetectionPortEntry | not-accessible | current | A conceptual row of staLoopbackDetectionPortTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.5.7.1.1 | ColumnstaLoopbackDetectionPortIfIndex | accessible-for-notify | current | The port and the trunk interfaces of the portTable. The interface identified by a particular value of this index is the same interface as identified by the sam… |
| 1.3.6.1.4.1.3709.3.5.201.1.5.7.1.2 | ColumnstaLoopbackDetectionPortStatus | read-write | current | Status of the port on whether spanning tree loopback detection is enabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.5.7.1.3 | ColumnstaLoopbackDetectionPortTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the loopback BPDUs have been detected. |
| 1.3.6.1.4.1.3709.3.5.201.1.5.7.1.4 | ColumnstaLoopbackDetectionPortReleaseMode | read-write | current | Setting it to auto(1) indicates that this port can be released from discarding state automatically after loopback has occurred. Setting it to manual(2) indicat… |
| 1.3.6.1.4.1.3709.3.5.201.1.5.7.1.5 | ColumnstaLoopbackDetectionPortRelease | read-write | current | Set this to release(2) to release the port from discarding state. noRelease(1) will always be obtained when reading this variable. |
| 1.3.6.1.4.1.3709.3.5.201.1.7.1 | ScalarrestartOpCodeFile | read-write | current | Name of op-code file for start-up. |
| 1.3.6.1.4.1.3709.3.5.201.1.7.2 | ScalarrestartConfigFile | read-write | current | Name of configuration file for start-up. |
| 1.3.6.1.4.1.3709.3.5.201.1.7.3 | ScalarrestartControl | read-write | current | Setting this object to warmBoot(2) causes the device to reinitialize itself such that neither the agent configuration nor the protocol entity implementation is… |
| 1.3.6.1.4.1.3709.3.5.201.1.8.1 | TablemirrorTable | not-accessible | current | Table for port mirroring, enabling a port to be mirrored to/from another port. Not all ports can be mirrored and limitations may apply as to which ports can be… |
| 1.3.6.1.4.1.3709.3.5.201.1.8.1.1 | RowmirrorEntry | not-accessible | current | The conceptual row of mirrorTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.8.1.1.1 | ColumnmirrorDestinationPort | not-accessible | current | The destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the sa… |
| 1.3.6.1.4.1.3709.3.5.201.1.8.1.1.2 | ColumnmirrorSourcePort | not-accessible | current | The source port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same va… |
| 1.3.6.1.4.1.3709.3.5.201.1.8.1.1.3 | ColumnmirrorType | read-create | current | If this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is both(3), both receive and… |
| 1.3.6.1.4.1.3709.3.5.201.1.8.1.1.4 | ColumnmirrorStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.8.2 | TablevlanMirrorTable | not-accessible | current | Table for VLAN mirroring, enabling a VLAN to be mirrored to a port. |
| 1.3.6.1.4.1.3709.3.5.201.1.8.2.1 | RowvlanMirrorEntry | not-accessible | current | The conceptual row of vlanMirrorTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.8.2.1.1 | ColumnvlanMirrorDestinationPort | not-accessible | current | The destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the sa… |
| 1.3.6.1.4.1.3709.3.5.201.1.8.2.1.2 | ColumnvlanMirrorSourceVlan | not-accessible | current | The source VLAN for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of dot… |
| 1.3.6.1.4.1.3709.3.5.201.1.8.2.1.4 | ColumnvlanMirrorStatus | read-create | current | Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.1 | ScalarigmpSnoopStatus | read-write | current | Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.2 | ScalarigmpSnoopQuerier | read-write | current | Enables (disables) whether the switch acts as an IGMP querier. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.3 | ScalarigmpSnoopQueryCount | read-write | current | The query count from a querier, during which a response is expected from an endstation. If a querier has sent a number of counts defined by igmpSnoopQueryCount… |
| 1.3.6.1.4.1.3709.3.5.201.1.9.4 | ScalarigmpSnoopQueryInterval | read-write | current | The interval (in seconds) between IGMP host-query messages sent by the switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.5 | ScalarigmpSnoopQueryMaxResponseTime | read-write | current | The time after a query, during which a response is expected from an endstation. If a querier has sent a number of queries defined by igmpSnoopQueryCount, but a… |
| 1.3.6.1.4.1.3709.3.5.201.1.9.6 | ScalarigmpSnoopRouterPortExpireTime | read-write | current | Sets the time (in seconds) the switch waits after the previous querier has stopped querying before the router port (which received query packets from previous … |
| 1.3.6.1.4.1.3709.3.5.201.1.9.7 | ScalarigmpSnoopVersion | read-write | current | IGMP version snooped |
| 1.3.6.1.4.1.3709.3.5.201.1.9.8 | TableigmpSnoopRouterCurrentTable | not-accessible | current | Table for current router ports. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.8.1 | RowigmpSnoopRouterCurrentEntry | not-accessible | current | Entry for current router ports. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.8.1.1 | ColumnigmpSnoopRouterCurrentVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.3709.3.5.201.1.9.8.1.2 | ColumnigmpSnoopRouterCurrentPorts | read-only | current | The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.8.1.3 | ColumnigmpSnoopRouterCurrentStatus | read-only | current | The set of ports which are static router ports. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.9 | TableigmpSnoopRouterStaticTable | not-accessible | current | Table for static router ports. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.9.1 | RowigmpSnoopRouterStaticEntry | not-accessible | current | Entry for static router ports. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.9.1.1 | ColumnigmpSnoopRouterStaticVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.3709.3.5.201.1.9.9.1.2 | ColumnigmpSnoopRouterStaticPorts | read-create | current | The set of ports which are static router ports. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.9.1.3 | ColumnigmpSnoopRouterStaticStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.10 | TableigmpSnoopMulticastCurrentTable | not-accessible | current | Table for current multicast addresses. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.10.1 | RowigmpSnoopMulticastCurrentEntry | not-accessible | current | Entry for current multicast addresses. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.10.1.1 | ColumnigmpSnoopMulticastCurrentVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.3709.3.5.201.1.9.10.1.2 | ColumnigmpSnoopMulticastCurrentIpAddress | not-accessible | current | IP address of multicast group. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.10.1.3 | ColumnigmpSnoopMulticastCurrentPorts | read-only | current | The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.10.1.4 | ColumnigmpSnoopMulticastCurrentStatus | read-only | current | The set of ports which are static members. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.11 | TableigmpSnoopMulticastStaticTable | not-accessible | current | Table for static multicast addresses. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.11.1 | RowigmpSnoopMulticastStaticEntry | not-accessible | current | Entry for static multicast addresses. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.11.1.1 | ColumnigmpSnoopMulticastStaticVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.3709.3.5.201.1.9.11.1.2 | ColumnigmpSnoopMulticastStaticIpAddress | not-accessible | current | IP address of multicast group. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.11.1.3 | ColumnigmpSnoopMulticastStaticPorts | read-create | current | The set of ports which are members. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.11.1.4 | ColumnigmpSnoopMulticastStaticStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.14 | TableigmpSnoopCurrentVlanTable | not-accessible | current | Table for enabling or disabling IGMP snooping per VLAN. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.14.1 | RowigmpSnoopCurrentVlanEntry | not-accessible | current | Entry for enabling or disabling IGMP snooping. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.14.1.1 | ColumnigmpSnoopCurrentVlanIndex | not-accessible | current | Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.14.1.3 | ColumnigmpSnoopCurrentVlanImmediateLeave | read-write | current | The parameter to enable or disable the Immediate-Leave feature on this VLAN. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.15 | ScalarigmpSnoopLeaveProxy | read-write | current | This enables or disables Leave Proxy for IGMP Snooping. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.17 | ScalarigmpSnoopFilterStatus | read-write | current | Parameter to enable or disable IGMP filtering on the device. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.18 | TableigmpSnoopProfileTable | not-accessible | current | The table for configuring the IGMP snooping profile. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.18.1 | RowigmpSnoopProfileEntry | not-accessible | current | The entry for configuring the IGMP snooping profile. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.18.1.1 | ColumnigmpSnoopProfileId | not-accessible | current | The ID of the IGMP snooping profile. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.18.1.2 | ColumnigmpSnoopProfileAction | read-write | current | The access mode of the IGMP snooping profile. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.18.1.3 | ColumnigmpSnoopProfileStatus | read-write | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.19 | NodeigmpSnoopProfileCtl | |||
| 1.3.6.1.4.1.3709.3.5.201.1.9.19.1 | ScalarigmpSnoopProfileCtlId | read-write | current | The ID of the IGMP snooping profile. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.19.2 | ScalarigmpSnoopProfileCtlInetAddressType | read-write | current | The address type is associated with this agent. Only ipv4(1) type is supported. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.19.3 | ScalarigmpSnoopProfileCtlStartInetAddress | read-write | current | The specified addresses in the start of the controlled IP multicast addresses. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.19.4 | ScalarigmpSnoopProfileCtlEndInetAddress | read-write | current | The specified addresses in the end of the controlled IP multicast addresses. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.19.5 | ScalarigmpSnoopProfileCtlAction | read-write | current | Setting it to create(2) creates the range of the controlled IP multicast addresses. Setting it to destroy(3) destroys the range of the controlled IP multicast … |
| 1.3.6.1.4.1.3709.3.5.201.1.9.20 | TableigmpSnoopProfileRangeTable | not-accessible | current | The table for configuring the range of the IGMP snooping profile. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.20.1 | RowigmpSnoopProfileRangeEntry | not-accessible | current | The entry for configuring the range of the IGMP snooping profile. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.20.1.1 | ColumnigmpSnoopProfileRangeProfileId | not-accessible | current | This is defined as igmpSnoopProfileId. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.20.1.2 | ColumnigmpSnoopProfileRangeInetAddressType | not-accessible | current | The address type is associated with this agent. Only ipv4(1) type is supported. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.20.1.3 | ColumnigmpSnoopProfileRangeStartInetAddress | not-accessible | current | The specified addresses in the start of the controlled IP multicast addresses. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.20.1.4 | ColumnigmpSnoopProfileRangeEndInetAddress | read-only | current | The specified addresses in the end of the controlled IP multicast addresses. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.20.1.5 | ColumnigmpSnoopProfileRangeAction | read-only | current | The access mode of the IGMP snooping profile. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.21 | TableigmpSnoopFilterPortTable | not-accessible | current | Table for port configuration in IGMP filtering. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.21.1 | RowigmpSnoopFilterPortEntry | not-accessible | current | Entry for port configuration in IGMP filtering. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.21.1.1 | ColumnigmpSnoopFilterPortIndex | not-accessible | current | The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface ide… |
| 1.3.6.1.4.1.3709.3.5.201.1.9.21.1.2 | ColumnigmpSnoopFilterPortProfileId | read-write | current | The igmpSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the igmpSnoopProfileId object. I… |
| 1.3.6.1.4.1.3709.3.5.201.1.9.22 | TableigmpSnoopThrottlePortTable | not-accessible | current | Table for port configuration in IGMP throttling. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.22.1 | RowigmpSnoopThrottlePortEntry | not-accessible | current | Entry for port configuration in IGMP throttling. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.22.1.1 | ColumnigmpSnoopThrottlePortIndex | not-accessible | current | The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface ide… |
| 1.3.6.1.4.1.3709.3.5.201.1.9.22.1.2 | ColumnigmpSnoopThrottlePortRunningStatus | read-only | current | Describes the running status of the IGMP throttling to the switch. A value of true(1) indicates the IGMP throttling mechanism is active. A value of false(2) in… |
| 1.3.6.1.4.1.3709.3.5.201.1.9.22.1.3 | ColumnigmpSnoopThrottlePortAction | read-write | current | The action mode of the IGMP throttling. A value of replace(1) means to replace a joined multicast group randomly when an interface receives an IGMP report and … |
| 1.3.6.1.4.1.3709.3.5.201.1.9.22.1.4 | ColumnigmpSnoopThrottlePortMaxGroups | read-write | current | The maximum number of IGMP groups that the interface can join. |
| 1.3.6.1.4.1.3709.3.5.201.1.9.22.1.5 | ColumnigmpSnoopThrottlePortCurrentGroups | read-only | current | The current number of IGMP groups that the interface has joined. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.1 | TablenetConfigTable | not-accessible | current | A table of netConfigEntry. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.1.1 | RownetConfigEntry | not-accessible | current | A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is … |
| 1.3.6.1.4.1.3709.3.5.201.1.10.1.1.1 | ColumnnetConfigIfIndex | not-accessible | current | The VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.1.1.2 | ColumnnetConfigIPAddress | not-accessible | current | The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask is 0.0.0.0, then wh… |
| 1.3.6.1.4.1.3709.3.5.201.1.10.1.1.3 | ColumnnetConfigSubnetMask | not-accessible | current | The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then … |
| 1.3.6.1.4.1.3709.3.5.201.1.10.1.1.4 | ColumnnetConfigPrimaryInterface | read-create | current | Whether this is a primary interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.1.1.5 | ColumnnetConfigUnnumbered | read-only | current | Whether this is an unnumbered interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.1.1.6 | ColumnnetConfigStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.3709.3.5.201.1.10.2 | ScalarnetDefaultGateway | read-write | current | The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.3 | ScalaripHttpState | read-write | current | Whether HTTP is enabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.4 | ScalaripHttpPort | read-write | current | The port number for HTTP. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.5 | ScalaripDhcpRestart | read-write | current | When set to restart(1) the DHCP server will restart. When read, this value always returns noRestart(2). |
| 1.3.6.1.4.1.3709.3.5.201.1.10.6 | ScalaripHttpsState | read-write | current | Whether HTTPS is enabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.7 | ScalaripHttpsPort | read-write | current | The port number for HTTPS. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.11 | NodedhcpMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.10.11.1 | NodedhcpClient | |||
| 1.3.6.1.4.1.3709.3.5.201.1.10.11.1.1 | NodedhcpcOptions | |||
| 1.3.6.1.4.1.3709.3.5.201.1.10.11.1.1.1 | TabledhcpcInterfaceTable | not-accessible | current | Table for DHCP client information listed by interface. Depending on the nature of the product, this table may have only one entry(e.g. for the management VLAN)… |
| 1.3.6.1.4.1.3709.3.5.201.1.10.11.1.1.1.1 | RowdhcpcInterfaceEntry | not-accessible | current | Entry for DHCP client information listed by interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.11.1.1.1.1.1 | ColumndhcpcIfIndex | not-accessible | current | This is defined by ifIndex in the IF-MIB.(static vlan if index) |
| 1.3.6.1.4.1.3709.3.5.201.1.10.11.1.1.1.1.2 | ColumndhcpcIfClientIdMode | read-write | current | Whether the Client ID is in text mode or in Hex mode. |
| 1.3.6.1.4.1.3709.3.5.201.1.10.11.1.1.1.1.3 | ColumndhcpcIfClientId | read-write | current | The value that the DHCP client sets in the client_id option of DHCPDISCOVER and DHCPREQUEST messages. This value may be used by DHCP servers to uniquely identi… |
| 1.3.6.1.4.1.3709.3.5.201.1.12.1 | TablevlanTable | not-accessible | current | Table for VLAN configuration. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.1.1 | RowvlanEntry | not-accessible | current | Entry for VLAN configuration. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.1.1.1 | ColumnvlanIndex | not-accessible | current | Based on dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.1.1.2 | ColumnvlanAddressMethod | read-write | current | Method to get the IP address. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.2 | TablevlanPortTable | not-accessible | current | Table for port configuration in VLAN. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.2.1 | RowvlanPortEntry | not-accessible | current | Entry for port configuration in VLAN. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.2.1.1 | ColumnvlanPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.3709.3.5.201.1.12.2.1.2 | ColumnvlanPortMode | read-write | current | This variable sets the 802.1Q VLAN mode. Setting it to hybrid(1) sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link. Setting it to access(3) set… |
| 1.3.6.1.4.1.3709.3.5.201.1.12.2.1.3 | ColumnvlanPortPrivateVlanType | read-write | current | The port type defined for private VLAN. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.5 | TableprotocolVlanTable | not-accessible | current | The configuration table which contains the binding entry of the protocol-group and VLANs. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.5.1 | RowprotocolVlanEntry | not-accessible | current | The binding entry of the protocol-group and VLANs. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.5.1.1 | ColumnprotocolVlanGroupId | not-accessible | current | The specified protocol group of a binding entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.5.1.2 | ColumnprotocolVlanGroupVid | read-write | current | The vlan index of the binding entry. The vid zero is used to delete the binding entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6 | NodevoiceVlanMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.1 | TablevoiceVlanOuiTable | not-accessible | current | A table containing the mac address which can be identified by voice vlan. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.1.1 | RowvoiceVlanOuiEntry | not-accessible | current | A table containing the mac address which can be identified by voice vlan. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.1.1.1 | ColumnvoiceVlanOuiAddress | not-accessible | current | MAC address can be identified by voice vlan. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.1.1.2 | ColumnvoiceVlanOuiMask | read-write | current | The mask of MAC address. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.1.1.3 | ColumnvoiceVlanOuiDescription | read-write | current | The description of oui. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.1.1.4 | ColumnvoiceVlanOuiStatus | read-create | current | Current operation status of the row. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.2 | ScalarvoiceVlanEnabledId | read-write | current | Voice vlan enable status: enabled (2..4095), disabled (-1). |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.3 | ScalarvoiceVlanAgingTime | read-write | current | Voice vlan aging time, the unit of which is minute. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.7 | TablevoiceVlanPortTable | not-accessible | current | A list of voice vlan mode entries. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.7.1 | RowvoiceVlanPortEntry | not-accessible | current | An entry containing voice vlan mode information, which is applicable to a voice vlan enabled interface. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.7.1.1 | ColumnvoiceVlanPortIfIndex | not-accessible | current | The index of interface on which voice vlan function is enabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.7.1.2 | ColumnvoiceVlanPortMode | read-write | current | Voice vlan configuration mode status. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.7.1.3 | ColumnvoiceVlanPortSecurity | read-write | current | If the security is enabled, the port is only allow voice traffuc for the voice vlan. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.7.1.4 | ColumnvoiceVlanPortPriority | read-write | current | The priority of the voice vlan traffic in the port. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.7.1.5 | ColumnvoiceVlanPortRuleOui | read-write | current | The address of voice device is learned from Oui table. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.6.7.1.6 | ColumnvoiceVlanPortRuleLldp | read-write | current | The address of voice device is learned from LLDP discovery. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.7 | NodevlanDot1qTunnelGlobalConfig | |||
| 1.3.6.1.4.1.3709.3.5.201.1.12.7.1 | ScalarvlanDot1qTunnelStatus | read-write | current | This parameter is used to globally enable/disable 802.1Q Tunneling on the device. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.8 | TablevlanDot1qTunnelPortTable | not-accessible | current | Table for port configuration in 802.1Q Tunneling. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.8.1 | RowvlanDot1qTunnelPortEntry | not-accessible | current | Entry for port configuration in 802.1Q Tunneling. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.8.1.1 | ColumnvlanDot1qTunnelPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.3709.3.5.201.1.12.8.1.2 | ColumnvlanDot1qTunnelPortMode | read-write | current | This variable sets the 802.1Q Tunneling mode. Setting it to none(1) indicates no mode in this port. Setting it to dot1qTunnel(2) sets as dot1q-tunnel mode port… |
| 1.3.6.1.4.1.3709.3.5.201.1.12.8.1.3 | ColumnvlanDot1qTunnelPortEtherType | read-write | current | TPID for 802.1Q encapsulation. It's used to select a nonstandard (nondefault) 2-byte ethertype to identify 802.1Q tagged frames. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.11 | TablemacVlanTable | not-accessible | current | A table that contains the settings for MAC-based VLAN. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.11.1 | RowmacVlanEntry | not-accessible | current | A conceptual row in the macVlanTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.11.1.1 | ColumnmacVlanMacAddress | not-accessible | current | The MAC address that may specify an entry in the table which contains MAC-based VLAN information. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.11.1.2 | ColumnmacVlanId | read-create | current | Specifies the VLAN ID which the MAC address associates with. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.11.1.4 | ColumnmacVlanStatus | read-create | current | Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.12 | ScalarmacVlanClearAction | read-write | current | Action for clearing macVlanTable. When this object is set to clear(2), all entries in macVlanTable will be cleared. When this object is read, the value of this… |
| 1.3.6.1.4.1.3709.3.5.201.1.12.13 | TablesubnetVlanTable | not-accessible | current | A table that contains the settings for IP subnet-based VLAN. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.13.1 | RowsubnetVlanEntry | not-accessible | current | A conceptual row in the subnetVlanTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.13.1.1 | ColumnsubnetVlanIpAddress | not-accessible | current | The IPv4 address of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of … |
| 1.3.6.1.4.1.3709.3.5.201.1.12.13.1.2 | ColumnsubnetVlanMask | not-accessible | current | The netmask of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x wit… |
| 1.3.6.1.4.1.3709.3.5.201.1.12.13.1.3 | ColumnsubnetVlanId | read-create | current | Specifies the VLAN ID which the subnet associates with. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.13.1.4 | ColumnsubnetVlanPriority | read-create | current | Specifies the priority whcich the subnet associates with. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.13.1.5 | ColumnsubnetVlanStatus | read-create | current | Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.12.14 | ScalarsubnetVlanClearAction | read-write | current | Action for clearing subnetVlanTable. When this object is set to clear(2), all entries in subnetVlanTable will be cleared. When this object is read, the value o… |
| 1.3.6.1.4.1.3709.3.5.201.1.13.1 | ScalarprioIpPrecDscpStatus | read-write | current | Selects whether no frame priority mapping, IP ToS precedence mapping or DSCP mapping is performed. |
| 1.3.6.1.4.1.3709.3.5.201.1.13.4 | TableprioIpDscpTable | not-accessible | current | Table for IP DSCP priority mapping. |
| 1.3.6.1.4.1.3709.3.5.201.1.13.4.1 | RowprioIpDscpEntry | not-accessible | current | Entry for IP DSCP priority mapping. |
| 1.3.6.1.4.1.3709.3.5.201.1.13.4.1.1 | ColumnprioIpDscpPort | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.3709.3.5.201.1.13.4.1.2 | ColumnprioIpDscpValue | not-accessible | current | Value of IP DSCP as specified in the packet header. |
| 1.3.6.1.4.1.3709.3.5.201.1.13.4.1.3 | ColumnprioIpDscpCos | read-write | current | Class of Service as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The prioIpDscpValue value in the same table row will be mapped to this Class of S… |
| 1.3.6.1.4.1.3709.3.5.201.1.13.5 | ScalarprioIpDscpRestoreDefault | read-write | current | Enables the IP DSCP settings of a port to be reset to their defaults. To reset the IP DSCP settings of a port, assign the value of the relevant ifIndex defined… |
| 1.3.6.1.4.1.3709.3.5.201.1.13.8 | NodeprioCopy | |||
| 1.3.6.1.4.1.3709.3.5.201.1.13.8.2 | ScalarprioCopyIpDscp | read-write | current | Action to copy IP DSCP settings from a source port to many destination ports. The first four octets represent an integer for the source port in high-to-low (bi… |
| 1.3.6.1.4.1.3709.3.5.201.1.13.9 | TableprioWrrTable | not-accessible | current | Table for weighted round robin (WRR). |
| 1.3.6.1.4.1.3709.3.5.201.1.13.9.1 | RowprioWrrEntry | not-accessible | current | Entry for weighted round robin (WRR). |
| 1.3.6.1.4.1.3709.3.5.201.1.13.9.1.1 | ColumnprioWrrTrafficClass | not-accessible | current | Traffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTraf… |
| 1.3.6.1.4.1.3709.3.5.201.1.13.9.1.2 | ColumnprioWrrWeight | read-write | current | Weight for this entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.13.10 | ScalarprioQueueMode | read-write | current | The global status for the prioQueue. wrr(1),strict(2) |
| 1.3.6.1.4.1.3709.3.5.201.1.14.1 | TabletrapDestTable | not-accessible | current | A list of trap destination entries. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.1.1 | RowtrapDestEntry | not-accessible | current | A destination entry describes the destination IP address, the community string, and SNMP version to use when sending a trap. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.1 | ColumntrapDestAddress | not-accessible | current | The address to send traps. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.2 | ColumntrapDestCommunity | read-create | current | A community to which this destination address belongs. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.3 | ColumntrapDestStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.4 | ColumntrapDestVersion | read-create | current | Determines the version of the trap that is to be sent to the trap receiver. If the value is 1, then an SNMP version 1 trap is sent and if the value is 2, an SN… |
| 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.5 | ColumntrapDestUdpPort | read-create | current | Determines the UDP port number that the trap will be sent to. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2 | NodetrapVar | |||
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.11 | ScalartrapVarLoginUserName | accessible-for-notify | current | The name of the user who logs into the switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.12 | ScalartrapVarLoginMethod | accessible-for-notify | current | The method by which the user logs in to control the switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.13 | ScalartrapVarLoginIPAddress | accessible-for-notify | current | The IP address from which the user logs into the switch. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.14 | ScalartrapVarLoginTime | accessible-for-notify | current | The date and time when the user logs into the switch. The format of this variables follows that of sysCurrentTime in this MIB file. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.18 | ScalartrapAutoUpgradeResult | accessible-for-notify | current | The parameter indicates which result triggers the trap. |
| 1.3.6.1.4.1.3709.3.5.201.1.14.2.19 | ScalartrapAutoUpgradeNewVer | accessible-for-notify | current | The parameter indicates new version which was upgraded to. When trapAutoUpgradeResult was failed(2), it would be null string. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1 | NodeprivateVlanMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.1 | ScalarprivateVlanStatus | read-write | current | This controls whether private VLAN is enabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.4 | TableprivateVlanVlanTable | not-accessible | current | A table containing private VLAN information on the VLANs which currently exist. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.4.1 | RowprivateVlanVlanEntry | not-accessible | current | A conceptual row containing the private VLAN information on the VLANs for a particular management domain. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.4.1.1 | ColumnprivateVlanVlanIndex | not-accessible | current | The VLAN ID of this private VLAN. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.4.1.2 | ColumnprivateVlanVlanType | read-create | current | The VLAN type as defined for Private VLAN feature. Set the value to invalid(1) to destroy an entry. Set other values to create an entry. If an index already ex… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.4.1.3 | ColumnprivateVlanAssoicatedPrimaryVlan | read-create | current | The VLAN ID of the associated primary VLAN used for the private VLAN feature if privateVlanVlanType has the value of isolated(3), community(4). If privateVlanV… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.5 | TableprivateVlanPrivatePortTable | not-accessible | current | A table containing information on the configuration of secondary VLANs on the device ports. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.5.1 | RowprivateVlanPrivatePortEntry | not-accessible | current | A conceptual row containing information of the configuration of secondary VLANs for each port. An entry is created by the managed system for each interface whi… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.5.1.1 | ColumnprivateVlanPrivatePortIfIndex | not-accessible | current | This is defined as the ifIndex. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.5.1.2 | ColumnprivateVlanPrivatePortSecondaryVlan | read-write | current | The VLAN ID of the secondary VLAN configured on this private port. A private port is a port that allows ingress traffic of the secondary VLAN as well as egress… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.6 | TableprivateVlanPromPortTable | not-accessible | current | A table containing secondary VLAN to primary VLAN remapping information on ports of the device. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.6.1 | RowprivateVlanPromPortEntry | not-accessible | current | A conceptual row containing secondary VLAN to primary VLAN remapping information for each port. An entry is created by the managed system for each interface wh… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.6.1.1 | ColumnprivateVlanPromPortIfIndex | not-accessible | current | This is defined as ifIndex. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.6.1.2 | ColumnprivateVlanPromPortPrimaryVlanId | read-write | current | The primary VLAN ID of the promiscous port. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.6.1.3 | ColumnprivateVlanPromPortSecondaryRemap | read-only | current | A string of octets containing one bit per VLAN in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 0 thr… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.6.1.4 | ColumnprivateVlanPromPortSecondaryRemap2k | read-only | current | A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 1024 through 2047 in the management domain on this port. The first octe… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.6.1.5 | ColumnprivateVlanPromPortSecondaryRemap3k | read-only | current | A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 2048 through 3071 in the management domain on this port. The first octe… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.6.1.6 | ColumnprivateVlanPromPortSecondaryRemap4k | read-only | current | A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 3072 through 4095 in the management domain on this port. The first octe… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.8 | TableprivateVlanSessionTable | not-accessible | current | Contains the settings for private VLAN Session. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.8.1 | RowprivateVlanSessionEntry | not-accessible | current | A conceptual row in the privateVlanSession table. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.8.1.1 | ColumnprivateVlanSessionId | not-accessible | current | The session ID that may specifiy certain entry in the table which contains private VLAN session information. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.8.1.2 | ColumnprivateVlanSessionUplinkPorts | read-create | current | This is the list of uplink ports for a session of private VLAN. They should not overlap with the privateVlanSessionPortDownlink of the same session, and they a… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.8.1.3 | ColumnprivateVlanSessionDownlinkPorts | read-create | current | This is the list of downlink ports for a session of private VLAN. They should not overlap with the privateVlanSessionPortUplink of the same session, and they a… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.8.1.4 | ColumnprivateVlanSessionStatus | read-create | current | Set this to valid(1) to create an entry. Sets this to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.1.9 | ScalarprivateVlanUplinkToUplink | read-write | current | Sets this to blocking(2) to deny the traffic of uplink ports between different sessions. Set this to forwarding(1) to allow the traffic of uplink ports between… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.2 | NodeportSecurityMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.2.1 | TableportSecPortTable | not-accessible | current | The port security(MAC binding) Table. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.2.1.1 | RowportSecPortEntry | not-accessible | current | The entry of portSecPortTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.2.1.1.1 | ColumnportSecPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.2.1.1.2 | ColumnportSecPortStatus | read-write | current | Set enabled(1) to enable port security and set disabled(2) to disable port security. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.2.1.1.3 | ColumnportSecAction | read-write | current | The corresponding actions that will take place when a port is under intrusion, when this variable is set to none(1), no action will be performed, when this var… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.2.1.1.4 | ColumnportSecMaxMacCount | read-write | current | The maximun number of MAC addresses that will be learned and locked. When we change the value of this variable, if the portSecPortStatus is enabled, we will di… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.4 | NoderadiusMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.4.1 | ScalarradiusServerGlobalAuthPort | read-write | current | Aauthentication port number for RADIUS server. When specified radius server do not set aauthentication port number, this value is used. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.4.2 | ScalarradiusServerGlobalAcctPort | read-write | current | Accounting port number of RADIUS server. When specified radius server do not set accounting port number, this value is used. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.4.3 | ScalarradiusServerGlobalKey | read-write | current | Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. When specified radius server do not set … |
| 1.3.6.1.4.1.3709.3.5.201.1.17.4.4 | ScalarradiusServerGlobalRetransmit | read-write | current | Maximum number of retransmissions for RADIUS. When specified radius server do not set maximum number of retransmissions, this value is used. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.4.5 | ScalarradiusServerGlobalTimeout | read-write | current | Timeout for RADIUS. When specified radius server do not set timeout, this value is used. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.4.7 | TableradiusServerTable | not-accessible | current | The table for RADIUS server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.4.7.1 | RowradiusServerEntry | not-accessible | current | The conceptual row for radiusServerTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.4.7.1.1 | ColumnradiusServerIndex | not-accessible | current | The RADIUS server index in the table. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.4.7.1.2 | ColumnradiusServerAddress | read-create | current | IP address of a RADIUS server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.4.7.1.3 | ColumnradiusServerAuthPortNumber | read-create | current | Authentication port number of RADIUS server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.4.7.1.4 | ColumnradiusServerAcctPortNumber | read-create | current | Accounting port number of RADIUS server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.4.7.1.5 | ColumnradiusServerKey | read-write | current | Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.4.7.1.6 | ColumnradiusServerRetransmit | read-write | current | Timeout for RADIUS. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.4.7.1.7 | ColumnradiusServerTimeout | read-write | current | Timeout for RADIUS. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.4.7.1.8 | ColumnradiusServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.5 | NodetacacsMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.5.2 | ScalartacacsPlusServerGlobalPortNumber | read-write | current | TCP port number of TACACS+ server. When specified TACACS+ server do not set TCP port number, this this value is used. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.5.3 | ScalartacacsPlusServerGlobalKey | read-write | current | The encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When thi… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.5.4 | TabletacacsPlusServerTable | not-accessible | current | The table for TACACS+ server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.5.4.1 | RowtacacsPlusServerEntry | not-accessible | current | The conceptual row for tacacsPlusServerTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.5.4.1.1 | ColumntacacsPlusServerIndex | not-accessible | current | TACACS+ server index. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.5.4.1.2 | ColumntacacsPlusServerAddress | read-create | current | IP address of a TACACS+ server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.5.4.1.3 | ColumntacacsPlusServerPortNumber | read-create | current | TCP port number of a TACACS+ server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.5.4.1.4 | ColumntacacsPlusServerKey | read-create | current | The encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When thi… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.5.4.1.8 | ColumntacacsPlusServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.5.4.1.9 | ColumntacacsPlusServerRetransmit | read-create | current | The maximum number of retransmissions for TACACS+. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.5.4.1.10 | ColumntacacsPlusServerTimeout | read-create | current | Timeout for TACACS+. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.5.5 | ScalartacacsPlusServerGlobalRetransmit | read-write | current | The maximum number of retransmissions for TACACS+ global server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.5.6 | ScalartacacsPlusServerGlobalTimeout | read-write | current | Timeout for TACACS+ global server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6 | NodesshMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.1 | ScalarsshServerStatus | read-write | current | The status of Secure Shell Server. Set this value to enabled(1) to enable SSH server, set this value to disabled(2) to disable the SSH server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.2 | ScalarsshServerMajorVersion | read-only | current | The major version of the SSH Server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.3 | ScalarsshServerMinorVersion | read-only | current | The minor version of the SSH Server. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.4 | ScalarsshTimeout | read-write | current | The time interval that the router waits for the SSH client to respond. The range is 1-120. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.5 | ScalarsshAuthRetries | read-write | current | The number of attempts after which the interface is reset. The range is 1-5. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.6 | TablesshConnInfoTable | not-accessible | current | The table for Secure Shell Connection. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.6.1 | RowsshConnInfoEntry | not-accessible | current | The conceptual row for sshConnInfoTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.6.1.1 | ColumnsshConnID | not-accessible | current | The connection ID of the Secure Shell Connection. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.6.1.2 | ColumnsshConnMajorVersion | read-only | current | The SSH major version. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.6.1.3 | ColumnsshConnMinorVersion | read-only | current | The SSH minor version. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.6.1.4 | ColumnsshConnEncryptionType | read-only | current | The encryption type of the SSH. none(1) means no encryption , des(2) means using DES encryption, tribeDes means using 3DES encryption. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.6.1.5 | ColumnsshConnStatus | read-only | current | The SSH connection State. negotiationStart(1) means the SSH is in its negotiation start state, authenticationStart(2) means the SSH is in authentication start … |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.6.1.6 | ColumnsshConnUserName | read-only | current | The user name of the connection. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.6.1.7 | ColumnsshDisconnect | read-write | current | Set the variable to disconnect the connection, noDisconnect(1) will always be obtained when reading this variable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.6.1.8 | ColumnsshConnEncryptionTypeStr | read-only | current | The encryption type of the SSH. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.7 | ScalarsshKeySize | read-write | current | The SSH server key size. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.8 | ScalarsshRsaHostKey1 | read-only | current | The RSA host key segment 1. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.9 | ScalarsshRsaHostKey2 | read-only | current | The RSA host key segment 2. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.10 | ScalarsshRsaHostKey3 | read-only | current | The RSA host key segment 3. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.11 | ScalarsshRsaHostKey4 | read-only | current | The RSA host key segment 4. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.12 | ScalarsshRsaHostKey5 | read-only | current | The RSA host key segment 5. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.13 | ScalarsshRsaHostKey6 | read-only | current | The RSA host key segment 6. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.14 | ScalarsshRsaHostKey7 | read-only | current | The RSA host key segment 7. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.15 | ScalarsshRsaHostKey8 | read-only | current | The RSA host key segment 8. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.16 | ScalarsshDsaHostKey1 | read-only | current | The DSA host key segment 1. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.17 | ScalarsshDsaHostKey2 | read-only | current | The DSA host key segment 2. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.18 | ScalarsshDsaHostKey3 | read-only | current | The DSA host key segment 3. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.19 | ScalarsshDsaHostKey4 | read-only | current | The DSA host key segment 4. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.20 | ScalarsshDsaHostKey5 | read-only | current | The DSA host key segment 5. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.21 | ScalarsshDsaHostKey6 | read-only | current | The DSA host key segment 6. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.22 | ScalarsshDsaHostKey7 | read-only | current | The DSA host key segment 7. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.23 | ScalarsshDsaHostKey8 | read-only | current | The DSA host key segment 8. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.24 | ScalarsshHostKeyGenAction | read-write | current | This variable is for host key generating. For the set behavior: Set it to genRsaKey(2) to generate the RSA host key, and to genDsaKey(3) to generate the DSA ho… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.25 | ScalarsshHostKeyGenStatus | read-only | current | The result of the last KeyGen status. if no key gen action has been performed. you will get unknown(1) status. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.26 | ScalarsshHostKeySaveAction | read-write | current | To save host key from memory to flash. For the set behavior: Set it to save(2) to perform the save operation. For the get behavior: You will get save(1) when t… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.27 | ScalarsshHostKeySaveStatus | read-only | current | The result of the last savekey status. If no save action has been performed, you will get unknown(1) status. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.28 | ScalarsshHostKeyDelAction | read-write | current | To delete the host key. For the set behavior: Set it to delRsaKey(2) to delete the RSA host key, to delDsaKey(3) to delete the DSA host key, or to delBothKeys(… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29 | TablesshUserTable | not-accessible | current | The conceptual table of all of sshUserEntry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1 | RowsshUserEntry | not-accessible | current | The conceptual row for sshUserTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.1 | ColumnsshUserName | not-accessible | current | User Name. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.2 | ColumnsshUserRsaKey1 | read-only | current | The RSA user key segment 1. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.3 | ColumnsshUserRsaKey2 | read-only | current | The RSA user key segment 2. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.4 | ColumnsshUserRsaKey3 | read-only | current | The RSA user key segment 3. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.5 | ColumnsshUserRsaKey4 | read-only | current | The RSA user key segment 4. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.6 | ColumnsshUserRsaKey5 | read-only | current | The RSA user key segment 5. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.7 | ColumnsshUserRsaKey6 | read-only | current | The RSA user key segment 6. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.8 | ColumnsshUserRsaKey7 | read-only | current | The RSA user key segment 7. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.9 | ColumnsshUserRsaKey8 | read-only | current | The RSA user key segment 8. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.10 | ColumnsshUserDsaKey1 | read-only | current | The DSA user key segment 1. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.11 | ColumnsshUserDsaKey2 | read-only | current | The DSA user key segment 2. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.12 | ColumnsshUserDsaKey3 | read-only | current | The DSA user key segment 3. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.13 | ColumnsshUserDsaKey4 | read-only | current | The DSA user key segment 4. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.14 | ColumnsshUserDsaKey5 | read-only | current | The DSA user key segment 5. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.15 | ColumnsshUserDsaKey6 | read-only | current | The DSA user key segment 6. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.16 | ColumnsshUserDsaKey7 | read-only | current | The DSA user key segment 7. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.17 | ColumnsshUserDsaKey8 | read-only | current | The DSA user key segment 8. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.29.1.18 | ColumnsshUserKeyDelAction | read-write | current | To delete the user key. For the set behavior: Set it to delRsaKey(2) to delete the RSA user key, to delDsaKey(3) to delete the DSA user key, or to delBothKeys(… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.30 | ScalarsshRsaHostKeySHA1FingerPrint | read-only | current | The SHA1 finger print of the RSA host key. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.31 | ScalarsshRsaHostKeyMD5FingerPrint | read-only | current | The MD5 finger print of RSA host key. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.32 | ScalarsshDsaHostKeySHA1FingerPrint | read-only | current | The SHA1 finger print of the DSA host key. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.6.33 | ScalarsshDsaHostKeyMD5FingerPrint | read-only | current | The MD5 finger print of the DSA host key. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.9 | NodeipFilterMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.9.1 | TableipFilterSnmpTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.9.1.1 | RowipFilterSnmpEntry | not-accessible | current | This entry includes an IP address range which the system will allow to connect to this device through SNMP. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.9.1.1.1 | ColumnipFilterSnmpStartAddress | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.9.1.1.2 | ColumnipFilterSnmpEndAddress | read-create | current | The end IP address. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.9.1.1.3 | ColumnipFilterSnmpStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.9.2 | TableipFilterHTTPTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.9.2.1 | RowipFilterHTTPEntry | not-accessible | current | This entry includes an IP address range which the system will allow to connect to this device through SNMP. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.9.2.1.1 | ColumnipFilterHTTPStartAddress | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.9.2.1.2 | ColumnipFilterHTTPEndAddress | read-create | current | The end IP address. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.9.2.1.3 | ColumnipFilterHTTPStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.9.3 | TableipFilterTelnetTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.9.3.1 | RowipFilterTelnetEntry | not-accessible | current | This entry includes an IP address range which the system will allow them to connect to this device through SNMP. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.9.3.1.1 | ColumnipFilterTelnetStartAddress | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.9.3.1.2 | ColumnipFilterTelnetEndAddress | read-create | current | The end IP address. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.9.3.1.3 | ColumnipFilterTelnetStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.11 | Nodedot1xMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.11.1 | Tabledot1xAuthConfigExtTable | not-accessible | current | The extension table of dot1xAuthConfigTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.11.1.1 | Rowdot1xAuthConfigExtEntry | not-accessible | current | The entry of dot1xAuthConfigExtTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.11.1.1.1 | Columndot1xAuthConfigExtOperMode | read-write | current | The operation mode of dot1x port which allows host connection to 802.1x-authorized ports. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.11.1.1.2 | Columndot1xAuthConfigExtMultiHostMaxCnt | read-write | current | The maximum number of hosts when the dot1xAuthConfigExtOperMode is multiHost(2). When the operation Mode is singleHost(1), we can ignore this variables. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.11.1.1.3 | Columndot1xAuthConfigExtPortIntrusionAction | read-write | current | Responses to intrusion when the authentication is failed; blockTraffic(1) means that to block traffic when the authentication is failed and guestVlan(2) means … |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12 | NodeaaaMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.1 | TableaaaMethodTable | not-accessible | current | Contains the settings needed for accounting. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.1.1 | RowaaaMethodEntry | not-accessible | current | A conceptual row in the aaaMethodTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.1.1.1 | ColumnaaaMethodIndex | not-accessible | current | Specifies the index for the entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.1.1.2 | ColumnaaaMethodName | read-create | current | Name for the method. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.1.1.3 | ColumnaaaMethodGroupName | read-create | current | Name for the server to use, pointing to aaaRadiusGroupName or aaaTacacsPlusGroupName. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.1.1.4 | ColumnaaaMethodMode | read-create | current | startStop(1),sends a 'start' accounting notice at the beginning of a process and a 'stop' accounting notice at the end of a process. The 'start' accounting rec… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.1.1.5 | ColumnaaaMethodStatus | read-create | current | Set to 1 to initiate the aaaMethodTable, 2 to destroy the table. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.1.1.6 | ColumnaaaMethodClientType | read-create | current | dot1x(1): Provides accounting service for 802.1x activity; exec(2): Provides accounting service for EXEC connection such as Telnet, SSH or console; commands(3)… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.1.1.7 | ColumnaaaMethodPrivilegeLevel | read-create | current | Specifies the privilege level for the entry. When aaaMethodClientType is in the mode of command(3), the privilege level is enabled to be accessed. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.2 | TableaaaRadiusGroupTable | not-accessible | current | Uses a subset of RADIUS servers for accounting as defined by the server group |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.2.1 | RowaaaRadiusGroupEntry | not-accessible | current | A conceptual row of aaaRadiusGroupEntry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.2.1.1 | ColumnaaaRadiusGroupIndex | not-accessible | current | Specifies the index for the entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.2.1.2 | ColumnaaaRadiusGroupServerBitMap | read-create | current | Identifies which RADIUS sever to use, each bit points to each radius server. 80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radi… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.2.1.3 | ColumnaaaRadiusGroupName | read-create | current | Uses a subset of servers for accounting as defined by the server group. The same name as aaaTacasPlusGroupName is not allowed. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.2.1.4 | ColumnaaaRadiusGroupStatus | read-create | current | Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.3 | TableaaaTacacsPlusGroupTable | not-accessible | current | Uses a subset of TACACS+ servers for accounting as defined by the server group |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.3.1 | RowaaaTacacsPlusGroupEntry | not-accessible | current | A conceptual row of aaaTacacsPlusGroupEntry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.3.1.1 | ColumnaaaTacacsPlusGroupIndex | not-accessible | current | Specifies the index for the entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.3.1.2 | ColumnaaaTacacsPlusGroupServerBitMap | read-create | current | Identifies which TACACS+ sever to use. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.3.1.3 | ColumnaaaTacacsPlusGroupName | read-create | current | Uses a subset of servers for accounting as defined by the server group. We can't have the same name as aaaRadiusGroupName |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.3.1.4 | ColumnaaaTacacsPlusGroupStatus | read-create | current | Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.4 | ScalaraaaUpdate | read-write | current | Specifies the periodic interim accounting records to be sent to the accounting server and periodic intervals to send accounting update records(in minutes). |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.5 | TableaaaAccountTable | not-accessible | current | Specifies an interface or a set of interfaces that the accounting method list will be applied to. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.5.1 | RowaaaAccountEntry | not-accessible | current | A conceptual row of aaaAccountTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.5.1.1 | ColumnaaaAccountIfIndex | not-accessible | current | Defined as the ifIndex |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.5.1.2 | ColumnaaaAccountMethodName | read-create | current | Specifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.5.1.3 | ColumnaaaAccountProtocol | read-only | current | Get the protocol type of a list method to know which server (RADIUS or TACACS+) is in use. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.5.1.4 | ColumnaaaAccountStatus | read-create | current | Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.8 | TableaaaCommandPrivilegesTable | not-accessible | current | Contains the settings needed for command privileges. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.8.1 | RowaaaCommandPrivilegesEntry | not-accessible | current | A conceptual row in the aaaCommandPrivilegesTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.8.1.1 | ColumnaaaCommandPrivilegesLevel | not-accessible | current | Specifies the privilege level index for the entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.8.1.2 | ColumnaaaCommandPrivilegesInterfaceIndex | not-accessible | current | Specifies the interface index for the entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.8.1.3 | ColumnaaaCommandPrivilegesMethodName | read-create | current | Specifies the method name in the lists under the mode of command privileges. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.9 | TableaaaAccExecTable | not-accessible | current | Specifies an interface or a set of interfaces that the accounting method list will be applied to. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.9.1 | RowaaaAccExecEntry | not-accessible | current | A conceptual row of aaaAccExecTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.9.1.1 | ColumnaaaAccExecIndex | not-accessible | current | The method of accessing CLI management. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.12.9.1.2 | ColumnaaaAccExecMethodName | read-create | current | Specifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13 | NodenetworkAccessMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.2 | TablenetworkAccessPortTable | not-accessible | current | A table contains the information of network access about every port. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.2.1 | RownetworkAccessPortEntry | not-accessible | current | A conceptual row in the networkAccessPort table. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.2.1.1 | ColumnnetworkAccessPortPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this port index is the same inte… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.2.1.3 | ColumnnetworkAccessPortMaxMacCount | read-write | current | Specifies the maximum number of authenticated MAC address. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.2.1.5 | ColumnnetworkAccessPortMacFilter | read-write | current | Specifies the MAC filter ID, Set this variable to zero to disable MAC filter. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.2.1.6 | ColumnnetworkAccessPortGuestVlan | read-write | current | Specifies the guest VLAN ID. To disable the VLAN, set the value to 0. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.2.1.7 | ColumnnetworkAccessPortLinkDetectionStatus | read-write | current | Set this object to enabled(1) to enable link detection. Set this object to disabled(2) to disable link detection. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.2.1.8 | ColumnnetworkAccessPortLinkDetectionMode | read-write | current | Specifies the detection event for a port. Set this object to linkUp(1) to detect a link-up event. Set this object to linkDown(2) to detect a link-down event. S… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.2.1.9 | ColumnnetworkAccessPortLinkDetectionAciton | read-write | current | Specifies the action to take when a networkAccessPortLinkDetection event is triggered. Set this object to trap(1) to send a trap when a networkAccessPortLinkDe… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.2.1.10 | ColumnnetworkAccessPortDynamicQos | read-write | current | Set this object to enabled(1) to enable Dynamic QoS. Set this object to disabled(2) to disable Dynamic QoS. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.3 | NodenetworkAccessClearMacAddressMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.3.1 | ScalarnetworkAccessClearMacAddressAttribute | read-write | current | Attribute for clearing Mac address. Specifies the certain attribute in Mac address table. all(1) indicates both reauthorized and learnt secure MAC address; sta… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.3.2 | ScalarnetworkAccessClearMacAddressMacAddress | read-write | current | Specifies MAC address in the MAC address table for clearing MAC address. '000000' represents that no MAC address is specified. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.3.3 | ScalarnetworkAccessClearMacAddressPort | read-write | current | The specifies port in the MAC address table for clearing MAC address. '0' represents that no port is specified. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.3.4 | ScalarnetworkAccessClearMacAddressAction | read-write | current | Action for clearing MAC address . When setting this object to clear(2) to begin the clearing MAC address operation, a particular MAC address is cleared from th… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.4 | TablenetworkAccessMacAddressTable | not-accessible | current | Contains the information of network access MAC addresses. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.4.1 | RownetworkAccessMacAddressEntry | not-accessible | current | A conceptual row in the networkAccessMacAddress table. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.4.1.1 | ColumnnetworkAccessMacAddressAddress | not-accessible | current | Specifies the authenticated MAC address. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.4.1.2 | ColumnnetworkAccessMacAddressPort | not-accessible | current | Specifies the port of authenticated MAC address. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.4.1.3 | ColumnnetworkAccessMacAddressInetAddressType | read-only | current | This object indicates the type of IP address denoted in networkAccessMacAddressRadiusServerInetAddress type. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.4.1.4 | ColumnnetworkAccessMacAddressRadiusServerInetAddress | read-only | current | Displays the IP address of radius server that authenticates the specified Mac address. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.4.1.5 | ColumnnetworkAccessMacAddressTime | read-only | current | Displays the authentication time of the authenticated MAC address. The following form is a text string; 'yyyy MMm DDd HHh MMm SSs'. 'yyyy' is a four-digit year… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.4.1.6 | ColumnnetworkAccessMacAddressAttribute | read-only | current | Displays the attribute of an authenticated MAC address. static(1) indicates resauthorized secure MAC address. dynamic(2) indicates learnt secure MAC address. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.5 | ScalarnetworkAccessAging | read-write | current | Set this object to enabled(1) to enable MAC address aging feature. Set this object to disabled(2) to disable MAC address aging feature. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.6 | TablenetworkAccessMacFilterWithMaskTable | not-accessible | current | Contains the settings for MAC filter. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.6.1 | RownetworkAccessMacFilterWithMaskEntry | not-accessible | current | A conceptual row in the networkAccessMacFilterWithMaskTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.6.1.1 | ColumnnetworkAccessMacFilterWithMaskID | not-accessible | current | Specifies the MAC filter ID. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.6.1.2 | ColumnnetworkAccessMacFilterWithMaskMacAddress | not-accessible | current | Specifies the MAC address to be filtered. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.6.1.3 | ColumnnetworkAccessMacFilterWithMaskMacAddressMask | not-accessible | current | Specifies the MAC mask to be filtered. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.13.6.1.4 | ColumnnetworkAccessMacFilterWithMaskStatus | read-create | current | Set this object to valid(1) to create an entry. Set this object to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.14 | NodemacAuthMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.14.1 | ScalarmacAuthReauthTime | read-write | current | Specifies the reauthentication time period. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.14.2 | TablemacAuthPortTable | not-accessible | current | Contains the settings for mac authentication of each port. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.14.2.1 | RowmacAuthPortEntry | not-accessible | current | A conceptual row in the macAuthPort table. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.14.2.1.1 | ColumnmacAuthPortIndex | not-accessible | current | The port and the trunk (including trunk members) interface of the port table. The interface identified by a particular value of this index is the same interfac… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.14.2.1.2 | ColumnmacAuthPortMaxMacCount | read-write | current | Specifies the maximum number of authenticated MAC addresses for MAC authentication. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.14.2.1.3 | ColumnmacAuthPortIntrusionAction | read-write | current | Responses to intrusion when the authentication is failed. blockTraffic(1) : denies network access to an unauthorized client; passTraffic(2) : allows unauthoriz… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15 | NodewebAuthMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.1 | ScalarwebAuthSystemAuthControl | read-write | current | Sets enabled(1) to enable WebAuth feature and sets disabled(2) to disable WebAuth feature. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.5 | ScalarwebAuthSessionTimeout | read-write | current | For authenticated success users, they can use internet service during a certain period. Whenever this period expires, users need to be re-authenticated again. … |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.6 | ScalarwebAuthQuietPeriod | read-write | current | Specifies the re-authentication interval when the authentication fail attempts reach the webAuthLoginAttempts value. Unauthenticated user won't be authenticate… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.7 | ScalarwebAuthLoginAttempts | read-write | current | Specifies the counter that configures the authentication fail times for a client. If authentication fail times reaches the specified value, the client are not … |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.8 | NodewebAuthReauthenticateMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.8.1 | ScalarwebAuthReauthenticatePort | read-write | current | Specifies the port to re-authenticate for all of its authenticated hosts. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.8.2 | ScalarwebAuthReauthenticateInetAddressType | read-write | current | Specifies host type to re-authenticate. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.8.3 | ScalarwebAuthReauthenticateInetAddress | read-write | current | Specificies host to re-authenticate. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.8.4 | ScalarwebAuthReauthenticateAction | read-write | current | Action for WebAuth re-authenication. When setting this object to reauth(2) to begin the re-authenticated operation, a particular user is re-authenticated. When… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.9 | TablewebAuthPortConfigTable | not-accessible | current | Contains the settings for web authentication of each port. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.9.1 | RowwebAuthPortConfigEntry | not-accessible | current | A conceptual row in the webAuthPortConfigTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.9.1.1 | ColumnwebAuthPortConfigPortIndex | not-accessible | current | The port number of the port that may specify certain entry in the table which contains web authentication information. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.9.1.2 | ColumnwebAuthPortConfigStatus | read-write | current | Sets enabled(1) to enable web authentication feature for each port and sets disabled(2) to disable web authentication for each port. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.9.1.3 | ColumnwebAuthPortConfigAuthenticatedHostCount | read-only | current | Displays the authenticated host counts for each port |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.10 | TablewebAuthPortInfoTable | not-accessible | current | Contains the information for web authentication of each port. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.10.1 | RowwebAuthPortInfoEntry | not-accessible | current | A conceptual row in the webAuthPortTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.10.1.1 | ColumnwebAuthPortInfoPortIndex | not-accessible | current | The port number for which this entry contains web authentication information. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.10.1.2 | ColumnwebAuthPortInfoPortAuthSuccessIndex | not-accessible | current | The authentication success number of port for which this entry contains web authentication information. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.10.1.3 | ColumnwebAuthPortInfoInetAddressType | read-only | current | This object indicates the type of IP address denoted in webAuthPortInfoIpAddress type. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.10.1.4 | ColumnwebAuthPortInfoInetAddress | read-only | current | The IP address which may specify the entry containing web authentication information. |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.10.1.5 | ColumnwebAuthPortInfoRemainingSessiontime | read-only | current | The remaining session time for authenticated hosts. During this period, they may use internet resource. When the session time expires, they will need to re-aut… |
| 1.3.6.1.4.1.3709.3.5.201.1.17.15.10.1.6 | ColumnwebAuthPortInfoStatus | read-only | current | Displays the web authentication status for each port. authenticated (1) means the user is authenticated. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.1 | ScalarsysLogStatus | read-write | current | Whether the system log is enabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.2 | ScalarsysLogHistoryFlashLevel | read-write | current | Severity level for logging to flash. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.3 | ScalarsysLogHistoryRamLevel | read-write | current | Severity level for logging to RAM. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.6 | NoderemoteLogMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.19.6.1 | ScalarremoteLogStatus | read-write | current | Whether the remote log system is enabled. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.6.2 | ScalarremoteLogLevel | read-write | current | Severity level for remote log. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.6.3 | ScalarremoteLogFacilityType | read-write | current | The facility type for remote log. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.6.4 | TableremoteLogServerTable | not-accessible | current | A Table for storing the remote log Server list. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1 | RowremoteLogServerEntry | not-accessible | current | A conceptually row for remoteLogServerTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.1 | ColumnremoteLogServerIp | not-accessible | current | The IP address of the remote log Server. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.2 | ColumnremoteLogServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.7 | NodesmtpMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.19.7.1 | ScalarsmtpStatus | read-write | current | Set enabled(1) to enable the SMTP, set disabled(2) to disable the SMTP. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.7.2 | ScalarsmtpSeverityLevel | read-write | current | Specify the SMTP minimum severity level to send the event message. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.7.3 | ScalarsmtpSourceEMail | read-write | current | SMTP source email address, the sender's mail address that appears in the 'From' field of the mail. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.7.4 | TablesmtpServerIpTable | not-accessible | current | The SMTP server IP table. The maximum servers to be added is 3. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.7.4.1 | RowsmtpServerIpEntry | not-accessible | current | A conceptual row of the smtpServerIpTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.7.4.1.1 | ColumnsmtpServerIp | not-accessible | current | SMTP mail server's IP address. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.7.4.1.2 | ColumnsmtpServerIpStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.7.5 | TablesmtpDestEMailTable | not-accessible | current | The table of the destination e-mail address. The maximum numbers of destination email address to be added is 5. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.7.5.1 | RowsmtpDestEMailEntry | not-accessible | current | A conceptual row of the smtpDestEMailTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.7.5.1.1 | ColumnsmtpDestEMail | not-accessible | current | SMTP destination e-mail address. |
| 1.3.6.1.4.1.3709.3.5.201.1.19.7.5.1.2 | ColumnsmtpDestEMailStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.1 | NodesntpMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.20.1.1 | ScalarsntpStatus | read-write | current | Set enabled(1) to enable the SNTP, set disabled(2) to disable the SNTP. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.1.2 | ScalarsntpServiceMode | read-write | current | Service mode. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.1.3 | ScalarsntpPollInterval | read-write | current | Polling interval. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.1.4 | TablesntpServerTable | not-accessible | current | Table for SNTP servers |
| 1.3.6.1.4.1.3709.3.5.201.1.20.1.4.1 | RowsntpServerEntry | not-accessible | current | Entry for SNTP servers. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.1.4.1.1 | ColumnsntpServerIndex | not-accessible | current | The index of a server. This table has fixed size. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.1.4.1.2 | ColumnsntpServerIpAddress | read-write | current | The IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index are 0. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.2 | ScalarsysCurrentTime | read-write | current | This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is… |
| 1.3.6.1.4.1.3709.3.5.201.1.20.3 | ScalarsysTimeZone | read-write | current | This is a text string in the following form: '[s]hh:mm'. '[s]' is a plus-or-minus sign. For UTC, this is omitted. For a positive offset, this is '+'. For a neg… |
| 1.3.6.1.4.1.3709.3.5.201.1.20.4 | ScalarsysTimeZoneName | read-write | current | The name of the time zone. When sysTimeZonePredefined object is set to any value other than none(1), this object will be empty string. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.5 | NodentpMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.20.5.1 | ScalarntpStatus | read-write | current | Set enabled(1) to enable the NTP, set disabled(2) to disable the NTP. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.5.2 | ScalarntpServiceMode | read-write | current | Service mode. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.5.3 | ScalarntpPollInterval | read-only | current | Polling interval in seconds. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.5.4 | ScalarntpAuthenticateStatus | read-write | current | Set enabled(1) to enable the NTP Authenticate, set disabled(2) to disable the NTP. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.5.5 | TablentpServerTable | not-accessible | current | Table for NTP servers |
| 1.3.6.1.4.1.3709.3.5.201.1.20.5.5.1 | RowntpServerEntry | not-accessible | current | Entry for NTP servers. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.5.5.1.1 | ColumnntpServerIpAddress | not-accessible | current | The IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index is 0. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.5.5.1.2 | ColumnntpServerVersion | read-create | current | NTP version. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.5.5.1.3 | ColumnntpServerKeyId | read-write | current | Key for a NTP server. This variable can only be written. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.5.5.1.4 | ColumnntpServerStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.3709.3.5.201.1.20.5.6 | TablentpAuthKeyTable | not-accessible | current | Table for NTP Authentication keys |
| 1.3.6.1.4.1.3709.3.5.201.1.20.5.6.1 | RowntpAuthKeyEntry | not-accessible | current | Entry for NTP Authentication keys. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.5.6.1.1 | ColumnntpAuthKeyId | not-accessible | current | The index of a Authentication key. This table has fixed size. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.5.6.1.2 | ColumnntpAuthKeyWord | read-create | current | The Authentication key word is used to created a key by the MD5 And the max length is 32. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.5.6.1.3 | ColumnntpAuthKeyStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.3709.3.5.201.1.20.6 | ScalarsysTimeZonePredefined | read-write | current | Specifies the time zone predefined mode. If time zone is configured by sysTimeZone object, the value field will be none(1). When this variable is set to any va… |
| 1.3.6.1.4.1.3709.3.5.201.1.20.7 | NodesysSummerTimeMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.20.7.1 | ScalarsysSummerTimeZoneName | read-write | current | The name of the summer time zone. If sysSummerTimeMode is disabled, empty string will be shown. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.7.2 | ScalarsysSummerTimeMode | read-write | current | The mode of the summer time. |
| 1.3.6.1.4.1.3709.3.5.201.1.20.7.3 | ScalarsysSummerTimeRecurringTime | read-write | current | This is a text string in the following form, based on Unix: 'www Ddd Mmm hh:mm - www Ddd Mmm hh:mm'. 'www' is the week number of the month. The range of 'www' … |
| 1.3.6.1.4.1.3709.3.5.201.1.20.7.4 | ScalarsysSummerTimeDateTime | read-write | current | This is a text string in the following form, based on Unix: 'Mmm _d yyyy hh:mm - Mmm _d yyyy hh:mm'. 'Mmm' are the first three letters of the month. '_d' is th… |
| 1.3.6.1.4.1.3709.3.5.201.1.20.7.5 | ScalarsysSummerTimePredefinedRegion | read-write | current | The region of the summer time predefined mode. The offset of predefined mode is 60 minutes. When sysSummerTimeMode is predefined(4), the object can be modified… |
| 1.3.6.1.4.1.3709.3.5.201.1.20.7.6 | ScalarsysSummerTimeOffset | read-write | current | Specifies the number of minutes to add during summer time. When sysSummerTimeMode is recurring(2) or date(3), offset time can be modified. Zero will be shown w… |
| 1.3.6.1.4.1.3709.3.5.201.1.20.7.7 | ScalarsysSummerTimeEffect | read-only | current | This flag indicates whether summer time is in effect. A value of true(1) indicates summer time is in effect. A value of false(2) indicates summer time is not i… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1 | NodefileCopyMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.1 | ScalarfileCopySrcOperType | read-write | current | The Copy Operation that we want to perform on the fileCopyDestOperType, this operation is similar to the CLI command 'copy fileCopySrcOperType fileCopyDestOper… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.2 | ScalarfileCopySrcFileName | read-write | current | The source file name for fileCopyMgt when a copy operation is next requested via this MIB. This value is set to a zero length string when no file name has been… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.3 | ScalarfileCopyDestOperType | read-write | current | The Copy Operation that we want to perform on fileCopySrcOperType, this operation is similar to the CLI command 'copy fileCopySrcOperType fileCopyDestOperType'… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.4 | ScalarfileCopyDestFileName | read-write | current | The destination file name for fileCopyMgt when a copy operation is next requested via this MIB. This value is set to a zero length string when no file name has… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.5 | ScalarfileCopyFileType | read-write | current | Type of file to copy in fileCopyMgt. opcode(1) indicates operation code, config(2) indicates configuration file, bootRom(3) indicates diagnostic image file and… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.6 | ScalarfileCopyTftpServer | read-write | current | The IP address of the TFTP server for transfer when a download is next requested via this MIB. This value is set to '0.0.0.0' when no IP address has been speci… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.7 | ScalarfileCopyUnitId | read-write | current | Specifies the switch unit for stackable devices. When performing the 'copy unit file' or 'copy file unit' action, if neither fileCopySrcOperType nor fileCopyDe… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.8 | ScalarfileCopyAction | read-write | current | Setting this object to copy(2) to begin the copy operation. When the device is not copying, this object will have a value of notCopying(1). |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.9 | ScalarfileCopyStatus | read-only | current | The status of the last copy procedure, if any. This object will have a value of fileCopyUnknown(18) if no copy operation has been performed. If the fileCopyDes… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.12 | ScalarfileCopyFtpLoginUsername | read-write | current | Login username of the FTP server. If neither fileCopySrcOperType nor fileCopyDestOperType is ftp(7), this variable can be ignored. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.13 | ScalarfileCopyFtpLoginPassword | read-write | current | Login password of the FTP server. If neither fileCopySrcOperType nor fileCopyDestOperType is ftp(7), this variable can be ignored. This variable can only be wr… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.15 | NodefileCopyOam | |||
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.15.1 | ScalarfileCopyOamPorts | read-write | current | The port list which ports on the bitmap perform remote firmware upgrade. Note: If the fileCopyDestOperType is not oamRemote(9), this variable can be ignored. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.15.2 | TablefileCopyOamResultTable | not-accessible | current | Table for OAM remote firmware upgrade result. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.15.2.1 | RowfileCopyOamResultEntry | not-accessible | current | A result entry for OAM remote firmware upgrade. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.15.2.1.1 | ColumnfileCopyOamLocalIfIndex | not-accessible | current | The ifIndex value of the port excluding trunk. The interface identified by a particular value of this index is the same interface as identified by the same val… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.1.15.2.1.2 | ColumnfileCopyOamResult | read-only | current | The status of the last firmware upgrade procedure. This object will have a value of oamStatusUnknown(2) if no firmware upgrade operation has been performed. Th… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.2 | NodefileInfoMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.21.2.1 | TablefileInfoTable | not-accessible | current | This table contain the information of the file system; we can also perform the delete, set startup file operation. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.2.1.1 | RowfileInfoEntry | not-accessible | current | A conceptually row for fileInfoTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.2.1.1.1 | ColumnfileInfoUnitID | not-accessible | current | The switch unit in a stacking system, in a non-stacking system, this value is always 1. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.2.1.1.2 | ColumnfileInfoFileName | not-accessible | current | The file Name of the file System in the device. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.2.1.1.3 | ColumnfileInfoFileType | read-only | current | The file type of the file System in the device. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.2.1.1.4 | ColumnfileInfoIsStartUp | read-write | current | This flag indicate whether this file is a startup file. Set this object to true(1) to indicate that this is a startup file. Setting this object to false(2) is … |
| 1.3.6.1.4.1.3709.3.5.201.1.21.2.1.1.5 | ColumnfileInfoFileSize | read-only | current | The sizes( in bytes) of the file. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.2.1.1.6 | ColumnfileInfoCreationTime | read-only | current | The creation time of the file, This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the Eng… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.2.1.1.7 | ColumnfileInfoDelete | read-write | current | Write this object to delete(2) to delete a file, when read, this always return noDelete(1). |
| 1.3.6.1.4.1.3709.3.5.201.1.21.3 | TablefileAutoDownloadResultTable | not-accessible | current | This table contains file auto download result information. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.3.1 | RowfileAutoDownloadResultEntry | not-accessible | current | A conceptual row for fileAutoDownloadResultTable. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.3.1.1 | ColumnfileAutoDownloadResultUnitID | not-accessible | current | The switch unit in a stacking system, in a non-stacking system, this value is always 1. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.3.1.2 | ColumnfileAutoDownloadResultAction | read-only | current | The status of the auto download action. value copying(2) will be obtained if the auto download action is currently processing, or value notCopying(1) will be o… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.3.1.3 | ColumnfileAutoDownloadResultStatus | read-only | current | The last auto download result status. value fileCopyUnknown(18) will be obtained if no download action has been performed before. |
| 1.3.6.1.4.1.3709.3.5.201.1.21.4 | NodefileAutoUpgradeMgt | |||
| 1.3.6.1.4.1.3709.3.5.201.1.21.4.1 | ScalarfileAutoUpgradeOpCodeStatus | read-write | current | Set this variable to enabled(1) to enable the device to automatically upgrade the current software image when a new version is detected. Set this variable to d… |
| 1.3.6.1.4.1.3709.3.5.201.1.21.4.2 | ScalarfileAutoUpgradeOpCodePath | read-write | current | The URL (Universal Resource Location) of the image file location for automatic upgrades. The URL schema can be set to TFTP or FTP. The Hostname is the IP addre… |